Create an environment for CXL plumbing unit tests. Especially when it
comes to an algorithm for HDM Decoder (Host-managed Device Memory
Decoder) programming, the availability of an in-kernel-tree emulation
environment for CXL configuration complexity and corner cases speeds
development and deters regressions.

The approach taken mirrors what was done for tools/testing/nvdimm/. I.e.
an external module, cxl_test.ko built out of the tools/testing/cxl/
directory, provides mock implementations of kernel APIs and kernel
objects to simulate a real world device hierarchy.

One feedback for the tools/testing/nvdimm/ proposal was "why not do this
in QEMU?". In fact, the CXL development community has developed a QEMU
model for CXL [1]. However, there are a few blocking issues that keep
QEMU from being a tight fit for topology + provisioning unit tests:

1/ The QEMU community has yet to show interest in merging any of this
   support that has had patches on the list since November 2020. So,
   testing CXL to date involves building custom QEMU with out-of-tree
   patches.

2/ CXL mechanisms like cross-host-bridge interleave do not have a clear
   path to be emulated by QEMU without major infrastructure work. This
   is easier to achieve with the alloc_mock_res() approach taken in this
   patch to shortcut-define emulated system physical address ranges with
   interleave behavior.

The QEMU enabling has been critical to get the driver off the ground,
and may still move forward, but it does not address the ongoing needs of
a regression testing environment and test driven development.

This patch adds an ACPI CXL Platform definition with emulated CXL
multi-ported host-bridges. A follow on patch adds emulated memory
expander devices.
Acked-by: Ben Widawsky <ben.widawsky@intel.com>
Reported-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/20210202005948.241655-1-ben.widawsky@intel.com [1]
Link: https://lore.kernel.org/r/163164680798.2831381.838684634806668012.stgit@dwillia2-desk3.amr.corp.intel.comReviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

In preparation for a mocked unit test environment for CXL objects, allow
for multiple unique nvdimm-bridge objects.

For now, just allow multiple bridges to be registered. Later, when there
are multiple present, further updates are needed to
cxl_find_nvdimm_bridge() to identify which bridge is associated with
which CXL hierarchy for nvdimm registration.

Note that this does change the kernel device-name for the bridge object.
User space should not have any attachment to the device name at this
point as it is still early days in the CXL driver development.
Acked-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/163164647007.2831228.2150246954620721526.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by: Dan Williams <dan.j.williams@intel.com>

The LIBNVDIMM IOCTL UAPI calls back to the nvdimm-bus-provider to
translate the Linux command payload to the device native command format.
The LIBNVDIMM commands get-config-size, get-config-data, and
set-config-data, map to the CXL memory device commands device-identify,
get-lsa, and set-lsa. Recall that the label-storage-area (LSA) on an
NVDIMM device arranges for the provisioning of namespaces. Additionally
for CXL the LSA is used for provisioning regions as well.

The data from device-identify is already cached in the 'struct cxl_mem'
instance associated with @cxl_nvd, so that payload return is simply
crafted and no CXL command is issued. The conversion for get-lsa is
straightforward, but the conversion for set-lsa requires an allocation
to append the set-lsa header in front of the payload.
Reviewed-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/163122524923.2534512.9431316965424264864.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by: Dan Williams <dan.j.williams@intel.com>

The CXL_PMEM driver expects exclusive control of the label storage area
space. Similar to the LIBNVDIMM expectation that the label storage area
is only writable from userspace when the corresponding memory device is
not active in any region, the expectation is the native CXL_PCI UAPI
path is disabled while the cxl_nvdimm for a given cxl_memdev device is
active in LIBNVDIMM.

Add the ability to toggle the availability of a given command for the
UAPI path. Use that new capability to shutdown changes to partitions and
the label storage area while the cxl_nvdimm device is actively proxying
commands for LIBNVDIMM.
Reviewed-by: Ben Widawsky <ben.widawsky@intel.com>
Link: https://lore.kernel.org/r/163164579468.2830966.6980053377428474263.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by: Dan Williams <dan.j.williams@intel.com>

Define enabled_cmds as an embedded member of 'struct cxl_mem' rather
than a pointer to another dynamic allocation.

