1. 05 Jun, 2017 5 commits
    • Kim Phillips's avatar
      perf annotate: Add missing powerpc triplet · 6db47fde
      Kim Phillips authored
      On an Ubuntu xenial system, 'perf annotate' says to install powerpc
      objdump on a system that already has binutils-powerpc-linux-gnu
      installed.  Make perf aware of the missing triplet for the
      powerpc-linux-gnu target.
      Signed-off-by: default avatarKim Phillips <kim.phillips@arm.com>
      Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
      Cc: He Kuang <hekuang@huawei.com>
      Cc: Jiri Olsa <jolsa@kernel.org>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
      Link: http://lkml.kernel.org/r/20170529142754.7fbfb1152fd8f2663de0ea70@arm.comSigned-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      6db47fde
    • Jiri Olsa's avatar
      perf test: Disable breakpoint signal tests for powerpc · 598762cf
      Jiri Olsa authored
      The following tests are failing on powerpc:
      
        # perf test break
        18: Breakpoint overflow signal handler  : FAILED!
        19: Breakpoint overflow sampling        : FAILED!
      
      The powerpc kenel so far does not have support to even create
      instruction breakpoints using the perf event interface, so those tests
      fail early in the config phase.
      
      I added a '->is_supported()' callback to test struct to be able to
      disable specific tests. It seems better than putting ifdefs directly to
      the test array.
      Signed-off-by: default avatarJiri Olsa <jolsa@kernel.org>
      Cc: David Ahern <dsahern@gmail.com>
      Cc: Namhyung Kim <namhyung@kernel.org>
      Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
      Link: http://lkml.kernel.org/r/20170601205450.GA398@kravaSigned-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      598762cf
    • Namhyung Kim's avatar
      perf symbols: Use correct filename for compressed modules in build-id cache · a09935b8
      Namhyung Kim authored
      The decompress_kmodule() decompresses kernel modules in order to load
      symbols from it.  In the DSO_BINARY_TYPE__BUILD_ID_CACHE case, it needs
      the full file path to extract the file extension to determine the
      decompression method.  But overwriting 'name' will fail the
      decompression since it might point to a non-existing old file.
      
      Instead, use dso->long_name for having the correct extension and use the
      real filename to decompress.
      
      In the DSO_BINARY_TYPE__SYSTEM_PATH_KMODULE_COMP case, both names should
      be the same.  This allows resolving symbols in the old modules.
      
      Before:
      
        $ perf report -i perf.data.old | grep scsi_mod
           0.00%  cc1      [scsi_mod]    [k] 0x0000000000004aa6
           0.00%  as       [scsi_mod]    [k] 0x00000000000099e1
           0.00%  cc1      [scsi_mod]    [k] 0x0000000000009830
           0.00%  cc1      [scsi_mod]    [k] 0x0000000000001b8f
      
      After:
      
           0.00%  cc1      [scsi_mod]    [k] scsi_handle_queue_ramp_up
           0.00%  as       [scsi_mod]    [k] scsi_sg_alloc
           0.00%  cc1      [scsi_mod]    [k] scsi_setup_cmnd
           0.00%  cc1      [scsi_mod]    [k] scsi_get_command
      Signed-off-by: default avatarNamhyung Kim <namhyung@kernel.org>
      Acked-by: default avatarJiri Olsa <jolsa@kernel.org>
      Cc: Andi Kleen <andi@firstfloor.org>
      Cc: David Ahern <dsahern@gmail.com>
      Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: kernel-team@lge.com
      Link: http://lkml.kernel.org/r/20170531120105.21731-3-namhyung@kernel.orgSigned-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      a09935b8
    • Namhyung Kim's avatar
      perf symbols: Set module info when build-id event found · 6b335e8f
      Namhyung Kim authored
      Like machine__findnew_module_dso(), it should set necessary info for
      kernel modules to find symbol info from the file.  Factor out
      dso__set_module_info() to do it.
      
      This is needed for dso__needs_decompress() to detect such DSOs.
      Signed-off-by: default avatarNamhyung Kim <namhyung@kernel.org>
      Acked-by: default avatarJiri Olsa <jolsa@kernel.org>
      Cc: Andi Kleen <andi@firstfloor.org>
      Cc: David Ahern <dsahern@gmail.com>
      Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: kernel-team@lge.com
      Link: http://lkml.kernel.org/r/20170531120105.21731-2-namhyung@kernel.orgSigned-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      6b335e8f
    • Namhyung Kim's avatar
      perf header: Set proper module name when build-id event found · 1deec1bd
      Namhyung Kim authored
      When perf processes build-id event, it creates DSOs with the build-id.
      But it didn't set the module short name (like '[module-name]') so when
      processing a kernel mmap event of the module, it cannot found the DSO as
      it only checks the short names.
      
      That leads for perf to create a same DSO without the build-id info and
      it'll lookup the system path even if the DSO is already in the build-id
      cache.  After kernel was updated, perf cannot find the DSO  and cannot
      show symbols in it anymore.
      
