[ Upstream commit ea751227 ]

During randconfig builds, I occasionally run into an invalid configuration
of the freescale FIQ sound support:

WARNING: unmet direct dependencies detected for SND_SOC_IMX_PCM_FIQ
  Depends on [m]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_IMX_SOC [=m]
  Selected by [y]:
  - SND_SOC_FSL_SPDIF [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_IMX_SOC [=m]!=n && (MXC_TZIC [=n] || MXC_AVIC [=y])

sound/soc/fsl/imx-ssi.o: In function `imx_ssi_remove':
imx-ssi.c:(.text+0x28): undefined reference to `imx_pcm_fiq_exit'
sound/soc/fsl/imx-ssi.o: In function `imx_ssi_probe':
imx-ssi.c:(.text+0xa64): undefined reference to `imx_pcm_fiq_init'

The Kconfig warning is a result of the symbol being defined inside of
the "if SND_IMX_SOC" block, and is otherwise harmless. The link error
is more tricky and happens with SND_SOC_IMX_SSI=y, which may or may not
imply FIQ support. However, if SND_SOC_FSL_SSI is set to =m at the same
time, that selects SND_SOC_IMX_PCM_FIQ as a loadable module dependency,
which then causes a link failure from imx-ssi.

The solution here is to make SND_SOC_IMX_PCM_FIQ built-in whenever
one of its potential users is built-in.

Fixes: ff40260f ("ASoC: fsl: refine DMA/FIQ dependencies")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 5d085ec0 ]

This is detected by Coverity scan: CID: 1440481
Signed-off-by: Bo YU <tsu.yubo@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 30180e84 ]

If the hdmi codec startup fails, it should clear the current_substream
pointer to free the device. This is properly done for the audio_startup()
callback but for snd_pcm_hw_constraint_eld().

Make sure the pointer cleared if an error is reported.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit f9133088 ]

GCC 8 contains a number of new warnings as well as enhancements to existing
checkers. The warning - Wstringop-truncation - warns for calls to bounded
string manipulation functions such as strncat, strncpy, and stpncpy that
may either truncate the copied string or leave the destination unchanged.

In our case the destination string length (32 bytes) is much shorter than
the source string (64 bytes) which causes this warning to show up. In
general the destination has to be at least a byte larger than the length
of the source string with strncpy for this warning not to showup.

This can be easily fixed by using strlcpy instead which already does the
truncation to the string. Documentation for this function can be
found here:

https://elixir.bootlin.com/linux/latest/source/lib/string.c#L141

Fixes: 1738cd3e ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit f030e419 ]

Following kernel panic is seen during DMA driver unload->load sequence
==========================================================================
Unable to handle kernel paging request at virtual address ffffff8001198880
Internal error: Oops: 86000007 [#1] PREEMPT SMP
CPU: 0 PID: 5907 Comm: HwBinder:4123_1 Tainted: G C 4.9.128-tegra-g065839f
Hardware name: galen (DT)
task: ffffffc3590d1a80 task.stack: ffffffc3d0678000
PC is at 0xffffff8001198880
LR is at of_dma_request_slave_channel+0xd8/0x1f8
pc : [<ffffff8001198880>] lr : [<ffffff8008746f30>] pstate: 60400045
sp : ffffffc3d067b710
x29: ffffffc3d067b710 x28: 000000000000002f
x27: ffffff800949e000 x26: ffffff800949e750
x25: ffffff800949e000 x24: ffffffbefe817d84
x23: ffffff8009f77cb0 x22: 0000000000000028
x21: ffffffc3ffda49c8 x20: 0000000000000029
x19: 0000000000000001 x18: ffffffffffffffff
x17: 0000000000000000 x16: ffffff80082b66a0
x15: ffffff8009e78250 x14: 000000000000000a
x13: 0000000000000038 x12: 0101010101010101
x11: 0000000000000030 x10: 0101010101010101
x9 : fffffffffffffffc x8 : 7f7f7f7f7f7f7f7f
x7 : 62ff726b6b64622c x6 : 0000000000008064
x5 : 6400000000000000 x4 : ffffffbefe817c44
x3 : ffffffc3ffda3e08 x2 : ffffff8001198880
x1 : ffffffc3d48323c0 x0 : ffffffc3d067b788

Process HwBinder:4123_1 (pid: 5907, stack limit = 0xffffffc3d0678028)
Call trace:
[<ffffff8001198880>] 0xffffff8001198880
[<ffffff80087459f8>] dma_request_chan+0x50/0x1f0
[<ffffff8008745bc0>] dma_request_slave_channel+0x28/0x40
[<ffffff8001552c44>] tegra_alt_pcm_open+0x114/0x170
[<ffffff8008d65fa4>] soc_pcm_open+0x10c/0x878
[<ffffff8008d18618>] snd_pcm_open_substream+0xc0/0x170
[<ffffff8008d1878c>] snd_pcm_open+0xc4/0x240
[<ffffff8008d189e0>] snd_pcm_playback_open+0x58/0x80
[<ffffff8008cfc6d4>] snd_open+0xb4/0x178
[<ffffff8008250628>] chrdev_open+0xb8/0x1d0
[<ffffff8008246fdc>] do_dentry_open+0x214/0x318
[<ffffff80082485d0>] vfs_open+0x58/0x88
[<ffffff800825bce0>] do_last+0x450/0xde0
[<ffffff800825c718>] path_openat+0xa8/0x368
[<ffffff800825dd84>] do_filp_open+0x8c/0x110
[<ffffff8008248a74>] do_sys_open+0x164/0x220
[<ffffff80082b66dc>] compat_SyS_openat+0x3c/0x50
[<ffffff8008083040>] el0_svc_naked+0x34/0x38
---[ end trace 67e6d544e65b5145 ]---
Kernel panic - not syncing: Fatal exception
==========================================================================

In device probe(), of_dma_controller_register() registers DMA controller.
But when driver is removed, this is not freed. During driver reload this
results in data abort and kernel panic. Add of_dma_controller_free() in
driver remove path to fix the issue.

Fixes: f46b1957 ("dmaengine: tegra-adma: Add support for Tegra210 ADMA")
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 9e4be8d0 ]

The SD Physical Layer Spec says the following: Since the SD Memory Card
shall support at least the two bus modes 1-bit or 4-bit width, then any SD
Card shall set at least bits 0 and 2 (SD_BUS_WIDTH="0101").

This change verifies the card has specified a bus width.

AMD SDHC Device 7806 can get into a bad state after a card disconnect
where anything transferred via the DATA lines will always result in a
zero filled buffer. Currently the driver will continue without error if
the HC is in this condition. A block device will be created, but reading
from it will result in a zero buffer. This makes it seem like the SD
device has been erased, when in actuality the data is never getting
copied from the DATA lines to the data buffer.