As this leaves only one user of cxl_cmd_count, just open code it and
delete the helper.
Acked-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/163116436415.2460985.10101824045493194813.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by: Dan Williams <dan.j.williams@intel.com>

Now that cxl_mem_{init,exit} no longer need to manage debugfs, switch
back to the smaller form of the boiler plate.
Acked-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/163116435825.2460985.7201322215431441130.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by: Dan Williams <dan.j.williams@intel.com>

Now that the internals of mailbox operations are abstracted from the PCI
specifics a bulk of infrastructure can move to the core.

The CXL_PMEM driver intends to proxy LIBNVDIMM UAPI and driver requests
to the equivalent functionality provided by the CXL hardware mailbox
interface. In support of that intent move the mailbox implementation to
a shared location for the CXL_PCI driver native IOCTL path and CXL_PMEM
nvdimm command proxy path to share.

A unit test framework seeks to implement a unit test backend transport
for mailbox commands to communicate mocked up payloads. It can reuse all
of the mailbox infrastructure minus the PCI specifics, so that also gets
moved to the core.

Finally with the mailbox infrastructure and ioctl handling being
transport generic there is no longer any need to pass file
file_operations to devm_cxl_add_memdev(). That allows all the ioctl
boilerplate to move into the core for unit test reuse.

No functional change intended, just code movement.
Acked-by: Ben Widawsky <ben.widawsky@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/163116435233.2460985.16197340449713287180.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by: Dan Williams <dan.j.williams@intel.com>

Commit 3d135db5 ("cxl/core: Move memdev management to core") left
this straggling include for cxl_memdev setup. Clean it up.

Cc: Ben Widawsky <ben.widawsky@intel.com>
Reported-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ben Widawsky <ben.widawsky@intel.com>
Link: https://lore.kernel.org/r/163116434668.2460985.12264757586266849616.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by: Dan Williams <dan.j.williams@intel.com>

In preparation for implementing a unit test backend transport for ioctl
operations, and making the mailbox available to the cxl/pmem
infrastructure, move the existing PCI specific portion of mailbox handling
to an "mbox_send" operation.

With this split all the PCI-specific transport details are comprehended
by a single operation and the rest of the mailbox infrastructure is
'struct cxl_mem' and 'struct cxl_memdev' generic.
Acked-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ben Widawsky <ben.widawsky@intel.com>
Link: https://lore.kernel.org/r/163116434098.2460985.9004760022659400540.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by: Dan Williams <dan.j.williams@intel.com>

Commit 0b9159d0 ("cxl/pci: Store memory capacity values") missed
updating the kernel-doc for 'struct cxl_mem' leading to the following
warnings:

./scripts/kernel-doc -v drivers/cxl/cxlmem.h 2>&1 | grep warn
drivers/cxl/cxlmem.h:107: warning: Function parameter or member 'total_bytes' not described in 'cxl_mem'
drivers/cxl/cxlmem.h:107: warning: Function parameter or member 'volatile_only_bytes' not described in 'cxl_mem'
drivers/cxl/cxlmem.h:107: warning: Function parameter or member 'persistent_only_bytes' not described in 'cxl_mem'
drivers/cxl/cxlmem.h:107: warning: Function parameter or member 'partition_align_bytes' not described in 'cxl_mem'
drivers/cxl/cxlmem.h:107: warning: Function parameter or member 'active_volatile_bytes' not described in 'cxl_mem'
drivers/cxl/cxlmem.h:107: warning: Function parameter or member 'active_persistent_bytes' not described in 'cxl_mem'
drivers/cxl/cxlmem.h:107: warning: Function parameter or member 'next_volatile_bytes' not described in 'cxl_mem'
drivers/cxl/cxlmem.h:107: warning: Function parameter or member 'next_persistent_bytes' not described in 'cxl_mem'

Also, it is redundant to describe those same parameters in the
kernel-doc for cxl_mem_get_partition_info(). Given the only user of that
routine updates the values in @cxlm, just do that implicitly internal to
the helper.

