Before the offending commit in msm_atomic_commit_tail wait_flush was
called once per frame, after the commit was submitted. After it
wait_flush is also called at the beginning to ensure previous
potentially async commits are done.

For cmd panels the source of wait_flush is a ping-pong irq notifying
a completion. The completion needs to be notified with complete_all so
multiple waiting parties (new async committers) can proceed.
Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Suggested-by: Rob Clark <robdclark@gmail.com>
Fixes: 2d99ced7 ("drm/msm: async commit support")
Signed-off-by: Rob Clark <robdclark@chromium.org>

The previous registers were *almost* correct, but instead of
PHYs, they were pointing at DSI PLLs, resulting in the PHY id
autodetection failing miserably.

Fixes: dcefc117 ("drm/msm/dsi: Add support for msm8x94")
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

SM8250 has quite unique qseed lut type: qseed3lite, which is a
lightweight version of qseed3 scaler.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

There is HPD unplug interrupts missed at scenario of an irq_hpd
followed by unplug interrupts with around 10 ms in between.
Since both AUX_SW_RESET and DP_SW_RESET clear pending HPD interrupts,
irq_hpd handler should not issues either aux or sw reset to avoid
following unplug interrupt be cleared accidentally. This patch
also postpone handling of irq_hpd until connected state if it
happened at connection pending state.

Changes in V2:
-- add postpone handling of irq_hpd until connected state
-- check DP_TRAINING_1 instead of DP_TRAINING_NONE
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

The call to dpu_encoder_phys_cmd_prepare_for_kickoff is useless as
it's unused because the serialize_wait4pp variable is never set to
true by .. anything, literally: remove the call.
While at it, also reduce indentation by inverting the check for
dpu_encoder_phys_cmd_is_master.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

When configuring the tearcheck, the parameters for the engine were
being set mostly as they should've been, but then it wasn't getting
configured to get the vsync indication from the TE GPIO input
because it was assumed that autorefresh could be enabled:
since a previous commit makes sure to disable the autorefresh bit
when committing to the cmd engine, it is now safe to just enable
the vsync pin input at tearcheck setup time (instead of erroneously
never enabling it).

Also, set the right sync_cfg_height to enable the DPU auto-generated
TE signal in order to avoid stalls in the event that we miss one
external TE signal: this will still trigger recovery mechanisms in
case the display is really unreachable.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

When a command mode display is used, it may be retaining the bootloader
configuration which, in most of the cases, enables the autorefresh
feature in order to keep the splash up.

Since there is no autorefresh management in this driver, wire up the
autorefresh ops in the dpu_hw_pingpong and disable the feature when
preparing for cmd commit: instead of disabling it when initializing
the command mode, this road was chosen as to open future possibility
of enabling and managing the autorefresh feature in the driver.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

The DSPP_BLK macro was ad-hoc made for SC7180, but this is wrong
because not all of the DPU DSPP versions can use the same DSPP block
configuration, and not all of them have got the same features.

For this reason, add two more params to the DSPP_BLK macro, so that
it is possible to specify the feature mask and the sblk config for
each DSPP.

Fixes: 4259ff7a ("drm/msm/dpu: add support for pcc color block in dpu driver")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

Not all DPU interface sub-block versions need the same value for
prog_fetch_lines_worst_case: add this to the INTF_BLK macro, so
that it becomes possible to vary it for other INTF versions.

For example, this is needed to implement support for older SoCs,
like MSM8998 and SDM630/660 and most probably will also be needed
for future SoCs.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

Not all DPU versions that are supported in this driver are supposed
to have a 8-Levels VIG QoS setting.
Move this flag to SDM845 and SC7180 specific masks.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

On DPUs prior to version 4 the VBIF_XINL_QOS_LVL_REMAP_000 register
is at 0x570 offset from vbif base instead of 0x590, due to the
VBIF_XINL_QOS_RP_REMAP_000 having less instances (less possible XINs).
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

Port over the command from downstream to prevent undefined
behaviour.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

Port over the command from downstream to prevent undefined
behaviour.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

The upstream API for some reason uses logbase2 instead of
just passing the argument as-is, whereas downstream CAF
kernel does the latter.

