Skip to content

L
linux
Switch branch/tag
  1. 21 Jan, 2021 4 commits
    • Linus Torvalds's avatar
      Merge tag 'acpi-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm · 6a52f4cf
      Linus Torvalds authored 
      Pull ACPI fix from Rafael Wysocki:
 "Modify a helper function in the ACPI core to match the behavior
  expected by its users so as to prevent NULL pointer dereferences and
  occasional memory corruption from occurring (Hans de Goede)"

* tag 'acpi-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: scan: Make acpi_bus_get_device() clear return pointer on error
      6a52f4cf
    • Linus Torvalds's avatar
      Merge tag 'sound-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound · 120fbdb8
      Linus Torvalds authored 
      Pull sound fixes from Takashi Iwai:
 "Here is a collection of sound fixes targeted for 5.11-rc5. Most
  notably, USB-audio still got a few intensive changes for covering the
  regressions while the rest are all small fixes.

   - A trivial fix for sequencer OSS emulation error path

   - HD-audio runtime PM regression fix, a few quirks and new IDs

   - USB-audio regression fixes for Pioneer device, Logitech webcams,
     etc

   - ASoC SOF Intel coverage

   - MAINTAINERS file update

   - A fix in the jack handling in ASoC HDMI codec"

* tag 'sound-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: usb-audio: Fix hw constraints dependencies
  ALSA: hda: Balance runtime/system PM if direct-complete is disabled
  ALSA: usb-audio: Avoid implicit feedback on Pioneer devices
  ALSA: usb-audio: Set sample rate for all sharing EPs on UAC1
  ALSA: usb-audio: Fix UAC1 rate setup for secondary endpoints
  MAINTAINERS: update qcom ASoC drivers list
  MAINTAINERS: update maintainers of qcom audio
  ALSA: hda: Add Cometlake-R PCI ID
  ALSA: seq: oss: Fix missing error check in snd_seq_oss_synth_make_info()
  ALSA: hda/via: Add minimum mute flag
  ALSA: hda/realtek - Limit int mic boost on Acer Aspire E5-575T
  ALSA: usb-audio: Always apply the hw constraints for implicit fb sync
  ASoC: SOF: Intel: fix page fault at probe if i915 init fails
  ALSA: hda: Add AlderLake-P PCI ID and HDMI codec vid
  ASoC: SOF: Intel: hda: Avoid checking jack on system suspend
  ASoC: SOF: Intel: hda: Modify existing helper to disable WAKEEN
  ASoC: SOF: Intel: hda: Resume codec to do jack detection
  MAINTAINERS: update references to stm32 audio bindings
  ASoC: hdmi-codec: Fix return value in hdmi_codec_set_jack()
      120fbdb8
    • Linus Torvalds's avatar
      Merge tag 'gpio-fixes-for-v5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux · d7631e43
      Linus Torvalds authored 
      Pull gpio fixes from Bartosz Golaszewski:

 - rework the character device code to avoid a frame size warning

 - fix printk format issues in gpio-tools

 - warn on redefinition of the to_irq callback in core gpiolib code

 - fix PWM period calculation in gpio-mvebu

 - make gpio-sifive Kconfig entry consistent with other drivers

 - fix a build issue in gpio-tegra

* tag 'gpio-fixes-for-v5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: tegra: Add missing dependencies
  gpio: sifive: select IRQ_DOMAIN_HIERARCHY rather than depend on it
  gpio: mvebu: fix pwm .get_state period calculation
  gpiolib: add a warning on gpiochip->to_irq defined
  tools: gpio: fix %llu warning in gpio-watch.c
  tools: gpio: fix %llu warning in gpio-event-mon.c
  gpiolib: cdev: fix frame size warning in gpio_ioctl()
      d7631e43
    • Linus Torvalds's avatar
      Merge tag 'pinctrl-v5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl · 63858ac3
      Linus Torvalds authored 
      Pull pin control fixes from Linus Walleij:
 "These are all driver fixes, the Qualcomm stuff is the most widely used
  and important:

   - The main matter is a complicated fixup for the Qualcomm deep sleep
     states.

