- 19 Oct, 2013 1 commit
-
-
Thomas Pugliese authored
This patch serializes access to the HWA data transfer out (DTO) endpoint. This prevents a situation where two transfer requests being sent concurrently to separate downstream endpoints could interleave their transfer request and transfer data packets causing data corruption. The transfer processing code will now attempt to acquire the DTO resource before sending a transfer to the HWA. If it cannot acquire the resource, the RPIPE that the transfer is assigned to will be placed on a waiting list. When the DTO resource is released, the actor releasing the resource will serivce the RPIPEs that are waiting. Signed-off-by:
Thomas Pugliese <thomas.pugliese@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 16 Oct, 2013 10 commits
-
-
Jingoo Han authored
Use the generic PHY API to control the DP PHY. Signed-off-by:
Jingoo Han <jg1.han@samsung.com> Reviewed-by:
Tomasz Figa <t.figa@samsung.com> Signed-off-by:
Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
-
Jingoo Han authored
Exynos Display Port can be used only for Exynos SoCs. In addition, non-DT for EXYNOS SoCs is not supported from v3.11; thus, there is no need to support non-DT for Exynos Display Port. The 'include/video/exynos_dp.h' file has been used for non-DT support and the content of file include/video/exynos_dp.h is moved to drivers/video/exynos/exynos_dp_core.h. Thus, the 'exynos_dp.h' file is removed. Also, 'struct exynos_dp_platdata' is removed, because it is not used any more. Signed-off-by:
-
Jingoo Han authored
Add a PHY provider driver for the Samsung Exynos SoC Display Port PHY. Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Sylwester Nawrocki authored
Generic PHY drivers are used to handle the MIPI CSIS and MIPI DSIM DPHYs so we can remove now unused code at arch/arm/plat-samsung. In case there is any board file for S5PV210 platforms using MIPI CSIS/DSIM (not any upstream currently) it should use the generic PHY API to bind the PHYs to respective PHY consumer drivers and a platform device for the PHY provider should be defined. Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Acked-by:
Kukjin Kim <kgene.kim@samsung.com> Signed-off-by:
-
Sylwester Nawrocki authored
Use the generic PHY API instead of the platform callback for the MIPI DSIM DPHY enable/reset control. Signed-off-by:
Donghwa Lee <dh09.lee@samsung.com> Acked-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
-
Sylwester Nawrocki authored
Use the generic PHY API instead of the platform callback to control the MIPI CSIS DPHY. Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by:
-
Sylwester Nawrocki authored
Add a PHY provider driver for the Samsung S5P/Exynos SoC MIPI CSI-2 receiver and MIPI DSI transmitter DPHYs. Signed-off-by:
-
Julius Werner authored
This patch adds the Port Reset Change flag to the set of bits that are preemptively cleared on init/resume of a hub. In theory this bit should never be set unexpectedly... in practice it can still happen if BIOS, SMM or ACPI code plays around with USB devices without cleaning up correctly. This is especially dangerous for XHCI root hubs, which don't generate any more Port Status Change Events until all change bits are cleared, so this is a good precaution to have (similar to how it's already done for the Warm Port Reset Change flag). Signed-off-by:
Julius Werner <jwerner@chromium.org> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Matthias Beyer authored
Replaced spaces by tabs for proc_control_compat() function. Signed-off-by:
Matthias Beyer <mail@beyermatthias.de> Signed-off-by:
-
Matthias Beyer authored
Replaced spaces by tabs for proc_reapurbnonblock() function. Signed-off-by:
-
- 14 Oct, 2013 11 commits
-
-
Jingoo Han authored
The non-DT for EXYNOS SoCs is not supported from v3.11. Thus, there is no need to support non-DT for Exynos OHCI driver. The 'include/linux/platform_data/usb-ohci-exynos.h' file has been used for non-DT support. Thus, the 'usb-ohci-exynos.h' file can be removed. Signed-off-by:
-
Michael Opdenacker authored
Remove the use of local_irq_save() and IRQF_DISABLED, no longer needed since interrupt handlers are always run with interrupts disabled on the current CPU. Tested successfully with 3.12.0-rc4 on my PC. Didn't find any issue because of this change. Signed-off-by:
Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by:
-
Alan Stern authored
This patch changes the initial delay before the startup of a newly scheduled isochronous stream. Currently the stream doesn't start for at least 5 ms (40 microframes). This value is just an estimate; it has no real justification. Instead, we can start the stream as soon as possible after the scheduling computations are complete. Essentially this requires nothing more than reading the frame counter after the stream is scheduled, instead of before. Signed-off-by:
-
Alan Stern authored