Hence, a mistake has been made when porting:
4 is the value that's supposed to be passed, but
log2(4) = 2. Changing the value to 16 (= 2^4) fixes
the issue.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

Resetting the VBIF before power collapse is done to avoid getting
bogus FIFO entries during the suspend sequence or subsequent resume,
but this is doable only on Adreno 510 and Adreno 530, as the other
units will tendentially lock up.
Especially on Adreno 508, the GPU will show lockups and very bad
slownesses after processing the first frame.

Avoiding to execute the RBBM SW Reset before suspend will stop the
lockup issue from happening on at least Adreno 508/509/512.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

The Adreno 508/509/512 GPUs are stripped versions of the Adreno
5xx found in the mid-end SoCs such as SDM630, SDM636, SDM660 and
SDA variants; these SoCs are usually provided with ZAP firmwares,
but they have no available GPMU.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Tested-by: Martin Botka <martin.botka1@gmail.com>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

The "main" if branch where we program the other registers for the
Adreno 5xx family of GPUs should not contain the PC_DBG_ECO_CNTL
register programming because this has logical similarity
differences from all the others.

A later commit will show the entire sense of this.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

The PC_DBG_ECO_CNTL register on the Adreno A5xx family gets
programmed to some different values on a per-model basis.
At least, this is what we intend to do here;

Unfortunately, though, this register is being overwritten with a
static magic number, right after applying the GPU-specific
configuration (including the GPU-specific quirks) and that is
effectively nullifying the efforts.

Let's remove the redundant and wrong write to the PC_DBG_ECO_CNTL
register in order to retain the wanted configuration for the
target GPU.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

A6XX GPUs have support for last level cache(LLC) also known
as system cache and need to set the bus attributes to
use it. Currently we use a generic adreno iommu address space
implementation which are also used by older GPU generations
which do not have LLC and might introduce issues accidentally
and is not clean in a way that anymore additions of GPUs
supporting LLC would have to be guarded under ifdefs. So keep
the generic code separate and make the address space creation
A6XX specific. We also have a helper to set the llc attributes
so that if the newer GPU generations do support them, we can
use it instead of open coding domain attribute setting for each
GPU.
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

Domain attribute setting for LLCC is guarded by !IS_ERR
check which works fine only when CONFIG_QCOM_LLCC=y but
when it is disabled, the LLCC apis return NULL and that
is not handled by IS_ERR check. Due to this, domain attribute
for LLCC will be set even on GPUs which do not support it
and cause issues, so correct this by using IS_ERR_OR_NULL
checks appropriately. Meanwhile also cleanup comment block
and remove unwanted blank line.

Fixes: 00fd44a1 ("drm/msm: Only enable A6xx LLCC code on A6xx")
Fixes: 474dadb8 ("drm/msm/a6xx: Add support for using system cache(LLC)")
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

On at least MSM8998 it's possible to find Adreno 540.0 and 540.1
but I have never found any 540.2. In any case, the patchids 0-1
for A540 are completely supported by this driver and there is no
reason to disallow probing them (as they also share the same
firmware names).

Besides that, the patchid number is also used in the a5xx_power.c
function a540_lm_setup to disable the battery current limiter,
which makes faking the Adreno patchid to .2 (which would anyway
be sad) useless and even producing breakages.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

The msm_gem_get_iova should be guarded with gpu != NULL and not aspace
!= NULL, because aspace is NULL when using vram carveout.

Fixes: 933415e2 ("drm/msm: Add support for private address space instances")
Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Tested-by: Alexey Minnekhanov <alexeymin@postmarketos.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

Some GPUs support different max frequencies depending on the platform.
To identify the correct variant, we should check the gpu speedbin
fuse value. Add support for this speedbin detection to a6xx family
along with the required fuse details for a618 gpu.
Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

Pull arch/sh updates from Rich Felker:
 "Cleanup and warning fixes"

