Driver changes the link properties via communication with
the management firmware, and re-reads the resulting link status
when it receives an indication that the link has changed.
However, there are certain scenarios where such indications
might be missing, and so driver also re-reads the current link
results without attention in several places. Specifically, it
does so during load and when resetting the link.

This creates a race where driver might reflect incorrect
link status - e.g., when explicit reading of the link status is
switched by attention with the changed configuration.

Correct this flow by a lock syncronizing the handling of the
link indications [both explicit requests and attention].
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Flows accessing registers require the flow to hold a PTT entry.
To protect 'major' load/unload flows a main_ptt is pre-allocated
to guarantee such flows wouldn't be blocked by PTT being
unavailable.

Status block initialization currently uses the main_ptt which
is incorrect, as this flow might run concurrently to others
[E.g., loading qedr while toggling qede]. That would have dire
effects as it means registers' access to device breaks and further
read/writes might access incorrect addresses.

Instead, when initializing status blocks acquire/release a PTT
as part of the flow.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Driver currently utilizes the same loop variable in two
nested loops.
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

VF learns of the current link state via its bulletin board,
which might reflect either the physical link state or some
user-configured logical state.
Whenever the physical link changes or whnever such a configuration
is explicitly made by user the PF driver would update the bulletin
that the VF reads. But if neither has happened - i.e., PF still
hasn't got a physical link up and no additional configuration was
done the VF wouldn't have a valid link information available.

Simply reflect the physical link state whenever the VF is
initialized. The user could then affect it however he wants.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qed needs to be informed of the removal of the qede interface
prior to its actual removal, as qede has some registered callbacks
that might get called async to the removal flow.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Need to make sure the slowpath workqueue and the qede lock
are ready for the registration of the netdevice, as once
registered there's no guarantee those wouldn't be used.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Reserving doorbell BAR space according to the currently active CPUs
may result in a bug if disabled CPUs are later enabled but no
doorbell space was reserved for them.
Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If QP is in reset state then there are no resources to free so avoid
freeing any.
Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently the state is read only after the buffers are relesed.
Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The CQ resource pool is protected by a spin lock. When a CQ creation
fails it now deallocates under that lock as well.
Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pavel Belous says:

====================
net: ethernet: aquantia: improvements and fixes

The following patchset contains improvements and fixes for aQuantia
AQtion ethernet driver from net-next tree.

Most fixes are based on the comments from Lino Sanfilippo.

Sanity testing was performed on real HW. No regression found.

v1->v2: 1)Removed buffers copying.
	2)Fixed dma error handling.

v2->v3: 1)Fixes for aq_ndev_change_mtu:
	-Use core MTU checking for min_mtu.
	-Removed extra new_mtu assigment.
	2)Reverse XMAS tree in aq_ring_rx_fill.
v3->v4: 1)Use ndev->reg_state instead "is_ndev_registered" flag.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This fix removes copying of tx biffers.
Now we use ring->buff_fing directly.
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We should allocate the number of pages based on the config parameter
AQ_CFG_RX_FRAME_MAX.
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

rxd_wb->pkt_len is the total length of the packet.
If we received a large packet (with length > AQ_CFG_RX_FRAME_MAX) then we
will get multiple buffers. We need to fix the length of the last buffer.
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

netdev_register should be called when everything is initialized.
Also we should use net_device->reg_state field instead own
"is_ndev_registered" flag to avoid any race.
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We should check for a null pointer for aq_nic_ndev_alloc
instead netdev_priv.
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Reviewed-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use NETDEV_TX_OK as the return value for successful transmission.
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Reviewed-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

rtnl_unlock should be called if error occurred.
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Reviewed-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixed superfluous initialization of err.
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Reviewed-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove boilerplate code by using macro module_pci_driver.
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Reviewed-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

1)Removed unnecessary comparsion "old_mtu == new_mtu".
This check is not needed. Function aq_ndev_change_mtu wont be called
if mtu has not changed.

2)Removed extra assignment ndev->mtu = new_mtu;
This assignment already done inside __dev_set_mtu().

3)Use core MTU checking for min_mtu.
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

 busy_count field and is_busy flag is not needed at all.
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Reviewed-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

This assignment is not needed.
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Reviewed-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.

As I don't have the hardware, I'd be very pleased if
someone may test this patch.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.

As I don't have the hardware, I'd be very pleased if
someone may test this patch.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
nfp: expose more firmware and hw debug info

This series is mostly a result of flash firmware team requesting
access to some of the information and data necessary for debugging
firmware problems.  Patch 1 adds a missing error message.  Patch 2
prints manufacturing info to logs in case PCI VPD capability is
not programmed correctly.  Patches 3 and 4 allow reporting NSP ABI
version in ethtool -i.  Patch 5 allows dumping flash application
logs.