SCR is the first command in the SD initialization sequence that uses the
DATA lines. By checking that the response was invalid, we can abort
mounting the card.
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit a3147770 ]

BUG: unable to handle kernel paging request at ffffffffa016a270
PGD 3270067 P4D 3270067 PUD 3271063 PMD 230bbd067 PTE 0
Oops: 0000 [#1
CPU: 0 PID: 6134 Comm: modprobe Not tainted 5.1.0+ #33
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014
RIP: 0010:atomic_notifier_chain_register+0x24/0x60
Code: 1f 80 00 00 00 00 55 48 89 e5 41 54 49 89 f4 53 48 89 fb e8 ae b4 38 01 48 8b 53 38 48 8d 4b 38 48 85 d2 74 20 45 8b 44 24 10 <44> 3b 42 10 7e 08 eb 13 44 39 42 10 7c 0d 48 8d 4a 08 48 8b 52 08
RSP: 0018:ffffc90000e2bc60 EFLAGS: 00010086
RAX: 0000000000000292 RBX: ffffffff83467240 RCX: ffffffff83467278
RDX: ffffffffa016a260 RSI: ffffffff83752140 RDI: ffffffff83467240
RBP: ffffc90000e2bc70 R08: 0000000000000000 R09: 0000000000000001
R10: 0000000000000000 R11: 00000000014fa61f R12: ffffffffa01c8260
R13: ffff888231091e00 R14: 0000000000000000 R15: ffffc90000e2be78
FS:  00007fbd8d7cd540(0000) GS:ffff888237a00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffa016a270 CR3: 000000022c7e3000 CR4: 00000000000006f0
Call Trace:
 register_inet6addr_notifier+0x13/0x20
 cxgb4_init_module+0x6c/0x1000 [cxgb4
 ? 0xffffffffa01d7000
 do_one_initcall+0x6c/0x3cc
 ? do_init_module+0x22/0x1f1
 ? rcu_read_lock_sched_held+0x97/0xb0
 ? kmem_cache_alloc_trace+0x325/0x3b0
 do_init_module+0x5b/0x1f1
 load_module+0x1db1/0x2690
 ? m_show+0x1d0/0x1d0
 __do_sys_finit_module+0xc5/0xd0
 __x64_sys_finit_module+0x15/0x20
 do_syscall_64+0x6b/0x1d0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

If pci_register_driver fails, register inet6addr_notifier is
pointless. This patch fix the error path in cxgb4_init_module.

Fixes: b5a02f50 ("cxgb4 : Update ipv6 address handling api")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 7881ef3f ]

Under certain conditions, lru_count may drop below zero resulting in
a large amount of log spam like this:

vmscan: shrink_slab: gfs2_dump_glock+0x3b0/0x630 [gfs2] \
    negative objects to delete nr=-1

This happens as follows:
1) A glock is moved from lru_list to the dispose list and lru_count is
   decremented.
2) The dispose function calls cond_resched() and drops the lru lock.
3) Another thread takes the lru lock and tries to add the same glock to
   lru_list, checking if the glock is on an lru list.
4) It is on a list (actually the dispose list) and so it avoids
   incrementing lru_count.
5) The glock is moved to lru_list.
5) The original thread doesn't dispose it because it has been re-added
   to the lru list but the lru_count has still decreased by one.

Fix by checking if the LRU flag is set on the glock rather than checking
if the glock is on some list and rearrange the code so that the LRU flag
is added/removed precisely when the glock is added/removed from lru_list.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

This reverts commit 038ec2c1.

There is currently no corresponding patch in master due to additional
changes that would be significantly different from plain revert in the
respective stable branch.

The range argument was not handled correctly and could cause trim to
overlap allocated areas or reach beyond the end of the device. The
address space that fitrim normally operates on is in logical
coordinates, while the discards are done on the physical device extents.
This distinction cannot be made with the current ioctl interface and
caused the confusion.

The bug depends on the layout of block groups and does not always
happen. The whole-fs trim (run by default by the fstrim tool) is not
affected.
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ba4aa02b upstream.

So that we reduce the difference of tools/include/linux/bitops.h to the
original kernel file, include/linux/bitops.h, trying to remove the need
to define BITS_PER_LONG, to avoid clashes with asm/bitsperlong.h.

And the things removed from tools/include/linux/bitops.h are really in
linux/bits.h, so that we can have a copy and then
tools/perf/check_headers.sh will tell us when new stuff gets added to
linux/bits.h so that we can check if it is useful and if any adjustment
needs to be done to the tools/{include,arch}/ copies.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-y1sqyydvfzo0bjjoj4zsl562@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
[bwh: Backported to 4.9 as dependency of "x86/msr-index: Cleanup bit defines";
 adjusted context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 6dcca6df upstream.

When we switched to the kernel's roundup_pow_of_two we forgot to remove
this include from util.h, do it now.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 91529834 ("perf evlist: Use roundup_pow_of_two")
Link: http://lkml.kernel.org/n/tip-kfye5rxivib6155cltx0bw4h@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
[bwh: Backported to 4.9 as dependency of "tools include: Adopt linux/bits.h";
 adjusted context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 09ac2694 upstream.

Syzkaller report this:

[ 1213.468581] BUG: unable to handle kernel paging request at fffffbfff83bf338
[ 1213.469530] #PF error: [normal kernel read fault]
[ 1213.469530] PGD 237fe4067 P4D 237fe4067 PUD 237e60067 PMD 1c868b067 PTE 0
[ 1213.473514] Oops: 0000 [#1] SMP KASAN PTI
[ 1213.473514] CPU: 0 PID: 6321 Comm: syz-executor.0 Tainted: G         C        5.1.0-rc3+ #8
[ 1213.473514] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[ 1213.473514] RIP: 0010:strcmp+0x31/0xa0
[ 1213.473514] Code: 00 00 00 00 fc ff df 55 53 48 83 ec 08 eb 0a 84 db 48 89 ef 74 5a 4c 89 e6 48 89 f8 48 89 fa 48 8d 6f 01 48 c1 e8 03 83 e2 07 <42> 0f b6 04 28 38 d0 7f 04 84 c0 75 50 48 89 f0 48 89 f2 0f b6 5d
[ 1213.473514] RSP: 0018:ffff8881f2b7f950 EFLAGS: 00010246
[ 1213.473514] RAX: 1ffffffff83bf338 RBX: ffff8881ea6f7240 RCX: ffffffff825350c6
[ 1213.473514] RDX: 0000000000000000 RSI: ffffffffc1ee19c0 RDI: ffffffffc1df99c0
[ 1213.473514] RBP: ffffffffc1df99c1 R08: 0000000000000001 R09: 0000000000000004
[ 1213.473514] R10: 0000000000000000 R11: ffff8881de353f00 R12: ffff8881ee727900
[ 1213.473514] R13: dffffc0000000000 R14: 0000000000000001 R15: ffffffffc1eeaaf0
[ 1213.473514] FS:  00007fa66fa01700(0000) GS:ffff8881f7200000(0000) knlGS:0000000000000000
[ 1213.473514] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1213.473514] CR2: fffffbfff83bf338 CR3: 00000001ebb9e005 CR4: 00000000007606f0
[ 1213.473514] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1213.473514] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 1213.473514] PKRU: 55555554
[ 1213.473514] Call Trace:
[ 1213.473514]  led_trigger_register+0x112/0x3f0
[ 1213.473514]  led_trigger_register_simple+0x7a/0x110
[ 1213.473514]  ? 0xffffffffc1c10000
[ 1213.473514]  at76_mod_init+0x77/0x1000 [at76c50x_usb]
[ 1213.473514]  do_one_initcall+0xbc/0x47d
[ 1213.473514]  ? perf_trace_initcall_level+0x3a0/0x3a0
[ 1213.473514]  ? kasan_unpoison_shadow+0x30/0x40
[ 1213.473514]  ? kasan_unpoison_shadow+0x30/0x40
[ 1213.473514]  do_init_module+0x1b5/0x547
[ 1213.473514]  load_module+0x6405/0x8c10
[ 1213.473514]  ? module_frob_arch_sections+0x20/0x20
[ 1213.473514]  ? kernel_read_file+0x1e6/0x5d0
[ 1213.473514]  ? find_held_lock+0x32/0x1c0
[ 1213.473514]  ? cap_capable+0x1ae/0x210
[ 1213.473514]  ? __do_sys_finit_module+0x162/0x190
[ 1213.473514]  __do_sys_finit_module+0x162/0x190
[ 1213.473514]  ? __ia32_sys_init_module+0xa0/0xa0
[ 1213.473514]  ? __mutex_unlock_slowpath+0xdc/0x690
[ 1213.473514]  ? wait_for_completion+0x370/0x370
[ 1213.473514]  ? vfs_write+0x204/0x4a0
[ 1213.473514]  ? do_syscall_64+0x18/0x450
[ 1213.473514]  do_syscall_64+0x9f/0x450
[ 1213.473514]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 1213.473514] RIP: 0033:0x462e99
[ 1213.473514] Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
[ 1213.473514] RSP: 002b:00007fa66fa00c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[ 1213.473514] RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99
[ 1213.473514] RDX: 0000000000000000 RSI: 0000000020000300 RDI: 0000000000000003
[ 1213.473514] RBP: 00007fa66fa00c70 R08: 0000000000000000 R09: 0000000000000000
[ 1213.473514] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fa66fa016bc
[ 1213.473514] R13: 00000000004bcefa R14: 00000000006f6fb0 R15: 0000000000000004

