- 07 Oct, 2019 17 commits
-
-
Vlastimil Babka authored
Patch series "guarantee natural alignment for kmalloc()", v2. This patch (of 2): SLOB currently doesn't account its pages at all, so in /proc/meminfo the Slab field shows zero. Modifying a counter on page allocation and freeing should be acceptable even for the small system scenarios SLOB is intended for. Since reclaimable caches are not separated in SLOB, account everything as unreclaimable. SLUB currently doesn't account kmalloc() and kmalloc_node() allocations larger than order-1 page, that are passed directly to the page allocator. As they also don't appear in /proc/slabinfo, it might look like a memory leak. For consistency, account them as well. (SLAB doesn't actually use page allocator directly, so no change there). Ideally SLOB and SLUB would be handled in separate patches, but due to the shared kmalloc_order() function and different kfree() implementations, it's easier to patch both at once to prevent inconsistencies. Link: http://lkml.kernel.org/r/20190826111627.7505-2-vbabka@suse.czSigned-off-by:
Vlastimil Babka <vbabka@suse.cz> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Ming Lei <ming.lei@redhat.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: "Darrick J . Wong" <darrick.wong@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Chris Down authored
This patch is an incremental improvement on the existing memory.{low,min} relative reclaim work to base its scan pressure calculations on how much protection is available compared to the current usage, rather than how much the current usage is over some protection threshold. This change doesn't change the experience for the user in the normal case too much. One benefit is that it replaces the (somewhat arbitrary) 100% cutoff with an indefinite slope, which makes it easier to ballpark a memory.low value. As well as this, the old methodology doesn't quite apply generically to machines with varying amounts of physical memory. Let's say we have a top level cgroup, workload.slice, and another top level cgroup, system-management.slice. We want to roughly give 12G to system-management.slice, so on a 32GB machine we set memory.low to 20GB in workload.slice, and on a 64GB machine we set memory.low to 52GB. However, because these are relative amounts to the total machine size, while the amount of memory we want to generally be willing to yield to system.slice is absolute (12G), we end up putting more pressure on system.slice just because we have a larger machine and a larger workload to fill it, which seems fairly unintuitive. With this new behaviour, we don't end up with this unintended side effect. Previously the way that memory.low protection works is that if you are 50% over a certain baseline, you get 50% of your normal scan pressure. This is certainly better than the previous cliff-edge behaviour, but it can be improved even further by always considering memory under the currently enforced protection threshold to be out of bounds. This means that we can set relatively low memory.low thresholds for variable or bursty workloads while still getting a reasonable level of protection, whereas with the previous version we may still trivially hit the 100% clamp. The previous 100% clamp is also somewhat arbitrary, whereas this one is more concretely based on the currently enforced protection threshold, which is likely easier to reason about. There is also a subtle issue with the way that proportional reclaim worked previously -- it promotes having no memory.low, since it makes pressure higher during low reclaim. This happens because we base our scan pressure modulation on how far memory.current is between memory.min and memory.low, but if memory.low is unset, we only use the overage method. In most cromulent configurations, this then means that we end up with *more* pressure than with no memory.low at all when we're in low reclaim, which is not really very usable or expected. With this patch, memory.low and memory.min affect reclaim pressure in a more understandable and composable way. For example, from a user standpoint, "protected" memory now remains untouchable from a reclaim aggression standpoint, and users can also have more confidence that bursty workloads will still receive some amount of guaranteed protection. Link: http://lkml.kernel.org/r/20190322160307.GA3316@chrisdown.nameSigned-off-by:Chris Down <chris@chrisdown.name> Reviewed-by:
Roman Gushchin <guro@fb.com> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Acked-by:
Michal Hocko <mhocko@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Dennis Zhou <dennis@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by:
-
Chris Down authored
Roman points out that when when we do the low reclaim pass, we scale the reclaim pressure relative to position between 0 and the maximum protection threshold. However, if the maximum protection is based on memory.elow, and memory.emin is above zero, this means we still may get binary behaviour on second-pass low reclaim. This is because we scale starting at 0, not starting at memory.emin, and since we don't scan at all below emin, we end up with cliff behaviour. This should be a fairly uncommon case since usually we don't go into the second pass, but it makes sense to scale our low reclaim pressure starting at emin. You can test this by catting two large sparse files, one in a cgroup with emin set to some moderate size compared to physical RAM, and another cgroup without any emin. In both cgroups, set an elow larger than 50% of physical RAM. The one with emin will have less page scanning, as reclaim pressure is lower. Rebase on top of and apply the same idea as what was applied to handle cgroup_memory=disable properly for the original proportional patch http://lkml.kernel.org/r/20190201045711.GA18302@chrisdown.name ("mm, memcg: Handle cgroup_disable=memory when getting memcg protection"). Link: http://lkml.kernel.org/r/20190201051810.GA18895@chrisdown.nameSigned-off-by:
-
Chris Down authored
cgroup v2 introduces two memory protection thresholds: memory.low (best-effort) and memory.min (hard protection). While they generally do what they say on the tin, there is a limitation in their implementation that makes them difficult to use effectively: that cliff behaviour often manifests when they become eligible for reclaim. This patch implements more intuitive and usable behaviour, where we gradually mount more reclaim pressure as cgroups further and further exceed their protection thresholds. This cliff edge behaviour happens because we only choose whether or not to reclaim based on whether the memcg is within its protection limits (see the use of mem_cgroup_protected in shrink_node), but we don't vary our reclaim behaviour based on this information. Imagine the following timeline, with the numbers the lruvec size in this zone: 1. memory.low=1000000, memory.current=999999. 0 pages may be scanned. 2. memory.low=1000000, memory.current=1000000. 0 pages may be scanned. 3. memory.low=1000000, memory.current=1000001. 1000001* pages may be scanned. (?!) * Of course, we won't usually scan all available pages in the zone even without this patch because of scan control priority, over-reclaim protection, etc. However, as shown by the tests at the end, these techniques don't sufficiently throttle such an extreme change in input, so cliff-like behaviour isn't really averted by their existence alone. Here's an example of how this plays out in practice. At Facebook, we are trying to protect various workloads from "system" software, like configuration management tools, metric collectors, etc (see this[0] case study). In order to find a suitable memory.low value, we start by determining the expected memory range within which the workload will be comfortable operating. This isn't an exact science -- memory usage deemed "comfortable" will vary over time due to user behaviour, differences in composition of work, etc, etc. As such we need to ballpark memory.low, but doing this is currently problematic: 1. If we end up setting it too low for the workload, it won't have *any* effect (see discussion above). The group will receive the full weight of reclaim and won't have any priority while competing with the less important system software, as if we had no memory.low configured at all. 2. Because of this behaviour, we end up erring on the side of setting it too high, such that the comfort range is reliably covered. However, protected memory is completely unavailable to the rest of the system, so we might cause undue memory and IO pressure there when we *know* we have some elasticity in the workload. 3. Even if we get the value totally right, smack in the middle of the comfort zone, we get extreme jumps between no pressure and full pressure that cause unpredictable pressure spikes in the workload due to the current binary reclaim behaviour. With this patch, we can set it to our ballpark estimation without too much worry. Any undesirable behaviour, such as too much or too little reclaim pressure on the workload or system will be proportional to how far our estimation is off. This means we can set memory.low much more conservatively and thus waste less resources *without* the risk of the workload falling off a cliff if we overshoot. As a more abstract technical description, this unintuitive behaviour results in having to give high-priority workloads a large protection buffer on top of their expected usage to function reliably, as otherwise we have abrupt periods of dramatically increased memory pressure which hamper performance. Having to set these thresholds so high wastes resources and generally works against the principle of work conservation. In addition, having proportional memory reclaim behaviour has other benefits. Most notably, before this patch it's basically mandatory to set memory.low to a higher than desirable value because otherwise as soon as you exceed memory.low, all protection is lost, and all pages are eligible to scan again. By contrast, having a gradual ramp in reclaim pressure means that you now still get some protection when thresholds are exceeded, which means that one can now be more comfortable setting memory.low to lower values without worrying that all protection will be lost. This is important because workingset size is really hard to know exactly, especially with variable workloads, so at least getting *some* protection if your workingset size grows larger than you expect increases user confidence in setting memory.low without a huge buffer on top being needed. Thanks a lot to Johannes Weiner and Tejun Heo for their advice and assistance in thinking about how to make this work better. In testing these changes, I intended to verify that: 1. Changes in page scanning become gradual and proportional instead of binary. To test this, I experimented stepping further and further down memory.low protection on a workload that floats around 19G workingset when under memory.low protection, watching page scan rates for the workload cgroup: +------------+-----------------+--------------------+--------------+ | memory.low | test (pgscan/s) | control (pgscan/s) | % of control | +------------+-----------------+--------------------+--------------+ | 21G | 0 | 0 | N/A | | 17G | 867 | 3799 | 23% | | 12G | 1203 | 3543 | 34% | | 8G | 2534 | 3979 | 64% | | 4G | 3980 | 4147 | 96% | | 0 | 3799 | 3980 | 95% | +------------+-----------------+--------------------+--------------+ As you can see, the test kernel (with a kernel containing this patch) ramps up page scanning significantly more gradually than the control kernel (without this patch). 2. More gradual ramp up in reclaim aggression doesn't result in premature OOMs. To test this, I wrote a script that slowly increments the number of pages held by stress(1)'s --vm-keep mode until a production system entered severe overall memory contention. This script runs in a highly protected slice taking up the majority of available system memory. Watching vmstat revealed that page scanning continued essentially nominally between test and control, without causing forward reclaim progress to become arrested. [0]: https://facebookmicrosites.github.io/cgroup2/docs/overview.html#case-study-the-fbtax2-project [akpm@linux-foundation.org: reflow block comments to fit in 80 cols] [chris@chrisdown.name: handle cgroup_disable=memory when getting memcg protection] Link: http://lkml.kernel.org/r/20190201045711.GA18302@chrisdown.name Link: http://lkml.kernel.org/r/20190124014455.GA6396@chrisdown.nameSigned-off-by:
-
Dan Carpenter authored
The "mode" and "level" variables are enums and in this context GCC will treat them as unsigned ints so the error handling is never triggered. I also removed the bogus initializer because it isn't required any more and it's sort of confusing. [akpm@linux-foundation.org: reduce implicit and explicit typecasting] [akpm@linux-foundation.org: fix return value, add comment, per Matthew] Link: http://lkml.kernel.org/r/20190925110449.GO3264@mwanda Fixes: 3cadfa2b ("mm/vmpressure.c: convert to use match_string() helper") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by:
David Rientjes <rientjes@google.com> Reviewed-by:
Matthew Wilcox <willy@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Enrico Weigelt <info@metux.net> Cc: Kate Stewart <kstewart@linuxfoundation.org> Signed-off-by:
-
Qian Cai authored
On architectures like s390, arch_free_page() could mark the page unused (set_page_unused()) and any access later would trigger a kernel panic. Fix it by moving arch_free_page() after all possible accessing calls. Hardware name: IBM 2964 N96 400 (z/VM 6.4.0) Krnl PSW : 0404e00180000000 0000000026c2b96e (__free_pages_ok+0x34e/0x5d8) R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3 Krnl GPRS: 0000000088d43af7 0000000000484000 000000000000007c 000000000000000f 000003d080012100 000003d080013fc0 0000000000000000 0000000000100000 00000000275cca48 0000000000000100 0000000000000008 000003d080010000 00000000000001d0 000003d000000000 0000000026c2b78a 000000002717fdb0 Krnl Code: 0000000026c2b95c: ec1100b30659 risbgn %r1,%r1,0,179,6 0000000026c2b962: e32014000036 pfd 2,1024(%r1) #0000000026c2b968: d7ff10001000 xc 0(256,%r1),0(%r1) >0000000026c2b96e: 41101100 la %r1,256(%r1) 0000000026c2b972: a737fff8 brctg %r3,26c2b962 0000000026c2b976: d7ff10001000 xc 0(256,%r1),0(%r1) 0000000026c2b97c: e31003400004 lg %r1,832 0000000026c2b982: ebff1430016a asi 5168(%r1),-1 Call Trace: __free_pages_ok+0x16a/0x5d8) memblock_free_all+0x206/0x290 mem_init+0x58/0x120 start_kernel+0x2b0/0x570 startup_continue+0x6a/0xc0 INFO: lockdep is turned off. Last Breaking-Event-Address: __free_pages_ok+0x372/0x5d8 Kernel panic - not syncing: Fatal exception: panic_on_oops 00: HCPGIR450W CP entered; disabled wait PSW 00020001 80000000 00000000 26A2379C In the past, only kernel_poison_pages() would trigger this but it needs "page_poison=on" kernel cmdline, and I suspect nobody tested that on s390. Recently, kernel_init_free_pages() (commit 6471384a ("mm: security: introduce init_on_alloc=1 and init_on_free=1 boot options")) was added and could trigger this as well. [akpm@linux-foundation.org: add comment] Link: http://lkml.kernel.org/r/1569613623-16820-1-git-send-email-cai@lca.pw Fixes: 8823b1db ("mm/page_poison.c: enable PAGE_POISONING as a separate option") Fixes: 6471384a ("mm: security: introduce init_on_alloc=1 and init_on_free=1 boot options") Signed-off-by:Qian Cai <cai@lca.pw> Reviewed-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by:
Christian Borntraeger <borntraeger@de.ibm.com> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: <stable@vger.kernel.org> [5.3+] Signed-off-by:
-
Vitaly Wool authored
There's a really hard to reproduce race in z3fold between z3fold_free() and z3fold_reclaim_page(). z3fold_reclaim_page() can claim the page after z3fold_free() has checked if the page was claimed and z3fold_free() will then schedule this page for compaction which may in turn lead to random page faults (since that page would have been reclaimed by then). Fix that by claiming page in the beginning of z3fold_free() and not forgetting to clear the claim in the end. [vitalywool@gmail.com: v2] Link: http://lkml.kernel.org/r/20190928113456.152742cf@bigdell Link: http://lkml.kernel.org/r/20190926104844.4f0c6efa1366b8f5741eaba9@gmail.comSigned-off-by:
Vitaly Wool <vitalywool@gmail.com> Reported-by:
Markus Linnala <markus.linnala@gmail.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Henry Burns <henrywolfeburns@gmail.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Markus Linnala <markus.linnala@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Michal Hocko authored
Partially revert 16db3d3f ("kernel/sysctl.c: threads-max observe limits") because the patch is causing a regression to any workload which needs to override the auto-tuning of the limit provided by kernel. set_max_threads is implementing a boot time guesstimate to provide a sensible limit of the concurrently running threads so that runaways will not deplete all the memory. This is a good thing in general but there are workloads which might need to increase this limit for an application to run (reportedly WebSpher MQ is affected) and that is simply not possible after the mentioned change. It is also very dubious to override an admin decision by an estimation that doesn't have any direct relation to correctness of the kernel operation. Fix this by dropping set_max_threads from sysctl_max_threads so any value is accepted as long as it fits into MAX_THREADS which is important to check because allowing more threads could break internal robust futex restriction. While at it, do not use MIN_THREADS as the lower boundary because it is also only a