- PM fix and assorted other code cleanups for amd-sfh (Basavaraj Natikar)

Newer processors support various MP2 register sets. Therefore, to ensure
compatibility and obtain C2P data, use the amd_get_c2p_val().
Co-developed-by: Patil Rajesh Reddy <patreddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <patreddy@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>

Resume or suspend each sensor device based on the num_hid_devices.
Therefore, add a check to handle the special case where no sensors are
present.

Fixes: 93ce5e02 ("HID: amd_sfh: Implement SFH1.1 functionality")
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>

Modify log messages, but only log errors when sensors are missing or a
true failure occurs to avoid misleading "failed" messages.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>

Add a check for the return value of pci_alloc_irq_vectors() and return
error if it fails.

[jkosina@suse.com: reworded changelog based on Srinivas' suggestion]
Fixes: 74fbc7d3 ("HID: intel-ish-hid: add MSI interrupt support")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>

Adds a few recognized Logitech HID++ capable mice over USB and Bluetooth
Signed-off-by: Allan Sandfeld Jensen <kde@carewolf.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>

This device sometimes doesn't send touch release signals when moving
from >=4 fingers to <4 fingers. Using MT_QUIRK_NOT_SEEN_MEANS_UP instead
of MT_QUIRK_ALWAYS_VALID makes sure that no touches become stuck.

MT_QUIRK_FORCE_MULTI_INPUT is not necessary for this device, but does no
harm.
Signed-off-by: Sean O'Brien <seobrien@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>

If the device is unplugged and CONFIG_IIO is not supported, this will
result in a warning message at kernel/workqueue.

Only cancel delayed work in mcp2221_remove(), when CONFIG_IIO is enabled.
Signed-off-by: Abdelrahman Morsy <abdelrahmanhesham94@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>

You can bind whatever action you want to the mouse's reprogrammable
buttons using Windows application. Allow Linux to receive multimedia keycodes.

Fixes: 3ed224e2 ("HID: logitech-dj: Fix 064d:c52f receiver support")
Signed-off-by: Yaraslau Furman <yaro330@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>

In af93a167, i2c_hid_parse was changed to continue with reading the
report descriptor before waiting for reset to be acknowledged.

This has lead to two regressions:

1. We fail to handle reset acknowledgment if it happens while reading
   the report descriptor. The transfer sets I2C_HID_READ_PENDING, which
   causes the IRQ handler to return without doing anything.

   This affects both a Wacom touchscreen and a Sensel touchpad.

2. On a Sensel touchpad, reading the report descriptor this quickly
   after reset results in all zeroes or partial zeroes.

The issues were observed on the Lenovo Thinkpad Z16 Gen 2.

The change in question was made based on a Microsoft article[0] stating
that Windows 8 *may* read the report descriptor in parallel with
awaiting reset acknowledgment, intended as a slight reset performance
optimization. Perhaps they only do this if reset is not completing
quickly enough for their tastes?

As the code is not currently ready to read registers in parallel with a
pending reset acknowledgment, and as reading quickly breaks the report
descriptor on the Sensel touchpad, revert to waiting for reset
acknowledgment before proceeding to read the report descriptor.

[0]: https://learn.microsoft.com/en-us/windows-hardware/drivers/hid/plug-and-play-support-and-power-management

Fixes: af93a167 ("HID: i2c-hid: Move i2c_hid_finish_hwreset() to after reading the report-descriptor")
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2271136
Cc: stable@vger.kernel.org
Signed-off-by: Kenny Levinsen <kl@kl.wtf>
Link: https://lore.kernel.org/r/20240331182440.14477-1-kl@kl.wtf
[hdegoede@redhat.com Drop no longer necessary abort_reset error exit path]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Jiri Kosina <jkosina@suse.com>

This patch is regarding the recent addition of support for the NSO
controllers to hid-nintendo. All controllers are working correctly with the
exception of the N64 controller, which is being identified as a mouse by
udev. This results in the joystick controlling the mouse cursor and the
controller not being detected by games.

The reason for this is because the N64's C buttons have been attributed to
BTN_FORWARD, BTN_BACK, BTN_LEFT, BTN_RIGHT, which are buttons typically
attributed to mice.

This patch changes those buttons to controller buttons, making the
controller be correctly identified as such.
Signed-off-by: Nuno Pereira <nf.pereira@outlook.pt>
Signed-off-by: Jiri Kosina <jkosina@suse.com>

Update my email address to the kernel.org one, as it's getting
more convenient this way.
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>

The variable dev->devc in ish_dev_init was utilized by dev_err before it
was properly assigned. To rectify this, the assignment of dev->devc has
been moved to immediately follow memory allocation.

Without this change "(NULL device *)" is printed for device information.

Fixes: 8ae2f2b0 ("HID: intel-ish-hid: ipc: Fix potential use-after-free in work function")
Fixes: ae02e5d4 ("HID: intel-ish-hid: ipc layer")
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>

The flag I2C_HID_READ_PENDING is used to serialize I2C operations.
However, this is not necessary, because I2C core already has its own
locking for that.

More importantly, this flag can cause a lock-up: if the flag is set in
i2c_hid_xfer() and an interrupt happens, the interrupt handler
(i2c_hid_irq) will check this flag and return immediately without doing
anything, then the interrupt handler will be invoked again in an
infinite loop.

Since interrupt handler is an RT task, it takes over the CPU and the
flag-clearing task never gets scheduled, thus we have a lock-up.

Delete this unnecessary flag.
Reported-and-tested-by: Eva Kurchatova <nyandarknessgirl@gmail.com>
Closes: https://lore.kernel.org/r/CA+eeCSPUDpUg76ZO8dszSbAGn+UHjcyv8F1J-CUPVARAzEtW9w@mail.gmail.com
Fixes: 4a200c3b ("HID: i2c-hid: introduce HID over i2c specification implementation")
Cc: <stable@vger.kernel.org>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.com>

Pull HID updates from Jiri Kosina:

 - support for the following Bluetooth devices from Samsung: Samsung
   wireless {Keyboard, GamePad, Action Mouse, Book Cover, Universal
   Keyboard, HOGP Keyboard} (Sandeep C S)

 - second version of code for applying proper quirk depending on
   firmware version for lenovo/cptkbd (Mikhail Khvainitski)

 - lenovo/cptkbd firmware-dependent quirk (Mikhail Khvainitski)

 - assorted fixes and optimizations for amd-sfh (Basavaraj Natikar)

 - dead code and dead data structures removal (Jiri Slaby, Jiapeng
   Chong)

* tag 'hid-for-linus-2024031301' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (25 commits)
  HID: amd_sfh: Set the AMD SFH driver to depend on x86
  HID: input: avoid polling stylus battery on Chromebook Pompom
  HID: amd_sfh: Extend MP2 register access to SFH
  HID: amd_sfh: Improve boot time when SFH is available
  HID: amd_sfh: Avoid disabling the interrupt
  HID: amd_sfh: Update HPD sensor structure elements
  HID: amd_sfh: Increase sensor command timeout
  HID: intel-ish-hid: ipc: Add Arrow Lake PCI device ID
  HID: nintendo: Remove some unused functions
  HID: hid-prodikeys: remove struct pk_device
  HID: hid-prodikeys: remove unused struct pcmidi_snd members
  HID: hid-multitouch: remove unused mt_application::dev_time
  HID: hid-lg3ff: remove unused struct lg3ff_device
  HID: protect hid_device::bpf by CONFIG_HID_BPF
  HID: wacom: remove unused hid_data::pressure
  HID: apple: remove unused members from struct apple_sc_backlight
  HID: wacom: Clean up use of struct->wacom_wac
  HID: samsung: Add Samsung wireless bookcover and universal keyboard support
  HID: samsung: Add Samsung wireless action mouse support
  HID: samsung: Add Samsung wireless gamepad support
  ...

