Pull ARM updates (part two) from Russell King:

 - breakpoint and perf updates from Will Deacon.

 - hypervisor boot mode updates from Will.

 - support for Power State Coordination Interface via the Hypervisor

 - core ARM support for KVM

* 'for-linus-2' of git://git.linaro.org/people/rmk/linux-arm: (32 commits)
  KVM: ARM: Add maintainer entry for KVM/ARM
  KVM: ARM: Power State Coordination Interface implementation
  KVM: ARM: Handle I/O aborts
  KVM: ARM: Handle guest faults in KVM
  KVM: ARM: VFP userspace interface
  KVM: ARM: Demux CCSIDR in the userspace API
  KVM: ARM: User space API for getting/setting co-proc registers
  KVM: ARM: Emulation framework and CP15 emulation
  KVM: ARM: World-switch implementation
  KVM: ARM: Inject IRQs and FIQs from userspace
  KVM: ARM: Memory virtualization setup
  KVM: ARM: Hypervisor initialization
  KVM: ARM: Initial skeleton to compile KVM support
  ARM: Section based HYP idmap
  ARM: Add page table and page defines needed by KVM
  ARM: perf: simplify __hw_perf_event_init err handling
  ARM: perf: remove unnecessary checks for idx < 0
  ARM: perf: handle armpmu_register failing
  ARM: perf: don't pretend to support counting of L1I writes
  ARM: perf: remove redundant NULL check on cpu_pmu
  ...

Pull ARM updates (part one) from Russell King:

 - MMC patches from Ulf Hansson and Pawel Moll.  These add support for
   DDR mode and the latest variant found on ARM Versatile Express, as
   well as a number of cleanups.

 - A fix for to improve the behaviour of ARMs sched_clock()

 - Changes to the ARM ioremap() code.  I'm not convinced with the
   primary arguments for this, but it's been around for a while, and
   people seem happy with it - and the "other" justification for this is
   at

      http://lkml.org/lkml/2012/12/6/184

 - Add SCHED_HRTICK to ARMs Kconfig

 - Making the ARM SHA/AES code Thumb-2 compatible

 - A collection of other small updates.

* 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (26 commits)
  ARM: add SCHED_HRTICK config option
  ARM: 7650/1: mm: replace direct access to mm->context.id with new macro
  ARM: 7649/1: mm: mm->context.id fix for big-endian
  ARM: 7648/1: pci: Allow passing per-controller private data
  ARM: 7647/1: pci: Keep pci_common_init() around after init
  ARM: fix warnings introduced by previous patch
  ARM: 7646/1: mm: use static_vm for managing static mapped areas
  ARM: 7645/1: ioremap: introduce an infrastructure for static mapped area
  ARM: 7644/1: vmregion: remove vmregion code entirely
  MAINTAINERS: Re-assert MMCI driver maintainer status
  MAINTAINERS: add additional file for MMCI driver
  MAINTAINERS: add maintainer entry for AMBA serial drivers
  ARM: 7637/1: memory: use SZ_ constants for defining the virtual memory layout
  ARM: 7643/1: sched: correct update_sched_clock()
  ARM: 7635/1: versatile: fix the PCI IRQ regression
  ARM: 7639/1: cache-l2x0: add missed dummy outer_resume entry
  ARM: 7630/1: mmc: mmci: Fixup and cleanup code for DMA handling
  ARM: 7632/1: spinlock: avoid exclusive accesses on unlock() path
  ARM: 7631/1: mmc: mmci: Add new VE MMCI variant
  ARM: 7623/1: mmc: mmci: Fixup clock gating when freq is 0 for ST-variants
  ...

Pull m68k update from Geert Uytterhoeven.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Sort out !CONFIG_MMU_SUN3 vs. CONFIG_HAS_DMA
  swim: Add missing spinlock init

Pull EDAC updates from Borislav Petkov:
 "Mostly AMD's side of EDAC.  It is basically a new family enablement
  stuff: AMD F16h MCE decoding enablement from Jacob Shin.  The rest is
  trivial cleanups."

* tag 'edac_3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  mpc85xx_edac: Fix typo
  EDAC, MCE, AMD: Remove unneeded exports
  EDAC, MCE, AMD: Add MCE decoding support for Family 16h
  EDAC, MCE, AMD: Make MC2 decoding per-family
  amd64_edac: Remove dead code

Pull ACPI and power management updates from Rafael Wysocki:

 - Rework of the ACPI namespace scanning code from Rafael J.  Wysocki
   with contributions from Bjorn Helgaas, Jiang Liu, Mika Westerberg,
   Toshi Kani, and Yinghai Lu.

 - ACPI power resources handling and ACPI device PM update from Rafael
   J Wysocki.

 - ACPICA update to version 20130117 from Bob Moore and Lv Zheng with
   contributions from Aaron Lu, Chao Guan, Jesper Juhl, and Tim Gardner.

 - Support for Intel Lynxpoint LPSS from Mika Westerberg.

 - cpuidle update from Len Brown including Intel Haswell support, C1
   state for intel_idle, removal of global pm_idle.

 - cpuidle fixes and cleanups from Daniel Lezcano.

 - cpufreq fixes and cleanups from Viresh Kumar and Fabio Baltieri with
   contributions from Stratos Karafotis and Rickard Andersson.

 - Intel P-states driver for Sandy Bridge processors from Dirk
   Brandewie.

 - cpufreq driver for Marvell Kirkwood SoCs from Andrew Lunn.

 - cpufreq fixes related to ordering issues between acpi-cpufreq and
   powernow-k8 from Borislav Petkov and Matthew Garrett.

 - cpufreq support for Calxeda Highbank processors from Mark Langsdorf
   and Rob Herring.

 - cpufreq driver for the Freescale i.MX6Q SoC and cpufreq-cpu0 update
   from Shawn Guo.

 - cpufreq Exynos fixes and cleanups from Jonghwan Choi, Sachin Kamat,
   and Inderpal Singh.

 - Support for "lightweight suspend" from Zhang Rui.

 - Removal of the deprecated power trace API from Paul Gortmaker.

 - Assorted updates from Andreas Fleig, Colin Ian King, Davidlohr Bueso,
   Joseph Salisbury, Kees Cook, Li Fei, Nishanth Menon, ShuoX Liu,
   Srinivas Pandruvada, Tejun Heo, Thomas Renninger, and Yasuaki
   Ishimatsu.

