This patch adds SCC context allocation and initialization support for
DCQCN in kernel space driver.
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

When CONFIG_INFINIBAND_ON_DEMAND_PAGING is not set there is no caller to
ib_alloc_odp_umem() so let's remove it.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

A sub-range in ODP implicit MR should take its write permission from the
MR and not be set always to allow.

Fixes: d07d1d70 ("IB/umem: Update on demand page (ODP) support")
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

There is no reason for this __GFP_NOFAIL, none of the other routines in
this file use it, and there is an error unwind here. NOFAIL should be
reserved for special cases, not used by network drivers.

Fixes: 6a0b6174 ("rdma/cxgb4: Add support for kernel mode SRQ's")
Reported-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

This patch avoids that sparse complains about missing function
declarations.

Fixes: c9990ab3 ("RDMA/umem: Move all the ODP related stuff out of ucontext and into per_mm")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

This patch avoids that sparse complains about missing function
declarations.

Fixes: f27a0d50 ("RDMA/umem: Use umem->owning_mm inside ODP")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Parvi Kaustubhi <pkaustub@cisco.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

The macro was just making things harder to follow, and audit, so remove
it and call debugfs_create_file() directly.  Also, the macro did not
need to warn about the call failing as no one should ever care about any
debugfs functions failing.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

As the comment block of nonseekable_open() describes, nonseekable_open()
can never fail. Several places in kernel depend on this behavior.
Therefore, simplify the umad module to depend on this basic kernel
functionality.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

ib_umad_init_port_dev() holds the reference of a ib_umad_device instance.
ib_umad_device contains standard core device and cdev.  cdev holds the
reference of its parent core device.  file ops holds the reference to cdev
using core kernel.

Therefore, there is no need to hold additional reference while opening
umad related char devices.

While at it, add comments to bring clarity on releasing references to
ib_umd_device.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Two flow specifications can set the ip protocol field in
the flow table entry:

1) IB_FLOW_SPEC_TCP/UDP/GRE - set the ip protocol accordingly.
2) IB_FLOW_SPEC_IPV4/6 - has ip_protocol field for users
who want to receive specific L4 packets.

We need to avoid overriding of the ip_protocol with zeros,
in case that the user first put the L4 specification and
only then the L3.

Fixes: ca0d4753 ('IB/mlx5: Add support in TOS and protocol to flow steering')
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Add support for ODP for DEVX indirection mkey, it includes:
- Recognizing its type as part of the radix tree lookup.
- Use similar flow as done for the MW MKEY type.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Manage indirection mkey upon DEVX flow to support ODP.

To support a page fault event on the indirection mkey it needs to be part
of the device mkey radix tree.

Both the creation and the deletion flows for a DEVX object which is
indirection mkey were adapted to handle that.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Once an indirection MKEY is created umem valid bit shouldn't be set as
this MKEY doesn't really hold a umem.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

AEQ overflow will be reported by hardware when too many asynchronous
events occurred but not be handled in time.  Normally, AEQ overflow error
is not easy to occur. Once happened, we have to do physical function reset
to recover.  PF reset is implemented in two steps. Firstly, set reset
level with ae_dev->ops->set_default_reset_request.  Secondly, run reset
with ae_dev->ops->reset_event.
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

The variable rxe in the function is not used. So it is removed.
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

ib_dma_map_sg() augments the SGL into a 'dma mapped SGL'. This process may
change the number of entries and the lengths of each entry.

Code that touches dma_address is iterating over the 'dma mapped SGL' and
must use dma_nents which returned from ib_dma_map_sg().

ib_sg_to_pages() and ib_map_mr_sg() are using dma_address so they must use
dma_nents.

Fixes: 39405885 ("IB/iser: Port to new fast registration API")
Fixes: bfe066e2 ("IB/iser: Reuse ib_sg_to_pages")
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Remove unneeded semicolons.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

These fields were missing from the trace.  Add them.

Fixes: c6ad9482 ("IB/rdmavt: Add tracing for cq entry and poll")
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA cgroup registration routine always returns success, so simplify
function to be void and run clang formatter over whole CONFIG_CGROUP_RDMA
art of core_priv.h.

