- 13 Apr, 2016 25 commits
-
-
Stefan Agner authored
The NAND flash memory populated on Colibri VF61 allows faster NAND timings than the flash memory on VF50. Additionally, due to divider limitations, VF61 did clock the flash even slower than VF50. Assign the NFC clock in the module specific device trees vf500-colibri.dtsi and vf610-colibri.dtsi respectively. This increases raw read speed on Colibri VF61 by about 20%. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Stefan Agner authored
The Vybrid based Colibri modules provide a on-module PHY which is connected to the second FEC instance FEC1. Since the on-module Ethernet port is considered as primary ethernet interface, alias fec1 as ethernet0. This also makes sure that the first MAC address provided by the boot loader gets assigned to the FEC instance used for the on-module PHY. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Fabio Estevam authored
Introduce imx6sx-sdb-sai.dts so that it is possible to use the SAI interface. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Fabio Estevam authored
Document the 'fsl,sdma-event-remap' property and provide an example of its usage. Cc: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Fabio Estevam authored
Property 'dma-source' is not used anywhere, nor it is documented, so let's just get rid of it. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Fabio Estevam authored
According to sdma_peripheral_type in include/linux/platform_data/dma-imx.h IMX_DMATYPE_SAI corresponds to index 24, so fix it accordingly. Suggested-by: Zidan Wang <zidan.wang@nxp.com> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Justin Waters authored
pwm2 is provided on the BA16 Q7 module, but is not used on any of the current configurations. However, future platforms may utilize this device, so we are simply disabling the node rather than removing it completely. Signed-off-by: Justin Waters <justin.waters@timeys.com> Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Gary Bisson authored
Based on i.MX6 SoloX with 1GB of RAM. https://boundarydevices.com/product/nit6_solox-imx6/Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Fabio Estevam authored
It is preferred to use the panel compatible string rather than passing the LCD timings in the device tree. So pass the "hannstar,hsd100pxn1" compatible string to describe the LVDS panel on this board. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Lothar Waßmann authored
This baseboard can be used with all TX6 SoMs, but only a certain set of combinations can be ordered by default. Add support for these combinations in mainline, so that users can easily adopt their own combination of SoM and baseboard themselves. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Lothar Waßmann authored
Add support for the following i.MX6 based modules from Ka-Ro electronics GmbH: TX6S-8034: Processor Freescale i.MX 6 Solo, 800MHz RAM 256MiB DDR3 SDRAM ROM 128MiB NAND Flash Power supply Single 3.1V to 5.5V Size 31mm SO-DIMM Temp. Range industrial grade (-40°C/-25°C to 105°C Tj) TX6S-8035: Processor Freescale i.MX 6 Solo, 800MHz RAM 512MiB DDR3 SDRAM ROM 4GiB eMMC Power supply Single 3.1V to 5.5V Size 31mm SO-DIMM Temp. Range industrial grade (-40°C/-25°C to 105°C Tj) TX6U-8033: Processor Freescale i.MX 6 Dual Lite, 800MHz RAM 1GiB DDR3 SDRAM ROM 4GiB eMMC Power supply Single 3.1V to 5.5V Size 31mm SO-DIMM Temp. Range industrial grade (-40°C/-25°C to 105°C Tj) TX6Q-1036: Processor Freescale i.MX 6Quad, 1GHz RAM 1GB DDR3 SDRAM 64-bit ROM 8GiB eMMC Power supply Single 3.1V to 5.5V Size 31mm SO-DIMM Temp. Range Extended Consumer Grade (-20°C to 105°C Tj) Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Lothar Waßmann authored
Add missing pinctrl for the RTS/CTS lines to uart1 and set the fsl,uart-has-rtscts property on all UARTs to enable support for HW handshake. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Lothar Waßmann authored
Move the pinctrl setting for the board LED from the hoggrp node to a separate node referenced by the LED driver, so that the pin is free to be used for different purpose when the LED driver is disabled. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Lothar Waßmann authored
DT maintainers don't like the 'simple-bus' container around the regulator nodes. So remove it. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Gary Bisson authored
Based on i.MX6 Quad Plus with 4GB of RAM. https://boundarydevices.com/product/nitrogen6max/Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Lothar Waßmann authored
Add mdio node and an appropriate PHY configuration to enable use of the PHY interrupt for link status changes. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Lothar Waßmann authored
Remove the function node around the pinctrl nodes that was obsoleted by commit 5fcdf6a7 ("pinctrl: imx: Allow parsing DT without function nodes"), we can save this container node. Also move the iomux node to the bottom of the file to improve readability of the file. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Lothar Waßmann authored
The spidev driver doesn't like to be instantiated via a naked 'spidev' compatible, though it is very convenient to invoke it this way without a dedicated SPI device for basic functional testing. Disable the spi node by default to silence the WARN_ON() from the spidev driver, but leave the configuration intact otherwise. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Lothar Waßmann authored
Add an empty line between properties and subnode in the clocks node. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Lothar Waßmann authored