* tag 'pm+acpi-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (267 commits)
  PM idle: remove global declaration of pm_idle
  unicore32 idle: delete stray pm_idle comment
  openrisc idle: delete pm_idle
  mn10300 idle: delete pm_idle
  microblaze idle: delete pm_idle
  m32r idle: delete pm_idle, and other dead idle code
  ia64 idle: delete pm_idle
  cris idle: delete idle and pm_idle
  ARM64 idle: delete pm_idle
  ARM idle: delete pm_idle
  blackfin idle: delete pm_idle
  sparc idle: rename pm_idle to sparc_idle
  sh idle: rename global pm_idle to static sh_idle
  x86 idle: rename global pm_idle to static x86_idle
  APM idle: register apm_cpu_idle via cpuidle
  cpufreq / intel_pstate: Add kernel command line option disable intel_pstate.
  cpufreq / intel_pstate: Change to disallow module build
  tools/power turbostat: display SMI count by default
  intel_idle: export both C1 and C1E
  ACPI / hotplug: Fix concurrency issues and memory leaks
  ...

Pull device tree changes from Grant Likely:
 "All around device tree changes destined for v3.8.  Aside from the
  documentation updates the highlights in this branch include:

   - Kbuild changes for using CPP with .dts files
   - locking fix from preempt_rt patchset
   - include DT alias names in device uevent
   - Selftest bugfixes and improvements
   - New function for counting phandles stanzas in a property
   - constify argument to of_node_full_name()
   - Various bug fixes

  This tree did also contain a commit to use platform_device_add instead
  of open-coding the device add code, but it caused problems with amba
  devices and needed to be reverted."

* tag 'dt-for-linus' of git://git.secretlab.ca/git/linux: (23 commits)
  Revert "of: use platform_device_add"
  kbuild: limit dtc+cpp include path
  gpio: Make of_count_named_gpios() use new of_count_phandle_with_args()
  of: Create function for counting number of phandles in a property
  of/base: Clean up exit paths for of_parse_phandle_with_args()
  of/selftest: Use selftest() macro throughout
  of/selftest: Fix GPIOs selftest to cover the 7th case
  of: fix recursive locking in of_get_next_available_child()
  documentation/devicetree: Fix a typo in exynos-dw-mshc.txt
  OF: convert devtree lock from rw_lock to raw spinlock
  of/exynos_g2d: Add Bindings for exynos G2D driver
  kbuild: create a rule to run the pre-processor on *.dts files
  input: Extend matrix-keypad device tree binding
  devicetree: Move NS2 LEDs binding into LEDs directory
  of: use platform_device_add
  powerpc/5200: Fix size to request_mem_region() call
  documentation/devicetree: Fix typos
  of: add 'const' to of_node_full_name parameter
  of: Output devicetree alias names in uevent
  DT: add vendor prefixes for Renesas and Toshiba
  ...

Pull SPI changes from Grant Likely:
 "Changes to both core spi code and spi device drivers.  The driver
  changes are the usual set of bug fixes and platform enablement.

  Core code changes include:

   - More intelligent assignment of SPI bus numbers when using DT

   - Common mechanism for using gpios as CS lines

   - Pull checks for bits_per_word and transfer speed out of drivers and
     into core code

   - Ensure temporary DMA buffers are DMA safe"

* tag 'spi-for-linus' of git://git.secretlab.ca/git/linux: (50 commits)
  spi: Document cs_gpios and cs_gpio in kernel-doc
  spi/of: Fix initialization of cs_gpios array
  spi/pxa2xx: add support for Lynxpoint SPI controllers
  spi/pxa2xx: add support for Intel Low Power Subsystem SPI
  spi/pxa2xx: add support for SPI_LOOP
  spi/pxa2xx: add support for runtime PM
  spi/pxa2xx: add support for DMA engine
  spi/pxa2xx: break out the private DMA API usage into a separate file
  spi/ath79: add shutdown handler
  spi/mips-lantiq: set SPI_MASTER_HALF_DUPLEX flag
  spi/mips-lantiq: make use of spi_finalize_current_message
  spi/bcm63xx: work around inability to keep CS up
  spi/davinci: use request_threaded_irq() to fix deadlock
  spi/orion: Use module_platform_driver()
  spi/bcm63xx: reject transfers unable to transfer
  spi: Ensure memory used for spi_write_then_read() is DMA safe
  spi/spi-mpc512x-psc: init mode bits supported by the driver
  spi/mpc512x-psc: don't use obsolet cell-index property
  spi: Remove erroneous __init, __exit and __exit_p() references in drivers
  spi/s3c64xx: fix checkpatch warnings and error
  ...

Pull clock framework update from Michael Turquette:
 "The common clock framework changes for 3.9 are almost entirely fixes.

  None are dire enough to be Cc'd to stable which may be interpreted to
  mean that users of the framework are reaching stability.  Lots of new
  adoption of this framework is via DeviceTree data and that comes
  through the respective architecture and platform trees instead of
  through the clk framework tree.

  Two new features are improved debugfs output and an improvement to how
  DT clocks are initialized by reusing a common method."

* tag 'clk-for-linus' of git://git.linaro.org/people/mturquette/linux: (25 commits)
  clk: sunxi: remove stale Makefile entry
  clk: vexpress: Use common of_clk_init() function
  clk: zynq: Use common of_clk_init() function
  clk: vt8500: Use common of_clk_init() function
  clk: highbank: Use common of_clk_init() function
  clk: sunxi: Use common of_clk_init() function
  clk: add common of_clk_init() function
  clk: Deduplicate exit code in clk_set_rate
  clk: beautify Makefile
  clk-divider: fix macros
  clk: prima2: enable dt-binding clkdev mapping
  clk: mxs: Index is always positive
  clk: max77686: Avoid double free at remove time
  clk: remove exported function from __init section
  clk: vt8500: Add support for WM8750/WM8850 PLL clocks
  clk: vt8500: Fix division-by-0 when requested rate=0
  clk: vt8500: Fix device clock divisor calculations
  clk: vt8500: Fix error in PLL calculations on non-exact match.
  clk: max77686: Remove unnecessary NULL checking for container_of()
  clk: JSON debugfs clock tree summary
  ...

Pull input updates from Dmitry Torokhov:
 "Two new touchpad drivers - Cypress APA I2C Trackpad and Cypress PS/2
  touchpad and a big update to ALPS driver from Kevin Cernekee that adds
  support for "Rushmore" touchpads and paves way for adding support for
  "Dolphin" touchpads.

  There is also a new input driver for Goldfish emulator and also
  Android keyreset driver was folded into SysRq code.