If usb_register failed, no need to call led_trigger_register_simple.
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 1264b951 ("at76c50x-usb: add driver")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b2c01aab upstream.

Syzkaller report this:

kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN PTI
CPU: 0 PID: 4492 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
RIP: 0010:sysfs_remove_file_ns+0x27/0x70 fs/sysfs/file.c:468
Code: 00 00 00 41 54 55 48 89 fd 53 49 89 d4 48 89 f3 e8 ee 76 9c ff 48 8d 7d 30 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 75 2d 48 89 da 48 b8 00 00 00 00 00 fc ff df 48 8b 6d
RSP: 0018:ffff8881e9d9fc00 EFLAGS: 00010206
RAX: dffffc0000000000 RBX: ffffffff900367e0 RCX: ffffffff81a95952
RDX: 0000000000000006 RSI: ffffc90001405000 RDI: 0000000000000030
RBP: 0000000000000000 R08: fffffbfff1fa22ed R09: fffffbfff1fa22ed
R10: 0000000000000001 R11: fffffbfff1fa22ec R12: 0000000000000000
R13: ffffffffc1abdac0 R14: 1ffff1103d3b3f8b R15: 0000000000000000
FS:  00007fe409dc1700(0000) GS:ffff8881f1200000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b2d721000 CR3: 00000001e98b6005 CR4: 00000000007606f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
 sysfs_remove_file include/linux/sysfs.h:519 [inline]
 driver_remove_file+0x40/0x50 drivers/base/driver.c:122
 pcmcia_remove_newid_file drivers/pcmcia/ds.c:163 [inline]
 pcmcia_unregister_driver+0x7d/0x2b0 drivers/pcmcia/ds.c:209
 ssb_modexit+0xa/0x1b [ssb]
 __do_sys_delete_module kernel/module.c:1018 [inline]
 __se_sys_delete_module kernel/module.c:961 [inline]
 __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961
 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x462e99
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fe409dc0c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0
RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200000c0
RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe409dc16bc
R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff
Modules linked in: ssb(-) 3c59x nvme_core macvlan tap pata_hpt3x3 rt2x00pci null_blk tsc40 pm_notifier_error_inject notifier_error_inject mdio cdc_wdm nf_reject_ipv4 ath9k_common ath9k_hw ath pppox ppp_generic slhc ehci_platform wl12xx wlcore tps6507x_ts ioc4 nf_synproxy_core ide_gd_mod ax25 can_dev iwlwifi can_raw atm tm2_touchkey can_gw can sundance adp5588_keys rt2800mmio rt2800lib rt2x00mmio rt2x00lib eeprom_93cx6 pn533 lru_cache elants_i2c ip_set nfnetlink gameport tipc hampshire nhc_ipv6 nhc_hop nhc_udp nhc_fragment nhc_routing nhc_mobility nhc_dest 6lowpan silead brcmutil nfc mt76_usb mt76 mac80211 iptable_security iptable_raw iptable_mangle iptable_nat nf_nat_ipv4 nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bpfilter ip6_vti ip_gre sit hsr veth vxcan batman_adv cfg80211 rfkill chnl_net caif nlmon vcan bridge stp llc ip6_gre ip6_tunnel tunnel6 tun joydev mousedev serio_raw ide_pci_generic piix floppy ide_core sch_fq_codel ip_tables x_tables ipv6
 [last unloaded: 3c59x]
Dumping ftrace buffer:
   (ftrace buffer empty)
---[ end trace 3913cbf8011e1c05 ]---

In ssb_modinit, it does not fail SSB init when ssb_host_pcmcia_init failed,
however in ssb_modexit, ssb_host_pcmcia_exit calls pcmcia_unregister_driver
unconditionally, which may tigger a NULL pointer dereference issue as above.
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 399500da ("ssb: pick PCMCIA host code support from b43 driver")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit dad7e270 upstream.

syzkaller reported crashes on kfree() called from
vivid_vid_cap_s_selection(). This looks like a simple typo, as
dev->bitmap_cap is allocated with vzalloc() throughout the file.

Fixes: ef834f78 ("[media] vivid: add the video capture and output
parts")
Signed-off-by: Alexander Potapenko <glider@google.com>
Reported-by: Syzbot <syzbot+6c0effb5877f6b0344e2@syzkaller.appspotmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit dea37a97 upstream.