* tag 'sh-for-5.11' of git://git.libc.org/linux-sh:
  sh/intc: Restore devm_ioremap() alignment
  sh: mach-sh03: remove duplicate include
  arch: sh: remove duplicate include
  sh: Drop ARCH_NR_GPIOS definition
  sh: Remove unused HAVE_COPY_THREAD_TLS macro
  sh: remove CONFIG_IDE from most defconfig
  sh: mm: Convert to DEFINE_SHOW_ATTRIBUTE
  sh: intc: Convert to DEFINE_SHOW_ATTRIBUTE
  arch/sh: hyphenate Non-Uniform in Kconfig prompt
  sh: dma: fix kconfig dependency for G2_DMA

Pull io_uring fixes from Jens Axboe:
 "Still need a final cancelation fix that isn't quite done done,
  expected in the next day or two. That said, this contains:

   - Wakeup fix for IOPOLL requests

   - SQPOLL split close op handling fix

   - Ensure that any use of io_uring fd itself is marked as inflight

   - Short non-regular file read fix (Pavel)

   - Fix up bad false positive warning (Pavel)

   - SQPOLL fixes (Pavel)

   - In-flight removal fix (Pavel)"

* tag 'io_uring-5.11-2021-01-24' of git://git.kernel.dk/linux-block:
  io_uring: account io_uring internal files as REQ_F_INFLIGHT
  io_uring: fix sleeping under spin in __io_clean_op
  io_uring: fix short read retries for non-reg files
  io_uring: fix SQPOLL IORING_OP_CLOSE cancelation state
  io_uring: fix skipping disabling sqo on exec
  io_uring: fix uring_flush in exit_files() warning
  io_uring: fix false positive sqo warning on flush
  io_uring: iopoll requests should also wake task ->in_idle state

Pull block fixes from Jens Axboe:

 - NVMe pull request from Christoph:
      - fix a status code in nvmet (Chaitanya Kulkarni)
      - avoid double completions in nvme-rdma/nvme-tcp (Chao Leng)
      - fix the CMB support to cope with NVMe 1.4 controllers (Klaus Jensen)
      - fix PRINFO handling in the passthrough ioctl (Revanth Rajashekar)
      - fix a double DMA unmap in nvme-pci

 - lightnvm error path leak fix (Pan)

 - MD pull request from Song:
      - Flush request fix (Xiao)

* tag 'block-5.11-2021-01-24' of git://git.kernel.dk/linux-block:
  lightnvm: fix memory leak when submit fails
  nvme-pci: fix error unwind in nvme_map_data
  nvme-pci: refactor nvme_unmap_data
  md: Set prev_flush_start and flush_bio in an atomic way
  nvmet: set right status on error in id-ns handler
  nvme-pci: allow use of cmb on v1.4 controllers
  nvme-tcp: avoid request double completion for concurrent nvme_tcp_timeout
  nvme-rdma: avoid request double completion for concurrent nvme_rdma_timeout
  nvme: check the PRINFO bit before deciding the host buffer length

Merge misc fixes from Andrew Morton:
 "18 patches.

  Subsystems affected by this patch series: mm (pagealloc, memcg, kasan,
  memory-failure, and highmem), ubsan, proc, and MAINTAINERS"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  MAINTAINERS: add a couple more files to the Clang/LLVM section
  proc_sysctl: fix oops caused by incorrect command parameters
  powerpc/mm/highmem: use __set_pte_at() for kmap_local()
  mips/mm/highmem: use set_pte() for kmap_local()
  mm/highmem: prepare for overriding set_pte_at()
  sparc/mm/highmem: flush cache and TLB
  mm: fix page reference leak in soft_offline_page()
  ubsan: disable unsigned-overflow check for i386
  kasan, mm: fix resetting page_alloc tags for HW_TAGS
  kasan, mm: fix conflicts with init_on_alloc/free
  kasan: fix HW_TAGS boot parameters
  kasan: fix incorrect arguments passing in kasan_add_zero_shadow
  kasan: fix unaligned address is unhandled in kasan_remove_zero_shadow
  mm: fix numa stats for thp migration
  mm: memcg: fix memcg file_dirty numa stat
  mm: memcg/slab: optimize objcg stock draining
  mm: fix initialization of struct page for holes in memory layout
  x86/setup: don't remove E820_TYPE_RAM for pfn 0

