- 12 Feb, 2024 2 commits
-
-
Eric Dumazet authored
tp->tcp_usec_ts is a read mostly field, used in rx and tx fast paths. Fixes: d5fed5ad ("tcp: reorganize tcp_sock fast path variables") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Coco Li <lixiaoyan@google.com> Cc: Wei Wang <weiwan@google.com> Reviewed-by:
Simon Horman <horms@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
tp->scaling_ratio is a read mostly field, used in rx and tx fast paths. Fixes: d5fed5ad ("tcp: reorganize tcp_sock fast path variables") Signed-off-by:
-
- 10 Feb, 2024 8 commits
-
-
David S. Miller authored
Jakub Kicinski says: ==================== net: tls: fix some issues with async encryption valis was reporting a race on socket close so I sat down to try to fix it. I used Sabrina's async crypto debug patch to test... and in the process run into some of the same issues, and created very similar fixes :( I didn't realize how many of those patches weren't applied. Once I found Sabrina's code [1] it turned out to be so similar in fact that I added her S-o-b's and Co-develop'eds in a semi-haphazard way. With this series in place all expected tests pass with async crypto. Sabrina had a few more fixes, but I'll leave those to her, things are not crashing anymore. [1] https://lore.kernel.org/netdev/cover.1694018970.git.sd@queasysnail.net/ ==================== Signed-off-by:
-
Jakub Kicinski authored
We double count async, non-zc rx data. The previous fix was lucky because if we fully zc async_copy_bytes is 0 so we add 0. Decrypted already has all the bytes we handled, in all cases. We don't have to adjust anything, delete the erroneous line. Fixes: 4d42cd6b ("tls: rx: fix return value for async crypto") Co-developed-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Reviewed-by:
-
Jakub Kicinski authored
This exact case was fail for async crypto and we weren't catching it. Signed-off-by:
-
Sabrina Dubroca authored
tls_decrypt_sg doesn't take a reference on the pages from clear_skb, so the put_page() in tls_decrypt_done releases them, and we trigger a use-after-free in process_rx_list when we try to read from the partially-read skb. Fixes: fd31f399 ("tls: rx: decrypt into a fresh skb") Signed-off-by:
-
Jakub Kicinski authored
Since we're setting the CRYPTO_TFM_REQ_MAY_BACKLOG flag on our requests to the crypto API, crypto_aead_{encrypt,decrypt} can return -EBUSY instead of -EINPROGRESS in valid situations. For example, when the cryptd queue for AESNI is full (easy to trigger with an artificially low cryptd.cryptd_max_cpu_qlen), requests will be enqueued to the backlog but still processed. In that case, the async callback will also be called twice: first with err == -EINPROGRESS, which it seems we can just ignore, then with err == 0. Compared to Sabrina's original patch this version uses the new tls_*crypt_async_wait() helpers and converts the EBUSY to EINPROGRESS to avoid having to modify all the error handling paths. The handling is identical. Fixes: a54667f6 ("tls: Add support for encryption using async offload accelerator") Fixes: 94524d8f ("net/tls: Add support for async decryption of tls records") Co-developed-by: -
Jakub Kicinski authored
Similarly to previous commit, the submitting thread (recvmsg/sendmsg) may exit as soon as the async crypto handler calls complete(). Reorder scheduling the work before calling complete(). This seems more logical in the first place, as it's the inverse order of what the submitting thread will do. Reported-by:
valis <sec@valis.email> Fixes: a42055e8 ("net/tls: Add support for async encryption of records for performance") Signed-off-by:
-
Jakub Kicinski authored
The submitting thread (one which called recvmsg/sendmsg) may exit as soon as the async crypto handler calls complete() so any code past that point risks touching already freed data. Try to avoid the locking and extra flags altogether. Have the main thread hold an extra reference, this way we can depend solely on the atomic ref counter for synchronization. Don't futz with reiniting the completion, either, we are now tightly controlling when completion fires. Reported-by:
-
Jakub Kicinski authored