     This manifests in how interrupts get handled or in some cases not
     handled in cooperation with the PDC (Power Domain Controller). It's
     one of these really hardcore bug fixes that signifies high maturity
     of the platform.

   - Fix a register layout problem in the JZ4760 driver

   - Fix a register offset in the Aspeed G6 driver

   - Fix a compiler warning in the Nomadik driver

   - Fix a fallback code path in the mediatek driver"

* tag 'pinctrl-v5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: qcom: Don't clear pending interrupts when enabling
  pinctrl: qcom: Properly clear "intr_ack_high" interrupts when unmasking
  pinctrl: qcom: No need to read-modify-write the interrupt status
  pinctrl: qcom: Allow SoCs to specify a GPIO function that's not 0
  pinctrl: mediatek: Fix fallback call path
  pinctrl: nomadik: Remove unused variable in nmk_gpio_dbg_show_one
  pinctrl: aspeed: g6: Fix PWMG0 pinctrl setting
  pinctrl: ingenic: Rename registers from JZ4760_GPIO_* to JZ4770_GPIO_*
  pinctrl: ingenic: Fix JZ4760 support
      63858ac3
  3. 20 Jan, 2021 23 commits
  5. 19 Jan, 2021 13 commits
    • Tariq Toukan's avatar
      net: Disable NETIF_F_HW_TLS_RX when RXCSUM is disabled · a3eb4e9d
      Tariq Toukan authored 
      With NETIF_F_HW_TLS_RX packets are decrypted in HW. This cannot be
logically done when RXCSUM offload is off.

Fixes: 14136564 ("net: Add TLS RX offload feature")
Signed-off-by: default avatarTariq Toukan <tariqt@nvidia.com>
Reviewed-by: default avatarBoris Pismenny <borisp@nvidia.com>
Link: https://lore.kernel.org/r/20210117151538.9411-1-tariqt@nvidia.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      a3eb4e9d
    • Jakub Kicinski's avatar
      Merge branch 'ipv4-ensure-ecn-bits-don-t-influence-source-address-validation' · 2565ff4e
      Jakub Kicinski authored 
      Guillaume Nault says:

====================
ipv4: Ensure ECN bits don't influence source address validation

Functions that end up calling fib_table_lookup() should clear the ECN
bits from the TOS, otherwise ECT(0) and ECT(1) packets can be treated
differently.

Most functions already clear the ECN bits, but there are a few cases
where this is not done. This series only fixes the ones related to
source address validation.
====================

Link: https://lore.kernel.org/r/cover.1610790904.git.gnault@redhat.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      2565ff4e
    • Guillaume Nault's avatar
      netfilter: rpfilter: mask ecn bits before fib lookup · 2e5a6266
      Guillaume Nault authored 
      RT_TOS() only masks one of the two ECN bits. Therefore rpfilter_mt()
treats Not-ECT or ECT(1) packets in a different way than those with
ECT(0) or CE.

Reproducer:

  Create two netns, connected with a veth:
  $ ip netns add ns0
  $ ip netns add ns1
  $ ip link add name veth01 netns ns0 type veth peer name veth10 netns ns1
  $ ip -netns ns0 link set dev veth01 up
  $ ip -netns ns1 link set dev veth10 up
  $ ip -netns ns0 address add 192.0.2.10/32 dev veth01
  $ ip -netns ns1 address add 192.0.2.11/32 dev veth10

  Add a route to ns1 in ns0:
  $ ip -netns ns0 route add 192.0.2.11/32 dev veth01

  In ns1, only packets with TOS 4 can be routed to ns0:
  $ ip -netns ns1 route add 192.0.2.10/32 tos 4 dev veth10

  Ping from ns0 to ns1 works regardless of the ECN bits, as long as TOS
  is 4:
  $ ip netns exec ns0 ping -Q 4 192.0.2.11   # TOS 4, Not-ECT
    ... 0% packet loss ...
  $ ip netns exec ns0 ping -Q 5 192.0.2.11   # TOS 4, ECT(1)
    ... 0% packet loss ...
  $ ip netns exec ns0 ping -Q 6 192.0.2.11   # TOS 4, ECT(0)
    ... 0% packet loss ...
  $ ip netns exec ns0 ping -Q 7 192.0.2.11   # TOS 4, CE
    ... 0% packet loss ...

