Skylake suffers from RSB underflow speculation issues; report this
vulnerability and it's mitigation (spectre_v2=ibrs).

  [jpoimboe: cleanups, eibrs]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>

retbleed will depend on spectre_v2, while spectre_v2_user depends on
retbleed. Break this cycle.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>

Extend spectre_v2= boot option with Kernel IBRS.

  [jpoimboe: no STIBP with IBRS]
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>

When changing SPEC_CTRL for user control, the WRMSR can be delayed
until return-to-user when KERNEL_IBRS has been enabled.

This avoids an MSR write during context switch.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>

Implement Kernel IBRS - currently the only known option to mitigate RSB
underflow speculation issues on Skylake hardware.

Note: since IBRS_ENTER requires fuller context established than
UNTRAIN_RET, it must be placed after it. However, since UNTRAIN_RET
itself implies a RET, it must come after IBRS_ENTER. This means
IBRS_ENTER needs to also move UNTRAIN_RET.

Note 2: KERNEL_IBRS is sub-optimal for XenPV.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>

Due to TIF_SSBD and TIF_SPEC_IB the actual IA32_SPEC_CTRL value can
differ from x86_spec_ctrl_base. As such, keep a per-CPU value
reflecting the current task's MSR content.

  [jpoimboe: rename]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>

For untrained return thunks to be fully effective, STIBP must be enabled
or SMT disabled.
Co-developed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>

Add the "retbleed=<value>" boot parameter to select a mitigation for
RETBleed. Possible values are "off", "auto" and "unret"
(JMP2RET mitigation). The default value is "auto".

Currently, "retbleed=auto" will select the unret mitigation on
AMD and Hygon and no mitigation on Intel (JMP2RET is not effective on
Intel).

  [peterz: rebase; add hygon]
  [jpoimboe: cleanups]
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>

Report that AMD x86 CPUs are vulnerable to the RETBleed (Arbitrary
Speculative Code Execution with Return Instructions) attack.

  [peterz: add hygon]
  [kim: invert parity; fam15h]
Co-developed-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>

Note: needs to be in a section distinct from Retpolines such that the
Retpoline RET substitution cannot possibly use immediate jumps.

ORC unwinding for zen_untrain_ret() and __x86_return_thunk() is a
little tricky but works due to the fact that zen_untrain_ret() doesn't
have any stack ops and as such will emit a single ORC entry at the
start (+0x3f).

Meanwhile, unwinding an IP, including the __x86_return_thunk() one
(+0x40) will search for the largest ORC entry smaller or equal to the
IP, these will find the one ORC entry (+0x3f) and all works.

  [ Alexandre: SVM part. ]
  [ bp: Build fix, massages. ]
Suggested-by: Andrew Cooper <Andrew.Cooper3@citrix.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>

Needed because zen_untrain_ret() will be called from noinstr code.

Also makes sense since the thunks MUST NOT contain instrumentation nor
be poked with dynamic instrumentation.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>

Commit

  ee774dac ("x86/entry: Move PUSH_AND_CLEAR_REGS out of error_entry()")

manages to introduce a CALL/RET pair that is before SWITCH_TO_KERNEL_CR3,
which means it is before RETBleed can be mitigated.

Revert to an earlier version of the commit in Fixes. Down side is that
this will bloat .text size somewhat. The alternative is fully reverting
it.

The purpose of this patch was to allow migrating error_entry() to C,
including the whole of kPTI. Much care needs to be taken moving that
forward to not re-introduce this problem of early RETs.

Fixes: ee774dac ("x86/entry: Move PUSH_AND_CLEAR_REGS out of error_entry()")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>

Use the return thunk in asm code. If the thunk isn't needed, it will
get patched into a RET instruction during boot by apply_returns().

Since alternatives can't handle relocations outside of the first
instruction, putting a 'jmp __x86_return_thunk' in one is not valid,
therefore carve out the memmove ERMS path into a separate label and jump
to it.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>

Specifically, it's because __enc_copy() encrypts the kernel after
being relocated outside the kernel in sme_encrypt_execute(), and the
RET macro's jmp offset isn't amended prior to execution.
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>

This is userspace code and doesn't play by the normal kernel rules.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>

Prepare the SETcc fastop stuff for when RET can be larger still.

