Add documentation for the devlink feature prestera switchdev driver supports:
add description for the support of the driver-specific devlink traps
(include both traps with action TRAP and action DROP);
Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add traps that have init_action being set to DROP.
Add 'trap_drop_counter_get' (devlink API) callback implementation,
that is used to get number of packets that have been dropped by the HW
(traps with action 'DROP').
Add new FW command CPU_CODE_COUNTERS_GET.
Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add devlink traps registration (with corresponding groups) for
all the traffic types that driver traps to the CPU;
prestera_rxtx: report each packet trapped to the CPU (RX) to the
prestera_devlink;
Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add hard drop counter check testcase, to make sure netdevsim driver
properly handles the devlink hard drop counters get/set callbacks.
Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>

Whenever query statistics is issued for trap with DROP action,
devlink subsystem would also fill-in statistics 'dropped' field.
In case if device driver did't register callback for hard drop
statistics querying, 'dropped' field will be omitted and not filled.
Add trap_drop_counter_get callback implementation to the netdevsim.
Add new test cases for netdevsim, to test both the callback
functionality, as well as drop statistics alteration check.
Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>

testing: selftests: net: forwarding: add devlink-required functionality to test (hard) dropped stats field

Add devlink_trap_drop_packets_get function, as well as test that are
used to verify devlink (hard) dropped stats functionality works.
Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>

Whenever query statistics is issued for trap, devlink subsystem
would also fill-in statistics 'dropped' field. This field indicates
the number of packets HW dropped and failed to report to the device driver,
and thus - to the devlink subsystem itself.
In case if device driver didn't register callback for hard drop
statistics querying, 'dropped' field will be omitted and not filled.
Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>

Author forgot to remove that flag.

Fixes: f7af616c ("net: iosm: infrastructure")
Reported-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The 3rd argument is u32 by function definition while it is __be32
by function declaration.
Signed-off-by: Lijun Pan <lijunp213@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Oleksij Rempel says:

====================
provide cable test support for the ksz886x switch

changes v5:
- drop resume() patch
- add Reviewed-by tags.
- rework dsa_slave_phy_connect() patch

changes v4:
- use fallthrough;
- use EOPNOTSUPP instead of ENOTSUPP
- drop flags variable in dsa_slave_phy_connect patch
- extend description for the "net: phy: micrel: apply resume errat"
  patch
- fix "use consistent alignments" patch

changes v3:
- remove RFC tag

changes v2:
- use generic MII_* defines where possible
- rework phylink validate
- remove phylink get state function
- reorder cabletest patches to make PHY flag patch in the right order
- fix MDI-X detection

This patches provide support for cable testing on the ksz886x switches.
Since it has one special port, we needed to add phylink with validation
and extra quirk for the PHY to signal, that one port will not provide
valid cable testing reports.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch support for cable test for the ksz886x switches and the
ksz8081 PHY.

The patch was tested on a KSZ8873RLL switch with following results:

- port 1:
  - provides invalid values, thus return -ENOTSUPP
    (Errata: DS80000830A: "LinkMD does not work on Port 1",
     http://ww1.microchip.com/downloads/en/DeviceDoc/KSZ8873-Errata-DS80000830A.pdf)

- port 2:
  - can detect distance
  - can detect open on each wire of pair A (wire 1 and 2)
  - can detect open only on one wire of pair B (only wire 3)
  - can detect short between wires of a pair (wires 1 + 2 or 3 + 6)
  - short between pairs is detected as open.
    For example short between wires 2 + 3 is detected as open.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The current get_phy_flags() is only processed when we connect to a PHY
via a designed phy-handle property via phylink_of_phy_connect(), but if
we fallback on the internal MDIO bus created by a switch and take the
dsa_slave_phy_connect() path then we would not be processing that flag
and using it at PHY connection time.
Suggested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add mapping for LINK_MD register to enable cable testing functionality.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for MDI-X status and configuration
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for MDI-X status and configuration
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch changes the alignments to one space between "#define" and the
macro.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds the phylink support to the ksz8795 driver to provide
configuration exceptions on quirky KSZ8863 and KSZ8873 ports.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some micrel devices share the same PHY register defines. This patch
moves them to one common header so other drivers can reuse them.
And reuse generic MII_* defines where possible.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If link mtu is too big, mld_newpack() allocates high-order page.
But most mld packets don't need high-order page.
So, it might waste unnecessary pages.
To avoid this, it makes mld_newpack() try to allocate order-0 page.
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

A recent change tidied up some conditional code, avoiding the use of
some #ifdefs.  Unfortunately, if CONFIG_IPV6 was not enabled, it
meant that two functions were referenced but never defined.

The easiest fix is to just define stubs for these functions if
CONFIG_IPV6 is not defined.  This will soon be simplified further
by some other development in the works...
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 75db5b07 ("net: qualcomm: rmnet: eliminate some ifdefs")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The variable err is being initialized with a value that is never read, the
assignment is redundant and can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The pointer of_node is being initialized with a value that is never
read and it is being updated later with a new value inside a do-while
loop. The initialization is redundant and can be removed and the
pointer dev is no longer required and can be removed too.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Current MCAM allocation scheme allocates a single lot of
MCAM entries for ntuple filters, unicast filters and VF VLAN
rules. This patch attempts to cleanup this logic by segregating
MCAM rule allocation and management for Ntuple rules and unicast,
VF VLAN rules. This segregation will result in reusing most of
the logic for supporting ntuple filters for VF devices.

