This patch fixes the error handling for mcp251xfd_chip_rx_int_enable().
Instead just returning the error, properly shut down the chip.

Link: https://lore.kernel.org/all/20211106201526.44292-2-mkl@pengutronix.de
Fixes: 55e5b97f ("can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: mcp251xfd: mcp251xfd_irq(): add missing can_rx_offload_threaded_irq_finish() in case of bus off

The function can_rx_offload_threaded_irq_finish() is needed to trigger
the NAPI thread to deliver read CAN frames to the networking stack.

This patch adds the missing call to can_rx_offload_threaded_irq_finish()
in case of a bus off, before leaving the interrupt handler to avoid
packet starvation.

Link: https://lore.kernel.org/all/20211106201526.44292-1-mkl@pengutronix.de
Fixes: 30bfec4f ("can: rx-offload: can_rx_offload_threaded_irq_finish(): add new function to be called from threaded interrupt")
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Proposes the possible update of the PCAN-USB firmware after indicating its
name and current version.

Link: https://lore.kernel.org/all/20211021081505.18223-3-s.grosjean@peak-system.comSigned-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Since for the PCAN-USB, the management of the transition to the
ERROR_WARNING or ERROR_PASSIVE state is done according to the error
counters, these must be requested unconditionally.

Link: https://lore.kernel.org/all/20211021081505.18223-2-s.grosjean@peak-system.com
Fixes: c11dcee7 ("can: peak_usb: pcan_usb_decode_error(): upgrade handling of bus state changes")
Cc: stable@vger.kernel.org
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

In es58x_rx_err_msg(), if can->do_set_mode() fails, the function
directly returns without calling netif_rx(skb). This means that the
skb previously allocated by alloc_can_err_skb() is not freed. In other
terms, this is a memory leak.

This patch simply removes the return statement in the error branch and
let the function continue.

Issue was found with GCC -fanalyzer, please follow the link below for
details.

Fixes: 85372578 ("can: etas_es58x: add core support for ETAS ES58X CAN USB interfaces")
Link: https://lore.kernel.org/all/20211026180740.1953265-1-mailhol.vincent@wanadoo.frSigned-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

The TP.CM_BAM message must be sent to the global address [1], so add a
check to drop TP.CM_BAM sent to a non-global address.

Without this patch, the receiver will treat the following packets as
normal RTS/CTS transport:
18EC0102#20090002FF002301
18EB0102#0100000000000000
18EB0102#020000FFFFFFFFFF

[1] SAE-J1939-82 2015 A.3.3 Row 1.

Fixes: 9d71dd0c ("can: add support of SAE J1939 protocol")
Link: https://lore.kernel.org/all/1635431907-15617-4-git-send-email-zhangchangzhong@huawei.com
Cc: stable@vger.kernel.org
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

According to SAE-J1939-82 2015 (A.3.6 Row 2), a receiver should never
send TP.CM_CTS to the global address, so we can add a check in
j1939_can_recv() to drop messages with invalid source address.

Fixes: 9d71dd0c ("can: add support of SAE J1939 protocol")
Link: https://lore.kernel.org/all/1635431907-15617-3-git-send-email-zhangchangzhong@huawei.com
Cc: stable@vger.kernel.org
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

This patch prevents BAM transport from being closed by receiving abort
message, as specified in SAE-J1939-82 2015 (A.3.3 Row 4).

Fixes: 9d71dd0c ("can: add support of SAE J1939 protocol")
Link: https://lore.kernel.org/all/1635431907-15617-2-git-send-email-zhangchangzhong@huawei.com
Cc: stable@vger.kernel.org
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

The newinet value is initialized with inet_sk() in a block code to
handle sockets for the ETH_P_IP protocol. Along this code path,
newinet is never read. Thus, assignment to newinet is needless and
can be removed.
Signed-off-by: Nghia Le <nghialm78@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20211104143740.32446-1-nghialm78@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Daniel Borkmann says:

====================
pull-request: bpf 2021-11-05

We've added 15 non-merge commits during the last 3 day(s) which contain
a total of 14 files changed, 199 insertions(+), 90 deletions(-).