Merge tag 'auxdisplay-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-auxdisplay

Pull auxdisplay updates from Andy Shevchenko:

 - New driver for GPIO based 7-segment LED display (Chris Packham)

 - New driver for Maxim MAX6958/6959 I²C 7-segment LED display
   controller

 - Refactor linedisp library to make the above happen

 - Update Holtek HT16k33 driver to follow the linedisp refactoring

 - Convert .remove to return void in platform drivers (Uwe Kleine-König)

 - Fix DT schemas (Krzysztof Kozlowski)

 - Refresh MAINTAINERS database

* tag 'auxdisplay-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-auxdisplay: (27 commits)
  auxdisplay: img-ascii-lcd: Convert to platform remove callback returning void
  auxdisplay: hd44780: Convert to platform remove callback returning void
  auxdisplay: cfag12864bfb: Convert to platform remove callback returning void
  auxdisplay: seg-led-gpio: Import linedisp namespace
  dt-bindings: auxdisplay: Add bindings for generic 7-segment LED
  auxdisplay: Add 7-segment LED display driver
  auxdisplay: Add driver for MAX695x 7-segment LED controllers
  dt-bindings: auxdisplay: Add Maxim MAX6958/6959
  auxdisplay: ht16k33: Drop struct ht16k33_seg
  auxdisplay: ht16k33: Switch to use line display character mapping
  auxdisplay: ht16k33: Define a few helper macros
  auxdisplay: ht16k33: Move ht16k33_linedisp_ops down
  auxdisplay: ht16k33: Add default to switch-cases
  auxdisplay: linedisp: Allocate buffer for the string
  auxdisplay: linedisp: Add support for overriding character mapping
  auxdisplay: linedisp: Provide struct linedisp_ops for future extension
  auxdisplay: linedisp: Move exported symbols to a namespace
  auxdisplay: linedisp: Add missing header(s)
  auxdisplay: linedisp: Unshadow error codes in ->store()
  auxdisplay: linedisp: Use unique number for id
  ...

Pull drm updates from Dave Airlie:
 "Highlights are usual, more AMD IP blocks for future hw, i915/xe
  changes, Displayport tunnelling support for i915, msm YUV over DP
  changes, new tests for ttm, but its mostly a lot of stuff all over the
  place from lots of people.

  core:
   - EDID cleanups
   - scheduler error handling fixes
   - managed: add drmm_release_action() with tests
   - add ratelimited drm debug print
   - DPCD PSR early transport macro
   - DP tunneling and bandwidth allocation helpers
   - remove built-in edids
   - dp: Avoid AUX transfers on powered-down displays
   - dp: Add VSC SDP helpers

  cross drivers:
   - use new drm print helpers
   - switch to ->read_edid callback
   - gem: add stats for shared buffers plus updates to amdgpu, i915, xe

  syncobj:
   - fixes to waiting and sleeping

  ttm:
   - add tests
   - fix errno codes
   - simply busy-placement handling
   - fix page decryption

  media:
   - tc358743: fix v4l device registration

  video:
   - move all kernel parameters for video behind CONFIG_VIDEO

  sound:
   - remove <drm/drm_edid.h> include from header

  ci:
   - add tests for msm
   - fix apq8016 runner

  efifb:
   - use copy of global screen_info state

  vesafb:
   - use copy of global screen_info state

  simplefb:
   - fix logging

  bridge:
   - ite-6505: fix DP link-training bug
   - samsung-dsim: fix error checking in probe
   - samsung-dsim: add bsh-smm-s2/pro boards
   - tc358767: fix regmap usage
   - imx: add i.MX8MP HDMI PVI plus DT bindings
   - imx: add i.MX8MP HDMI TX plus DT bindings
   - sii902x: fix probing and unregistration
   - tc358767: limit pixel PLL input range
   - switch to new drm_bridge_read_edid() interface

  panel:
   - ltk050h3146w: error-handling fixes
   - panel-edp: support delay between power-on and enable; use put_sync
     in unprepare; support Mediatek MT8173 Chromebooks, BOE NV116WHM-N49
     V8.0, BOE NV122WUM-N41, CSO MNC207QS1-1 plus DT bindings
   - panel-lvds: support EDT ETML0700Z9NDHA plus DT bindings
   - panel-novatek: FRIDA FRD400B25025-A-CTK plus DT bindings
   - add BOE TH101MB31IG002-28A plus DT bindings
   - add EDT ETML1010G3DRA plus DT bindings
   - add Novatek NT36672E LCD DSI plus DT bindings
   - nt36523: support 120Hz timings, fix includes
   - simple: fix display timings on RK32FN48H
   - visionox-vtdr6130: fix initialization
   - add Powkiddy RGB10MAX3 plus DT bindings
   - st7703: support panel rotation plus DT bindings
   - add Himax HX83112A plus DT bindings
   - ltk500hd1829: add support for ltk101b4029w and admatec 9904370
   - simple: add BOE BP082WX1-100 8.2" panel plus DT bindungs

  panel-orientation-quirks:
   - GPD Win Mini

  amdgpu:
   - Validate DMABuf imports in compute VMs
   - Add RAS ACA framework
   - PSP 13 fixes
   - Misc code cleanups
   - Replay fixes
   - Atom interpretor PS, WS bounds checking
   - DML2 fixes
   - Audio fixes
   - DCN 3.5 Z state fixes
   - Remove deprecated ida_simple usage
   - UBSAN fixes
   - RAS fixes
   - Enable seq64 infrastructure
   - DC color block enablement
   - Documentation updates
   - DC documentation updates
   - DMCUB updates
   - ATHUB 4.1 support
   - LSDMA 7.0 support
   - JPEG DPG support
   - IH 7.0 support
   - HDP 7.0 support
   - VCN 5.0 support
   - SMU 13.0.6 updates
   - NBIO 7.11 updates
   - SDMA 6.1 updates
   - MMHUB 3.3 updates
   - DCN 3.5.1 support
   - NBIF 6.3.1 support
   - VPE 6.1.1 support

  amdkfd:
   - Validate DMABuf imports in compute VMs
   - SVM fixes
   - Trap handler updates and enhancements
   - Fix cache size reporting
   - Relocate the trap handler

  radeon:
   - Atom interpretor PS, WS bounds checking
   - Misc code cleanups

  xe:
   - new query for GuC submission version
   - Remove unused persistent exec_queues
   - Add vram frequency sysfs attributes
   - Add the flag XE_VM_BIND_FLAG_DUMPABLE
   - Drop pre-production workarounds
   - Drop kunit tests for unsupported platforms
   - Start pumbling SR-IOV support with memory based interrupts for VF
   - Allow to map BO in GGTT with PAT index corresponding to XE_CACHE_UC
     to work with memory based interrupts
   - Add GuC Doorbells Manager as prep work SR-IOV
   - Implement additional workarounds for xe2 and MTL
   - Program a few registers according to perfomance guide spec for Xe2
   - Fix remaining 32b build issues and enable it back
   - Fix build with CONFIG_DEBUG_FS=n
   - Fix warnings from GuC ABI headers
   - Introduce Relay Communication for SR-IOV for VF <-> GuC <-> PF
   - Release mmap mappings on rpm suspend
   - Disable mid-thread preemption when not properly supported by
     hardware
   - Fix xe_exec by reserving extra fence slot for CPU bind
   - Fix xe_exec with full long running exec queue
   - Canonicalize addresses where needed for Xe2 and add to devcoredum
   - Toggle USM support for Xe2
   - Only allow 1 ufence per exec / bind IOCTL
   - Add GuC firmware loading for Lunar Lake
   - Add XE_VMA_PTE_64K VMA flag

