- 27 Jan, 2022 19 commits
-
-
Yonghong Song authored
Specify pahole version requirement (1.23) for btf_tag subtests btf_type_tag_user_{mod1, mod2, vmlinux}. Signed-off-by:Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/r/20220127154622.663337-1-yhs@fb.comSigned-off-by:
Alexei Starovoitov <ast@kernel.org>
-
Yonghong Song authored
Added a selftest with three__user usages: a __user pointer-type argument in bpf_testmod, a __user pointer-type struct member in bpf_testmod, and a __user pointer-type struct member in vmlinux. In all cases, directly accessing the user memory will result verification failure. $ ./test_progs -v -n 22/3 ... libbpf: prog 'test_user1': BPF program load failed: Permission denied libbpf: prog 'test_user1': -- BEGIN PROG LOAD LOG -- R1 type=ctx expected=fp 0: R1=ctx(id=0,off=0,imm=0) R10=fp0 ; int BPF_PROG(test_user1, struct bpf_testmod_btf_type_tag_1 *arg) 0: (79) r1 = *(u64 *)(r1 +0) func 'bpf_testmod_test_btf_type_tag_user_1' arg0 has btf_id 136561 type STRUCT 'bpf_testmod_btf_type_tag_1' 1: R1_w=user_ptr_bpf_testmod_btf_type_tag_1(id=0,off=0,imm=0) ; g = arg->a; 1: (61) r1 = *(u32 *)(r1 +0) R1 invalid mem access 'user_ptr_' ... #22/3 btf_tag/btf_type_tag_user_mod1:OK $ ./test_progs -v -n 22/4 ... libbpf: prog 'test_user2': BPF program load failed: Permission denied libbpf: prog 'test_user2': -- BEGIN PROG LOAD LOG -- R1 type=ctx expected=fp 0: R1=ctx(id=0,off=0,imm=0) R10=fp0 ; int BPF_PROG(test_user2, struct bpf_testmod_btf_type_tag_2 *arg) 0: (79) r1 = *(u64 *)(r1 +0) func 'bpf_testmod_test_btf_type_tag_user_2' arg0 has btf_id 136563 type STRUCT 'bpf_testmod_btf_type_tag_2' 1: R1_w=ptr_bpf_testmod_btf_type_tag_2(id=0,off=0,imm=0) ; g = arg->p->a; 1: (79) r1 = *(u64 *)(r1 +0) ; R1_w=user_ptr_bpf_testmod_btf_type_tag_1(id=0,off=0,imm=0) ; g = arg->p->a; 2: (61) r1 = *(u32 *)(r1 +0) R1 invalid mem access 'user_ptr_' ... #22/4 btf_tag/btf_type_tag_user_mod2:OK $ ./test_progs -v -n 22/5 ... libbpf: prog 'test_sys_getsockname': BPF program load failed: Permission denied libbpf: prog 'test_sys_getsockname': -- BEGIN PROG LOAD LOG -- R1 type=ctx expected=fp 0: R1=ctx(id=0,off=0,imm=0) R10=fp0 ; int BPF_PROG(test_sys_getsockname, int fd, struct sockaddr *usockaddr, 0: (79) r1 = *(u64 *)(r1 +8) func '__sys_getsockname' arg1 has btf_id 2319 type STRUCT 'sockaddr' 1: R1_w=user_ptr_sockaddr(id=0,off=0,imm=0) ; g = usockaddr->sa_family; 1: (69) r1 = *(u16 *)(r1 +0) R1 invalid mem access 'user_ptr_' ... #22/5 btf_tag/btf_type_tag_user_vmlinux:OK Signed-off-by:
-
Yonghong Song authored
The uapi btf.h contains the following declaration: struct btf_decl_tag { __s32 component_idx; }; The skeleton will also generate a struct with name "btf_decl_tag" for bpf program btf_decl_tag.c. Rename btf_decl_tag.c to test_btf_decl_tag.c so the corresponding skeleton struct name becomes "test_btf_decl_tag". This way, we could include uapi btf.h in prog_tests/btf_tag.c. There is no functionality change for this patch. Signed-off-by: -
Yonghong Song authored
BPF verifier supports direct memory access for BPF_PROG_TYPE_TRACING type of bpf programs, e.g., a->b. If "a" is a pointer pointing to kernel memory, bpf verifier will allow user to write code in C like a->b and the verifier will translate it to a kernel load properly. If "a" is a pointer to user memory, it is expected that bpf developer should be bpf_probe_read_user() helper to get the value a->b. Without utilizing BTF __user tagging information, current verifier will assume that a->b is a kernel memory access and this may generate incorrect result. Now BTF contains __user information, it can check whether the pointer points to a user memory or not. If it is, the verifier can reject the program and force users to use bpf_probe_read_user() helper explicitly. In the future, we can easily extend btf_add_space for other address space tagging, for example, rcu/percpu etc. Signed-off-by:
-
Yonghong Song authored
