- 18 Mar, 2017 33 commits
-
-
Dan Williams authored
commit 86ef58a4 upstream. The interleave-set cookie is a sum that sanity checks the composition of an interleave set has not changed from when the namespace was initially created. The checksum is calculated by sorting the DIMMs by their location in the interleave-set. The comparison for the sort must be 64-bit wide, not byte-by-byte as performed by memcmp() in the broken case. Fix the implementation to accept correct cookie values in addition to the Linux "memcmp" order cookies, but only allow correct cookies to be generated going forward. It does mean that namespaces created by third-party-tooling, or created by newer kernels with this fix, will not validate on older kernels. However, there are a couple mitigating conditions: 1/ platforms with namespace-label capable NVDIMMs are not widely available. 2/ interleave-sets with a single-dimm are by definition not affected (nothing to sort). This covers the QEMU-KVM NVDIMM emulation case. The cookie stored in the namespace label will be fixed by any write the namespace label, the most straightforward way to achieve this is to write to the "alt_name" attribute of a namespace in sysfs. Fixes: eaf96153 ("libnvdimm, nfit: add interleave-set state-tracking infrastructure") Reported-by:
Nicholas Moulin <nicholas.w.moulin@linux.intel.com> Tested-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michael Holzheu authored
commit a4a81d8e upstream. In binutils/libbfd (bfd/elf.c) it is enforced that all s390 specific ELF notes like e.g. NT_S390_PREFIX or NT_S390_CTRS have "LINUX" specified as note name. Otherwise the notes are ignored. For /proc/vmcore we currently use "CORE" for these notes. Up to now this has not been a real problem because the dump analysis tool "crash" does not check the note name. But it will break all programs that use libbfd for processing ELF notes. So fix this and use "LINUX" for all s390 specific notes to comply with libbfd. Reported-by:
Philipp Rudo <prudo@linux.vnet.ibm.com> Reviewed-by:
Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Janosch Frank authored
commit 2e4d8800 upstream. While we can technically not run huge page guests right now, we can setup a guest with huge pages. Trying to migrate it will trigger a VM_BUG_ON and, if the kernel is not configured to panic on a BUG, it will happily try to work on non-existing page table entries. With this patch, we always return "dirty" if we encounter a large page when migrating. This at least fixes the immediate problem until we have proper handling for both kind of pages. Fixes: 15f36ebd ("KVM: s390: Add proper dirty bitmap support to S390 kvm.") Cc: <stable@vger.kernel.org> # 3.16+ Signed-off-by:
Janosch Frank <frankja@linux.vnet.ibm.com> Acked-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
-
Luis de Bethencourt authored
commit 7789cd39 upstream. Fix a smatch warning: drivers/scsi/mvsas/mv_sas.c:740 mvs_task_prep() warn: curly braces intended? The code is correct, the indention is misleading. When the device is not ready we want to return SAS_PHY_DOWN. But current indentation makes it look like we only do so in the else branch of if (mvi_dev). Signed-off-by:
Luis de Bethencourt <luisbg@osg.samsung.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Krzysztof Kozlowski authored
commit f98c7bce upstream. If DMA is not available (even when configured in DeviceTree), the driver will fail the startup procedure thus making serial console not available. For example this causes boot failure on QEMU ARMv7 (Exynos4210, SMDKC210): [ 1.302575] OF: amba_device_add() failed (-19) for /amba/pdma@12680000 ... [ 11.435732] samsung-uart 13800000.serial: DMA request failed [ 72.963893] samsung-uart 13800000.serial: DMA request failed [ 73.143361] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000000 DMA is not necessary for serial to work, so continue with UART startup after emitting a warning. Fixes: 62c37eed ("serial: samsung: add dma reqest/release functions") Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Johan Hovold authored