The main changes are:

1) Fix regression from stack spill/fill of <8 byte scalars, from Martin KaFai Lau.

2) Fix perf's build of bpftool's bootstrap version due to missing libbpf
   headers, from Quentin Monnet.

3) Fix riscv{32,64} BPF exception tables build errors and warnings, from Björn Töpel.

4) Fix bpf fs to allow RENAME_EXCHANGE support for atomic upgrades on sk_lookup
   control planes, from Lorenz Bauer.

5) Fix libbpf's error reporting in bpf_map_lookup_and_delete_elem_flags() due to
   missing libbpf_err_errno(), from Mehrdad Arshad Rad.

6) Various fixes to make xdp_redirect_multi selftest more reliable, from Hangbin Liu.

7) Fix netcnt selftest to make it run serial and thus avoid conflicts with other
   cgroup/skb selftests run in parallel that could cause flakes, from Andrii Nakryiko.

8) Fix reuseport_bpf_numa networking selftest to skip unavailable NUMA nodes,
   from Kleber Sacilotto de Souza.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  riscv, bpf: Fix RV32 broken build, and silence RV64 warning
  selftests/bpf/xdp_redirect_multi: Limit the tests in netns
  selftests/bpf/xdp_redirect_multi: Give tcpdump a chance to terminate cleanly
  selftests/bpf/xdp_redirect_multi: Use arping to accurate the arp number
  selftests/bpf/xdp_redirect_multi: Put the logs to tmp folder
  libbpf: Fix lookup_and_delete_elem_flags error reporting
  bpftool: Install libbpf headers for the bootstrap version, too
  selftests/net: Fix reuseport_bpf_numa by skipping unavailable nodes
  selftests/bpf: Verifier test on refill from a smaller spill
  bpf: Do not reject when the stack read size is different from the tracked scalar size
  selftests/bpf: Make netcnt selftests serial to avoid spurious failures
  selftests/bpf: Test RENAME_EXCHANGE and RENAME_NOREPLACE on bpffs
  selftests/bpf: Convert test_bpffs to ASSERT macros
  libfs: Support RENAME_EXCHANGE in simple_rename()
  libfs: Move shmem_exchange to simple_rename_exchange
====================

Link: https://lore.kernel.org/r/20211105165803.29372-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Commit 252c765b ("riscv, bpf: Add BPF exception tables") only addressed
RV64, and broke the RV32 build [1]. Fix by gating the exception tables code
with CONFIG_ARCH_RV64I.

Further, silence a "-Wmissing-prototypes" warning [2] in the RV64 BPF JIT.

  [1] https://lore.kernel.org/llvm/202111020610.9oy9Rr0G-lkp@intel.com/
  [2] https://lore.kernel.org/llvm/202110290334.2zdMyRq4-lkp@intel.com/

Fixes: 252c765b ("riscv, bpf: Add BPF exception tables")
Signed-off-by: Björn Töpel <bjorn@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Tong Tiangen <tongtiangen@huawei.com>
Link: https://lore.kernel.org/bpf/20211103115453.397209-1-bjorn@kernel.org

As I want to test both DEVMAP and DEVMAP_HASH in XDP multicast redirect, I
limited DEVMAP max entries to a small value for performace. When the test
runs after amount of interface creating/deleting tests. The interface index
will exceed the map max entries and xdp_redirect_multi will error out with
"Get interfacesInterface index to large".

Fix this issue by limit the tests in netns and specify the ifindex when
creating interfaces.

Fixes: d2329247 ("selftests/bpf: Add xdp_redirect_multi test")
Reported-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211027033553.962413-5-liuhangbin@gmail.com

No need to kill tcpdump with -9.