Cc: Ira Weiny <ira.weiny@intel.com>
Reported-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/163157174216.2653013.1277706528753990974.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by: Dan Williams <dan.j.williams@intel.com>

In preparation for adding a unit test provider of a cxl_memdev, convert
the 'struct cxl_mem' driver context to carry a generic device rather
than a pci device.

Note, some dev_dbg() lines needed extra reformatting per clang-format.

This conversion also allows the cxl_mem_create() and
devm_cxl_add_memdev() calling conventions to be simplified. The "host"
for a cxl_memdev, must be the same device for the driver that allocated
@cxlm.
Acked-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ben Widawsky <ben.widawsky@intel.com>
Link: https://lore.kernel.org/r/163116432973.2460985.7553504957932024222.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by: Dan Williams <dan.j.williams@intel.com>

Now that all of use sites of label data have been converted to nsl_*
helpers, introduce the CXL label format. The ->cxl flag in
nvdimm_drvdata indicates the label format the device expects. A
follow-on patch allows a bus provider to select the label style.

Note that the EFI definition of the labels represents the Linux "claim
class" with a GUID. The CXL definition of the labels stores the same
identifier in UUID byte order.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/163116432405.2460985.5547867384570123403.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by: Dan Williams <dan.j.williams@intel.com>

Add a definition of the CXL 2.0 region label format. Note this is done
as a separate patch to make the next patch that adds namespace label
support easier to read.
Reported-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/163116431893.2460985.4003511000574373922.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by: Dan Williams <dan.j.williams@intel.com>

Clean up existing kernel-doc warnings before adding new CXL label data
structures.

drivers/nvdimm/label.h:66: warning: Function parameter or member 'labelsize' not described in 'nd_namespace_index'
drivers/nvdimm/label.h:66: warning: Function parameter or member 'free' not described in 'nd_namespace_index'
drivers/nvdimm/label.h:103: warning: Function parameter or member 'align' not described in 'nd_namespace_label'
drivers/nvdimm/label.h:103: warning: Function parameter or member 'reserved' not described in 'nd_namespace_label'
drivers/nvdimm/label.h:103: warning: Function parameter or member 'type_guid' not described in 'nd_namespace_label'
drivers/nvdimm/label.h:103: warning: Function parameter or member 'abstraction_guid' not described in 'nd_namespace_label'
drivers/nvdimm/label.h:103: warning: Function parameter or member 'reserved2' not described in 'nd_namespace_label'
drivers/nvdimm/label.h:103: warning: Function parameter or member 'checksum' not described in 'nd_namespace_label'
Reported-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/163116431381.2460985.6990754901097922099.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by: Dan Williams <dan.j.williams@intel.com>

The CXL specification defines a mechanism for namespaces to be comprised
of multiple dis-contiguous ranges. Introduce that concept to the legacy
NVDIMM namespace implementation with a new nsl_set_nrange() helper, that
sets the number of ranges to 1. Once the NVDIMM subsystem supports CXL
labels and updates its namespace capacity provisioning for
dis-contiguous support nsl_set_nrange() can be updated, but in the
meantime CXL label validation requires nrange be non-zero.
Reported-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/163116430804.2460985.5482188351381597529.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by: Dan Williams <dan.j.williams@intel.com>

In the CXL namespace label there is no need for nlabel since that is
inferred from the region. Add a helper that moves nsl_get_label() behind
a helper that validates the number of labels relative to the region.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/163116430293.2460985.12693942353621355232.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by: Dan Williams <dan.j.williams@intel.com>

In preparation for CXL labels that move the uuid to a different offset
in the label, add nsl_{ref,get,validate}_uuid(). These helpers use the
proper uuid_t type. That type definition predated the libnvdimm
subsystem, so now is as a good a time as any to convert all the uuid
handling in the subsystem to uuid_t to match the helpers.