  i915:
   - Add more ADL-N PCI IDs
   - Enable fastboot also on older platforms
   - Early transport for panel replay and PSR
   - New ARL PCI IDs
   - DP TPS4 PHY test pattern support
   - Unify and improve VSC SDP for PSR and non-PSR cases
   - Refactor memory regions and improve debug logging
   - Rework global state serialization
   - Remove unused CDCLK divider fields
   - Unify HDCP connector logging format
   - Use display instead of graphics version in display code
   - Move VBT and opregion debugfs next to the implementation
   - Abstract opregion interface, use opaque type
   - MTL fixes
   - HPD handling fixes
   - Add GuC submission interface version query
   - Atomically invalidate userptr on mmu-notifier
   - Update handling of MMIO triggered reports
   - Don't make assumptions about intel_wakeref_t type
   - Extend driver code of Xe_LPG to Xe_LPG+
   - Add flex arrays to struct i915_syncmap
   - Allow for very slow HuC loading
   - DP tunneling and bandwidth allocation support

  msm:
   - Correct bindings for MSM8976 and SM8650 platforms
   - Start migration of MDP5 platforms to DPU driver
   - X1E80100 MDSS support
   - DPU:
      - Improve DSC allocation, fixing several important corner cases
      - Add support for SDM630/SDM660 platforms
      - Simplify dpu_encoder_phys_ops
      - Apply fixes targeting DSC support with a single DSC encoder
      - Apply fixes for HCTL_EN timing configuration
      - X1E80100 support
      - Add support for YUV420 over DP
   - GPU:
      - fix sc7180 UBWC config
      - fix a7xx LLC config
      - new gpu support: a305B, a750, a702
      - machine support: SM7150 (different power levels than other a618)
      - a7xx devcoredump support

  habanalabs:
   - configure IRQ affinity according to NUMA node
   - move HBM MMU page tables inside the HBM
   - improve device reset
   - check extended PCIe errors

  ivpu:
   - updates to firmware API
   - refactor BO allocation

  imx:
   - use devm_ functions during init

  hisilicon:
   - fix EDID includes

  mgag200:
   - improve ioremap usage
   - convert to struct drm_edid
   - Work around PCI write bursts

  nouveau:
   - disp: use kmemdup()
   - fix EDID includes
   - documentation fixes

  qaic:
   - fixes to BO handling
   - make use of DRM managed release
   - fix order of remove operations

  rockchip:
   - analogix_dp: get encoder port from DT
   - inno_hdmi: support HDMI for RK3128
   - lvds: error-handling fixes

  ssd130x:
   - support SSD133x plus DT bindings

  tegra:
   - fix error handling

  tilcdc:
   - make use of DRM managed release

  v3d:
   - show memory stats in debugfs
   - Support display MMU page size

  vc4:
   - fix error handling in plane prepare_fb
   - fix framebuffer test in plane helpers

  virtio:
   - add venus capset defines

  vkms:
   - fix OOB access when programming the LUT
   - Kconfig improvements

  vmwgfx:
   - unmap surface before changing plane state
   - fix memory leak in error handling
   - documentation fixes
   - list command SVGA_3D_CMD_DEFINE_GB_SURFACE_V4 as invalid
   - fix null-pointer deref in execbuf
   - refactor display-mode probing
   - fix fencing for creating cursor MOBs
   - fix cursor-memory lifetime

  xlnx:
   - fix live video input for ZynqMP DPSUB

  lima:
   - fix memory leak

  loongson:
   - fail if no VRAM present

  meson:
   - switch to new drm_bridge_read_edid() interface

  renesas:
   - add RZ/G2L DU support plus DT bindings

  mxsfb:
   - Use managed mode config

  sun4i:
   - HDMI: updates to atomic mode setting

  mediatek:
   - Add display driver for MT8188 VDOSYS1
   - DSI driver cleanups
   - Filter modes according to hardware capability
   - Fix a null pointer crash in mtk_drm_crtc_finish_page_flip

  etnaviv:
   - enhancements for NPU and MRT support"

* tag 'drm-next-2024-03-13' of https://gitlab.freedesktop.org/drm/kernel: (1420 commits)
  drm/amd/display: Removed redundant @ symbol to fix kernel-doc warnings in -next repo
  drm/amd/pm: wait for completion of the EnableGfxImu message
  drm/amdgpu/soc21: add mode2 asic reset for SMU IP v14.0.1
  drm/amdgpu: add smu 14.0.1 support
  drm/amdgpu: add VPE 6.1.1 discovery support
  drm/amdgpu/vpe: add VPE 6.1.1 support
  drm/amdgpu/vpe: don't emit cond exec command under collaborate mode
  drm/amdgpu/vpe: add collaborate mode support for VPE
  drm/amdgpu/vpe: add PRED_EXE and COLLAB_SYNC OPCODE
  drm/amdgpu/vpe: add multi instance VPE support
  drm/amdgpu/discovery: add nbif v6_3_1 ip block
  drm/amdgpu: Add nbif v6_3_1 ip block support
  drm/amdgpu: Add pcie v6_1_0 ip headers (v5)
  drm/amdgpu: Add nbif v6_3_1 ip headers (v5)
  arch/powerpc: Remove <linux/fb.h> from backlight code
  macintosh/via-pmu-backlight: Include <linux/backlight.h>
  fbdev/chipsfb: Include <linux/backlight.h>
  drm/etnaviv: Restore some id values
  drm/amdkfd: make kfd_class constant
  drm/amdgpu: add ring timeout information in devcoredump
  ...

Pull ext2, isofs, udf, and quota updates from Jan Kara:
 "A lot of material this time:

   - removal of a lot of GFP_NOFS usage from ext2, udf, quota (either it
     was legacy or replaced with scoped memalloc_nofs_*() API)

   - removal of BUG_ONs in quota code

   - conversion of UDF to the new mount API

   - tightening quota on disk format verification

   - fix some potentially unsafe use of RCU pointers in quota code and
     annotate everything properly to make sparse happy

   - a few other small quota, ext2, udf, and isofs fixes"

* tag 'fs_for_v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: (26 commits)
  udf: remove SLAB_MEM_SPREAD flag usage
  quota: remove SLAB_MEM_SPREAD flag usage
  isofs: remove SLAB_MEM_SPREAD flag usage
  ext2: remove SLAB_MEM_SPREAD flag usage
  ext2: mark as deprecated
  udf: convert to new mount API
  udf: convert novrs to an option flag
  MAINTAINERS: add missing git address for ext2 entry
  quota: Detect loops in quota tree
  quota: Properly annotate i_dquot arrays with __rcu
  quota: Fix rcu annotations of inode dquot pointers
  isofs: handle CDs with bad root inode but good Joliet root directory
  udf: Avoid invalid LVID used on mount
  quota: Fix potential NULL pointer dereference
  quota: Drop GFP_NOFS instances under dquot->dq_lock and dqio_sem
  quota: Set nofs allocation context when acquiring dqio_sem
  ext2: Remove GFP_NOFS use in ext2_xattr_cache_insert()
  ext2: Drop GFP_NOFS use in ext2_get_blocks()
  ext2: Drop GFP_NOFS allocation from ext2_init_block_alloc_info()
  udf: Remove GFP_NOFS allocation in udf_expand_file_adinicb()
  ...

