- 07 Dec, 2018 23 commits
-
-
Paul Kocialkowski authored
This introduces two new compatibles for the cedrus driver, for the A64 and H5 platforms. Signed-off-by:
Paul Kocialkowski <paul.kocialkowski@bootlin.com> Reviewed-by:
Rob Herring <robh@kernel.org> Acked-by:
Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Matt Ranostay authored
Not all future supported video chips will always have power management support, and so it is important to check before calling set_power() is defined. Signed-off-by:
Matt Ranostay <matt.ranostay@konsulko.com> Reviewed-by:
Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by:
-
Akinobu Mita authored
AMG88xx has a register for setting operating mode. This adds support runtime PM by changing the operating mode. The instruction for changing sleep mode to normal mode is from the reference specifications. https://docid81hrs3j1.cloudfront.net/medialibrary/2017/11/PANA-S-A0002141979-1.pdfReviewed-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Rob Herring authored
Convert string compares of DT node names to use of_node_name_eq helper instead. This removes direct access to the node name pointer. For instances using of_node_cmp, this has the side effect of now using case sensitive comparisons. This should not matter for any FDT based system which this is. Cc: Steve Longerbeam <slongerbeam@gmail.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: devel@driverdev.osuosl.org Signed-off-by:
-
Luca Ceresoli authored
Control events can be subscribed and received by the user. Therefore drivers that support controls must expose the V4L2_SUBDEV_FL_HAS_EVENTS flag. [As discussed in https://lkml.org/lkml/2018/11/27/637] Reported-by:
Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by:
-
Gabriel Francisco Mandaji authored
Simulate a more precise timestamp by calculating it based on the current framerate. Signed-off-by:
Gabriel Francisco Mandaji <gfmandaji@gmail.com> Signed-off-by:
-
Sergei Shtylyov authored
Add the R8A77980 SoC support to the R-Car VIN driver. Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by:
-
Sergei Shtylyov authored
Add the R-Car V3H (AKA R8A77980) SoC support to the R-Car CSI2 driver. Signed-off-by:
-
Rob Herring authored
Convert string compares of DT node names to use of_node_name_eq helper instead. This removes direct access to the node name pointer. Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Hyun Kwon <hyun.kwon@xilinx.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
Benoit Parrot <bparrot@ti.com> Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Vivek Gautam authored
Turning on CONFIG_DMA_API_DEBUG_SG results in the following error: [ 460.308650] ------------[ cut here ]------------ [ 460.313490] qcom-venus aa00000.video-codec: DMA-API: mapping sg segment longer than device claims to support [len=4194304] [max=65536] [ 460.326017] WARNING: CPU: 3 PID: 3555 at src/kernel/dma/debug.c:1301 debug_dma_map_sg+0x174/0x254 [ 460.338888] Modules linked in: venus_dec venus_enc videobuf2_dma_sg videobuf2_memops hci_uart btqca bluetooth venus_core v4l2_mem2mem videobuf2_v4l2 videobuf2_common ath10k_snoc ath10k_core ath lzo lzo_compress zramjoydev [ 460.375811] CPU: 3 PID: 3555 Comm: V4L2DecoderThre Tainted: G W 4.19.1 #82 [ 460.384223] Hardware name: Google Cheza (rev1) (DT) [ 460.389251] pstate: 60400009 (nZCv daif +PAN -UAO) [ 460.394191] pc : debug_dma_map_sg+0x174/0x254 [ 460.398680] lr : debug_dma_map_sg+0x174/0x254 [ 460.403162] sp : ffffff80200c37d0 [ 460.406583] x29: ffffff80200c3830 x28: 0000000000010000 [ 460.412056] x27: 00000000ffffffff x26: ffffffc0f785ea80 [ 460.417532] x25: 0000000000000000 x24: ffffffc0f4ea1290 [ 460.423001] x23: ffffffc09e700300 x22: ffffffc0f4ea1290 [ 460.428470] x21: ffffff8009037000 x20: 0000000000000001 [ 460.433936] x19: ffffff80091b0000 x18: 0000000000000000 [ 460.439411] x17: 0000000000000000 x16: 000000000000f251 [ 460.444885] x15: 0000000000000006 x14: 0720072007200720 [ 