- 23 Feb, 2011 23 commits
-
-
Mike McCormack authored
Signed-off-by:
Mike McCormack <mikem@ring3k.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Roland Vossen authored
Increasing robustness of the code, although no problem has been reported in the field. Several code paths were unshielded for multi thread access. Several lock acquisitions have been added to wl_mac80211.c Signed-off-by:
Roland Vossen <rvossen@broadcom.com> Reviewed-by:
Arend van Spriel <arend@broadcom.com> Reviewed-by:
Brett Rudley <brudley@broadcom.com> Signed-off-by:
-
Roland Vossen authored
A spinlock was acquired prior to calling the Mac80211 functions ieee80211_wake_queues() and ieee80211_stop_queues() and Cfg80211 functions wiphy_rfkill_set_hw_state() and wiphy_rfkill_start_polling(). This is not required and could even lead to instability. Therefore the locks were removed. Signed-off-by:
-
Roland Vossen authored
Code cleanup. Added lock related comments to wl_mac80211.c. Also removed a redundant function definition. Signed-off-by:
-
Arend van Spriel authored
In the struct wlc_bsscfg a couple of attribute were held under a preprocessor definition, but these are not needed in the mac80211 driver context. Signed-off-by:
-
Arend van Spriel authored
When associated on 5G the driver receives a probe request for 2G with a 2G rate specified. The driver asserts as the operating band is still 5G when the probe request packet is given. Root cause was that ioctl function did fail upon setting the channel as requested by mac80211 when we are associated. Signed-off-by:
-
Stanislav Fomichev authored
- move ltoh16_buf/htol16_buf util/bcmsrom.c - replace ltoh16_buf in brcmsmac/wlc_mac80211.c with several le16_to_cpu's Signed-off-by:
Stanislav Fomichev <kernel@fomichev.me> Signed-off-by:
-
Stanislav Fomichev authored
htod32 -> cpu_to_le32 htod16 -> cpu_to_le16 dtoh32 -> le32_to_cpu dtoh16 -> le16_to_cpu For brcmfmac/dhd_common.c just removed defines. Signed-off-by:
-
Stanislav Fomichev authored
- BCMSWAP32 - bcmswap32 - BCMSWAP32BY16 - bcmswap32by16 Signed-off-by:
-
Stanislav Fomichev authored
htol16_ua_store -> put_unaligned_le16 htol32_ua_store -> put_unaligned_le32 hton16_ua_store -> put_unaligned_be16 hton32_ua_store -> put_unaligned_be32 ltoh16_ua -> get_unaligned_le16 ltoh32_ua -> get_unaligned_le32 ntoh16_ua -> get_unaligned_be16 ntoh32_ua -> get_unaligned_be32 removed unused: - load32_ua - load16_ua - store32_ua - store16_ua - ltoh_ua - ntoh_au Signed-off-by:
-
Stanislav Fomichev authored
HTON16/hton16 -> cpu_to_be16 (htons for networking code) HTON32/hton32 -> cpu_to_be32 (htonl for networking code) NTOH16/ntoh32 -> be16_to_cpu (ntohs for networking code) NTOH32/ntoh32 -> be32_to_cpu (ntohl for networking code) LTOH16/ltoh16 -> le16_to_cpu LTOH32/ltoh32 -> le32_to_cpu HTOL16/htol16 -> cpu_to_le16 HTOL32/htol32 -> cpu_to_le32 Signed-off-by:
-
Roland Vossen authored
With heavy transmit traffic, once in a while (range 15mins-1hr) a tx packet was added to a full transmit queue. Under certain conditions an other packet in the queue gets bumped to make room for the new packet. This is not considered an error condition, but normal operation. Despite that, there was an ASSERT(0) that caused the driver to oops. The ASSERT(0) has been removed. Driver was tested afterwards. Signed-off-by:
-
Nitin Gupta authored
Both zram and zcache use xvmalloc allocator. If xvmalloc is compiled separately for both of them, we will get linker error if they are both selected as "built-in". We can also get linker error regarding missing xvmalloc symbols if zram is not built. So, we now compile xvmalloc separately and export its symbols which are then used by both of zram and zcache. Signed-off-by:
Nitin Gupta <ngupta@vflare.org> Acked-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Vipin Mehta authored
Cancel the pending scan operation once the interface is going down to avoid warnings from the cfg80211 module. Once the interface is down, cfg80211 checks for any pending scan requests and dumps a warning if it finds one. It expects the driver to abort any ongoing scan operation once the driver detects that the interface is going down. Signed-off-by:
