Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c: In function ‘_rtl88e_phy_path_a_iqk’:
 drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c:1351:33: warning: variable ‘reg_ea4’ set but not used [-Wunused-but-set-variable]

Cc: Ping-Ke Shih <pkshih@realtek.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201102112410.1049272-30-lee.jones@linaro.org

Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/realtek/rtlwifi/rtl8723be/phy.c: In function ‘_rtl8723be_phy_lc_calibrate’:
 drivers/net/wireless/realtek/rtlwifi/rtl8723be/phy.c:2181:36: warning: variable ‘lc_cal’ set but not used [-Wunused-but-set-variable]

Cc: Ping-Ke Shih <pkshih@realtek.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201102112410.1049272-29-lee.jones@linaro.org

Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a1ant.c: In function ‘btc8821a1ant_run_coexist_mechanism’:
 drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a1ant.c:1904:5: warning: variable ‘wifi_rssi_state’ set but not used [-Wunused-but-set-variable]

Cc: Ping-Ke Shih <pkshih@realtek.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201102112410.1049272-28-lee.jones@linaro.org

Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/realtek/rtlwifi/rtl8723ae/phy.c: In function ‘_rtl8723e_phy_iq_calibrate’:
 drivers/net/wireless/realtek/rtlwifi/rtl8723ae/phy.c:1150:6: warning: variable ‘bbvalue’ set but not used [-Wunused-but-set-variable]

Cc: Ping-Ke Shih <pkshih@realtek.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201102112410.1049272-27-lee.jones@linaro.org

Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c: In function ‘btc8723b2ant_action_wifi_idle_process’:
 drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:1631:40: warning: variable ‘bt_rssi_state’ set but not used [-Wunused-but-set-variable]
 drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:1631:5: warning: variable ‘wifi_rssi_state’ set but not used [-Wunused-but-set-variable]
 drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c: In function ‘btc8723b2ant_action_sco’:
 drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:2767:5: warning: variable ‘wifi_rssi_state’ set but not used [-Wunused-but-set-variable]
 drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c: In function ‘btc8723b2ant_action_hid’:
 drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:2810:5: warning: variable ‘wifi_rssi_state’ set but not used [-Wunused-but-set-variable]
 drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c: In function ‘btc8723b2ant_action_a2dp’:
 drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:2855:5: warning: variable ‘wifi_rssi_state’ set but not used [-Wunused-but-set-variable]
 drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c: In function ‘btc8723b2ant_action_a2dp_pan_hs’:
 drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:2929:5: warning: variable ‘wifi_rssi_state’ set but not used [-Wunused-but-set-variable]
 drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c: In function ‘btc8723b2ant_action_pan_edr’:
 drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:2976:5: warning: variable ‘wifi_rssi_state’ set but not used [-Wunused-but-set-variable]
 drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c: In function ‘btc8723b2ant_action_pan_hs’:
 drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:3028:22: warning: variable ‘wifi_rssi_state1’ set but not used [-Wunused-but-set-variable]
 drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:3028:5: warning: variable ‘wifi_rssi_state’ set but not used [-Wunused-but-set-variable]
 drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c: In function ‘btc8723b2ant_action_pan_edr_a2dp’:
 drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:3066:5: warning: variable ‘wifi_rssi_state’ set but not used [-Wunused-but-set-variable]
 drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c: In function ‘btc8723b2ant_action_pan_edr_hid’:
 drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:3121:5: warning: variable ‘wifi_rssi_state’ set but not used [-Wunused-but-set-variable]
 drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c: In function ‘btc8723b2ant_action_hid_a2dp_pan_edr’:
 drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:3185:5: warning: variable ‘wifi_rssi_state’ set but not used [-Wunused-but-set-variable]
 drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c: In function ‘btc8723b2ant_action_hid_a2dp’:
 drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:3244:5: warning: variable ‘wifi_rssi_state’ set but not used [-Wunused-but-set-variable]

Cc: Ping-Ke Shih <pkshih@realtek.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201102112410.1049272-26-lee.jones@linaro.org

Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/realtek/rtlwifi/rtl8192cu/trx.c:455: warning: Function parameter or member 'txdesc' not described in '_rtl_tx_desc_checksum'

Cc: Ping-Ke Shih <pkshih@realtek.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201102112410.1049272-6-lee.jones@linaro.org

Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c:124: warning: Function parameter or member 'hw' not described in 'rtl92c_llt_write'
 drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c:124: warning: Excess function parameter 'io' description in 'rtl92c_llt_write'
 drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c:155: warning: Function parameter or member 'hw' not described in 'rtl92c_init_llt_table'
 drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c:155: warning: Excess function parameter 'io' description in 'rtl92c_init_llt_table'

Cc: Ping-Ke Shih <pkshih@realtek.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201102112410.1049272-4-lee.jones@linaro.org

Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/realtek/rtw88/rtw8822c.c: In function ‘rtw8822c_dpk_dc_corr_check’:
 drivers/net/wireless/realtek/rtw88/rtw8822c.c:2445:5: warning: variable ‘corr_val’ set but not used [-Wunused-but-set-variable]

Cc: Yan-Hsuan Chuang <yhchuang@realtek.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201102112410.1049272-39-lee.jones@linaro.org
Link: https://lore.kernel.org/r/20201102112410.1049272-39-lee.jones@linaro.org

Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/ti/wlcore/spi.c:403: warning: Function parameter or member 'child' not described in 'wl12xx_spi_set_block_size'
 drivers/net/wireless/ti/wlcore/spi.c:403: warning: Function parameter or member 'blksz' not described in 'wl12xx_spi_set_block_size'
 drivers/net/wireless/ti/wlcore/spi.c:440: warning: Excess function parameter 'res' description in 'wlcore_probe_of'

Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Luciano Coelho <luciano.coelho@nokia.com>
Cc: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201102112410.1049272-36-lee.jones@linaro.org
Link: https://lore.kernel.org/r/20201102112410.1049272-37-lee.jones@linaro.org

Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/marvell/mwifiex/pcie.c: In function ‘mwifiex_pcie_remove’:
 drivers/net/wireless/marvell/mwifiex/pcie.c:432:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
 drivers/net/wireless/marvell/mwifiex/pcie.c: In function ‘mwifiex_cleanup_pcie’:
 drivers/net/wireless/marvell/mwifiex/pcie.c:3142:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]

Cc: Amitkumar Karwar <amitkarwar@gmail.com>
Cc: Ganapathi Bhat <ganapathi.bhat@nxp.com>
Cc: Xinming Hu <huxinming820@gmail.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201102112410.1049272-32-lee.jones@linaro.org

Fixes the following W=1 kernel build warning(s):

 In file included from drivers/net/wireless/wl3501_cs.c:57:
 drivers/net/wireless/wl3501_cs.c:143: warning: Function parameter or member 'reg_domain' not described in 'iw_valid_channel'
 drivers/net/wireless/wl3501_cs.c:143: warning: Excess function parameter 'reg_comain' description in 'iw_valid_channel'
 drivers/net/wireless/wl3501_cs.c:469: warning: Function parameter or member 'data' not described in 'wl3501_send_pkt'
 drivers/net/wireless/wl3501_cs.c:469: warning: Function parameter or member 'len' not described in 'wl3501_send_pkt'

Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Fox Chen <mhchen@golf.ccl.itri.org.tw>
Cc: de Melo <acme@conectiva.com.br>
Cc: Gustavo Niemeyer <niemeyer@conectiva.com>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201102112410.1049272-25-lee.jones@linaro.org

Fixes the following W=1 kernel build warning(s):

 from drivers/net/wireless/intersil/prism54/isl_ioctl.c:22:
 inlined from ‘prism54_get_name’ at drivers/net/wireless/intersil/prism54/isl_ioctl.c:283:2:
 drivers/net/wireless/intersil/prism54/isl_ioctl.c:68: warning: Function parameter or member 'priv' not described in 'prism54_mib_mode_helper'
 drivers/net/wireless/intersil/prism54/isl_ioctl.c:68: warning: Excess function parameter 'mib' description in 'prism54_mib_mode_helper'
 drivers/net/wireless/intersil/prism54/isl_ioctl.c:127: warning: Function parameter or member 'priv' not described in 'prism54_mib_init'

Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Aurelien Alleaume <slts@free.fr>
Cc: Valerio Riedel <hvr@gnu.org>
Cc: "Luis R. Rodriguez" <mcgrof@ruslug.rutgers.edu>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201102112410.1049272-15-lee.jones@linaro.org

Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/ti/wl1251/cmd.c:70: warning: Function parameter or member 'buf_len' not described in 'wl1251_cmd_test'
 drivers/net/wireless/ti/wl1251/cmd.c:70: warning: Excess function parameter 'len' description in 'wl1251_cmd_test'

Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201102112410.1049272-10-lee.jones@linaro.org

Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c:394: warning: Function parameter or member 'gfp' not described in 'brcmf_fweh_process_event'

Cc: Arend van Spriel <arend.vanspriel@broadcom.com>
Cc: Franky Lin <franky.lin@broadcom.com>
Cc: Hante Meuleman <hante.meuleman@broadcom.com>
Cc: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
Cc: Wright Feng <wright.feng@cypress.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: brcm80211-dev-list.pdl@broadcom.com
Cc: brcm80211-dev-list@cypress.com
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201102112410.1049272-19-lee.jones@linaro.org

Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c:766: warning: Function parameter or member 'devinfo' not described in 'brcmf_pcie_bus_console_read'

Cc: Arend van Spriel <arend.vanspriel@broadcom.com>
Cc: Franky Lin <franky.lin@broadcom.com>
Cc: Hante Meuleman <hante.meuleman@broadcom.com>
Cc: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
Cc: Wright Feng <wright.feng@cypress.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: linux-wireless@vger.kernel.org
Cc: brcm80211-dev-list.pdl@broadcom.com
Cc: brcm80211-dev-list@cypress.com
Cc: netdev@vger.kernel.org
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201102112410.1049272-8-lee.jones@linaro.org

Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c:380: warning: Function parameter or member 'pktlist' not described in 'brcmf_sdiod_sglist_rw'
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c:380: warning: Excess function parameter 'pkt' description in 'brcmf_sdiod_sglist_rw'

Cc: Arend van Spriel <arend.vanspriel@broadcom.com>
Cc: Franky Lin <franky.lin@broadcom.com>
Cc: Hante Meuleman <hante.meuleman@broadcom.com>
Cc: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
Cc: Wright Feng <wright.feng@cypress.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: brcm80211-dev-list.pdl@broadcom.com
Cc: brcm80211-dev-list@cypress.com
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201102112410.1049272-7-lee.jones@linaro.org

Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/rsi/rsi_91x_usb_ops.c:22: warning: Incorrect use of kernel-doc format:  * rsi_usb_rx_thread() - This is a kernel thread to receive the packets from
 drivers/net/wireless/rsi/rsi_91x_usb_ops.c:29: warning: Function parameter or member 'common' not described in 'rsi_usb_rx_thread'

Cc: Amitkumar Karwar <amitkarwar@gmail.com>
Cc: Siva Rebbagondla <siva8118@gmail.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201102112410.1049272-5-lee.jones@linaro.org

Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/rsi/rsi_91x_usb.c:26: warning: cannot understand function prototype: 'u16 dev_oper_mode = DEV_OPMODE_STA_BT_DUAL; '
 drivers/net/wireless/rsi/rsi_91x_usb.c:88: warning: Function parameter or member 'endpoint' not described in 'rsi_write_multiple'
 drivers/net/wireless/rsi/rsi_91x_usb.c:88: warning: Excess function parameter 'addr' description in 'rsi_write_multiple'
 drivers/net/wireless/rsi/rsi_91x_usb.c:320: warning: Function parameter or member 'ep_num' not described in 'rsi_rx_urb_submit'
 drivers/net/wireless/rsi/rsi_91x_usb.c:320: warning: Function parameter or member 'mem_flags' not described in 'rsi_rx_urb_submit'

Cc: Amitkumar Karwar <amitkarwar@gmail.com>
Cc: Siva Rebbagondla <siva8118@gmail.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201102112410.1049272-3-lee.jones@linaro.org

rt2800 only gives you survey for current channel.

Survey-based ACS algorithms are failing to perform their job when working
with rt2800.

Make rt2800 save survey for every channel visited and be able to give away
that information.

There is a bug registered https://dev.archive.openwrt.org/ticket/19081 and
this patch solves the issue.
Signed-off-by: Markov Mikhail <markov.mikhail@itmh.ru>
sgruszka: remove unused variable
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201104142524.94375-1-stf_xl@wp.pl

halbtc_send_bt_mp_operation() uses in_interrupt() to determine if it is
safe to invoke wait_for_completion().

The usage of in_interrupt() in drivers is phased out and Linus clearly
requested that code which changes behaviour depending on context should
either be separated or the context be conveyed in an argument passed by the
caller, which usually knows the context.