This patch continues the scheduling changes in ehci-hcd by adding a table to store the bandwidth allocation below each TT. This will speed up the scheduling code, as it will no longer need to read through the entire schedule to compute the bandwidth currently in use. Properly speaking, the FS/LS budget calculations should be done in terms of full-speed bytes per microframe, as described in the USB-2 spec. However the driver currently uses microseconds per microframe, and the scheduling code isn't robust enough at this point to change over. For the time being, we leave the calculations as they are. Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit 476e4bf9. Manjunath is no longer at Linaro, the email address bounces. Given that, and the fact that others have reported problems with these patches, I'm reverting them until someone from Linaro who can SUPPORT THEM submits them. I will no longer accept patches from linaro.com developers unless a senior Linaro developer has signed off on them, which did not happen with this patch set. Reported-by:
Olof Johansson <olof@lixom.net> Cc: Manjunath Goudar <manjunath.goudar@linaro.org> Cc: Manjunath Goudar <csmanjuvijay@gmail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Arnd Bergmann <arnd@arndb.de>
-
Greg Kroah-Hartman authored
This reverts commit 056ca85d. Manjunath is no longer at Linaro, the email address bounces. Given that, and the fact that others have reported problems with these patches, I'm reverting them until someone from Linaro who can SUPPORT THEM submits them. I will no longer accept patches from linaro.com developers unless a senior Linaro developer has signed off on them, which did not happen with this patch set. Reported-by:
-
Greg Kroah-Hartman authored
This reverts commit 19d33943. Manjunath is no longer at Linaro, the email address bounces. Given that, and the fact that others have reported problems with these patches, I'm reverting them until someone from Linaro who can SUPPORT THEM submits them. I will no longer accept patches from linaro.com developers unless a senior Linaro developer has signed off on them, which did not happen with this patch set. Reported-by:
-
Greg Kroah-Hartman authored
This reverts commit 86a63f10. Manjunath is no longer at Linaro, the email address bounces. Given that, and the fact that others have reported problems with these patches, I'm reverting them until someone from Linaro who can SUPPORT THEM submits them. I will no longer accept patches from linaro.com developers unless a senior Linaro developer has signed off on them, which did not happen with this patch set. Reported-by:
-
Greg Kroah-Hartman authored
This reverts commit 018258b4. Manjunath is no longer at Linaro, the email address bounces. Given that, and the fact that others have reported problems with these patches, I'm reverting them until someone from Linaro who can SUPPORT THEM submits them. I will no longer accept patches from linaro.com developers unless a senior Linaro developer has signed off on them, which did not happen with this patch set. Reported-by:
-
Greg Kroah-Hartman authored
This reverts commit fea0896f. Manjunath is no longer at Linaro, the email address bounces. Given that, and the fact that others have reported problems with these patches, I'm reverting them until someone from Linaro who can SUPPORT THEM submits them. I will no longer accept patches from linaro.com developers unless a senior Linaro developer has signed off on them, which did not happen with this patch set. Reported-by:
-
Greg Kroah-Hartman authored
This reverts commit 36a87587. Manjunath is no longer at Linaro, the email address bounces. Given that, and the fact that others have reported problems with these patches, I'm reverting them until someone from Linaro who can SUPPORT THEM submits them. I will no longer accept patches from linaro.com developers unless a senior Linaro developer has signed off on them, which did not happen with this patch set. Reported-by:
-
- 12 Oct, 2013 7 commits
-
-
Matthias Beyer authored
Signed-off-by:
-
Matthias Beyer authored
Signed-off-by:
-
Matthias Beyer authored
including: - removing of trailing whitespace - removing spaces before array indexing (foo [] to foo[]) - reindention of a switch-case block - spaces to tabs Signed-off-by:
-
Johan Hovold authored
Make sure to return errors from tiocmget rather than rely on uninitialised stack data. Cc: stable@vger.kernel.org Signed-off-by:
Johan Hovold <jhovold@gmail.com> Signed-off-by:
-
Johan Hovold authored
Export usb_serial_generic_write_start which is needed when implementing a custom resume function while still relying on the generic write implementation. Signed-off-by:
-
Johan Hovold authored
Add memory-flags parameter to usb_serial_generic_write_start which is called from write, resume and completion handler, all with different allocation requirements. Note that by using the memory flag to determine when called from the completion handler, everything will work as before even if the completion handler is run with interrupts enabled (as suggested). Signed-off-by:
-
Johan Hovold authored