Syzkaller report this:

BUG: KASAN: use-after-free in sysfs_remove_file_ns+0x5f/0x70 fs/sysfs/file.c:468
Read of size 8 at addr ffff8881f59a6b70 by task syz-executor.0/8363

CPU: 0 PID: 8363 Comm: syz-executor.0 Not tainted 5.0.0-rc8+ #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0xfa/0x1ce lib/dump_stack.c:113
 print_address_description+0x65/0x270 mm/kasan/report.c:187
 kasan_report+0x149/0x18d mm/kasan/report.c:317
 sysfs_remove_file_ns+0x5f/0x70 fs/sysfs/file.c:468
 sysfs_remove_file include/linux/sysfs.h:519 [inline]
 driver_remove_file+0x40/0x50 drivers/base/driver.c:122
 usb_remove_newid_files drivers/usb/core/driver.c:212 [inline]
 usb_deregister+0x12a/0x3b0 drivers/usb/core/driver.c:1005
 cpia2_exit+0xa/0x16 [cpia2]
 __do_sys_delete_module kernel/module.c:1018 [inline]
 __se_sys_delete_module kernel/module.c:961 [inline]
 __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961
 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x462e99
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f86f3754c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0
RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000020000300
RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f86f37556bc
R13: 00000000004bcca9 R14: 00000000006f6b48 R15: 00000000ffffffff

Allocated by task 8363:
 set_track mm/kasan/common.c:85 [inline]
 __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:495
 kmalloc include/linux/slab.h:545 [inline]
 kzalloc include/linux/slab.h:740 [inline]
 bus_add_driver+0xc0/0x610 drivers/base/bus.c:651
 driver_register+0x1bb/0x3f0 drivers/base/driver.c:170
 usb_register_driver+0x267/0x520 drivers/usb/core/driver.c:965
 0xffffffffc1b4817c
 do_one_initcall+0xfa/0x5ca init/main.c:887
 do_init_module+0x204/0x5f6 kernel/module.c:3460
 load_module+0x66b2/0x8570 kernel/module.c:3808
 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902
 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 8363:
 set_track mm/kasan/common.c:85 [inline]
 __kasan_slab_free+0x130/0x180 mm/kasan/common.c:457
 slab_free_hook mm/slub.c:1430 [inline]
 slab_free_freelist_hook mm/slub.c:1457 [inline]
 slab_free mm/slub.c:3005 [inline]
 kfree+0xe1/0x270 mm/slub.c:3957
 kobject_cleanup lib/kobject.c:662 [inline]
 kobject_release lib/kobject.c:691 [inline]
 kref_put include/linux/kref.h:67 [inline]
 kobject_put+0x146/0x240 lib/kobject.c:708
 bus_remove_driver+0x10e/0x220 drivers/base/bus.c:732
 driver_unregister+0x6c/0xa0 drivers/base/driver.c:197
 usb_register_driver+0x341/0x520 drivers/usb/core/driver.c:980
 0xffffffffc1b4817c
 do_one_initcall+0xfa/0x5ca init/main.c:887
 do_init_module+0x204/0x5f6 kernel/module.c:3460
 load_module+0x66b2/0x8570 kernel/module.c:3808
 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902
 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

The buggy address belongs to the object at ffff8881f59a6b40
 which belongs to the cache kmalloc-256 of size 256
The buggy address is located 48 bytes inside of
 256-byte region [ffff8881f59a6b40, ffff8881f59a6c40)
The buggy address belongs to the page:
page:ffffea0007d66980 count:1 mapcount:0 mapping:ffff8881f6c02e00 index:0x0
flags: 0x2fffc0000000200(slab)
raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6c02e00
raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff8881f59a6a00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 ffff8881f59a6a80: 00 00 00 00 00 00 00 00 00 00 fc fc fc fc fc fc
>ffff8881f59a6b00: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
                                                             ^
 ffff8881f59a6b80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff8881f59a6c00: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc

cpia2_init does not check return value of cpia2_init, if it failed
in usb_register_driver, there is already cleanup using driver_unregister.
No need call cpia2_usb_cleanup on module exit.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8c40292b upstream.

Syzkaller hit 'WARNING in __alloc_pages_nodemask' bug.

WARNING: CPU: 1 PID: 1473 at mm/page_alloc.c:4377
__alloc_pages_nodemask+0x4da/0x2130
Kernel panic - not syncing: panic_on_warn set ...

Call Trace:
 alloc_pages_current+0xb1/0x1e0
 kmalloc_order+0x1f/0x60
 kmalloc_order_trace+0x1d/0x120
 fb_alloc_cmap_gfp+0x85/0x2b0
 fb_set_user_cmap+0xff/0x370
 do_fb_ioctl+0x949/0xa20
 fb_ioctl+0xdd/0x120
 do_vfs_ioctl+0x186/0x1070
 ksys_ioctl+0x89/0xa0
 __x64_sys_ioctl+0x74/0xb0
 do_syscall_64+0xc8/0x550
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

This is a warning about order >= MAX_ORDER and the order is from
userspace ioctl. Add flag __NOWARN to silence this warning.
Signed-off-by: Jiufei Xue <jiufei.xue@linux.alibaba.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 1b426bac upstream.

hugetlb uses a fault mutex hash table to prevent page faults of the
same pages concurrently.  The key for shared and private mappings is
different.  Shared keys off address_space and file index.  Private keys
off mm and virtual address.  Consider a private mappings of a populated
hugetlbfs file.  A fault will map the page from the file and if needed
do a COW to map a writable page.

Hugetlbfs hole punch uses the fault mutex to prevent mappings of file
pages.  It uses the address_space file index key.  However, private
mappings will use a different key and could race with this code to map
the file page.  This causes problems (BUG) for the page cache remove
code as it expects the page to be unmapped.  A sample stack is:

page dumped because: VM_BUG_ON_PAGE(page_mapped(page))
kernel BUG at mm/filemap.c:169!
...
RIP: 0010:unaccount_page_cache_page+0x1b8/0x200
...
Call Trace:
__delete_from_page_cache+0x39/0x220
delete_from_page_cache+0x45/0x70
remove_inode_hugepages+0x13c/0x380
? __add_to_page_cache_locked+0x162/0x380
hugetlbfs_fallocate+0x403/0x540
? _cond_resched+0x15/0x30
? __inode_security_revalidate+0x5d/0x70
? selinux_file_permission+0x100/0x130
vfs_fallocate+0x13f/0x270
ksys_fallocate+0x3c/0x80
__x64_sys_fallocate+0x1a/0x20
do_syscall_64+0x5b/0x180
entry_SYSCALL_64_after_hwframe+0x44/0xa9

There seems to be another potential COW issue/race with this approach
of different private and shared keys as noted in commit 8382d914
("mm, hugetlb: improve page-fault scalability").

Since every hugetlb mapping (even anon and private) is actually a file
mapping, just use the address_space index key for all mappings.  This
results in potentially more hash collisions.  However, this should not
be the common case.

Link: http://lkml.kernel.org/r/20190328234704.27083-3-mike.kravetz@oracle.com
Link: http://lkml.kernel.org/r/20190412165235.t4sscoujczfhuiyt@linux-r8p5
Fixes: b5cec28d ("hugetlbfs: truncate_hugepages() takes a range of pages")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reviewed-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit cf84807f upstream.

