- 01 Sep, 2017 7 commits
-
-
Brian Foster authored
xfs_buf_item_unlock() historically checked the dirty state of the buffer by manually checking the buffer log formats for dirty segments. The introduction of ordered buffers invalidated this check because ordered buffers have dirty bli's but no dirty (logged) segments. The check was updated to accommodate ordered buffers by looking at the bli state first and considering the blf only if the bli is clean. This logic is safe but unnecessary. There is no valid case where the bli is clean yet the blf has dirty segments. The bli is set dirty whenever the blf is logged (via xfs_trans_log_buf()) and the blf is cleared in the only place BLI_DIRTY is cleared (xfs_trans_binval()). Remove the conditional blf dirty checks and replace with an assert that should catch any discrepencies between bli and blf dirty states. Refactor the old blf dirty check into a helper function to be used by the assert. Signed-off-by:
Brian Foster <bfoster@redhat.com> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
-
Brian Foster authored
It checks a single flag and has one caller. It probably isn't worth its own function. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Christoph Hellwig authored
And instead require callers to explicitly join the inode using xfs_defer_ijoin. Also consolidate the defer error handling in a few places using a goto label. Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
-
Christoph Hellwig authored
Split xfs_trans_roll into a low-level helper that just rolls the actual transaction and a new higher level xfs_trans_roll_inode that takes care of logging and rejoining the inode. This gets rid of the NULL inode case, and allows to simplify the special cases in the deferred operation code. Signed-off-by:
-
Omar Sandoval authored
After xfs_ifree_cluster() finds an inode in the radix tree and verifies that the inode number is what it expected, xfs_reclaim_inode() can swoop in and free it. xfs_ifree_cluster() will then happily continue working on the freed inode. Most importantly, it will mark the inode stale, which will probably be overwritten when the inode slab object is reallocated, but if it has already been reallocated then we can end up with an inode spuriously marked stale. In 8a17d7dd ("xfs: mark reclaimed inodes invalid earlier") we added a second check to xfs_iflush_cluster() to detect this race, but the similar RCU lookup in xfs_ifree_cluster() needs the same treatment. Signed-off-by:
Omar Sandoval <osandov@fb.com> Reviewed-by:
-
Darrick J. Wong authored
When we introduced the bmap redo log items, we set MS_ACTIVE on the mountpoint and XFS_IRECOVERY on the inode to prevent unlinked inodes from being truncated prematurely during log recovery. This also had the effect of putting linked inodes on the lru instead of evicting them. Unfortunately, we neglected to find all those unreferenced lru inodes and evict them after finishing log recovery, which means that we leak them if anything goes wrong in the rest of xfs_mountfs, because the lru is only cleaned out on unmount. Therefore, evict unreferenced inodes in the lru list immediately after clearing MS_ACTIVE. Fixes: 17c12bcd ("xfs: when replaying bmap operations, don't let unlinked inodes get reaped") Signed-off-by:
-
- 22 Aug, 2017 11 commits
-
-
Carlos Maiolino authored
In a filesystem without finobt, the Space manager selects an AG to alloc a new inode, where xfs_dialloc_ag_inobt() will search the AG for the free slot chunk. When the new inode is in the same AG as its parent, the btree will be searched starting on the parent's record, and then retried from the top if no slot is available beyond the parent's record. To exit this loop though, xfs_dialloc_ag_inobt() relies on the fact that the btree must have a free slot available, once its callers relied on the agi->freecount when deciding how/where to allocate this new inode. In the case when the agi->freecount is corrupted, showing available inodes in an AG, when in fact there is none, this becomes an infinite loop. Add a way to stop the loop when a free slot is not found in the btree, making the function to fall into the whole AG scan which will then, be able to detect the corruption and shut the filesystem down. As pointed by Brian, this might impact performance, giving the fact we don't reset the search distance anymore when we reach the end of the tree, giving it fewer tries before falling back to the whole AG search, but it will only affect searches that start within 10 records to the end of the tree. Signed-off-by:
Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by:
-
Brian Foster authored
Torn write detection and tail overwrite detection can shift the log head and tail respectively in the event of CRC mismatch or corruption errors. Add a high-level log recovery tracepoint to dump the final log head/tail and make those values easily attainable in debug/diagnostic situations. Signed-off-by:
-
Brian Foster authored
Torn write and tail overwrite detection both trigger only on -EFSBADCRC errors. While this is the most likely failure scenario for each condition, -EFSCORRUPTED is still possible in certain cases depending on what ends up on disk when a torn write or partial tail overwrite occurs. For example, an invalid log record h_len can lead to an -EFSCORRUPTED error when running the log recovery CRC pass. Therefore, update log head and tail verification to trigger the associated head/tail fixups in the event of -EFSCORRUPTED errors along with -EFSBADCRC. Also, -EFSCORRUPTED can currently be returned from xlog_do_recovery_pass() before rhead_blk is initialized if the first record encountered happens to be corrupted. This leads to an incorrect 'first_bad' return value. Initialize rhead_blk earlier in the function to address that problem as well. Signed-off-by:
-
Brian Foster authored
Add an error injection tag to force log items in the AIL to the pinned state. This option can be used by test infrastructure to induce head behind tail conditions. Specifically, this is intended to be used by xfstests to reproduce log recovery problems after failed/corrupted log writes overwrite the last good tail LSN in the log. When enabled, AIL push attempts see log items in the AIL in the pinned state. This stalls metadata writeback and thus prevents the current tail of the log from moving forward. When disabled, subsequent AIL pushes observe the log items in their appropriate state and filesystem operation continues as normal. Signed-off-by:
-
Brian Foster authored
If we consider the case where the tail (T) of the log is pinned long enough for the head (H) to push and block behind the tail, we can end up blocked in the following state without enough free space (f) in the log to satisfy a transaction reservation: 0 phys. log N [-------HffT---H'--T'---] The last good record in the log (before H) refers to T. The tail eventually pushes forward (T') leaving more free space in the log for writes to H. At this point, suppose space frees up in the log for the maximum of 8 in-core log buffers to start flushing out to the log. If this pushes the head from H to H', these next writes overwrite the previous tail T. This is safe because the items logged from T to T' have been written back and removed from the AIL. If the next log writes (H -> H') happen to fail and result in partial records in the log, the filesystem shuts down having overwritten T with invalid data. Log recovery correctly locates H on the subsequent mount, but H still refers to the now corrupted tail T. This results in log corruption errors and recovery failure. Since the tail overwrite results from otherwise correct runtime behavior, it is up to log recovery to try and deal with this situation. Update log recovery tail verification to run a CRC pass from the first record past the tail to the head. This facilitates error detection at T and moves the recovery tail to the first good record past H' (similar to truncating the head on torn write detection). If corruption is detected beyond the range possibly affected by the max number of iclogs, the log is legitimately corrupted and log recovery failure is expected. Signed-off-by:
-
Brian Foster authored