heuristic for automatic estimation and admin might have a good reason to stop new threads to be created even when below this limit. This became more severe when we switched x86 from 4k to 8k kernel stacks. Starting since 6538b8ea ("x86_64: expand kernel stack to 16K") (3.16) we use THREAD_SIZE_ORDER = 2 and that halved the auto-tuned value. In the particular case 3.12 kernel.threads-max = 515561 4.4 kernel.threads-max = 200000 Neither of the two values is really insane on 32GB machine. I am not sure we want/need to tune the max_thread value further. If anything the tuning should be removed altogether if proven not useful in general. But we definitely need a way to override this auto-tuning. Link: http://lkml.kernel.org/r/20190922065801.GB18814@dhcp22.suse.cz Fixes: 16db3d3f ("kernel/sysctl.c: threads-max observe limits") Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Baoquan He authored
In kdump kernel, memcg usually is disabled with 'cgroup_disable=memory' for saving memory. Now kdump kernel will always panic when dump vmcore to local disk: BUG: kernel NULL pointer dereference, address: 0000000000000ab8 Oops: 0000 [#1] SMP NOPTI CPU: 0 PID: 598 Comm: makedumpfile Not tainted 5.3.0+ #26 Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 10/02/2018 RIP: 0010:mem_cgroup_track_foreign_dirty_slowpath+0x38/0x140 Call Trace: __set_page_dirty+0x52/0xc0 iomap_set_page_dirty+0x50/0x90 iomap_write_end+0x6e/0x270 iomap_write_actor+0xce/0x170 iomap_apply+0xba/0x11e iomap_file_buffered_write+0x62/0x90 xfs_file_buffered_aio_write+0xca/0x320 [xfs] new_sync_write+0x12d/0x1d0 vfs_write+0xa5/0x1a0 ksys_write+0x59/0xd0 do_syscall_64+0x59/0x1e0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 And this will corrupt the 1st kernel too with 'cgroup_disable=memory'. Via the trace and with debugging, it is pointing to commit 97b27821 ("writeback, memcg: Implement foreign dirty flushing") which introduced this regression. Disabling memcg causes the null pointer dereference at uninitialized data in function mem_cgroup_track_foreign_dirty_slowpath(). Fix it by returning directly if memcg is disabled, but not trying to record the foreign writebacks with dirty pages. Link: http://lkml.kernel.org/r/20190924141928.GD31919@MiWiFi-R3L-srv Fixes: 97b27821 ("writeback, memcg: Implement foreign dirty flushing") Signed-off-by:
Baoquan He <bhe@redhat.com> Acked-by:
-
Yi Wang authored
We get two warnings when build kernel W=1: mm/shuffle.c:36:12: warning: no previous prototype for `shuffle_show' [-Wmissing-prototypes] mm/sparse.c:220:6: warning: no previous prototype for `subsection_mask_set' [-Wmissing-prototypes] Make the functions static to fix this. Link: http://lkml.kernel.org/r/1566978161-7293-1-git-send-email-wang.yi59@zte.com.cnSigned-off-by:
Yi Wang <wang.yi59@zte.com.cn> Reviewed-by:
David Hildenbrand <david@redhat.com> Reviewed-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Tejun Heo authored
finish_writeback_work() reads @done->waitq after decrementing @done->cnt. However, once @done->cnt reaches zero, @done may be freed (from stack) at any moment and @done->waitq can contain something unrelated by the time finish_writeback_work() tries to read it. This led to the following crash. "BUG: kernel NULL pointer dereference, address: 0000000000000002" #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP DEBUG_PAGEALLOC CPU: 40 PID: 555153 Comm: kworker/u98:50 Kdump: loaded Not tainted ... Workqueue: writeback wb_workfn (flush-btrfs-1) RIP: 0010:_raw_spin_lock_irqsave+0x10/0x30 Code: 48 89 d8 5b c3 e8 50 db 6b ff eb f4 0f 1f 40 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 53 9c 5b fa 31 c0 ba 01 00 00 00 <f0> 0f b1 17 75 05 48 89 d8 5b c3 89 c6 e8 fe ca 6b ff eb f2 66 90 RSP: 0018:ffffc90049b27d98 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000246 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000003 RDI: 0000000000000002 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000001 R10: ffff889fff407600 R11: ffff88ba9395d740 R12: 000000000000e300 R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88bfdfa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000002 CR3: 0000000002409005 CR4: 00000000001606e0 Call Trace: __wake_up_common_lock+0x63/0xc0 wb_workfn+0xd2/0x3e0 process_one_work+0x1f5/0x3f0 worker_thread+0x2d/0x3d0 kthread+0x111/0x130 ret_from_fork+0x1f/0x30 Fix it by reading and caching @done->waitq before decrementing @done->cnt. Link: http://lkml.kernel.org/r/20190924010631.GH2233839@devbig004.ftw2.facebook.com Fixes: 5b9cce4c ("writeback: Generalize and expose wb_completion") Signed-off-by:
Tejun Heo <tj@kernel.org> Debugged-by:
Chris Mason <clm@fb.com> Reviewed-by:
Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: <stable@vger.kernel.org> [5.2+] Signed-off-by:
-
Anshuman Khandual authored
SECTION_SIZE and SECTION_MASK macros are not getting used anymore. But they do conflict with existing definitions on arm64 platform causing following warning during build. Lets drop these unused macros. mm/memremap.c:16: warning: "SECTION_MASK" redefined #define SECTION_MASK ~((1UL << PA_SECTION_SHIFT) - 1) arch/arm64/include/asm/pgtable-hwdef.h:79: note: this is the location of the previous definition #define SECTION_MASK (~(SECTION_SIZE-1)) mm/memremap.c:17: warning: "SECTION_SIZE" redefined #define SECTION_SIZE (1UL << PA_SECTION_SHIFT) arch/arm64/include/asm/pgtable-hwdef.h:78: note: this is the location of the previous definition #define SECTION_SIZE (_AC(1, UL) << SECTION_SHIFT) Link: http://lkml.kernel.org/r/1569312010-31313-1-git-send-email-anshuman.khandual@arm.comSigned-off-by:
Anshuman Khandual <anshuman.khandual@arm.com> Reported-by:
kbuild test robot <lkp@intel.com> Reviewed-by:
-
Will Deacon authored