To fix following divide-by-zero error found by Syzkaller:

  divide error: 0000 [#1] SMP PTI
  CPU: 7 PID: 8447 Comm: test Kdump: loaded Not tainted 4.19.24-8.al7.x86_64 #1
  Hardware name: Alibaba Cloud Alibaba Cloud ECS, BIOS rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org 04/01/2014
  RIP: 0010:fb_var_to_videomode+0xae/0xc0
  Code: 04 44 03 46 78 03 4e 7c 44 03 46 68 03 4e 70 89 ce d1 ee 69 c0 e8 03 00 00 f6 c2 01 0f 45 ce 83 e2 02 8d 34 09 0f 45 ce 31 d2 <41> f7 f0 31 d2 f7 f1 89 47 08 f3 c3 66 0f 1f 44 00 00 0f 1f 44 00
  RSP: 0018:ffffb7e189347bf0 EFLAGS: 00010246
  RAX: 00000000e1692410 RBX: ffffb7e189347d60 RCX: 0000000000000000
  RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffb7e189347c10
  RBP: ffff99972a091c00 R08: 0000000000000000 R09: 0000000000000000
  R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000100
  R13: 0000000000010000 R14: 00007ffd66baf6d0 R15: 0000000000000000
  FS:  00007f2054d11740(0000) GS:ffff99972fbc0000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007f205481fd20 CR3: 00000004288a0001 CR4: 00000000001606a0
  Call Trace:
   fb_set_var+0x257/0x390
   ? lookup_fast+0xbb/0x2b0
   ? fb_open+0xc0/0x140
   ? chrdev_open+0xa6/0x1a0
   do_fb_ioctl+0x445/0x5a0
   do_vfs_ioctl+0x92/0x5f0
   ? __alloc_fd+0x3d/0x160
   ksys_ioctl+0x60/0x90
   __x64_sys_ioctl+0x16/0x20
   do_syscall_64+0x5b/0x190
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7f20548258d7
  Code: 44 00 00 48 8b 05 b9 15 2d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 89 15 2d 00 f7 d8 64 89 01 48

It can be triggered easily with following test code:

  #include <linux/fb.h>
  #include <fcntl.h>
  #include <sys/ioctl.h>
  int main(void)
  {
          struct fb_var_screeninfo var = {.activate = 0x100, .pixclock = 60};
          int fd = open("/dev/fb0", O_RDWR);
          if (fd < 0)
                  return 1;

          if (ioctl(fd, FBIOPUT_VSCREENINFO, &var))
                  return 1;

          return 0;
  }
Signed-off-by: Shile Zhang <shile.zhang@linux.alibaba.com>
Cc: Fredrik Noring <noring@nocrew.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e3277335 upstream.

A failed call to kobject_init_and_add() must be followed by a call to
kobject_put().  Currently in the error path when adding fs_devices we
are missing this call.  This could be fixed by calling
btrfs_sysfs_remove_fsid() if btrfs_sysfs_add_fsid() returns an error or
by adding a call to kobject_put() directly in btrfs_sysfs_add_fsid().
Here we choose the second option because it prevents the slightly
unusual error path handling requirements of kobject from leaking out
into btrfs functions.

Add a call to kobject_put() in the error path of kobject_add_and_init().
This causes the release method to be called if kobject_init_and_add()
fails.  open_tree() is the function that calls btrfs_sysfs_add_fsid()
and the error code in this function is already written with the
assumption that the release method is called during the error path of
open_tree() (as seen by the call to btrfs_sysfs_remove_fsid() under the
fail_fsdev_sysfs label).

Cc: stable@vger.kernel.org # v4.4+
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Tobin C. Harding <tobin@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 0c713cba upstream.

When we do a full fsync (the bit BTRFS_INODE_NEEDS_FULL_SYNC is set in the
inode) that happens to be ranged, which happens during a msync() or writes
for files opened with O_SYNC for example, we can end up with a corrupt log,
due to different file extent items representing ranges that overlap with
each other, or hit some assertion failures.

When doing a ranged fsync we only flush delalloc and wait for ordered
exents within that range. If while we are logging items from our inode
ordered extents for adjacent ranges complete, we end up in a race that can
make us insert the file extent items that overlap with others we logged
previously and the assertion failures.

For example, if tree-log.c:copy_items() receives a leaf that has the
following file extents items, all with a length of 4K and therefore there
is an implicit hole in the range 68K to 72K - 1:

  (257 EXTENT_ITEM 64K), (257 EXTENT_ITEM 72K), (257 EXTENT_ITEM 76K), ...

It copies them to the log tree. However due to the need to detect implicit
holes, it may release the path, in order to look at the previous leaf to
detect an implicit hole, and then later it will search again in the tree
for the first file extent item key, with the goal of locking again the
leaf (which might have changed due to concurrent changes to other inodes).

However when it locks again the leaf containing the first key, the key
corresponding to the extent at offset 72K may not be there anymore since
there is an ordered extent for that range that is finishing (that is,
somewhere in the middle of btrfs_finish_ordered_io()), and it just
removed the file extent item but has not yet replaced it with a new file
extent item, so the part of copy_items() that does hole detection will
decide that there is a hole in the range starting from 68K to 76K - 1,
and therefore insert a file extent item to represent that hole, having
a key offset of 68K. After that we now have a log tree with 2 different
extent items that have overlapping ranges:

 1) The file extent item copied before copy_items() released the path,
    which has a key offset of 72K and a length of 4K, representing the
    file range 72K to 76K - 1.

 2) And a file extent item representing a hole that has a key offset of
    68K and a length of 8K, representing the range 68K to 76K - 1. This
    item was inserted after releasing the path, and overlaps with the
    extent item inserted before.

The overlapping extent items can cause all sorts of unpredictable and
incorrect behaviour, either when replayed or if a fast (non full) fsync
happens later, which can trigger a BUG_ON() when calling
btrfs_set_item_key_safe() through __btrfs_drop_extents(), producing a
trace like the following:

  [61666.783269] ------------[ cut here ]------------
  [61666.783943] kernel BUG at fs/btrfs/ctree.c:3182!
  [61666.784644] invalid opcode: 0000 [#1] PREEMPT SMP
  (...)
  [61666.786253] task: ffff880117b88c40 task.stack: ffffc90008168000
  [61666.786253] RIP: 0010:btrfs_set_item_key_safe+0x7c/0xd2 [btrfs]
  [61666.786253] RSP: 0018:ffffc9000816b958 EFLAGS: 00010246
  [61666.786253] RAX: 0000000000000000 RBX: 000000000000000f RCX: 0000000000030000
  [61666.786253] RDX: 0000000000000000 RSI: ffffc9000816ba4f RDI: ffffc9000816b937
  [61666.786253] RBP: ffffc9000816b998 R08: ffff88011dae2428 R09: 0000000000001000
  [61666.786253] R10: 0000160000000000 R11: 6db6db6db6db6db7 R12: ffff88011dae2418
  [61666.786253] R13: ffffc9000816ba4f R14: ffff8801e10c4118 R15: ffff8801e715c000
  [61666.786253] FS:  00007f6060a18700(0000) GS:ffff88023f5c0000(0000) knlGS:0000000000000000
  [61666.786253] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [61666.786253] CR2: 00007f6060a28000 CR3: 0000000213e69000 CR4: 00000000000006e0
  [61666.786253] Call Trace:
  [61666.786253]  __btrfs_drop_extents+0x5e3/0xaad [btrfs]
  [61666.786253]  ? time_hardirqs_on+0x9/0x14
  [61666.786253]  btrfs_log_changed_extents+0x294/0x4e0 [btrfs]
  [61666.786253]  ? release_extent_buffer+0x38/0xb4 [btrfs]
  [61666.786253]  btrfs_log_inode+0xb6e/0xcdc [btrfs]
  [61666.786253]  ? lock_acquire+0x131/0x1c5
  [61666.786253]  ? btrfs_log_inode_parent+0xee/0x659 [btrfs]
  [61666.786253]  ? arch_local_irq_save+0x9/0xc
  [61666.786253]  ? btrfs_log_inode_parent+0x1f5/0x659 [btrfs]
  [61666.786253]  btrfs_log_inode_parent+0x223/0x659 [btrfs]
  [61666.786253]  ? arch_local_irq_save+0x9/0xc
  [61666.786253]  ? lockref_get_not_zero+0x2c/0x34
  [61666.786253]  ? rcu_read_unlock+0x3e/0x5d
  [61666.786253]  btrfs_log_dentry_safe+0x60/0x7b [btrfs]
  [61666.786253]  btrfs_sync_file+0x317/0x42c [btrfs]
  [61666.786253]  vfs_fsync_range+0x8c/0x9e
  [61666.786253]  SyS_msync+0x13c/0x1c9
  [61666.786253]  entry_SYSCALL_64_fastpath+0x18/0xad