460.450354] x13: ffffff800af536e0 x12: 0000000000000000 [ 460.455822] x11: 0000000000000000 x10: 0000000000000000 [ 460.461288] x9 : 537944d9c6c48d00 x8 : 537944d9c6c48d00 [ 460.466758] x7 : 0000000000000000 x6 : ffffffc0f8d98f80 [ 460.472230] x5 : 0000000000000000 x4 : 0000000000000000 [ 460.477703] x3 : 000000000000008a x2 : ffffffc0fdb13948 [ 460.483170] x1 : ffffffc0fdb0b0b0 x0 : 000000000000007a [ 460.488640] Call trace: [ 460.491165] debug_dma_map_sg+0x174/0x254 [ 460.495307] vb2_dma_sg_alloc+0x260/0x2dc [videobuf2_dma_sg] [ 460.501150] __vb2_queue_alloc+0x164/0x374 [videobuf2_common] [ 460.507076] vb2_core_reqbufs+0xfc/0x23c [videobuf2_common] [ 460.512815] vb2_reqbufs+0x44/0x5c [videobuf2_v4l2] [ 460.517853] v4l2_m2m_reqbufs+0x44/0x78 [v4l2_mem2mem] [ 460.523144] v4l2_m2m_ioctl_reqbufs+0x1c/0x28 [v4l2_mem2mem] [ 460.528976] v4l_reqbufs+0x30/0x40 [ 460.532480] __video_do_ioctl+0x36c/0x454 [ 460.536610] video_usercopy+0x25c/0x51c [ 460.540572] video_ioctl2+0x38/0x48 [ 460.544176] v4l2_ioctl+0x60/0x74 [ 460.547602] do_video_ioctl+0x948/0x3520 [ 460.551648] v4l2_compat_ioctl32+0x60/0x98 [ 460.555872] __arm64_compat_sys_ioctl+0x134/0x20c [ 460.560718] el0_svc_common+0x9c/0xe4 [ 460.564498] el0_svc_compat_handler+0x2c/0x38 [ 460.568982] el0_svc_compat+0x8/0x18 [ 460.572672] ---[ end trace ce209b87b2f3af88 ]--- >From above warning one would deduce that the sg segment will overflow the device's capacity. In reality, the hardware can accommodate larger sg segments. So, initialize the max segment size properly to weed out this warning. Based on a similar patch sent by Sean Paul for mdss: https://patchwork.kernel.org/patch/10671457/Signed-off-by:
Vivek Gautam <vivek.gautam@codeaurora.org> Acked-by:
Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by:
-
Kelvin Lawson authored
Support V4L2 QP parameters in Venus encoder: * V4L2_CID_MPEG_VIDEO_H264_I_FRAME_QP * V4L2_CID_MPEG_VIDEO_H264_B_FRAME_QP * V4L2_CID_MPEG_VIDEO_H264_MIN_QP * V4L2_CID_MPEG_VIDEO_H264_MAX_QP Signed-off-by:
Kelvin Lawson <klawson@lisden.com> Acked-by:
-
Ezequiel Garcia authored
Make the core set the reserved fields to zero in vv4l2_pix_format_mplane.4l2_plane_pix_format, for _MPLANE queue types. Moving this to the core avoids having to do so in each and every driver. Suggested-by:
Tomasz Figa <tfiga@chromium.org> Signed-off-by:
Ezequiel Garcia <ezequiel@collabora.com> Acked-by:
-
Lubomir Rintel authored
Update URL. Signed-off-by:
Lubomir Rintel <lkundrak@v3.sk> Signed-off-by:
-
Todor Tomov authored
My Linaro email address with be inactive very soon so switch it to my Gmail address. Signed-off-by:
Todor Tomov <todor.tomov@linaro.org> Signed-off-by:
-
Paul Kocialkowski authored
We initially introduced a spin lock to ensure that the VPU registers are not accessed concurrently between our setup function and IRQ handler. The V4L2 M2M API ensures that only one decoding job runs at a time, so the interrupt signaling the end of decoding will not occur while the next picture is being configured. Spurious interrupts are taken care of in the handler, by checking that we have a valid M2M context and a decoding status available before marking the buffers as done. In addition, holding a spin lock could be problematic if non-atomic operations are required in the setup process for future codec support. As a result, remove the global IRQ spin lock. Signed-off-by:
-
Colin Ian King authored
There are spelling mistakes in dev_dbg messages, fix them. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
-
Colin Ian King authored
There is a spelling mistake in a pvr2_trace trace message, fix it. Signed-off-by:
-
Philipp Zabel authored