GPLv2-only devicetrees make reuse difficult for software components licensed under a different license. The consensus is that a GPL/X11 dual-license should allow all necessary uses, so relicense the imx6*-tx6* files to this combination. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Uwe Kleine-König authored
With SION set the level on such a pin is reported to the UART. So for example when the CS5 pin is configured for GPIO mode and the level changes this triggers an RTS interrupt on uart5. Adding some severity to this issue: The imx uart driver currently doesn't handle correctly irqs for changes on RI and DCD which are enabled automatically when the respective UART is driven in DTE mode (that is, has the fsl,dte-mode property set in the device tree). This results in a stuck machine because the irq isn't cleared and so stalls the CPU. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Uwe Kleine-König authored
Apart from a few additions this also contains two fixes where the daisy chain input selection register was missing. Moreover dropped _MUX from some pins for consistency. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Justin Waters authored
Utilize the new PCIe Tx configuration to properly support the correct values. Signed-off-by: Justin Waters <justin.waters@timesys.com> Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Lothar Waßmann authored
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Lothar Waßmann authored
The TXUL-0010/-0011 modules are Computers On Module manufactured by Ka-Ro electronics GmbH with the following characteristics: Processor Freescale i.MX 6UltraLite MCIMX6G2, 528 MHz RAM 256MB 16-bit DDR3 SDRAM ROM 128MB NAND Flash (TXUL-0010) / 4GB eMMC (TXUL-0011) Power supply Single 3.3 to 5V Size 26mm SO-DIMM Temp. Range -40°C to 85°C Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
- 26 Mar, 2016 15 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-clientLinus Torvalds authored
Pull Ceph updates from Sage Weil: "There is quite a bit here, including some overdue refactoring and cleanup on the mon_client and osd_client code from Ilya, scattered writeback support for CephFS and a pile of bug fixes from Zheng, and a few random cleanups and fixes from others" [ I already decided not to pull this because of it having been rebased recently, but ended up changing my mind after all. Next time I'll really hold people to it. Oh well. - Linus ] * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (34 commits) libceph: use KMEM_CACHE macro ceph: use kmem_cache_zalloc rbd: use KMEM_CACHE macro ceph: use lookup request to revalidate dentry ceph: kill ceph_get_dentry_parent_inode() ceph: fix security xattr deadlock ceph: don't request vxattrs from MDS ceph: fix mounting same fs multiple times ceph: remove unnecessary NULL check ceph: avoid updating directory inode's i_size accidentally ceph: fix race during filling readdir cache libceph: use sizeof_footer() more ceph: kill ceph_empty_snapc ceph: fix a wrong comparison ceph: replace CURRENT_TIME by current_fs_time() ceph: scattered page writeback libceph: add helper that duplicates last extent operation libceph: enable large, variable-sized OSD requests libceph: osdc->req_mempool should be backed by a slab pool libceph: make r_request msg_size calculation clearer ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linuxLinus Torvalds authored
Pull orangefs filesystem from Mike Marshall. This finally merges the long-pending orangefs filesystem, which has been much cleaned up with input from Al Viro over the last six months. From the documentation file: "OrangeFS is an LGPL userspace scale-out parallel storage system. It is ideal for large storage problems faced by HPC, BigData, Streaming Video, Genomics, Bioinformatics. Orangefs, originally called PVFS, was first developed in 1993 by Walt Ligon and Eric Blumer as a parallel file system for Parallel Virtual Machine (PVM) as part of a NASA grant to study the I/O patterns of parallel programs. Orangefs features include: - Distributes file data among multiple file servers - Supports simultaneous access by multiple clients - Stores file data and metadata on servers using local file system and access methods - Userspace implementation is easy to install and maintain - Direct MPI support - Stateless" see Documentation/filesystems/orangefs.txt for more in-depth details. * tag 'ofs-pull-tag-1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux: (174 commits) orangefs: fix orangefs_superblock locking orangefs: fix do_readv_writev() handling of error halfway through orangefs: have ->kill_sb() evict the VFS side of things first orangefs: sanitize ->llseek() orangefs-bufmap.h: trim unused junk orangefs: saner calling conventions for getting a slot orangefs_copy_{to,from}_bufmap(): don't pass bufmap pointer orangefs: get rid of readdir_handle_s ornagefs: ensure that truncate has an up to date inode size orangefs: move code which sets i_link to orangefs_inode_getattr orangefs: remove needless wrapper around GFP_KERNEL orangefs: remove wrapper around mutex_lock(&inode->i_mutex) orangefs: refactor inode type or link_target change detection orangefs: use new getattr for revalidate and remove old getattr orangefs: use new getattr in inode getattr and permission orangefs: use new orangefs_inode_getattr to get size in write and llseek orangefs: use new orangefs_inode_getattr to create new inodes orangefs: rename orangefs_inode_getattr to orangefs_inode_old_getattr orangefs: remove inode->i_lock wrapper orangefs: put register_chrdev immediately before register_filesystem ...
