- 24 Feb, 2020 25 commits
-
-
Diego Elio Pettenò authored
This kernel configuration is basically enabling/disabling sr driver quirks detection. While these quirks are for fairly rare devices (very old CD burners, and a glucometer), the additional detection of these models is a very minimal amount of code. The logic behind the quirks is always built into the sr driver. This also removes the config from all the defconfig files that are enabling this already. Link: https://lore.kernel.org/r/20200223191144.726-1-flameeyes@flameeyes.comReviewed-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
Diego Elio Pettenò <flameeyes@flameeyes.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Hannes Reinecke authored
ch_mutex() was introduced with a mechanical conversion, but as we now have correct locking we can remove it altogether. Link: https://lore.kernel.org/r/20200213153207.123357-4-hare@suse.deReviewed-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
-
Hannes Reinecke authored
The 'ch' device node is created before the configuration is being read in, which leads to a race window when ch_open() is called before that. To avoid any races we should be taking the device mutex during ch_readconfig() and ch_init_elem(), and also during ch_open(). That ensures ch_probe is finished before ch_open() completes. Link: https://lore.kernel.org/r/20200213153207.123357-3-hare@suse.deReviewed-by:
-
Hannes Reinecke authored
The SCSI device is required to be present during ch_probe() and ch_open(). But the SCSI device itself is only checked during ch_open(), so it's anyones guess if it had been present during ch_probe(). And consequently we can't reliably detach it during ch_release(), as ch_remove() might have been called first. So initialize the changer device during ch_probe(), and take a reference to the SCSI device during both ch_probe() and ch_open(). [mkp: fixed checkpatch warning] Link: https://lore.kernel.org/r/20200213153207.123357-2-hare@suse.deReviewed-by:
-
Himanshu Madhani authored
Link: https://lore.kernel.org/r/20200212214436.25532-26-hmadhani@marvell.comSigned-off-by:
Himanshu Madhani <hmadhani@marvell.com> Signed-off-by:
-
Himanshu Madhani authored
This patch uses QLA_FW_STOPPED macro so that flag is propogated to all the QPairs. Link: https://lore.kernel.org/r/20200212214436.25532-25-hmadhani@marvell.comSigned-off-by:
-
Himanshu Madhani authored
This patch fixes: - qla2x00_issue_iocb_timeout will now return if chip is down - only check for sp->qpair in abort handling Link: https://lore.kernel.org/r/20200212214436.25532-24-hmadhani@marvell.comSigned-off-by:
-
Himanshu Madhani authored
This patch fixes control flag options for login/logout IOCB. Link: https://lore.kernel.org/r/20200212214436.25532-23-hmadhani@marvell.comSigned-off-by:
-
Himanshu Madhani authored
Add missing rscn_gen when creating new fcport. Link: https://lore.kernel.org/r/20200212214436.25532-22-hmadhani@marvell.comSigned-off-by:
-
Quinn Tran authored
For ISP28xx, use 28xx call to retrieve active FW region. Link: https://lore.kernel.org/r/20200212214436.25532-21-hmadhani@marvell.comSigned-off-by:
Quinn Tran <qutran@marvell.com> Signed-off-by:
-
Joe Carnuccio authored
Add port name in the messages file to help debugging of Login/Logout IOCBs Link: https://lore.kernel.org/r/20200212214436.25532-20-hmadhani@marvell.comSigned-off-by:
Joe Carnuccio <joe.carnuccio@cavium.com> Signed-off-by:
-
Joe Carnuccio authored
Ths patch fixes MBX in-direction for setting right bits for qla2x00_echo_test() Link: https://lore.kernel.org/r/20200212214436.25532-19-hmadhani@marvell.comSigned-off-by:
-
Joe Carnuccio authored
This fixes loopback and echo test options. Link: https://lore.kernel.org/r/20200212214436.25532-18-hmadhani@marvell.comSigned-off-by:
-
Joe Carnuccio authored
This takes care of big endian architectures. Link: https://lore.kernel.org/r/20200212214436.25532-17-hmadhani@marvell.comSigned-off-by:
-
Himanshu Madhani authored
This patch fixes RDP length in case when driver needs to reduce length of RDP response Link: https://lore.kernel.org/r/20200212214436.25532-16-hmadhani@marvell.comSigned-off-by:
-
Joe Carnuccio authored
This patch reduces RDP response payload length, if requesting port is a domain controller (sid 0xfffc01) and fw is earlier than 8.09.00 and fw is not 8.05.65 then limit the RDP response payload length to maximum of 256 bytes by terminating the response just before the optical element descriptor. Link: https://lore.kernel.org/r/20200212214436.25532-15-hmadhani@marvell.comSigned-off-by:
-
Joe Carnuccio authored
This patch adds deferred queue for processing aborts and RDP in the driver. Link: https://lore.kernel.org/r/20200212214436.25532-14-hmadhani@marvell.comSigned-off-by:
-
Joe Carnuccio authored
