- 25 Apr, 2024 17 commits
-
-
MD Danish Anwar authored
The DP83869 driver sets the MII bit (needed for PHY to work in MII mode) only if the op-mode is either DP83869_100M_MEDIA_CONVERT or DP83869_RGMII_100_BASE. Some drivers i.e. ICSSG support MII mode with op-mode as DP83869_RGMII_COPPER_ETHERNET for which the MII bit is not set in dp83869 driver. As a result MII mode on ICSSG doesn't work and below log is seen. TI DP83869 300b2400.mdio:0f: selected op-mode is not valid with MII mode icssg-prueth icssg1-eth: couldn't connect to phy ethernet-phy@0 icssg-prueth icssg1-eth: can't phy connect port MII0 Fix this by setting MII bit for DP83869_RGMII_COPPER_ETHERNET op-mode as well. Fixes: 94e86ef1 ("net: phy: dp83869: support mii mode when rgmii strap cfg is used") Signed-off-by:
MD Danish Anwar <danishanwar@ti.com> Reviewed-by:
Ravi Gunasekaran <r-gunasekaran@ti.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetoothJakub Kicinski authored
Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - qca: set power_ctrl_enabled on NULL returned by gpiod_get_optional() - hci_sync: Using hci_cmd_sync_submit when removing Adv Monitor - qca: fix invalid device address check - hci_sync: Use advertised PHYs on hci_le_ext_create_conn_sync - Fix type of len in {l2cap,sco}_sock_getsockopt_old() - btusb: mediatek: Fix double free of skb in coredump - btusb: Add Realtek RTL8852BE support ID 0x0bda:0x4853 - btusb: Fix triggering coredump implementation for QCA * tag 'for-net-2024-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: qca: set power_ctrl_enabled on NULL returned by gpiod_get_optional() Bluetooth: hci_sync: Using hci_cmd_sync_submit when removing Adv Monitor Bluetooth: qca: fix NULL-deref on non-serdev setup Bluetooth: qca: fix NULL-deref on non-serdev suspend Bluetooth: btusb: mediatek: Fix double free of skb in coredump Bluetooth: MGMT: Fix failing to MGMT_OP_ADD_UUID/MGMT_OP_REMOVE_UUID Bluetooth: qca: fix invalid device address check Bluetooth: hci_event: Fix sending HCI_OP_READ_ENC_KEY_SIZE Bluetooth: btusb: Fix triggering coredump implementation for QCA Bluetooth: btusb: Add Realtek RTL8852BE support ID 0x0bda:0x4853 Bluetooth: hci_sync: Use advertised PHYs on hci_le_ext_create_conn_sync Bluetooth: Fix type of len in {l2cap,sco}_sock_getsockopt_old() ==================== Link: https://lore.kernel.org/r/20240424204102.2319483-1-luiz.dentz@gmail.comSigned-off-by:Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
I added OOM and netpoll discard counters, naively assuming that the cpr pointer is pointing to a common completion ring. Turns out that is usually *a* completion ring but not *the* completion ring which bnapi->cp_ring points to. bnapi->cp_ring is where the stats are read from, so we end up reporting 0 thru ethtool -S and qstat even though the drop events have happened. Make 100% sure we're recording statistics in the correct structure. Fixes: 907fd4a2 ("bnxt: count discards due to memory allocation errors") Reviewed-by:
Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20240424002148.3937059-1-kuba@kernel.orgSigned-off-by:
-
Lukas Wunner authored
Roman reports a deadlock on unplug of a Thunderbolt docking station containing an Intel I225 Ethernet adapter. The root cause is that led_classdev's for LEDs on the adapter are registered such that they're device-managed by the netdev. That results in recursive acquisition of the rtnl_lock() mutex on unplug: When the driver calls unregister_netdev(), it acquires rtnl_lock(), then frees the device-managed resources. Upon unregistering the LEDs, netdev_trig_deactivate() invokes unregister_netdevice_notifier(), which tries to acquire rtnl_lock() again. Avoid by using non-device-managed LED registration. Stack trace for posterity: schedule+0x6e/0xf0 schedule_preempt_disabled+0x15/0x20 __mutex_lock+0x2a0/0x750 unregister_netdevice_notifier+0x40/0x150 netdev_trig_deactivate+0x1f/0x60 [ledtrig_netdev] led_trigger_set+0x102/0x330 led_classdev_unregister+0x4b/0x110 release_nodes+0x3d/0xb0 devres_release_all+0x8b/0xc0 device_del+0x34f/0x3c0 unregister_netdevice_many_notify+0x80b/0xaf0 unregister_netdev+0x7c/0xd0 igc_remove+0xd8/0x1e0 [igc] pci_device_remove+0x3f/0xb0 Fixes: ea578703 ("igc: Add support for LEDs on i225/i226") Reported-by:
Roman Lozko <lozko.roma@gmail.com> Closes: https://lore.kernel.org/r/CAEhC_B=ksywxCG_+aQqXUrGEgKq+4mqnSV8EBHOKbC3-Obj9+Q@mail.gmail.com/Reported-by:
"Marek Marczykowski-Górecki" <marmarek@invisiblethingslab.com> Closes: https://lore.kernel.org/r/ZhRD3cOtz5i-61PB@mail-itl/Signed-off-by:
Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by:
Lukas Wunner <lukas@wunner.de> Cc: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by:
Simon Horman <horms@kernel.org> Reviewed-by:
Naama Meir <naamax.meir@linux.intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20240422204503.225448-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Duanqiang Wen authored
This reverts commit e30cef00. commit 99f4570c ("clkdev: Update clkdev id usage to allow for longer names") can fix clk_name exceed MAX_DEV_ID limits, so this commit is meaningless. Signed-off-by:
Duanqiang Wen <duanqiangwen@net-swift.com> Reviewed-by:
Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240422084109.3201-2-duanqiangwen@net-swift.comSigned-off-by:
-
Duanqiang Wen authored
This reverts commit c644920c. when register i2c dev, txgbe shorten "i2c_designware" to "i2c_dw", will cause this i2c dev can't match platfom driver i2c_designware_platform. Signed-off-by:
-
Jakub Kicinski authored
Petr Machata says: ==================== mlxsw: Various ACL fixes Ido Schimmel writes: Fix various problems in the ACL (i.e., flower offload) code. See the commit messages for more details. ==================== Link: https://lore.kernel.org/r/cover.1713797103.git.petrm@nvidia.comSigned-off-by:
-
Ido Schimmel authored
The rehash delayed work is rescheduled with a delay if the number of credits at end of the work is not negative as supposedly it means that the migration ended. Otherwise, it is rescheduled immediately. After "mlxsw: spectrum_acl_tcam: Fix possible use-after-free during rehash" the above is no longer accurate as a non-negative number of credits is no longer indicative of the migration being done. It can also happen if the work encountered an error in which case the migration will resume the next time the work is scheduled. The significance of the above is that it is possible for the work to be pending and associated with hints that were allocated when the migration started. This leads to the hints being leaked [1] when the work is canceled while pending as part of ACL region dismantle. Fix by freeing the hints if hints are associated with a work that was canceled while pending. Blame the original commit since the reliance on not having a pending work associated with hints is fragile. [1] unreferenced object 0xffff88810e7c3000 (size 256): comm "kworker/0:16", pid 176, jiffies 4295460353 hex dump (first 32 bytes): 00 30 95 11 81 88 ff ff 61 00 00 00 00 00 00 80 .0......a....... 00 00 61 00 40 00 00 00 00 00 00 00 04 00 00 00 ..a.@........... backtrace (crc 2544ddb9): [<00000000cf8cfab3>] kmalloc_trace+0x23f/0x2a0 [<000000004d9a1ad9>] objagg_hints_get+0x42/0x390 [<000000000b143cf3>] mlxsw_sp_acl_erp_rehash_hints_get+0xca/0x400 [<0000000059bdb60a>] mlxsw_sp_acl_tcam_vregion_rehash_work+0x868/0x1160 [<00000000e81fd734>] process_one_work+0x59c/0xf20 [<00000000ceee9e81>] worker_thread+0x799/0x12c0 [<00000000bda6fe39>] kthread+0x246/0x300 [<0000000070056d23>] ret_from_fork+0x34/0x70 [<00000000dea2b93e>] ret_from_fork_asm+0x1a/0x30 Fixes: c9c9af91 ("mlxsw: spectrum_acl: Allow to interrupt/continue rehash work") Signed-off-by:Ido Schimmel <idosch@nvidia.com> Tested-by:
Alexander Zubkov <green@qrator.net> Signed-off-by:
Petr Machata <petrm@nvidia.com> Reviewed-by:
-
Ido Schimmel authored
Both the function that migrates all the chunks within a region and the function that migrates all the entries within a chunk call list_first_entry() on the respective lists without checking that the lists are not empty. This is incorrect usage of the API, which leads to the following warning [1]. Fix by returning if the lists are empty as there is nothing to migrate in this case. [1] WARNING: CPU: 0 PID: 6437 at drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_tcam.c:1266 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x1f1/0> Modules linked in: CPU: 0 PID: 6437 Comm: kworker/0:37 Not tainted 6.9.0-rc3-custom-00883-g94a65f079ef6 #39 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work RIP: 0010:mlxsw_sp_acl_tcam_vchunk_migrate_all+0x1f1/0x2c0 [...] Call Trace: <TASK> mlxsw_sp_acl_tcam_vregion_rehash_work+0x6c/0x4a0 process_one_work+0x151/0x370 worker_thread+0x2cb/0x3e0 kthread+0xd0/0x100 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1a/0x30 </TASK> Fixes: 6f9579d4 ("mlxsw: spectrum_acl: Remember where to continue rehash migration") Signed-off-by:
-
Ido Schimmel authored
As previously explained, the rehash delayed work migrates filters from one region to another. This is done by iterating over all chunks (all the filters with the same priority) in the region and in each chunk iterating over all the filters. When the work runs out of credits it stores the current chunk and entry as markers in the per-work context so that it would know where to resume the migration from the next time the work is scheduled. Upon error, the chunk marker is reset to NULL, but without resetting the entry markers despite being relative to it. This can result in migration being resumed from an entry that does not belong to the chunk being migrated. In turn, this will eventually lead to a chunk being iterated over as if it is an entry. Because of how the two structures happen to be defined, this does not lead to KASAN splats, but to warnings such as [1]. Fix by creating a helper that resets all the markers and call it from all the places the currently only reset the chunk marker. For good measures also call it when starting a completely new rehash. Add a warning to avoid future cases. [1] WARNING: CPU: 7 PID: 1076 at drivers/net/ethernet/mellanox/mlxsw/core_acl_flex_keys.c:407 mlxsw_afk_encode+0x242/0x2f0 Modules linked in: CPU: 7 PID: 1076 Comm: kworker/7:24 Tainted: G W 6.9.0-rc3-custom-00880-g29e61d91b77b #29 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work RIP: 0010:mlxsw_afk_encode+0x242/0x2f0 [...] Call Trace: <TASK> mlxsw_sp_acl_atcam_entry_add+0xd9/0x3c0 mlxsw_sp_acl_tcam_entry_create+0x5e/0xa0 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x109/0x290 mlxsw_sp_acl_tcam_vregion_rehash_work+0x6c/0x470 process_one_work+0x151/0x370 worker_thread+0x2cb/0x3e0 kthread+0xd0/0x100 ret_from_fork+0x34/0x50 </TASK> Fixes: 6f9579d4 ("mlxsw: spectrum_acl: Remember where to continue rehash migration") Signed-off-by:
-
Ido Schimmel authored
The rehash delayed work migrates filters from one region to another. This is done by iterating over all chunks (all the filters with the same priority) in the region and in each chunk iterating over all the filters. If the migration fails, the code tries to migrate the filters back to the old region. However, the rollback itself can also fail in which case another migration will be erroneously performed. Besides the fact that this ping pong is not a very good idea, it also creates a problem. Each virtual chunk references two chunks: The currently used one ('vchunk->chunk') and a backup ('vchunk->chunk2'). During migration the first holds the chunk we want to migrate filters to and the second holds the chunk we are migrating filters from. The code currently assumes - but does not verify - that the backup chunk does not exist (NULL) if the currently used chunk does not reference the target region. This assumption breaks when we are trying to rollback a rollback, resulting in the backup chunk being overwritten and leaked [1]. Fix by not rolling back a failed rollback and add a warning to avoid future cases. [1] WARNING: CPU: 5 PID: 1063 at lib/parman.c:291 parman_destroy+0x17/0x20 Modules linked in: CPU: 5 PID: 1063 Comm: kworker/5:11 Tainted: G W 6.9.0-rc2-custom-00784-gc6a05c468a0b #14 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work RIP: 0010:parman_destroy+0x17/0x20 [...] Call Trace: <TASK> mlxsw_sp_acl_atcam_region_fini+0x19/0x60 mlxsw_sp_acl_tcam_region_destroy+0x49/0xf0 mlxsw_sp_acl_tcam_vregion_rehash_work+0x1f1/0x470 process_one_work+0x151/0x370 worker_thread+0x2cb/0x3e0 kthread+0xd0/0x100 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1a/0x30 </TASK> Fixes: 84350051 ("mlxsw: spectrum_acl: Do rollback as another call to mlxsw_sp_acl_tcam_vchunk_migrate_all()") Signed-off-by: -
Ido Schimmel authored
In the rare cases when the device resources are exhausted it is likely that the rehash delayed work will fail. An error message will be printed whenever this happens which can be overwhelming considering the fact that the work is per-region and that there can be hundreds of regions. Fix by rate limiting the error message. Fixes: e5e7962e ("mlxsw: spectrum_acl: Implement region migration according to hints") Signed-off-by:
-
Ido Schimmel authored
The rehash delayed work migrates filters from one region to another according to the number of available credits. The migrated from region is destroyed at the end of the work if the number of credits is non-negative as the assumption is that this is indicative of migration being complete. This assumption is incorrect as a non-negative number of credits can also be the result of a failed migration. The destruction of a region that still has filters referencing it can result in a use-after-free [1]. Fix by not destroying the region if migration failed. [1] BUG: KASAN: slab-use-after-free in mlxsw_sp_acl_ctcam_region_entry_remove+0x21d/0x230 Read of size 8 at addr ffff8881735319e8 by task kworker/0:31/3858 CPU: 0 PID: 3858 Comm: kworker/0:31 Tainted: G W 6.9.0-rc2-custom-00782-gf2275c2157d8 #5 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work Call Trace: <TASK> dump_stack_lvl+0xc6/0x120 print_report+0xce/0x670 kasan_report+0xd7/0x110 mlxsw_sp_acl_ctcam_region_entry_remove+0x21d/0x230 mlxsw_sp_acl_ctcam_entry_del+0x2e/0x70 mlxsw_sp_acl_atcam_entry_del+0x81/0x210 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x3cd/0xb50 mlxsw_sp_acl_tcam_vregion_rehash_work+0x157/0x1300 process_one_work+0x8eb/0x19b0 worker_thread+0x6c9/0xf70 kthread+0x2c9/0x3b0 ret_from_fork+0x4d/0x80 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 174: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x8f/0xa0 __kmalloc+0x19c/0x360 mlxsw_sp_acl_tcam_region_create+0xdf/0x9c0 mlxsw_sp_acl_tcam_vregion_rehash_work+0x954/0x1300 process_one_work+0x8eb/0x19b0 worker_thread+0x6c9/0xf70 kthread+0x2c9/0x3b0 ret_from_fork+0x4d/0x80 ret_from_fork_asm+0x1a/0x30 Freed by task 7: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 poison_slab_object+0x102/0x170 __kasan_slab_free+0x14/0x30 kfree+0xc1/0x290 mlxsw_sp_acl_tcam_region_destroy+0x272/0x310 mlxsw_sp_acl_tcam_vregion_rehash_work+0x731/0x1300 process_one_work+0x8eb/0x19b0 worker_thread+0x6c9/0xf70 kthread+0x2c9/0x3b0 ret_from_fork+0x4d/0x80 ret_from_fork_asm+0x1a/0x30 Fixes: c9c9af91 ("mlxsw: spectrum_acl: Allow to interrupt/continue rehash work") Signed-off-by:
-
Ido Schimmel authored