Factor out waiting for async encrypt and decrypt to finish. There are already multiple copies and a subsequent fix will need more. No functional changes. Note that crypto_wait_req() returns wait->err Signed-off-by:
-
- 09 Feb, 2024 27 commits
-
-
Jakub Kicinski authored
Breno Leitao says: ==================== net: Fix MODULE_DESCRIPTION() for net (p5) There are hundreds of network modules that misses MODULE_DESCRIPTION(), causing a warning when compiling with W=1. Example: WARNING: modpost: missing MODULE_DESCRIPTION() in net/sched/em_cmp.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/sched/em_nbyte.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/sched/em_u32.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/sched/em_meta.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/sched/em_text.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/sched/em_canid.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv4/ip_tunnel.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv4/ipip.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv4/ip_gre.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv4/udp_tunnel.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv4/ip_vti.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv4/ah4.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv4/esp4.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv4/xfrm4_tunnel.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv4/tunnel4.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/xfrm/xfrm_algo.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/xfrm/xfrm_user.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv6/ah6.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv6/esp6.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv6/xfrm6_tunnel.o WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv6/tunnel6.o This part5 of the patchset focus on the missing net/ module, which are now warning free. v1: https://lore.kernel.org/all/20240205101400.1480521-1-leitao@debian.org/ v2: https://lore.kernel.org/all/20240207101929.484681-1-leitao@debian.org/ ==================== Link: https://lore.kernel.org/r/20240208164244.3818498-1-leitao@debian.orgSigned-off-by:
-
Breno Leitao authored
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the DSA loopback fixed PHY module. Suggested-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Breno Leitao <leitao@debian.org> Acked-by:
-
Breno Leitao authored
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the IP-VLAN based tap driver. Signed-off-by:
-
Breno Leitao authored
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the network schedulers. Suggested-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
Breno Leitao authored
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the IPv4 modules. Signed-off-by:
-
Breno Leitao authored
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the IPv6 modules. Signed-off-by:
-
Breno Leitao authored
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to IPv6 over Low power Wireless Personal Area Network. Signed-off-by:
Alexander Aring <aahringo@redhat.com> Reviewed-by:
-
Breno Leitao authored
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the PF_KEY socket helpers. Signed-off-by:
-
Breno Leitao authored
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the Multi-Protocol Over ATM (MPOA) driver. Signed-off-by:
-
Breno Leitao authored
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the XFRM interface drivers. Signed-off-by:
-
Horatiu Vultur authored
There is a crash when adding one of the lan966x interfaces under a lag interface. The issue can be reproduced like this: ip link add name bond0 type bond miimon 100 mode balance-xor ip link set dev eth0 master bond0 The reason is because when adding a interface under the lag it would go through all the ports and try to figure out which other ports are under that lag interface. And the issue is that lan966x can have ports that are NULL pointer as they are not probed. So then iterating over these ports it would just crash as they are NULL pointers. The fix consists in actually checking for NULL pointers before accessing something from the ports. Like we do in other places. Fixes: cabc9d49 ("net: lan966x: Add lag support for lan966x") Signed-off-by:
Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by:
Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by:
-
Victor Nogueira authored
While testing tdc with parallel tests for mirred to block we caught an intermittent bug. The blockid was being zeroed out when a net device was deleted and, thus, giving us an incorrect blockid value whenever we tried to dump the mirred action. Since we don't increment the block refcount in the control path (and only use the ID), we don't need to zero the blockid field whenever a net device is going down. Fixes: 42f39036 ("net/sched: act_mirred: Allow mirred to block") Signed-off-by:
Victor Nogueira <victor@mojatatu.com> Reviewed-by:
-
Jakub Kicinski authored
Aaron Conole says: ==================== net: openvswitch: limit the recursions from action sets Open vSwitch module accepts actions as a list from the netlink socket and then creates a copy which it uses in the action set processing. During processing of the action list on a packet, the module keeps a count of the execution depth and exits processing if the action depth goes too high. However, during netlink processing the recursion depth isn't checked anywhere, and the copy trusts that kernel has large enough stack to accommodate it. The OVS sample action was the original action which could perform this kinds of recursion, and it originally checked that it didn't exceed the sample depth limit. However, when sample became optimized to provide the clone() semantics, the recursion limit was dropped. This series adds a depth limit during the __ovs_nla_copy_actions() call that will ensure we don't exceed the max that the OVS userspace could generate for a clone(). Additionally, this series provides a selftest in 2/2 that can be used to determine if the OVS module is allowing unbounded access. It can be safely omitted where the ovs selftest framework isn't available. ==================== Link: https://lore.kernel.org/r/20240207132416.1488485-1-aconole@redhat.comSigned-off-by:
-
Aaron Conole authored
Add a test case into the netlink checks that will show the number of nested action recursions won't exceed 16. Going to 17 on a small clone call isn't enough to exhaust the stack on (most) systems, so it should be safe to run even on systems that don't have the fix applied. Signed-off-by:
Aaron Conole <aconole@redhat.com> Reviewed-by:
-
Aaron Conole authored
The ovs module allows for some actions to recursively contain an action list for complex scenarios, such as sampling, checking lengths, etc. When these actions are copied into the internal flow table, they are evaluated to validate that such actions make sense, and these calls happen recursively. The ovs-vswitchd userspace won't emit more than 16 recursion levels deep. However, the module has no such limit and will happily accept limits larger than 16 levels nested. Prevent this by tracking the number of recursions happening and manually limiting it to 16 levels nested. The initial implementation of the sample action would track this depth and prevent more than 3 levels of recursion, but this was removed to support the clone use case, rather than limited at the current userspace limit. Fixes: 798c1661 ("openvswitch: Optimize sample action for the clone use cases") Signed-off-by:
-
Jakub Kicinski authored
Ido Schimmel says: ==================== selftests: forwarding: Various fixes Fix various problems in the forwarding selftests so that they will pass in the netdev CI instead of being ignored. See commit messages for details. ==================== Link: https://lore.kernel.org/r/20240208155529.1199729-1-idosch@nvidia.comSigned-off-by:
-
Ido Schimmel authored
The redirection test case fails in the netdev CI on debug kernels because an FDB entry is learned despite the presence of a tc filter that redirects incoming traffic [1]. I am unable to reproduce the failure locally, but I can see how it can happen given that learning is first enabled and only then the ingress tc filter is configured. On debug kernels the time window between these two operations is longer compared to regular kernels, allowing random packets to be transmitted and trigger learning. Fix by reversing the order and configure the ingress tc filter before enabling learning. [1] [...] # TEST: Locked port MAB redirect [FAIL] # Locked entry created for redirected traffic Fixes: 38c43a1c ("selftests: forwarding: Add test case for traffic redirection from a locked port") Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Reviewed-by:
Hangbin Liu <liuhangbin@gmail.com> Acked-by:
Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20240208155529.1199729-5-idosch@nvidia.comSigned-off-by:
-
Ido Schimmel authored
Suppress the following grep warnings: [...] INFO: # Port group entries configuration tests - (*, G) TEST: Common port group entries configuration tests (IPv4 (*, G)) [ OK ] TEST: Common port group entries configuration tests (IPv6 (*, G)) [ OK ] grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / TEST: IPv4 (*, G) port group entries configuration tests [ OK ] grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / TEST: IPv6 (*, G) port group entries configuration tests [ OK ] [...] They do not fail the test, but do clutter the output. Fixes: b6d00da0 ("selftests: forwarding: Add bridge MDB test") Signed-off-by:
-
Ido Schimmel authored
After enabling a multicast querier on the bridge (like the test is doing), the bridge will wait for the Max Response Delay before starting to forward according to its MDB in order to let Membership Reports enough time to be received and processed. Currently, the test is waiting for exactly the default Max Response Delay (10 seconds) which is racy and leads to failures [1]. Fix by reducing the Max Response Delay to 1 second. [1] [...] # TEST: IPv4 host entries forwarding tests [FAIL] # Packet locally received after flood Fixes: b6d00da0 ("selftests: forwarding: Add bridge MDB test") Signed-off-by:
-
Ido Schimmel authored
After enabling a multicast querier on the bridge (like the test is doing), the bridge will wait for the Max Response Delay before starting to forward according to its MDB in order to let Membership Reports enough time to be received and processed. Currently, the test is waiting for exactly the default Max Response Delay (10 seconds) which is racy and leads to failures [1]. Fix by reducing the Max Response Delay to 1 second. [1] [...] # TEST: L2 miss - Multicast (IPv4) [FAIL] # Unregistered multicast filter was hit after adding MDB entry Fixes: 8c33266a ("selftests: forwarding: Add layer 2 miss test cases") Signed-off-by:
-
Ido Schimmel authored
The test toggles the carrier of a bridge port in order to test the bridge backup port feature. Due to the linkwatch delayed work the carrier change is not always reflected fast enough to the bridge driver and packets are not forwarded as the test expects, resulting in failures [1]. Fix by busy waiting on the bridge port state until it changes to the desired state following the carrier change. [1] # Backup port # ----------- [...] # TEST: swp1 carrier off [ OK ] # TEST: No forwarding out of swp1 [FAIL] [ 641.995910] br0: port 1(swp1) entered disabled state # TEST: No forwarding out of vx0 [ OK ] Fixes: b4084530 ("selftests: net: Add bridge backup port and backup nexthop ID test") Signed-off-by:
Petr Machata <petrm@nvidia.com> Acked-by:
Paolo Abeni <pabeni@redhat.com> Acked-by:
-
Paolo Abeni authored
The reuseport_addr_any.sh is currently skipping DCCP tests and pmtu.sh is skipping all the FOU/GUE related cases: add the missing options. Signed-off-by:
-
Parav Pandit authored
Command example string is not read as command. Fix command annotation. Fixes: a8ce7b26 ("devlink: Expose port function commands to control migratable") Signed-off-by:
Parav Pandit <parav@nvidia.com> Reviewed-by:
Jiri Pirko <jiri@nvidia.com> Reviewed-by:
-
Magnus Karlsson authored
Do not report the XDP capability NETDEV_XDP_ACT_XSK_ZEROCOPY as the bonding driver does not support XDP and AF_XDP in zero-copy mode even if the real NIC drivers do. Note that the driver used to report everything as supported before a device was bonded. Instead of just masking out the zero-copy support from this, have the driver report that no XDP feature is supported until a real device is bonded. This seems to be more truthful as it is the real drivers that decide what XDP features are supported. Fixes: cb9e6e58 ("bonding: add xdp_features support") Reported-by:
Prashant Batra <prbatra.mail@gmail.com> Link: https://lore.kernel.org/all/CAJ8uoz2ieZCopgqTvQ9ZY6xQgTbujmC6XkMTamhp68O-h_-rLg@mail.gmail.com/T/Signed-off-by:
Magnus Karlsson <magnus.karlsson@intel.com> Reviewed-by:
Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20240207084737.20890-1-magnus.karlsson@gmail.comSigned-off-by:
-
Chuck Lever authored
Recently, handshake_req_destroy_test1 started failing: Expected handshake_req_destroy_test == req, but handshake_req_destroy_test == 0000000000000000 req == 0000000060f99b40 not ok 11 req_destroy works This is because "sock_release(sock)" was replaced with "fput(filp)" to address a memory leak. Note that sock_release() is synchronous but fput() usually delays the final close and clean-up. The delay is not consequential in the other cases that were changed but handshake_req_destroy_test1 is testing that handshake_req_cancel() followed by closing the file actually does call the ->hp_destroy method. Thus the PTR_EQ test at the end has to be sure that the final close is complete before it checks the pointer. We cannot use a completion here because if ->hp_destroy is never called (ie, there is an API bug) then the test will hang. Reported by: Guenter Roeck <linux@roeck-us.net> Closes: https://lore.kernel.org/netdev/ZcKDd1to4MPANCrn@tissot.1015granger.net/T/#mac5c6299f86799f1c71776f3a07f9c566c7c3c40 Fixes: 4a0f07d7 ("net/handshake: Fix memory leak in __sock_create() and sock_alloc_file()") Signed-off-by:Chuck Lever <chuck.lever@oracle.com> Reviewed-by:
Hannes Reinecke <hare@suse.de> Link: https://lore.kernel.org/r/170724699027.91401.7839730697326806733.stgit@oracle-102.nfsv4bat.orgSigned-off-by:
-
Jiri Pirko authored
I managed to hit following use after free warning recently: [ 2169.711665] ================================================================== [ 2169.714009] BUG: KASAN: slab-use-after-free in __run_timers.part.0+0x179/0x4c0 [ 2169.716293] Write of size 8 at addr ffff88812b326a70 by task swapper/4/0 [ 2169.719022] CPU: 4 PID: 0 Comm: swapper/4 Not tainted 6.8.0-rc2jiri+ #2 [ 2169.720974] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 2169.722457] Call Trace: [ 2169.722756] <IRQ> [ 2169.723024] dump_stack_lvl+0x58/0xb0 [ 2169.723417] print_report+0xc5/0x630 [ 2169.723807] ? __virt_addr_valid+0x126/0x2b0 [ 2169.724268] kasan_report+0xbe/0xf0 [ 2169.724667] ? __run_timers.part.0+0x179/0x4c0 [ 2169.725116] ? __run_timers.part.0+0x179/0x4c0 [ 2169.725570] __run_timers.part.0+0x179/0x4c0 [ 2169.726003] ? call_timer_fn+0x320/0x320 [ 2169.726404] ? lock_downgrade+0x3a0/0x3a0 [ 2169.726820] ? kvm_clock_get_cycles+0x14/0x20 [ 2169.727257] ? ktime_get+0x92/0x150 [ 2169.727630] ? lapic_next_deadline+0x35/0x60 [ 2169.728069] run_timer_softirq+0x40/0x80 [ 2169.728475] __do_softirq+0x1a1/0x509 [ 2169.728866] irq_exit_rcu+0x95/0xc0 [ 2169.729241] sysvec_apic_timer_interrupt+0x6b/0x80 [ 2169.729718] </IRQ> [ 2169.729993] <TASK> [ 2169.730259] asm_sysvec_apic_timer_interrupt+0x16/0x20 [ 2169.730755] RIP: 0010:default_idle+0x13/0x20 [ 2169.731190] Code: c0 08 00 00 00 4d 29 c8 4c 01 c7 4c 29 c2 e9 72 ff ff ff cc cc cc cc 8b 05 9a 7f 1f 02 85 c0 7e 07 0f 00 2d cf 69 43 00 fb f4 <fa> c3 66 66 2e 0f 1f 84 00 00 00 00 00 65 48 8b 04 25 c0 93 04 00 [ 2169.732759] RSP: 0018:ffff888100dbfe10 EFLAGS: 00000242 [ 2169.733264] RAX: 0000000000000001 RBX: ffff888100d9c200 RCX: ffffffff8241bd62 [ 2169.733925] RDX: ffffed109a848b15 RSI: 0000000000000004 RDI: ffffffff8127ac55 [ 2169.734566] RBP: 0000000000000004 R08: 0000000000000000 R09: ffffed109a848b14 [ 2169.735200] R10: ffff8884d42458a3 R11: 000000000000ba7e R12: ffffffff83d7d3a0 [ 2169.735835] R13: 1ffff110201b7fc6 R14: 0000000000000000 R15: ffff888100d9c200 [ 2169.736478] ? ct_kernel_exit.constprop.0+0xa2/0xc0 [ 2169.736954] ? do_idle+0x285/0x290 [ 2169.737323] default_idle_call+0x63/0x90 [ 2169.737730] do_idle+0x285/0x290 [ 2169.738089] ? arch_cpu_idle_exit+0x30/0x30 [ 2169.738511] ? mark_held_locks+0x1a/0x80 [ 2169.738917] ? lockdep_hardirqs_on_prepare+0x12e/0x200 [ 2169.739417] cpu_startup_entry+0x30/0x40 [ 2169.739825] start_secondary+0x19a/0x1c0 [ 2169.740229] ? set_cpu_sibling_map+0xbd0/0xbd0 [ 2169.740673] secondary_startup_64_no_verify+0x15d/0x16b [ 2169.741179] </TASK> [ 2169.741686] Allocated by task 1098: [ 2169.742058] kasan_save_stack+0x1c/0x40 [ 2169.742456] kasan_save_track+0x10/0x30 [ 2169.742852] __kasan_kmalloc+0x83/0x90 [ 2169.743246] mlx5_dpll_probe+0xf5/0x3c0 [mlx5_dpll] [ 2169.743730] auxiliary_bus_probe+0x62/0xb0 [ 2169.744148] really_probe+0x127/0x590 [ 2169.744534] __driver_probe_device+0xd2/0x200 [ 2169.744973] device_driver_attach+0x6b/0xf0 [ 2169.745402] bind_store+0x90/0xe0 [ 2169.745761] kernfs_fop_write_iter+0x1df/0x2a0 [ 2169.746210] vfs_write+0x41f/0x790 [ 2169.746579] ksys_write+0xc7/0x160 [ 2169.746947] do_syscall_64+0x6f/0x140 [ 2169.747333] entry_SYSCALL_64_after_hwframe+0x46/0x4e [ 2169.748049] Freed by task 1220: [ 2169.748393] kasan_save_stack+0x1c/0x40 [ 2169.748789] kasan_save_track+0x10/0x30 [ 2169.749188] kasan_save_free_info+0x3b/0x50 [ 2169.749621] poison_slab_object+0x106/0x180 [ 2169.750044] __kasan_slab_free+0x14/0x50 [ 2169.750451] kfree+0x118/0x330 [ 2169.750792] mlx5_dpll_remove+0xf5/0x110 [mlx5_dpll] [ 2169.751271] auxiliary_bus_remove+0x2e/0x40 [ 2169.751694] device_release_driver_internal+0x24b/0x2e0 [ 2169.752191] unbind_store+0xa6/0xb0 [ 2169.752563] kernfs_fop_write_iter+0x1df/0x2a0 [ 2169.753004] vfs_write+0x41f/0x790 [ 2169.753381] ksys_write+0xc7/0x160 [ 2169.753750] do_syscall_64+0x6f/0x140 [ 2169.754132] entry_SYSCALL_64_after_hwframe+0x46/0x4e [ 2169.754847] Last potentially related work creation: [ 2169.755315] kasan_save_stack+0x1c/0x40 [ 2169.755709] __kasan_record_aux_stack+0x9b/0xf0 [ 2169.756165] __queue_work+0x382/0x8f0 [ 2169.756552] call_timer_fn+0x126/0x320 [ 2169.756941] __run_timers.part.0+0x2ea/0x4c0 [ 2169.757376] run_timer_softirq+0x40/0x80 [ 2169.757782] __do_softirq+0x1a1/0x509 [ 2169.758387] Second to last potentially related work creation: [ 2169.758924] kasan_save_stack+0x1c/0x40 [ 2169.759322] __kasan_record_aux_stack+0x9b/0xf0 [ 2169.759773] __queue_work+0x382/0x8f0 [ 2169.760156] call_timer_fn+0x126/0x320 [ 2169.760550] __run_timers.part.0+0x2ea/0x4c0 [ 2169.760978] run_timer_softirq+0x40/0x80 [ 2169.761381] __do_softirq+0x1a1/0x509 [ 2169.761998] The buggy address belongs to the object at ffff88812b326a00 which belongs to the cache kmalloc-256 of size 256 [ 2169.763061] The buggy address is located 112 bytes inside of freed 256-byte region [ffff88812b326a00, ffff88812b326b00) [ 2169.764346] The buggy address belongs to the physical page: [ 2169.764866] page:000000000f2b1e89 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x12b324 [ 2169.765731] head:000000000f2b1e89 order:2 entire_mapcount:0 nr_pages_mapped:0 pincount:0 [ 2169.766484] anon flags: 0x200000000000840(slab|head|node=0|zone=2) [ 2169.767048] page_type: 0xffffffff() [ 2169.767422] raw: 0200000000000840 ffff888100042b40 0000000000000000 dead000000000001 [ 2169.768183] raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000 [ 2169.768899] page dumped because: kasan: bad access detected [ 2169.769649] Memory state around the buggy address: [ 2169.770116] ffff88812b326900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 2169.770805] ffff88812b326980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 2169.771485] >ffff88812b326a00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 2169.772173] ^ [ 2169.772787] ffff88812b326a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 2169.773477] ffff88812b326b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 2169.774160] ================================================================== [ 2169.774845] ================================================================== I didn't manage to reproduce it. Though the issue seems to be obvious. There is a chance that the mlx5_dpll_remove() calls cancel_delayed_work() when the work runs and manages to re-arm itself. In that case, after delay timer triggers next attempt to queue it, it works with freed memory. Fix this by using cancel_delayed_work_sync() instead which makes sure that work is done when it returns. Fixes: 496fd0a2 ("mlx5: Implement SyncE support using DPLL infrastructure") Signed-off-by: -