Pull fsnotify updates from Jan Kara:

 - fsnotify optimizations to reduce cost of fsnotify when nobody is
   watching

 - fix longstanding wart that system could not be suspended when some
   process was waiting for response to fanotify permission event

 - some spelling fixes

* tag 'fsnotify_for_v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  fanotify: allow freeze when waiting response for permission events
  fanotify: Fix misspelling of "writable"
  fsnotify: Fix misspelling of "writable"
  inotify: Fix misspelling of "writable"
  fsnotify: Add fsnotify_sb_has_watchers() helper
  fsnotify: optimize the case of no parent watcher

Pull xfs updates from Chandan Babu:

 - Online repair updates:
    - More ondisk structures being repaired:
        - Inode's mode field by trying to obtain file type value from
          the a directory entry
        - Quota counters
        - Link counts of inodes
        - FS summary counters
        - Support for in-memory btrees has been added to support repair
          of rmap btrees
    - Misc changes:
        - Report corruption of metadata to the health tracking subsystem
        - Enable indirect health reporting when resources are scarce
        - Reduce memory usage while repairing refcount btree
        - Extend "Bmap update" intent item to support atomic extent
          swapping on the realtime device
        - Extend "Bmap update" intent item to support extended attribute
          fork and unwritten extents
    - Code cleanups:
        - Bmap log intent
        - Btree block pointer checking
        - Btree readahead
        - Buffer target
        - Symbolic link code

 - Remove mrlock wrapper around the rwsem

 - Convert all the GFP_NOFS flag usages to use the scoped
   memalloc_nofs_save() API instead of direct calls with the GFP_NOFS

 - Refactor and simplify xfile abstraction. Lower level APIs in shmem.c
   are required to be exported in order to achieve this

 - Skip checking alignment constraints for inode chunk allocations when
   block size is larger than inode chunk size

 - Do not submit delwri buffers collected during log recovery when an
   error has been encountered

 - Fix SEEK_HOLE/DATA for file regions which have active COW extents

 - Fix lock order inversion when executing error handling path during
   shrinking a filesystem

 - Remove duplicate ifdefs

* tag 'xfs-6.9-merge-8' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (183 commits)
  xfs: shrink failure needs to hold AGI buffer
  mm/shmem.c: Use new form of *@param in kernel-doc
  kernel-doc: Add unary operator * to $type_param_ref
  xfs: use kvfree() in xlog_cil_free_logvec()
  xfs: xfs_btree_bload_prep_block() should use __GFP_NOFAIL
  xfs: fix scrub stats file permissions
  xfs: fix log recovery erroring out on refcount recovery failure
  xfs: move symlink target write function to libxfs
  xfs: move remote symlink target read function to libxfs
  xfs: move xfs_symlink_remote.c declarations to xfs_symlink_remote.h
  xfs: xfs_bmap_finish_one should map unwritten extents properly
  xfs: support deferred bmap updates on the attr fork
  xfs: support recovering bmap intent items targetting realtime extents
  xfs: add a realtime flag to the bmap update log redo items
  xfs: add a xattr_entry helper
  xfs: fix xfs_bunmapi to allow unmapping of partial rt extents
  xfs: move xfs_bmap_defer_add to xfs_bmap_item.c
  xfs: reuse xfs_bmap_update_cancel_item
  xfs: add a bi_entry helper
  xfs: remove xfs_trans_set_bmap_flags
  ...

- small cleanup of struct->wacom_wac usage (Tatsunosuke Tobita)

- removal of unused data structures all over the place (Jiri Slaby)

- support for the following Bluetooth devices (Sandeep C S):

        Samsung wireless Keyboard
        Samsung wireless GamePad
        Samsung Wireless Action Mouse
        Samsung Wireless Book Cover
        Samsung Wireless Universal Keyboard
        Samsung Wireless HOGP Keyboard
Signed-off-by: Jiri Kosina <jkosina@suse.com>

- dead code removal in hid-nintendo (Jiapeng Chong)

- 2nd version of code for applying proper quirk depending on firmware version
  for lenovo/cptkbd (Mikhail Khvainitski)

- assorted fixes and optimizations for amd-sfh (Basavaraj Natikar)
Signed-off-by: Jiri Kosina <jkosina@suse.com>

Pull smb client updates from Steve French:

 - fix for folios/netfs data corruption in cifs_extend_writeback

 - additional tracepoint added

 - updates for special files and symlinks: improvements to allow
   selecting use of either WSL or NFS reparse point format on creating
   special files

 - allocation size improvement for cached files

 - minor cleanup patches

 - fix to allow changing the password on remount when password for the
   session is expired.

 - lease key related fixes: caching hardlinked files, deletes of
   deferred close files, and an important fix to better reuse lease keys
   for compound operations, which also can avoid lease break timeouts
   when low on credits

 - fix potential data corruption with write/readdir races

 - compression cleanups and a fix for compression headers

* tag '6.9-rc-smb3-client-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6: (24 commits)
  cifs: update internal module version number for cifs.ko
  smb: common: simplify compression headers
  smb: common: fix fields sizes in compression_pattern_payload_v1
  smb: client: negotiate compression algorithms
  smb3: add dynamic trace point for ioctls
  cifs: Fix writeback data corruption
  smb: client: return reparse type in /proc/mounts
  smb: client: set correct d_type for reparse DFS/DFSR and mount point
  smb: client: parse uid, gid, mode and dev from WSL reparse points
  smb: client: introduce SMB2_OP_QUERY_WSL_EA
  smb: client: Fix a NULL vs IS_ERR() check in wsl_set_xattrs()
  smb: client: add support for WSL reparse points
  smb: client: reduce number of parameters in smb2_compound_op()
  smb: client: fix potential broken compound request
  smb: client: move most of reparse point handling code to common file
  smb: client: introduce reparse mount option
  smb: client: retry compound request without reusing lease
  smb: client: do not defer close open handles to deleted files
  smb: client: reuse file lease key in compound operations
  smb3: update allocation size more accurately on write completion
  ...

As Linus suggested this enables pidfs unconditionally. A key property to
retain is the ability to compare pidfds by inode number (cf. [1]).
That's extremely helpful just as comparing namespace file descriptors by
inode number is. They are used in a variety of scenarios where they need
to be compared, e.g., when receiving a pidfd via SO_PEERPIDFD from a
socket to trivially authenticate a the sender and various other
use-cases.

For 64bit systems this is pretty trivial to do. For 32bit it's slightly
more annoying as we discussed but we simply add a dumb ida based
allocator that gets used on 32bit. This gives the same guarantees about
inode numbers on 64bit without any overflow risk. Practically, we'll
never run into overflow issues because we're constrained by the number
of processes that can exist on 32bit and by the number of open files
that can exist on a 32bit system. On 64bit none of this matters and
things are very simple.

If 32bit also needs the uniqueness guarantee they can simply parse the
contents of /proc/<pid>/fd/<nr>. The uniqueness guarantees have a
variety of use-cases. One of the most obvious ones is that they will
make pidfiles (or "pidfdfiles", I guess) reliable as the unique
identifier can be placed into there that won't be reycled. Also a
frequent request.

Note, I took the chance and simplified path_from_stashed() even further.
Instead of passing the inode number explicitly to path_from_stashed() we
let the filesystem handle that internally. So path_from_stashed() ends
up even simpler than it is now. This is also a good solution allowing
the cleanup code to be clean and consistent between 32bit and 64bit. The
cleanup path in prepare_anon_dentry() is also switched around so we put
the inode before the dentry allocation. This means we only have to call
the cleanup handler for the filesystem's inode data once and can rely
->evict_inode() otherwise.