  A few more drivers were updated with device tree bindings and others
  got some small cleanups and fixes."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (55 commits)
  Input: cyttsp-spi - remove duplicate MODULE_ALIAS()
  Input: tsc2005 - add MODULE_ALIAS
  Input: tegra-kbc - require CONFIG_OF, remove platform data
  Input: synaptics - initialize pointer emulation usage
  Input: MT - do not apply filtering on emulated events
  Input: bma150 - make some defines public and fix some comments
  Input: bma150 - fix checking pm_runtime_get_sync() return value
  Input: ALPS - enable trackstick on Rushmore touchpads
  Input: ALPS - add support for "Rushmore" touchpads
  Input: ALPS - make the V3 packet field decoder "pluggable"
  Input: ALPS - move pixel and bitmap info into alps_data struct
  Input: ALPS - fix command mode check
  Input: ALPS - rework detection of Pinnacle AGx touchpads
  Input: ALPS - move {addr,nibble}_command settings into alps_set_defaults()
  Input: ALPS - use function pointers for different protocol handlers
  Input: ALPS - rework detection sequence
  Input: ALPS - introduce helper function for repeated commands
  Input: ALPS - move alps_get_model() down below hw_init code
  Input: ALPS - copy "model" info into alps_data struct
  Input: ALPS - document the alps.h data structures
  ...

Pull battery updates from Anton Vorontsov:
 "Four new drivers:

   - goldfish_battery:

     This is Android Emulator battery driver.  Originally from Google,
     but Intel folks reshaped it for mainline

   - pm2301_charger:

     A new driver for ST-Ericsson 2301 Power Management chip, uses
     AB8500 battery management core

   - qnap-poweroff:

     The driver adds poweroff functionality for QNAP NAS boxes

   - restart-poweroff:

     A generic driver that implements 'power off by restarting'.  The
     actual poweroff functionality is implemented through a bootloader,
     so Linux' task is just to restart the box.  The driver is useful on
     Buffalo Linkstation LS-XHL and LS-CHLv2 boards.  Andrew Lunn worked
     on submitting the driver (as well as qnap-poweroff above).

  Additionally:

   - A lot of fixes for ab8500 drivers.  This is a part of efforts of
     syncing internal ST-Ericsson development tree with the mainline.
     Lee Jones @ Linaro worked on compilation and reshaping these
     series.

   - New health properties for the power supplies: "Watchdog timer
     expire" and "Safety timer expire"

   - As usual, a bunch of fixes/cleanups here and there"

* tag 'for-v3.9' of git://git.infradead.org/battery-2.6: (81 commits)
  bq2415x_charger: Add support for offline and 100mA mode
  generic-adc-battery: Fix forever loop in gab_remove()
  goldfish_battery: Add missing GENERIC_HARDIRQS dependency
  da9030_battery: Include notifier.h
  bq27x00_battery: Fix reporting battery temperature
  power/reset: Remove newly introduced __dev* annotations
  lp8727_charger: Small cleanup in naming
  ab8500_btemp: Demote initcall sequence
  ds2782_battery: Add power_supply_changed() calls for proper uevent support
  power: Add battery driver for goldfish emulator
  u8500-charger: Delay for USB enumeration
  ab8500-bm: Remove individual [charger|btemp|fg|chargalg] pdata structures
  ab8500-charger: Do not touch VBUSOVV bits
  ab8500-fg: Use correct battery charge full design
  pm2301: LPN mode control support
  pm2301: Enable vbat low monitoring
  ab8500-bm: Flush all work queues before suspending
  ab8500-fg: Go to INIT_RECOVERY when charger removed
  ab8500-charger: Add support for autopower on AB8505 and AB9540
  abx500-chargalg: Add new sysfs interface to get current charge status
  ...

Fix up fairly straightforward conflicts in the ab8500 driver.  But since
it seems to be ARM-specific, I can't even compile-test the result..

Pull hwmon updates from Guenter Roeck:

 - New drivers for MAX6697 and compatibles and for INA209.

 - Added support for IT8771E, IT8772E, MAX34460, MAX34461, MCP98244, and
   ADT7420 to existing drivers.

 - Added support for additional attributes to various drivers.

 - Replaced SENSORS_LIMIT with clamp_val; retire SENSORS_LIMIT;

 - Clean up PMBus code to reduce its size; clean up adt7410 driver.

 - A couple of minor bug fixes as well as documentation cleanup.

 - Out-of-tree change: Replace SENSORS_LIMIT with clamp_val in
   platform/x86/eeepc-laptop driver.

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (32 commits)
  hwmon: (ntc_thermistor): Fix sparse warnings
  hwmon: (adt7410) Add device table entry for the adt7420
  hwmon: (adt7410) Use I2C_ADDRS helper macro
  hwmon: (adt7410) Use the SIMPLE_DEV_PM_OPS helper macro
  hwmon: (adt7410) Let suspend/resume depend on CONFIG_PM_SLEEP
  hwmon: (adt7410) Clear unwanted bits in the config register
  hwmon: (jc42) Add support for MCP98244
  hwmon: (pmbus) Clean up for code size reduction
  hwmon: (pmbus/max34440) Add support for MAX34460 and MAX34461
  hwmon: (pmbus) Add support for word status register
  hwmon: (pmbus/zl6100) Add support for VMON/VDRV
  hwmon: (pmbus) Add function to clear sensor cache
  hwmon: (pmbus) Add support for additional voltage sensor
  hwmon: (pmbus) Use krealloc to allocate attribute memory
  hwmon: (pmbus) Simplify memory allocation for sensor attributes
  hwmon: (pmbus) Improve boolean handling
  hwmon: (pmbus) Simplify memory allocation for labels and booleans
  hwmon: (pmbus) Use dev variable to represent client->dev
  hwmon: (pmbus) Fix 'Macros with multiple statements' checkpatch error
  hwmon: (pmbus) Drop unnecessary error messages in probe error path
  ...

Pull pinctrl changes from Linus Walleij:
 "These are the main pinctrl changes for the v3.9 merge window.  The
  most interesting change by far is how the device core grabs pinctrl
  default handles avoiding the need to stick boilerplate into driver
  consumers.

   - Grabbing of default pinctrl handles from the device core.  These
     are the hunks hitting drivers/base.  All is ACKed by Greg, after a
     long discussion about different alternatives.

   - Some stuff also touches the MFD and ARM SoC trees, this has been
     coordinated and ACKed.

   - New drivers for:
     - The Tegra 114 sub-SoC
     - Allwinner sunxi
     - New ABx500 driver and sub-SoC drivers for AB8500, AB8505, AB9540
       and AB8540.

   - Make it possible for hogged pins to enter a sleep mode, and make it
     possible for drivers to control that mode.

   - Various clean-up, extensions and device tree support to various pin
     controllers."

