According to documentation, the 64K erase opcode is located in VSCC
range [16:23] instead of [8:15].
Use the proper value to shift the mask over the correct range.
Signed-off-by: Mauro Lima <mauro.lima@eclypsium.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20221012152135.28353-1-mauro.lima@eclypsium.comSigned-off-by: Mark Brown <broonie@kernel.org>

Both quad SPI TX and RX modes can be supported on AST2600.
Correct typo in mode_bits field in both ast2600_fmc_data
and ast2600_spi_data structs.
Signed-off-by: Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Link: https://lore.kernel.org/r/20221005083209.222272-1-chin-ting_kuo@aspeedtech.comSigned-off-by: Mark Brown <broonie@kernel.org>

NO_IRQ is used to check the return of irq_of_parse_and_map().

On some architecture NO_IRQ is 0, on other architectures it is -1.

irq_of_parse_and_map() returns 0 on error, independent of NO_IRQ.

So use 0 instead of using NO_IRQ.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/f41e09d710879726eacb98daedf16d0847303b9b.1665034444.git.christophe.leroy@csgroup.euSigned-off-by: Mark Brown <broonie@kernel.org>

In this instance, "or" makes more sense than "of", so I guess that "or"
was intended and "of" was a typo.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Link: https://lore.kernel.org/r/20221008151459.1421406-1-j.neuschaefer@gmx.netSigned-off-by: Mark Brown <broonie@kernel.org>

Use '-' instead of '=' in identifier: "GPL-2.0-or-later"
Signed-off-by: Tim Bird <tim.bird@sony.com>
Link: https://lore.kernel.org/r/BYAPR13MB2503FF6412666D29FEAC8DCDFD5B9@BYAPR13MB2503.namprd13.prod.outlook.comSigned-off-by: Mark Brown <broonie@kernel.org>

Return value should be updated to zero in combined sequence routine
if transfer is completed successfully. Currently it holds timeout value
resulting in errors.
Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com>
Link: https://lore.kernel.org/r/20221001122148.9158-1-kyarlagadda@nvidia.comSigned-off-by: Mark Brown <broonie@kernel.org>

SPI code checks for non-zero sgt->orig_nents to determine if the buffer
has been DMA-mapped. Ensure that sg_table is really zeroed after free to
avoid potential NULL pointer dereference if the given SPI xfer object is
reused again without being DMA-mapped.

Fixes: 0c17ba73 ("spi: Fix cache corruption due to DMA/PIO overlap")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20220930113408.19720-1-m.szyprowski@samsung.comSigned-off-by: Mark Brown <broonie@kernel.org>

Use the devm_platform_ioremap_resource() helper instead of calling
platform_get_resource() and devm_ioremap_resource() separately.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220928145256.1879256-1-yangyingliang@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

The COUNT_VALUE in the PACKET_CNT register is 16-bit so the maximum
value is 65535.  Asking the driver to transfer a larger size currently
leads to the DMA transfer timing out.  Implement ->max_transfer_size()
and have the core split the transfer as needed.

Fixes: 230d42d4 ("spi: Add s3c64xx SPI Controller driver")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Link: https://lore.kernel.org/r/20220927112117.77599-5-vincent.whitchurch@axis.comSigned-off-by: Mark Brown <broonie@kernel.org>

A couple of drivers call spi_split_transfers_maxsize() from their
->prepare_message() callbacks to split transfers which are too big for
them to handle.  Add support in the core to do this based on
->max_transfer_size() to avoid code duplication.
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Link: https://lore.kernel.org/r/20220927112117.77599-4-vincent.whitchurch@axis.comSigned-off-by: Mark Brown <broonie@kernel.org>

The SPI core DMA mapping support performs cache management once for the
entire message and not between transfers, and this leads to cache
corruption if a message has two or more RX transfers with both
transfers targeting the same cache line, and the controller driver
decides to handle one using DMA and the other using PIO (for example,
because one is much larger than the other).

Fix it by syncing before/after the actual transfers.  This also means
that we can skip the sync during the map/unmap of the message.