The tricky bit here is that the expressions should not only be
constant C expressions, but also absolute GAS expressions. This means
no ?: and 'true' is ~0.

Also ensure em_setcc() has the same alignment as the actual FOP_SETCC()
ops, this ensures there cannot be an alignment hole between em_setcc()
and the first op.

Additionally, add a .skip directive to the FOP_SETCC() macro to fill
any remaining space with INT3 traps; however the primary purpose of
this directive is to generate AS warnings when the remaining space
goes negative. Which is a very good indication the alignment magic
went side-ways.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>

Use the return thunk in eBPF generated code, if needed.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>

Use the return thunk in ftrace trampolines, if needed.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>

In addition to teaching static_call about the new way to spell 'RET',
there is an added complication in that static_call() is allowed to
rewrite text before it is known which particular spelling is required.

In order to deal with this; have a static_call specific fixup in the
apply_return() 'alternative' patching routine that will rewrite the
static_call trampoline to match the definite sequence.

This in turn creates the problem of uniquely identifying static call
trampolines. Currently trampolines are 8 bytes, the first 5 being the
jmp.d32/ret sequence and the final 3 a byte sequence that spells out
'SCT'.

This sequence is used in __static_call_validate() to ensure it is
patching a trampoline and not a random other jmp.d32. That is,
false-positives shouldn't be plenty, but aren't a big concern.

OTOH the new __static_call_fixup() must not have false-positives, and
'SCT' decodes to the somewhat weird but semi plausible sequence:

  push %rbx
  rex.XB push %r12

Additionally, there are SLS concerns with immediate jumps. Combined it
seems like a good moment to change the signature to a single 3 byte
trap instruction that is unique to this usage and will not ever get
generated by accident.

As such, change the signature to: '0x0f, 0xb9, 0xcc', which decodes
to:

  ud1 %esp, %ecx
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>

Find all the return-thunk sites and record them in a .return_sites
section such that the kernel can undo this.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>

Introduce X86_FEATURE_RETHUNK for those afflicted with needing this.

  [ bp: Do only INT3 padding - simpler. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>

Utilize -mfunction-return=thunk-extern when available to have the
compiler replace RET instructions with direct JMPs to the symbol
__x86_return_thunk. This does not affect assembler (.S) sources, only C
sources.

-mfunction-return=thunk-extern has been available since gcc 7.3 and
clang 15.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>

Put the actual retpoline thunk as the original code so that it can
become more complicated. Specifically, it allows RET to be a JMP,
which can't be .altinstr_replacement since that doesn't do relocations
(except for the very first instruction).
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>

On it's own not much of a cleanup but it prepares for more/similar
code.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>

In order to extend the RETPOLINE features to 4, move them to word 11
where there is still room. This mostly keeps DISABLE_RETPOLINE
simple.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>

The recent mmio_stale_data fixes broke the noinstr constraints:

  vmlinux.o: warning: objtool: vmx_vcpu_enter_exit+0x15b: call to wrmsrl.constprop.0() leaves .noinstr.text section
  vmlinux.o: warning: objtool: vmx_vcpu_enter_exit+0x1bf: call to kvm_arch_has_assigned_device() leaves .noinstr.text section

make it all happy again.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>

Pull ARM SoC fixes from Arnd Bergmann:
 "A number of fixes have accumulated, but they are largely for harmless
  issues:

   - Several OF node leak fixes

   - A fix to the Exynos7885 UART clock description

   - DTS fixes to prevent boot failures on TI AM64 and J721s2

   - Bus probe error handling fixes for Baikal-T1

   - A fixup to the way STM32 SoCs use separate dts files for different
     firmware stacks

   - Multiple code fixes for Arm SCMI firmware, all dealing with
     robustness of the implementation

   - Multiple NXP i.MX devicetree fixes, addressing incorrect data in DT
     nodes

   - Three updates to the MAINTAINERS file, including Florian Fainelli
     taking over BCM283x/BCM2711 (Raspberry Pi) from Nicolas Saenz
     Julienne"