* tag 'pinctrl-for-v3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (68 commits)
  pinctrl: tegra: add clfvs function to Tegra114 support
  pinctrl: generic: rename input schmitt disable
  pinctrl/pinconfig: add debug interface
  pinctrl: samsung: remove duplicated line
  ARM: ux500: use real AB8500 IRQ numbers instead of virtual ones
  ARM: ux500: remove irq_base property from platform_data
  pinctrl/abx500: use direct IRQ defines
  pinctrl/abx500: replace IRQ offsets with table read-in values
  pinctrl/abx500: move IRQ handling to ab8500-core
  pinctrl: exynos5440: remove erroneous __init
  pinctrl/abx500: adjust offset for get_mode()
  pinctrl/abx500: add Device Tree support
  pinctrl/abx500: align GPIO cluster boundaries
  pinctrl/abx500: prevent error path from corrupting returning error
  pinctrl: sunxi: add of_xlate function
  pinctrl/lantiq: fix pin number in ltq_pmx_gpio_request_enable
  pinctrl/lantiq: add functionality to falcon_pinconf_dbg_show
  pinctrl/lantiq: fix pinconfig parameters
  pinctrl/lantiq: one of the boot leds was defined incorrectly
  pinctrl/lantiq: only probe available pad controllers
  ...

Pull regulator updates from Mark Brown:
 "A fairly quiet release for the regulator API, the bulk of the changes
  being lots of small cleanups and API updates contributed by Axel Lin
  with just a small set of larger changes:

   - New driver for LP8755

   - DT support for S5M8767, TPS51632, TPS6507x and TPS65090

   - Support for writing a "commit changes" bit in the regmap helper
     functions."

* tag 'regulator-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (60 commits)
  regulator: Fix memory garbage dev_err printout.
  regulator: max77686: Reuse rdev_get_id() function.
  regulator: tps51632: Use regulator_[get|set]_voltage_sel_regmap
  regulator: as3711: Fix checking if no platform initialization data
  regulator: s5m8767: Prevent possible NULL pointer dereference
  regulator: s5m8767: Fix dev argument for devm_kzalloc and of_get_regulator_init_data
  regulator: core: Optimize _regulator_do_set_voltage if voltage does not change
  regulator: max8998: Let regulator core handle the case selector == old_selector
  regulator: s5m8767: Use of_get_child_count()
  regulator: anatop: improve precision of delay time
  regulator: show state for GPIO-controlled regulators
  regulator: s5m8767: Fix build in non-DT case
  regulator: add device tree support for s5m8767
  regulator: palmas: Remove a redundant setting for warm_reset
  regulator: mc13xxx: Use of_get_child_count()
  regulator: max8997: Use of_get_child_count()
  regulator: tps65090: Fix using wrong dev argument for calling of_regulator_match
  regulators: anatop: add set_voltage_time_sel interface
  regulator: Add missing of_node_put()
  regulator: tps6507x: Fix using wrong dev argument for calling of_regulator_match
  ...

Pull regmap updates from Mark Brown:
 "Several nice new features and performance improvements here,
  especially the first:

   - Support for using the cache infrastructure without the physical
     I/O, allowing devices which don't fit the physical model regmap has
     to take advantage of the cache infrastructure, contributed by
     Andrey Smirnov.

   - Several small improvements to the support for wake capable IRQs.

   - Support for asynchronous I/O, allowing us to come much closer to
     saturating fast buses like SPI.

   - Support for simple array caches, giving higher performance for use
     with MMIO devices.

   - Restoration of the use of bulk reads for handling interrupts,
     giving a performance improvement.

   - Support for 24 bit register addresses.

   - More performance improvements for debugfs."

* tag 'regmap-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: (24 commits)
  regmap: mmio: add register clock support
  regmap: debugfs: Factor out debugfs_tot_len calc into a function
  regmap: debugfs: Optimize seeking within blocks of registers
  regmap: debugfs: Add a `max_reg' member in struct regmap_debugfs_off_cache
  regmap: debugfs: Fix reading in register field units
  regmap: spi: Handle allocation failures gracefully
  regmap: Export regmap_async_complete()
  regmap: Export regmap_async_complete_cb
  regmap: include linux/sched.h to fix build
  regmap: spi: Support asynchronous I/O for SPI
  regmap: Add asynchronous I/O support
  regmap: Add "no-bus" option for regmap API
  regmap: regmap: avoid spurious warning in regmap_read_debugfs
  regmap: Add provisions to have user-defined write operation
  regmap: Add provisions to have user-defined read operation
  regmap: Add support for 24 bit wide register addresses
  mfd: wm5110: Mark wakes as inverted
  mfd: wm5102: Mark wakes as inverted
  regmap: irq: Support wake IRQ mask inversion
  regmap: irq: Fix sync of wake statuses to hardware
  ...

Pull cpuset changes from Tejun Heo:

 - Synchornization has seen a lot of changes with focus on decoupling
   cpuset synchronization from cgroup internal locking.

   After this change, there only remain a couple of mostly trivial
   dependencies on cgroup_lock outside cgroup core proper.  cgroup_lock
   is scheduled to be unexported in this devel cycle.

   This will finally remove the fragile locking order around cgroup
   (cgroup locking wants to / should be one of the outermost but yet has
   been acquired from deep inside individual controllers).

 - At this point, Li is most knowlegeable with cpuset and taking over
   the maintainership of cpuset.

* 'for-3.9-cpuset' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cpuset: drop spurious retval assignment in proc_cpuset_show()
  cpuset: fix RCU lockdep splat
  cpuset: update MAINTAINERS
  cpuset: remove cpuset->parent
  cpuset: replace cpuset->stack_list with cpuset_for_each_descendant_pre()
  cpuset: replace cgroup_mutex locking with cpuset internal locking
  cpuset: schedule hotplug propagation from cpuset_attach() if the cpuset is empty
  cpuset: pin down cpus and mems while a task is being attached
  cpuset: make CPU / memory hotplug propagation asynchronous
  cpuset: drop async_rebuild_sched_domains()
  cpuset: don't nest cgroup_mutex inside get_online_cpus()
  cpuset: reorganize CPU / memory hotplug handling
  cpuset: cleanup cpuset[_can]_attach()
  cpuset: introduce cpuset_for_each_child()
  cpuset: introduce CS_ONLINE
  cpuset: introduce ->css_on/offline()
  cpuset: remove fast exit path from remove_tasks_in_empty_cpuset()
  cpuset: remove unused cpuset_unlock()

Pull cgroup changes from Tejun Heo:
 "Nothing too drastic.

   - Removal of synchronize_rcu() from userland visible paths.

   - Various fixes and cleanups from Li.

   - cgroup_rightmost_descendant() added which will be used by cpuset
     changes (it will be a separate pull request)."