commit 654b404f upstream. Add missing sanity check to the bulk-in completion handler to avoid an integer underflow that can be triggered by a malicious device. This avoids leaking 128 kB of memory content from after the URB transfer buffer to user space. Fixes: 8c209e67 ("USB: make actual_length in struct urb field u32") Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Johan Hovold authored
commit 0b1d250a upstream. Fix a NULL-pointer dereference in the interrupt callback should a malicious device send data containing a bad port number by adding the missing sanity check. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Johan Hovold authored
commit de46e566 upstream. Make sure to verify that we have the required interrupt-out endpoint for IOWarrior56 devices to avoid dereferencing a NULL-pointer in write should a malicious device lack such an endpoint. Fixes: 946b960d ("USB: add driver for iowarrior devices.") Signed-off-by:
-
Johan Hovold authored
commit b7321e81 upstream. Make sure to check for the required interrupt-in endpoint to avoid dereferencing a NULL-pointer should a malicious device lack such an endpoint. Note that a fairly recent change purported to fix this issue, but added an insufficient test on the number of endpoints only, a test which can now be removed. Fixes: 4ec0ef3a ("USB: iowarrior: fix oops with malicious USB descriptors") Fixes: 946b960d ("USB: add driver for iowarrior devices.") Signed-off-by:
-
Johan Hovold authored
commit 30572418 upstream. This driver needlessly took another reference to the tty on open, a reference which was then never released on close. This lead to not just a leak of the tty, but also a driver reference leak that prevented the driver from being unloaded after a port had once been opened. Fixes: 4a90f09b ("tty: usb-serial krefs") Signed-off-by:
-
Johan Hovold authored
commit 8c76d7cd upstream. Add missing sanity check to the bulk-in completion handler to avoid an integer underflow that could be triggered by a malicious device. This avoids leaking up to 56 bytes from after the URB transfer buffer to user space. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Guenter Roeck authored
commit dcc7620c upstream. Upstream commit 98d74f9c ("xhci: fix 10 second timeout on removal of PCI hotpluggable xhci controllers") fixes a problem with hot pluggable PCI xhci controllers which can result in excessive timeouts, to the point where the system reports a deadlock. The same problem is seen with hot pluggable xhci controllers using the xhci-plat driver, such as the driver used for Type-C ports on rk3399. Similar to hot-pluggable PCI controllers, the driver for this chip removes the xhci controller from the system when the Type-C cable is disconnected. The solution for PCI devices works just as well for non-PCI devices and avoids the problem. Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Peter Chen authored
commit f95e60a7 upstream. According to xHCI spec, HCIVERSION containing a BCD encoding of the xHCI specification revision number, 0100h corresponds to xHCI version 1.0. Change "100" as "0x100". Cc: Lu Baolu <baolu.lu@linux.intel.com> Fixes: 04abb6de ("xhci: Read and parse new xhci 1.1 capability register") Signed-off-by:
Peter Chen <peter.chen@nxp.com> Signed-off-by:
-
Felipe Balbi authored