Log tail verification currently only occurs when torn writes are detected at the head of the log. This was introduced because a change in the head block due to torn writes can lead to a change in the tail block (each log record header references the current tail) and the tail block should be verified before log recovery proceeds. Tail corruption is possible outside of torn write scenarios, however. For example, partial log writes can be detected and cleared during the initial head/tail block discovery process. If the partial write coincides with a tail overwrite, the log tail is corrupted and recovery fails. To facilitate correct handling of log tail overwites, update log recovery to always perform tail verification. This is necessary to detect potential tail overwrite conditions when torn writes may not have occurred. This changes normal (i.e., no torn writes) recovery behavior slightly to detect and return CRC related errors near the tail before actual recovery starts. Signed-off-by:
-
Brian Foster authored
The high-level log recovery algorithm consists of two loops that walk the physical log and process log records from the tail to the head. The first loop handles the case where the tail is beyond the head and processes records up to the end of the physical log. The subsequent loop processes records from the beginning of the physical log to the head. Because log records can wrap around the end of the physical log, the first loop mentioned above must handle this case appropriately. Records are processed from in-core buffers, which means that this algorithm must split the reads of such records into two partial I/Os: 1.) from the beginning of the record to the end of the log and 2.) from the beginning of the log to the end of the record. This is further complicated by the fact that the log record header and log record data are read into independent buffers. The current handling of each buffer correctly splits the reads when either the header or data starts before the end of the log and wraps around the end. The data read does not correctly handle the case where the prior header read wrapped or ends on the physical log end boundary. blk_no is incremented to or beyond the log end after the header read to point to the record data, but the split data read logic triggers, attempts to read from an invalid log block and ultimately causes log recovery to fail. This can be reproduced fairly reliably via xfstests tests generic/047 and generic/388 with large iclog sizes (256k) and small (10M) logs. If the record header read has pushed beyond the end of the physical log, the subsequent data read is actually contiguous. Update the data read logic to detect the case where blk_no has wrapped, mod it against the log size to read from the correct address and issue one contiguous read for the log data buffer. The log record is processed as normal from the buffer(s), the loop exits after the current iteration and the subsequent loop picks up with the first new record after the start of the log. Signed-off-by:
-
Carlos Maiolino authored
When a buffer has been failed during writeback, the inode items into it are kept flush locked, and are never resubmitted due the flush lock, so, if any buffer fails to be written, the items in AIL are never written to disk and never unlocked. This causes unmount operation to hang due these items flush locked in AIL, but this also causes the items in AIL to never be written back, even when the IO device comes back to normal. I've been testing this patch with a DM-thin device, creating a filesystem larger than the real device. When writing enough data to fill the DM-thin device, XFS receives ENOSPC errors from the device, and keep spinning on xfsaild (when 'retry forever' configuration is set). At this point, the filesystem can not be unmounted because of the flush locked items in AIL, but worse, the items in AIL are never retried at all (once xfs_inode_item_push() will skip the items that are flush locked), even if the underlying DM-thin device is expanded to the proper size. This patch fixes both cases, retrying any item that has been failed previously, using the infra-structure provided by the previous patch. Reviewed-by:
-
Carlos Maiolino authored
With the current code, XFS never re-submit a failed buffer for IO, because the failed item in the buffer is kept in the flush locked state forever. To be able to resubmit an log item for IO, we need a way to mark an item as failed, if, for any reason the buffer which the item belonged to failed during writeback. Add a new log item callback to be used after an IO completion failure and make the needed clean ups. Reviewed-by:
-
Eric Sandeen authored
When we do log recovery on a readonly mount, unlinked inode processing does not happen due to the readonly checks in xfs_inactive(), which are trying to prevent any I/O on a readonly mount. This is misguided - we do I/O on readonly mounts all the time, for consistency; for example, log recovery. So do the same RDONLY flag twiddling around xfs_log_mount_finish() as we do around xfs_log_mount(), for the same reason. This all cries out for a big rework but for now this is a simple fix to an obvious problem. Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Reviewed-by:
-
Eric Sandeen authored
There are dueling comments in the xfs code about intent for log writes when unmounting a readonly filesystem. In xfs_mountfs, we see the intent: /* * Now the log is fully replayed, we can transition to full read-only * mode for read-only mounts. This will sync all the metadata and clean * the log so that the recovery we just performed does not have to be * replayed again on the next mount. */ and it calls xfs_quiesce_attr(), but by the time we get to xfs_log_unmount_write(), it returns early for a RDONLY mount: * Don't write out unmount record on read-only mounts. Because of this, sequential ro mounts of a filesystem with a dirty log will replay the log each time, which seems odd. Fix this by writing an unmount record even for RO mounts, as long as norecovery wasn't specified (don't write a clean log record if a dirty log may still be there!) and the log device is writable. Signed-off-by:
-
- 21 Aug, 2017 12 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds authored
Pull sparc fixes from David Miller: "Just a couple small fixes, two of which have to do with gcc-7: 1) Don't clobber kernel fixed registers in __multi4 libgcc helper. 2) Fix a new uninitialized variable warning on sparc32 with gcc-7, from Thomas Petazzoni. 3) Adjust pmd_t initializer on sparc32 to make gcc happy. 4) If ATU isn't available, don't bark in the logs. From Tushar Dave" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: kernel/pcic: silence gcc 7.x warning in pcibios_fixup_bus() sparc64: remove unnecessary log message sparc64: Don't clibber fixed registers in __multi4. mm: add pmd_t initializer __pmd() to work around a GCC bug. -
Thomas Petazzoni authored
When building the kernel for Sparc using gcc 7.x, the build fails with: arch/sparc/kernel/pcic.c: In function ‘pcibios_fixup_bus’: arch/sparc/kernel/pcic.c:647:8: error: ‘cmd’ may be used uninitialized in this function [-Werror=maybe-uninitialized] cmd |= PCI_COMMAND_IO; ^~ The simplified code looks like this: unsigned int cmd; [...] pcic_read_config(dev->bus, dev->devfn, PCI_COMMAND, 2, &cmd); [...] cmd |= PCI_COMMAND_IO; I.e, the code assumes that pcic_read_config() will always initialize cmd. But it's not the case. Looking at pcic_read_config(), if bus->number is != 0 or if the size is not one of 1, 2 or 4, *val will not be initialized. As a simple fix, we initialize cmd to zero at the beginning of pcibios_fixup_bus. Signed-off-by:Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arcLinus Torvalds authored
Pull ARC fixes from Vineet Gupta: - PAE40 related updates - SLC errata for region ops - intc line masking by default * tag 'arc-4.13-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: arc: Mask individual IRQ lines during core INTC init ARCv2: PAE40: set MSB even if !CONFIG_ARC_HAS_PAE40 but PAE exists in SoC ARCv2: PAE40: Explicitly set MSB counterpart of SLC region ops addresses ARC: dma: implement dma_unmap_page and sg variant ARCv2: SLC: Make sure busy bit is set properly for region ops ARC: [plat-sim] Include this platform unconditionally ARC: [plat-axs10x]: prepare dts files for enabling PAE40 on axs103 ARC: defconfig: Cleanup from old Kconfig options