Aside of that in_interrupt() is not correct as it does not catch preempt
disabled regions which neither can sleep.

halbtc_send_bt_mp_operation() is called from:

 rtl_watchdog_wq_callback()
   rtl_btc_periodical()
     halbtc_get()
       case BTC_GET_U4_BT_PATCH_VER:
         halbtc_get_bt_patch_version()

 which is preemtible context.

   rtl_c2h_content_parsing()
     btc_ops->btc_btinfo_notify()
       rtl_btc_btinfo_notify()
         exhalbtc_bt_info_notify()
           ex_btc8723b1ant_bt_info_notify()
	   ex_btc8821a1ant_bt_info_notify()
	   ex_btc8821a2ant_bt_info_notify()
             btcoexist->btc_set_bt_reg()
               halbtc_set_bt_reg()

   rtl_c2h_content_parsing() is in turn called from:

   rtl_c2hcmd_wq_callback()
     rtl_c2hcmd_launcher()

   which is preemptible context and from:

   _rtl_pci_rx_interrupt
     rtl_c2hcmd_enqueue()

   which is obviously not preemptible but limited to C2H_BT_MP commands
   which does invoke rtl_c2h_content_parsing().

Aside of that it can be reached from:

     halbtc_get()
       case BTC_GET_U4_SUPPORTED_FEATURE:
         halbtc_get_bt_coex_supported_feature()
       case BTC_GET_U4_BT_FORBIDDEN_SLOT_VAL:
         halbtc_get_bt_forbidden_slot_val()
       case BTC_GET_U4_BT_DEVICE_INFO:
         halbtc_get_bt_device_info()
       case BTC_GET_U4_SUPPORTED_VERSION:
         halbtc_get_bt_coex_supported_version()
       case BTC_GET_U4_SUPPORTED_FEATURE:
         halbtc_get_bt_coex_supported_feature()

   btcoexist->btc_get_bt_afh_map_from_bt()
     halbtc_get_bt_afh_map_from_bt()

   btcoexist->btc_get_ble_scan_para_from_bt()
     halbtc_get_ble_scan_para_from_bt()

   btcoexist->btc_get_ble_scan_type_from_bt()
     halbtc_get_ble_scan_type_from_bt()

   btcoexist->btc_get_ant_det_val_from_bt()
     halbtc_get_ant_det_val_from_bt()

   btcoexist->btc_get_bt_coex_supported_version()
     halbtc_get_bt_coex_supported_version()

   btcoexist->btc_get_bt_coex_supported_feature()
     halbtc_get_bt_coex_supported_feature()

None of these have a caller. Welcome to the wonderful world of HALs and
onion layers.

Remove in_interrupt() check.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Ping-Ke Shih <pkshih@realtek.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: linux-wireless@vger.kernel.org
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201101211536.2966644-9-bigeasy@linutronix.de

is_any_client_connect_to_ap() is using in_interrupt() to determine whether
it should acquire the lock prior accessing the list.

The usage of in_interrupt() in drivers is phased out and Linus clearly
requested that code which changes behaviour depending on context should
either be separated or the context be conveyed in an argument passed by the
caller, which usually knows the context.

The function is called from:

    - halbtc_get()

    - halbtc_get()
        halbtc_get_wifi_link_status()

    - halbtc_display_dbg_msg()
	halbtc_display_wifi_status()
          halbtc_get_wifi_link_status()

All top level callers are part of the btc_coexist callback inferface and
are never invoked from a context which can hold the lock already.

The contexts which hold the lock are either protecting list add/del
operations or list walks which never call into any of the btc_coexist
interfaces.

In fact the conditional is outright dangerous because if this function
would be invoked from a BH disabled context the check would avoid taking
the lock while on another CPU the list could be manipulated under the lock.

Remove the in_interrupt() check and always acquire the lock.

To simplify the code further use list_empty() instead of walking the list
and counting the entries just to check the count for > 0 at the end.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Ping-Ke Shih <pkshih@realtek.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: linux-wireless@vger.kernel.org
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201101211536.2966644-8-bigeasy@linutronix.de

The usage of in_atomic() in driver code is deprecated as it can not
always detect all states where it is not allowed to sleep.

All callers are in premptible thread context and all functions invoke core
functions which have checks for invalid calling contexts already.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Ulrich Kunitz <kune@deine-taler.de>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: linux-wireless@vger.kernel.org
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201101211536.2966644-7-bigeasy@linutronix.de

hostap_get_wireless_stats() is the iw_handler_if::get_wireless_stats()
callback of this driver. This callback was not allowed to sleep until
commit a160ee69 ("wext: let get_wireless_stats() sleep") in v2.6.32.