* 'for-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: fail if monitored file and event_control are in different cgroup
  cgroup: fix cgroup_rmdir() vs close(eventfd) race
  cpuset: fix cpuset_print_task_mems_allowed() vs rename() race
  cgroup: fix exit() vs rmdir() race
  cgroup: remove bogus comments in cgroup_diput()
  cgroup: remove synchronize_rcu() from cgroup_diput()
  cgroup: remove duplicate RCU free on struct cgroup
  sched: remove redundant NULL cgroup check in task_group_path()
  sched: split out css_online/css_offline from tg creation/destruction
  cgroup: initialize cgrp->dentry before css_alloc()
  cgroup: remove a NULL check in cgroup_exit()
  cgroup: fix bogus kernel warnings when cgroup_create() failed
  cgroup: remove synchronize_rcu() from rebind_subsystems()
  cgroup: remove synchronize_rcu() from cgroup_attach_{task|proc}()
  cgroup: use new hashtable implementation
  cgroups: fix cgroup_event_listener error handling
  cgroups: move cgroup_event_listener.c to tools/cgroup
  cgroup: implement cgroup_rightmost_descendant()
  cgroup: remove unused dummy cgroup_fork_callbacks()

Conflicts:
	arch/arm/include/asm/memory.h

Pull async changes from Tejun Heo:
 "These are followups for the earlier deadlock issue involving async
  ending up waiting for itself through block requesting module[1].  The
  following changes are made by these commits.

   - Instead of requesting default elevator on each request_queue init,
     block now requests it once early during boot.

   - Kmod triggers warning if invoked from an async worker.

   - Async synchronization implementation has been reimplemented.  It's
     a lot simpler now."

* 'for-3.9-async' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  async: initialise list heads to fix crash
  async: replace list of active domains with global list of pending items
  async: keep pending tasks on async_domain and remove async_pending
  async: use ULLONG_MAX for infinity cookie value
  async: bring sanity to the use of words domain and running
  async, kmod: warn on synchronous request_module() from async workers
  block: don't request module during elevator init
  init, block: try to load default elevator module early during boot

Prepare first set of updates for 3.9 merge window.

Pull workqueue changes from Tejun Heo:
 "A lot of reorganization is going on mostly to prepare for worker pools
  with custom attributes so that workqueue can replace custom pool
  implementations in places including writeback and btrfs and make CPU
  assignment in crypto more flexible.

  workqueue evolved from purely per-cpu design and implementation, so
  there are a lot of assumptions regarding being bound to CPUs and even
  unbound workqueues are implemented as an extension of the model -
  workqueues running on the special unbound CPU.  Bulk of changes this
  round are about promoting worker_pools as the top level abstraction
  replacing global_cwq (global cpu workqueue).  At this point, I'm
  fairly confident about getting custom worker pools working pretty soon
  and ready for the next merge window.

  Lai's patches are replacing the convoluted mb() dancing workqueue has
  been doing with much simpler mechanism which only depends on
  assignment atomicity of long.  For details, please read the commit
  message of 0b3dae68 ("workqueue: simplify is-work-item-queued-here
  test").  While the change ends up adding one pointer to struct
  delayed_work, the inflation in percentage is less than five percent
  and it decouples delayed_work logic a lot more cleaner from usual work
  handling, removes the unusual memory barrier dancing, and allows for
  further simplification, so I think the trade-off is acceptable.

  There will be two more workqueue related pull requests and there are
  some shared commits among them.  I'll write further pull requests
  assuming this pull request is pulled first."

* 'for-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (37 commits)
  workqueue: un-GPL function delayed_work_timer_fn()
  workqueue: rename cpu_workqueue to pool_workqueue
  workqueue: reimplement is_chained_work() using current_wq_worker()
  workqueue: fix is_chained_work() regression
  workqueue: pick cwq instead of pool in __queue_work()
  workqueue: make get_work_pool_id() cheaper
  workqueue: move nr_running into worker_pool
  workqueue: cosmetic update in try_to_grab_pending()
  workqueue: simplify is-work-item-queued-here test
  workqueue: make work->data point to pool after try_to_grab_pending()
  workqueue: add delayed_work->wq to simplify reentrancy handling
  workqueue: make work_busy() test WORK_STRUCT_PENDING first
  workqueue: replace WORK_CPU_NONE/LAST with WORK_CPU_END
  workqueue: post global_cwq removal cleanups
  workqueue: rename nr_running variables
  workqueue: remove global_cwq
  workqueue: remove worker_pool->gcwq
  workqueue: replace for_each_worker_pool() with for_each_std_worker_pool()
  workqueue: make freezing/thawing per-pool
  workqueue: make hotplug processing per-pool
  ...

Pull workqueue [delayed_]work_pending() cleanups from Tejun Heo:
 "This is part of on-going cleanups to remove / minimize usages of
  workqueue interfaces which are deprecated and/or misleading.

  This round drops a number of usages of [delayed_]work_pending(), which
  are dangerous as they lack any form of synchronization and thus often
  lead to buggy / unnecessary code.  There are a couple legitimate use
  cases in kernel.  Hopefully, they can be converted and
  [delayed_]work_pending() can be removed completely.  Even if not,
  removing most of misuses should make it more difficult to find
  examples of misuses and thus slow down growth of them.

  These changes are independent from other workqueue changes."

* 'for-3.9-cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  wimax/i2400m: fix i2400m->wake_tx_skb handling
  kprobes: fix wait_for_kprobe_optimizer()
  ipw2x00: simplify scan_event handling
  video/exynos: don't use [delayed_]work_pending()
  tty/max3100: don't use [delayed_]work_pending()
  x86/mce: don't use [delayed_]work_pending()
  rfkill: don't use [delayed_]work_pending()
  wl1251: don't use [delayed_]work_pending()
  thinkpad_acpi: don't use [delayed_]work_pending()
  mwifiex: don't use [delayed_]work_pending()
  sja1000: don't use [delayed_]work_pending()

Pull x86 UV3 support update from Ingo Molnar:
 "Support for the SGI Ultraviolet System 3 (UV3) platform - the upcoming
  third major iteration and upscaling of the SGI UV supercomputing
  platform."

* 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, uv, uv3: Trim MMR register definitions after code changes for SGI UV3
  x86, uv, uv3: Check current gru hub support for SGI UV3
  x86, uv, uv3: Update Time Support for SGI UV3
  x86, uv, uv3: Update x2apic Support for SGI UV3
  x86, uv, uv3: Update Hub Info for SGI UV3
  x86, uv, uv3: Update ACPI Check to include SGI UV3
  x86, uv, uv3: Update MMR register definitions for SGI Ultraviolet System 3 (UV3)

Pull x86 platform changes from Ingo Molnar:

 - Support for the Technologic Systems TS-5500 platform, by Vivien
   Didelot

 - Improved NUMA support on AMD systems:

   Add support for federated systems where multiple memory controllers
   can exist and see each other over multiple PCI domains.  This
   basically means that AMD node ids can be more than 8 now and the code
   handling this is taught to incorporate PCI domain into those IDs.