commit 2bfa0719 upstream. If we're dealing with SuperSpeed endpoints, we need to make sure to pass along the companion descriptor and initialize fields needed by the Gadget API. Eventually, f_fs.c should be converted to use config_ep_by_speed() like all other functions, though. Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Felipe Balbi authored
commit 7369090a upstream. Some gadget drivers are bad, bad boys. We notice that ADB was passing bad Burst Size which caused top bits of param0 to be overwritten which confused DWC3 when running this command. In order to avoid future issues, we're going to make sure values passed by macros are always safe for the controller. Note that ADB still needs a fix to *not* pass bad values. Reported-by:
Mohamed Abbas <mohamed.abbas@intel.com> Sugested-by:
Adam Andruszak <adam.andruszak@intel.com> Signed-off-by:
-
Peter Chen authored
commit 5bbc8526 upstream. When the user does device unbind and rebind test, the kernel will show below dump due to usb_gadget memory region is dirty after unbind. Clear usb_gadget region for every new probe. root@imx6qdlsolo:/sys/bus/platform/drivers/dummy_udc# echo dummy_udc.0 > bind [ 102.523312] kobject (eddd78b0): tried to init an initialized object, something is seriously wrong. [ 102.532447] CPU: 0 PID: 734 Comm: sh Not tainted 4.10.0-rc7-00872-g1b2b8e9 #1298 [ 102.539866] Hardware name: Freescale i.MX6 SoloX (Device Tree) [ 102.545717] Backtrace: [ 102.548225] [<c010d090>] (dump_backtrace) from [<c010d338>] (show_stack+0x18/0x1c) [ 102.555822] r7:ede34000 r6:60010013 r5:00000000 r4:c0f29418 [ 102.561512] [<c010d320>] (show_stack) from [<c040c2a4>] (dump_stack+0xb4/0xe8) [ 102.568764] [<c040c1f0>] (dump_stack) from [<c040e6d4>] (kobject_init+0x80/0x9c) [ 102.576187] r10:0000001f r9:eddd7000 r8:eeaf8c10 r7:eddd78a8 r6:c177891c r5:c0f3b060 [ 102.584036] r4:eddd78b0 r3:00000000 [ 102.587641] [<c040e654>] (kobject_init) from [<c05359a4>] (device_initialize+0x28/0xf8) [ 102.595665] r5:eebc4800 r4:eddd78a8 [ 102.599268] [<c053597c>] (device_initialize) from [<c05382ac>] (device_register+0x14/0x20) [ 102.607556] r7:eddd78a8 r6:00000000 r5:eebc4800 r4:eddd78a8 [ 102.613256] [<c0538298>] (device_register) from [<c0668ef4>] (usb_add_gadget_udc_release+0x8c/0x1ec) [ 102.622410] r5:eebc4800 r4:eddd7860 [ 102.626015] [<c0668e68>] (usb_add_gadget_udc_release) from [<c0669068>] (usb_add_gadget_udc+0x14/0x18) [ 102.635351] r10:0000001f r9:eddd7000 r8:eddd788c r7:bf003770 r6:eddd77f8 r5:eddd7818 [ 102.643198] r4:eddd785c r3:eddd7b24 [ 102.646834] [<c0669054>] (usb_add_gadget_udc) from [<bf003428>] (dummy_udc_probe+0x170/0x1c4 [dummy_hcd]) [ 102.656458] [<bf0032b8>] (dummy_udc_probe [dummy_hcd]) from [<c053d114>] (platform_drv_probe+0x54/0xb8) [ 102.665881] r10:00000008 r9:c1778960 r8:bf004128 r7:fffffdfb r6:bf004128 r5:eeaf8c10 [ 102.673727] r4:eeaf8c10 [ 102.676293] [<c053d0c0>] (platform_drv_probe) from [<c053b160>] (driver_probe_device+0x264/0x474) [ 102.685186] r7:00000000 r6:00000000 r5:c1778960 r4:eeaf8c10 [ 102.690876] [<c053aefc>] (driver_probe_device) from [<c05397c4>] (bind_store+0xb8/0x14c) [ 102.698994] r10:eeb3bb4c r9:ede34000 r8:0000000c r7:eeaf8c44 r6:bf004128 r5:c0f3b668 [ 102.706840] r4:eeaf8c10 [ 102.709402] [<c053970c>] (bind_store) from [<c0538ca8>] (drv_attr_store+0x28/0x34) [ 102.716998] r9:ede34000 r8:00000000 r7:ee3863c0 r6:ee3863c0 r5:c0538c80 r4:c053970c [ 102.724776] [<c0538c80>] (drv_attr_store) from [<c029c930>] (sysfs_kf_write+0x50/0x54) [ 102.732711] r5:c0538c80 r4:0000000c [ 102.736313] [<c029c8e0>] (sysfs_kf_write) from [<c029be84>] (kernfs_fop_write+0x100/0x214) [ 102.744599] r7:ee3863c0 r6:eeb3bb40 r5:00000000 r4:00000000 [ 102.750287] [<c029bd84>] (kernfs_fop_write) from [<c0222dd8>] (__vfs_write+0x34/0x120) [ 102.758231] r10:00000000 r9:ede34000 r8:c0108bc4 r7:0000000c r6:ede35f80 r5:c029bd84 [ 102.766077] r4:ee223780 [ 