Fixes: d2329247 ("selftests/bpf: Add xdp_redirect_multi test")
Suggested-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211027033553.962413-4-liuhangbin@gmail.com

The arp request number triggered by ping none exist address is not accurate,
which may lead the test false negative/positive. Change to use arping to
accurate the arp number. Also do not use grep pattern match for dot.

Fixes: d2329247 ("selftests/bpf: Add xdp_redirect_multi test")
Suggested-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211027033553.962413-3-liuhangbin@gmail.com

The xdp_redirect_multi test logs are created in selftest folder and not cleaned
after test. Let's creat a tmp dir and remove the logs after testing.

Fixes: d2329247 ("selftests/bpf: Add xdp_redirect_multi test")
Suggested-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211027033553.962413-2-liuhangbin@gmail.com

Fix bpf_map_lookup_and_delete_elem_flags() to pass the return code through
libbpf_err_errno() as we do similarly in bpf_map_lookup_and_delete_elem().

Fixes: f12b6543 ("libbpf: Streamline error reporting for low-level APIs")
Signed-off-by: Mehrdad Arshad Rad <arshad.rad@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20211104171354.11072-1-arshad.rad@gmail.com

We recently changed bpftool's Makefile to make it install libbpf's
headers locally instead of pulling them from the source directory of the
library. Although bpftool needs two versions of libbpf, a "regular" one
and a "bootstrap" version, we would only install headers for the regular
libbpf build. Given that this build always occurs before the bootstrap
build when building bpftool, this is enough to ensure that the bootstrap
bpftool will have access to the headers exported through the regular
libbpf build.

However, this did not account for the case when we only want the
bootstrap version of bpftool, through the "bootstrap" target. For
example, perf needs the bootstrap version only, to generate BPF
skeletons. In that case, when are the headers installed? For some time,
the issue has been masked, because we had a step (the installation of
headers internal to libbpf) which would depend on the regular build of
libbpf and hence trigger the export of the headers, just for the sake of
creating a directory. But this changed with commit 8b6c4624
("bpftool: Remove Makefile dep. on $(LIBBPF) for
$(LIBBPF_INTERNAL_HDRS)"), where we cleaned up that stage and removed
the dependency on the regular libbpf build. As a result, when we only
want the bootstrap bpftool version, the regular libbpf is no longer
built. The bootstrap libbpf version is built, but headers are not
exported, and the bootstrap bpftool build fails because of the missing
headers.

To fix this, we also install the library headers for the bootstrap
version of libbpf, to use them for the bootstrap bpftool and for
generating the skeletons.

Fixes: f012ade1 ("bpftool: Install libbpf headers instead of including the dir")
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/bpf/20211105015813.6171-1-quentin@isovalent.com

fix the remaining build issues reported by patchwork
in firmware v4.0 support commit which has been already
merged.

Fix patchwork issues:
 - source inline
 - checkpatch

Fixes: bb5dbf2c ("net: marvell: prestera: add firmware v4.0 support")
Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

'net/protocol.h' included in 'drivers/net/amt.c' is duplicated.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Zhang Mingyu <zhang.mingyu@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

The mii ioctls are now handled by the ndo_eth_ioctl() callback,
not the old ndo_do_ioctl(), but octeontx2-nicvf introduced the
function for the old way.

Move it over to ndo_eth_ioctl() to actually allow calling it from
user space.

Fixes: 43510ef4 ("octeontx2-nicvf: Add PTP hardware clock support to NIX VF")
Fixes: a7605370 ("dev_ioctl: split out ndo_eth_ioctl")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The timestamp ioctls are now handled by the ndo_eth_ioctl() callback,
not the old ndo_do_ioctl(), but oax88796 introduced the
function for the old way.

Move it over to ndo_eth_ioctl() to actually allow calling it from
user space.

