- 19 May, 2010 40 commits
-
-
Dean Anderson authored
usb_set_intfdata should not be used when using v4l2_device_register and a non-NULL argument for the device. Signed-off-by:
Dean Anderson <linux-dev@sensoray.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Joe Perches authored
There is a macro called dev_info that prints struct device specific information. Having variables with the same name can be confusing and prevents conversion of the macro to a function. Rename the existing dev_info variables to something else in preparation to converting the dev_info macro to a function. Signed-off-by:
Joe Perches <joe@perches.com> Acked-by:
Mike Isely <isely@pobox.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
Instead of removing an entry, the logic were doing both a deletion and a key addition, as shown by the log: [11517.323314] ir_getkeycode: unknown key for scancode 0x0050 [11517.326529] ir_do_setkeycode: #80: Deleting scan 0x0050 [11517.326529] ir_do_setkeycode: #80: New scan 0x0050 with key 0x0000 [11517.340598] ir_getkeycode: unknown key for scancode 0x0051 [11517.343811] ir_do_setkeycode: #81: Deleting scan 0x0051 [11517.343811] ir_do_setkeycode: #81: New scan 0x0051 with key 0x0000 [11517.357889] ir_getkeycode: unknown key for scancode 0x0052 [11517.361104] ir_do_setkeycode: #82: Deleting scan 0x0052 [11517.361104] ir_do_setkeycode: #82: New scan 0x0052 with key 0x0000 [11517.375453] ir_getkeycode: unknown key for scancode 0x0053 [11517.378474] ir_do_setkeycode: #83: Deleting scan 0x0053 [11517.378474] ir_do_setkeycode: #83: New scan 0x0053 with key 0x0000 Signed-off-by: -
Mauro Carvalho Chehab authored
There's no need to use quotation marks at the uevent names for the driver and table. Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
As Adreas pointed, RC6 should use CONFIG_IR_RC6_DECODER_MODULE, instead of the RC5 config option. Thanks-to: Andreas Oberitter <obi@linuxtv.org> Acked-by:
David Härdeman <david@hardeman.nu> Signed-off-by:
-
Mauro Carvalho Chehab authored
Add a missing semicolon to fix this error: In file included from drivers/staging/tm6000/tm6000-cards.c:32: drivers/staging/tm6000/tm6000.h:123: error: two or more data types in declaration specifiers Signed-off-by: -
Jean-François Moine authored
Signed-off-by:
Jean-François Moine <moinejf@free.fr> Signed-off-by:
-
Jean-François Moine authored
Signed-off-by:
-
Jean-François Moine authored
Signed-off-by:
-
Jean-François Moine authored
Signed-off-by:
-
Bee Hock Goh authored
The driver was doing malloc when buf is null causing memory corruption. The analog part is still pretty much broken but at least fixing this will stop it from crashing the machine when streamon. Signed-off-by:
Bee Hock Goh <beehock@gmail.com> Signed-off-by:
-
HIRANO Takahito authored
Support Earthsoft PT2. Signed-off-by:
HIRANO Takahito <hiranotaka@zng.info> Signed-off-by:
-
Stefan Ringel authored
request labeling board version check Signed-off-by:
Stefan Ringel <stefan.ringel@arcor.de> Signed-off-by:
-
Stefan Ringel authored
labeling the request after tuner reading and writeing Signed-off-by:
-
Dan Carpenter authored
Return -EINVAL if we don't find the right query control id. Signed-off-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
-
Dan Carpenter authored
Return -EINVAL if we don't find the control id. Signed-off-by:
-
Randy Dunlap authored
Handle case of GSPCA=m, INPUT=m when building gspca core; also handle case of INPUT=n by using stubs. drivers/media/video/gspca/gspca.c:662: error: implicit declaration of function 'gspca_input_destroy_urb' drivers/media/video/gspca/gspca.c:668: error: implicit declaration of function 'gspca_input_create_urb' drivers/media/video/gspca/gspca.c:2284: error: implicit declaration of function 'gspca_input_connect' Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Dmitri Belimov authored