Note that the uuid fields in the label data and superblocks is not
replaced per Andy's expectation that uuid_t is a kernel internal type
not to appear in external ABI interfaces. So, in those case
{import,export}_uuid() is used to go between the 2 types.

Also note that this rework uncovered some unnecessary copies for label
comparisons, those are cleaned up with nsl_uuid_equal().

As for the whitespace changes, all new code is clang-format compliant.
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/163116429748.2460985.15659993454313919977.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by: Dan Williams <dan.j.williams@intel.com>

Nathan Chancellor reports that the recent change to pci_iounmap in
commit 9caea000 ("parisc: Declare pci_iounmap() parisc version only
when CONFIG_PCI enabled") causes build errors on arm64.

It took me about two hours to convince myself that I think I know what
the logic of that mess of #ifdef's in the <asm-generic/io.h> header file
really aim to do, and rewrite it to be easier to follow.

Famous last words.

Anyway, the code has now been lifted from that grotty header file into
lib/pci_iomap.c, and has fairly extensive comments about what the logic
is.  It also avoids indirecting through another confusing (and badly
named) helper function that has other preprocessor config conditionals.

Let's see what odd architecture did something else strange in this area
to break things.  But my arm64 cross build is clean.

Fixes: 9caea000 ("parisc: Declare pci_iounmap() parisc version only when CONFIG_PCI enabled")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Ulrich Teichert <krypton@ulrich-teichert.org>
Cc: James Bottomley <James.Bottomley@hansenpartnership.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull x86 fixes from Borislav Petkov:

 - Prevent a infinite loop in the MCE recovery on return to user space,
   which was caused by a second MCE queueing work for the same page and
   thereby creating a circular work list.

 - Make kern_addr_valid() handle existing PMD entries, which are marked
   not present in the higher level page table, correctly instead of
   blindly dereferencing them.

 - Pass a valid address to sanitize_phys(). This was caused by the
   mixture of inclusive and exclusive ranges. memtype_reserve() expect
   'end' being exclusive, but sanitize_phys() wants it inclusive. This
   worked so far, but with end being the end of the physical address
   space the fail is exposed.

 - Increase the maximum supported GPIO numbers for 64bit. Newer SoCs
   exceed the previous maximum.

* tag 'x86_urgent_for_v5.15_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mce: Avoid infinite loop for copy from user recovery
  x86/mm: Fix kern_addr_valid() to cope with existing but not present entries
  x86/platform: Increase maximum GPIO number for X86_64
  x86/pat: Pass valid address to sanitize_phys()

Pull perf event fix from Thomas Gleixner:
 "A single fix for the perf core where a value read with READ_ONCE() was
  checked and then reread which makes all the checks invalid. Reuse the
  already read value instead"

* tag 'perf-urgent-2021-09-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  events: Reuse value read using READ_ONCE instead of re-reading it

Pull locking fixes from Thomas Gleixner:
 "A set of updates for the RT specific reader/writer locking base code:

   - Make the fast path reader ordering guarantees correct.

   - Code reshuffling to make the fix simpler"

[ This plays ugly games with atomic_add_return_release() because we
  don't have a plain atomic_add_release(), and should really be cleaned
  up, I think    - Linus ]

* tag 'locking-urgent-2021-09-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/rwbase: Take care of ordering guarantee for fastpath reader
  locking/rwbase: Extract __rwbase_write_trylock()
  locking/rwbase: Properly match set_and_save_state() to restore_state()

Pull powerpc fixes from Michael Ellerman:

 - Fix crashes when scv (System Call Vectored) is used to make a syscall
   when a transaction is active, on Power9 or later.

 - Fix bad interactions between rfscv (Return-from scv) and Power9
   fake-suspend mode.

 - Fix crashes when handling machine checks in LPARs using the Hash MMU.

 - Partly revert a recent change to our XICS interrupt controller code,
   which broke the recently added Microwatt support.