Aside from having to have a bit of extra code for 32bit it actually ends
up a nice cleanup for path_from_stashed() imho.

Tested on both 32 and 64bit including error injection.

Link: https://github.com/systemd/systemd/pull/31713 [1]
Link: https://lore.kernel.org/r/20240312-dingo-sehnlich-b3ecc35c6de7@braunerSigned-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull modules updates from Luis Chamberlain:
 "Christophe Leroy did most of the work on this release, first with a
  few cleanups on CONFIG_STRICT_KERNEL_RWX and ending with error
  handling for when set_memory_XX() can fail.

  This is part of a larger effort to clean up all these callers which
  can fail, modules is just part of it"

* tag 'modules-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
  module: Don't ignore errors from set_memory_XX()
  lib/test_kmod: fix kernel-doc warnings
  powerpc: Simplify strict_kernel_rwx_enabled()
  modules: Remove #ifdef CONFIG_STRICT_MODULE_RWX around rodata_enabled
  init: Declare rodata_enabled and mark_rodata_ro() at all time
  module: Change module_enable_{nx/x/ro}() to more explicit names
  module: Use set_memory_rox()

Pull EFI updates from Ard Biesheuvel:

 - Measure initrd and command line using the CC protocol if the ordinary
   TCG2 protocol is not implemented, typically on TDX confidential VMs

 - Avoid creating mappings that are both writable and executable while
   running in the EFI boot services. This is a prerequisite for getting
   the x86 shim loader signed by MicroSoft again, which allows the
   distros to install on x86 PCs that ship with EFI secure boot enabled.

 - API update for struct platform_driver::remove()

* tag 'efi-next-for-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  virt: efi_secret: Convert to platform remove callback returning void
  x86/efistub: Remap kernel text read-only before dropping NX attribute
  efi/libstub: Add get_event_log() support for CC platforms
  efi/libstub: Measure into CC protocol if TCG2 protocol is absent
  efi/libstub: Add Confidential Computing (CC) measurement typedefs
  efi/tpm: Use symbolic GUID name from spec for final events table
  efi/libstub: Use TPM event typedefs from the TCG PC Client spec

Pull tpm updates from Jarkko Sakkinen:
 "Small bug fixes and device tree updates. No new features"

* tag 'tpmdd-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
  tpm: tis_i2c: Add compatible string nuvoton,npct75x
  tpm_tis: Add compatible string atmel,at97sc3204
  tpm_tis_spi: Add compatible string atmel,attpm20p
  dt-bindings: tpm: Add compatible string atmel,attpm20p
  tpm,tpm_tis: Avoid warning splat at shutdown
  tpm/tpm_ftpm_tee: fix all kernel-doc warnings

Pull mailbox updates from Jassi Brar:

 - imx: add support for i.MX95 ELE/V2X MU

 - misc: I will be signing-off from my personal gmail id from now on

* tag 'mailbox-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
  mailbox: imx: support i.MX95 Generic/ELE/V2X MU
  mailbox: imx: populate sub-nodes
  mailbox: imx: get RR/TR registers num from Parameter register
  mailbox: imx: support return value of init
  dt-bindings: mailbox: fsl,mu: add i.MX95 Generic/ELE/V2X MU compatible

Pull thermal control updates from Rafael Wysocki:
 "These mostly change the thermal core in a few ways allowing thermal
  drivers to be simplified, in particular in their removal and failing
  probe handling parts that are notoriously prone to errors, and
  propagate the changes to several drivers.

  Apart from that, support for a new platform is added (Intel Lunar
  Lake-M), some bugs are fixed and some code is cleaned up, as usual.

  Specifics:

   - Store zone trips table and zone operations directly in struct
     thermal_zone_device (Rafael Wysocki)

   - Fix up flex array initialization during thermal zone device
     registration (Nathan Chancellor)

   - Rework writable trip points handling in the thermal core and
     several drivers (Rafael Wysocki)

   - Thermal core code cleanups (Dan Carpenter, Flavio Suligoi)

   - Use thermal zone accessor functions in the int340x Intel thermal
     driver (Rafael Wysocki)

   - Add Lunar Lake-M PCI ID to the int340x Intel thermal driver
     (Srinivas Pandruvada)

   - Minor fixes for thermal governors (Rafael Wysocki, Di Shen)

   - Trip point handling fixes for the iwlwifi wireless driver (Rafael
     Wysocki)

   - Code cleanups (Rafael J. Wysocki, AngeloGioacchino Del Regno)"

* tag 'thermal-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (29 commits)
  thermal: core: remove unnecessary check in trip_point_hyst_store()
  thermal: intel: int340x_thermal: Use thermal zone accessor functions
  thermal: core: Remove excess empty line from a comment
  thermal: int340x: processor_thermal: Add Lunar Lake-M PCI ID
  thermal: core: Eliminate writable trip points masks
  thermal: of: Set THERMAL_TRIP_FLAG_RW_TEMP directly
  thermal: imx: Set THERMAL_TRIP_FLAG_RW_TEMP directly
  wifi: iwlwifi: mvm: Set THERMAL_TRIP_FLAG_RW_TEMP directly
  mlxsw: core_thermal: Set THERMAL_TRIP_FLAG_RW_TEMP directly
  thermal: intel: Set THERMAL_TRIP_FLAG_RW_TEMP directly
  thermal: core: Drop the .set_trip_hyst() thermal zone operation
  thermal: core: Add flags to struct thermal_trip
  thermal: core: Move initial num_trips assignment before memcpy()
  thermal: Get rid of CONFIG_THERMAL_WRITABLE_TRIPS
  thermal: intel: Adjust ops handling during thermal zone registration
  thermal: ACPI: Constify acpi_thermal_zone_ops
  thermal: core: Store zone ops in struct thermal_zone_device
  thermal: intel: Discard trip tables after zone registration
  thermal: ACPI: Discard trips table after zone registration
  thermal: core: Store zone trips table in struct thermal_zone_device
  ...

Pull ACPI updates from Rafael Wysocki:
 "These modify the ACPI device events and processor enumeration code to
  take the 'enabled' _STA bit into account as mandated by the ACPI
  specification, convert several platform drivers to using a remove
  callback that returns void, add some new quirks for ACPI IRQ override
  and other things, address assorted issues and clean up code.

  Specifics:

   - Rearrange Device Check and Bus Check notification handling in the
     ACPI device hotplug code to make it get the "enabled" _STA bit into
     account (Rafael Wysocki)

   - Modify acpi_processor_add() to skip processors with the "enabled"
     _STA bit clear, as per the specification (Rafael Wysocki)

   - Stop failing Device Check notification handling without a valid
     reason (Rafael Wysocki)

   - Defer enumeration of devices that depend on a device with an ACPI
     device ID equalt to INTC10CF to address probe ordering issues on
     some platforms (Wentong Wu)

   - Constify acpi_bus_type (Ricardo Marliere)

   - Make the ACPI-specific suspend-to-idle code take the Low-Power S0
     Idle MSFT UUID into account on non-AMD systems (Rafael Wysocki)

   - Add ACPI IRQ override quirks for some new platforms (Sergey
     Kalinichev, Maxim Kudinov, Alexey Froloff, Sviatoslav Harasymchuk,
     Nicolas Haye)

   - Make the NFIT parsing code use acpi_evaluate_dsm_typed() (Andy
     Shevchenko)

   - Fix a memory leak in acpi_processor_power_exit() (Armin Wolf)

   - Make it possible to quirk the CSI-2 and MIPI DisCo for Imaging
     properties parsing and add a quirk for Dell XPS 9315 (Sakari Ailus)