Add support for the third loop filter mode V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_DISABLED_AT_SLICE_BOUNDARY, and fix V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_ALPHA and V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_BETA controls. The filter offset controls are signed values in the -6 to 6 range and are stored into the slice header fields slice_alpha_c0_offset_div2 and slice_beta_offset_div2. The actual filter offsets FilterOffsetA/B are double their value, in range of -12 to 12. Rename variables to more closely match the nomenclature in the H.264 specification. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Philipp Zabel authored
The venus and s5p-mfc drivers add the loop filter alpha/beta offset controls V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_ALPHA/BETA with a range of -6 to +6, inclusive. This is exactly the range specified for the slice header fields slice_alpha_c0_offset_div2 and slice_beta_offset_div2, which store half the actual filter offsets FilterOffsetA/B. Clarify that this control contains the halved offsets. Signed-off-by:
-
Dmitry Osipenko authored
Trace points are much more efficient than debug messages for intensive tracing and could be conveniently enabled / disabled dynamically, hence let's replace debug messages with the trace points. This also makes code a bit cleaner. Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Signed-off-by:
-
Malathi Gottam authored
When client requests for a keyframe, set the property to hardware to generate the sync frame. Signed-off-by:
Malathi Gottam <mgottam@codeaurora.org> Acked-by:
-
Malcolm Priestley authored
Interrupt is always present throughout life time of driver and there is no dma element move this buffer to private area of driver. Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Malcolm Priestley authored
The interrupt urb is killed but never freed add the function Signed-off-by:
-
- 05 Dec, 2018 17 commits
-
-
Andreas Pape authored
usb_control_msg returns in case of a successfully sent message the number of sent bytes as a positive number. Don't use this value as a return value for stk_camera_read_reg, as a non-zero return value is used as an error condition in some cases when stk_camera_read_reg is called. Signed-off-by:
Andreas Pape <ap@ca-pape.de> Reviewed-by:
Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by:
-
Andreas Pape authored
The ASUS A6VM notebook has a built in stk11xx webcam which is mounted in a way that the video is vertically and horizontally flipped. Therefore this notebook is added to the special handling in the driver to automatically flip the video into the correct orientation. Signed-off-by:
-
Mauro Carvalho Chehab authored
As reported by checkpatch.pl, some function calls have a wrong alignment. Signed-off-by: -
Ezequiel Garcia authored
Add a mem2mem driver for the VPU available on Rockchip SoCs. Currently only JPEG encoding is supported, for RK3399 and RK3288 platforms. Signed-off-by:
-
Ezequiel Garcia authored
Add devicetree binding documentation for Rockchip Video Processing Unit IP. Reviewed-by:
-
Mauro Carvalho Chehab authored
Merge from Upstream after the latest media fixes branch, because we need one patch that it is there. * commit '0072a0c1': (1108 commits) ide: Change to use DEFINE_SHOW_ATTRIBUTE macro ide: pmac: add of_node_put() drivers/tty: add missing of_node_put() drivers/sbus/char: add of_node_put() sbus: char: add of_node_put() Linux 4.20-rc5 PCI: Fix incorrect value returned from pcie_get_speed_cap() MAINTAINERS: Update linux-mips mailing list address ocfs2: fix potential use after free mm/khugepaged: fix the xas_create_range() error path mm/khugepaged: collapse_shmem() do not crash on Compound mm/khugepaged: collapse_shmem() without freezing new_page mm/khugepaged: minor reorderings in collapse_shmem() mm/khugepaged: collapse_shmem() remember to clear holes mm/khugepaged: fix crashes due to misaccounted holes mm/khugepaged: collapse_shmem() stop if punched or truncated mm/huge_memory: fix lockdep complaint on 32-bit i_size_read() mm/huge_memory: splitting set mapping+index before unfreeze mm/huge_memory: rename freeze_page() to unmap_page() initramfs: clean old path before creating a hardlink ...