The __user attribute is currently mainly used by sparse for type checking. The attribute indicates whether a memory access is in user memory address space or not. Such information is important during tracing kernel internal functions or data structures as accessing user memory often has different mechanisms compared to accessing kernel memory. For example, the perf-probe needs explicit command line specification to indicate a particular argument or string in user-space memory ([1], [2], [3]). Currently, vmlinux BTF is available in kernel with many distributions. If __user attribute information is available in vmlinux BTF, the explicit user memory access information from users will not be necessary as the kernel can figure it out by itself with vmlinux BTF. Besides the above possible use for perf/probe, another use case is for bpf verifier. Currently, for bpf BPF_PROG_TYPE_TRACING type of bpf programs, users can write direct code like p->m1->m2 and "p" could be a function parameter. Without __user information in BTF, the verifier will assume p->m1 accessing kernel memory and will generate normal loads. Let us say "p" actually tagged with __user in the source code. In such cases, p->m1 is actually accessing user memory and direct load is not right and may produce incorrect result. For such cases, bpf_probe_read_user() will be the correct way to read p->m1. To support encoding __user information in BTF, a new attribute __attribute__((btf_type_tag("<arbitrary_string>"))) is implemented in clang ([4]). For example, if we have #define __user __attribute__((btf_type_tag("user"))) during kernel compilation, the attribute "user" information will be preserved in dwarf. After pahole converting dwarf to BTF, __user information will be available in vmlinux BTF. The following is an example with latest upstream clang (clang14) and pahole 1.23: [$ ~] cat test.c #define __user __attribute__((btf_type_tag("user"))) int foo(int __user *arg) { return *arg; } [$ ~] clang -O2 -g -c test.c [$ ~] pahole -JV test.o ... [1] INT int size=4 nr_bits=32 encoding=SIGNED [2] TYPE_TAG user type_id=1 [3] PTR (anon) type_id=2 [4] FUNC_PROTO (anon) return=1 args=(3 arg) [5] FUNC foo type_id=4 [$ ~] You can see for the function argument "int __user *arg", its type is described as PTR -> TYPE_TAG(user) -> INT The kernel can use this information for bpf verification or other use cases. Current btf_type_tag is only supported in clang (>= clang14) and pahole (>= 1.23). gcc support is also proposed and under development ([5]). [1] http://lkml.kernel.org/r/155789874562.26965.10836126971405890891.stgit@devnote2 [2] http://lkml.kernel.org/r/155789872187.26965.4468456816590888687.stgit@devnote2 [3] http://lkml.kernel.org/r/155789871009.26965.14167558859557329331.stgit@devnote2 [4] https://reviews.llvm.org/D111199 [5] https://lore.kernel.org/bpf/0cbeb2fb-1a18-f690-e360-24b1c90c2a91@fb.com/Signed-off-by: -
Pavel Begunkov authored
Even though there is a static key protecting from overhead from cgroup-bpf skb filtering when there is nothing attached, in many cases it's not enough as registering a filter for one type will ruin the fast path for all others. It's observed in production servers I've looked at but also in laptops, where registration is done during init by systemd or something else. Add a per-socket fast path check guarding from such overhead. This affects both receive and transmit paths of TCP, UDP and other protocols. It showed ~1% tx/s improvement in small payload UDP send benchmarks using a real NIC and in a server environment and the number jumps to 2-3% for preemtible kernels. Reviewed-by:
Stanislav Fomichev <sdf@google.com> Signed-off-by:
Pavel Begunkov <asml.silence@gmail.com> Acked-by:
Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/r/d8c58857113185a764927a46f4b5a058d36d3ec3.1643292455.git.asml.silence@gmail.comSigned-off-by:
-
Yonghong Song authored