 - Support for the Goldfish virtual Android emulator, by Jun Nakajima,
   Intel, Google, et al.

 - Misc fixlets.

* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Add TS-5500 platform support
  x86/srat: Simplify memory affinity init error handling
  x86/apb/timer: Remove unnecessary "if"
  goldfish: platform device for x86
  amd64_edac: Fix type usage in NB IDs and memory ranges
  amd64_edac: Fix PCI function lookup
  x86, AMD, NB: Use u16 for northbridge IDs in amd_get_nb_id
  x86, AMD, NB: Add multi-domain support

Pull x86/hyperv changes from Ingo Molnar:
 "The biggest change is support for Windows 8's improved hypervisor
  interrupt model on the Linux Hyper-V guest subsystem code side.

  Smallish fixes otherwise."

* 'x86-hyperv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, hyperv: HYPERV depends on X86_LOCAL_APIC
  X86: Handle Hyper-V vmbus interrupts as special hypervisor interrupts
  X86: Add a check to catch Xen emulation of Hyper-V
  x86: Hyper-V: register clocksource only if its advertised

Pull x86/debug changes from Ingo Molnar:
 "Two init annotations and a built-in memtest speedup"

* 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/memtest: Shorten time for tests
  x86: Convert a few mistaken __cpuinit annotations to __init
  x86/EFI: Properly init-annotate BGRT code

Pull x86 cleanup patches from Ingo Molnar:
 "Misc smaller cleanups"

* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: ptrace.c only needs export.h and not the full module.h
  x86, apb_timer: remove unused variable percpu_timer
  um: don't compare a pointer to 0
  arch/x86/platform/uv: use ARRAY_SIZE where possible

Pull two x86 kernel build changes from Ingo Molnar:
 "The first change modifies how 'make oldconfig' works on cross-bitness
  situations on x86.  It was felt the new behavior of preserving the
  bitness of the .config is more logical.  This is a leftover of the
  merge.

  The second change eliminates a Perl warning.  (There's another, more
  complete fix resulting of this warning fix, which second fix in flight
  to you via the kbuild tree, which will remove the timeconst.pl script
  altogether.)"

* 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timeconst.pl: Eliminate Perl warning
  x86: Default to ARCH=x86 to avoid overriding CONFIG_64BIT

Pull x86 bootup changes from Ingo Molnar:
 "Deal with bootloaders which fail to initialize unknown fields in
  boot_params to zero, by sanitizing boot params passed in.

  This unbreaks versions of kexec-utils.  Other bootloaders do not
  appear to show sensitivity to this change, but it's a possibility for
  breakage nevertheless."

* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, boot: Sanitize boot_params if not zeroed on creation

Pull x86/asm changes from Ingo Molnar:
 "The biggest change (by line count) is the unification of the XOR code
  and then the introduction of an additional SSE based XOR assembly
  method.

  The other bigger change is the head_32.S rework/cleanup by Borislav
  Petkov.

  Last but not least there's the usual laundry list of small but
  dangerous (and hopefully perfectly tested) changes to subtle low level
  x86 code, plus cleanups."

* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, head_32: Give the 6 label a real name
  x86, head_32: Remove second CPUID detection from default_entry
  x86: Detect CPUID support early at boot
  x86, head_32: Remove i386 pieces
  x86: Require MOVBE feature in cpuid when we use it
  x86: Enable ARCH_USE_BUILTIN_BSWAP
  x86/xor: Add alternative SSE implementation only prefetching once per 64-byte line
  x86/xor: Unify SSE-base xor-block routines
  x86: Fix a typo
  x86/mm: Fix the argument passed to sync_global_pgds()
  x86/mm: Convert update_mmu_cache() and update_mmu_cache_pmd() to functions
  ix86: Tighten asmlinkage_protect() constraints

Pull x86/apic changes from Ingo Molnar:
 "Main changes:

   - Multiple MSI support added to the APIC, PCI and AHCI code - acked
     by all relevant maintainers, by Alexander Gordeev.

     The advantage is that multiple AHCI ports can have multiple MSI
     irqs assigned, and can thus spread to multiple CPUs.

     [ Drivers can make use of this new facility via the
       pci_enable_msi_block_auto() method ]

   - x86 IOAPIC code from interrupt remapping cleanups from Joerg
     Roedel:

     These patches move all interrupt remapping specific checks out of
     the x86 core code and replaces the respective call-sites with
     function pointers.  As a result the interrupt remapping code is
     better abstraced from x86 core interrupt handling code.

   - Various smaller improvements, fixes and cleanups."

* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits)
  x86/intel/irq_remapping: Clean up x2apic opt-out security warning mess
  x86, kvm: Fix intialization warnings in kvm.c
  x86, irq: Move irq_remapped out of x86 core code
  x86, io_apic: Introduce eoi_ioapic_pin call-back
  x86, msi: Introduce x86_msi.compose_msi_msg call-back
  x86, irq: Introduce setup_remapped_irq()
  x86, irq: Move irq_remapped() check into free_remapped_irq
  x86, io-apic: Remove !irq_remapped() check from __target_IO_APIC_irq()
  x86, io-apic: Move CONFIG_IRQ_REMAP code out of x86 core
  x86, irq: Add data structure to keep AMD specific irq remapping information
  x86, irq: Move irq_remapping_enabled declaration to iommu code
  x86, io_apic: Remove irq_remapping_enabled check in setup_timer_IRQ0_pin
  x86, io_apic: Move irq_remapping_enabled checks out of check_timer()
  x86, io_apic: Convert setup_ioapic_entry to function pointer
  x86, io_apic: Introduce set_affinity function pointer
  x86, msi: Use IRQ remapping specific setup_msi_irqs routine
  x86, hpet: Introduce x86_msi_ops.setup_hpet_msi
  x86, io_apic: Introduce x86_io_apic_ops.print_entries for debugging
  x86, io_apic: Introduce x86_io_apic_ops.disable()
  x86, apic: Mask IO-APIC and PIC unconditionally on LAPIC resume
  ...

Pull timer changes from Ingo Molnar:
 "Main changes:

   - ntp: Add CONFIG_RTC_SYSTOHC: a generic RTC driver facility
     complementing the existing CONFIG_RTC_HCTOSYS, which uses NTP to
     keep the hardware clock updated.

   - posix-timers: Fix clock_adjtime to always return timex data on
     success.  This is changing the ABI, but no breakage was expected
     and found - caution is warranted nevertheless.