Fixes: 99adef31 ("spi: Provide core support for DMA mapping transfers")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Link: https://lore.kernel.org/r/20220927112117.77599-3-vincent.whitchurch@axis.comSigned-off-by: Mark Brown <broonie@kernel.org>

Save the current RX and TX DMA devices to avoid having to duplicate the
logic to pick them, since we'll need access to them in some more
functions to fix a bug in the cache handling.
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Link: https://lore.kernel.org/r/20220927112117.77599-2-vincent.whitchurch@axis.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add spi dma max segment size declaration according to spi
hardware capability, instead of 64KB by system default
setting, to improve bus bandwidth for mass data transmission.
Signed-off-by: zhichao.liu <zhichao.liu@mediatek.com>
Link: https://lore.kernel.org/r/20220927083248.25404-1-zhichao.liu@mediatek.comSigned-off-by: Mark Brown <broonie@kernel.org>

SoC MT7621 SPI bindings used text format, so migrate them to YAML.
There are some additions to the binding that were not in the original
file. This binding is used in MT7621 and MT7628a Ralink SoCs. To
properly match both dts nodes in tree we need to add to the schema
'clocks', 'clock-names' and 'reset-names'. Both 'clock-names' and
'reset-names' use 'spi' as string so maintain that as const in
the schema.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20220927031929.807070-1-sergio.paracuellos@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

Document support for the Clock-Synchronized Serial Interface with FIFO
(MSIOF) in the Renesas R-Car V4H (R8A779G0) SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/a840ca8487cfd612fae2b20c98e93ae7c7f50ef4.1664204638.git.geert+renesas@glider.beSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Zhang Qilong <zhangqilong3@huawei.com>:

The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed when error returns to keep it
balanced. This series of patches fixed it in spi probe.

Use the devm_platform_ioremap_resource_byname() helper instead of
calling platform_get_resource_byname() and devm_ioremap_resource()
separately.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220924131854.964923-3-yangyingliang@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

Use the devm_platform_get_and_ioremap_resource() helper instead of calling
platform_get_resource() and devm_ioremap_resource() separately.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220924131854.964923-2-yangyingliang@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

Use the devm_platform_get_and_ioremap_resource() helper instead of calling
platform_get_resource() and devm_ioremap_resource() separately.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220924131854.964923-1-yangyingliang@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context.

Fixes:db91841b ("spi/omap100k: Convert to runtime PM")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20220924121310.78331-4-zhangqilong3@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context.

Fixes:abf00907 ("spi: dw: Add Baikal-T1 SPI Controller glue driver")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20220924121310.78331-3-zhangqilong3@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context.

Fixes:73d5fe04 ("spi: cadence-quadspi: Remove spi_master_put() in probe failure path")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20220924121310.78331-2-zhangqilong3@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

Switch to use devm_spi_alloc_master() to simpify error path.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220920142216.3002291-1-yangyingliang@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

Switch to use devm_spi_alloc_master() to simpify error path.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Link: https://lore.kernel.org/r/20220920114615.2681751-1-yangyingliang@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

Using the newest pm_runtime_resume_and_get is more appropriate
for simplifing code here.
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20220922150232.115843-1-zhangqilong3@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

devm_ioremap_resource() prints error message in itself. Remove the
dev_err call to avoid redundant error message.
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Link: https://lore.kernel.org/r/20220923101632.19170-1-shangxiaojing@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

This switches the driver to use gpiod API instead of legacy gpio API,
which will brings us close to removing of_get_gpio() and other
OF-specific old APIs.

No functional change intended beyond some differences in error messages.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/Yy07WbMAG4bPgYNd@google.comSigned-off-by: Mark Brown <broonie@kernel.org>

devm_ioremap_resource() prints error message in itself. Remove the
dev_err call to avoid redundant error message.
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Link: https://lore.kernel.org/r/20220923101726.19420-1-shangxiaojing@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

Switch to use devm_spi_alloc_master() to simpify error path.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Tested-by: Max Filippov <jcmvbkbc@gmail.com>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Link: https://lore.kernel.org/r/20220920114448.2681053-1-yangyingliang@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

The sparse tool complains as follows:

drivers/spi/spi-meson-spicc.c:570:22: warning:
 symbol 'meson_spicc_pow2_clk_ops' was not declared. Should it be static?