Fixes: a97c69ba ("net: ax88796c: ASIX AX88796C SPI Ethernet Adapter Driver")
Fixes: a7605370 ("dev_ioctl: split out ndo_eth_ioctl")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Lukasz Stelmach <l.stelmach@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Eliminate the following coccicheck warning:
./drivers/net/amt.c:2795:6-9: ERROR: amt is NULL but dereferenced.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Build bot says:

>> drivers/net/ethernet/asix/ax88796c_main.c:1116:34: warning: unused variable 'ax88796c_dt_ids' [-Wunused-const-variable]
   static const struct of_device_id ax88796c_dt_ids[] = {
                                    ^

The only reference to this array is wrapped in of_match_ptr().
Reported-by: kernel test robot <lkp@intel.com>
Fixes: a97c69ba ("net: ax88796c: ASIX AX88796C SPI Ethernet Adapter Driver")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

udp_mem is a vector of 3 INTEGERs, which is used to limit the number of
pages allowed for queueing by all UDP sockets.

However, sk_has_memory_pressure() in __sk_mem_raise_allocated() always
return false for udp, as memory pressure is not supported by udp, which
means that __sk_mem_raise_allocated() will fail once pages allocated
for udp socket exceeds udp_mem[0].

Therefor, udp_mem[0] is the only one that limit the number of pages.
However, the document of udp_mem just express that udp_mem[2] is the
limitation. So, just fix it.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The print function dev_err() is redundant because
platform_get_irq() already prints an error.
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Reviewed-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The octeontx2 pf nic driver failsz to link when the devlink support
is not reachable:

aarch64-linux-ld: drivers/net/ethernet/marvell/octeontx2/nic/otx2_devlink.o: in function `otx2_dl_mcam_count_get':
otx2_devlink.c:(.text+0x10): undefined reference to `devlink_priv'
aarch64-linux-ld: drivers/net/ethernet/marvell/octeontx2/nic/otx2_devlink.o: in function `otx2_dl_mcam_count_validate':
otx2_devlink.c:(.text+0x50): undefined reference to `devlink_priv'
aarch64-linux-ld: drivers/net/ethernet/marvell/octeontx2/nic/otx2_devlink.o: in function `otx2_dl_mcam_count_set':
otx2_devlink.c:(.text+0xd0): undefined reference to `devlink_priv'
aarch64-linux-ld: drivers/net/ethernet/marvell/octeontx2/nic/otx2_devlink.o: in function `otx2_devlink_info_get':
otx2_devlink.c:(.text+0x150): undefined reference to `devlink_priv'

This is already selected by the admin function driver, but not the
actual nic, which might be built-in when the af driver is not.

Fixes: 2da48943 ("octeontx2-pf: devlink params support to set mcam entry count")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use the macro 'swap()' defined in 'include/linux/minmax.h' to avoid
opencoding it.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Yang Guang <yang.guang5@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use the macro 'swap()' defined in 'include/linux/minmax.h' to avoid
opencoding it.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Yang Guang <yang.guang5@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

The assignment of err will be overwritten next, so this statement
should be deleted.

The clang_analyzer complains as follows:

drivers/net/ethernet/broadcom/tg3.c:5506:2: warning:

Value stored to 'expected_sg_dig_ctrl' is never read
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: luo penghao <luo.penghao@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

This makes the output of smcr_link_down tracepoint easier to use and
understand without additional translating function's pointer address.

It prints the function name with offset:

  <idle>-0       [000] ..s.    69.087164: smcr_link_down: lnk=00000000dab41cdc lgr=000000007d5d8e24 state=0 rc=1 dev=mlx5_0 location=smc_wr_tx_tasklet_fn+0x5ef/0x6f0 [smc]

Link: https://lore.kernel.org/netdev/11f17a34-fd35-f2ec-3f20-dd0c34e55fde@linux.ibm.com/Signed-off-by: Tony Lu <tonylu@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When I do fuzz test for bonding device interface, I got the following
use-after-free Calltrace:

==================================================================
BUG: KASAN: use-after-free in bond_enslave+0x1521/0x24f0
Read of size 8 at addr ffff88825bc11c00 by task ifenslave/7365

CPU: 5 PID: 7365 Comm: ifenslave Tainted: G            E     5.15.0-rc1+ #13
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014
Call Trace:
 dump_stack_lvl+0x6c/0x8b
 print_address_description.constprop.0+0x48/0x70
 kasan_report.cold+0x82/0xdb
 __asan_load8+0x69/0x90
 bond_enslave+0x1521/0x24f0
 bond_do_ioctl+0x3e0/0x450
 dev_ifsioc+0x2ba/0x970
 dev_ioctl+0x112/0x710
 sock_do_ioctl+0x118/0x1b0
 sock_ioctl+0x2e0/0x490
 __x64_sys_ioctl+0x118/0x150
 do_syscall_64+0x35/0xb0
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f19159cf577
Code: b3 66 90 48 8b 05 11 89 2c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 78
RSP: 002b:00007ffeb3083c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007ffeb3084bca RCX: 00007f19159cf577
RDX: 00007ffeb3083ce0 RSI: 0000000000008990 RDI: 0000000000000003
RBP: 00007ffeb3084bc4 R08: 0000000000000040 R09: 0000000000000000
R10: 00007ffeb3084bc0 R11: 0000000000000246 R12: 00007ffeb3083ce0
R13: 0000000000000000 R14: 0000000000000000 R15: 00007ffeb3083cb0

Allocated by task 7365:
 kasan_save_stack+0x23/0x50
 __kasan_kmalloc+0x83/0xa0
 kmem_cache_alloc_trace+0x22e/0x470
 bond_enslave+0x2e1/0x24f0
 bond_do_ioctl+0x3e0/0x450
 dev_ifsioc+0x2ba/0x970
 dev_ioctl+0x112/0x710
 sock_do_ioctl+0x118/0x1b0
 sock_ioctl+0x2e0/0x490
 __x64_sys_ioctl+0x118/0x150
 do_syscall_64+0x35/0xb0
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Freed by task 7365:
 kasan_save_stack+0x23/0x50
 kasan_set_track+0x20/0x30
 kasan_set_free_info+0x24/0x40
 __kasan_slab_free+0xf2/0x130
 kfree+0xd1/0x5c0
 slave_kobj_release+0x61/0x90
 kobject_put+0x102/0x180
 bond_sysfs_slave_add+0x7a/0xa0
 bond_enslave+0x11b6/0x24f0
 bond_do_ioctl+0x3e0/0x450
 dev_ifsioc+0x2ba/0x970
 dev_ioctl+0x112/0x710
 sock_do_ioctl+0x118/0x1b0
 sock_ioctl+0x2e0/0x490
 __x64_sys_ioctl+0x118/0x150
 do_syscall_64+0x35/0xb0
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Last potentially related work creation:
 kasan_save_stack+0x23/0x50
 kasan_record_aux_stack+0xb7/0xd0
 insert_work+0x43/0x190
 __queue_work+0x2e3/0x970
 delayed_work_timer_fn+0x3e/0x50
 call_timer_fn+0x148/0x470
 run_timer_softirq+0x8a8/0xc50
 __do_softirq+0x107/0x55f

Second to last potentially related work creation:
 kasan_save_stack+0x23/0x50
 kasan_record_aux_stack+0xb7/0xd0
 insert_work+0x43/0x190
 __queue_work+0x2e3/0x970
 __queue_delayed_work+0x130/0x180
 queue_delayed_work_on+0xa7/0xb0
 bond_enslave+0xe25/0x24f0
 bond_do_ioctl+0x3e0/0x450
 dev_ifsioc+0x2ba/0x970
 dev_ioctl+0x112/0x710
 sock_do_ioctl+0x118/0x1b0
 sock_ioctl+0x2e0/0x490
 __x64_sys_ioctl+0x118/0x150
 do_syscall_64+0x35/0xb0
 entry_SYSCALL_64_after_hwframe+0x44/0xae