Calling 'panic()' on a kernel with CONFIG_PREEMPT=y can leave the calling CPU in an infinite loop, but with interrupts and preemption enabled. From this state, userspace can continue to be scheduled, despite the system being "dead" as far as the kernel is concerned. This is easily reproducible on arm64 when booting with "nosmp" on the command line; a couple of shell scripts print out a periodic "Ping" message whilst another triggers a crash by writing to /proc/sysrq-trigger: | sysrq: Trigger a crash | Kernel panic - not syncing: sysrq triggered crash | CPU: 0 PID: 1 Comm: init Not tainted 5.2.15 #1 | Hardware name: linux,dummy-virt (DT) | Call trace: | dump_backtrace+0x0/0x148 | show_stack+0x14/0x20 | dump_stack+0xa0/0xc4 | panic+0x140/0x32c | sysrq_handle_reboot+0x0/0x20 | __handle_sysrq+0x124/0x190 | write_sysrq_trigger+0x64/0x88 | proc_reg_write+0x60/0xa8 | __vfs_write+0x18/0x40 | vfs_write+0xa4/0x1b8 | ksys_write+0x64/0xf0 | __arm64_sys_write+0x14/0x20 | el0_svc_common.constprop.0+0xb0/0x168 | el0_svc_handler+0x28/0x78 | el0_svc+0x8/0xc | Kernel Offset: disabled | CPU features: 0x0002,24002004 | Memory Limit: none | ---[ end Kernel panic - not syncing: sysrq triggered crash ]--- | Ping 2! | Ping 1! | Ping 1! | Ping 2! The issue can also be triggered on x86 kernels if CONFIG_SMP=n, otherwise local interrupts are disabled in 'smp_send_stop()'. Disable preemption in 'panic()' before re-enabling interrupts. Link: http://lkml.kernel.org/r/20191002123538.22609-1-will@kernel.org Link: https://lore.kernel.org/r/BX1W47JXPMR8.58IYW53H6M5N@dragonstoneSigned-off-by:
Will Deacon <will@kernel.org> Reported-by:
Xogium <contact@xogium.me> Reviewed-by:
-
Jia-Ju Bai authored
In ocfs2_info_scan_inode_alloc(), there is an if statement on line 283 to check whether inode_alloc is NULL: if (inode_alloc) When inode_alloc is NULL, it is used on line 287: ocfs2_inode_lock(inode_alloc, &bh, 0); ocfs2_inode_lock_full_nested(inode, ...) struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); Thus, a possible null-pointer dereference may occur. To fix this bug, inode_alloc is checked on line 286. This bug is found by a static analysis tool STCheck written by us. Link: http://lkml.kernel.org/r/20190726033717.32359-1-baijiaju1990@gmail.comSigned-off-by:Jia-Ju Bai <baijiaju1990@gmail.com> Reviewed-by:
Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by:
-
Jia-Ju Bai authored
In ocfs2_write_end_nolock(), there are an if statement on lines 1976, 2047 and 2058, to check whether handle is NULL: if (handle) When handle is NULL, it is used on line 2045: ocfs2_update_inode_fsync_trans(handle, inode, 1); oi->i_sync_tid = handle->h_transaction->t_tid; Thus, a possible null-pointer dereference may occur. To fix this bug, handle is checked before calling ocfs2_update_inode_fsync_trans(). This bug is found by a static analysis tool STCheck written by us. Link: http://lkml.kernel.org/r/20190726033705.32307-1-baijiaju1990@gmail.comSigned-off-by: -
Jia-Ju Bai authored
In ocfs2_xa_prepare_entry(), there is an if statement on line 2136 to check whether loc->xl_entry is NULL: if (loc->xl_entry) When loc->xl_entry is NULL, it is used on line 2158: ocfs2_xa_add_entry(loc, name_hash); loc->xl_entry->xe_name_hash = cpu_to_le32(name_hash); loc->xl_entry->xe_name_offset = cpu_to_le16(loc->xl_size); and line 2164: ocfs2_xa_add_namevalue(loc, xi); loc->xl_entry->xe_value_size = cpu_to_le64(xi->xi_value_len); loc->xl_entry->xe_name_len = xi->xi_name_len; Thus, possible null-pointer dereferences may occur. To fix these bugs, if loc-xl_entry is NULL, ocfs2_xa_prepare_entry() abnormally returns with -EINVAL. These bugs are found by a static analysis tool STCheck written by us. [akpm@linux-foundation.org: remove now-unused ocfs2_xa_add_entry()] Link: http://lkml.kernel.org/r/20190726101447.9153-1-baijiaju1990@gmail.comSigned-off-by: -
Jia Guo authored
Unused portion of a part-written fs-block-sized block is not set to zero in unaligned append direct write.This can lead to serious data inconsistencies. Ocfs2 manage disk with cluster size(for example, 1M), part-written in one cluster will change the cluster state from UN-WRITTEN to WRITTEN, VFS(function dio_zero_block) doesn't do the cleaning because bh's state is not set to NEW in function ocfs2_dio_wr_get_block when we write a WRITTEN cluster. For example, the cluster size is 1M, file size is 8k and we direct write from 14k to 15k, then 12k~14k and 15k~16k will contain dirty data. We have to deal with two cases: 1.The starting position of direct write is outside the file. 2.The starting position of direct write is located in the file. We need set bh's state to NEW in the first case. In the second case, we need mapped twice because bh's state of area out file should be set to NEW while area in file not. [akpm@linux-foundation.org: coding style fixes] Link: http://lkml.kernel.org/r/5292e287-8f1a-fd4a-1a14-661e555e0bed@huawei.comSigned-off-by:
Jia Guo <guojia12@huawei.com> Reviewed-by:
Yiwen Jiang <jiangyiwen@huawei.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Signed-off-by:
-
- 04 Oct, 2019 14 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds authored
Pull MIPS fixes from Paul Burton: - Build fixes for Cavium Octeon & PMC-Sierra MSP systems, as well as all pre-MIPSr6 configurations built with binutils < 2.25. - Boot fixes for 64-bit Loongson systems & SGI IP28 systems. - Wire up the new clone3 syscall. - Clean ups for a few build-time warnings. * tag 'mips_fixes_5.4_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: fw/arc: Remove unused addr variable MIPS: pmcs-msp71xx: Remove unused addr variable MIPS: pmcs-msp71xx: Add missing MAX_PROM_MEM definition mips: Loongson: Fix the link time qualifier of 'serial_exit()' MIPS: init: Prevent adding memory before PHYS_OFFSET MIPS: init: Fix reservation of memory between PHYS_OFFSET and mem start MIPS: VDSO: Fix build for binutils < 2.25 MIPS: VDSO: Remove unused gettimeofday.c MIPS: Wire up clone3 syscall MIPS: octeon: Include required header; fix octeon ethernet build MIPS: cpu-bugs64: Mark inline functions as __always_inline MIPS: dts: ar9331: fix interrupt-controller size MIPS: Loongson64: Fix boot failure after dropping boot_mem_map