When building selftests/bpf with clang make -j LLVM=1 make -C tools/testing/selftests/bpf -j LLVM=1 I hit the following compilation error: trace_helpers.c:152:9: error: variable 'found' is used uninitialized whenever 'while' loop exits because its condition is false [-Werror,-Wsometimes-uninitialized] while (fscanf(f, "%zx-%zx %s %zx %*[^\n]\n", &start, &end, buf, &base) == 4) { ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ trace_helpers.c:161:7: note: uninitialized use occurs here if (!found) ^~~~~ trace_helpers.c:152:9: note: remove the condition if it is always true while (fscanf(f, "%zx-%zx %s %zx %*[^\n]\n", &start, &end, buf, &base) == 4) { ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1 trace_helpers.c:145:12: note: initialize the variable 'found' to silence this warning bool found; ^ = false It is possible that for sane /proc/self/maps we may never hit the above issue in practice. But let us initialize variable 'found' properly to silence the compilation error. Signed-off-by: -
Magnus Karlsson authored
After commit 710ad98c ("veth: Do not record rx queue hint in veth_xmit"), veth no longer receives traffic on the same queue as it was sent on. This breaks the bpf_res test for the AF_XDP selftests as the socket tied to queue 1 will not receive traffic anymore. Modify the test so that two sockets are tied to queue id 0 using a shared umem instead. When killing the first socket enter the second socket into the xskmap so that traffic will flow to it. This will still test that the resources are not cleaned up until after the second socket dies, without having to rely on veth supporting rx_queue hints. Reported-by:
Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by:
Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Reviewed-by:
John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20220125082945.26179-1-magnus.karlsson@gmail.com
-
Daniel Borkmann authored
Maciej Fijalkowski says: ==================== Unfortunately, similar scalability issues that were addressed for XDP processing in ice, exist for XDP in the zero-copy driver used by AF_XDP. Let's resolve them in mostly the same way as we did in [0] and utilize the Tx batching API from XSK buffer pool. Move the array of Tx descriptors that is used with batching approach to the XSK buffer pool. This means that future users of this API will not have to carry the array on their own side, they can simple refer to pool's tx_desc array. We also improve the Rx side where we extend ice_alloc_rx_buf_zc() to handle the ring wrap and bump Rx tail more frequently. By doing so, Rx side is adjusted to Tx and it was needed for l2fwd scenario. Here are the improvements of performance numbers that this set brings measured with xdpsock app in busy poll mode for 1 and 2 core modes. Both Tx and Rx rings were sized to 1k length and busy poll budget was 256. ---------------------------------------------------------------- | txonly: | l2fwd | rxdrop ---------------------------------------------------------------- 1C | 149% | 14% | 3% ---------------------------------------------------------------- 2C | 134% | 20% | 5% ---------------------------------------------------------------- Next step will be to introduce batching onto Rx side. v5: * collect acks * fix typos * correct comments showing cache line boundaries in ice_tx_ring struct v4 - address Alexandr's review: * new patch (2) for making sure ring size is pow(2) when attaching xsk socket * don't open code ALIGN_DOWN (patch 3) * resign from storing tx_thresh in ice_tx_ring (patch 4) * scope variables in a better way for Tx batching (patch 7) v3: * drop likely() that was wrapping napi_complete_done (patch 1) * introduce configurable Tx threshold (patch 2) * handle ring wrap on Rx side when allocating buffers (patch 3) * respect NAPI budget when cleaning Tx descriptors in ZC (patch 6) v2: * introduce new patch that resets @next_dd and @next_rs fields * use batching API for AF_XDP Tx on ice side [0]: https://lore.kernel.org/bpf/20211015162908.145341-8-anthony.l.nguyen@intel.com/ ==================== Signed-off-by: -