   - platform persistent clock improvements/cleanups.

   - clockevents: refactor timer broadcast handling to be more generic
     and less duplicated with matching architecture code (mostly ARM
     motivated.)

   - various fixes and cleanups"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timers/x86/hpet: Use HPET_COUNTER to specify the hpet counter in vread_hpet()
  posix-cpu-timers: Fix nanosleep task_struct leak
  clockevents: Fix generic broadcast for FEAT_C3STOP
  time, Fix setting of hardware clock in NTP code
  hrtimer: Prevent hrtimer_enqueue_reprogram race
  clockevents: Add generic timer broadcast function
  clockevents: Add generic timer broadcast receiver
  timekeeping: Switch HAS_PERSISTENT_CLOCK to ALWAYS_USE_PERSISTENT_CLOCK
  x86/time/rtc: Don't print extended CMOS year when reading RTC
  x86: Select HAS_PERSISTENT_CLOCK on x86
  timekeeping: Add CONFIG_HAS_PERSISTENT_CLOCK option
  rtc: Skip the suspend/resume handling if persistent clock exist
  timekeeping: Add persistent_clock_exist flag
  posix-timers: Fix clock_adjtime to always return timex data on success
  Round the calculated scale factor in set_cyc2ns_scale()
  NTP: Add a CONFIG_RTC_SYSTOHC configuration
  MAINTAINERS: Update John Stultz's email
  time: create __getnstimeofday for WARNless calls

Pull preparatory smp/hotplug patches from Ingo Molnar:
 "Some early preparatory changes for the WIP hotplug rework by Thomas
  Gleixner."

* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  stop_machine: Use smpboot threads
  stop_machine: Store task reference in a separate per cpu variable
  smpboot: Allow selfparking per cpu threads

Pull scheduler changes from Ingo Molnar:
 "Main changes:

   - scheduler side full-dynticks (user-space execution is undisturbed
     and receives no timer IRQs) preparation changes that convert the
     cputime accounting code to be full-dynticks ready, from Frederic
     Weisbecker.

   - Initial sched.h split-up changes, by Clark Williams

   - select_idle_sibling() performance improvement by Mike Galbraith:

        " 1 tbench pair (worst case) in a 10 core + SMT package:

          pre   15.22 MB/sec 1 procs
          post 252.01 MB/sec 1 procs "

  - sched_rr_get_interval() ABI fix/change.  We think this detail is not
    used by apps (so it's not an ABI in practice), but lets keep it
    under observation.

  - misc RT scheduling cleanups, optimizations"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
  sched/rt: Add <linux/sched/rt.h> header to <linux/init_task.h>
  cputime: Remove irqsave from seqlock readers
  sched, powerpc: Fix sched.h split-up build failure
  cputime: Restore CPU_ACCOUNTING config defaults for PPC64
  sched/rt: Move rt specific bits into new header file
  sched/rt: Add a tuning knob to allow changing SCHED_RR timeslice
  sched: Move sched.h sysctl bits into separate header
  sched: Fix signedness bug in yield_to()
  sched: Fix select_idle_sibling() bouncing cow syndrome
  sched/rt: Further simplify pick_rt_task()
  sched/rt: Do not account zero delta_exec in update_curr_rt()
  cputime: Safely read cputime of full dynticks CPUs
  kvm: Prepare to add generic guest entry/exit callbacks
  cputime: Use accessors to read task cputime stats
  cputime: Allow dynamic switch between tick/virtual based cputime accounting
  cputime: Generic on-demand virtual cputime accounting
  cputime: Move default nsecs_to_cputime() to jiffies based cputime file
  cputime: Librarize per nsecs resolution cputime definitions
  cputime: Avoid multiplication overflow on utime scaling
  context_tracking: Export context state for generic vtime
  ...

Fix up conflict in kernel/context_tracking.c due to comment additions.

Pull perf changes from Ingo Molnar:
 "There are lots of improvements, the biggest changes are:

  Main kernel side changes:

   - Improve uprobes performance by adding 'pre-filtering' support, by
     Oleg Nesterov.

   - Make some POWER7 events available in sysfs, equivalent to what was
     done on x86, from Sukadev Bhattiprolu.

   - tracing updates by Steve Rostedt - mostly misc fixes and smaller
     improvements.

   - Use perf/event tracing to report PCI Express advanced errors, by
     Tony Luck.

   - Enable northbridge performance counters on AMD family 15h, by Jacob
     Shin.

   - This tracing commit:

        tracing: Remove the extra 4 bytes of padding in events

     changes the ABI.  All involved parties (PowerTop in particular)
     seem to agree that it's safe to do now with the introduction of
     libtraceevent, but the devil is in the details ...

  Main tooling side changes:

   - Add 'event group view', from Namyung Kim:

     To use it, 'perf record' should group events when recording.  And
     then perf report parses the saved group relation from file header
     and prints them together if --group option is provided.  You can
     use the 'perf evlist' command to see event group information:

        $ perf record -e '{ref-cycles,cycles}' noploop 1
        [ perf record: Woken up 2 times to write data ]
        [ perf record: Captured and wrote 0.385 MB perf.data (~16807 samples) ]

        $ perf evlist --group
        {ref-cycles,cycles}

     With this example, default perf report will show you each event
     separately.

     You can use --group option to enable event group view:

        $ perf report --group
        ...
        # group: {ref-cycles,cycles}
        # ========
        # Samples: 7K of event 'anon group { ref-cycles, cycles }'
        # Event count (approx.): 6876107743
        #
        #         Overhead  Command      Shared Object                      Symbol
        # ................  .......  .................  ..........................
            99.84%  99.76%  noploop  noploop            [.] main
             0.07%   0.00%  noploop  ld-2.15.so         [.] strcmp
             0.03%   0.00%  noploop  [kernel.kallsyms]  [k] timerqueue_del
             0.03%   0.03%  noploop  [kernel.kallsyms]  [k] sched_clock_cpu
             0.02%   0.00%  noploop  [kernel.kallsyms]  [k] account_user_time
             0.01%   0.00%  noploop  [kernel.kallsyms]  [k] __alloc_pages_nodemask
             0.00%   0.00%  noploop  [kernel.kallsyms]  [k] native_write_msr_safe
             0.00%   0.11%  noploop  [kernel.kallsyms]  [k] _raw_spin_lock
             0.00%   0.06%  noploop  [kernel.kallsyms]  [k] find_get_page
             0.00%   0.02%  noploop  [kernel.kallsyms]  [k] rcu_check_callbacks
             0.00%   0.02%  noploop  [kernel.kallsyms]  [k] __current_kernel_time

     As you can see the Overhead column now contains both of ref-cycles
     and cycles and header line shows group information also - 'anon
     group { ref-cycles, cycles }'.  The output is sorted by period of
     group leader first.