* tag 'soc-fixes-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (29 commits)
  ARM: dts: aspeed: nuvia: rename vendor nuvia to qcom
  arm: mach-spear: Add missing of_node_put() in time.c
  ARM: cns3xxx: Fix refcount leak in cns3xxx_init
  MAINTAINERS: Update email address
  arm64: dts: ti: k3-am64-main: Remove support for HS400 speed mode
  arm64: dts: ti: k3-j721s2: Fix overlapping GICD memory region
  ARM: dts: bcm2711-rpi-400: Fix GPIO line names
  bus: bt1-axi: Don't print error on -EPROBE_DEFER
  bus: bt1-apb: Don't print error on -EPROBE_DEFER
  ARM: Fix refcount leak in axxia_boot_secondary
  ARM: dts: stm32: move SCMI related nodes in a dedicated file for stm32mp15
  soc: imx: imx8m-blk-ctrl: fix display clock for LCDIF2 power domain
  ARM: dts: imx6qdl-colibri: Fix capacitive touch reset polarity
  ARM: dts: imx6qdl: correct PU regulator ramp delay
  firmware: arm_scmi: Fix incorrect error propagation in scmi_voltage_descriptors_get
  firmware: arm_scmi: Avoid using extended string-buffers sizes if not necessary
  firmware: arm_scmi: Fix SENSOR_AXIS_NAME_GET behaviour when unsupported
  ARM: dts: imx7: Move hsic_phy power domain to HSIC PHY node
  soc: bcm: brcmstb: pm: pm-arm: Fix refcount leak in brcmstb_pm_probe
  MAINTAINERS: Update BCM2711/BCM2835 maintainer
  ...

Pull hotfixes from Andrew Morton:
 "Minor things, mainly - mailmap updates, MAINTAINERS updates, etc.

  Fixes for this merge window:

   - fix for a damon boot hang, from SeongJae

   - fix for a kfence warning splat, from Jason Donenfeld

   - fix for zero-pfn pinning, from Alex Williamson

   - fix for fallocate hole punch clearing, from Mike Kravetz

  Fixes for previous releases:

   - fix for a performance regression, from Marcelo

   - fix for a hwpoisining BUG from zhenwei pi"

* tag 'mm-hotfixes-stable-2022-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  mailmap: add entry for Christian Marangi
  mm/memory-failure: disable unpoison once hw error happens
  hugetlbfs: zero partial pages during fallocate hole punch
  mm: memcontrol: reference to tools/cgroup/memcg_slabinfo.py
  mm: re-allow pinning of zero pfns
  mm/kfence: select random number before taking raw lock
  MAINTAINERS: add maillist information for LoongArch
  MAINTAINERS: update MM tree references
  MAINTAINERS: update Abel Vesa's email
  MAINTAINERS: add MEMORY HOT(UN)PLUG section and add David as reviewer
  MAINTAINERS: add Miaohe Lin as a memory-failure reviewer
  mailmap: add alias for jarkko@profian.com
  mm/damon/reclaim: schedule 'damon_reclaim_timer' only after 'system_wq' is initialized
  kthread: make it clear that kthread_create_on_node() might be terminated by any fatal signal
  mm: lru_cache_disable: use synchronize_rcu_expedited
  mm/page_isolation.c: fix one kernel-doc comment

Merge tag 'perf-tools-fixes-for-v5.19-2022-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Enable ignore_missing_thread in 'perf stat', enabling counting with
   '--pid' when threads disappear during counting session setup

 - Adjust output data offset for backward compatibility in 'perf inject'

 - Fix missing free in copy_kcore_dir() in 'perf inject'

 - Fix caching files with a wrong build ID

 - Sync drm, cpufeatures, vhost and svn headers with the kernel

* tag 'perf-tools-fixes-for-v5.19-2022-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  tools headers UAPI: Synch KVM's svm.h header with the kernel
  tools include UAPI: Sync linux/vhost.h with the kernel sources
  perf stat: Enable ignore_missing_thread
  perf inject: Adjust output data offset for backward compatibility
  perf trace beauty: Fix generation of errno id->str table on ALT Linux
  perf build-id: Fix caching files with a wrong build ID
  tools headers cpufeatures: Sync with the kernel sources
  tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
  perf inject: Fix missing free in copy_kcore_dir()

Pull btrfs fixes from David Sterba:

 - zoned relocation fixes:
      - fix critical section end for extent writeback, this could lead
        to out of order write
      - prevent writing to previous data relocation block group if space
        gets low