Jiri Pirko authored
Recently, I've been hitting following deadlock warning during dpll pin dump: [52804.637962] ====================================================== [52804.638536] WARNING: possible circular locking dependency detected [52804.639111] 6.8.0-rc2jiri+ #1 Not tainted [52804.639529] ------------------------------------------------------ [52804.640104] python3/2984 is trying to acquire lock: [52804.640581] ffff88810e642678 (nlk_cb_mutex-GENERIC){+.+.}-{3:3}, at: netlink_dump+0xb3/0x780 [52804.641417] but task is already holding lock: [52804.642010] ffffffff83bde4c8 (dpll_lock){+.+.}-{3:3}, at: dpll_lock_dumpit+0x13/0x20 [52804.642747] which lock already depends on the new lock. [52804.643551] the existing dependency chain (in reverse order) is: [52804.644259] -> #1 (dpll_lock){+.+.}-{3:3}: [52804.644836] lock_acquire+0x174/0x3e0 [52804.645271] __mutex_lock+0x119/0x1150 [52804.645723] dpll_lock_dumpit+0x13/0x20 [52804.646169] genl_start+0x266/0x320 [52804.646578] __netlink_dump_start+0x321/0x450 [52804.647056] genl_family_rcv_msg_dumpit+0x155/0x1e0 [52804.647575] genl_rcv_msg+0x1ed/0x3b0 [52804.648001] netlink_rcv_skb+0xdc/0x210 [52804.648440] genl_rcv+0x24/0x40 [52804.648831] netlink_unicast+0x2f1/0x490 [52804.649290] netlink_sendmsg+0x36d/0x660 [52804.649742] __sock_sendmsg+0x73/0xc0 [52804.650165] __sys_sendto+0x184/0x210 [52804.650597] __x64_sys_sendto+0x72/0x80 [52804.651045] do_syscall_64+0x6f/0x140 [52804.651474] entry_SYSCALL_64_after_hwframe+0x46/0x4e [52804.652001] -> #0 (nlk_cb_mutex-GENERIC){+.+.}-{3:3}: [52804.652650] check_prev_add+0x1ae/0x1280 [52804.653107] __lock_acquire+0x1ed3/0x29a0 [52804.653559] lock_acquire+0x174/0x3e0 [52804.653984] __mutex_lock+0x119/0x1150 [52804.654423] netlink_dump+0xb3/0x780 [52804.654845] __netlink_dump_start+0x389/0x450 [52804.655321] genl_family_rcv_msg_dumpit+0x155/0x1e0 [52804.655842] genl_rcv_msg+0x1ed/0x3b0 [52804.656272] netlink_rcv_skb+0xdc/0x210 [52804.656721] genl_rcv+0x24/0x40 [52804.657119] netlink_unicast+0x2f1/0x490 [52804.657570] netlink_sendmsg+0x36d/0x660 [52804.658022] __sock_sendmsg+0x73/0xc0 [52804.658450] __sys_sendto+0x184/0x210 [52804.658877] __x64_sys_sendto+0x72/0x80 [52804.659322] do_syscall_64+0x6f/0x140 [52804.659752] entry_SYSCALL_64_after_hwframe+0x46/0x4e [52804.660281] other info that might help us debug this: [52804.661077] Possible unsafe locking scenario: [52804.661671] CPU0 CPU1 [52804.662129] ---- ---- [52804.662577] lock(dpll_lock); [52804.662924] lock(nlk_cb_mutex-GENERIC); [52804.663538] lock(dpll_lock); [52804.664073] lock(nlk_cb_mutex-GENERIC); [52804.664490] The issue as follows: __netlink_dump_start() calls control->start(cb) with nlk->cb_mutex held. In control->start(cb) the dpll_lock is taken. Then nlk->cb_mutex is released and taken again in netlink_dump(), while dpll_lock still being held. That leads to ABBA deadlock when another CPU races with the same operation. Fix this by moving dpll_lock taking into dumpit() callback which ensures correct lock taking order. Fixes: 9d71b54b ("dpll: netlink: Add DPLL framework base functions") Signed-off-by:Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Link: https://lore.kernel.org/r/20240207115902.371649-1-jiri@resnulli.usSigned-off-by:
-
- 08 Feb, 2024 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Paolo Abeni: "Including fixes from WiFi and netfilter. Current release - regressions: - nic: intel: fix old compiler regressions - netfilter: ipset: missing gc cancellations fixed Current release - new code bugs: - netfilter: ctnetlink: fix filtering for zone 0 Previous releases - regressions: - core: fix from address in memcpy_to_iter_csum() - netfilter: nfnetlink_queue: un-break NF_REPEAT - af_unix: fix memory leak for dead unix_(sk)->oob_skb in GC. - devlink: avoid potential loop in devlink_rel_nested_in_notify_work() - iwlwifi: - mvm: fix a battery life regression - fix double-free bug - mac80211: fix waiting for beacons logic - nic: nfp: flower: prevent re-adding mac index for bonded port Previous releases - always broken: - rxrpc: fix generation of serial numbers to skip zero - tipc: check the bearer type before calling tipc_udp_nl_bearer_add() - tunnels: fix out of bounds