-
git://github.com/jonmason/ntbLinus Torvalds authored
Pull NTB bug fixes from Jon Mason: "NTB bug fixes for tasklet from spinning forever, link errors, translation window setup, NULL ptr dereference, and ntb-perf errors. Also, a modification to the driver API that makes _addr functions optional" * tag 'ntb-4.6' of git://github.com/jonmason/ntb: NTB: Remove _addr functions from ntb_hw_amd NTB: Make _addr functions optional in the API NTB: Fix incorrect clean up routine in ntb_perf NTB: Fix incorrect return check in ntb_perf ntb: fix possible NULL dereference ntb: add missing setup of translation window ntb: stop link work when we do not have memory ntb: stop tasklet from spinning forever during shutdown. ntb: perf test: fix address space confusion
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull more SCSI updates from James Bottomley: "The only new stuff which missed the first pull request is an update to the UFS driver. The rest is an assortment of bug fixes and minor tweaks which appeared recently (some are fixes for recent code and some are stuff spotted recently by the checkers or the new gcc-6 compiler [most of Arnd's stuff])" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (32 commits) scsi_common: do not clobber fixed sense information scsi: ufs: select CONFIG_NLS scsi: fc: use get/put_unaligned64 for wwn access fnic: move printk()s outside of the critical code section. qla2xxx: avoid maybe_uninitialized warning megaraid_sas: add missing curly braces in ioctl handler lpfc: fix misleading indentation scsi_transport_sas: add 'scsi_target_id' sysfs attribute scsi_dh_alua: uninitialized variable in alua_check_vpd() scsi: ufs-qcom: add printouts of testbus debug registers scsi: ufs-qcom: enable/disable the device ref clock scsi: ufs-qcom: set PA_Local_TX_LCC_Enable before link startup scsi: ufs: add device quirk delay before putting UFS rails in LPM scsi: ufs: fix leakage during link off state scsi: ufs: tune UniPro parameters to optimize hibern8 exit time scsi: ufs: handle non spec compliant bkops behaviour by device scsi: ufs: add retry for query descriptors scsi: ufs: add error recovery after DL NAC error scsi: ufs: make error handling bit faster scsi: ufs: disable vccq if it's not needed by UFS device ...
-
Linus Torvalds authored
Commit 0b81d077 ("fs crypto: move per-file encryption from f2fs tree to fs/crypto") moved the f2fs crypto files to fs/crypto/ and renamed the symbol prefixes from "f2fs_" to "fscrypt_" (and from "F2FS_" to just "FS" for preprocessor symbols). Because of the symbol renaming, it's a bit hard to see it as a file move: use git show -M30 0b81d077 to lower the rename detection to just 30% similarity and make git show the files as renamed (the header file won't be shown as a rename even then - since all it contains is symbol definitions, it looks almost completely different). Even with the renames showing as renames, the diffs are not all that easy to read, since so much is just the renames. But Eric Biggers noticed that it's not just all renames: the initialization of the xts_tweak had been broken too, using the inode number rather than the page offset. That's not right - it makes the xfs_tweak the same for all pages of each inode. It _might_ make sense to make the xfs_tweak contain both the offset _and_ the inode number, but not just the inode number. Reported-by: Eric Biggers <ebiggers3@gmail.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Allen Hubbe authored
Kernel zero day testing warned about address space confusion. A virtual iomem address was used where a physical address is expected. The offending functions implement an optional part of the api, so they are removed. They can be added later, after testing. Fixes: a1b36958Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Acked-by: Xiangliang Yu <Xiangliang.Yu@amd.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
-
Al Viro authored
* switch orangefs_remount() to taking ORANGEFS_SB(sb) instead of sb * remove from the list _before_ orangefs_unmount() - request_mutex in the latter will make sure that nothing observed in the loop in ORANGEFS_DEV_REMOUNT_ALL handling will get freed until the end of loop * on removal, keep the forward pointer and zero the back one. That way we can drop and regain the spinlock in the loop body (again, ORANGEFS_DEV_REMOUNT_ALL one) and still be able to get to the rest of the list. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Mike Marshall <hubcap@omnibond.com>
-
Al Viro authored
Error should only be returned if nothing had been read/written. Otherwise we need to report a short read/write instead. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Mike Marshall <hubcap@omnibond.com>
-
Al Viro authored
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Mike Marshall <hubcap@omnibond.com>
-
Al Viro authored
a) open files can't have NULL inodes b) it's SEEK_END, not ORANGEFS_SEEK_END; no need to get cute. c) make_bad_inode() on lseek()? Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Mike Marshall <hubcap@omnibond.com>
-
Al Viro authored
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Mike Marshall <hubcap@omnibond.com>
-
Al Viro authored
just have it return the slot number or -E... - the caller checks the sign anyway Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Mike Marshall <hubcap@omnibond.com>
-
Al Viro authored
it's always __orangefs_bufmap Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Mike Marshall <hubcap@omnibond.com>
-
Al Viro authored
no point, really - we couldn't keep those across the calls of getdents(); it would be too easy to DoS, having all slots exhausted. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Mike Marshall <hubcap@omnibond.com>
-