Clean up some comments, drop excessive comments and fix-up style. Signed-off-by:
-
- 11 Oct, 2013 11 commits
-
-
Matthias Beyer authored
The DECLARE_BITMAP macro should be used for declaring this bitmap. This commit converts the busmap from a struct to a simple (static) bitmap, using the DECLARE_BITMAP macro from linux/types.h. Please review, as I'm new to kernel development, I don't know if this has any hidden side effects! Suggested by joe@perches.com Signed-off-by:
-
Jingoo Han authored
Currently, Samsung is using 'EXYNOS' as the name of Samsung SoCs. Thus, ehci-exynos is preferred than ehci-s5p. Signed-off-by:
-
Jingoo Han authored
The non-DT for EXYNOS SoCs is not supported from v3.11. Thus, there is no need to support non-DT for Exynos EHCI driver. The 'include/linux/platform_data/usb-ehci-s5p.h' file has been used for non-DT support. Thus, the 'usb-ehci-s5p.h' file can be removed. Signed-off-by:
-
Jingoo Han authored
Since commit ca914350 "ARM: EXYNOS: Remove unused board files", s5p_device_ehci is not used anymore. Thus, s5p_device_ehci can be removed. Also, unnecessary S5P_DEV_USB_EHCI option is removed. Signed-off-by:
-
Alan Stern authored
For improved scheduling of transfers through a Transaction Translator, ehci-hcd will need to store a bunch of information associated with the FS/LS bus on the downstream side of the TT. This patch adds a pointer for such HCD-private data to the usb_tt structure. Signed-off-by:
-
Alan Stern authored
This patch significantly changes the scheduling code in ehci-hcd. Instead of calculating the current bandwidth utilization by trudging through the schedule and adding up the times used by the existing transfers, we will now maintain a table holding the time used for each of 64 microframes. This will drastically speed up the bandwidth computations. In addition, it eliminates a theoretical bug. An isochronous endpoint may have bandwidth reserved even at times when it has no transfers listed in the schedule. The table will keep track of the reserved bandwidth, whereas adding up entries in the schedule would miss it. As a corollary, we can keep bandwidth reserved for endpoints even when they aren't in active use. Eventually the bandwidth will be reserved when a new alternate setting is installed; for now the endpoint's reservation takes place when its first URB is submitted. A drawback of this approach is that transfers with an interval larger than 64 microframes will have to be charged for bandwidth as though the interval was 64. In practice this shouldn't matter much; transfers with longer intervals tend to be rather short anyway (things like hubs or HID devices). Another minor drawback is that we will keep track of two different period and phase values: the actual ones and the ones used for bandwidth allocation (which are limited to 64). This adds only a small amount of overhead: 3 bytes for each endpoint. The patch also adds a new debugfs file named "bandwidth" to display the information stored in the new table. Signed-off-by:
-
Alan Stern authored
This patch begins the process of unifying the scheduling parameters that ehci-hcd uses for interrupt and isochronous transfers. It creates an ehci_per_sched structure, which will be stored in both ehci_qh and ehci_iso_stream structures, and will contain the common scheduling information needed for both. Initially we merely create the new structure and move some existing fields into it. Later patches will add more fields and utilize these structures in improved scheduling algorithms. Signed-off-by:
-
Alan Stern authored
ehci-hcd is inconsistent in the sentinel values it uses to indicate that no frame number has been assigned for a periodic transfer. Some places it uses NO_FRAME (defined as 65535), other places it uses -1, and elsewhere it uses 9999. This patch defines a value for NO_FRAME which can fit in a 16-bit signed integer, and changes the code to use it everywhere. Signed-off-by:
-
Alan Stern authored
ehci-hcd uses a value of 0 in an endpoint's toggle flag to indicate that the endpoint has been reset (and therefore the Data Toggle bit needs to be cleared in the endpoint's QH overlay region). The toggle flag should be set to 0 only when ehci_endpoint_reset() succeeds. This patch moves the usb_settoggle() call into the appropriate branch of the "if" statement. Signed-off-by:
-
Alan Stern authored
The scheduling code in ehci-hcd contains an error. For full-speed isochronous-OUT transfers, the EHCI spec forbids scheduling Start-Split transactions in H-microframe 7, but the driver allows it anyway. This patch adds a check to prevent it. Signed-off-by:
-
Alan Stern authored
Although the bandwidth statistics maintained by ehci-hcd show up only in the /sys/kernel/debug/usb/devices file, they ought to be calculated correctly. The calculation for full-speed isochronous endpoints is wrong; it mistakenly yields bytes per microframe instead of bytes per frame. The "interval" value, which is in frames, should not be converted to microframes. Signed-off-by:
-