-
Mauro Carvalho Chehab authored
This file is a recent addition to media docs, and it is now the only one without any license. While the best is to dual-license with GFDL and GPL, it is, at least, compatible with GFDL, as this is a requirement to be part of the media uAPI docs. So, add such license to it. Signed-off-by: -
Mauro Carvalho Chehab authored
All Documentation files outside the uAPI are all licensed with, at least, GPL 2.0. So, mark them as such. The ondes at media/uapi are at least GFDL 1.1+. Signed-off-by: -
Mauro Carvalho Chehab authored
Along the time, several image files got replaced by me by new ones with similar contents. As those were not simple conversions, dual-license them. Signed-off-by: -
Mauro Carvalho Chehab authored
All those files are under GFDL 1.1 or later, with no invariant sections. Tag them as such. Signed-off-by: -
Mauro Carvalho Chehab authored
This is not needed there. Also, the same UTF-8 encoding should be used on all documents. Signed-off-by: -
Ben Hutchings authored
The GNU Free Documentation License allows for a work to specify Invariant Sections that are not allowed to be modified. (Debian considers that this makes such works non-free.) The Linux Media Infrastructure userspace API documentation does not specify any such sections, but it also doesn't say there are none (as is recommended by the license text). Make it explicit that there are none. Signed-off-by:
Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
Gerd Hoffmann <kraxel@redhat.com> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Johannes Stezenbach <js@linuxtv.org> Signed-off-by:
Marcus Metzler <mocm@metzlerbros.de> Signed-off-by:
Michael Ira Krufky <mkrufky@gmail.com> Signed-off-by:
Ralph Metzler <rjkm@metzlerbros.de> Signed-off-by:
Sylwester Nawrocki <snawrocki@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Signed-off-by:
-
Dafna Hirschfeld authored
Change variables names in vicodec-core.c to *_src *_dst to improve readability Signed-off-by:
Dafna Hirschfeld <dafna3@gmail.com> Signed-off-by:
-
Niklas Söderlund authored
There is no need to hold the list_lock when initializing the local asd_list of a notifier. Remove the lock handling to simplify the code and remove a potential LOCKDEP warning. Signed-off-by:
Jacopo Mondi <jacopo@jmondi.org> Signed-off-by:
-
Maxime Ripard authored
The autoexposure setup in the 1080p init array is redundant with the default value of the sensor. Remove it. Signed-off-by:
-
Maxime Ripard authored
Now that we have everything in place to compute the clock rate at runtime, we can enable the 60fps framerate for the mode we tested it with. Signed-off-by:
-
Maxime Ripard authored
The current code uses an algorithm to clamp the FPS values and round them to the closest supported one that isn't really allows to be extended to more than two values. Rework it a bit to make it much easier to extend the amount of FPS options we support. Signed-off-by:
-