102.768638] [<c0222da4>] (__vfs_write) from [<c0224678>] (vfs_write+0xa8/0x170) [ 102.775974] r9:ede34000 r8:c0108bc4 r7:ede35f80 r6:01861cb0 r5:ee223780 r4:0000000c [ 102.783743] [<c02245d0>] (vfs_write) from [<c0225498>] (SyS_write+0x4c/0xa8) [ 102.790818] r9:ede34000 r8:c0108bc4 r7:0000000c r6:01861cb0 r5:ee223780 r4:ee223780 [ 102.798595] [<c022544c>] (SyS_write) from [<c0108a20>] (ret_fast_syscall+0x0/0x1c) [ 102.806188] r7:00000004 r6:b6e83d58 r5:01861cb0 r4:0000000c Fixes: 90fccb52 ("usb: gadget: Gadget directory cleanup - group UDC drivers") Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Xiaolong Ye <xiaolong.ye@intel.com> Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
-
Ravi Bangoria authored
commit e148bd17 upstream. emulate_step() uses a number of underlying kernel functions that were initially not enabled for LE. This has been rectified since. So, fix emulate_step() for LE for the corresponding instructions. Reported-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Rik van Riel authored
commit bf7165cf upstream. There are several trace include files that define TRACE_INCLUDE_FILE. Include several of them in the same .c file (as I currently have in some code I am working on), and the compile will blow up with a "warning: "TRACE_INCLUDE_FILE" redefined #define TRACE_INCLUDE_FILE syscalls" Every other include file in include/trace/events/ avoids that issue by having a #undef TRACE_INCLUDE_FILE before the #define; syscalls.h should have one, too. Link: http://lkml.kernel.org/r/20160928225554.13bd7ac6@annuminas.surriel.com Fixes: b8007ef7 ("tracing: Separate raw syscall from syscall tracer") Signed-off-by:
Rik van Riel <riel@redhat.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
James Hogan authored
commit 32eb6e8b upstream. A couple of netlogic assembly files define CP0_EBASE to $15, the same as CP0_PRID in mipsregs.h, and use it for accessing both CP0_PRId and CP0_EBase registers. However commit 609cf6f2 ("MIPS: CPS: Early debug using an ns16550-compatible UART") added a different definition of CP0_EBASE to mipsregs.h, which included a register select of 1. This causes harmless build warnings like the following: arch/mips/netlogic/common/reset.S:53:0: warning: "CP0_EBASE" redefined #define CP0_EBASE $15 ^ In file included from arch/mips/netlogic/common/reset.S:41:0: ./arch/mips/include/asm/mipsregs.h:63:0: note: this is the location of the previous definition #define CP0_EBASE $15, 1 ^ Update the code to use the definitions from mipsregs.h for accessing both registers. Fixes: 609cf6f2 ("MIPS: CPS: Early debug using an ns16550-compatible UART") Signed-off-by:
James Hogan <james.hogan@imgtec.com> Acked-by:
Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13183/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Ralf Baechle authored
commit 3021773c upstream. When expanding the la or dla pseudo-instruction in a delay slot the GNU assembler will complain should the pseudo-instruction expand to multiple actual instructions, since only the first of them will be in the delay slot leading to the pseudo-instruction being only partially executed if the branch is taken. Use of PTR_LA in the dec int-handler.S leads to such warnings: arch/mips/dec/int-handler.S: Assembler messages: arch/mips/dec/int-handler.S:149: Warning: macro instruction expanded into multiple instructions in a branch delay slot arch/mips/dec/int-handler.S:198: Warning: macro instruction expanded into multiple instructions in a branch delay slot Avoid this by open coding the PTR_LA macros. Signed-off-by:
-
Arnd Bergmann authored