Thanks to Cédric Le Goater, Eirik Fuller, Ganesh Goudar, Gustavo Romero,
Joel Stanley, Nicholas Piggin.

* tag 'powerpc-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/xics: Set the IRQ chip data for the ICS native backend
  powerpc/mce: Fix access error in mce handler
  KVM: PPC: Book3S HV: Tolerate treclaim. in fake-suspend mode changing registers
  powerpc/64s: system call rfscv workaround for TM bugs
  selftests/powerpc: Add scv versions of the basic TM syscall tests
  powerpc/64s: system call scv tabort fix for corrupt irq soft-mask state

Merge tag 'kbuild-fixes-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Fix bugs in checkkconfigsymbols.py

 - Fix missing sys import in gen_compile_commands.py

 - Fix missing FORCE warning for ARCH=sh builds

 - Fix -Wignored-optimization-argument warnings for Clang builds

 - Turn -Wignored-optimization-argument into an error in order to stop
   building instead of sprinkling warnings

* tag 'kbuild-fixes-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: Add -Werror=ignored-optimization-argument to CLANG_FLAGS
  x86/build: Do not add -falign flags unconditionally for clang
  kbuild: Fix comment typo in scripts/Makefile.modpost
  sh: Add missing FORCE prerequisites in Makefile
  gen_compile_commands: fix missing 'sys' package
  checkkconfigsymbols.py: Remove skipping of help lines in parse_kconfig_file
  checkkconfigsymbols.py: Forbid passing 'HEAD' to --commit

Merge tag 'perf-tools-fixes-for-v5.15-2021-09-18' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Fix ip display in 'perf script' when output type != attr->type.

 - Ignore deprecation warning when using libbpf'sg btf__get_from_id(),
   fixing the build with libbpf v0.6+.

 - Make use of FD() robust in libperf, fixing a segfault with 'perf stat
   --iostat list'.

 - Initialize addr_location:srcline pointer to NULL when resolving
   callchain addresses.

 - Fix fused instruction logic for assembly functions in 'perf
   annotate'.

* tag 'perf-tools-fixes-for-v5.15-2021-09-18' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf bpf: Ignore deprecation warning when using libbpf's btf__get_from_id()
  libperf evsel: Make use of FD robust.
  perf machine: Initialize srcline string member in add_location struct
  perf script: Fix ip display when type != attr->type
  perf annotate: Fix fused instr logic for assembly functions

The old dmascc driver depends on the legacy ISA_DMA_API, and blindly
just casts the kernel virtual address to 'int' for set_dma_addr().

That works only incidentally, and because the high bits of the address
will be ignored anyway. And on 64-bit architectures it causes warnings.

Admittedly, 64-bit architectures with ISA are basically dead - I think
the only example of this is alpha, and nobody would ever use the dmascc
driver there.  But hey, the fix is easy enough, the end result is
cleaner, and it's yet another configuration that now builds without
warnings.

If somebody actually uses this driver on an alpha and this fixes it for
you, please email me.  Because that is just incredibly bizarre.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

With the previous commit (9caea000: "parisc: Declare pci_iounmap()
parisc version only when CONFIG_PCI enabled") we can now enable
GENERIC_PCI_IOMAP unconditionally on alpha, and if PCI is not enabled we
will just get the nice empty helper functions that allow mixed-bus
drivers to build.

Example driver: the old 3com/3c59x.c driver works with either the PCI or
the EISA version of the 3x59x card, but wouldn't build in an EISA-only
configuration because of missing pci_iomap() and pci_iounmap() dummy
wrappers.

Most of the other PCI infrastructure just becomes empty wrappers even
without GENERIC_PCI_IOMAP, and it's not obvious that the pci_iomap
functionality shouldn't do the same, but this works.

Cc: Ulrich Teichert <krypton@ulrich-teichert.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Linus noticed odd declaration rules for pci_iounmap() in iomap.h and
pci_iomap.h, where it dependend on either NO_GENERIC_PCI_IOPORT_MAP or
GENERIC_IOMAP when CONFIG_PCI was disabled.