Remove the therefore pointless in_atomic() check.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Jouni Malinen <j@w1.fi>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: linux-wireless@vger.kernel.org
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201101211536.2966644-6-bigeasy@linutronix.de

issuecommand() is using in_atomic() to decide if it is safe to invoke
schedule() while waiting for the command to be accepted.

Usage of in_atomic() for this is only half correct as it can not detect all
condition where it is not allowed to schedule(). Also Linus clearly
requested that code which changes behaviour depending on context should
either be seperated or the context be conveyed in an argument passed by the
caller, which usually knows the context.

Add an may_sleep argument to issuecommand() indicating when it is save to
sleep and change schedule() to cond_resched() because it's pointless to
invoke schedule() if there is no request to reschedule.

Pass the may_sleep condition through the various call chains leading to
issuecommand().
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: linux-wireless@vger.kernel.org
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201101211536.2966644-5-bigeasy@linutronix.de

issuecommand() is using in_atomic() to decide if it is safe to invoke
schedule() while waiting for the command to be accepted.

Usage of in_atomic() for this is only half correct as it can not detect all
condition where it is not allowed to schedule(). Also Linus clearly
requested that code which changes behaviour depending on context should
either be seperated or the context be conveyed in an argument passed by the
caller, which usually knows the context.

Chasing the call chains leading up to issuecommand() is straight forward,
but airo_link() and airo_get_stats() would require to pass the context
through a quite large amount of functions.

As this is ancient hardware, avoid the churn and enforce the invocation of
those functions through the JOB machinery.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: linux-wireless@vger.kernel.org
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201101211536.2966644-4-bigeasy@linutronix.de

airo_get_wireless_stats() is the iw_handler_if::get_wireless_stats()
callback of this driver. This callback was not allowed to sleep until
commit a160ee69 ("wext: let get_wireless_stats() sleep") in v2.6.32.

airo still delegates the readout to a thread, which is not longer
necessary.

Invoke airo_read_wireless_stats() directly from the callback and remove
the now unused JOB_WSTATS handling.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: linux-wireless@vger.kernel.org
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201101211536.2966644-3-bigeasy@linutronix.de

The usage of in_irq()/in_interrupt() in drivers is phased out and the
BUG_ON()'s based on those are not covering all contexts in which these
functions cannot be called.

Aside of that BUG_ON() should only be used as last resort, which is clearly
not the case here.

A broad variety of checks in the invoked functions (always enabled or debug
option dependent) cover these conditions already, so the BUG_ON()'s do not
really provide additional value.

Just remove them.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: linux-wireless@vger.kernel.org
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201101211536.2966644-2-bigeasy@linutronix.de

Buffalo WI-U3-866D is supported by the rtl8812au driver.
Also RTL8812AU software supports the product RTL8192EU also.
So add Buffalo WI-U3-866D with the RTL8192EU driver info.
Signed-off-by: Tokunori Ikegami <ikegami.t@gmail.com>
Cc: linux-wireless@vger.kernel.org
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201101173236.7851-1-ikegami.t@gmail.com

This patch checks the supported lps deep mode from firmware feature,
and allows different firmware have different deep power mode.
Original module parameter rtw_fw_lps_deep_mode is replaced with
rtw_disable_lps_deep_mode for user to disable lps deep mode.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Tzu-En Huang <tehuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201030084826.9034-5-tehuang@realtek.com

Originally driver checks if firmware has left lps via reading the setting
of REG_TCR register. But this way may fail when firmware is frequently
changing power state. Therefore, firmware provides a safer option for
driver. When firmware leaves lps successfully, it sends a C2H response
to inform driver.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Tzu-En Huang <tehuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201030084826.9034-4-tehuang@realtek.com

Some functions need the support of firmware with special version.
In order to get the feature of current firmware, we store the information
in firmware header and parse after firmware is loaded. The current feature
list in firmware header includes checking leave lps via C2H and
supported lps deep mode.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Tzu-En Huang <tehuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201030084826.9034-3-tehuang@realtek.com

In current flow, driver issues power requests to firmware for entering or
leaving deep power mode. But driver does not wait for an ack from firmware
via reading CPWM register when driver requests to enter deep power mode.
The behavior will lead to unsynchronized state between firmware and driver.
Furthermore, consecutive same power requests may confuse firmware and leads
to unexpected value of CPWM register. This patch ensures that the power
request will wait for an ack from firmware and only send one power request
each time.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Tzu-En Huang <tehuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201030084826.9034-2-tehuang@realtek.com

BT firmware will report BLE-HID and BLE-RCU in different profile.
We can distinguish the two profile from BT info now.