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fixes from Paul Walmsley: - Ensure that exclusive-load reservations are terminated after system call or exception handling. This primarily affects QEMU, which does not expire load reservations. - Fix an issue primarily affecting RV32 platforms that can cause the DT header to be corrupted, causing boot failures. * tag 'riscv/for-v5.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Fix memblock reservation for device tree blob RISC-V: Clear load reservations while restoring hart contexts
-
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds authored
Pull DeviceTree fixes from Rob Herring: "Fix several 'dt_binding_check' build failures" * tag 'devicetree-fixes-for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: phy: lantiq: Fix Property Name dt-bindings: iio: ad7192: Fix DTC warning in the example dt-bindings: iio: ad7192: Fix Regulator Properties dt-bindings: media: rc: Fix redundant string dt-bindings: dsp: Fix fsl,dsp example
-
Paul Burton authored
The addr variable in prom_free_prom_memory() has been unused since commit 0df10076 ("MIPS: fw: Record prom memory"), leading to a compiler warning: arch/mips/fw/arc/memory.c:163:16: warning: unused variable 'addr' [-Wunused-variable] Fix this by removing the unused variable. Signed-off-by:
Paul Burton <paul.burton@mips.com> Fixes: 0df10076 ("MIPS: fw: Record prom memory") Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: linux-mips@vger.kernel.org
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fixes from Paolo Bonzini: "ARM and x86 bugfixes of all kinds. The most visible one is that migrating a nested hypervisor has always been busted on Broadwell and newer processors, and that has finally been fixed" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (22 commits) KVM: x86: omit "impossible" pmu MSRs from MSR list KVM: nVMX: Fix consistency check on injected exception error code KVM: x86: omit absent pmu MSRs from MSR list selftests: kvm: Fix libkvm build error kvm: vmx: Limit guest PMCs to those supported on the host kvm: x86, powerpc: do not allow clearing largepages debugfs entry KVM: selftests: x86: clarify what is reported on KVM_GET_MSRS failure KVM: VMX: Set VMENTER_L1D_FLUSH_NOT_REQUIRED if !X86_BUG_L1TF selftests: kvm: add test for dirty logging inside nested guests KVM: x86: fix nested guest live migration with PML KVM: x86: assign two bits to track SPTE kinds KVM: x86: Expose XSAVEERPTR to the guest kvm: x86: Enumerate support for CLZERO instruction kvm: x86: Use AMD CPUID semantics for AMD vCPUs kvm: x86: Improve emulation of CPUID leaves 0BH and 1FH KVM: X86: Fix userspace set invalid CR4 kvm: x86: Fix a spurious -E2BIG in __do_cpuid_func KVM: LAPIC: Loosen filter for adaptive tuning of lapic_timer_advance_ns KVM: arm/arm64: vgic: Use the appropriate TRACE_INCLUDE_PATH arm64: KVM: Kill hyp_alternate_select() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen fixes and cleanups from Juergen Gross: - a fix in the Xen balloon driver avoiding hitting a BUG_ON() in some cases, plus a follow-on cleanup series for that driver - a patch for introducing non-blocking EFI callbacks in Xen's EFI driver, plu a cleanup patch for Xen EFI handling merging the x86 and ARM arch specific initialization into the Xen EFI driver - a fix of the Xen xenbus driver avoiding a self-deadlock when cleaning up after a user process has died - a fix for Xen on ARM after removal of ZONE_DMA - a cleanup patch for avoiding build warnings for Xen on ARM * tag 'for-linus-5.4-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/xenbus: fix self-deadlock after killing user process xen/efi: have a common runtime setup function arm: xen: mm: use __GPF_DMA32 for arm64 xen/balloon: Clear PG_offline in balloon_retrieve() xen/balloon: Mark pages PG_offline in balloon_append() xen/balloon: Drop __balloon_append() xen/balloon: Set pages PageOffline() in balloon_add_region() ARM: xen: unexport HYPERVISOR_platform_op function xen/efi: Set nonblocking callbacks
-
Linus Torvalds authored
Merge tag 'copy-struct-from-user-v5.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull copy_struct_from_user() helper from Christian Brauner: "This contains the copy_struct_from_user() helper which got split out from the openat2() patchset. It is a generic interface designed to copy a struct from userspace. The helper will be especially useful for structs versioned by size of which we have quite a few. This allows for backwards compatibility, i.e. an extended struct can be passed to an older kernel, or a legacy struct can be passed to a newer kernel. For the first case (extended struct, older kernel) the new fields in an extended struct can be set to zero and the struct safely passed to an older kernel. The most obvious benefit is that this helper lets us get rid of duplicate code present in at least sched_setattr(), perf_event_open(), and clone3(). More importantly it will also help to ensure that users implementing versioning-by-size end up with the same core semantics. This point is especially crucial since we have at least one case where versioning-by-size is used but with slighly different semantics: sched_setattr(), perf_event_open(), and clone3() all do do similar checks to copy_struct_from_user() while rt_sigprocmask(2) always rejects differently-sized struct arguments. With this pull request we also switch over sched_setattr(), perf_event_open(), and clone3() to use the new helper" * tag 'copy-struct-from-user-v5.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: usercopy: Add parentheses around assignment in test_copy_struct_from_user perf_event_open: switch to copy_struct_from_user() sched_setattr: switch to copy_struct_from_user() clone3: switch to copy_struct_from_user() lib: introduce copy_struct_from_user() helper