commit 358c07fc upstream. A bugfix in v4.8-rc2 introduced a harmless warning when CONFIG_MEMCG_SWAP is disabled but CONFIG_MEMCG is enabled: mm/memcontrol.c:4085:27: error: 'mem_cgroup_id_get_online' defined but not used [-Werror=unused-function] static struct mem_cgroup *mem_cgroup_id_get_online(struct mem_cgroup *memcg) This moves the function inside of the #ifdef block that hides the calling function, to avoid the warning. Fixes: 1f47b61f ("mm: memcontrol: fix swap counter leak on swapout from offline cgroup") Link: http://lkml.kernel.org/r/20160824113733.2776701-1-arnd@arndb.deSigned-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Michal Hocko <mhocko@suse.com> Acked-by:
Vladimir Davydov <vdavydov@virtuozzo.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Arnd Bergmann authored
commit d43e6fb4 upstream. The #warning was present 10 years ago when the driver first got merged. As the platform is rather obsolete by now, it seems very unlikely that the warning will cause anyone to fix the code properly. kernelci.org reports the warning for every build in the meantime, so I think it's better to just turn it into a code comment to reduce noise. Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Arnd Bergmann authored
commit 886f9c69 upstream. All pointers to these functions were removed, so now they produce warnings: arch/mips/ralink/rt305x.c:92:13: error: 'rt305x_wdt_reset' defined but not used [-Werror=unused-function] This removes the functions. If we need them again, the patch can be reverted later. Fixes: f576fb6a ("MIPS: ralink: cleanup the soc specific pinmux data") Signed-off-by:
-
John Crispin authored
commit 9c48568b upstream. Over the years the code has been changed various times leading to argc/argv being defined in a different function to where we actually use the variables. Clean this up by moving them to prom_init_cmdline(). Signed-off-by:
John Crispin <john@phrozen.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14902/Signed-off-by:
-
Arnd Bergmann authored
commit 906b2684 upstream. kernelci.org reports a warning for this driver, as it copies a local variable into a 'const char *' string: drivers/mtd/maps/pmcmsp-flash.c:149:30: warning: passing argument 1 of 'strncpy' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] Using kstrndup() simplifies the code and avoids the warning. Signed-off-by:
Marek Vasut <marek.vasut@gmail.com> Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Signed-off-by:
-
Arnd Bergmann authored
commit b3f60461 upstream. Since linux-4.8, CPU_FREQ_STAT is a bool symbol, causing a warning in kernelci.org: arch/mips/configs/lemote2f_defconfig:42:warning: symbol value 'm' invalid for CPU_FREQ_STAT This updates the defconfig to have the feature built-in. Fixes: 1aefc75b ("cpufreq: stats: Make the stats code non-modular") Signed-off-by:
-
Arnd Bergmann authored
commit 23ca9b52 upstream. kernelci reports a failure of the ip28_defconfig build after upgrading its gcc version: arch/mips/sgi-ip22/Platform:29: *** gcc doesn't support needed option -mr10k-cache-barrier=store. Stop. The problem apparently is that the -mr10k-cache-barrier=store option is now rejected for CPUs other than r10k. Explicitly including the CPU in the check fixes this and is safe because both options were introduced in gcc-4.4. Signed-off-by:
-
Arnd Bergmann authored
commit ea58fca1 upstream. Since linux-4.3, SCSI_DH is a bool symbol, causing a warning in kernelci.org: arch/mips/configs/ip27_defconfig:136:warning: symbol value 'm' invalid for SCSI_DH This updates the defconfig to have the feature built-in. Fixes: 086b91d0 ("scsi_dh: integrate into the core SCSI code") Signed-off-by:
-
Arnd Bergmann authored