Add the coexistence for BLE-HID coexistence,
it can make BLE HID work more smoothly.

BLE-HID need to Tx/Rx packet more frequently to respond
user operation, but RCU doesn't.

In the case of RCU coexistence, it will make Wi-Fi have a
higher priority to earn more Wi-Fi throughput.

If BLE-HID go for the same case,
it will make user feel mouse is lagging.

Desired BT firmware BT-COEX version: 0x1c
Desired WL firmware version: 9.9
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201030055506.6560-1-pkshih@realtek.com

During realtek USB wireless NIC initialization, it's unexpected
disconnection will cause urb sumbmit fail. On the one hand,
_rtl_usb_cleanup_rx will be called to clean up rx stuff, especially for
rtl_wq. On the other hand, disconnection will cause rtl_usb_disconnect
and _rtl_usb_cleanup_rx to be called. So, rtl_wq will be flush/destroy
twice, which will cause non-canonical address 0xdead000000000122 access
and general protection fault.

Fixed this issue by remove _rtl_usb_cleanup_rx when urb sumbmit fail.
Signed-off-by: WeitaoWangoc <WeitaoWang-oc@zhaoxin.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1603768580-2798-1-git-send-email-WeitaoWang-oc@zhaoxin.com

These full-mac chips use little-endian byte ordering. This patch
adds a few missing conversions to/from little-endian so that the
driver may be used with a big-endian host.
Signed-off-by: Remi Depommier <rde@setrix.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201020174639.28892-1-rde@setrix.com

clang -Wextra warns about functions returning a 'const' integer:

drivers/net/wireless/realtek/rtw88/rtw8822b.c:90:8: warning: 'const' type qualifier on return type has no effect [-Wignored-qualifiers]
static const u8 rtw8822b_get_swing_index(struct rtw_dev *rtwdev)

Remove the extra qualifier here.

Fixes: c97ee3e0 ("rtw88: add power tracking support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201026213040.3889546-7-arnd@kernel.org

There are thousands of warnings in a W=2 build from just one file:

drivers/net/wireless/realtek/rtlwifi/rtl8821ae/table.c:3788:15: warning: pointer targets in initialization of 'u8 *' {aka 'unsigned char *'} from 'char *' differ in signedness [-Wpointer-sign]

Change the types to consistently use 'const char *' for the
strings.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201026213040.3889546-6-arnd@kernel.org

gcc -Wextra complains about the function type cast:

drivers/net/wireless/intersil/hostap/hostap_hw.c:3173:48: warning: cast between incompatible function types from ‘void (*)(struct tasklet_struct *)’ to ‘void (*)(long unsigned int)’ [-Wcast-function-type]

Avoid this by just using the regular tasklet_setup() function instead
of the incorrect homegrown version.

Fixes: 7433c969 ("intersil: convert tasklets to use new tasklet_setup() API")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201026213040.3889546-2-arnd@kernel.org

A break is not needed if it is preceded by a return
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201020125841.26791-1-trix@redhat.com

In case RSI9116 SDIO WiFi operates in STA mode against Intel 9260 in AP mode,
the association fails. The former is using wpa_supplicant during association,
the later is set up using hostapd:

iwl$ cat hostapd.conf
interface=wlp1s0
ssid=test
country_code=DE
hw_mode=g
channel=1
wpa=2
wpa_passphrase=test
wpa_key_mgmt=WPA-PSK
iwl$ hostapd -d hostapd.conf

rsi$ wpa_supplicant -i wlan0 -c <(wpa_passphrase test test)

The problem is that the TX EAPOL data descriptor RSI_DESC_REQUIRE_CFM_TO_HOST
flag and extended descriptor EAPOL4_CONFIRM frame type are not set in case the
AP is iwlwifi, because in that case the TX EAPOL packet is 2 bytes shorter.

The downstream vendor driver has this change in place already [1], however
there is no explanation for it, neither is there any commit history from which
such explanation could be obtained.

[1] https://github.com/SiliconLabs/RS911X-nLink-OSD/blob/master/rsi/rsi_91x_hal.c#L238Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Angus Ainslie <angus@akkea.ca>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Martin Kepplinger <martink@posteo.de>
Cc: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Cc: Siva Rebbagondla <siva8118@gmail.com>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201015111616.429220-1-marex@denx.de