This symbol is not used outside of spi-meson-spicc.c, so marks it static.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20220922040807.1409540-1-weiyongjun@huaweicloud.comSigned-off-by: Mark Brown <broonie@kernel.org>

This condition was accidentally changed from "if (status < 0)" to
"if (status)".  The platform_get_irq() function returns non-zero
positive values on success so, unfortunately, the driver could not be
used.  Change the condition back to how it was.

Fixes: f4ca8c88 ("spi: omap2-mcspi: Switch to use dev_err_probe() helper")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/Yyq8Q/kd301wVzg8@kiliSigned-off-by: Mark Brown <broonie@kernel.org>

Add a test where a small and a large transfer in a message hit the same
cache line.  This test currently fails on spi-s3c64xx on in DMA mode
since it ends up mixing DMA and PIO without proper cache maintenance.
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Link: https://lore.kernel.org/r/20220916113951.228398-2-vincent.whitchurch@axis.comSigned-off-by: Mark Brown <broonie@kernel.org>

In the probe path, dev_err() can be replace with dev_err_probe()
which will check if error code is -EPROBE_DEFER and prints the
error name.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220917122504.1896302-1-yangyingliang@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

As a preparation to unexport of_gpio_named_count(), convert the
driver to use gpiod_count() instead.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220914153333.37701-1-andriy.shevchenko@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Let the core handle all the chipselect bakery and replace
transfer_one_message() by transfer_one() and prepare_message().

At the time being, there is fsl_spi_cs_control() to handle
chipselects. That function handles both GPIO and non-GPIO
chipselects. The GPIO chipselects will now be handled by
the core directly, so only handle non-GPIO chipselects and
hook it to ->set_cs
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/753266abafe81722d86c3ddb8bac8ef1cb00fe8c.1660829841.git.christophe.leroy@csgroup.euSigned-off-by: Mark Brown <broonie@kernel.org>

The Rockchip rk3399 TRM mentions that pd_sdioaudio includes
sdio, spi, i2s and spdif. Add a power-domains property to
to match reality with spi-rockchip.yaml.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/12af4fe6-4d35-cb4a-f5f6-06e3aba990cb@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add rockchip,rk3128-spi compatible string.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/c05fb9a3-ebf7-adec-e8ca-bd137d157f50@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

Linux 6.0-rc4 so we can test on BeagleBone again.

The commit 5e0531f6 ("spi: Add capability to perform some transfer
with chipselect off") added a new flag but squeezed it into a wrong
group of struct spi_transfer members (note that SPI_NBITS_* are macros
for easier interpretation of the tx_nbits and rx_nbits bitfields).

Group cs_change and cs_off flags together and their doc strings.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220908130518.32186-1-andriy.shevchenko@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Since [1], controller's busy flag isn't set anymore when the
__spi_transfer_message_noqueue() is used instead of the
__spi_pump_transfer_message() logic for spi_sync transfers.

Since the pow2 clock ops were limited to only be available when a
transfer is ongoing (between prepare_transfer_hardware and
unprepare_transfer_hardware callbacks), the only way to track this
down is to check for the controller cur_msg.

[1] ae7d2346 ("spi: Don't use the message queue if possible in spi_sync")

Fixes: 09992025 ("spi: meson-spicc: add local pow2 clock ops to preserve rate between messages")
Fixes: ae7d2346 ("spi: Don't use the message queue if possible in spi_sync")
Reported-by: Markus Schneider-Pargmann <msp@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://lore.kernel.org/r/20220908121803.919943-1-narmstrong@baylibre.comSigned-off-by: Mark Brown <broonie@kernel.org>