Skip to content

L
linux
Switch branch/tag
  1. 16 Oct, 2016 8 commits
    • Lu Baolu's avatar
      mfd: rtsx_usb: Avoid setting ucr->current_sg.status · 6c4c6ae5
      Lu Baolu authored 
      commit 8dcc5ff8 upstream.

Member "status" of struct usb_sg_request is managed by usb core. A
spin lock is used to serialize the change of it. The driver could
check the value of req->status, but should avoid changing it without
the hold of the spinlock. Otherwise, it could cause race or error
in usb core.

This patch could be backported to stable kernels with version later
than v3.14.

Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Roger Tseng <rogerable@realtek.com>
Signed-off-by: default avatarLu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: default avatarLee Jones <lee.jones@linaro.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      6c4c6ae5
    • Takashi Sakamoto's avatar
      ALSA: usb-line6: use the same declaration as definition in header for MIDI manufacturer ID · 14ca6ce4
      Takashi Sakamoto authored 
      commit 8da08ca0 upstream.

Currently, usb-line6 module exports an array of MIDI manufacturer ID and
usb-pod module uses it. However, the declaration is not the definition in
common header. The difference is explicit length of array. Although
compiler calculates it and everything goes well, it's better to use the
same representation between definition and declaration.

This commit fills the length of array for usb-line6 module. As a small
good sub-effect, this commit suppress below warnings from static analysis
by sparse v0.5.0.

sound/usb/line6/driver.c:274:43: error: cannot size expression
sound/usb/line6/driver.c:275:16: error: cannot size expression
sound/usb/line6/driver.c:276:16: error: cannot size expression
sound/usb/line6/driver.c:277:16: error: cannot size expression

Fixes: 705ececd ("Staging: add line6 usb driver")
Signed-off-by: default avatarTakashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      14ca6ce4
    • Anssi Hannula's avatar
      ALSA: usb-audio: Extend DragonFly dB scale quirk to cover other variants · e09db64b
      Anssi Hannula authored 
      commit eb1a74b7 upstream.

The DragonFly quirk added in 42e3121d ("ALSA: usb-audio: Add a more
accurate volume quirk for AudioQuest DragonFly") applies a custom dB map
on the volume control when its range is reported as 0..50 (0 .. 0.2dB).

However, there exists at least one other variant (hw v1.0c, as opposed
to the tested v1.2) which reports a different non-sensical volume range
(0..53) and the custom map is therefore not applied for that device.

This results in all of the volume change appearing close to 100% on
mixer UIs that utilize the dB TLV information.

Add a fallback case where no dB TLV is reported at all if the control
range is not 0..50 but still 0..N where N <= 1000 (3.9 dB). Also
restrict the quirk to only apply to the volume control as there is also
a mute control which would match the check otherwise.

Fixes: 42e3121d ("ALSA: usb-audio: Add a more accurate volume quirk for AudioQuest DragonFly")
Signed-off-by: default avatarAnssi Hannula <anssi.hannula@iki.fi>
Reported-by: default avatarDavid W <regulars@d-dub.org.uk>
Tested-by: default avatarDavid W <regulars@d-dub.org.uk>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      e09db64b
    • Takashi Iwai's avatar
      ALSA: ali5451: Fix out-of-bound position reporting · 80e84e00
      Takashi Iwai authored 
      commit db685779 upstream.

The pointer callbacks of ali5451 driver may return the value at the
boundary occasionally, and it results in the kernel warning like
  snd_ali5451 0000:00:06.0: BUG: , pos = 16384, buffer size = 16384, period size = 1024

It seems that folding the position offset is enough for fixing the
warning and no ill-effect has been seen by that.
Reported-by: default avatarEnrico Mioso <mrkiko.rs@gmail.com>
Tested-by: default avatarEnrico Mioso <mrkiko.rs@gmail.com>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      80e84e00
    • Chen-Yu Tsai's avatar
      phy: sun4i-usb: Use spinlock to guard phyctl register access · 72c6187f
      Chen-Yu Tsai authored 
      commit 919ab252 upstream.

