Performance Determinism is a new mode in Aldebaran where PMFW tries to
maintain sustained performance level. It can be enabled on a per-die
basis on aldebaran. To guarantee that it remains within the power cap,
a max GFX frequency needs to be specified in this mode. A new
power_dpm_force_performance_level, "perf_determinism", is defined to enable
this mode in amdgpu. The max frequency (in MHz) can be specified through
pp_dpm_sclk. The mode will be disabled once any other performance level
is chosen.

Ex: To enable perf determinism at 900Mhz max gfx clock

echo perf_determinism > /sys/bus/pci/devices/.../power_dpm_force_performance_level
echo max 900 > /sys/bus/pci/devices/.../pp_dpm_sclk
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

On aldebaran DCBTC should be run after enabling DPM. DCBTC won't be run
if support is not enabled in PPTable. Without PPTable support the message
is dummy and will return success always.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Aldebaran doesn't have AC/DC power limits. Separate the implementation
from SMU13. Max power limit is queried from PPTable.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The psp supplies the link type in the upper 2 bits of the psp xgmi node
information num_hops field.  With a new link type, Aldebaran has these
bits set to a non-zero value (1 = xGMI3) so the KFD topology will report
the incorrect IO link weights without proper masking.
The actual number of hops is located in the 3 least significant bits of
this field so mask if off accordingly before passing it to the KFD.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Amber Lin <amber.lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

By default this timestamp is 32 bit counter. It gets
overflowed in around 10 minutes.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

If xnack is on, VM retry fault interrupt send to IH ring1, and ring1
will be full quickly. IH cannot receive other interrupts, this causes
deadlock if migrating buffer using sdma and waiting for sdma done while
handling retry fault.

Remove VMC from IH storm client, enable ring1 write pointer overflow,
then IH will drop retry fault interrupts and be able to receive other
interrupts while driver is handling retry fault.

IH ring1 write pointer doesn't writeback to memory by IH, and ring1
write pointer recorded by self-irq is not updated, so always read
the latest ring1 write pointer from register.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

With the current kfd memory accounting scheme, kfd applications
can use up to 15/16 of total system memory. For system which
has small total system memory size it leaves small system memory
for OS. For example, if the system has totally 16GB of system
memory, this scheme leave OS and non-kfd applications only 1GB
of system memory. In many cases, this leads to OOM killer.

This patch changed the KFD system memory accounting scheme.
15/16 of free system memory when kfd driver load. This deduct
the system memory that OS already use.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Suggested-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Arcturus and onwards products should follow the same sequence
that have pmfw loading ahead of tmr setup
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Aldebaran MMHUB CG/LS logic is controlled by VBIOS. Enable the state
change logic only if driver is used for control.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

v1: The interrupts need to be enabled to move to DS clocks.
v2: Don't enable GFX IDLE interrupts if there are no GFX rings.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Remove SMU_MSG_GfxDriverReset generic index.
Always use SMU_MSG_GfxDeviceDriverReset as the generic index for reset.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Use the correct mapping for mode-reset messages on aldebaran
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

PrepareMp1Reset and SoftReset messages are not supported on aldebaran.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Aldebaran clock gating support for GFX,SDMA,IH blocks
VCN/JPEG blocks are excluded in this patch, to be enabled later
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add the mmhub client id table for aldebaran.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Enable dpg indirect sram mode on aldebaran.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Enable vcn dpg mode on aldebaran
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Enable vcn and jpeg 2.6 on aldebaran.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Enable smu13 block on aldebaran
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

global noretry setting now is cached to gmc.noretry
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

get_num_acc_vgprs does not set status.scc if the number of acc vgprs
is 0, so use an and instruction to set the condition code.

The Aldebaran handler binary was not based on the latest version of
the sources, so this update to the binary is the minimal change only
adding two instructions to set the condition code.

A newer version of the handler should be generated and tested in
another commit.
Signed-off-by: Laurent Morichetti <laurent.morichetti@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

For GPUs that don't support fan control, set the no fan control flag so
that they don't appear in hwmon sensors.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

hdp read cache is removed in aldebaran. don't issue
an mmio write or write data packet to hardware.

v2: rebase
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Simplify all Aldebaran DIDs into one ASIC type.
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
This causes infinite retries on the UTCL1 RB, preventing
higher priority RB such as paging RB.

[How]
Set to one the SDMAx_UTLC1_TIMEOUT registers for all SDMAs.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

0x61 is assigned to HBM2E in atom_dgpu_vram_type.
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

driver should use the gfx_info atomfirmware interface
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

For ASICs that don't support ip discovery feature, query
gfx configuration through atomfirmware interface, rather
than gpu_info firmware.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

PPSMC_MSG_SetSystemVirtualDramAddrHigh/Low messages are not handled by
PMFW in aldebaran
Signed-off-by: Lijo Lazar <Lijo.Lazar@amd.com>
Reviewed-by: Kenneth Feng <Kenneth.Feng@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Temporarily force to use BU PPTable defined in VBIOS. Add support to
override PPTable defined by module parameter.Add FW reported version to
kernel log.
Signed-off-by: Lijo Lazar <Lijo.Lazar@amd.com>
Reviewed-by: Kenneth Feng <Kenneth.Feng@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Temporarily add smu_pptable module parameter for aldebaran.This is used
to force soft PPTable use overriding any VBIOS PPTable.
Signed-off-by: Lijo Lazar <Lijo.Lazar@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add atom_smc_dpm_info_v4_10 that defines board parameters for aldebaran
Signed-off-by: Lijo Lazar <Lijo.Lazar@amd.com>
Reviewed-by: Kenneth Feng <Kenneth.Feng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Disable PCIe BAR resizing on A+A config. It's not needed because we won't use the
PCIe BAR, but it breaks the PCI BAR configuration with the current SBIOS.

Error message of FB BAR resize failure under A+A:

[  154.913731] [drm:amdgpu_device_resize_fb_bar [amdgpu]] *ERROR* Problem resizing BAR0 (-22).
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Felix Kuehling <Felix.kuehling@amd.com>
Reviewed-by: Christian Koenig <Christian.Koenig@amd.com>
Tested-by: Amber Lin <Amber.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

For A+A configuration, device memory is supposed to be mapped as
cachable from CPU side. For kernel pre-map gpu device memory using
ioremap_cache
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Christian Koenig <Christian.Koenig@amd.com>
Tested-by: Amber Lin <Amber.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

v1: Added some pspbl parameters
v2: fix fallthrough issue
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Lazar Lijo <Lijo.Lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

for SMU config.
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

shall revisit the change later
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

replace vega10 ih block with vega20 ih block for
aldebaran.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

For aldebaran, psp firmware won't program IH_CHICKEN.
it now depends on driver to program it properly so
either bus address or gpu virtual address is just
working for ih ring.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The callback will be invoked to query mmea error
status when needed.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Dennis Li<Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>