commit b6176494 upstream. One of the last remaining failures in kernelci.org is for a gcc bug: drivers/net/ethernet/qlogic/qlge/qlge_main.c:4819:1: error: insn does not satisfy its constraints: drivers/net/ethernet/qlogic/qlge/qlge_main.c:4819:1: internal compiler error: in extract_constrain_insn, at recog.c:2190 This is apparently broken in gcc-6 but fixed in gcc-7, and I cannot reproduce the problem here. However, it is clear that ip27_defconfig does not actually need this driver as the platform has only PCI-X but not PCIe, and the qlge adapter in turn is PCIe-only. The driver was originally enabled in 2010 along with lots of other drivers. Fixes: 59d302b3 ("MIPS: IP27: Make defconfig useful again.") Signed-off-by:
-
Arnd Bergmann authored
commit 9ddc16ad upstream. In linux-4.10-rc, NF_CT_PROTO_UDPLITE and NF_CT_PROTO_DCCP are bool symbols instead of tristate, and kernelci.org reports a bunch of warnings for this, like: arch/mips/configs/malta_kvm_guest_defconfig:63:warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE arch/mips/configs/malta_defconfig:62:warning: symbol value 'm' invalid for NF_CT_PROTO_DCCP arch/mips/configs/malta_defconfig:63:warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE arch/mips/configs/ip22_defconfig:70:warning: symbol value 'm' invalid for NF_CT_PROTO_DCCP arch/mips/configs/ip22_defconfig:71:warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE This changes all the MIPS defconfigs with these symbols to have them built-in. Fixes: 9b91c96c ("netfilter: conntrack: built-in support for UDPlite") Fixes: c51d3901 ("netfilter: conntrack: built-in support for DCCP") Signed-off-by:
-
Arnd Bergmann authored
commit 7d6e9105 upstream. An ancient gcc bug (first reported in 2003) has apparently resurfaced on MIPS, where kernelci.org reports an overly large stack frame in the whirlpool hash algorithm: crypto/wp512.c:987:1: warning: the frame size of 1112 bytes is larger than 1024 bytes [-Wframe-larger-than=] With some testing in different configurations, I'm seeing large variations in stack frames size up to 1500 bytes for what should have around 300 bytes at most. I also checked the reference implementation, which is essentially the same code but also comes with some test and benchmarking infrastructure. It seems that recent compiler versions on at least arm, arm64 and powerpc have a partial fix for this problem, but enabling "-fsched-pressure", but even with that fix they suffer from the issue to a certain degree. Some testing on arm64 shows that the time needed to hash a given amount of data is roughly proportional to the stack frame size here, which makes sense given that the wp512 implementation is doing lots of loads for table lookups, and the problem with the overly large stack is a result of doing a lot more loads and stores for spilled registers (as seen from inspecting the object code). Disabling -fschedule-insns consistently fixes the problem for wp512, in my collection of cross-compilers, the results are consistently better or identical when comparing the stack sizes in this function, though some architectures (notable x86) have schedule-insns disabled by default. The four columns are: default: -O2 press: -O2 -fsched-pressure nopress: -O2 -fschedule-insns -fno-sched-pressure nosched: -O2 -no-schedule-insns (disables sched-pressure) default press nopress nosched alpha-linux-gcc-4.9.3 1136 848 1136 176 am33_2.0-linux-gcc-4.9.3 2100 2076 2100 2104 arm-linux-gnueabi-gcc-4.9.3 848 848 1048 352 cris-linux-gcc-4.9.3 272 272 272 272 frv-linux-gcc-4.9.3 1128 1000 1128 280 hppa64-linux-gcc-4.9.3 1128 336 1128 184 hppa-linux-gcc-4.9.3 644 308 644 276 i386-linux-gcc-4.9.3 352 352 352 352 m32r-linux-gcc-4.9.3 720 656 720 268 microblaze-linux-gcc-4.9.3 1108 604 1108 256 mips64-linux-gcc-4.9.3 1328 592 1328 208 mips-linux-gcc-4.9.3 1096 624 1096 240 powerpc64-linux-gcc-4.9.3 1088 432 1088 160 powerpc-linux-gcc-4.9.3 1080 584 1080 224 s390-linux-gcc-4.9.3 456 456 624 360 sh3-linux-gcc-4.9.3 