The musb driver calls into this phy driver to disable/enable squelch
detection. This function was introduced in 24fe86a6 ("phy: sun4i-usb:
Add a sunxi specific function for setting squelch-detect"). This
function in turn calls sun4i_usb_phy_write, which uses a mutex to
guard the common access register. Unfortunately musb does this
in atomic context, which results in the following warning with lock
debugging enabled:

BUG: sleeping function called from invalid context at kernel/locking/mutex.c:97
in_atomic(): 1, irqs_disabled(): 128, pid: 96, name: kworker/0:2
CPU: 0 PID: 96 Comm: kworker/0:2 Not tainted 4.8.0-rc4-00181-gd502f8ad1c3e #13
Hardware name: Allwinner sun8i Family
Workqueue: events musb_deassert_reset
[<c010bc01>] (unwind_backtrace) from [<c0109237>] (show_stack+0xb/0xc)
[<c0109237>] (show_stack) from [<c02a669b>] (dump_stack+0x67/0x74)
[<c02a669b>] (dump_stack) from [<c05d68c9>] (mutex_lock+0x15/0x2c)
[<c05d68c9>] (mutex_lock) from [<c02c3589>] (sun4i_usb_phy_write+0x39/0xec)
[<c02c3589>] (sun4i_usb_phy_write) from [<c03e6327>] (musb_port_reset+0xfb/0x184)
[<c03e6327>] (musb_port_reset) from [<c03e4917>] (musb_deassert_reset+0x1f/0x2c)
[<c03e4917>] (musb_deassert_reset) from [<c012ecb5>] (process_one_work+0x129/0x2b8)
[<c012ecb5>] (process_one_work) from [<c012f5e3>] (worker_thread+0xf3/0x424)
[<c012f5e3>] (worker_thread) from [<c0132dbd>] (kthread+0xa1/0xb8)
[<c0132dbd>] (kthread) from [<c0105f31>] (ret_from_fork+0x11/0x20)

Since the register access is mmio, we can use a spinlock to guard this
specific access, rather than the mutex that guards the entire phy.

Fixes: ba4bdc9e ("PHY: sunxi: Add driver for sunxi usb phy")
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: default avatarChen-Yu Tsai <wens@csie.org>
Reviewed-by: default avatarHans de Goede <hdegoede@redhat.com>
Signed-off-by: default avatarKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      72c6187f
    • Lu Baolu's avatar
      usb: dwc3: fix Clear Stall EP command failure · ac8aa11e
      Lu Baolu authored 
      commit 5e6c88d2 upstream.

Commit 50c763f8 ("usb: dwc3: Set the ClearPendIN bit on Clear
Stall EP command") sets ClearPendIN bit for all IN endpoints of
v2.60a+ cores. This causes ClearStall command fails on 2.60+ cores
operating in HighSpeed mode.

In page 539 of 2.60a specification:

"When issuing Clear Stall command for IN endpoints in SuperSpeed
mode, the software must set the "ClearPendIN" bit to '1' to
clear any pending IN transcations, so that the device does not
expect any ACK TP from the host for the data sent earlier."

It's obvious that we only need to apply this rule to those IN
endpoints that currently operating in SuperSpeed mode.

Fixes: 50c763f8 ("usb: dwc3: Set the ClearPendIN bit on Clear Stall EP command")
Signed-off-by: default avatarLu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: default avatarFelipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      ac8aa11e
    • John Stultz's avatar
      timekeeping: Fix __ktime_get_fast_ns() regression · 4e584cfe
      John Stultz authored 
      commit 58bfea95 upstream.

In commit 27727df2 ("Avoid taking lock in NMI path with
CONFIG_DEBUG_TIMEKEEPING"), I changed the logic to open-code
the timekeeping_get_ns() function, but I forgot to include
the unit conversion from cycles to nanoseconds, breaking the
function's output, which impacts users like perf.

This results in bogus perf timestamps like:
 swapper     0 [000]   253.427536:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]   254.426573:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]   254.426687:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]   254.426800:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]   254.426905:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]   254.427022:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]   254.427127:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]   254.427239:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]   254.427346:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]   254.427463:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]   255.426572:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])

Instead of more reasonable expected timestamps like:
 swapper     0 [000]    39.953768:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]    40.064839:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]    40.175956:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]    40.287103:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]    40.398217:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]    40.509324:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]    40.620437:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]    40.731546:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]    40.842654:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]    40.953772:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]    41.064881:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])

Add the proper use of timekeeping_delta_to_ns() to convert
the cycle delta to nanoseconds as needed.

Thanks to Brendan and Alexei for finding this quickly after
the v4.8 release. Unfortunately the problematic commit has
landed in some -stable trees so they'll need this fix as
well.

Many apologies for this mistake. I'll be looking to add a
perf-clock sanity test to the kselftest timers tests soon.