  Now use iptable's rpfilter module in ns1:
  $ ip netns exec ns1 iptables-legacy -t raw -A PREROUTING -m rpfilter --invert -j DROP

  Not-ECT and ECT(1) packets still pass:
  $ ip netns exec ns0 ping -Q 4 192.0.2.11   # TOS 4, Not-ECT
    ... 0% packet loss ...
  $ ip netns exec ns0 ping -Q 5 192.0.2.11   # TOS 4, ECT(1)
    ... 0% packet loss ...

  But ECT(0) and ECN packets are dropped:
  $ ip netns exec ns0 ping -Q 6 192.0.2.11   # TOS 4, ECT(0)
    ... 100% packet loss ...
  $ ip netns exec ns0 ping -Q 7 192.0.2.11   # TOS 4, CE
    ... 100% packet loss ...

After this patch, rpfilter doesn't drop ECT(0) and CE packets anymore.

Fixes: 8f97339d ("netfilter: add ipv4 reverse path filter match")
Signed-off-by: default avatarGuillaume Nault <gnault@redhat.com>
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      2e5a6266
    • Guillaume Nault's avatar
      udp: mask TOS bits in udp_v4_early_demux() · 8d2b51b0
      Guillaume Nault authored 
      udp_v4_early_demux() is the only function that calls
ip_mc_validate_source() with a TOS that hasn't been masked with
IPTOS_RT_MASK.

This results in different behaviours for incoming multicast UDPv4
packets, depending on if ip_mc_validate_source() is called from the
early-demux path (udp_v4_early_demux) or from the regular input path
(ip_route_input_noref).

ECN would normally not be used with UDP multicast packets, so the
practical consequences should be limited on that side. However,
IPTOS_RT_MASK is used to also masks the TOS' high order bits, to align
with the non-early-demux path behaviour.

Reproducer:

  Setup two netns, connected with veth:
  $ ip netns add ns0
  $ ip netns add ns1
  $ ip -netns ns0 link set dev lo up
  $ ip -netns ns1 link set dev lo up
  $ ip link add name veth01 netns ns0 type veth peer name veth10 netns ns1
  $ ip -netns ns0 link set dev veth01 up
  $ ip -netns ns1 link set dev veth10 up
  $ ip -netns ns0 address add 192.0.2.10 peer 192.0.2.11/32 dev veth01
  $ ip -netns ns1 address add 192.0.2.11 peer 192.0.2.10/32 dev veth10

  In ns0, add route to multicast address 224.0.2.0/24 using source
  address 198.51.100.10:
  $ ip -netns ns0 address add 198.51.100.10/32 dev lo
  $ ip -netns ns0 route add 224.0.2.0/24 dev veth01 src 198.51.100.10

  In ns1, define route to 198.51.100.10, only for packets with TOS 4:
  $ ip -netns ns1 route add 198.51.100.10/32 tos 4 dev veth10

  Also activate rp_filter in ns1, so that incoming packets not matching
  the above route get dropped:
  $ ip netns exec ns1 sysctl -wq net.ipv4.conf.veth10.rp_filter=1

  Now try to receive packets on 224.0.2.11:
  $ ip netns exec ns1 socat UDP-RECVFROM:1111,ip-add-membership=224.0.2.11:veth10,ignoreeof -

  In ns0, send packet to 224.0.2.11 with TOS 4 and ECT(0) (that is,
  tos 6 for socat):
  $ echo test0 | ip netns exec ns0 socat - UDP-DATAGRAM:224.0.2.11:1111,bind=:1111,tos=6

  The "test0" message is properly received by socat in ns1, because
  early-demux has no cached dst to use, so source address validation
  is done by ip_route_input_mc(), which receives a TOS that has the
  ECN bits masked.