The rule activity update delayed work periodically traverses the list of configured rules and queries their activity from the device. As part of this task it accesses the entry pointed by 'ventry->entry', but this entry can be changed concurrently by the rehash delayed work, leading to a use-after-free [1]. Fix by closing the race and perform the activity query under the 'vregion->lock' mutex. [1] BUG: KASAN: slab-use-after-free in mlxsw_sp_acl_tcam_flower_rule_activity_get+0x121/0x140 Read of size 8 at addr ffff8881054ed808 by task kworker/0:18/181 CPU: 0 PID: 181 Comm: kworker/0:18 Not tainted 6.9.0-rc2-custom-00781-gd5ab772d32f7 #2 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_rule_activity_update_work Call Trace: <TASK> dump_stack_lvl+0xc6/0x120 print_report+0xce/0x670 kasan_report+0xd7/0x110 mlxsw_sp_acl_tcam_flower_rule_activity_get+0x121/0x140 mlxsw_sp_acl_rule_activity_update_work+0x219/0x400 process_one_work+0x8eb/0x19b0 worker_thread+0x6c9/0xf70 kthread+0x2c9/0x3b0 ret_from_fork+0x4d/0x80 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 1039: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x8f/0xa0 __kmalloc+0x19c/0x360 mlxsw_sp_acl_tcam_entry_create+0x7b/0x1f0 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x30d/0xb50 mlxsw_sp_acl_tcam_vregion_rehash_work+0x157/0x1300 process_one_work+0x8eb/0x19b0 worker_thread+0x6c9/0xf70 kthread+0x2c9/0x3b0 ret_from_fork+0x4d/0x80 ret_from_fork_asm+0x1a/0x30 Freed by task 1039: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 poison_slab_object+0x102/0x170 __kasan_slab_free+0x14/0x30 kfree+0xc1/0x290 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x3d7/0xb50 mlxsw_sp_acl_tcam_vregion_rehash_work+0x157/0x1300 process_one_work+0x8eb/0x19b0 worker_thread+0x6c9/0xf70 kthread+0x2c9/0x3b0 ret_from_fork+0x4d/0x80 ret_from_fork_asm+0x1a/0x30 Fixes: 2bffc532 ("mlxsw: spectrum_acl: Don't take mutex in mlxsw_sp_acl_tcam_vregion_rehash_work()") Signed-off-by:
-
Ido Schimmel authored
The purpose of the rehash delayed work is to reduce the number of masks (eRPs) used by an ACL region as the eRP bank is a global and limited resource. This is done in three steps: 1. Creating a new set of masks and a new ACL region which will use the new masks and to which the existing filters will be migrated to. The new region is assigned to 'vregion->region' and the region from which the filters are migrated from is assigned to 'vregion->region2'. 2. Migrating all the filters from the old region to the new region. 3. Destroying the old region and setting 'vregion->region2' to NULL. Only the second steps is performed under the 'vregion->lock' mutex although its comments says that among other things it "Protects consistency of region, region2 pointers". This is problematic as the first step can race with filter insertion from user space that uses 'vregion->region', but under the mutex. Fix by holding the mutex across the entirety of the delayed work and not only during the second step. Fixes: 2bffc532 ("mlxsw: spectrum_acl: Don't take mutex in mlxsw_sp_acl_tcam_vregion_rehash_work()") Signed-off-by:
-
Ido Schimmel authored
Region identifiers can be allocated both when user space tries to insert a new tc filter and when filters are migrated from one region to another as part of the rehash delayed work. There is no lock protecting the bitmap from which these identifiers are allocated from, which is racy and leads to bad parameter errors from the device's firmware. Fix by converting the bitmap to IDA which handles its own locking. For consistency, do the same for the group identifiers that are part of the same structure. Fixes: 2bffc532 ("mlxsw: spectrum_acl: Don't take mutex in mlxsw_sp_acl_tcam_vregion_rehash_work()") Reported-by:
Amit Cohen <amcohen@nvidia.com> Signed-off-by:
-
Hyunwoo Kim authored
Since kfree_rcu, which is called in the hlist_for_each_entry_rcu traversal of ovs_ct_limit_exit, is not part of the RCU read critical section, it is possible that the RCU grace period will pass during the traversal and the key will be free. To prevent this, it should be changed to hlist_for_each_entry_safe. Fixes: 11efd5cb ("openvswitch: Support conntrack zone limit") Signed-off-by:
Hyunwoo Kim <v4bel@theori.io> Reviewed-by:
Eric Dumazet <edumazet@google.com> Reviewed-by:
Aaron Conole <aconole@redhat.com> Link: https://lore.kernel.org/r/ZiYvzQN/Ry5oeFQW@v4bel-B760M-AORUS-ELITE-AXSigned-off-by:
-
- 24 Apr, 2024 18 commits
-
-
Bartosz Golaszewski authored
Any return value from gpiod_get_optional() other than a pointer to a GPIO descriptor or a NULL-pointer is an error and the driver should abort probing. That being said: commit 56d074d2 ("Bluetooth: hci_qca: don't use IS_ERR_OR_NULL() with gpiod_get_optional()") no longer sets power_ctrl_enabled on NULL-pointer returned by devm_gpiod_get_optional(). Restore this behavior but bail-out on errors. While at it: also bail-out on error returned when trying to get the "swctrl" GPIO. Reported-by:
Wren Turkal <wt@penguintechs.org> Reported-by:
Zijun Hu <quic_zijuhu@quicinc.com> Closes: https://lore.kernel.org/linux-bluetooth/1713449192-25926-2-git-send-email-quic_zijuhu@quicinc.com/ Fixes: 56d074d2 ("Bluetooth: hci_qca: don't use IS_ERR_OR_NULL() with gpiod_get_optional()") Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Tested-by:
Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-
Chun-Yi Lee authored
Since the d883a466 be introduced in v6.4, bluetooth daemon got the following failed message of MGMT_OP_REMOVE_ADV_MONITOR command when controller is power-off: bluetoothd[20976]: src/adapter.c:reset_adv_monitors_complete() Failed to reset Adv Monitors: Failed> Normally this situation is happened when the bluetoothd deamon be started manually after system booting. Which means that bluetoothd received MGMT_EV_INDEX_ADDED event after kernel runs hci_power_off(). Base on doc/mgmt-api.txt, the MGMT_OP_REMOVE_ADV_MONITOR command can be used when the controller is not powered. This patch changes the code in remove_adv_monitor() to use hci_cmd_sync_submit() instead of hci_cmd_sync_queue(). Fixes: d883a466 ("Bluetooth: hci_sync: Only allow hci_cmd_sync_queue if running") Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Cc: Manish Mandlik <mmandlik@google.com> Cc: Archie Pusaka <apusaka@chromium.org> Cc: Miao-chen Chou <mcchou@chromium.org> Signed-off-by:
Chun-Yi Lee <jlee@suse.com> Signed-off-by:
-
Johan Hovold authored
Qualcomm ROME controllers can be registered from the Bluetooth line discipline and in this case the HCI UART serdev pointer is NULL. Add the missing sanity check to prevent a NULL-pointer dereference when setup() is called for a non-serdev controller. Fixes: e9b3e5b8 ("Bluetooth: hci_qca: only assign wakeup with serial port support") Cc: stable@vger.kernel.org # 6.2 Cc: Zhengping Jiang <jiangzp@google.com> Signed-off-by:
Johan Hovold <johan+linaro@kernel.org> Signed-off-by:
-
Johan Hovold authored
Qualcomm ROME controllers can be registered from the Bluetooth line discipline and in this case the HCI UART serdev pointer is NULL. Add the missing sanity check to prevent a NULL-pointer dereference when wakeup() is called for a non-serdev controller during suspend. Just return true for now to restore the original behaviour and address the crash with pre-6.2 kernels, which do not have commit e9b3e5b8 ("Bluetooth: hci_qca: only assign wakeup with serial port support") that causes the crash to happen already at setup() time. Fixes: c1a74160 ("Bluetooth: hci_qca: Add device_may_wakeup support") Cc: stable@vger.kernel.org # 5.13 Signed-off-by:
-
Sean Wang authored
hci_devcd_append() would free the skb on error so the caller don't have to free it again otherwise it would cause the double free of skb. Fixes: 0b701513 ("Bluetooth: btusb: mediatek: add MediaTek devcoredump support") Reported-by : Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by:
Sean Wang <sean.wang@mediatek.com> Signed-off-by:
-
Luiz Augusto von Dentz authored
These commands don't require the adapter to be up and running so don't use hci_cmd_sync_queue which would check that flag, instead use hci_cmd_sync_submit which would ensure mgmt_class_complete is set properly regardless if any command was actually run or not. Link: https://github.com/bluez/bluez/issues/809 Fixes: d883a466 ("Bluetooth: hci_sync: Only allow hci_cmd_sync_queue if running") Signed-off-by:
-
Johan Hovold authored
Qualcomm Bluetooth controllers may not have been provisioned with a valid device address and instead end up using the default address 00:00:00:00:5a:ad. This was previously believed to be due to lack of persistent storage for the address but it may also be due to integrators opting to not use the on-chip OTP memory and instead store the address elsewhere (e.g. in storage managed by secure world firmware). According to Qualcomm, at least WCN6750, WCN6855 and WCN7850 have on-chip OTP storage for the address. As the device type alone cannot be used to determine when the address is valid, instead read back the address during setup() and only set the HCI_QUIRK_USE_BDADDR_PROPERTY flag when needed. This specifically makes sure that controllers that have been provisioned with an address do not start as unconfigured. Reported-by:
Janaki Ramaiah Thota <quic_janathot@quicinc.com> Link: https://lore.kernel.org/r/124a7d54-5a18-4be7-9a76-a12017f6cce5@quicinc.com/ Fixes: 5971752d ("Bluetooth: hci_qca: Set HCI_QUIRK_USE_BDADDR_PROPERTY for wcn3990") Fixes: e668eb1e ("Bluetooth: hci_core: Don't stop BT if the BD address missing in dts") Fixes: 6945795b ("Bluetooth: fix use-bdaddr-property quirk") Cc: stable@vger.kernel.org # 6.5 Cc: Matthias Kaehlcke <mka@chromium.org> Signed-off-by:
-
Luiz Augusto von Dentz authored
The code shall always check if HCI_QUIRK_BROKEN_READ_ENC_KEY_SIZE has been set before attempting to use HCI_OP_READ_ENC_KEY_SIZE. Fixes: c569242c ("Bluetooth: hci_event: set the conn encrypted before conn establishes") Signed-off-by:
-
Zijun Hu authored
btusb_coredump_qca() uses __hci_cmd_sync() to send a vendor-specific command to trigger firmware coredump, but the command does not have any event as its sync response, so it is not suitable to use __hci_cmd_sync(), fixed by using __hci_cmd_send(). Fixes: 20981ce2 ("Bluetooth: btusb: Add WCN6855 devcoredump support") Signed-off-by:
-
WangYuli authored
Add the support ID(0x0bda, 0x4853) to usb_device_id table for Realtek RTL8852BE. Without this change the device utilizes an obsolete version of the firmware that is encoded in it rather than the updated Realtek firmware and config files from the firmware directory. The latter files implement many new features. The device table is as follows: T: Bus=03 Lev=01 Prnt=01 Port=09 Cnt=03 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0bda ProdID=4853 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Cc: stable@vger.kernel.org Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
WangYuli <wangyuli@uniontech.com> Signed-off-by:
-
Luiz Augusto von Dentz authored
The extended advertising reports do report the PHYs so this store then in hci_conn so it can be later used in hci_le_ext_create_conn_sync to narrow the PHYs to be scanned since the controller will also perform a scan having a smaller set of PHYs shall reduce the time it takes to find and connect peers. Fixes: 288c9022 ("Bluetooth: Enable all supported LE PHY by default") Signed-off-by:
-
Nathan Chancellor authored
After an innocuous optimization change in LLVM main (19.0.0), x86_64 allmodconfig (which enables CONFIG_KCSAN / -fsanitize=thread) fails to build due to the checks in check_copy_size(): In file included from net/bluetooth/sco.c:27: In file included from include/linux/module.h:13: In file included from include/linux/stat.h:19: In file included from include/linux/time.h:60: In file included from include/linux/time32.h:13: In file included from include/linux/timex.h:67: In file included from arch/x86/include/asm/timex.h:6: In file included from arch/x86/include/asm/tsc.h:10: In file included from arch/x86/include/asm/msr.h:15: In file included from include/linux/percpu.h:7: In file included from include/linux/smp.h:118: include/linux/thread_info.h:244:4: error: call to '__bad_copy_from' declared with 'error' attribute: copy source size is too small 244 | __bad_copy_from(); | ^ The same exact error occurs in l2cap_sock.c. The copy_to_user() statements that are failing come from l2cap_sock_getsockopt_old() and sco_sock_getsockopt_old(). This does not occur with GCC with or without KCSAN or Clang without KCSAN enabled. len is defined as an 'int' because it is assigned from '__user int *optlen'. However, it is clamped against the result of sizeof(), which has a type of 'size_t' ('unsigned long' for 64-bit platforms). This is done with min_t() because min() requires compatible types, which results in both len and the result of sizeof() being casted to 'unsigned int', meaning len changes signs and the result of sizeof() is truncated. From there, len is passed to copy_to_user(), which has a third parameter type of 'unsigned long', so it is widened and changes signs again. This excessive casting in combination with the KCSAN instrumentation causes LLVM to fail to eliminate the __bad_copy_from() call, failing the build. The official recommendation from LLVM developers is to consistently use long types for all size variables to avoid the unnecessary casting in the first place. Change the type of len to size_t in both l2cap_sock_getsockopt_old() and sco_sock_getsockopt_old(). This clears up the error while allowing min_t() to be replaced with min(), resulting in simpler code with no casts and fewer implicit conversions. While len is a different type than optlen now, it should result in no functional change because the result of sizeof() will clamp all values of optlen in the same manner as before. Cc: stable@vger.kernel.org Closes: https://github.com/ClangBuiltLinux/linux/issues/2007 Link: https://github.com/llvm/llvm-project/issues/85647Signed-off-by:Nathan Chancellor <nathan@kernel.org> Reviewed-by:
Justin Stitt <justinstitt@google.com> Signed-off-by:
-
Daniel Golle authored
Only blink if the link is up on a LED which is programmed to also indicate link-status. Otherwise, if both LEDs are in use to indicate different speeds, the resulting blinking being inverted on LEDs which aren't switched on at a specific speed is quite counter-intuitive. Also make sure that state left behind by reset or the bootloader is recognized correctly including the half-duplex and full-duplex bits as well as the (unsupported by Linux netdev trigger semantics) link-down bit. Fixes: c66937b0 ("net: phy: mediatek-ge-soc: support PHY LEDs") Signed-off-by:
Daniel Golle <daniel@makrotopia.org> Signed-off-by:
-
Hyunwoo Kim authored
Since call_rcu, which is called in the hlist_for_each_entry_rcu traversal of gtp_dellink, is not part of the RCU read critical section, it is possible that the RCU grace period will pass during the traversal and the key will be free. To prevent this, it should be changed to hlist_for_each_entry_safe. Fixes: 94dc550a ("gtp: fix an use-after-free in ipv4_pdp_find()") Signed-off-by:
-
Hyunwoo Kim authored