-
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linuxLinus Torvalds authored
Pull clone3/pidfd fixes from Christian Brauner: "This contains a couple of fixes: - Fix pidfd selftest compilation (Shuah Kahn) Due to a false linking instruction in the Makefile compilation for the pidfd selftests would fail on some systems. - Fix compilation for glibc on RISC-V systems (Seth Forshee) In some scenarios linux/uapi/linux/sched.h is included where __ASSEMBLY__ is defined causing a build failure because struct clone_args was not guarded by an #ifndef __ASSEMBLY__. - Add missing clone3() and struct clone_args kernel-doc (Christian Brauner) clone3() and struct clone_args were missing kernel-docs. (The goal is to use kernel-doc for any function or type where it's worth it.) For struct clone_args this also contains a comment about the fact that it's versioned by size" * tag 'for-linus-20191003' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: sched: add kernel-doc for struct clone_args fork: add kernel-doc for clone3 selftests: pidfd: Fix undefined reference to pthread_create() sched: Add __ASSEMBLY__ guards around struct clone_args -
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Been offline for 3 days, got back and had some fixes queued up. Nothing too major, the i915 dp-mst fix is important, and amdgpu has a bulk move speedup fix and some regressions, but nothing too insane for an rc2 pull. The intel fixes are also 2 weeks worth, they missed the boat last week. core: - writeback fixes i915: - Fix DP-MST crtc_mask - Fix dsc dpp calculations - Fix g4x sprite scaling stride check with GTT remapping - Fix concurrence on cases where requests where getting retired at same time as resubmitted to HW - Fix gen9 display resolutions by setting the right max plane width - Fix GPU hang on preemption - Mark contents as dirty on a write fault. This was breaking cursor sprite with dumb buffers. komeda: - memory leak fix tilcdc: - include fix amdgpu: - Enable bulk moves - Power metrics fixes for Navi - Fix S4 regression - Add query for tcc disabled mask - Fix several leaks in error paths - randconfig fixes - clang fixes" * tag 'drm-fixes-2019-10-04' of git://anongit.freedesktop.org/drm/drm: (21 commits) Revert "drm/i915: Fix DP-MST crtc_mask" drm/omap: fix max fclk divider for omap36xx drm/i915: Fix g4x sprite scaling stride check with GTT remapping drm/i915/dp: Fix dsc bpp calculations, v5. drm/amd/display: fix dcn21 Makefile for clang drm/amd/display: hide an unused variable drm/amdgpu: display_mode_vba_21: remove uint typedef drm/amdgpu: hide another #warning drm/amdgpu: make pmu support optional, again drm/amd/display: memory leak drm/amdgpu: fix multiple memory leaks in acp_hw_init drm/amdgpu: return tcc_disabled_mask to userspace drm/amdgpu: don't increment vram lost if we are in hibernation Revert "drm/amdgpu: disable stutter mode for renoir" drm/amd/powerplay: add sensor lock support for smu drm/amd/powerplay: change metrics update period from 1ms to 100ms drm/amdgpu: revert "disable bulk moves for now" drm/tilcdc: include linux/pinctrl/consumer.h again drm/komeda: prevent memory leak in komeda_wb_connector_add drm: Clear the fence pointer when writeback job signaled ... -
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: - Mandate timespec64 for the io_uring timeout ABI (Arnd) - Set of NVMe changes via Sagi: - controller removal race fix from Balbir - quirk additions from Gabriel and Jian-Hong - nvme-pci power state save fix from Mario - Add 64bit user commands (for 64bit registers) from Marta - nvme-rdma/nvme-tcp fixes from Max, Mark and Me - Minor cleanups and nits from James, Dan and John - Two s390 dasd fixes (Jan, Stefan) - Have loop change block size in DIO mode (Martijn) - paride pg header ifdef guard (Masahiro) - Two blk-mq queue scheduler tweaks, fixing an ordering issue on zoned devices and suboptimal performance on others (Ming) * tag 'for-linus-2019-10-03' of git://git.kernel.dk/linux-block: (22 commits) block: sed-opal: fix sparse warning: convert __be64 data block: sed-opal: fix sparse warning: obsolete array init. block: pg: add header include guard Revert "s390/dasd: Add discard support for ESE volumes" s390/dasd: Fix error handling during online processing io_uring: use __kernel_timespec in timeout ABI loop: change queue block size to match when using DIO blk-mq: apply normal plugging for HDD blk-mq: honor IO scheduler for multiqueue devices nvme-rdma: fix possible use-after-free in connect timeout nvme: Move ctrl sqsize to generic space nvme: Add ctrl attributes for queue_count and sqsize nvme: allow 64-bit results in passthru commands nvme: Add quirk for Kingston NVME SSD running FW E8FK11.T nvmet-tcp: remove superflous check on request sgl Added QUIRKs for ADATA XPG SX8200 Pro 512GB nvme-rdma: Fix max_hw_sectors calculation nvme: fix an error code in nvme_init_subsystem() nvme-pci: Save PCI state before putting drive into deepest state nvme-tcp: fix wrong stop condition in io_work ... -
Paolo Bonzini authored
INTEL_PMC_MAX_GENERIC is currently 32, which exceeds the 18 contiguous MSR indices reserved by Intel for event selectors. Since some machines actually have MSRs past the reserved range, filtering them against x86_pmu.num_counters_gp may have false positives. Cut the list to 18 entries to avoid this. Reported-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Suggested-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Dave Airlie authored
Merge tag 'drm-intel-fixes-2019-10-03-1' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Fix DP-MST crtc_mask - Fix dsc dpp calculations - Fix g4x sprite scaling stride check with GTT remapping Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191003193051.GA26421@intel.com
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
- One include fix for tilcdc - A clock fix for OMAP - A memory leak fix for Komeda - Some fixes for resources cleanups with writeback Signed-off-by:
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
drm-fixes-5.4-2019-10-02: amdgpu: - Enable bulk moves - Power metrics fixes for Navi - Fix S4 regression - Add query for tcc disabled mask - Fix several leaks in error paths - randconfig fixes - clang fixes Signed-off-by:
-
- 03 Oct, 2019 9 commits
-
-
Paul Burton authored
The addr variable in prom_free_prom_memory() has been unused since commit b3c948e2 ("MIPS: msp: Record prom memory"), causing a warning & build failure due to -Werror. Remove the unused variable. Signed-off-by:
-
Paul Burton authored
Commit b3c948e2 ("MIPS: msp: Record prom memory") introduced use of a MAX_PROM_MEM value but didn't define it. A bounds check in prom_meminit() suggests its value was supposed to be 5, so define it as such & adjust the bounds check to use the macro rather than a magic number. Signed-off-by:
-
Eric Sandeen authored
Today, put_compat_statfs64() disallows nearly any field value over 2^32 if f_bsize is only 32 bits, but that makes no sense. compat_statfs64 is there for the explicit purpose of providing 64-bit fields for f_files, f_ffree, etc. And f_bsize is always only 32 bits. As a result, 32-bit userspace gets -EOVERFLOW for i.e. large file counts even with -D_FILE_OFFSET_BITS=64 set. In reality, only f_bsize and f_frsize can legitimately overflow (fields like f_type and f_namelen should never be large), so test only those fields. This bug was discussed at length some time ago, and this is the proposal Al suggested at https://lkml.org/lkml/2018/8/6/640. It seemed to get dropped amid the discussion of other related changes, but this part seems obviously correct on its own, so I've picked it up and sent it, for expediency. Fixes: 64d2ab32 ("vfs: fix put_compat_statfs64() does not handle errors") Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Signed-off-by:
-
Randy Dunlap authored
sparse warns about incorrect type when using __be64 data. It is not being converted to CPU-endian but it should be. Fixes these sparse warnings: ../block/sed-opal.c:375:20: warning: incorrect type in assignment (different base types) ../block/sed-opal.c:375:20: expected unsigned long long [usertype] align ../block/sed-opal.c:375:20: got restricted __be64 const [usertype] alignment_granularity ../block/sed-opal.c:376:25: warning: incorrect type in assignment (different base types) ../block/sed-opal.c:376:25: expected unsigned long long [usertype] lowest_lba ../block/sed-opal.c:376:25: got restricted __be64 const [usertype] lowest_aligned_lba Fixes: 455a7b23 ("block: Add Sed-opal library") Cc: Scott Bauer <scott.bauer@intel.com> Cc: Rafael Antognolli <rafael.antognolli@intel.com> Cc: linux-block@vger.kernel.org Reviewed-by:
Jon Derrick <jonathan.derrick@intel.com> Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Randy Dunlap authored
Fix sparse warning: (missing '=') ../block/sed-opal.c:133:17: warning: obsolete array initializer, use C99 syntax Fixes: ff91064e ("block: sed-opal: check size of shadow mbr") Cc: linux-block@vger.kernel.org Cc: Jonas Rabenstein <jonas.rabenstein@studium.uni-erlangen.de> Cc: David Kozub <zub@linux.fjfi.cvut.cz> Reviewed-by:
Scott Bauer <sbauer@plzdonthack.me> Reviewed-by:
Revanth Rajashekar <revanth.rajashekar@intel.com> Signed-off-by:
-
Ville Syrjälä authored
This reverts commit 4eaceea3. Several userspace clients (modesetting ddx and mutter+wayland at least) handle encoder.possible_crtcs incorrectly. What they essentially do is the following: possible_crtcs = ~0; for_each_possible_encoder(connector) possible_crtcs &= encoder->possible_crtcs; Ie. they calculate the intersection of the possible_crtcs for the connector when they really should be calculating the union instead. In our case each MST encoder now has just one unique bit set, and so the intersection is always zero. The end result is that MST connectors can't be lit up because no crtc can be found to drive them. I've submitted a fix for the modesetting ddx [1], and complained on #wayland about mutter, so hopefully the situation will improve in the future. In the meantime we have regression, and so must go back to the old way of misconfiguring possible_crtcs in the kernel. [1] https://gitlab.freedesktop.org/xorg/xserver/merge_requests/277 Cc: Jonas Ådahl <jadahl@gmail.com> Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111507Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190903154018.26357-1-ville.syrjala@linux.intel.comReviewed-by:
José Roberto de Souza <jose.souza@intel.com> (cherry picked from commit e838bfa8) Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com>
-
Christian Brauner authored
Add kernel-doc for struct clone_args for the clone3() syscall. Link: https://lore.kernel.org/r/20191001114701.24661-3-christian.brauner@ubuntu.comSigned-off-by:
Christian Brauner <christian.brauner@ubuntu.com>
-
Christian Brauner authored
Add kernel-doc for the clone3() syscall. Link: https://lore.kernel.org/r/20191001114701.24661-2-christian.brauner@ubuntu.comSigned-off-by:
-
Nathan Chancellor authored
Clang warns: lib/test_user_copy.c:96:10: warning: using the result of an assignment as a condition without parentheses [-Wparentheses] if (ret |= test(umem_src == NULL, "kmalloc failed")) ~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ lib/test_user_copy.c:96:10: note: place parentheses around the assignment to silence this warning if (ret |= test(umem_src == NULL, "kmalloc failed")) ^ ( ) lib/test_user_copy.c:96:10: note: use '!=' to turn this compound assignment into an inequality comparison if (ret |= test(umem_src == NULL, "kmalloc failed")) ^~ != Add the parentheses as it suggests because this is intentional. Fixes: f5a1a536 ("lib: introduce copy_struct_from_user() helper") Link: https://github.com/ClangBuiltLinux/linux/issues/731Signed-off-by:Nathan Chancellor <natechancellor@gmail.com> Acked-by:
Aleksa Sarai <cyphar@cyphar.com> Acked-by:
-