Vipin Mehta <vmehta@atheros.com> Signed-off-by:
-
Dan Carpenter authored
We should check that optTxFrmCmd.optIEDataLen isn't too large before we copy it into the data buffer. Signed-off-by:
Dan Carpenter <error27@gmail.com> Acked-by:
Vipin Mehta <vipin.mehta@atheros.com> Signed-off-by:
-
Dan Carpenter authored
The original code was written in a funny way where every statement was part of else if blocks. I broke them up into separate statements by adding breaks on failure conditions. Signed-off-by:
-
Luis R. Rodriguez authored
This updates the TODO file to reflect new changes on development. Cc: Joe Perches <joe@perches.com> Cc: Naveen Singh <nsingh@atheros.com> Signed-off-by:
Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by:
-
Greg Kroah-Hartman authored
Lots of little ones all through the driver, mostly all in a cut-and-paste header comment. Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: -
Greg Kroah-Hartman authored
The mod.c file should not be part of the repo. Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: -
Alan Cox authored
This is an initial staging driver for the GMA500. It's been stripped out of the PVR drivers and crunched together from various bits of code and different kernels. Currently it's unaccelerated but still pretty snappy even compositing with the frame buffer X server. Lots of work is needed to rework the ttm and bo interfaces from being ripped out and then 2D acceleration wants putting back for framebuffer and somehow eventually via DRM. There is no support for the parts without open source userspace (video accelerators, 3D) as per kernel policy. Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Joe Perches authored
Allow more const declarations. Signed-off-by:
Joe Perches <joe@perches.com> Acked-by:
Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by:
-
Haiyang Zhang authored
In a previous commit, 7a09876d, ASSERT was changed to WARN_ON, but the condition wasn't updated. This patch fixed this error. Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
Hank Janssen <hjanssen@microsoft.com> Signed-off-by:
-
Haiyang Zhang authored
These fields have been assigned in netvsc_drv_init() before calling netvsc_initialize(), so there is no need to check them. The ASSERTs were already commented out, and this patch removes them. Signed-off-by:
-
- 18 Feb, 2011 17 commits
-
-
Uwe Kleine-König authored
Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Uwe Kleine-König authored
Signed-off-by:
-
Uwe Kleine-König authored
Signed-off-by:
-
Uwe Kleine-König authored
Signed-off-by:
-
Uwe Kleine-König authored
Signed-off-by:
-
Uwe Kleine-König authored
Signed-off-by:
-
Uwe Kleine-König authored
Signed-off-by:
-
Uwe Kleine-König authored
Signed-off-by:
-
Uwe Kleine-König authored
Signed-off-by:
-
Uwe Kleine-König authored
Signed-off-by:
-
Uwe Kleine-König authored
Signed-off-by:
-
Vipin Mehta authored
When jiffies wrap-over, all the BSS in the cache is removed. Wrap-over of jiffies is not handled in the correct way. This cause the scan list to go empty during this time for a small duration Signed-off-by:
-
Vipin Mehta authored
Fixing the code to avoid overwriting of the first index in the probed ssid list maintained by the hardware. This index is used to store broadcast SSID. Signed-off-by:
-
Vipin Mehta authored
Adding state in driver to track the sme state. The connect/disconnect events from the driver were messing up the state maintained within the cfg80211 module. Signed-off-by:
-
Vipin Mehta authored
Fixing the cached copy of the BSS filter set by user. Signed-off-by:
-
Vipin Mehta authored
The patch fixes a mismatch in the allocation and free of scatter HIF bus requests in the suspend/resume path. Signed-off-by:
-
Vipin Mehta authored
Adding host side interface to configure the excessive TX retry threshold. It is used by the target to determine disconnection triggers. Additionally, some definitions have been added to header file wmi.h to bridge the gap for the newly added command. Signed-off-by:
-