Since call_rcu, which is called in the hlist_for_each_entry_rcu traversal of tcp_ao_connect_init, is not part of the RCU read critical section, it is possible that the RCU grace period will pass during the traversal and the key will be free. To prevent this, it should be changed to hlist_for_each_entry_safe. Fixes: 7c2ffaf2 ("net/tcp: Calculate TCP-AO traffic keys") Signed-off-by:
Dmitry Safonov <0x7f454c46@gmail.com> Link: https://lore.kernel.org/r/ZiYu9NJ/ClR8uSkH@v4bel-B760M-AORUS-ELITE-AXSigned-off-by:
-
Eric Dumazet authored
Some usb drivers try to set small skb->truesize and break core networking stacks. In this patch, I removed one of the skb->truesize overide. I also replaced one skb_clone() by an allocation of a fresh and small skb, to get minimally sized skbs, like we did in commit 1e2c6117 ("net: cdc_ncm: reduce skb truesize in rx path") Fixes: f8ebb3ac ("net: usb: ax88179_178a: Fix packet receiving") Reported-by:
shironeko <shironeko@tesaguri.club> Closes: https://lore.kernel.org/netdev/c110f41a0d2776b525930f213ca9715c@tesaguri.club/Signed-off-by:
-
Eric Dumazet authored
syzbot was able to trigger a NULL deref in fib_validate_source() in an old tree [1]. It appears the bug exists in latest trees. All calls to __in_dev_get_rcu() must be checked for a NULL result. [1] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 2 PID: 3257 Comm: syz-executor.3 Not tainted 5.10.0-syzkaller #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:fib_validate_source+0xbf/0x15a0 net/ipv4/fib_frontend.c:425 Code: 18 f2 f2 f2 f2 42 c7 44 20 23 f3 f3 f3 f3 48 89 44 24 78 42 c6 44 20 27 f3 e8 5d 88 48 fc 4c 89 e8 48 c1 e8 03 48 89 44 24 18 <42> 80 3c 20 00 74 08 4c 89 ef e8 d2 15 98 fc 48 89 5c 24 10 41 bf RSP: 0018:ffffc900015fee40 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff88800f7a4000 RCX: ffff88800f4f90c0 RDX: 0000000000000000 RSI: 0000000004001eac RDI: ffff8880160c64c0 RBP: ffffc900015ff060 R08: 0000000000000000 R09: ffff88800f7a4000 R10: 0000000000000002 R11: ffff88800f4f90c0 R12: dffffc0000000000 R13: 0000000000000000 R14: 0000000000000000 R15: ffff88800f7a4000 FS: 00007f938acfe6c0(0000) GS:ffff888058c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f938acddd58 CR3: 000000001248e000 CR4: 0000000000352ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ip_route_use_hint+0x410/0x9b0 net/ipv4/route.c:2231 ip_rcv_finish_core+0x2c4/0x1a30 net/ipv4/ip_input.c:327 ip_list_rcv_finish net/ipv4/ip_input.c:612 [inline] ip_sublist_rcv+0x3ed/0xe50 net/ipv4/ip_input.c:638 ip_list_rcv+0x422/0x470 net/ipv4/ip_input.c:673 __netif_receive_skb_list_ptype net/core/dev.c:5572 [inline] __netif_receive_skb_list_core+0x6b1/0x890 net/core/dev.c:5620 __netif_receive_skb_list net/core/dev.c:5672 [inline] netif_receive_skb_list_internal+0x9f9/0xdc0 net/core/dev.c:5764 netif_receive_skb_list+0x55/0x3e0 net/core/dev.c:5816 xdp_recv_frames net/bpf/test_run.c:257 [inline] xdp_test_run_batch net/bpf/test_run.c:335 [inline] bpf_test_run_xdp_live+0x1818/0x1d00 net/bpf/test_run.c:363 bpf_prog_test_run_xdp+0x81f/0x1170 net/bpf/test_run.c:1376 bpf_prog_test_run+0x349/0x3c0 kernel/bpf/syscall.c:3736 __sys_bpf+0x45c/0x710 kernel/bpf/syscall.c:5115 __do_sys_bpf kernel/bpf/syscall.c:5201 [inline] __se_sys_bpf kernel/bpf/syscall.c:5199 [inline] __x64_sys_bpf+0x7c/0x90 kernel/bpf/syscall.c:5199 Fixes: 02b24941 ("ipv4: use dst hint for ipv4 list receive") Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/20240421184326.1704930-1-edumazet@google.comSigned-off-by:
-
Eric Dumazet authored
Jonathan Heathcote reported a regression caused by blamed commit on aarch64 architecture. x86 happens to have irq-safe __this_cpu_add_return() and __this_cpu_sub(), but this is not generic. I think my confusion came from "struct sock" argument, because these helpers are called with a locked socket. But the memory accounting is per-proto (and per-cpu after the blamed commit). We might cleanup these helpers later to directly accept a "struct proto *proto" argument. Switch to this_cpu_add_return() and this_cpu_xchg() operations, and get rid of preempt_disable()/preempt_enable() pairs. Fast path becomes a bit faster as a result :) Many thanks to Jonathan Heathcote for his awesome report and investigations. Fixes: 3cd3399d ("net: implement per-cpu reserves for memory_allocated") Reported-by:
Jonathan Heathcote <jonathan.heathcote@bbc.co.uk> Closes: https://lore.kernel.org/netdev/VI1PR01MB42407D7947B2EA448F1E04EFD10D2@VI1PR01MB4240.eurprd01.prod.exchangelabs.com/Signed-off-by:
Soheil Hassas Yeganeh <soheil@google.com> Reviewed-by:
Shakeel Butt <shakeel.butt@linux.dev> Link: https://lore.kernel.org/r/20240421175248.1692552-1-edumazet@google.comSigned-off-by:
-
- 23 Apr, 2024 2 commits
-
-
Jakub Kicinski authored
NLMSG_DONE contains an error code, it has to be extracted. Prior to this change all dumps will end in success, and in case of failure the result is silently truncated. Fixes: e4b48ed4 ("tools: ynl: add a completely generic client") Signed-off-by:
Donald Hunter <donald.hunter@gmail.com> Link: https://lore.kernel.org/r/20240420020827.3288615-1-kuba@kernel.orgSigned-off-by:
-
Duoming Zhou authored