The hybrid tuner FMD1216MEX_MK3 after cold start has disabled IF. This tuner has internal I2C switch. This switch switch I2C bus between DVB-T and IF part. Default state is DVB-T. When module saa7134 is load it can't find IF tda9887 and disable analog TV mode. Sets internal I2C switch of the tuner to IF by send special value to the tuner as for receive analog TV from low band. It can be usefule for other cards. I didn't set configure a tuner by a tuner model because this tuner can have different I2C address. May be we can do it later after discuss for more robust support a tuners. Signed-off-by:
Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by:
-
Stefan Ringel authored
Signed-off-by:
-
Stefan Ringel authored
Signed-off-by:
-
Stefan Ringel authored
switch to a gpio structure Signed-off-by:
-
Dan Carpenter authored
Return an error if the controller is not found. Signed-off-by:
-
Dan Carpenter authored
The original code doesn't handle the situation where the controller is not found. Signed-off-by:
-
Dan Carpenter authored
Return an error if the controller is not found. Signed-off-by:
-
Dan Carpenter authored
"dev" is never NULL here so there is no need to check. Signed-off-by:
-
Dean Anderson authored
adding v4l2_device structure. if one video_register_device call fails, allows use of other devices or channels. Signed-off-by:
Dean Anderson <dean@sensoray.com> Signed-off-by:
-
Dean Anderson authored
Signed-off-by:
-
Dean Anderson authored
big kernel lock removed from open function. v4l2 code does not require locking the open function except to check asynchronous firmware load state, which is protected by a mutex Signed-off-by:
-
Dean Anderson authored
call to video_device_alloc was not being checked in probe function. code simplified and uses video_device inside device structure. Signed-off-by:
-
Dean Anderson authored
removal of unused pipe array (of size one). Signed-off-by:
-
Dean Anderson authored
simplifies use of kref in driver Signed-off-by:
-
Dan Carpenter authored
The "AUVI_INPUT(tmp)" macro uses "tmp" as an index of an array with AU0828_MAX_INPUT elements. Signed-off-by:
-
istvan_v@mailbox.hu authored
The following patch fixes code that checks for CX88_VMUX_TELEVISION, but not CX88_VMUX_CABLE. This prevented for example the audio standard from being set when using the cable input. Signed-off-by:
Istvan Varga <istvanv@users.sourceforge.net> Signed-off-by:
-
Christoph Fritz authored
makes USB_PWC_INPUT_EVDEV to depend also on USB_PWC Signed-off-by:
Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by:
-
Bjørn Mork authored
Never call dvb_frontend_detach if we failed to attach a frontend. This fixes the following oops: [ 8.172997] DVB: registering new adapter (TT-Budget S2-1600 PCI) [ 8.209018] adapter has MAC addr = 00:d0:5c:cc:a7:29 [ 8.328665] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 8.328753] Intel ICH 0000:00:1f.5: setting latency timer to 64 [ 8.562047] DVB: Unable to find symbol stv090x_attach() [ 8.562117] BUG: unable to handle kernel NULL pointer dereference at 000000ac [ 8.562239] IP: [<e08b04a3>] dvb_frontend_detach+0x4/0x67 [dvb_core] Ref http://bugs.debian.org/575207 Also clean up if we are unable to register the tuner and LNB drivers [mchehab@redhat.com: add printk log level, to calm down chechpatch.pl] Signed-off-by:
Bjørn Mork <bjorn@mork.no> Reported-by:
Fladischer Michael <FladischerMichael@fladi.at> Acked-by:
Oliver Endriss <o.endriss@gmx.de> Signed-off-by:
-
David Härdeman authored
This patch adds an RC6 decoder (modes 0 and 6A) to ir-core. Signed-off-by:
-
David Härdeman authored
This patch adds NECx support to drivers/media/IR/ir-nec-decoder.c Signed-off-by:
-
David Härdeman authored
This patch adds RC5x support to drivers/media/IR/ir-rc5-decoder.c Signed-off-by:
-
Nicolas Noirbent authored
Fix a divide-by-zero error in ds3000's ds3000_read_snr(), when getting a very low signal reading (dvbs2_signal_reading >= 1). This prevents some nasty EIPs when running szap-s2 with a very low signal strength. Signed-off-by:
Nicolas Noirbent <nicolas.noirbent@smartjog.com> Signed-off-by:
-