   - Prevent false-positive static checker warnings from triggering by
     intializing some variables in the ACPI thermal code to zero (Colin
     Ian King)

   - Add DELL0501 handling to acpi_quirk_skip_serdev_enumeration() and
     make that function generic (Hans de Goede)

   - Make the ACPI backlight code handle fetching EDID that is longer
     than 256 bytes (Mario Limonciello)

   - Skip initialization of GHES_ASSIST structures for Machine Check
     Architecture in APEI (Avadhut Naik)

   - Convert several plaform drivers in the ACPI subsystem to using a
     remove callback that returns void (Uwe Kleine-König)

   - Drop the long-deprecated custom_method debugfs interface that is
     problematic from the security standpoint (Rafael Wysocki)

   - Use %pe in a couple of places in the ACPI code for easier error
     decoding (Onkarnath)

   - Fix register width information handling during system memory
     accesses in the ACPI CPPC library (Jarred White)

   - Add AMD CPPC V2 support for family 17h processors to the ACPI CPPC
     library (Perry Yuan)"

* tag 'acpi-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (35 commits)
  ACPI: resource: Use IRQ override on Maibenben X565
  ACPI: CPPC: Use access_width over bit_width for system memory accesses
  ACPI: CPPC: enable AMD CPPC V2 support for family 17h processors
  ACPI: APEI: Skip initialization of GHES_ASSIST structures for Machine Check Architecture
  ACPI: scan: Consolidate Device Check and Bus Check notification handling
  ACPI: scan: Rework Device Check and Bus Check notification handling
  ACPI: scan: Make acpi_processor_add() check the device enabled bit
  ACPI: scan: Relocate acpi_bus_trim_one()
  ACPI: scan: Fix device check notification handling
  ACPI: resource: Add MAIBENBEN X577 to irq1_edge_low_force_override
  ACPI: pfr_update: Convert to platform remove callback returning void
  ACPI: pfr_telemetry: Convert to platform remove callback returning void
  ACPI: fan: Convert to platform remove callback returning void
  ACPI: GED: Convert to platform remove callback returning void
  ACPI: DPTF: Convert to platform remove callback returning void
  ACPI: AGDI: Convert to platform remove callback returning void
  ACPI: TAD: Convert to platform remove callback returning void
  ACPI: APEI: GHES: Convert to platform remove callback returning void
  ACPI: property: Polish ignoring bad data nodes
  ACPI: thermal_lib: Initialize temp_decik to zero
  ...

Pull power management updates from Rafael Wysocki:
 "From the functional perspective, the most significant change here is
  the addition of support for Energy Models that can be updated
  dynamically at run time.

  There is also the addition of LZ4 compression support for hibernation,
  the new preferred core support in amd-pstate, new platforms support in
  the Intel RAPL driver, new model-specific EPP handling in intel_pstate
  and more.

  Apart from that, the cpufreq default transition delay is reduced from
  10 ms to 2 ms (along with some related adjustments), the system
  suspend statistics code undergoes a significant rework and there is a
  usual bunch of fixes and code cleanups all over.

  Specifics:

   - Allow the Energy Model to be updated dynamically (Lukasz Luba)

   - Add support for LZ4 compression algorithm to the hibernation image
     creation and loading code (Nikhil V)

   - Fix and clean up system suspend statistics collection (Rafael
     Wysocki)

   - Simplify device suspend and resume handling in the power management
     core code (Rafael Wysocki)

   - Fix PCI hibernation support description (Yiwei Lin)

   - Make hibernation take set_memory_ro() return values into account as
     appropriate (Christophe Leroy)

   - Set mem_sleep_current during kernel command line setup to avoid an
     ordering issue with handling it (Maulik Shah)

   - Fix wake IRQs handling when pm_runtime_force_suspend() is used as a
     driver's system suspend callback (Qingliang Li)

   - Simplify pm_runtime_get_if_active() usage and add a replacement for
     pm_runtime_put_autosuspend() (Sakari Ailus)

   - Add a tracepoint for runtime_status changes tracking (Vilas Bhat)

   - Fix section title markdown in the runtime PM documentation (Yiwei
     Lin)

   - Enable preferred core support in the amd-pstate cpufreq driver
     (Meng Li)

   - Fix min_perf assignment in amd_pstate_adjust_perf() and make the
     min/max limit perf values in amd-pstate always stay within the
     (highest perf, lowest perf) range (Tor Vic, Meng Li)

   - Allow intel_pstate to assign model-specific values to strings used
     in the EPP sysfs interface and make it do so on Meteor Lake
     (Srinivas Pandruvada)

   - Drop long-unused cpudata::prev_cummulative_iowait from the
     intel_pstate cpufreq driver (Jiri Slaby)

   - Prevent scaling_cur_freq from exceeding scaling_max_freq when the
     latter is an inefficient frequency (Shivnandan Kumar)

   - Change default transition delay in cpufreq to 2ms (Qais Yousef)

   - Remove references to 10ms minimum sampling rate from comments in
     the cpufreq code (Pierre Gondois)

   - Honour transition_latency over transition_delay_us in cpufreq (Qais
     Yousef)

   - Stop unregistering cpufreq cooling on CPU hot-remove (Viresh Kumar)

   - General enhancements / cleanups to ARM cpufreq drivers (tianyu2,
     Nícolas F. R. A. Prado, Erick Archer, Arnd Bergmann, Anastasia
     Belova)

   - Update cpufreq-dt-platdev to block/approve devices (Richard Acayan)

   - Make the SCMI cpufreq driver get a transition delay value from
     firmware (Pierre Gondois)

   - Prevent the haltpoll cpuidle governor from shrinking guest
     poll_limit_ns below grow_start (Parshuram Sangle)

   - Avoid potential overflow in integer multiplication when computing
     cpuidle state parameters (C Cheng)

   - Adjust MWAIT hint target C-state computation in the ACPI cpuidle
     driver and in intel_idle to return a correct value for C0 (He
     Rongguang)

   - Address multiple issues in the TPMI RAPL driver and add support for
     new platforms (Lunar Lake-M, Arrow Lake) to Intel RAPL (Zhang Rui)

   - Fix freq_qos_add_request() return value check in dtpm_cpu (Daniel
     Lezcano)

   - Fix kernel-doc for dtpm_create_hierarchy() (Yang Li)

   - Fix file leak in get_pkg_num() in x86_energy_perf_policy (Samasth
     Norway Ananda)

   - Fix cpupower-frequency-info.1 man page typo (Jan Kratochvil)

   - Fix a couple of warnings in the OPP core code related to W=1 builds
     (Viresh Kumar)

   - Move dev_pm_opp_{init|free}_cpufreq_table() to pm_opp.h (Viresh
     Kumar)

   - Extend dev_pm_opp_data with turbo support (Sibi Sankar)

   - dt-bindings: drop maxItems from inner items (David Heidelberg)"

* tag 'pm-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (95 commits)
  dt-bindings: opp: drop maxItems from inner items
  OPP: debugfs: Fix warning around icc_get_name()
  OPP: debugfs: Fix warning with W=1 builds
  cpufreq: Move dev_pm_opp_{init|free}_cpufreq_table() to pm_opp.h
  OPP: Extend dev_pm_opp_data with turbo support
  Fix cpupower-frequency-info.1 man page typo
  cpufreq: scmi: Set transition_delay_us
  firmware: arm_scmi: Populate fast channel rate_limit
  firmware: arm_scmi: Populate perf commands rate_limit
  cpuidle: ACPI/intel: fix MWAIT hint target C-state computation
  PM: sleep: wakeirq: fix wake irq warning in system suspend
  powercap: dtpm: Fix kernel-doc for dtpm_create_hierarchy() function
  cpufreq: Don't unregister cpufreq cooling on CPU hotplug
  PM: suspend: Set mem_sleep_current during kernel command line setup
  cpufreq: Honour transition_latency over transition_delay_us
  cpufreq: Limit resolving a frequency to policy min/max
  Documentation: PM: Fix runtime_pm.rst markdown syntax
  cpufreq: amd-pstate: adjust min/max limit perf
  cpufreq: Remove references to 10ms min sampling rate
  cpufreq: intel_pstate: Update default EPPs for Meteor Lake
  ...