-
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linuxLinus Torvalds authored
Pull RTC fix from Alexandre Belloni: "Fix regmap configuration for ds1307" * tag 'rtc-4.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: rtc: ds1307: fix regmap config
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix IGMP handling wrt VRF, from David Ahern. 2) Fix timer access to freed object in dccp, from Eric Dumazet. 3) Use kmalloc_array() in ptr_ring to avoid overflow cases which are triggerable by userspace. Also from Eric Dumazet. 4) Fix infinite loop in unmapping cleanup of nfp driver, from Colin Ian King. 5) Correct datagram peek handling of empty SKBs, from Matthew Dawson. 6) Fix use after free in TIPC, from Eric Dumazet. 7) When replacing a route in ipv6 we need to reset the round robin pointer, from Wei Wang. 8) Fix bug in pci_find_pcie_root_port() which was unearthed by the relaxed ordering changes, from Thierry Redding. I made sure to get an explicit ACK from Bjorn this time around :-) * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (27 commits) ipv6: repair fib6 tree in failure case net_sched: fix order of queue length updates in qdisc_replace() tools lib bpf: improve warning switchdev: documentation: minor typo fixes bpf, doc: also add s390x as arch to sysctl description net: sched: fix NULL pointer dereference when action calls some targets rxrpc: Fix oops when discarding a preallocated service call irda: do not leak initialized list.dev to userspace net/mlx4_core: Enable 4K UAR if SRIOV module parameter is not enabled PCI: Allow PCI express root ports to find themselves tcp: when rearming RTO, if RTO time is in past then fire RTO ASAP net: check and errout if res->fi is NULL when RTM_F_FIB_MATCH is set ipv6: reset fn->rr_ptr when replacing route sctp: fully initialize the IPv6 address in sctp_v6_to_addr() tipc: fix use-after-free tun: handle register_netdevice() failures properly datagram: When peeking datagrams with offset < 0 don't skip empty skbs bpf, doc: improve sysctl knob description netxen: fix incorrect loop counter decrement nfp: fix infinite loop on umapping cleanup ... -
Oleg Nesterov authored
This was reported many times, and this was even mentioned in commit 52ee2dfd ("pids: refactor vnr/nr_ns helpers to make them safe") but somehow nobody bothered to fix the obvious problem: task_tgid_nr_ns() is not safe because task->group_leader points to nowhere after the exiting task passes exit_notify(), rcu_read_lock() can not help. We really need to change __unhash_process() to nullify group_leader, parent, and real_parent, but this needs some cleanups. Until then we can turn task_tgid_nr_ns() into another user of __task_pid_nr_ns() and fix the problem. Reported-by:
Troy Kensinger <tkensinger@google.com> Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Heiner Kallweit authored
Current max_register setting breaks reading nvram on certain chips and also reading the standard registers on RX8130 where register map starts at 0x10. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Fixes: 11e5890b "rtc: ds1307: convert driver to regmap" Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com>
-
Wei Wang authored
In fib6_add(), it is possible that fib6_add_1() picks an intermediate node and sets the node's fn->leaf to NULL in order to add this new route. However, if fib6_add_rt2node() fails to add the new route for some reason, fn->leaf will be left as NULL and could potentially cause crash when fn->leaf is accessed in fib6_locate(). This patch makes sure fib6_repair_tree() is called to properly repair fn->leaf in the above failure case. Here is the syzkaller reported general protection fault in fib6_locate: kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Modules linked in: CPU: 0 PID: 40937 Comm: syz-executor3 Not tainted Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 task: ffff8801d7d64100 ti: ffff8801d01a0000 task.ti: ffff8801d01a0000 RIP: 0010:[<ffffffff82a3e0e1>] [<ffffffff82a3e0e1>] __ipv6_prefix_equal64_half