The buggy address belongs to the object at ffff88825bc11c00
 which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 0 bytes inside of
 1024-byte region [ffff88825bc11c00, ffff88825bc12000)
The buggy address belongs to the page:
page:ffffea00096f0400 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x25bc10
head:ffffea00096f0400 order:3 compound_mapcount:0 compound_pincount:0
flags: 0x57ff00000010200(slab|head|node=1|zone=2|lastcpupid=0x7ff)
raw: 057ff00000010200 ffffea0009a71c08 ffff888240001968 ffff88810004dbc0
raw: 0000000000000000 00000000000a000a 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff88825bc11b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ffff88825bc11b80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff88825bc11c00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                   ^
 ffff88825bc11c80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff88825bc11d00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================

Put new_slave in bond_sysfs_slave_add() will cause use-after-free problems
when new_slave is accessed in the subsequent error handling process. Since
new_slave will be put in the subsequent error handling process, remove the
unnecessary put to fix it.
In addition, when sysfs_create_file() fails, if some files have been crea-
ted successfully, we need to call sysfs_remove_file() to remove them.
Since there are sysfs_create_files() & sysfs_remove_files() can be used,
use these two functions instead.

Fixes: 7afcaec4 (bonding: use kobject_put instead of _del after kobject_add)
Signed-off-by: Huang Guobin <huangguobin4@huawei.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Eugene Syromiatnikov says:

====================
MCTP sockaddr padding check/initialisation fixup

This pair of patches introduces checks for padding fields of struct
sockaddr_mctp/sockaddr_mctp_ext to ease their re-use for possible
extensions in the future;  as well as zeroing of these fields
in the respective sockaddr filling routines.  While the first commit
is definitely an ABI breakage, it is proposed in hopes that the change
is made soon enough (the interface appeared only in Linux 5.15)
to avoid affecting any existing user space.
====================

Link: https://lore.kernel.org/r/cover.1635965993.git.esyr@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

struct sockaddr_mctp_ext.__smctp_paddin0 has to be checked for being set
to zero, otherwise it cannot be utilised in the future.

Fixes: 99ce45d5 ("mctp: Implement extended addressing")
Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com>
Acked-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

In order to have the padding fields actually usable in the future,
there have to be checks that user space doesn't supply non-zero garbage
there.  It is also worth setting these padding fields to zero, unless
it is known that they have been already zeroed.

Cc: stable@vger.kernel.org # v5.15
Fixes: 5a20dd46 ("mctp: Be explicit about struct sockaddr_mctp padding")
Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com>
Acked-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2021-11-03

Brett fixes issues with promiscuous mode settings not being properly
enabled and removes setting of VF antispoof along with promiscuous
mode. He also ensures that VF Tx queues are always disabled and resolves
a race between virtchnl handling and VF related ndo ops.

Sylwester fixes an issue where a VF MAC could not be set to its primary
MAC if the address is already present.

* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  ice: Fix race conditions between virtchnl handling and VF ndo ops
  ice: Fix not stopping Tx queues for VFs
  ice: Fix replacing VF hardware MAC to existing MAC filter
  ice: Remove toggling of antispoof for VF trusted promiscuous mode
  ice: Fix VF true promiscuous mode
====================

Link: https://lore.kernel.org/r/20211103161935.2997369-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

As reported by Zhang there's a small issue if in forced mode the duplex
mode changes with the link staying up [0]. In this case the MAC isn't
notified about the change.

The proposed patch relies on the phylib state machine and ignores the
fact that there are drivers that uses phylib but not the phylib state
machine. So let's don't change the behavior for such drivers and fix
it w/o re-adding state PHY_FORCING for the case that phylib state
machine is used.