Pull pmdomain updates from Ulf Hansson:
 "Core:
   - Log a message when unused PM domains gets disabled
   - Scale down parent/child performance states in the reverse order

  Providers:
   - qcom: rpmpd: Add power domains support for MSM8974, MSM8974PRO,
     PMA8084 and PM8841
   - renesas: rcar-gen4-sysc: Reduce atomic delays
   - renesas: rcar-sysc: Adjust the waiting time to cover the worst case
   - renesas: r8a779h0-sysc: Add support for the r8a779h0 PM domains
   - imx: imx8mp-blk-ctrl: Add the fdcc clock to the hdmimix domains
   - imx: imx8mp-blk-ctrl: Error out if domains are missing in DT

  Improve support for multiple PM domains:
   - Add two helper functions to attach/detach multiple PM domains
   - Convert a couple of drivers to use the new helper functions"

* tag 'pmdomain-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (22 commits)
  pmdomain: renesas: rcar-gen4-sysc: Reduce atomic delays
  pmdomain: renesas: Adjust the waiting time to cover the worst case
  pmdomain: qcom: rpmpd: Add MSM8974PRO+PMA8084 power domains
  pmdomain: qcom: rpmpd: Add MSM8974+PM8841 power domains
  pmdomain: core: constify of_phandle_args in add device and subdomain
  pmdomain: core: constify of_phandle_args in xlate
  media: venus: Convert to dev_pm_domain_attach|detach_list() for vcodec
  remoteproc: qcom_q6v5_adsp: Convert to dev_pm_domain_attach|detach_list()
  remoteproc: imx_rproc: Convert to dev_pm_domain_attach|detach_list()
  remoteproc: imx_dsp_rproc: Convert to dev_pm_domain_attach|detach_list()
  PM: domains: Add helper functions to attach/detach multiple PM domains
  pmdomain: imx8mp-blk-ctrl: imx8mp_blk: Add fdcc clock to hdmimix domain
  pmdomain: mediatek: Use devm_platform_ioremap_resource() in init_scp()
  pmdomain: renesas: r8a779h0-sysc: Add r8a779h0 support
  pmdomain: imx8mp-blk-ctrl: Error out if domains are missing in DT
  pmdomain: ti: Add a null pointer check to the omap_prm_domain_init
  pmdomain: renesas: rcar-gen4-sysc: Remove unneeded includes
  pmdomain: core: Print a message when unused power domains are disabled
  pmdomain: qcom: rpmpd: Keep one RPM handle for all RPMPDs
  pmdomain: core: Scale down parent/child performance states in reverse order
  ...

Pull hwmon updates from Guenter Roeck:
 "New drivers:
   - Amphenol ChipCap 2
   - ASPEED g6 PWM/Fan tach
   - Astera Labs PT5161L retimer
   - ASUS ROG RYUJIN II 360 AIO cooler
   - LTC4282
   - Microsoft Surface devices
   - MPS MPQ8785 Synchronous Step-Down Converter
   - NZXT Kraken X and Z series AIO CPU coolers

  Additional chip support in existing drivers:
   - Ayaneo Air Plus 7320u (oxp-sensors)
   - INA260 (ina2xx)
   - XPS 9315 (dell-smm)
   - MSI customer ID (nct6683)

  Devicetree bindings updates:
   - Common schema for hardware monitoring devices
   - Common schema for fans
   - Update chip descriptions to use common schema
   - Document regulator properties in several drivers
   - Explicit bindings for infineon buck converters

  Other improvements:
   - Replaced rbtree with maple tree register cache in several drivers
   - Added support for humidity min/max alarm and volatage fault
     attributes to hwmon core
   - Dropped non-functional I2C_CLASS_HWMON support for drivers w/o
     detect()
   - Dropped obsolete and redundant entried from MAINTAINERS
   - Cleaned up axi-fan-control and coretemp drivers
   - Minor fixes and improvements in several other drivers"

* tag 'hwmon-for-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (70 commits)
  hwmon: (dell-smm) Add XPS 9315 to fan control whitelist
  hwmon: (aspeed-g6-pwm-tacho): Support for ASPEED g6 PWM/Fan tach
  dt-bindings: hwmon: Support Aspeed g6 PWM TACH Control
  dt-bindings: hwmon: fan: Add fan binding to schema
  dt-bindings: hwmon: tda38640: Add interrupt & regulator properties
  hwmon: (amc6821) add of_match table
  dt-bindings: hwmon: lm75: use common hwmon schema
  hwmon: (sis5595) drop unused DIV_TO_REG function
  dt-bindings: hwmon: reference common hwmon schema
  dt-bindings: hwmon: lltc,ltc4286: use common hwmon schema
  dt-bindings: hwmon: adi,adm1275: use common hwmon schema
  dt-bindings: hwmon: ti,ina2xx: use common hwmon schema
  dt-bindings: hwmon: add common properties
  hwmon: (pmbus/ir38064) Use PMBUS_REGULATOR_ONE to declare regulator
  hwmon: (pmbus/lm25066) Use PMBUS_REGULATOR_ONE to declare regulator
  hwmon: (pmbus/tda38640) Use PMBUS_REGULATOR_ONE to declare regulator
  regulator: dt-bindings: promote infineon buck converters to their own binding
  dt-bindings: hwmon/pmbus: ti,lm25066: document regulators
  dt-bindings: hwmon: nuvoton,nct6775: Add compatible value for NCT6799
  MAINTAINERS: Drop redundant hwmon entries
  ...

Pull gpio updates from Bartosz Golaszewski:
 "The biggest feature is the locking overhaul. Up until now the
  synchronization in the GPIO subsystem was broken. There was a single
  spinlock "protecting" multiple data structures but doing it wrong (as
  evidenced by several places where it would be released when a sleeping
  function was called and then reacquired without checking the protected
  state).

  We tried to use an RW semaphore before but the main issue with GPIO is
  that we have drivers implementing the interfaces in both sleeping and
  non-sleeping ways as well as user-facing interfaces that can be called
  both from process as well as atomic contexts. Both ends converge in
  the same code paths that can use neither spinlocks nor mutexes. The
  only reasonable way out is to use SRCU and go mostly lockless. To that
  end: we add several SRCU structs in relevant places and use them to
  assure consistency between API calls together with atomic reads and
  writes of GPIO descriptor flags where it makes sense.

  This code has spent several weeks in next and has received several
  fixes in the first week or two after which it stabilized nicely. The
  GPIO subsystem is now resilient to providers being suddenly unbound.
  We managed to also remove the existing character device RW semaphore
  and the obsolete global spinlock.

  Other than the locking rework we have one new driver (for Chromebook
  EC), much appreciated documentation improvements from Kent and the
  regular driver improvements, DT-bindings updates and GPIOLIB core
  tweaks.