   - Initial GTK+ annotate browser, from Namhyung Kim.

   - Add option for runtime switching perf data file in perf report,
     just press 's' and a menu with the valid files found in the current
     directory will be presented, from Feng Tang.

   - Add support to display whole group data for raw columns, from Jiri
     Olsa.

   - Add per processor socket count aggregation in perf stat, from
     Stephane Eranian.

   - Add interval printing in 'perf stat', from Stephane Eranian.

   - 'perf test' improvements

   - Add support for wildcards in tracepoint system name, from Jiri
     Olsa.

   - Add anonymous huge page recognition, from Joshua Zhu.

   - perf build-id cache now can show DSOs present in a perf.data file
     that are not in the cache, to integrate with build-id servers being
     put in place by organizations such as Fedora.

   - perf top now shares more of the evsel config/creation routines with
     'record', paving the way for further integration like 'top'
     snapshots, etc.

   - perf top now supports DWARF callchains.

   - Fix mmap limitations on 32-bit, fix from David Miller.

   - 'perf bench numa mem' NUMA performance measurement suite

   - ... and lots of fixes, performance improvements, cleanups and other
     improvements I failed to list - see the shortlog and git log for
     details."

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (270 commits)
  perf/x86/amd: Enable northbridge performance counters on AMD family 15h
  perf/hwbp: Fix cleanup in case of kzalloc failure
  perf tools: Fix build with bison 2.3 and older.
  perf tools: Limit unwind support to x86 archs
  perf annotate: Make it to be able to skip unannotatable symbols
  perf gtk/annotate: Fail early if it can't annotate
  perf gtk/annotate: Show source lines with gray color
  perf gtk/annotate: Support multiple event annotation
  perf ui/gtk: Implement basic GTK2 annotation browser
  perf annotate: Fix warning message on a missing vmlinux
  perf buildid-cache: Add --update option
  uprobes/perf: Avoid uprobe_apply() whenever possible
  uprobes/perf: Teach trace_uprobe/perf code to use UPROBE_HANDLER_REMOVE
  uprobes/perf: Teach trace_uprobe/perf code to pre-filter
  uprobes/perf: Teach trace_uprobe/perf code to track the active perf_event's
  uprobes: Introduce uprobe_apply()
  perf: Introduce hw_perf_event->tp_target and ->tp_list
  uprobes/perf: Always increment trace_uprobe->nhit
  uprobes/tracing: Kill uprobe_trace_consumer, embed uprobe_consumer into trace_uprobe
  uprobes/tracing: Introduce is_trace_uprobe_enabled()
  ...

Pull irq core changes from Ingo Molnar:
 "The biggest changes are the IRQ-work and printk changes from Frederic
  Weisbecker, which prepare the code for 'full dynticks' (the ability to
  stop or slow down the periodic tick arbitrarily, not just in idle time
  as today):

   - Don't stop tick with irq works pending.  This fix is generally
     useful and concerns archs that can't raise self IPIs.

   - Flush irq works before CPU offlining.

   - Introduce "lazy" irq works that can wait for the next tick to be
     executed, unless it's stopped.

   - Implement klogd wake up using irq work.  This removes the ad-hoc
     printk_tick()/printk_needs_cpu() hooks and make it working even in
     dynticks mode.

   - Cleanups and fixes."

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: Export enable/disable_percpu_irq()
  arch Kconfig: Remove references to IRQ_PER_CPU
  irq_work: Remove return value from the irq_work_queue() function
  genirq: Avoid deadlock in spurious handling
  printk: Wake up klogd using irq_work
  irq_work: Make self-IPIs optable
  irq_work: Warn if there's still work on cpu_down
  irq_work: Flush work on CPU_DYING
  irq_work: Don't stop the tick with pending works
  nohz: Add API to check tick state
  irq_work: Remove CONFIG_HAVE_IRQ_WORK
  irq_work: Fix racy check on work pending flag
  irq_work: Fix racy IRQ_WORK_BUSY flag setting

Pull RCU changes from Ingo Molnar:
 "SRCU changes:

   - These include debugging aids, updates that move towards the goal of
     permitting srcu_read_lock() and srcu_read_unlock() to be used from
     idle and offline CPUs, and a few small fixes.

  Changes to rcutorture and to RCU documentation:

   - Posted to LKML at https://lkml.org/lkml/2013/1/26/188

  Enhancements to uniprocessor handling in tiny RCU:

   - Posted to LKML at https://lkml.org/lkml/2013/1/27/2

  Tag RCU callbacks with grace-period number to simplify callback
  advancement:

   - Posted to LKML at https://lkml.org/lkml/2013/1/26/203

  Miscellaneous fixes:

   - Posted to LKML at https://lkml.org/lkml/2013/1/26/204"

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
  srcu: use ACCESS_ONCE() to access sp->completed in srcu_read_lock()
  srcu: Update synchronize_srcu_expedited()'s comments
  srcu: Update synchronize_srcu()'s comments
  srcu: Remove checks preventing idle CPUs from calling srcu_read_lock()
  srcu: Remove checks preventing offline CPUs from calling srcu_read_lock()
  srcu: Simple cleanup for cleanup_srcu_struct()
  srcu: Add might_sleep() annotation to synchronize_srcu()
  srcu: Simplify __srcu_read_unlock() via this_cpu_dec()
  rcu: Allow rcutorture to be built at low optimization levels
  rcu: Make rcutorture's shuffler task shuffle recently added tasks
  rcu: Allow TREE_PREEMPT_RCU on UP systems
  rcu: Provide RCU CPU stall warnings for tiny RCU
  context_tracking: Add comments on interface and internals
  rcu: Remove obsolete Kconfig option from comment
  rcu: Remove unused code originally used for context tracking
  rcu: Consolidate debugging Kconfig options
  rcu: Correct 'optimized' to 'optimize' in header comment
  rcu: Trace callback acceleration
  rcu: Tag callback lists with corresponding grace-period number
  rcutorture: Don't compare ptr with 0
  ...

Fixes the following sparse warnings:
drivers/hwmon/ntc_thermistor.c:46:31: warning:
symbol 'ncpXXwb473' was not declared. Should it be static?
drivers/hwmon/ntc_thermistor.c:82:31: warning:
symbol 'ncpXXwl333' was not declared. Should it be static?

Cc: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

The adt7420 is software compatible to the adt7410.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Use the I2C_ADDRS macro to initialize the I2C device's address_list. Doing so
saves a few lines of boilerplate code.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>