Patches 6 and 7 provides a way of application firmwares to declare
limited SR-IOV support.

v2: put some of the code in patch 7 in #ifdef CONFIG_PCI_SRIOV (Yuval).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Some application firmware projects may choose to limit the number
of VFs available below what is specified in PCI capability to be
able to reuse the PCIe interface resources.  There may also be
projects which use cases don't require SR-IOV support at all and
therefore don't want to spend time implementing/testing it.

Check nfd_vf_cfg_max_vfs firmware symbol to see if application
firmware is reporting how many VFs it supports.  This mechanism
is an opt-in, if symbol is not present we will only look at the
PCI capability values.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfp_rtsym_read_le() has an out parameter for error codes.
We have to use that instead of returning errors directly.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Allow dumping "arm.diag" resource with ethtool -w.  This resource
should contain a text log of the NSP (control processor) application.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ethtool_drvinfo->fw_version can cantain multiple FW strings.
We already report NFD ABI version there, add NSP ABI version
if available (i.e. on PF) with 'sp:' prefix.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We read the status register on each NSP open, we can store the NSP
ABI version in the state structure so that we don't have to read
it again.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Report card manufacturing information when driver loads.  These
identify the version of the board and its subcomponents.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When acquiring NSP communication resource fails user is left with
"probe failed with error -2" PCI code message but no info on what
caused the problem.  Some development boards may not have NSP FW
in the flash image.  Help users with a more verbouse message.

While at it move the whole NSP init to a separate function to keep
.probe() callback nice and simple.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next

Johan Hedberg says:

====================
pull request: bluetooth-next 2017-02-19

Here's a set of Bluetooth patches for the 4.11 kernel:

 - New USB IDs to the btusb driver
 - Race fix in btmrvl driver
 - Added out-of-band wakeup support to the btusb driver
 - NULL dereference fix to bt_sock_recvmsg

Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add netconf support to MPLS. Allows userpsace to learn and be notified
of changes to 'input' enable setting per interface.
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Acked-by: Robert Shearman <rshearma@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If 'dma_alloc_coherent()' fails, we should release resources allocated so
far, just as done in all other cases in this function.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

if 'devm_kzalloc()' fails, we should release resources allocated so far,
just as done a few lines below.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since mlx4 NIC are used on PowerPC with 64K pages, we need to adapt
MLX4_EN_ALLOC_PREFER_ORDER definition.

Otherwise, a fragment sitting in an out of order TCP queue can hold
0.5 Mbytes and it is a serious OOM risk.

Fixes: 51151a16 ("mlx4: allow order-0 memory allocations in RX path")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
40GbE Intel Wired LAN Driver Updates 2017-02-18

This series contains updates to i40e and i40evf only.

Alan fixes a bug in which the driver is unable to exit overflow
promiscuous mode after having added "too many" mac filters.  Ractored
the '%*ph' printk format specifier to instead use the print_hex_dump().

Josh adds enabling multicast magic packet wakeup by adding calls to
the mac_address_write admin q function during power down to update the
PRTPM_SAH/SAL registers with the MC_MAG_EN bit.

Jake remove a duplicate call i40e_update_link_info(), since it does not
need to call it twice.  Fixes and issue where we calculating the wrong
switch id on big endian platforms.  Avoided sparse warning, by doing a
typecast to ensure the value is of the type expected by
csum_replace_by_diff().

Mitch fixes a memory leak by freeing resources during i40e_remove().
Cleans up some code confusion by adding a proper code comment.

Carolyn fixes a bug introduced with the addition of the per queue ITR
feature support in ethtool.  Cleans up a duplicate device id from the
PCI table.

Harshitha fixes a bug which causes the 'Link Detected' field in
ethtool to report the correct link status.

Benjamin Poirier from SuSE applies a fix ec13ee80 ("virtio_net:
 invoke softirqs after __napi_schedule") to i40e driver as well.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Resizing currently drops consumer lock.  This can cause entries to be
reordered, which isn't good in itself.  More importantly, consumer can
detect a false ring empty condition and block forever.

Further, nesting of consumer within producer lock is problematic for
tun, since it produces entries in a BH, which causes a lock order
reversal:

       CPU0                    CPU1
       ----                    ----
  consume:
  lock(&(&r->consumer_lock)->rlock);
                               resize:
                               local_irq_disable();
                               lock(&(&r->producer_lock)->rlock);
                               lock(&(&r->consumer_lock)->rlock);
  <Interrupt>
  produce:
  lock(&(&r->producer_lock)->rlock);

To fix, nest producer lock within consumer lock during resize,
and keep consumer lock during the whole swap operation.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: stable@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>