A sample of a corrupt log tree leaf with overlapping extents I got from
running btrfs/072:

      item 14 key (295 108 200704) itemoff 2599 itemsize 53
              extent data disk bytenr 0 nr 0
              extent data offset 0 nr 458752 ram 458752
      item 15 key (295 108 659456) itemoff 2546 itemsize 53
              extent data disk bytenr 4343541760 nr 770048
              extent data offset 606208 nr 163840 ram 770048
      item 16 key (295 108 663552) itemoff 2493 itemsize 53
              extent data disk bytenr 4343541760 nr 770048
              extent data offset 610304 nr 155648 ram 770048
      item 17 key (295 108 819200) itemoff 2440 itemsize 53
              extent data disk bytenr 4334788608 nr 4096
              extent data offset 0 nr 4096 ram 4096

The file extent item at offset 659456 (item 15) ends at offset 823296
(659456 + 163840) while the next file extent item (item 16) starts at
offset 663552.

Another different problem that the race can trigger is a failure in the
assertions at tree-log.c:copy_items(), which expect that the first file
extent item key we found before releasing the path exists after we have
released path and that the last key we found before releasing the path
also exists after releasing the path:

  $ cat -n fs/btrfs/tree-log.c
  4080          if (need_find_last_extent) {
  4081                  /* btrfs_prev_leaf could return 1 without releasing the path */
  4082                  btrfs_release_path(src_path);
  4083                  ret = btrfs_search_slot(NULL, inode->root, &first_key,
  4084                                  src_path, 0, 0);
  4085                  if (ret < 0)
  4086                          return ret;
  4087                  ASSERT(ret == 0);
  (...)
  4103                  if (i >= btrfs_header_nritems(src_path->nodes[0])) {
  4104                          ret = btrfs_next_leaf(inode->root, src_path);
  4105                          if (ret < 0)
  4106                                  return ret;
  4107                          ASSERT(ret == 0);
  4108                          src = src_path->nodes[0];
  4109                          i = 0;
  4110                          need_find_last_extent = true;
  4111                  }
  (...)

The second assertion implicitly expects that the last key before the path
release still exists, because the surrounding while loop only stops after
we have found that key. When this assertion fails it produces a stack like
this:

  [139590.037075] assertion failed: ret == 0, file: fs/btrfs/tree-log.c, line: 4107
  [139590.037406] ------------[ cut here ]------------
  [139590.037707] kernel BUG at fs/btrfs/ctree.h:3546!
  [139590.038034] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC PTI
  [139590.038340] CPU: 1 PID: 31841 Comm: fsstress Tainted: G        W         5.0.0-btrfs-next-46 #1
  (...)
  [139590.039354] RIP: 0010:assfail.constprop.24+0x18/0x1a [btrfs]
  (...)
  [139590.040397] RSP: 0018:ffffa27f48f2b9b0 EFLAGS: 00010282
  [139590.040730] RAX: 0000000000000041 RBX: ffff897c635d92c8 RCX: 0000000000000000
  [139590.041105] RDX: 0000000000000000 RSI: ffff897d36a96868 RDI: ffff897d36a96868
  [139590.041470] RBP: ffff897d1b9a0708 R08: 0000000000000000 R09: 0000000000000000
  [139590.041815] R10: 0000000000000008 R11: 0000000000000000 R12: 0000000000000013
  [139590.042159] R13: 0000000000000227 R14: ffff897cffcbba88 R15: 0000000000000001
  [139590.042501] FS:  00007f2efc8dee80(0000) GS:ffff897d36a80000(0000) knlGS:0000000000000000
  [139590.042847] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [139590.043199] CR2: 00007f8c064935e0 CR3: 0000000232252002 CR4: 00000000003606e0
  [139590.043547] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  [139590.043899] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  [139590.044250] Call Trace:
  [139590.044631]  copy_items+0xa3f/0x1000 [btrfs]
  [139590.045009]  ? generic_bin_search.constprop.32+0x61/0x200 [btrfs]
  [139590.045396]  btrfs_log_inode+0x7b3/0xd70 [btrfs]
  [139590.045773]  btrfs_log_inode_parent+0x2b3/0xce0 [btrfs]
  [139590.046143]  ? do_raw_spin_unlock+0x49/0xc0
  [139590.046510]  btrfs_log_dentry_safe+0x4a/0x70 [btrfs]
  [139590.046872]  btrfs_sync_file+0x3b6/0x440 [btrfs]
  [139590.047243]  btrfs_file_write_iter+0x45b/0x5c0 [btrfs]
  [139590.047592]  __vfs_write+0x129/0x1c0
  [139590.047932]  vfs_write+0xc2/0x1b0
  [139590.048270]  ksys_write+0x55/0xc0
  [139590.048608]  do_syscall_64+0x60/0x1b0
  [139590.048946]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
  [139590.049287] RIP: 0033:0x7f2efc4be190
  (...)
  [139590.050342] RSP: 002b:00007ffe743243a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
  [139590.050701] RAX: ffffffffffffffda RBX: 0000000000008d58 RCX: 00007f2efc4be190
  [139590.051067] RDX: 0000000000008d58 RSI: 00005567eca0f370 RDI: 0000000000000003
  [139590.051459] RBP: 0000000000000024 R08: 0000000000000003 R09: 0000000000008d60
  [139590.051863] R10: 0000000000000078 R11: 0000000000000246 R12: 0000000000000003
  [139590.052252] R13: 00000000003d3507 R14: 00005567eca0f370 R15: 0000000000000000
  (...)
  [139590.055128] ---[ end trace 193f35d0215cdeeb ]---

So fix this race between a full ranged fsync and writeback of adjacent
ranges by flushing all delalloc and waiting for all ordered extents to
complete before logging the inode. This is the simplest way to solve the
problem because currently the full fsync path does not deal with ranges
at all (it assumes a full range from 0 to LLONG_MAX) and it always needs
to look at adjacent ranges for hole detection. For use cases of ranged
fsyncs this can make a few fsyncs slower but on the other hand it can
make some following fsyncs to other ranges do less work or no need to do
anything at all. A full fsync is rare anyway and happens only once after
loading/creating an inode and once after less common operations such as a
shrinking truncate.