This reduces unwinding error path for regular registration and future net
namespace change functionality for rdma device.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/infiniband/hw/qedr/verbs.c: In function 'qedr_create_srq':
drivers/infiniband/hw/qedr/verbs.c:1436:22: warning:
 variable 'ib_ctx' set but not used [-Wunused-but-set-variable]

drivers/infiniband/hw/qedr/verbs.c: In function 'qedr_create_user_qp':
drivers/infiniband/hw/qedr/verbs.c:1701:22: warning:
 variable 'ib_ctx' set but not used [-Wunused-but-set-variable]

Fixes: b0ea0fa5 ("IB/{core,hw}: Have ib_umem_get extract the ib_ucontext from ib_udata")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

No reason to open code this loop.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>

When flush cqe, it needs to get the pointer of rq and sq from db address
space of user and update it into qp context by modified qp. if rq does not
exist, it will not get the value from db address space of user.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Replace kzalloc() function with its 2-factor argument form, kcalloc().

This patch replaces cases of:

	kzalloc(a * b, gfp)

with:
	kcalloc(a, b, gfp)

This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

The patch 944661dd: "RDMA/iw_cxgb4: atomically lookup ep and get a
reference" from May 6, 2016, leads to the following Smatch complaint:

    drivers/infiniband/hw/cxgb4/cm.c:2953 terminate()
    error: we previously assumed 'ep' could be null (see line 2945)

Fixes: 944661dd ("RDMA/iw_cxgb4: atomically lookup ep and get a reference")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Raju Rangoju <rajur@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

If cma_acquire_dev_by_src_ip() returns error in addr_handler(), the
device state changes back to RDMA_CM_ADDR_BOUND but the resolved source
IP address is still left. After that, if rdma_destroy_id() is called
after rdma_listen(), the device is freed without removed from
listen_any_list in cma_cancel_operation(). Revert to the previous IP
address if acquiring device fails.

Reported-by: syzbot+f3ce716af730c8f96637@syzkaller.appspotmail.com
Signed-off-by: Myungho Jung <mhjungk@gmail.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

This is from static analysis not from testing.  Depending on the value
of rcfw->cmdq_depth, then this might not cause an issue at runtime.

The BITS_TO_LONGS() macro tells us how many longs it take to hold a
bitmap.  In other words, it divides by the number if bits per long and
rounds up.  Then we want to take that number and multiple by
sizeof(long) to get the number of bytes to allocate.

The code here does the multiplication first so the rounding up is done
in the wrong place.  So imagine we want to allocate 1 bit, then
"(1 * 8) / 64 = 1" when we round up.  But it should be
"(1 / 64) * 8 = 8".  In other words, because of the rounding difference
we might allocate up to "sizeof(long) - 1" bytes fewer than intended.

Fixes: 1ac5a404 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-By: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Introduce and use rdma_device_to_ibdev() API for those drivers which are
registering one sysfs group and also use in ib_core.

In subsequent patch, device->provider_ibdev one-to-one mapping is no
longer holds true during accessing sysfs entries.
Therefore, introduce an API rdma_device_to_ibdev() that provides such
information.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Most provider routines are callback routines which ib core invokes.
_callback suffix doesn't convey information about when such callback is
invoked. Therefore, rename port_callback to init_port.

Additionally, store the init_port function pointer in ib_device_ops, so
that it can be accessed in subsequent patches when binding rdma device to
net namespace.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

As part of an audit process to update drivers to use rdma_restrack_add()
ensure that CTX objects is cleared before access.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

As part of an audit process to update drivers to use rdma_restrack_add()
ensure that CQ objects is cleared before access.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

As part of an audit process to update drivers to use rdma_restrack_add()
ensure that PD objects is cleared before access.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

The pkey table size is QEDR_ROCE_PKEY_TABLE_LEN, index should be tested
for >= QEDR_ROCE_PKEY_TABLE_LEN instead of > QEDR_ROCE_PKEY_TABLE_LEN.

Fixes: a7efd777 ("qedr: Add support for PD,PKEY and CQ verbs")
Signed-off-by: Gal Pressman <galpress@amazon.com>
Acked-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

The pkey table size is one element, index should be tested for > 0 instead
of > 1.

Fixes: fe2caefc ("RDMA/ocrdma: Add driver for Emulex OneConnect IBoE RDMA adapter")
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>