Pull char/misc driver fixes from Greg KH:
 "Here are some small char/misc driver fixes for 5.11-rc5:

   - habanalabs driver fixes

   - phy driver fixes

   - hwtracing driver fixes

   - rtsx cardreader driver fix

  All of these have been in linux-next with no reported issues"

* tag 'char-misc-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  misc: rtsx: init value of aspm_enabled
  habanalabs: disable FW events on device removal
  habanalabs: fix backward compatibility of idle check
  habanalabs: zero pci counters packet before submit to FW
  intel_th: pci: Add Alder Lake-P support
  stm class: Fix module init return on allocation failure
  habanalabs: prevent soft lockup during unmap
  habanalabs: fix reset process in case of failures
  habanalabs: fix dma_addr passed to dma_mmap_coherent
  phy: mediatek: allow compile-testing the dsi phy
  phy: cpcap-usb: Fix warning for missing regulator_disable
  PHY: Ingenic: fix unconditional build of phy-ingenic-usb

Merge tag 'driver-core-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core fixes from Greg KH:
 "Here are some small driver core fixes for 5.11-rc5 that resolve some
  reported problems:

   - revert of a -rc1 patch that was causing problems with some machines

   - device link device name collision problem fix (busses only have to
     name devices unique to their bus, not unique to all busses)

   - kernfs splice bugfixes to resolve firmware loading problems for
     Qualcomm systems.

   - other tiny driver core fixes for minor issues reported.

  All of these have been in linux-next with no reported problems"

* tag 'driver-core-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  driver core: Fix device link device name collision
  driver core: Extend device_is_dependent()
  kernfs: wire up ->splice_read and ->splice_write
  kernfs: implement ->write_iter
  kernfs: implement ->read_iter
  Revert "driver core: Reorder devices on successful probe"
  Driver core: platform: Add extra error check in devm_platform_get_irqs_affinity()
  drivers core: Free dma_range_map when driver probe failed

Pull staging/IIO driver fixes from Greg KH:
 "Here are some IIO driver fixes for 5.11-rc5 to resolve some reported
  problems.

  Nothing major, just a few small fixes, all of these have been in
  linux-next for a while and full details are in the shortlog"

* tag 'staging-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  iio: sx9310: Fix semtech,avg-pos-strength setting when > 16
  iio: common: st_sensors: fix possible infinite loop in st_sensors_irq_thread
  iio: ad5504: Fix setting power-down state
  counter:ti-eqep: remove floor
  drivers: iio: temperature: Add delay after the addressed reset command in mlx90632.c
  iio: adc: ti_am335x_adc: remove omitted iio_kfifo_free()
  dt-bindings: iio: accel: bma255: Fix bmc150/bmi055 compatible
  iio: sx9310: Off by one in sx9310_read_thresh()

Pull tty/serial fixes from Greg KH:
 "Here are three small tty/serial fixes for 5.11-rc5 to resolve reported
  problems:

   - two patches to fix up writing to ttys with splice

   - mvebu-uart driver fix for reported problem

  All of these have been in linux-next with no reported problems"

* tag 'tty-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: fix up hung_up_tty_write() conversion
  tty: implement write_iter
  serial: mvebu-uart: fix tx lost characters at power off

Pull USB fixes from Greg KH:
 "Here are some small USB driver fixes for 5.11-rc5.  They resolve:

   - xhci issues for some reported problems

   - ehci driver issue for one specific device

   - USB gadget fixes for some reported problems

   - cdns3 driver fixes for issues reported

   - MAINTAINERS file update

   - thunderbolt minor fix

  All of these have been in linux-next with no reported issues"

* tag 'usb-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: bdc: Make bdc pci driver depend on BROKEN
  xhci: tegra: Delay for disabling LFPS detector
  xhci: make sure TRB is fully written before giving it to the controller
  usb: udc: core: Use lock when write to soft_connect
  USB: gadget: dummy-hcd: Fix errors in port-reset handling
  usb: gadget: aspeed: fix stop dma register setting.
  USB: ehci: fix an interrupt calltrace error
  ehci: fix EHCI host controller initialization sequence
  MAINTAINERS: update Peter Chen's email address
  thunderbolt: Drop duplicated 0x prefix from format string
  MAINTAINERS: Update address for Cadence USB3 driver
  usb: cdns3: imx: improve driver .remove API
  usb: cdns3: imx: fix can't create core device the second time issue
  usb: cdns3: imx: fix writing read-only memory issue

The K: entry should ensure that Nick and I always get CC'd on patches that
touch these files but it is better to be explicit rather than implicit.