This patch does the following to improve RDP processing: - Rename field port_id to d_id in ELS and PUREX iocb structs to match FW spec. - Remove redundant comments from ELS and PUREX iocb structs. - Refactor fields in ELS iocb struct for error subcode common access. - Properly use error subcode fields in rdp processing routine. - Add print logs for alloc failure in purex rdp processing routine. Link: https://lore.kernel.org/r/20200212214436.25532-13-hmadhani@marvell.comSigned-off-by:
-
Himanshu Madhani authored
This patch correctly displays port speed capability and current speed for RDP command. Link: https://lore.kernel.org/r/20200212214436.25532-12-hmadhani@marvell.comSigned-off-by:
-
Himanshu Madhani authored
During Link up phase and Data rate MBX command response, print message indicating FCE is enabled. Link: https://lore.kernel.org/r/20200212214436.25532-11-hmadhani@marvell.comSigned-off-by:
-
Joe Carnuccio authored
This patch adds support for extended FDMI commands and cleans up code to reduce duplication. Link: https://lore.kernel.org/r/20200212214436.25532-10-hmadhani@marvell.comSigned-off-by:
Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by:
-
Joe Carnuccio authored
This patch provides separate module parameter ql2xrdpenable to turn on/off RDP capability in the driver. However, if ql2xsmartsan parameter is enabled, it will also turn on ql2xfdmienable parameter since it is required for RDP to work. Link: https://lore.kernel.org/r/20200212214436.25532-9-hmadhani@marvell.comSigned-off-by:
-
Joe Carnuccio authored
This patch adds RDP command support in the driver. With the help of new ql2xsmartsan parameter, driver will use PUREX IOCB mode to send RDP command to switch and will be able to receive various diagnostic data. Link: https://lore.kernel.org/r/20200212214436.25532-8-hmadhani@marvell.comSigned-off-by:
-
Joe Carnuccio authored
This patch prepares code for implementing Vendor specific extended FDMI/RDP commands. It also addes support for MBC_GET_PORT_DATABASE and MBC_GET_RNID_PARAMS commands. Link: https://lore.kernel.org/r/20200212214436.25532-7-hmadhani@marvell.comSigned-off-by:
-
Joe Carnuccio authored
This patch fixes endian warning for fc_host_stats. Link: https://lore.kernel.org/r/20200212214436.25532-6-hmadhani@marvell.comSigned-off-by:
-
- 21 Feb, 2020 6 commits
-
-
Joe Carnuccio authored
This patch adds sysfs node to show D-Port diag data. Link: https://lore.kernel.org/r/20200212214436.25532-4-hmadhani@marvell.comSigned-off-by:
-
Joe Carnuccio authored
This patch moves freeing of fcport out of interrupt context. Link: https://lore.kernel.org/r/20200212214436.25532-3-hmadhani@marvell.comSigned-off-by:
-
Joe Carnuccio authored
This patch provides an interface to do the following (using MBC 0x3B): - Displays (in hex) the LED config words for all three LEDs. - Programs the config words for one LED or for all three LEDs. The sysfs node defined is named beacon_config. First, to allow driver to gain LED control, do this: # echo 1 > /sys/class/scsi_host/host#/beacon Then, to display config words for all three LEDs do this: # cat /sys/class/scsi_host/host#/beacon_config To set config words for all three LEDs do this: # echo 3 xxxx yyyy zzzz > /sys/class/scsi_host/host#/beacon_config Or, to set config word for a specific single LED n do this: # echo n xxxx > /sys/class/scsi_host/host#/beacon_config where n is the LED number (0, 1, 2) Finally, to restore LED control back to firmware, do this: # echo 0 > /sys/class/scsi_host/host#/beacon Link: https://lore.kernel.org/r/20200212214436.25532-2-hmadhani@marvell.comSigned-off-by:
-
David Disseldorp authored
The emulate_ua_intlck_ctrl device attribute accepts values of 0, 1 or 2 via ConfigFS, which map to unit attention interlocks control codes in the MODE SENSE control Mode Page. Use an enum to track these values so that it's clear that, unlike the remaining emulate_X attributes, emulate_ua_intlck_ctrl isn't boolean. Link: https://marc.info/?l=target-devel&m=158227825428798Suggested-by:
David Disseldorp <ddiss@suse.de> Signed-off-by:
-
David Disseldorp authored
This should harden us against configfs API regressions similar to the one fixed by the previous commit. Link: https://marc.info/?l=target-devel&m=158211731505174Signed-off-by:
-
David Disseldorp authored
The LIO unmap_zeroes_data device attribute is mapped to the LBPRZ flag in the READ CAPACITY(16) and Thin Provisioning VPD INQUIRY responses. The unmap_zeroes_data attribute is exposed via configfs, where any write value is correctly validated via strtobool(). However, when initialised via target_configure_unmap_from_queue() it takes the value of the device's max_write_zeroes_sectors queue limit, which is non-boolean. A non-boolean value can be read from configfs, but attempting to write the same value back results in -EINVAL, causing problems for configuration utilities such as targetcli. Link: https://marc.info/?l=target-devel&m=158213354011309 Fixes: 2237498f ("target/iblock: Convert WRITE_SAME to blkdev_issue_zeroout") Reviewed-by:
-
- 18 Feb, 2020 3 commits
-
-
Gustavo A. R. Silva authored
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732 ("cxgb3/l2t: Fix undefined behaviour") Link: https://lore.kernel.org/r/20200213000211.GA23171@embeddedor.comReviewed-by:Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
James Smart authored
This patch modifies lpfc to register for Link Integrity events via the use of an RDF ELS and to perform Link Integrity FPIN logging. Specifically, the driver was modified to: - Format and issue the RDF ELS immediately following SCR registration. This registers the ability of the driver to receive FPIN ELS. - Adds decoding of the FPIN els into the received descriptors, with logging of the Link Integrity event information. After decoding, the ELS is delivered to the scsi fc transport to be delivered to any user-space applications. - To aid in logging, simple helpers were added to create enum to name string lookup functions that utilize the initialization helpers from the fc_els.h header. - Note: base header definitions for the ELS's don't populate the descriptor payloads. As such, lpfc creates it's own version of the structures, using the base definitions (mostly headers) and additionally declaring the descriptors that will complete the population of the ELS. Link: https://lore.kernel.org/r/20200210173155.547-3-jsmart2021@gmail.comSigned-off-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
James Smart <jsmart2021@gmail.com> Signed-off-by:
-
James Smart authored
Update the FC headers for the RDF ELS and populate out the FPIN ELS and the Link integrity FPIN payload. RDF is used to register for diagnostic events. FPIN is how the fabric reports a diagnostic event. Specifically, this patch: - Adds the formal definition of TLV descriptors that are now used in a lot of the FC spec. The simplistic fc_fn_desc structure, basically no more than the tlv definition, is removed. - Small tlv helper functions are added as defines. - The list of known Descriptor tags (identifying the TLV) is expanded and a name initializer introduced. - The LSRI descriptor, returned in many new ELS response payloads is added. - The RDF ELS code is added, and the RDF request response structures added. - The FPIN els definition is corrected. - A full definition of a Link Integrity Notification descriptor is added, [mkp: rolled in kbuild warning fix] Link: https://lore.kernel.org/r/20200210173155.547-2-jsmart2021@gmail.comReported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
-
- 13 Feb, 2020 6 commits
-
-
John Garry authored
Module param scsi_use_blk_mq has not been referenced for some time, so zap it. Link: https://lore.kernel.org/r/1581355992-139274-1-git-send-email-john.garry@huawei.comSigned-off-by:
John Garry <john.garry@huawei.com> Signed-off-by:
-
Geert Uytterhoeven authored
Restore alignment of the continuations of the ioremap() calls in zorro_esp_probe(). Join lines where all parameters can fit on a single line. Link: https://lore.kernel.org/r/20200212085138.10009-1-geert+renesas@glider.be Fixes: 4bdc0d67 ("remove ioremap_nocache and devm_ioremap_nocache") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Can Guo authored
After enter hibern8, as UFS JEDEC ver 3.0 requires, a specific gating wait time is required before disable the device reference clock. If it is not specified, use the old delay. Link: https://lore.kernel.org/r/1581392451-28743-8-git-send-email-cang@codeaurora.orgReviewed-by:
Asutosh Das <asutoshd@codeaurora.org> Reviewed-by:
Hongwu Su <hongwus@codeaurora.org> Signed-off-by:
Can Guo <cang@codeaurora.org> Signed-off-by:
-
Can Guo authored
In UFS version 3.0, a newly added attribute bRefClkGatingWaitTime defines the minimum time for which the reference clock is required by device during transition to LS-MODE or HIBERN8 state. Make this change to reflect the new requirement by adding delays before turning off the clock. Link: https://lore.kernel.org/r/1581392451-28743-7-git-send-email-cang@codeaurora.orgReviewed-by:
Bean Huo <beanhuo@micron.com> Reviewed-by:
Stanley Chu <stanley.chu@mediatek.com> Signed-off-by:
-
Can Guo authored
The async version of ufshcd_hold(async == true), which is only called in queuecommand path as for now, is expected to work in atomic context, thus it should not sleep or schedule out. When it runs into the condition that clocks are ON but link is still in hibern8 state, it should bail out without flushing the clock ungate work. Fixes: f2a785ac ("scsi: ufshcd: Fix race between clk scaling and ungate work") Link: https://lore.kernel.org/r/1581392451-28743-6-git-send-email-cang@codeaurora.orgReviewed-by:
-
Can Guo authored
The functionality of vendor specific ops should be handled properly in platform specific driver, but should not count on the UFS driver. Link: https://lore.kernel.org/r/1581392451-28743-5-git-send-email-cang@codeaurora.orgReviewed-by:
-