This is an issue that exists for a long time, and was often triggered by
generic/127, because it does mmap'ed writes and msync (which triggers a
ranged fsync). Adding support for the tree checker to detect overlapping
extents (next patch in the series) and trigger a WARN() when such cases
are found, and then calling btrfs_check_leaf_full() at the end of
btrfs_insert_file_extent() made the issue much easier to detect. Running
btrfs/072 with that change to the tree checker and making fsstress open
files always with O_SYNC made it much easier to trigger the issue (as
triggering it with generic/127 is very rare).

CC: stable@vger.kernel.org # 3.16+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 72bd2323 upstream.

Currently when we fail to COW a path at btrfs_update_root() we end up
always aborting the transaction. However all the current callers of
btrfs_update_root() are able to deal with errors returned from it, many do
end up aborting the transaction themselves (directly or not, such as the
transaction commit path), other BUG_ON() or just gracefully cancel whatever
they were doing.

When syncing the fsync log, we call btrfs_update_root() through
tree-log.c:update_log_root(), and if it returns an -ENOSPC error, the log
sync code does not abort the transaction, instead it gracefully handles
the error and returns -EAGAIN to the fsync handler, so that it falls back
to a transaction commit. Any other error different from -ENOSPC, makes the
log sync code abort the transaction.

So remove the transaction abort from btrfs_update_log() when we fail to
COW a path to update the root item, so that if an -ENOSPC failure happens
we avoid aborting the current transaction and have a chance of the fsync
succeeding after falling back to a transaction commit.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203413
Fixes: 79787eaa ("btrfs: replace many BUG_ONs with proper error handling")
Cc: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5a5ec83d upstream.

Commit 4d207133 changed the types of the statistic values in struct
gfs2_lkstats from s64 to u64.  Because of that, what should be a signed
value in gfs2_update_stats turned into an unsigned value.  When shifted
right, we end up with a large positive value instead of a small negative
value, which results in an incorrect variance estimate.

Fixes: 4d207133 ("gfs2: Make statistics unsigned, suitable for use with do_div()")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Cc: stable@vger.kernel.org # v4.4+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 827a108e upstream.

When the CPU comes out of suspend, the firmware may have modified the OS
Double Lock Register. Save it in an unused slot of cpu_suspend_ctx, and
restore it on resume.

Cc: <stable@vger.kernel.org>
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c4703ce1 upstream.

Users have reported intermittent occurrences of DIMM initialization
failures due to duplicate allocations of address capacity detected in
the labels, or errors of the form below, both have the same root cause.

    nd namespace1.4: failed to track label: 0
    WARNING: CPU: 17 PID: 1381 at drivers/nvdimm/label.c:863

    RIP: 0010:__pmem_label_update+0x56c/0x590 [libnvdimm]
    Call Trace:
     ? nd_pmem_namespace_label_update+0xd6/0x160 [libnvdimm]
     nd_pmem_namespace_label_update+0xd6/0x160 [libnvdimm]
     uuid_store+0x17e/0x190 [libnvdimm]
     kernfs_fop_write+0xf0/0x1a0
     vfs_write+0xb7/0x1b0
     ksys_write+0x57/0xd0
     do_syscall_64+0x60/0x210

Unfortunately those reports were typically with a busy parallel
namespace creation / destruction loop making it difficult to see the
components of the bug. However, Jane provided a simple reproducer using
the work-in-progress sub-section implementation.

When ndctl is reconfiguring a namespace it may take an existing defunct
/ disabled namespace and reconfigure it with a new uuid and other
parameters. Critically namespace_update_uuid() takes existing address
resources and renames them for the new namespace to use / reconfigure as
it sees fit. The bug is that this rename only happens in the resource
tracking tree. Existing labels with the old uuid are not reaped leading
to a scenario where multiple active labels reference the same span of
address range.

Teach namespace_update_uuid() to flag any references to the old uuid for
reaping at the next label update attempt.

Cc: <stable@vger.kernel.org>
Fixes: bf9bccc1 ("libnvdimm: pmem label sets and namespace instantiation")
Link: https://github.com/pmem/ndctl/issues/91Reported-by: Jane Chu <jane.chu@oracle.com>
Reported-by: Jeff Moyer <jmoyer@redhat.com>
Reported-by: Erwin Tsaur <erwin.tsaur@oracle.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c9bcd3e3 upstream.

Current logic does not allow VCPU to be loaded onto CPU with
APIC ID 255. This should be allowed since the host physical APIC ID
field in the AVIC Physical APIC table entry is an 8-bit value,
and APIC ID 255 is valid in system with x2APIC enabled.
Instead, do not allow VCPU load if the host APIC ID cannot be
represented by an 8-bit value.

Also, use the more appropriate AVIC_PHYSICAL_ID_ENTRY_HOST_PHYSICAL_ID_MASK
instead of AVIC_MAX_PHYSICAL_ID_COUNT.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 009b30ac upstream.

The kernel self-tests picked up an issue with CTR mode:
alg: skcipher: p8_aes_ctr encryption test failed (wrong result) on test vector 3, cfg="uneven misaligned splits, may sleep"

Test vector 3 has an IV of FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD, so
after 3 increments it should wrap around to 0.

In the aesp8-ppc code from OpenSSL, there are two paths that
increment IVs: the bulk (8 at a time) path, and the individual
path which is used when there are fewer than 8 AES blocks to
process.

In the bulk path, the IV is incremented with vadduqm: "Vector
Add Unsigned Quadword Modulo", which does 128-bit addition.

In the individual path, however, the IV is incremented with
vadduwm: "Vector Add Unsigned Word Modulo", which instead
does 4 32-bit additions. Thus the IV would instead become
FFFFFFFFFFFFFFFFFFFFFFFF00000000, throwing off the result.

Use vadduqm.

This was probably a typo originally, what with q and w being
adjacent. It is a pretty narrow edge case: I am really
impressed by the quality of the kernel self-tests!

Fixes: 5c380d62 ("crypto: vmx - Add support for VMS instructions by ASM")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Axtens <dja@axtens.net>
Acked-by: Nayna Jain <nayna@linux.ibm.com>
Tested-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8acf608e upstream.

This reverts commit 20bd1d02.

This patch introduced regressions for devices that come online in
read-only state and subsequently switch to read-write.

Given how the partition code is currently implemented it is not
possible to persist the read-only flag across a device revalidate
call. This may need to get addressed in the future since it is common
for user applications to proactively call BLKRRPART.

Reverting this commit will re-introduce a regression where a
device-initiated revalidate event will cause the admin state to be
forgotten. A separate patch will address this issue.