  Now send another packet to 224.0.2.11, still with TOS 4 and ECT(0):
  $ echo test1 | ip netns exec ns0 socat - UDP-DATAGRAM:224.0.2.11:1111,bind=:1111,tos=6

  The "test1" message isn't received by socat in ns1, because, now,
  early-demux has a cached dst to use and calls ip_mc_validate_source()
  immediately, without masking the ECN bits.

Fixes: bc044e8d ("udp: perform source validation for mcast early demux")
Signed-off-by: default avatarGuillaume Nault <gnault@redhat.com>
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      8d2b51b0
    • Maxim Mikityanskiy's avatar
      xsk: Clear pool even for inactive queues · b425e24a
      Maxim Mikityanskiy authored 
      The number of queues can change by other means, rather than ethtool. For
example, attaching an mqprio qdisc with num_tc > 1 leads to creating
multiple sets of TX queues, which may be then destroyed when mqprio is
deleted. If an AF_XDP socket is created while mqprio is active,
dev->_tx[queue_id].pool will be filled, but then real_num_tx_queues may
decrease with deletion of mqprio, which will mean that the pool won't be
NULLed, and a further increase of the number of TX queues may expose a
dangling pointer.

To avoid any potential misbehavior, this commit clears pool for RX and
TX queues, regardless of real_num_*_queues, still taking into
consideration num_*_queues to avoid overflows.

Fixes: 1c1efc2a ("xsk: Create and free buffer pool independently from umem")
Fixes: a41b4f3c ("xsk: simplify xdp_clear_umem_at_qid implementation")
Signed-off-by: default avatarMaxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Acked-by: default avatarBjörn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/20210118160333.333439-1-maximmi@mellanox.com
      b425e24a
    • Linus Torvalds's avatar
      Merge tag 'task_work-2021-01-19' of git://git.kernel.dk/linux-block · 45dfb8a5
      Linus Torvalds authored 
      Pull task_work fix from Jens Axboe:
 "The TIF_NOTIFY_SIGNAL change inadvertently removed the unconditional
  task_work run we had in get_signal().

  This caused a regression for some setups, since we're relying on eg
  ____fput() being run to close and release, for example, a pipe and
  wake the other end.

  For 5.11, I prefer the simple solution of just reinstating the
  unconditional run, even if it conceptually doesn't make much sense -
  if you need that kind of guarantee, you should be using TWA_SIGNAL
  instead of TWA_NOTIFY. But it's the trivial fix for 5.11, and would
  ensure that other potential gotchas/assumptions for task_work don't
  regress for 5.11.

  We're looking into further simplifying the task_work notifications for
  5.12 which would resolve that too"

* tag 'task_work-2021-01-19' of git://git.kernel.dk/linux-block:
  task_work: unconditionally run task_work from get_signal()
      45dfb8a5
    • Mircea Cirjaliu's avatar
      bpf: Fix helper bpf_map_peek_elem_proto pointing to wrong callback · 301a33d5
      Mircea Cirjaliu authored 
      I assume this was obtained by copy/paste. Point it to bpf_map_peek_elem()
instead of bpf_map_pop_elem(). In practice it may have been less likely
hit when under JIT given shielded via 84430d42 ("bpf, verifier: avoid
retpoline for map push/pop/peek operation").