Testing on parisc seems to indicate that we need pci_iounmap() only when
CONFIG_PCI is enabled, so the declaration of pci_iounmap() can be moved
cleanly into pci_iomap.h in sync with the declarations of pci_iomap().

Link: https://lore.kernel.org/all/CAHk-=wjRrh98pZoQ+AzfWmsTZacWxTJKXZ9eKU2X_0+jM=O8nw@mail.gmail.com/Signed-off-by: Helge Deller <deller@gmx.de>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes: 97a29d59 ("[PARISC] fix compile break caused by iomap: make IOPORT/PCI mapping functions conditional")
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Ulrich Teichert <krypton@ulrich-teichert.org>
Cc: James Bottomley <James.Bottomley@hansenpartnership.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This reverts commit 27da370e.

Sudip Mukherjee reports that this broke pulseaudio with a NULL pointer
dereference in vc4_hdmi_audio_prepare(), bisected it to this commit, and
confirmed that a revert fixed the problem.

Revert the problematic commit until fixed.

Link: https://lore.kernel.org/all/CADVatmPB9-oKd=ypvj25UYysVo6EZhQ6bCM7EvztQBMyiZfAyw@mail.gmail.com/
Link: https://lore.kernel.org/all/CADVatmN5EpRshGEPS_JozbFQRXg5w_8LFB3OMP1Ai-ghxd3w4g@mail.gmail.com/Reported-and-tested-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Emma Anholt <emma@anholt.net>
Cc: Dave Airlie <airlied@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This reverts commits

  9984d666 ("drm/vc4: hdmi: Make sure the controller is powered in detect")
  411efa18 ("drm/vc4: hdmi: Move the HSM clock enable to runtime_pm")

as Michael Stapelberg reports that the new runtime PM changes cause his
Raspberry Pi 3 to hang on boot, probably due to interactions with other
changes in the DRM tree (because a bisect points to the merge in commit
e058a84b: "Merge tag 'drm-next-2021-07-01' of git://.../drm").

Revert these two commits until it's been resolved.

Link: https://lore.kernel.org/all/871r5mp7h2.fsf@midna.i-did-not-set--mail-host-address--so-tickle-me/Reported-and-tested-by: Michael Stapelberg <michael@stapelberg.ch>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Dave Stevenson <dave.stevenson@raspberrypi.com>
Cc: Dave Airlie <airlied@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Similar to commit 589834b3 ("kbuild: Add
-Werror=unknown-warning-option to CLANG_FLAGS").

Clang ignores certain GCC flags that it has not implemented, only
emitting a warning:

$ echo | clang -fsyntax-only -falign-jumps -x c -
clang-14: warning: optimization flag '-falign-jumps' is not supported
[-Wignored-optimization-argument]

When one of these flags gets added to KBUILD_CFLAGS unconditionally, all
subsequent cc-{disable-warning,option} calls fail because -Werror was
added to these invocations to turn the above warning and the equivalent
-W flag warning into errors.

To catch the presence of these flags earlier, turn
-Wignored-optimization-argument into an error so that the flags can
either be implemented or ignored via cc-option and there are no more
weird errors.
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

clang does not support -falign-jumps and only recently gained support
for -falign-loops. When one of the configuration options that adds these
flags is enabled, clang warns and all cc-{disable-warning,option} that
follow fail because -Werror gets added to test for the presence of this
warning:

clang-14: warning: optimization flag '-falign-jumps=0' is not supported
[-Wignored-optimization-argument]

To resolve this, add a couple of cc-option calls when building with
clang; gcc has supported these options since 3.2 so there is no point in
testing for their support. -falign-functions was implemented in clang-7,
-falign-loops was implemented in clang-14, and -falign-jumps has not
been implemented yet.