Maciej Fijalkowski authored
One of the things that commit 5574ff7b ("i40e: optimize AF_XDP Tx completion path") introduced was the @xdp_tx_active field. Its usage from i40e can be adjusted to ice driver and give us positive performance results. If the descriptor that @next_dd points to has been sent by HW (its DD bit is set), then we are sure that at least quarter of the ring is ready to be cleaned. If @xdp_tx_active is 0 which means that related xdp_ring is not used for XDP_{TX, REDIRECT} workloads, then we know how many XSK entries should placed to completion queue, IOW walking through the ring can be skipped. Signed-off-by:
Alexander Lobakin <alexandr.lobakin@intel.com> Acked-by:
-
Maciej Fijalkowski authored
Apply the logic that was done for regular XDP from commit 9610bd98 ("ice: optimize XDP_TX workloads") to the ZC side of the driver. On top of that, introduce batching to Tx that is inspired by i40e's implementation with adjustments to the cleaning logic - take into the account NAPI budget in ice_clean_xdp_irq_zc(). Separating the stats structs onto separate cache lines seemed to improve the performance. Signed-off-by:
-
Maciej Fijalkowski authored
Commit 9610bd98 ("ice: optimize XDP_TX workloads") introduced @next_dd and @next_rs to ice_tx_ring struct. Currently, their state is not restored in ice_clean_tx_ring(), which was not causing any troubles as the XDP rings are gone after we're done with XDP prog on interface. For upcoming usage of mentioned fields in AF_XDP, this might expose us to a potential dead Tx side. Scenario would look like following (based on xdpsock): - two xdpsock instances are spawned in Tx mode - one of them is killed - XDP prog is kept on interface due to the other xdpsock still running * this means that XDP rings stayed in place - xdpsock is launched again on same queue id that was terminated on - @next_dd and @next_rs setting is bogus, therefore transmit side is broken To protect us from the above, restore the initial @next_rs and @next_dd values when cleaning the Tx ring. Signed-off-by:
-
Magnus Karlsson authored
Move desc_array from the driver to the pool. The reason behind this is that we can then reuse this array as a temporary storage for descriptors in all zero-copy drivers that use the batched interface. This will make it easier to add batching to more drivers. i40e is the only driver that has a batched Tx zero-copy implementation, so no need to touch any other driver. Signed-off-by:
-
Maciej Fijalkowski authored
XDP_TX workloads use a concept of Tx threshold that indicates the interval of setting RS bit on descriptors which in turn tells the HW to generate an interrupt to signal the completion of Tx on HW side. It is currently based on a constant value of 32 which might not work out well for various sizes of ring combined with for example batch size that can be set via SO_BUSY_POLL_BUDGET. Internal tests based on AF_XDP showed that most convenient setup of mentioned threshold is when it is equal to quarter of a ring length. Make use of recently introduced ICE_RING_QUARTER macro and use this value as a substitute for ICE_TX_THRESH. Align also ethtool -G callback so that next_dd/next_rs fields are up to date in terms of the ring size. Signed-off-by:
-
Maciej Fijalkowski authored
Currently, if ice_clean_rx_irq_zc() processed the whole ring and next_to_use != 0, then ice_alloc_rx_buf_zc() would not refill the whole ring even if the XSK buffer pool would have enough free entries (either from fill ring or the internal recycle mechanism) - it is because ring wrap is not handled. Improve the logic in ice_alloc_rx_buf_zc() to address the problem above. Do not clamp the count of buffers that is passed to xsk_buff_alloc_batch() in case when next_to_use + buffer count >= rx_ring->count, but rather split it and have two calls to the mentioned function - one for the part up until the wrap and one for the part after the wrap. Signed-off-by:
-
Maciej Fijalkowski authored
With the upcoming introduction of batching to XSK data path, performance wise it will be the best to have the ring descriptor count to be aligned to power of 2. Check if ring sizes that user is going to attach the XSK socket fulfill the condition above. For Tx side, although check is being done against the Tx queue and in the end the socket will be attached to the XDP queue, it is fine since XDP queues get the ring->count setting from Tx queues. Suggested-by:
-
Maciej Fijalkowski authored
Remove the likely before napi_complete_done as this is the unlikely case when busy-poll is used. Removing this has a positive performance impact for busy-poll and no negative impact to the regular case. Signed-off-by:
-
Jakub Kicinski authored
Remove two dead stubs, sk_msg_clear_meta() was never used, use of xskq_cons_is_full() got replaced by xsk_tx_writeable() in v5.10. Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20220126185412.2776254-1-kuba@kernel.orgSigned-off-by:
-
Andrii Nakryiko authored
Fix how selftests determine relative offset of a function that is uprobed. Previously, there was an assumption that uprobed function is always in the first executable region, which is not always the case (libbpf CI hits this case now). So get_base_addr() approach in isolation doesn't work anymore. So teach get_uprobe_offset() to determine correct memory mapping and calculate uprobe offset correctly. While at it, I merged together two implementations of get_uprobe_offset() helper, moving powerpc64-specific logic inside (had to add extra {} block to avoid unused variable error for insn). Also ensured that uprobed functions are never inlined, but are still static (and thus local to each selftest), by using a no-op asm volatile block internally. I didn't want to keep them global __weak, because some tests use uprobe's ref counter offset (to test USDT-like logic) which is not compatible with non-refcounted uprobe. So it's nicer to have each test uprobe target local to the file and guaranteed to not be inlined or skipped by the compiler (which can happen with static functions, especially if compiling selftests with -O2). Signed-off-by:Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20220126193058.3390292-1-andrii@kernel.orgSigned-off-by:
-
- 26 Jan, 2022 11 commits
-
-
Yonghong Song authored
Compiling kernel and selftests/bpf with latest llvm like blow: make -j LLVM=1 make -C tools/testing/selftests/bpf -j LLVM=1 I hit the following compilation error: /.../prog_tests/log_buf.c:215:6: error: variable 'log_buf' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized] if (!ASSERT_OK_PTR(raw_btf_data, "raw_btf_data_good")) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /.../prog_tests/log_buf.c:264:7: note: uninitialized use occurs here free(log_buf); ^~~~~~~ /.../prog_tests/log_buf.c:215:2: note: remove the 'if' if its condition is always false if (!ASSERT_OK_PTR(raw_btf_data, "raw_btf_data_good")) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /.../prog_tests/log_buf.c:205:15: note: initialize the variable 'log_buf' to silence this warning char *log_buf; ^ = NULL 1 error generated. Compiler rightfully detected that log_buf is uninitialized in one of failure path as indicated in the above. Proper initialization of 'log_buf' variable fixed the issue. Signed-off-by: -
Stanislav Fomichev authored
Commit dee872e1 ("bpf: Populate kfunc BTF ID sets in struct btf") breaks loading of some modules when CONFIG_DEBUG_INFO_BTF is not set. register_btf_kfunc_id_set returns -ENOENT to the callers when there is no module btf. Let's return 0 (success) instead to let those modules work in !CONFIG_DEBUG_INFO_BTF cases. Acked-by:
Kumar Kartikeya Dwivedi <memxor@gmail.com> Fixes: dee872e1 ("bpf: Populate kfunc BTF ID sets in struct btf") Signed-off-by:
-
Felix Maurer authored
Originally, the kernel strictly checked the size of the optval in getsockopt(TCP_ZEROCOPY_RECEIVE) to be equal to sizeof(struct tcp_zerocopy_receive). With c8856c05, this was changed to allow optvals of different sizes. The bpf code in the sockopt_sk test was still performing the strict size check. This fix adapts the kernel behavior from c8856c05 in the selftest, i.e., just check if the required fields are there. Fixes: 9cacf81f ("bpf: Remove extra lock_sock for TCP_ZEROCOPY_RECEIVE") Signed-off-by:
Felix Maurer <fmaurer@redhat.com> Reviewed-by:
-
Alexei Starovoitov authored
Andrii Nakryiko says: ==================== Another batch of simple deprecations. One of the last few, hopefully, as we are getting close to deprecating all the planned APIs/features. See individual patches for details. v1->v2: - rebased on latest bpf-next, fixed Closes: reference. ==================== Signed-off-by: -
Andrii Nakryiko authored
bpf_program__set_<type>() APIs are deprecated, use generic bpf_program__set_type() APIs instead. Signed-off-by:
-
Andrii Nakryiko authored
Use preferred setter and getter APIs instead of deprecated ones. Signed-off-by:
-
Andrii Nakryiko authored
Switch to using preferred setters and getters instead of deprecated ones. Signed-off-by:
-
Andrii Nakryiko authored
Use bpf_program__type() instead of discouraged bpf_program__get_type(). Also switch to bpf_map__set_max_entries() instead of bpf_map__resize(). Signed-off-by:
-
Andrii Nakryiko authored
Not sure why these APIs were added in the first place instead of a completely generic (and not requiring constantly adding new APIs with each new BPF program type) bpf_program__type() and bpf_program__set_type() APIs. But as it is right now, there are 13 such specialized is_type/set_type APIs, while latest kernel is already at 30+ BPF program types. Instead of completing the set of APIs and keep chasing kernel's bpf_prog_type enum, deprecate existing subset and recommend generic bpf_program__type() and bpf_program__set_type() APIs. Signed-off-by:
-
Andrii Nakryiko authored
Deprecated bpf_map__resize() in favor of bpf_map__set_max_entries() setter. In addition to having a surprising name (users often don't realize that they need to use bpf_map__resize()), the name also implies some magic way of resizing BPF map after it is created, which is clearly not the case. Another minor annoyance is that bpf_map__resize() disallows 0 value for max_entries, which in some cases is totally acceptable (e.g., like for BPF perf buf case to let libbpf auto-create one buffer per each available CPU core). [0] Closes: https://github.com/libbpf/libbpf/issues/304Signed-off-by:
-
Andrii Nakryiko authored
Move a bunch of "getters" into libbpf_legacy.h to keep them there in libbpf 1.0. See [0] for discussion of "Discouraged APIs". These getters don't add any maintenance burden and are simple alias, but they are inconsistent in naming. So keep them in libbpf_legacy.h instead of libbpf.h to "hide" them in favor of preferred getters ([1]). Also add two missing getters: bpf_program__type() and bpf_program__expected_attach_type(). [0] https://github.com/libbpf/libbpf/wiki/Libbpf:-the-road-to-v1.0#handling-deprecation-of-apis-and-functionality [1] Closes: https://github.com/libbpf/libbpf/issues/307Signed-off-by:
-
- 25 Jan, 2022 10 commits
-
-
Andrii Nakryiko authored
Kenta Tada says: ==================== Currently, rcx is read as the fourth parameter of syscall on x86_64. But x86_64 Linux System Call convention uses r10 actually. This commit adds the wrapper for users who want to access to syscall params to analyze the user space. Changelog: ---------- v1 -> v2: - Rebase to current bpf-next https://lore.kernel.org/bpf/20211222213924.1869758-1-andrii@kernel.org/ v2 -> v3: - Modify the definition of SYSCALL macros for only targeted archs. - Define __BPF_TARGET_MISSING variants for completeness. - Remove CORE variants. These macros will not be used. - Add a selftest. v3 -> v4: - Modify a selftest not to use serial tests. - Modify a selftest to use ASSERT_EQ(). - Extract syscall wrapper for all the other tests. - Add CORE variants. v4 -> v5: - Modify the CORE variant macro not to read memory directly. - Remove the unnecessary comment. - Add a selftest for the CORE variant. ==================== Signed-off-by:
-
Kenta Tada authored
Add a selftest to verify the behavior of PT_REGS_xxx and the CORE variant. Signed-off-by:
Kenta Tada <Kenta.Tada@sony.com> Signed-off-by:
-
Kenta Tada authored
Currently, rcx is read as the fourth parameter of syscall on x86_64. But x86_64 Linux System Call convention uses r10 actually. This commit adds the wrapper for users who want to access to syscall params to analyze the user space. Signed-off-by:
-
Kenta Tada authored
Extract the helper to set up SYS_PREFIX for fentry and kprobe selftests that use __x86_sys_* attach functions. Suggested-by:
-
Christy Lee authored
Mark bpf_object__open_xattr() as deprecated, use bpf_object__open_file() instead. [0] Closes: https://github.com/libbpf/libbpf/issues/287Signed-off-by:
Christy Lee <christylee@fb.com> Signed-off-by:
-
Andrii Nakryiko authored
Christy Lee says: ==================== Deprecate bpf_object__open_buffer() API, replace all usage with bpf_object__open_mem(). ==================== Signed-off-by: -
Christy Lee authored
bpf_object__open_buffer() API is deprecated, use the unified opts bpf_object__open_mem() API in perf instead. This requires at least libbpf 0.0.6. Signed-off-by:
-
Christy Lee authored
Deprecate bpf_object__open_buffer() API in favor of the unified opts-based bpf_object__open_mem() API. Signed-off-by:
-
Alexei Starovoitov authored
Kenny Yu says: ==================== This patch series makes the following changes: * Adds a new bpf helper `bpf_copy_from_user_task` to read user space memory from a different task. * Adds the ability to create sleepable bpf iterator programs. As an example of how this will be used, at Meta we are using bpf task iterator programs and this new bpf helper to read C++ async stack traces of a running process for debugging C++ binaries in production. Changes since v6: * Split first patch into two patches: first patch to add support for bpf iterators to use sleepable helpers, and the second to add the new bpf helper. * Simplify implementation of `bpf_copy_from_user_task` based on feedback. * Add to docs that the destination buffer will be zero-ed on error. Changes since v5: * Rename `bpf_access_process_vm` to `bpf_copy_from_user_task`. * Change return value to be all-or-nothing. If we get a partial read, memset all bytes to 0 and return -EFAULT. * Add to docs that the helper can only be used by sleepable BPF programs. * Fix nits in selftests. Changes since v4: * Make `flags` into u64. * Use `user_ptr` arg name to be consistent with `bpf_copy_from_user`. * Add an extra check in selftests to verify access_process_vm calls succeeded. Changes since v3: * Check if `flags` is 0 and return -EINVAL if not. * Rebase on latest bpf-next branch and fix merge conflicts. Changes since v2: * Reorder arguments in `bpf_access_process_vm` to match existing related bpf helpers (e.g. `bpf_probe_read_kernel`, `bpf_probe_read_user`, `bpf_copy_from_user`). * `flags` argument is provided for future extensibility and is not currently used, and we always invoke `access_process_vm` with no flags. * Merge bpf helper patch and `bpf_iter_run_prog` patch together for better bisectability in case of failures. * Clean up formatting and comments in selftests. Changes since v1: * Fixed "Invalid wait context" issue in `bpf_iter_run_prog` by using `rcu_read_lock_trace()` for sleepable bpf iterator programs. ==================== Signed-off-by: -
Kenny Yu authored
This adds a test for bpf iterator programs to make use of sleepable bpf helpers. Signed-off-by:
Kenny Yu <kennyyu@fb.com> Acked-by:
-