Link: https://lkml.kernel.org/r/20210114004059.2129921-1-natechancellor@gmail.comSigned-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The process_sysctl_arg() does not check whether val is empty before
invoking strlen(val).  If the command line parameter () is incorrectly
configured and val is empty, oops is triggered.

For example:
  "hung_task_panic=1" is incorrectly written as "hung_task_panic", oops is
  triggered. The call stack is as follows:
    Kernel command line: .... hung_task_panic
    ......
    Call trace:
    __pi_strlen+0x10/0x98
    parse_args+0x278/0x344
    do_sysctl_args+0x8c/0xfc
    kernel_init+0x5c/0xf4
    ret_from_fork+0x10/0x30

To fix it, check whether "val" is empty when "phram" is a sysctl field.
Error codes are returned in the failure branch, and error logs are
generated by parse_args().

Link: https://lkml.kernel.org/r/20210118133029.28580-1-nixiaoming@huawei.com
Fixes: 3db978d4 ("kernel/sysctl: support setting sysctl parameters from kernel command line")
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: <stable@vger.kernel.org>	[5.8+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The original PowerPC highmem mapping function used __set_pte_at() to
denote that the mapping is per CPU.  This got lost with the conversion
to the generic implementation.

Override the default map function.

Link: https://lkml.kernel.org/r/20210112170411.281464308@linutronix.de
Fixes: 47da42b2 ("powerpc/mm/highmem: Switch to generic kmap atomic")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

set_pte_at() on MIPS invokes update_cache() which might recurse into
kmap_local().

Use set_pte() like the original MIPS highmem implementation did.

Link: https://lkml.kernel.org/r/20210112170411.187513575@linutronix.de
Fixes: a4c33e83 ("mips/mm/highmem: Switch to generic kmap atomic")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reported-by: Paul Cercueil <paul@crapouillou.net>
Reported-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The generic kmap_local() map function uses set_pte_at(), but MIPS requires
set_pte() and PowerPC wants __set_pte_at().

Provide arch_kmap_local_set_pte() and default it to set_pte_at().

Link: https://lkml.kernel.org/r/20210112170411.056306194@linutronix.deSigned-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Patch series "mm/highmem: Fix fallout from generic kmap_local
conversions".

The kmap_local conversion wreckaged sparc, mips and powerpc as it missed
some of the details in the original implementation.

This patch (of 4):

The recent conversion to the generic kmap_local infrastructure failed to
assign the proper pre/post map/unmap flush operations for sparc.

Sparc requires cache flush before map/unmap and tlb flush afterwards.

Link: https://lkml.kernel.org/r/20210112170136.078559026@linutronix.de
Link: https://lkml.kernel.org/r/20210112170410.905976187@linutronix.de
Fixes: 3293efa9 ("sparc/mm/highmem: Switch to generic kmap atomic")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reported-by: Andreas Larsson <andreas@gaisler.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The conversion to move pfn_to_online_page() internal to
soft_offline_page() missed that the get_user_pages() reference taken by
the madvise() path needs to be dropped when pfn_to_online_page() fails.

Note the direct sysfs-path to soft_offline_page() does not perform a
get_user_pages() lookup.

When soft_offline_page() is handed a pfn_valid() && !pfn_to_online_page()
pfn the kernel hangs at dax-device shutdown due to a leaked reference.

Link: https://lkml.kernel.org/r/161058501210.1840162.8108917599181157327.stgit@dwillia2-desk3.amr.corp.intel.com
Fixes: feec24a6 ("mm, soft-offline: convert parameter to pfn")
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Qian Cai <cai@lca.pw>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>