  Serialization rework:
   - use SRCU to serialize access to the global GPIO device list, to
     GPIO device structs themselves and to GPIO descriptors
   - make the GPIO subsystem resilient to the GPIO providers being
     unbound while the API calls are in progress
   - don't dereference the SRCU-protected chip pointer if the
     information we need can be obtained from the GPIO device structure
   - move some of the information contained in struct gpio_chip to
     struct gpio_device to further reduce the need to dereference the
     former
   - pass the GPIO device struct instead of the GPIO chip to sysfs
     callback to, again, reduce the need for accessing the latter
   - get GPIO descriptors from the GPIO device, not from the chip for
     the same reason
   - allow for mostly lockless operation of the GPIO driver API: assure
     consistency with SRCU and atomic operations
   - remove the global GPIO spinlock
   - remove the character device RW semaphore

  Core GPIOLIB:
   - constify pointers in GPIO API where applicable
   - unify the GPIO counting APIs for ACPI and OF
   - provide a macro for iterating over all GPIOs, not only the ones
     that are requested
   - remove leftover typedefs
   - pass the consumer device to GPIO core in
     devm_fwnode_gpiod_get_index() for improved logging
   - constify the GPIO bus type
   - don't warn about removing GPIO chips with descriptors still held by
     users as we can now handle this situation gracefully
   - remove unused logging helpers
   - unexport functions that are only used internally in the GPIO
     subsystem
   - set the device type (assign the relevant struct device_type) for
     GPIO devices

  New drivers:
   - add the ChromeOS EC GPIO driver

  Driver improvements:
   - allow building gpio-vf610 with COMPILE_TEST as well as disabling it
     in menuconfig (before it was always built for i.MX cofigs)
   - count the number of EICs using the device properties instead of
     hard-coding it in gpio-eic-sprd
   - improve the device naming, extend the debugfs output and add
     lockdep asserts to gpio-sim

  DT bindings:
   - document the 'label' property for gpio-pca9570
   - convert aspeed,ast2400-gpio bindings to DT schema
   - disallow unevaluated properties for gpio-mvebu
   - document a new model in renesas,rcar-gpio

  Documentation:
   - improve the character device kerneldocs in user-space headers
   - add proper documentation for the character device uAPI (both v1 and v2)
   - move the sysfs and gpio-mockup docs into the "obsolete" section
   - improve naming consistency for GPIO terms
   - clarify the line values description for sysfs
   - minor docs improvements
   - improve the driver API contract for setting GPIO direction
   - mark unsafe APIs as deprecated in kerneldocs and suggest
     replacements

  Other:
   - remove an obsolete test from selftests"

* tag 'gpio-updates-for-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (79 commits)
  gpio: sysfs: repair export returning -EPERM on 1st attempt
  selftest: gpio: remove obsolete gpio-mockup test
  gpiolib: Deduplicate cleanup for-loop in gpiochip_add_data_with_key()
  dt-bindings: gpio: aspeed,ast2400-gpio: Convert to DT schema
  gpio: acpi: Make acpi_gpio_count() take firmware node as a parameter
  gpio: of: Make of_gpio_get_count() take firmware node as a parameter
  gpiolib: Pass consumer device through to core in devm_fwnode_gpiod_get_index()
  gpio: sim: use for_each_hwgpio()
  gpio: provide for_each_hwgpio()
  gpio: don't warn about removing GPIO chips with active users anymore
  gpio: sim: delimit the fwnode name with a ":" when generating labels
  gpio: sim: add lockdep asserts
  gpio: Add ChromeOS EC GPIO driver
  gpio: constify of_phandle_args in of_find_gpio_device_by_xlate()
  gpio: fix memory leak in gpiod_request_commit()
  gpio: constify opaque pointer "data" in gpio_device_find()
  gpio: cdev: fix a NULL-pointer dereference with DEBUG enabled
  gpio: uapi: clarify default_values being logical
  gpio: sysfs: fix inverted pointer logic
  gpio: don't let lockdep complain about inherently dangerous RCU usage
  ...

Pull spi updates from Mark Brown:
 "This release sees some exciting changes from David Lechner which
  implements some optimisations that have been talked about for a long
  time which allows client drivers to pre-prepare SPI messages for
  repeated or low latency use. This lets us move work out of latency
  sensitive paths and avoid repeating work for frequently performed
  operations. As well as being useful in itself this will also be used
  in future to allow controllers to directly trigger SPI operations (eg,
  from interrupts).

  Otherwise this release has mostly been focused on cleanups, plus a
  couple of new devices:

   - Support for pre-optimising messages

   - A big set of updates from Uwe Kleine-König moving drivers to use
     APIs with more modern terminology for controllers

   - Major overhaul of the s3c64xx driver

   - Support for Google GS101 and Samsung Exynos850"

* tag 'spi-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (122 commits)
  spi: Introduce SPI_INVALID_CS and is_valid_cs()
  spi: Fix types of the last chip select storage variables
  spi: Consistently use BIT for cs_index_mask
  spi: Exctract spi_dev_check_cs() helper
  spi: Exctract spi_set_all_cs_unused() helper
  spi: s3c64xx: switch exynos850 to new port config data
  spi: s3c64xx: switch gs101 to new port config data
  spi: s3c64xx: deprecate fifo_lvl_mask, rx_lvl_offset and port_id
  spi: s3c64xx: get rid of the OF alias ID dependency
  spi: s3c64xx: introduce s3c64xx_spi_set_port_id()
  spi: s3c64xx: let the SPI core determine the bus number
  spi: s3c64xx: allow FIFO depth to be determined from the compatible
  spi: s3c64xx: retrieve the FIFO depth from the device tree
  spi: s3c64xx: determine the fifo depth only once
  spi: s3c64xx: allow full FIFO masks
  spi: s3c64xx: define a magic value
  spi: dt-bindings: introduce FIFO depth properties
  spi: axi-spi-engine: use struct_size() macro
  spi: axi-spi-engine: use __counted_by() attribute
  spi: axi-spi-engine: remove p from struct spi_engine_message_state
  ...

Pull regulator updates from Mark Brown:
 "This has been a very quiet release, mostly cleanups, API updates and
  simple device additions. I messed up slightly and there are a couple
  of duplicated commits resulting from me leaving things in my inbox
  which didn't seem worth removing by the time I noticed them.

   - Conversion of several drivers to GPIO descriptors

   - Build out the features of of the MP8859 driver

   - Support for Qualcomm PM4125 and PM6150"

* tag 'regulator-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (31 commits)
  regulator: lp8788-buck: fix copy and paste bug in lp8788_dvs_gpio_request()
  regulator: core: make regulator_class constant
  regulator: da9121: Remove unused of_gpio.h
  regulator: userspace-consumer: add module device table
  regulator: dt-bindings: gpio-regulator: Fix "gpios-states" and "states" array bounds
  regulator: mp8859: Implement set_current_limit()
  regulator: mp8859: Report slew rate
  regulator: mp8859: Support status and error readback
  regulator: mp8859: Support active discharge control
  regulator: mp8859: Support mode operations
  regulator: mp8859: Support enable control
  regulator: mp8859: Validate and log device identifier information
  regulator: mp8859: Specify register accessibility and enable caching
  regulator: max8998: Convert to GPIO descriptors
  regulator: max8997: Convert to GPIO descriptors
  regulator: lp8788-buck: Fully convert to GPIO descriptors
  regulator: da9055: Fully convert to GPIO descriptors
  regulator: max8973: Finalize switch to GPIO descriptors
  regulator: dt-bindings: qcom,usb-vbus-regulator: add support for PM4125
  regulator: dt-bindings: qcom,usb-vbus-regulator: add support for PM4125
  ...