Also added debug messages for MCAM entry allocation failures.
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Test cleanup path for routes usinig nexthop objects before the
reference is taken on the nexthop. Specifically, bad metric for
ipv4 and ipv6 and source routing for ipv6.

Selftests that correspond to the recent bug fix:
    821bbf79 ("ipv6: Fix KASAN: slab-out-of-bounds Read in fib6_nh_flush_exceptions")
Signed-off-by: David Ahern <dsahern@kernel.org>
Cc: Coco Li <lixiaoyan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

M Chetan Kumar says:

====================
net: iosm: PCIe Driver for Intel M.2 Modem

The IOSM (IPC over Shared Memory) driver is a PCIe host driver implemented
for linux or chrome platform for data exchange over PCIe interface between
Host platform & Intel M.2 Modem. The driver exposes interface conforming to
the MBIM protocol. Any front end application ( eg: Modem Manager) could
easily manage the MBIM interface to enable data communication towards WWAN.

Intel M.2 modem uses 2 BAR regions. The first region is dedicated to Doorbell
register for IRQs and the second region is used as scratchpad area for book
keeping modem execution stage details along with host system shared memory
region context details. The upper edge of the driver exposes the control and
data channels for user space application interaction. At lower edge these data
and control channels are associated to pipes. The pipes are lowest level
interfaces used over PCIe as a logical channel for message exchange. A single
channel maps to UL and DL pipe and are initialized on device open.

On UL path, driver copies application sent data to SKBs associate it with
transfer descriptor and puts it on to ring buffer for DMA transfer. Once
information has been updated in shared memory region, host gives a Doorbell
to modem to perform DMA and modem uses MSI to communicate back to host.
For receiving data in DL path, SKBs are pre-allocated during pipe open and
transfer descriptors are given to modem for DMA transfer.

The driver exposes two types of ports, namely "wwan0mbim0", a char device node
which is used for MBIM control operation and "wwan0-x",(x = 0,1,2..7) network
interfaces for IP data communication.
1) MBIM Control Interface:
This node exposes an interface between modem and application using char device
exposed by "IOSM" driver to establish and manage the MBIM data communication
with PCIe based Intel M.2 Modems.

2) MBIM Data Interface:
The IOSM driver exposes IP link interface "wwan0-x" of type "wwan" for IP traffic.
Iproute network utility is used for creating "wwan0-x" network interface and for
associating it with MBIM IP session. The Driver supports upto 8 IP sessions for
simultaneous IP communication.

This applies on top of WWAN core rtnetlink series posted here:
https://lore.kernel.org/netdev/1623486057-13075-1-git-send-email-loic.poulain@linaro.org/

Also driver has been compiled and tested on top of netdev net-next tree.
https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

1) Kconfig & Makefile changes for IOSM Driver compilation.
2) Add IOSM Driver documentation.
3) Modified MAINTAINER file for IOSM Driver addition.
Signed-off-by: M Chetan Kumar <m.chetan.kumar@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1) Create net device & implement net operations for data/IP communication.
2) Bind IP Link to mux IP session for simultaneous IP traffic.
Signed-off-by: M Chetan Kumar <m.chetan.kumar@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Report modem status via uevent.
Signed-off-by: M Chetan Kumar <m.chetan.kumar@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1) Update UL/DL transfer descriptors in message ring.
2) Define message set for pipe/sleep protocol.
Signed-off-by: M Chetan Kumar <m.chetan.kumar@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1) Defines messaging protocol for handling Transfer Descriptor
   in both UL/DL direction.
2) Ring buffer management.
Signed-off-by: M Chetan Kumar <m.chetan.kumar@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Implements state machine to handle host & device sleep.
Signed-off-by: M Chetan Kumar <m.chetan.kumar@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1) Encode UL packet into datagram.
2) Decode DL datagram and route it to network layer.
3) Supports credit based flow control.
Signed-off-by: M Chetan Kumar <m.chetan.kumar@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Establish IP session between host-device & session management.
Signed-off-by: M Chetan Kumar <m.chetan.kumar@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1) Bottom half(tasklet) for IRQ and task processing.
2) Tasks are processed asynchronous and synchronously.
Signed-off-by: M Chetan Kumar <m.chetan.kumar@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Implements wwan port for MBIM & AT protocol communication
Signed-off-by: M Chetan Kumar <m.chetan.kumar@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Defines pipes & channel configurations like channel type,
pipe mappings, No. of transfer descriptors and transfer
buffer size etc.
Signed-off-by: M Chetan Kumar <m.chetan.kumar@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1) Binds logical channel between host-device for communication.
2) Implements device specific(Char/Net) IO operations.
Signed-off-by: M Chetan Kumar <m.chetan.kumar@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1) Initializes shared memory for host-device communication.
2) Allocate resources required for control & data operations.
3) Transfers the Device IRQ to IPC execution thread.
4) Defines the timer cbs for async events.
Signed-off-by: M Chetan Kumar <m.chetan.kumar@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1) Initializes the Scratchpad region for Host-Device communication.
2) Exposes device capabilities like chip info and device execution
   stages.
Signed-off-by: M Chetan Kumar <m.chetan.kumar@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1) Request interrupt vector, frees allocated resource.
2) Registers IRQ handler.
Signed-off-by: M Chetan Kumar <m.chetan.kumar@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>