access when building IPv6 PMTU error - nic: hv_netvsc: register VF in netvsc_probe if NET_DEVICE_REGISTER missed - nic: atlantic: fix DMA mapping for PTP hwts ring Misc: - selftests: more fixes to deal with very slow hosts" * tag 'net-6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (80 commits) netfilter: nft_set_pipapo: remove scratch_aligned pointer netfilter: nft_set_pipapo: add helper to release pcpu scratch area netfilter: nft_set_pipapo: store index in scratch maps netfilter: nft_set_rbtree: skip end interval element from gc netfilter: nfnetlink_queue: un-break NF_REPEAT netfilter: nf_tables: use timestamp to check for set element timeout netfilter: nft_ct: reject direction for ct id netfilter: ctnetlink: fix filtering for zone 0 s390/qeth: Fix potential loss of L3-IP@ in case of network issues netfilter: ipset: Missing gc cancellations fixed octeontx2-af: Initialize maps. net: ethernet: ti: cpsw: enable mac_managed_pm to fix mdio net: ethernet: ti: cpsw_new: enable mac_managed_pm to fix mdio netfilter: nft_set_pipapo: remove static in nft_pipapo_get() netfilter: nft_compat: restrict match/target protocol to u16 netfilter: nft_compat: reject unused compat flag netfilter: nft_compat: narrow down revision to unsigned 8-bits net: intel: fix old compiler regressions MAINTAINERS: Maintainer change for rds selftests: cmsg_ipv6: repeat the exact packet ... -
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds authored
Pull pinctrl fix from Linus Walleij: "A single fix for the AMD driver which affects developer laptops, the pinctrl/GPIO driver won't probe on some systems" * tag 'pinctrl-v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: amd: Add IRQF_ONESHOT to the interrupt request
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfPaolo Abeni authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Narrow down target/match revision to u8 in nft_compat. 2) Bail out with unused flags in nft_compat. 3) Restrict layer 4 protocol to u16 in nft_compat. 4) Remove static in pipapo get command that slipped through when reducing set memory footprint. 5) Follow up incremental fix for the ipset performance regression, this includes the missing gc cancellation, from Jozsef Kadlecsik. 6) Allow to filter by zone 0 in ctnetlink, do not interpret zone 0 as no filtering, from Felix Huettner. 7) Reject direction for NFT_CT_ID. 8) Use timestamp to check for set element expiration while transaction is handled to prevent garbage collection from removing set elements that were just added by this transaction. Packet path and netlink dump/get path still use current time to check for expiration. 9) Restore NF_REPEAT in nfnetlink_queue, from Florian Westphal. 10) map_index needs to be percpu and per-set, not just percpu. At this time its possible for a pipapo set to fill the all-zero part with ones and take the 'might have bits set' as 'start-from-zero' area. From Florian Westphal. This includes three patches: - Change scratchpad area to a structure that provides space for a per-set-and-cpu toggle and uses it of the percpu one. - Add a new free helper to prepare for the next patch. - Remove the scratch_aligned pointer and makes AVX2 implementation use the exact same memory addresses for read/store of the matching state. netfilter pull request 24-02-08 * tag 'nf-24-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nft_set_pipapo: remove scratch_aligned pointer netfilter: nft_set_pipapo: add helper to release pcpu scratch area netfilter: nft_set_pipapo: store index in scratch maps netfilter: nft_set_rbtree: skip end interval element from gc netfilter: nfnetlink_queue: un-break NF_REPEAT netfilter: nf_tables: use timestamp to check for set element timeout netfilter: nft_ct: reject direction for ct id netfilter: ctnetlink: fix filtering for zone 0 netfilter: ipset: Missing gc cancellations fixed netfilter: nft_set_pipapo: remove static in nft_pipapo_get() netfilter: nft_compat: restrict match/target protocol to u16 netfilter: nft_compat: reject unused compat flag netfilter: nft_compat: narrow down revision to unsigned 8-bits ==================== Link: https://lore.kernel.org/r/20240208112834.1433-1-pablo@netfilter.orgSigned-off-by:
-