292 292 292 292 sparc64-linux-gcc-4.9.3 992 240 992 208 sparc-linux-gcc-4.9.3 680 592 680 312 x86_64-linux-gcc-4.9.3 224 240 272 224 xtensa-linux-gcc-4.9.3 1152 704 1152 304 aarch64-linux-gcc-7.0.0 224 224 1104 208 arm-linux-gnueabi-gcc-7.0.1 824 824 1048 352 mips-linux-gcc-7.0.0 1120 648 1120 272 x86_64-linux-gcc-7.0.1 240 240 304 240 arm-linux-gnueabi-gcc-4.4.7 840 392 arm-linux-gnueabi-gcc-4.5.4 784 728 784 320 arm-linux-gnueabi-gcc-4.6.4 736 728 736 304 arm-linux-gnueabi-gcc-4.7.4 944 784 944 352 arm-linux-gnueabi-gcc-4.8.5 464 464 760 352 arm-linux-gnueabi-gcc-4.9.3 848 848 1048 352 arm-linux-gnueabi-gcc-5.3.1 824 824 1064 336 arm-linux-gnueabi-gcc-6.1.1 808 808 1056 344 arm-linux-gnueabi-gcc-7.0.1 824 824 1048 352 Trying the same test for serpent-generic, the picture is a bit different, and while -fno-schedule-insns is generally better here than the default, -fsched-pressure wins overall, so I picked that instead. default press nopress nosched alpha-linux-gcc-4.9.3 1392 864 1392 960 am33_2.0-linux-gcc-4.9.3 536 524 536 528 arm-linux-gnueabi-gcc-4.9.3 552 552 776 536 cris-linux-gcc-4.9.3 528 528 528 528 frv-linux-gcc-4.9.3 536 400 536 504 hppa64-linux-gcc-4.9.3 524 208 524 480 hppa-linux-gcc-4.9.3 768 472 768 508 i386-linux-gcc-4.9.3 564 564 564 564 m32r-linux-gcc-4.9.3 712 576 712 532 microblaze-linux-gcc-4.9.3 724 392 724 512 mips64-linux-gcc-4.9.3 720 384 720 496 mips-linux-gcc-4.9.3 728 384 728 496 powerpc64-linux-gcc-4.9.3 704 304 704 480 powerpc-linux-gcc-4.9.3 704 296 704 480 s390-linux-gcc-4.9.3 560 560 592 536 sh3-linux-gcc-4.9.3 540 540 540 540 sparc64-linux-gcc-4.9.3 544 352 544 496 sparc-linux-gcc-4.9.3 544 344 544 496 x86_64-linux-gcc-4.9.3 528 536 576 528 xtensa-linux-gcc-4.9.3 752 544 752 544 aarch64-linux-gcc-7.0.0 432 432 656 480 arm-linux-gnueabi-gcc-7.0.1 616 616 808 536 mips-linux-gcc-7.0.0 720 464 720 488 x86_64-linux-gcc-7.0.1 536 528 600 536 arm-linux-gnueabi-gcc-4.4.7 592 440 arm-linux-gnueabi-gcc-4.5.4 776 448 776 544 arm-linux-gnueabi-gcc-4.6.4 776 448 776 544 arm-linux-gnueabi-gcc-4.7.4 768 448 768 544 arm-linux-gnueabi-gcc-4.8.5 488 488 776 544 arm-linux-gnueabi-gcc-4.9.3 552 552 776 536 arm-linux-gnueabi-gcc-5.3.1 552 552 776 536 arm-linux-gnueabi-gcc-6.1.1 560 560 776 536 arm-linux-gnueabi-gcc-7.0.1 616 616 808 536 I did not do any runtime tests with serpent, so it is possible that stack frame size does not directly correlate with runtime performance here and it actually makes things worse, but it's more likely to help here, and the reduced stack frame size is probably enough reason to apply the patch, especially given that the crypto code is often used in deep call chains. Link: https://kernelci.org/build/id/58797d7559b5149efdf6c3a9/logs/ Link: http://www.larc.usp.br/~pbarreto/WhirlpoolPage.html Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=11488 Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=79149 Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Johan Hovold authored
commit 2e46565c upstream. A recent change claimed to fix an off-by-one error in the OOB-port completion handler, but instead introduced such an error. This could specifically led to modem-status changes going unnoticed, effectively breaking TIOCMGET. Note that the offending commit fixes a loop-condition underflow and is marked for stable, but should not be backported without this fix. Reported-by:
Ben Hutchings <ben@decadent.org.uk> Fixes: 2d380889 ("USB: serial: digi_acceleport: fix OOB data sanity check") Signed-off-by:
-
Johan Hovold authored
commit 2d380889 upstream. Make sure to check for short transfers to avoid underflow in a loop condition when parsing the receive buffer. Also fix an off-by-one error in the incomplete sanity check which could lead to invalid data being parsed. Fixes: 8c209e67 ("USB: make actual_length in struct urb field u32") Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reviewed-by:
-
- 15 Mar, 2017 7 commits
-
-
Greg Kroah-Hartman authored
-
K. Y. Srinivasan authored
commit 372b1e91 upstream. The hypercall page only needs to be executable but currently it is setup to be writable as well. Fix the issue. Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Acked-by:
Kees Cook <keescook@chromium.org> Reported-by:
Stephen Hemminger <stephen@networkplumber.org> Tested-by:
-
OGAWA Hirofumi authored
commit c0d0e351 upstream. Recently fallocate patch was merged and it uses MSDOS_I(inode)->mmu_private at fat_evict_inode(). However, fat_inode/fsinfo_inode that was introduced in past didn't initialize MSDOS_I(inode) properly. With those combinations, it became the cause of accessing random entry in FAT area. Link: http://lkml.kernel.org/r/87pohrj4i8.fsf@mail.parknet.co.jpSigned-off-by:
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Reported-by:
Moreno Bartalucci <moreno.bartalucci@tecnorama.it> Tested-by:
-
Arnd Bergmann authored
commit d24cdcd3 upstream. I ran into this compile warning, which is the result of BUG_ON(1) not always leading to the compiler treating the code path as unreachable: include/linux/ceph/osdmap.h: In function 'ceph_can_shift_osds': include/linux/ceph/osdmap.h:62:1: error: control reaches end of non-void function [-Werror=return-type] Using BUG() here avoids the warning. Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by:
-
Hans de Goede authored
commit bb98e72a upstream. On my Cherrytrail CUBE iwork8 Air tablet PIPE-A would get stuck on loading i915 at boot 1 out of every 3 boots, resulting in a non functional LCD. Once the i915 driver has successfully loaded, the panel can be disabled / enabled without hitting this issue. The getting stuck is caused by vlv_init_display_clock_gating() clearing the DPOUNIT_CLOCK_GATE_DISABLE bit in DSPCLK_GATE_D when called from chv_pipe_power_well_ops.enable() on driver load, while a pipe is enabled driving the DSI LCD by the BIOS. Clearing this bit while DSI is in use is a known issue and intel_dsi_pre_enable() / intel_dsi_post_disable() already set / clear it as appropriate. This commit modifies vlv_init_display_clock_gating() to leave the DPOUNIT_CLOCK_GATE_DISABLE bit alone fixing the pipe getting stuck. Changes in v2: -Replace PIPE-A with "a pipe" or "the pipe" in the commit msg and comment Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97330Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161202142904.25613-1-hdegoede@redhat.comSigned-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
River Zhou <riverzhou2000@163.com> Signed-off-by:
-
Alexander Aring authored
commit bdca1fd9 upstream. This patch changes the spinlock to mutex for the available fakelb phy list. When holding the spinlock the ieee802154_unregister_hw is called which holding the rtnl_mutex, in that case we get a "BUG: sleeping function called from invalid context" error. We simple change the spinlock to mutex which allows to hold the rtnl lock there. Signed-off-by:
Alexander Aring <aar@pengutronix.de> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Dan Carpenter authored
commit f9ad86e4 upstream. Having "ret" be a bool type works for everything except ret = funcs->atomic_check(). The other functions all return zero on error but ->atomic_check() returns negative error codes. We want to propagate the error code but instead we return 1. I found this bug with static analysis and I don't know if it affects run time. Fixes: 4cd4df80 ("drm/atomic: Add ->atomic_check() to encoder helpers") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170207234601.GA23981@mwandaSigned-off-by:
-