Fixes: 20bd1d02 ("scsi: sd: Keep disk read-only when re-reading partition")
Cc: <stable@vger.kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f381c6a4 upstream.

This barrier only applies to the read-modify-write operations; in
particular, it does not apply to the atomic_set() primitive.

Replace the barrier with an smp_mb().

Fixes: dac56212 ("bio: skip atomic inc/dec of ->bi_cnt for most use cases")
Cc: stable@vger.kernel.org
Reported-by: "Paul E. McKenney" <paulmck@linux.ibm.com>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: linux-block@vger.kernel.org
Cc: "Paul E. McKenney" <paulmck@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 66f61c92 upstream.

Commit 11988499 ("KVM: x86: Skip EFER vs. guest CPUID checks for
host-initiated writes", 2019-04-02) introduced a "return false" in a
function returning int, and anyway set_efer has a "nonzero on error"
conventon so it should be returning 1.
Reported-by: Pavel Machek <pavel@denx.de>
Fixes: 11988499 ("KVM: x86: Skip EFER vs. guest CPUID checks for host-initiated writes")
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ee0ed02c upstream.

It is possible that unlinked inode enters ext4_setattr() (e.g. if
somebody calls ftruncate(2) on unlinked but still open file). In such
case we should not delete the inode from the orphan list if truncate
fails. Note that this is mostly a theoretical concern as filesystem is
corrupted if we reach this path anyway but let's be consistent in our
orphan handling.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9dc20113 upstream.

A fallthrough in switch/case was introduced in f627caf5 ("fbdev:
sm712fb: fix crashes and garbled display during DPMS modesetting"),
due to my copy-paste error, which would cause the memory clock frequency
for SM720 to be programmed to SM712.

Since it only reprograms the clock to a different frequency, it's only
a benign issue without visible side-effect, so it also evaded Sudip
Mukherjee's code review and regression tests. scripts/checkpatch.pl
also failed to discover the issue, possibly due to nested switch
statements.

This issue was found by Stephen Rothwell by building linux-next with
-Wimplicit-fallthrough.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: f627caf5 ("fbdev: sm712fb: fix crashes and garbled display during DPMS modesetting")
Signed-off-by: Yifeng Li <tomli@tomli.me>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: "Gustavo A. R. Silva" <gustavo@embeddedor.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c2d1b3aa upstream.

Up until now trimming the freespace was done irrespective of what the
arguments of the FITRIM ioctl were. For example fstrim's -o/-l arguments
will be entirely ignored. Fix it by correctly handling those paramter.
This requires breaking if the found freespace extent is after the end of
the passed range as well as completing trim after trimming
fstrim_range::len bytes.

Fixes: 499f377f ("btrfs: iterate over unused chunk space in FITRIM")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b2176a1d upstream.

The problem is that any 'uptodate' vs 'disks' check is not precise
in this path. Put a "WARN_ON(!test_bit(R5_UPTODATE, &dev->flags)" on the
device that might try to kick off writes and then skip the action.
Better to prevent the raid driver from taking unexpected action *and* keep
the system alive vs killing the machine with BUG_ON.

Note: fixed warning reported by kbuild test robot <lkp@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Nigel Croxon <ncroxon@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a25d8c32 upstream.

This reverts commit 4f4fd7c5.

Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Nigel Croxon <ncroxon@redhat.com>
Cc: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit bf561d3c ]

While cross building perf to the ARC architecture on a fedora 30 host,
we were failing with:

      CC       /tmp/build/perf/bench/numa.o
  bench/numa.c: In function ‘worker_thread’:
  bench/numa.c:1261:12: error: ‘RUSAGE_THREAD’ undeclared (first use in this function); did you mean ‘SIGEV_THREAD’?
    getrusage(RUSAGE_THREAD, &rusage);
              ^~~~~~~~~~~~~
              SIGEV_THREAD
  bench/numa.c:1261:12: note: each undeclared identifier is reported only once for each function it appears in

[perfbuilder@60d5802468f6 perf]$ /arc_gnu_2019.03-rc1_prebuilt_uclibc_le_archs_linux_install/bin/arc-linux-gcc --version | head -1
arc-linux-gcc (ARCv2 ISA Linux uClibc toolchain 2019.03-rc1) 8.3.1 20190225
[perfbuilder@60d5802468f6 perf]$

Trying to reproduce a report by Vineet, I noticed that, with just
cross-built zlib and numactl libraries, I ended up with the above
failure.

So, since RUSAGE_THREAD is available as a define, check for that and
numactl libraries, I ended up with the above failure.

So, since RUSAGE_THREAD is available as a define in the system headers,
check if it is defined in the 'perf bench numa' sources and define it if
not.

Now it builds and I have to figure out if the problem reported by Vineet
only takes place if we have libelf or some other library available.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: linux-snps-arc@lists.infradead.org
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Link: https://lkml.kernel.org/n/tip-2wb4r1gir9xrevbpq7qp0amk@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 4e903604 ]

To choose whether to pick the GID from the old (16bit) or new (32bit)
field, we should check if the old gid field is set to 0xffff.  Mainline
checks the old *UID* field instead - cut'n'paste from the corresponding
code in ufs_get_inode_uid().

Fixes: 252e211eSigned-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 349ced99 ]

Fix a similar endless event loop as was done in commit
8dcf3217 ("i2c: prevent endless uevent loop with
CONFIG_I2C_DEBUG_CORE"):

  The culprit is the dev_dbg printk in the i2c uevent handler. If
  this is activated (for instance by CONFIG_I2C_DEBUG_CORE) it results
  in an endless loop with systemd-journald.

  This happens if user-space scans the system log and reads the uevent
  file to get information about a newly created device, which seems
  fair use to me. Unfortunately reading the "uevent" file uses the
  same function that runs for creating the uevent for a new device,
  generating the next syslog entry

Both CONFIG_I2C_DEBUG_CORE and CONFIG_POWER_SUPPLY_DEBUG were reported
in https://bugs.freedesktop.org/show_bug.cgi?id=76886 but only former
seems to have been fixed. Drop debug prints as it was done in I2C
subsystem to resolve the issue.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Chris Healy <cphealy@gmail.com>
Cc: linux-pm@vger.kernel.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 811328fc ]

A failed KVM_ARM_VCPU_INIT should not set the vcpu target,
as the vcpu target is used by kvm_vcpu_initialized() to
determine if other vcpu ioctls may proceed. We need to set
the target before calling kvm_reset_vcpu(), but if that call
fails, we should then unset it and clear the feature bitmap
while we're at it.
Signed-off-by: Andrew Jones <drjones@redhat.com>
[maz: Simplified patch, completed commit message]
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit f1267cf3 ]

The txq of vif is added to active_txqs list for ATF TXQ scheduling
in the function ieee80211_queue_skb(), but it was not properly removed
before freeing the txq object. It was causing use after free of the txq
objects from the active_txqs list, result was kernel panic
due to invalid memory access.

Fix kernel invalid memory access by properly removing txq object
from active_txqs list before free the object.
Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>