Link: https://lore.kernel.org/r/YSQE2f5teuvKLkON@Ryzen-9-3900X.localdomain/
Link: https://lore.kernel.org/r/20210824022640.2170859-2-nathan@kernel.org/Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Change comment "create one <module>.mod.c file pr. module"
to "create one <module>.mod.c file per module"
Signed-off-by: Ramji Jiyani <ramjiyani@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

make:

    arch/sh/boot/Makefile:87: FORCE prerequisite is missing

Add the missing FORCE prerequisites for all build targets identified by
"make help".

Fixes: e1f86d7b ("kbuild: warn if FORCE is missing for if_changed(_dep,_rule) and filechk")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

We need to import the 'sys' package since the script has called
sys.exit() method.

Fixes: 6ad7cbc0 ("Makefile: Add clang-tidy and static analyzer support to makefile")
Signed-off-by: Kortan <kortanzh@gmail.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

When parsing Kconfig files to find symbol definitions and references,
lines after a 'help' line are skipped until a new config definition
starts.

However, Kconfig statements can actually be after a help section, as
long as these have shallower indentation. These are skipped by the
parser.

This means that symbols referenced in this kind of statements are
ignored by this function and thus are not considered undefined
references in case the symbol is not defined.

Remove the 'skip' logic entirely, as it is not needed if we just use the
STMT regex to find the end of help lines.

However, this means that keywords that appear as part of the help
message (i.e. with the same indentation as the help lines) it will be
considered as a reference/definition. This can happen now as well, but
only with REGEX_KCONFIG_DEF lines. Also, the keyword must have a SYMBOL
after it, which probably means that someone referenced a config in the
help so it seems like a bonus :)

The real solution is to keep track of the indentation when a the first
help line in encountered and then handle DEF and STMT lines only if the
indentation is shallower.
Signed-off-by: Ariel Marcovitch <arielmarcovitch@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

As opposed to the --diff option, --commit can get ref names instead of
commit hashes.

When using the --commit option, the script resets the working directory
to the commit before the given ref, by adding '~' to the end of the ref.

However, the 'HEAD' ref is relative, and so when the working directory
is reset to 'HEAD~', 'HEAD' points to what was 'HEAD~'. Then when the
script resets to 'HEAD' it actually stays in the same commit. In this
case, the script won't report any cases because there is no diff between
the cases of the two refs.

Prevent the user from using HEAD refs.

A better solution might be to resolve the refs before doing the
reset, but for now just disallow such refs.
Signed-off-by: Ariel Marcovitch <arielmarcovitch@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

We already had the implementation for __udiv_qrnnd (unsigned divide for
multi-precision arithmetic) as part of the alpha math emulation code.

But you can disable the math emulation code - even if you shouldn't -
and then the MPI code that actually wants this functionality (and is
needed by various crypto functions) will fail to build.

So move the extended-precision divide code to be a regular library
function, just like all the regular division code is.  That way ie is
available regardless of math-emulation.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Ok, it almost certainly is still broken on actual hardware, but the
immediate reason for it having been marked BROKEN was a build error that
is fixed by just making sure the low-level IO header file is included
sufficiently early that the __EXTERN_INLINE hackery takes effect.

This was marked broken back in 2017 by commit 1883c9f4 ("alpha: mark
jensen as broken"), but Ulrich Teichert made me look at it as part of my
cross-build work to make sure -Werror actually does the right thing.

There are lots of alpha configurations that do not build cleanly, but
now it's no longer because Jensen wouldn't be buildable.  That said,
because the Jensen platform doesn't force PCI to be enabled (Jensen only
had EISA), it ends up being somewhat interesting as a source of odd
configs.
Reported-by: Ulrich Teichert <krypton@ulrich-teichert.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Perf code re-implements libbpf's btf__load_from_kernel_by_id() API as
a weak function, presumably to dynamically link against old version of
libbpf shared library. Unfortunately this causes compilation warning
when perf is compiled against libbpf v0.6+.

For now, just ignore deprecation warning, but there might be a better
solution, depending on perf's needs.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: kernel-team@fb.com
LPU-Reference: 20210914170004.4185659-1-andrii@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>