[0] https://lore.kernel.org/netdev/a5c26ffd-4ee4-a5e6-4103-873208ce0dc5@huawei.com/T/

Fixes: 2bd229df ("net: phy: remove state PHY_FORCING")
Reported-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Tested-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/7b8b9456-a93f-abbc-1dc5-a2c2542f932c@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Fix following coccicheck warning:
./net/core/devlink.c:69:6-10: WARNING use flexible-array member instead
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Link: https://lore.kernel.org/r/20211103121607.27490-1-guozhengkui@vivo.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In some platforms the numa node numbers are not necessarily consecutive,
meaning that not all nodes from 0 to the value returned by numa_max_node()
are available on the system. Using node numbers which are not available
results on errors from libnuma such as:

  ---- IPv4 UDP ----
  send node 0, receive socket 0
  libnuma: Warning: Cannot read node cpumask from sysfs
  ./reuseport_bpf_numa: failed to pin to node: No such file or directory

Fix it by checking if the node number bit is set on numa_nodes_ptr, which
is defined on libnuma as "Set with all nodes the kernel has exposed to
userspace".
Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211101145317.286118-1-kleber.souza@canonical.com

Sanity check in sock_reserve_memory() was not enough to prevent malicious
user to trigger a NULL deref.

In this case, the isse is that sk_prot->memory_allocated is NULL.

Use standard sk_has_account() helper to deal with this.

BUG: KASAN: null-ptr-deref in instrument_atomic_read_write include/linux/instrumented.h:101 [inline]
BUG: KASAN: null-ptr-deref in atomic_long_add_return include/linux/atomic/atomic-instrumented.h:1218 [inline]
BUG: KASAN: null-ptr-deref in sk_memory_allocated_add include/net/sock.h:1371 [inline]
BUG: KASAN: null-ptr-deref in sock_reserve_memory net/core/sock.c:994 [inline]
BUG: KASAN: null-ptr-deref in sock_setsockopt+0x22ab/0x2b30 net/core/sock.c:1443
Write of size 8 at addr 0000000000000000 by task syz-executor.0/11270

CPU: 1 PID: 11270 Comm: syz-executor.0 Not tainted 5.15.0-syzkaller #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
 __kasan_report mm/kasan/report.c:446 [inline]
 kasan_report.cold+0x66/0xdf mm/kasan/report.c:459
 check_region_inline mm/kasan/generic.c:183 [inline]
 kasan_check_range+0x13d/0x180 mm/kasan/generic.c:189
 instrument_atomic_read_write include/linux/instrumented.h:101 [inline]
 atomic_long_add_return include/linux/atomic/atomic-instrumented.h:1218 [inline]
 sk_memory_allocated_add include/net/sock.h:1371 [inline]
 sock_reserve_memory net/core/sock.c:994 [inline]
 sock_setsockopt+0x22ab/0x2b30 net/core/sock.c:1443
 __sys_setsockopt+0x4f8/0x610 net/socket.c:2172
 __do_sys_setsockopt net/socket.c:2187 [inline]
 __se_sys_setsockopt net/socket.c:2184 [inline]
 __x64_sys_setsockopt+0xba/0x150 net/socket.c:2184
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f56076d5ae9
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f5604c4b188 EFLAGS: 00000246 ORIG_RAX: 0000000000000036
RAX: ffffffffffffffda RBX: 00007f56077e8f60 RCX: 00007f56076d5ae9
RDX: 0000000000000049 RSI: 0000000000000001 RDI: 0000000000000003
RBP: 00007f560772ff25 R08: 000000000000fec7 R09: 0000000000000000
R10: 0000000020000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007fffb61a100f R14: 00007f5604c4b300 R15: 0000000000022000
 </TASK>

Fixes: 2bb2f5fb ("net: add new socket option SO_RESERVE_MEM")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Wei Wang <weiwan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Extending these flags using the existing (1 << x) pattern triggers
complaints from checkpatch. Instead of ignoring checkpatch modify the
existing values to use BIT(x) style in a separate commit.
Signed-off-by: Leonard Crestez <cdleonard@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>