Fixes: f1a2e44a ("bpf: add queue and stack maps")
Signed-off-by: default avatarMircea Cirjaliu <mcirjaliu@bitdefender.com>
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Cc: Mauricio Vasquez <mauriciovasquezbernal@gmail.com>
Link: https://lore.kernel.org/bpf/AM7PR02MB6082663DFDCCE8DA7A6DD6B1BBA30@AM7PR02MB6082.eurprd02.prod.outlook.com
      301a33d5
    • Linus Torvalds's avatar
      Merge tag 'nfsd-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux · f419f031
      Linus Torvalds authored 
      Pull nfsd fixes from Chuck Lever:

 - Avoid exposing parent of root directory in NFSv3 READDIRPLUS results

 - Fix a tracepoint change that went in the initial 5.11 merge

* tag 'nfsd-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  SUNRPC: Move the svc_xdr_recvfrom tracepoint again
  nfsd4: readdirplus shouldn't return parent of export
      f419f031
    • Linus Torvalds's avatar
      Merge tag 'hyperv-fixes-signed-20210119' of... · 28df8580
      Linus Torvalds authored 
      Merge tag 'hyperv-fixes-signed-20210119' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux

Pull hyperv fix from Wei Liu:
 "One patch from Dexuan to fix clockevent initialization"

* tag 'hyperv-fixes-signed-20210119' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
  x86/hyperv: Initialize clockevents after LAPIC is initialized
      28df8580
    • Jakub Kicinski's avatar
      Merge branch 'sh_eth-fix-reboot-crash' · f7b9820d
      Jakub Kicinski authored 
      Geert Uytterhoeven says:

====================
sh_eth: Fix reboot crash

This patch fixes a regression v5.11-rc1, where rebooting while a sh_eth
device is not opened will cause a crash.

Changes compared to v1:
  - Export mdiobb_{read,write}(),
  - Call mdiobb_{read,write}() now they are exported,
  - Use mii_bus.parent to avoid bb_info.dev copy,
  - Drop RFC state.

Alternatively, mdio-bitbang could provide Runtime PM-aware wrappers
itself, and use them either manually (through a new parameter to
alloc_mdio_bitbang(), or a new alloc_mdio_bitbang_*() function), or
automatically (e.g. if pm_runtime_enabled() returns true).  Note that
the latter requires a "struct device *" parameter to operate on.
Currently there are only two drivers that call alloc_mdio_bitbang() and
use Runtime PM: the Renesas sh_eth and ravb drivers.  This series fixes
the former, while the latter is not affected (it keeps the device
powered all the time between driver probe and driver unbind, and
changing that seems to be non-trivial).
====================

Link: https://lore.kernel.org/r/20210118150656.796584-1-geert+renesas@glider.beSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      f7b9820d
    • Geert Uytterhoeven's avatar
      sh_eth: Make PHY access aware of Runtime PM to fix reboot crash · 02cae02a
      Geert Uytterhoeven authored 
      Wolfram reports that his R-Car H2-based Lager board can no longer be
rebooted in v5.11-rc1, as it crashes with an imprecise external abort.
The issue can be reproduced on other boards (e.g. Koelsch with R-Car
M2-W) too, if CONFIG_IP_PNP is disabled, and the Ethernet interface is
down at reboot time:

    Unhandled fault: imprecise external abort (0x1406) at 0x00000000
    pgd = (ptrval)
    [00000000] *pgd=422b6835, *pte=00000000, *ppte=00000000
    Internal error: : 1406 [#1] ARM
    Modules linked in:
    CPU: 0 PID: 1105 Comm: init Tainted: G        W         5.10.0-rc1-00402-ge2f016cf #1048
    Hardware name: Generic R-Car Gen2 (Flattened Device Tree)
    PC is at sh_mdio_ctrl+0x44/0x60
    LR is at sh_mmd_ctrl+0x20/0x24
    ...
    Backtrace:
    [<c0451f30>] (sh_mdio_ctrl) from [<c0451fd4>] (sh_mmd_ctrl+0x20/0x24)
     r7:0000001f r6:00000020 r5:00000002 r4:c22a1dc4
    [<c0451fb4>] (sh_mmd_ctrl) from [<c044fc18>] (mdiobb_cmd+0x38/0xa8)
    [<c044fbe0>] (mdiobb_cmd) from [<c044feb8>] (mdiobb_read+0x58/0xdc)
     r9:c229f844 r8:c0c329dc r7:c221e000 r6:00000001 r5:c22a1dc4 r4:00000001
    [<c044fe60>] (mdiobb_read) from [<c044c854>] (__mdiobus_read+0x74/0xe0)
     r7:0000001f r6:00000001 r5:c221e000 r4:c221e000
    [<c044c7e0>] (__mdiobus_read) from [<c044c9d8>] (mdiobus_read+0x40/0x54)
     r7:0000001f r6:00000001 r5:c221e000 r4:c221e458
    [<c044c998>] (mdiobus_read) from [<c044d678>] (phy_read+0x1c/0x20)
     r7:ffffe000 r6:c221e470 r5:00000200 r4:c229f800
    [<c044d65c>] (phy_read) from [<c044d94c>] (kszphy_config_intr+0x44/0x80)
    [<c044d908>] (kszphy_config_intr) from [<c044694c>] (phy_disable_interrupts+0x44/0x50)
     r5:c229f800 r4:c229f800
    [<c0446908>] (phy_disable_interrupts) from [<c0449370>] (phy_shutdown+0x18/0x1c)
     r5:c229f800 r4:c229f804
    [<c0449358>] (phy_shutdown) from [<c040066c>] (device_shutdown+0x168/0x1f8)
    [<c0400504>] (device_shutdown) from [<c013de44>] (kernel_restart_prepare+0x3c/0x48)
     r9:c22d2000 r8:c0100264 r7:c0b0d034 r6:00000000 r5:4321fedc r4:00000000
    [<c013de08>] (kernel_restart_prepare) from [<c013dee0>] (kernel_restart+0x1c/0x60)
    [<c013dec4>] (kernel_restart) from [<c013e1d8>] (__do_sys_reboot+0x168/0x208)
     r5:4321fedc r4:01234567
    [<c013e070>] (__do_sys_reboot) from [<c013e2e8>] (sys_reboot+0x18/0x1c)
     r7:00000058 r6:00000000 r5:00000000 r4:00000000
    [<c013e2d0>] (sys_reboot) from [<c0100060>] (ret_fast_syscall+0x0/0x54)

As of commit e2f016cf ("net: phy: add a shutdown procedure"),
system reboot calls phy_disable_interrupts() during shutdown.  As this
happens unconditionally, the PHY registers may be accessed while the
device is suspended, causing undefined behavior, which may crash the
system.

Fix this by wrapping the PHY bitbang accessors in the sh_eth driver by
wrappers that take care of Runtime PM, to resume the device when needed.
Reported-by: default avatarWolfram Sang <wsa+renesas@sang-engineering.com>
Suggested-by: default avatarAndrew Lunn <andrew@lunn.ch>
Signed-off-by: default avatarGeert Uytterhoeven <geert+renesas@glider.be>
Tested-by: default avatarWolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      02cae02a
    • Geert Uytterhoeven's avatar
      mdio-bitbang: Export mdiobb_{read,write}() · 8eed01b5
      Geert Uytterhoeven authored 
      Export mdiobb_read() and mdiobb_write(), so Ethernet controller drivers
can call them from their MDIO read/write wrappers.
Signed-off-by: default avatarGeert Uytterhoeven <geert+renesas@glider.be>
Tested-by: default avatarWolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      8eed01b5
    • Oleksandr Mazur's avatar
      net: core: devlink: use right genl user_ptr when handling port param get/set · 7e238de8
      Oleksandr Mazur authored 
      Fix incorrect user_ptr dereferencing when handling port param get/set:

    idx [0] stores the 'struct devlink' pointer;
    idx [1] stores the 'struct devlink_port' pointer;

Fixes: 637989b5 ("devlink: Always use user_ptr[0] for devlink and simplify post_doit")
CC: Parav Pandit <parav@mellanox.com>
Signed-off-by: default avatarOleksandr Mazur <oleksandr.mazur@plvision.eu>
Signed-off-by: default avatarVadym Kochan <vadym.kochan@plvision.eu>
Link: https://lore.kernel.org/r/20210119085333.16833-1-vadym.kochan@plvision.euSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      7e238de8
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7