The dev_tracker is added to ax25_cb in ax25_bind(). When the ax25 device is detaching, the dev_tracker of ax25_cb should be deallocated in ax25_kill_by_device() instead of the dev_tracker of ax25_dev. The log reported by ref_tracker is shown below: [ 80.884935] ref_tracker: reference already released. [ 80.885150] ref_tracker: allocated in: [ 80.885349] ax25_dev_device_up+0x105/0x540 [ 80.885730] ax25_device_event+0xa4/0x420 [ 80.885730] notifier_call_chain+0xc9/0x1e0 [ 80.885730] __dev_notify_flags+0x138/0x280 [ 80.885730] dev_change_flags+0xd7/0x180 [ 80.885730] dev_ifsioc+0x6a9/0xa30 [ 80.885730] dev_ioctl+0x4d8/0xd90 [ 80.885730] sock_do_ioctl+0x1c2/0x2d0 [ 80.885730] sock_ioctl+0x38b/0x4f0 [ 80.885730] __se_sys_ioctl+0xad/0xf0 [ 80.885730] do_syscall_64+0xc4/0x1b0 [ 80.885730] entry_SYSCALL_64_after_hwframe+0x67/0x6f [ 80.885730] ref_tracker: freed in: [ 80.885730] ax25_device_event+0x272/0x420 [ 80.885730] notifier_call_chain+0xc9/0x1e0 [ 80.885730] dev_close_many+0x272/0x370 [ 80.885730] unregister_netdevice_many_notify+0x3b5/0x1180 [ 80.885730] unregister_netdev+0xcf/0x120 [ 80.885730] sixpack_close+0x11f/0x1b0 [ 80.885730] tty_ldisc_kill+0xcb/0x190 [ 80.885730] tty_ldisc_hangup+0x338/0x3d0 [ 80.885730] __tty_hangup+0x504/0x740 [ 80.885730] tty_release+0x46e/0xd80 [ 80.885730] __fput+0x37f/0x770 [ 80.885730] __x64_sys_close+0x7b/0xb0 [ 80.885730] do_syscall_64+0xc4/0x1b0 [ 80.885730] entry_SYSCALL_64_after_hwframe+0x67/0x6f [ 80.893739] ------------[ cut here ]------------ [ 80.894030] WARNING: CPU: 2 PID: 140 at lib/ref_tracker.c:255 ref_tracker_free+0x47b/0x6b0 [ 80.894297] Modules linked in: [ 80.894929] CPU: 2 PID: 140 Comm: ax25_conn_rel_6 Not tainted 6.9.0-rc4-g8cd26fd9 #11 [ 80.895190] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qem4 [ 80.895514] RIP: 0010:ref_tracker_free+0x47b/0x6b0 [ 80.895808] Code: 83 c5 18 4c 89 eb 48 c1 eb 03 8a 04 13 84 c0 0f 85 df 01 00 00 41 83 7d 00 00 75 4b 4c 89 ff 9 [ 80.896171] RSP: 0018:ffff888009edf8c0 EFLAGS: 00000286 [ 80.896339] RAX: 1ffff1100141ac00 RBX: 1ffff1100149463b RCX: dffffc0000000000 [ 80.896502] RDX: 0000000000000001 RSI: 0000000000000246 RDI: ffff88800a0d6518 [ 80.896925] RBP: ffff888009edf9b0 R08: ffff88806d3288d3 R09: 1ffff1100da6511a [ 80.897212] R10: dffffc0000000000 R11: ffffed100da6511b R12: ffff88800a4a31d4 [ 80.897859] R13: ffff88800a4a31d8 R14: dffffc0000000000 R15: ffff88800a0d6518 [ 80.898279] FS: 00007fd88b7fe700(0000) GS:ffff88806d300000(0000) knlGS:0000000000000000 [ 80.899436] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 80.900181] CR2: 00007fd88c001d48 CR3: 000000000993e000 CR4: 00000000000006f0 ... [ 80.935774] ref_tracker: sp%d@000000000bb9df3d has 1/1 users at [ 80.935774] ax25_bind+0x424/0x4e0 [ 80.935774] __sys_bind+0x1d9/0x270 [ 80.935774] __x64_sys_bind+0x75/0x80 [ 80.935774] do_syscall_64+0xc4/0x1b0 [ 80.935774] entry_SYSCALL_64_after_hwframe+0x67/0x6f Change ax25_dev->dev_tracker to the dev_tracker of ax25_cb in order to mitigate the bug. Fixes: feef318c ("ax25: fix UAF bugs of net_device caused by rebinding operation") Signed-off-by:
Duoming Zhou <duoming@zju.edu.cn> Link: https://lore.kernel.org/r/20240419020456.29826-1-duoming@zju.edu.cnSigned-off-by:
-
- 22 Apr, 2024 3 commits
-
-
Paul Geurts authored
During module probe, regulator 'vin' and 'vdd-io' are used and enabled, but the vdd-io regulator overwrites the 'vin' regulator pointer. During remove, only the vdd-io is disabled, as the vin regulator pointer is not available anymore. When regulator_put() is called during resource cleanup a kernel warning is given, as the regulator is still enabled. Store the two regulators in separate pointers and disable both the regulators on module remove. Fixes: 49d22c70 ("NFC: trf7970a: Add device tree option of 1.8 Volt IO voltage") Signed-off-by:
Paul Geurts <paul_geurts@live.nl> Reviewed-by:
-
David Christensen authored
Current maintainer Douglas Miller has left IBM and no replacement has been assigned for the driver. The eHEA hardware was last used on IBM POWER7 systems, the last of which reached end-of-support at the end of 2020. Signed-off-by:
David Christensen <drc@linux.ibm.com> Reviewed-by:
Pradeep Satyanarayana <pradeeps@linux.ibm.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Link: https://lore.kernel.org/r/20240418195517.528577-1-drc@linux.ibm.comSigned-off-by:
-
Matthias Schiffer authored
With the recent PHYLINK changes requiring supported_interfaces to be set, MV88E6250 family switches like the 88E6020 fail to probe - cmode is never initialized on these devices, so mv88e6250_phylink_get_caps() does not set any supported_interfaces flags. Instead of a cmode, on 88E6250 we have a read-only port mode value that encodes similar information. There is no reason to bother mapping port mode to the cmodes of other switch models; instead we introduce a mv88e6250_setup_supported_interfaces() that is called directly from mv88e6250_phylink_get_caps(). Fixes: de5c9bf4 ("net: phylink: require supported_interfaces to be filled") Signed-off-by:
Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Link: https://lore.kernel.org/r/20240417103737.166651-1-matthias.schiffer@ew.tq-group.comSigned-off-by:
-