 - reflink fixes:
      - fix race between reflinking and ordered extent completion
      - proper error handling when block reserve migration fails
      - add missing inode iversion/mtime/ctime updates on each iteration
        when replacing extents

 - fix deadlock when running fsync/fiemap/commit at the same time

 - fix false-positive KCSAN report regarding pid tracking for read locks
   and data race

 - minor documentation update and link to new site

* tag 'for-5.19-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  Documentation: update btrfs list of features and link to readthedocs.io
  btrfs: fix deadlock with fsync+fiemap+transaction commit
  btrfs: don't set lock_owner when locking extent buffer for reading
  btrfs: zoned: fix critical section of relocation inode writeback
  btrfs: zoned: prevent allocation from previous data relocation BG
  btrfs: do not BUG_ON() on failure to migrate space when replacing extents
  btrfs: add missing inode updates on each iteration when replacing extents
  btrfs: fix race between reflinking and ordered extent completion

Pull dma-mapping fix from Christoph Hellwig:

 - pass the correct size to dma_set_encrypted() when freeing memory
   (Dexuan Cui)

* tag 'dma-mapping-5.19-2022-06-26' of git://git.infradead.org/users/hch/dma-mapping:
  dma-direct: use the correct size for dma_set_encrypted()

Pull fbdev fixes from Helge Deller:
 "Two bug fixes for the pxa3xx and intelfb drivers:

   - pxa3xx-gcu: Fix integer overflow in pxa3xx_gcu_write

   - intelfb: Initialize value of stolen size

  The other changes are small cleanups, simplifications and
  documentation updates to the cirrusfb, skeletonfb, omapfb,
  intelfb, au1100fb and simplefb drivers"

* tag 'for-5.19/fbdev-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
  video: fbdev: omap: Remove duplicate 'the' in comment
  video: fbdev: omapfb: Align '*' in comment
  video: fbdev: simplefb: Check before clk_put() not needed
  video: fbdev: au1100fb: Drop unnecessary NULL ptr check
  video: fbdev: pxa3xx-gcu: Fix integer overflow in pxa3xx_gcu_write
  video: fbdev: skeletonfb: Convert to generic power management
  video: fbdev: cirrusfb: Remove useless reference to PCI power management
  video: fbdev: intelfb: Initialize value of stolen size
  video: fbdev: intelfb: Use aperture size from pci_resource_len
  video: fbdev: skeletonfb: Fix syntax errors in comments

Pull parisc architecture fixes from Helge Deller:

 - enable ARCH_HAS_STRICT_MODULE_RWX to prevent a boot crash on c8000
   machines

 - flush all mappings of a shared anonymous page on PA8800/8900 machines
   via flushing the whole data cache. This may slow down such machines
   but makes sure that the cache is consistent

 - Fix duplicate definition build error regarding fb_is_primary_device()

* tag 'for-5.19/parisc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Enable ARCH_HAS_STRICT_MODULE_RWX
  parisc: Fix flush_anon_page on PA8800/PA8900
  parisc: align '*' in comment in math-emu code
  parisc/stifb: Fix fb_is_primary_device() only available with CONFIG_FB_STI

Pull xtensa fixes from Max Filippov:

 - fix OF reference leaks in xtensa arch code

 - replace '.bss' with '.section .bss' to fix entry.S build with old
   assembler

* tag 'xtensa-20220626' of https://github.com/jcmvbkbc/linux-xtensa:
  xtensa: change '.bss' to '.section .bss'
  xtensa: xtfpga: Fix refcount leak bug in setup
  xtensa: Fix refcount leak bug in time.c

Pull powerpc fixes from Michael Ellerman:

 - A fix for a CMA change that broke booting guests with > 2G RAM on
   Power8 hosts.

 - Fix the RTAS call filter to allow a special case that applications
   rely on.

 - A change to our execve path, to make the execve syscall exit
   tracepoint work.

 - Three fixes to wire up our various RNGs earlier in boot so they're
   available for use in the initial seeding in random_init().

 - A build fix for when KASAN is enabled along with
   STRUCTLEAK_BYREF_ALL.