include/net/ipv6.h:475 [inline] RIP: 0010:[<ffffffff82a3e0e1>] [<ffffffff82a3e0e1>] ipv6_prefix_equal include/net/ipv6.h:492 [inline] RIP: 0010:[<ffffffff82a3e0e1>] [<ffffffff82a3e0e1>] fib6_locate_1 net/ipv6/ip6_fib.c:1210 [inline] RIP: 0010:[<ffffffff82a3e0e1>] [<ffffffff82a3e0e1>] fib6_locate+0x281/0x3c0 net/ipv6/ip6_fib.c:1233 RSP: 0018:ffff8801d01a36a8 EFLAGS: 00010202 RAX: 0000000000000020 RBX: ffff8801bc790e00 RCX: ffffc90002983000 RDX: 0000000000001219 RSI: ffff8801d01a37a0 RDI: 0000000000000100 RBP: ffff8801d01a36f0 R08: 00000000000000ff R09: 0000000000000000 R10: 0000000000000003 R11: 0000000000000000 R12: 0000000000000001 R13: dffffc0000000000 R14: ffff8801d01a37a0 R15: 0000000000000000 FS: 00007f6afd68c700(0000) GS:ffff8801db400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000004c6340 CR3: 00000000ba41f000 CR4: 00000000001426f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Stack: ffff8801d01a37a8 ffff8801d01a3780 ffffed003a0346f5 0000000c82a23ea0 ffff8800b7bd7700 ffff8801d01a3780 ffff8800b6a1c940 ffffffff82a23ea0 ffff8801d01a3920 ffff8801d01a3748 ffffffff82a223d6 ffff8801d7d64988 Call Trace: [<ffffffff82a223d6>] ip6_route_del+0x106/0x570 net/ipv6/route.c:2109 [<ffffffff82a23f9d>] inet6_rtm_delroute+0xfd/0x100 net/ipv6/route.c:3075 [<ffffffff82621359>] rtnetlink_rcv_msg+0x549/0x7a0 net/core/rtnetlink.c:3450 [<ffffffff8274c1d1>] netlink_rcv_skb+0x141/0x370 net/netlink/af_netlink.c:2281 [<ffffffff82613ddf>] rtnetlink_rcv+0x2f/0x40 net/core/rtnetlink.c:3456 [<ffffffff8274ad38>] netlink_unicast_kernel net/netlink/af_netlink.c:1206 [inline] [<ffffffff8274ad38>] netlink_unicast+0x518/0x750 net/netlink/af_netlink.c:1232 [<ffffffff8274b83e>] netlink_sendmsg+0x8ce/0xc30 net/netlink/af_netlink.c:1778 [<ffffffff82564aff>] sock_sendmsg_nosec net/socket.c:609 [inline] [<ffffffff82564aff>] sock_sendmsg+0xcf/0x110 net/socket.c:619 [<ffffffff82564d62>] sock_write_iter+0x222/0x3a0 net/socket.c:834 [<ffffffff8178523d>] new_sync_write+0x1dd/0x2b0 fs/read_write.c:478 [<ffffffff817853f4>] __vfs_write+0xe4/0x110 fs/read_write.c:491 [<ffffffff81786c38>] vfs_write+0x178/0x4b0 fs/read_write.c:538 [<ffffffff817892a9>] SYSC_write fs/read_write.c:585 [inline] [<ffffffff817892a9>] SyS_write+0xd9/0x1b0 fs/read_write.c:577 [<ffffffff82c71e32>] entry_SYSCALL_64_fastpath+0x12/0x17 Note: there is no "Fixes" tag as this seems to be a bug introduced very early. Signed-off-by:
Wei Wang <weiwan@google.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Konstantin Khlebnikov authored
This important to call qdisc_tree_reduce_backlog() after changing queue length. Parent qdisc should deactivate class in ->qlen_notify() called from qdisc_tree_reduce_backlog() but this happens only if qdisc->q.qlen in zero. Missed class deactivations leads to crashes/warnings at picking packets from empty qdisc and corrupting state at reactivating this class in future. Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Fixes: 86a7996c ("net_sched: introduce qdisc_replace() helper") Acked-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Eric Leblond authored
Signed-off-by:
Eric Leblond <eric@regit.org> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Chris Packham authored
Two typos in switchdev.txt Signed-off-by:
Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by:
-
Daniel Borkmann authored
Looks like this was accidentally missed, so still add s390x as supported eBPF JIT arch to bpf_jit_enable. Fixes: 014cd0a3 ("bpf: Update sysctl documentation to list all supported architectures") Signed-off-by:
-
- 20 Aug, 2017 8 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
The 'move_paghes()' system call was introduced long long ago with the same permission checks as for sending a signal (except using CAP_SYS_NICE instead of CAP_SYS_KILL for the overriding capability). That turns out to not be a great choice - while the system call really only moves physical page allocations around (and you need other capabilities to do a lot of it), you can check the return value to map out some the virtual address choices and defeat ASLR of a binary that still shares your uid. So change the access checks to the more common 'ptrace_may_access()' model instead. This tightens the access checks for the uid, and also effectively changes the CAP_SYS_NICE check to CAP_SYS_PTRACE, but it's unlikely that anybody really _uses_ this legacy system call any more (we hav ebetter NUMA placement models these days), so I expect nobody to notice. Famous last words. Reported-by:
Otto Ebeling <otto.ebeling@iki.fi> Acked-by:
Eric W. Biederman <ebiederm@xmission.com> Cc: Willy Tarreau <w@1wt.eu> Cc: stable@kernel.org Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "Another pile of small fixes and updates for x86: - Plug a hole in the SMAP implementation which misses to clear AC on NMI entry - Fix the norandmaps/ADDR_NO_RANDOMIZE logic so the command line parameter works correctly again - Use the proper accessor in the startup64 code for next_early_pgt to prevent accessing of invalid addresses and faulting in the early boot code. - Prevent CPU hotplug lock recursion in the MTRR code - Unbreak CPU0 hotplugging - Rename overly long CPUID bits which got introduced in this cycle - Two commits which mark data 'const' and restrict the scope of data and functions to file scope by making them 'static'" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Constify attribute_group structures x86/boot/64/clang: Use fixup_pointer() to access 'next_early_pgt' x86/elf: Remove the unnecessary ADDR_NO_RANDOMIZE checks x86: Fix norandmaps/ADDR_NO_RANDOMIZE x86/mtrr: Prevent CPU hotplug lock recursion x86: Mark various structures and functions as 'static' x86/cpufeature, kvm/svm: Rename (shorten) the new "virtualized VMSAVE/VMLOAD" CPUID flag x86/smpboot: Unbreak CPU0 hotplug x86/asm/64: Clear AC on NMI entries -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fixes from Thomas Gleixner: "A few small fixes for timer drivers: - Prevent infinite recursion in the arm architected timer driver with ftrace - Propagate error codes to the caller in case of failure in EM STI driver - Adjust a bogus loop iteration in the arm architected timer driver - Add a missing Kconfig dependency to the pistachio clocksource to prevent build failures - Correctly check for IS_ERR() instead of NULL in the shared timer-of code" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/arm_arch_timer: Avoid infinite recursion when ftrace is enabled clocksource/drivers/Kconfig: Fix CLKSRC_PISTACHIO dependencies clocksource/drivers/timer-of: Checking for IS_ERR() instead of NULL clocksource/drivers/em_sti: Fix error return codes in em_sti_probe() clocksource/drivers/arm_arch_timer: Fix mem frame loop initialization -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Thomas Gleixner: "Two fixes for the perf subsystem: - Fix an inconsistency of RDPMC mm struct tagging across exec() which causes RDPMC to fault. - Correct the timestamp mechanics across IOC_DISABLE/ENABLE which causes incorrect timestamps and total time calculations" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Fix time on IOC_ENABLE perf/x86: Fix RDPMC vs. mm_struct tracking -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Thomas Gleixner: "A pile of smallish changes all over the place: - Add a missing ISB in the GIC V1 driver - Remove an ACPI version check in the GIC V3 ITS driver - Add the missing irq_pm_shutdown function for BRCMSTB-L2 to avoid spurious wakeups - Remove the artifical limitation of ITS instances to the number of NUMA nodes which prevents utilizing the ITS hardware correctly - Prevent a infinite parsing loop in the GIC-V3 ITS/MSI code - Honour the force affinity argument in the GIC-V3 driver which is required to make perf work correctly - Correctly report allocation failures in GIC-V2/V3 to avoid using half allocated and initialized interrupts. - Fixup checks against nr_cpu_ids in the generic IPI code" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/ipi: Fixup checks against nr_cpu_ids genirq: Restore trigger settings in irq_modify_status() MAINTAINERS: Remove Jason Cooper's irqchip git tree irqchip/gic-v3-its-platform-msi: Fix msi-parent parsing loop irqchip/gic-v3-its: Allow GIC ITS number more than MAX_NUMNODES irqchip: brcmstb-l2: Define an irq_pm_shutdown function irqchip/gic: Ensure we have an ISB between ack and ->handle_irq irqchip/gic-v3-its: Remove ACPICA version check for ACPI NUMA irqchip/gic-v3: Honor forced affinity setting irqchip/gic-v3: Report failures in gic_irq_domain_alloc irqchip/gic-v2: Report failures in gic_irq_domain_alloc irqchip/atmel-aic: Remove root argument from ->fixup() prototype irqchip/atmel-aic: Fix unbalanced refcount in aic_common_rtc_irq_fixup() irqchip/atmel-aic: Fix unbalanced of_node_put() in aic_common_irq_fixup() -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull watchdog fix from Thomas Gleixner: "A fix for the hardlockup watchdog to prevent false positives with extreme Turbo-Modes which make the perf/NMI watchdog fire faster than the hrtimer which is used to verify. Slightly larger than the minimal fix, which just would increase the hrtimer frequency, but comes with extra overhead of more watchdog timer interrupts and thread wakeups for all users. With this change we restrict the overhead to the extreme Turbo-Mode systems" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: kernel/watchdog: Prevent false positives with turbo modes
-
Alexey Dobriyan authored
Valid CPU ids are [0, nr_cpu_ids-1] inclusive. Fixes: 3b8e29a8 ("genirq: Implement ipi_send_mask/single()") Fixes: f9bce791 ("genirq: Add a new function to get IPI reverse mapping") Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20170819095751.GB27864@avx2
-
- 18 Aug, 2017 2 commits
-
-
Xin Long authored
As we know in some target's checkentry it may dereference par.entryinfo to check entry stuff inside. But when sched action calls xt_check_target, par.entryinfo is set with NULL. It would cause kernel panic when calling some targets. It can be reproduce with: # tc qd add dev eth1 ingress handle ffff: # tc filter add dev eth1 parent ffff: u32 match u32 0 0 action xt \ -j ECN --ecn-tcp-remove It could also crash kernel when using target CLUSTERIP or TPROXY. By now there's no proper value for par.entryinfo in ipt_init_target, but it can not be set with NULL. This patch is to void all these panics by setting it with an ipt_entry obj with all members = 0. Note that this issue has been there since the very beginning. Signed-off-by:Xin Long <lucien.xin@gmail.com> Acked-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
David Howells authored
rxrpc_service_prealloc_one() doesn't set the socket pointer on any new call it preallocates, but does add it to the rxrpc net namespace call list. This, however, causes rxrpc_put_call() to oops when the call is discarded when the socket is closed. rxrpc_put_call() needs the socket to be able to reach the namespace so that it can use a lock held therein. Fix this by setting a call's socket pointer immediately before discarding it. This can be triggered by unloading the kafs module, resulting in an oops like the following: BUG: unable to handle kernel NULL pointer dereference at 0000000000000030 IP: rxrpc_put_call+0x1e2/0x32d PGD 0 P4D 0 Oops: 0000 [#1] SMP Modules linked in: kafs(E-) CPU: 3 PID: 3037 Comm: rmmod Tainted: G E 4.12.0-fscache+ #213 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 task: ffff8803fc92e2c0 task.stack: ffff8803fef74000 RIP: 0010:rxrpc_put_call+0x1e2/0x32d RSP: 0018:ffff8803fef77e08 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff8803fab99ac0 RCX: 000000000000000f RDX: ffffffff81c50a40 RSI: 000000000000000c RDI: ffff8803fc92ea88 RBP: ffff8803fef77e30 R08: ffff8803fc87b941 R09: ffffffff82946d20 R10: ffff8803fef77d10 R11: 00000000000076fc R12: 0000000000000005 R13: ffff8803fab99c20 R14: 0000000000000001 R15: ffffffff816c6aee FS: 00007f915a059700(0000) GS:ffff88041fb80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000030 CR3: 00000003fef39000 CR4: 00000000001406e0 Call Trace: rxrpc_discard_prealloc+0x325/0x341 rxrpc_listen+0xf9/0x146 kernel_listen+0xb/0xd afs_close_socket+0x3e/0x173 [kafs] afs_exit+0x1f/0x57 [kafs] SyS_delete_module+0x10f/0x19a do_syscall_64+0x8a/0x149 entry_SYSCALL64_slow_path+0x25/0x25 Fixes: 2baec2c3 ("rxrpc: Support network namespacing") Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