Fixes: 27727df2 "timekeeping: Avoid taking lock in NMI path with CONFIG_DEBUG_TIMEKEEPING"
Reported-by: default avatarBrendan Gregg <bgregg@netflix.com>
Reported-by: default avatarAlexei Starovoitov <alexei.starovoitov@gmail.com>
Tested-and-reviewed-by: default avatarMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: default avatarJohn Stultz <john.stultz@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1475636148-26539-1-git-send-email-john.stultz@linaro.orgSigned-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      4e584cfe
    • Heiner Kallweit's avatar
      usb: storage: fix runtime pm issue in usb_stor_probe2 · c8661aaa
      Heiner Kallweit authored 
      commit a094760b upstream.

Since commit 71723f95 "PM / runtime: print error when activating a
child to unactive parent" I see the following error message:

scsi host2: usb-storage 1-3:1.0
scsi host2: runtime PM trying to activate child device host2 but parent
	    (1-3:1.0) is not active

Digging into it it seems to be related to the problem described in the
commit message for cd998ded "i2c: designware: Prevent runtime
suspend during adapter registration" as scsi_add_host also calls
device_add and after the call to device_add the parent device is
suspended.

Fix this by using the approach from the mentioned commit and getting
the runtime pm reference before calling scsi_add_host.
Signed-off-by: default avatarHeiner Kallweit <hkallweit1@gmail.com>
Acked-by: default avatarAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      c8661aaa
  3. 07 Oct, 2016 11 commits
  5. 02 Oct, 2016 7 commits
    • Linus Torvalds's avatar
      Linux 4.8 · c8d2bc9b
      Linus Torvalds authored
      c8d2bc9b
    • Linus Torvalds's avatar
      Merge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm · f76d9c61
      Linus Torvalds authored 
      Pull ARM fixes from Russell King:
 "Three relatively small fixes for ARM:

   - Roger noticed that dma_max_pfn() was calculating the upper limit
     wrongly, by adding the PFN offset of memory twice.

   - A fix from Robin to correct parsing of MPIDR values when the
     address size is larger than one BE32 unit.

   - A fix from Srinivas to ensure that we do not rely on the boot
     loader (or previous Linux kernel) setting the translation table
     base register a certain way in the decompressor, which can lead to
     crashes"

* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8618/1: decompressor: reset ttbcr fields to use TTBR0 on ARMv7
  ARM: 8617/1: dma: fix dma_max_pfn()
  ARM: 8616/1: dt: Respect property size when parsing CPUs
      f76d9c61
    • Srinivas Ramana's avatar
      ARM: 8618/1: decompressor: reset ttbcr fields to use TTBR0 on ARMv7 · 117e5e9c
      Srinivas Ramana authored 
      If the bootloader uses the long descriptor format and jumps to
kernel decompressor code, TTBCR may not be in a right state.
Before enabling the MMU, it is required to clear the TTBCR.PD0
field to use TTBR0 for translation table walks.

The commit dbece458 ("ARM: 7501/1: decompressor:
reset ttbcr for VMSA ARMv7 cores") does the reset of TTBCR.N, but
doesn't consider all the bits for the size of TTBCR.N.

Clear TTBCR.PD0 field and reset all the three bits of TTBCR.N to
indicate the use of TTBR0 and the correct base address width.

Fixes: dbece458 ("ARM: 7501/1: decompressor: reset ttbcr for VMSA ARMv7 cores")
Acked-by: default avatarRobin Murphy <robin.murphy@arm.com>
Signed-off-by: default avatarSrinivas Ramana <sramana@codeaurora.org>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
      117e5e9c
    • Linus Torvalds's avatar
      Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · be67d60b
      Linus Torvalds authored 
      Pull x86 fixes from Thomas Gleixner:
 "The last regression fixes for 4.8 final:

   - Two patches addressing the fallout of the CR4 optimizations which
     caused CR4-less machines to fail.

   - Fix the VDSO build on big endian machines

   - Take care of FPU initialization if no CPUID is available otherwise
     task struct size ends up being zero

   - Fix up context tracking in case load_gs_index fails"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/entry/64: Fix context tracking state warning when load_gs_index fails
  x86/boot: Initialize FPU and X86_FEATURE_ALWAYS even if we don't have CPUID
  x86/vdso: Fix building on big endian host
  x86/boot: Fix another __read_cr4() case on 486
  x86/init: Fix cr4_init_shadow() on CR4-less machines
      be67d60b
    • Linus Torvalds's avatar
      Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus · 66188fb1
      Linus Torvalds authored 
      Pull MIPS fixes from Ralf Baechle:
 "Another round of fixes:

   - CM: Fix mips_cm_max_vp_width for non-MT kernels on MT systems
   - CPS: Avoid BUG() when offlining pre-r6 CPUs
   - DEC: Avoid gas warnings due to suspicious instruction scheduling by
     manually expanding assembler macros.
   - FTLB: Fix configuration by moving confiuguratoin after probing
   - FTLB: clear execution hazard after changing FTLB enable
   - Highmem: Fix detection of unsupported highmem with cache aliases
   - I6400: Don't touch FTLBP chicken bits
   - microMIPS: Fix BUILD_ROLLBACK_PROLOGUE
   - Malta: Fix IOCU disable switch read for MIPS64
   - Octeon: Fix probing of devices attached to GPIO lines
   - uprobes: Misc small fixes"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: CM: Fix mips_cm_max_vp_width for non-MT kernels on MT systems
  MIPS: Fix detection of unsupported highmem with cache aliases
  MIPS: Malta: Fix IOCU disable switch read for MIPS64
  MIPS: Fix BUILD_ROLLBACK_PROLOGUE for microMIPS
  MIPS: clear execution hazard after changing FTLB enable
  MIPS: Configure FTLB after probing TLB sizes from config4
  MIPS: Stop setting I6400 FTLBP
  MIPS: DEC: Avoid la pseudo-instruction in delay slots
  MIPS: Octeon: mark GPIO controller node not populated after IRQ init.
  MIPS: uprobes: fix use of uninitialised variable
  MIPS: uprobes: remove incorrect set_orig_insn
  MIPS: fix uretprobe implementation
  MIPS: smp-cps: Avoid BUG() when offlining pre-r6 CPUs
      66188fb1
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc · 0c7fc30f
      Linus Torvalds authored 
      Pull sparc fixes from David Miller:

 1) Fix section mismatches in some builds, from Paul Gortmaker.

 2) Need to count huge zero page mappings when doing TSB sizing, from
    Mike Kravetz.

 3) Fix handing of cpu_possible_mask when nr_cpus module option is
    specified, from Atish Patra.

 4) Don't allocate irq stacks until nr_irqs has been processed, also
    from Atish Patra.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc64: Fix non-SMP build.
  sparc64: Fix irq stack bootmem allocation.
  sparc64: Fix cpu_possible_mask if nr_cpus is set
  sparc64 mm: Fix more TSB sizing issues
  sparc64: fix section mismatch in find_numa_latencies_for_group
      0c7fc30f
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · bb6bbc7c
      Linus Torvalds authored 
      Pull networking fixes from David Miller:

 1) Fix wrong TCP checksums on MTU probing when checksum offloading is
    disabled, from Douglas Caetano dos Santos.

 2) Fix qdisc backlog updates in qfq and sfb schedulers, from Cong Wang.

 3) Route lookup flow key protocol value is wrong in ip6gre_xmit_other(),
    fix from Lance Richardson.

 4) Scheduling while atomic in multicast routing code of ipv4 and ipv6,
    fix from Nikolay Aleksandrov.

 5) Fix packet alignment in fec driver, from Eric Nelson.

 6) Fix perf regression in sctp due to struct layout and cache misses,
    from Xin Long.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  sctp: fix the issue sctp_diag uses lock_sock in rcu_read_lock
  sctp: change to check peer prsctp_capable when using prsctp polices
  sctp: remove prsctp_param from sctp_chunk
  sctp: move sent_count to the memory hole in sctp_chunk
  tg3: Avoid NULL pointer dereference in tg3_io_error_detected()
  act_ife: Fix false encoding
  act_ife: Fix external mac header on encode
  VSOCK: Don't dec ack backlog twice for rejected connections
  Revert "net: ethernet: bcmgenet: use phydev from struct net_device"
  net: fec: align IP header in hardware
  net: fec: remove QUIRK_HAS_RACC from i.mx27
  net: fec: remove QUIRK_HAS_RACC from i.mx25
  ipmr, ip6mr: fix scheduling while atomic and a deadlock with ipmr_get_route
  ip6_gre: fix flowi6_proto value in ip6gre_xmit_other()
  tcp: fix a compile error in DBGUNDO()
  tcp: fix wrong checksum calculation on MTU probing
  sch_sfb: keep backlog updated with qlen
  sch_qfq: keep backlog updated with qlen
  can: dev: fix deadlock reported after bus-off
      bb6bbc7c
  7. 01 Oct, 2016 3 commits
  9. 30 Sep, 2016 11 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7