Thanks to Andrew Donnellan, Aneesh Kumar K.V, Christophe Leroy, Jason
Donenfeld, Nathan Lynch, Naveen N. Rao, Sathvika Vasireddy, Sumit
Dubey2, Tyrel Datwyler, and Zi Yan.

* tag 'powerpc-5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/powernv: wire up rng during setup_arch
  powerpc/prom_init: Fix build failure with GCC_PLUGIN_STRUCTLEAK_BYREF_ALL and KASAN
  powerpc/rtas: Allow ibm,platform-dump RTAS call with null buffer address
  powerpc: Enable execve syscall exit tracepoint
  powerpc/pseries: wire up rng during setup_arch()
  powerpc/microwatt: wire up rng during setup_arch()
  powerpc/mm: Move CMA reservations after initmem_init()

Merge tag 'kbuild-fixes-v5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Fix modpost to detect EXPORT_SYMBOL marked as __init or__exit

 - Update the supported arch list in the LLVM document

 - Avoid the second link of vmlinux for CONFIG_TRIM_UNUSED_KSYMS

 - Avoid false __KSYM___this_module define in include/generated/autoksyms.h

* tag 'kbuild-fixes-v5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: Ignore __this_module in gen_autoksyms.sh
  kbuild: link vmlinux only once for CONFIG_TRIM_UNUSED_KSYMS (2nd attempt)
  Documentation/llvm: Update Supported Arch table
  modpost: fix section mismatch check for exported init/exit sections

Pull exfat fix from Namjae Jeon:

 - Use updated exfat_chain directly instead of snapshot values in
   rename.

* tag 'exfat-for-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
  exfat: use updated exfat_chain directly during renaming

Pull cifs client fixes from Steve French:
 "Fixes addressing important multichannel, and reconnect issues.

  Multichannel mounts when the server network interfaces changed, or ip
  addresses changed, uncovered problems, especially in reconnect, but
  the patches for this were held up until recently due to some lock
  conflicts that are now addressed.

  Included in this set of fixes:

   - three fixes relating to multichannel reconnect, dynamically
     adjusting the list of server interfaces to avoid problems during
     reconnect

   - a lock conflict fix related to the above

   - two important fixes for negotiate on secondary channels (null
     netname can unintentionally cause multichannel to be disabled to
     some servers)

   - a reconnect fix (reporting incorrect IP address in some cases)"

* tag '5.19-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: update cifs_ses::ip_addr after failover
  cifs: avoid deadlocks while updating iface
  cifs: periodically query network interfaces from server
  cifs: during reconnect, update interface if necessary
  cifs: change iface_list from array to sorted linked list
  smb3: use netname when available on secondary channels
  smb3: fix empty netname context on secondary channels

To pick up the changes from:

  d5af44dd ("x86/sev: Provide support for SNP guest request NAEs")
  0afb6b66 ("x86/sev: Use SEV-SNP AP creation to start secondary CPUs")
  dc3f3d24 ("x86/mm: Validate memory when changing the C-bit")
  cbd3d4f7 ("x86/sev: Check SEV-SNP features support")

That gets these new SVM exit reasons:

+       { SVM_VMGEXIT_PSC,              "vmgexit_page_state_change" }, \
+       { SVM_VMGEXIT_GUEST_REQUEST,    "vmgexit_guest_request" }, \
+       { SVM_VMGEXIT_EXT_GUEST_REQUEST, "vmgexit_ext_guest_request" }, \
+       { SVM_VMGEXIT_AP_CREATION,      "vmgexit_ap_creation" }, \
+       { SVM_VMGEXIT_HV_FEATURES,      "vmgexit_hypervisor_feature" }, \

Addressing this perf build warning:

  Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/svm.h' differs from latest version at 'arch/x86/include/uapi/asm/svm.h'
  diff -u tools/arch/x86/include/uapi/asm/svm.h arch/x86/include/uapi/asm/svm.h

This causes these changes:

  CC      /tmp/build/perf-urgent/arch/x86/util/kvm-stat.o
  LD      /tmp/build/perf-urgent/arch/x86/util/perf-in.o
  LD      /tmp/build/perf-urgent/arch/x86/perf-in.o
  LD      /tmp/build/perf-urgent/arch/perf-in.o
  LD      /tmp/build/perf-urgent/perf-in.o
  LINK    /tmp/build/perf-urgent/perf

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>