      You can see this if you have an old data file (w/ old kernel version):
      
        $ perf report -i perf.data.old -v |& grep scsi_mod
        build id event received for /lib/modules/3.19.2-1-ARCH/kernel/drivers/scsi/scsi_mod.ko.gz : cafe1ce6ca13a98a5d9ed3425cde249e57a27fc1
        Failed to open /lib/modules/3.19.2-1-ARCH/kernel/drivers/scsi/scsi_mod.ko.gz, continuing without symbols
        ...
      
      The second message didn't show the build-id.  With this patch:
      
        $ perf report -i perf.data.old -v |& grep scsi_mod
        build id event received for /lib/modules/3.19.2-1-ARCH/kernel/drivers/scsi/scsi_mod.ko.gz: cafe1ce6ca13a98a5d9ed3425cde249e57a27fc1
        /lib/modules/3.19.2-1-ARCH/kernel/drivers/scsi/scsi_mod.ko.gz with build id cafe1ce6ca13a98a5d9ed3425cde249e57a27fc1 not found, continuing without symbols
        ...
      
      Now it shows the build-id but still cannot load the symbol table.  This
      is a different problem which will be fixed in the next patch.
      Signed-off-by: default avatarNamhyung Kim <namhyung@kernel.org>
      Acked-by: default avatarJiri Olsa <jolsa@kernel.org>
      Cc: Andi Kleen <andi@firstfloor.org>
      Cc: David Ahern <dsahern@gmail.com>
      Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: kernel-team@lge.com
      Link: http://lkml.kernel.org/r/20170531120105.21731-1-namhyung@kernel.org
      [ Fix the build on older compilers (debian <= 8, fedora <= 21, etc) wrt kmod_path var init ]
      Signed-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      1deec1bd
  2. 02 Jun, 2017 1 commit
  3. 01 Jun, 2017 2 commits
    • Kim Phillips's avatar
      perf annotate: Fix branch instruction with multiple operands · b13bbeee
      Kim Phillips authored
      'perf annotate' is dropping the cr* fields from branch instructions.
      
      Fix it by adding support to display branch instructions having
      multiple operands.
      
      Power Arch objdump of int_sqrt:
      
       20.36 | c0000000004d2694:   subf   r10,r10,r3
             | c0000000004d2698: v bgt    cr6,c0000000004d26a0 <int_sqrt+0x40>
        1.82 | c0000000004d269c:   mr     r3,r10
       29.18 | c0000000004d26a0:   mr     r10,r8
             | c0000000004d26a4: v bgt    cr7,c0000000004d26ac <int_sqrt+0x4c>
             | c0000000004d26a8:   mr     r10,r7
      
      Power Arch Before Patch:
      
       20.36 |       subf   r10,r10,r3
             |     v bgt    40
        1.82 |       mr     r3,r10
       29.18 | 40:   mr     r10,r8
             |     v bgt    4c
             |       mr     r10,r7
      
      Power Arch After patch:
      
       20.36 |       subf   r10,r10,r3
             |     v bgt    cr6,40
        1.82 |       mr     r3,r10
       29.18 | 40:   mr     r10,r8
             |     v bgt    cr7,4c
             |       mr     r10,r7
      
      Also support AArch64 conditional branch instructions, which can
      have up to three operands:
      
      Aarch64 Non-simplified (raw objdump) view:
      
             │ffff0000083cd11c: ↑ cbz    w0, ffff0000083cd100 <security_fil▒
      ...
        4.44 │ffff000│083cd134: ↓ tbnz   w0, #26, ffff0000083cd190 <securit▒
      ...
        1.37 │ffff000│083cd144: ↓ tbnz   w22, #5, ffff0000083cd1a4 <securit▒
             │ffff000│083cd148:   mov    w19, #0x20000                   //▒
        1.02 │ffff000│083cd14c: ↓ tbz    w22, #2, ffff0000083cd1ac <securit▒
      ...
        0.68 │ffff000└──3cd16c: ↑ cbnz   w0, ffff0000083cd120 <security_fil▒
      
      Aarch64 Simplified, before this patch:
      
             │    ↑ cbz    40
      ...
        4.44 │   │↓ tbnz   w0, #26, ffff0000083cd190 <security_file_permiss▒
      ...
        1.37 │   │↓ tbnz   w22, #5, ffff0000083cd1a4 <security_file_permiss▒
             │   │  mov    w19, #0x20000                   // #131072
        1.02 │   │↓ tbz    w22, #2, ffff0000083cd1ac <security_file_permiss▒
      ...
        0.68 │   └──cbnz   60
      
      the cbz operand is missing, and the tbz doesn't get simplified processing
      at all because the parsing function failed to match an address.
      
      Aarch64 Simplified, After this patch applied:
      
             │    ↑ cbz    w0, 40
      ...
        4.44 │   │↓ tbnz   w0, #26, d0
      ...
        1.37 │   │↓ tbnz   w22, #5, e4
             │   │  mov    w19, #0x20000                   // #131072
        1.02 │   │↓ tbz    w22, #2, ec
      ...
        0.68 │   └──cbnz   w0, 60
      Originally-by: default avatarRavi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
      Tested-by: default avatarRavi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
      Reported-by: default avatarAnton Blanchard <anton@samba.org>
      Reported-by: default avatarRobin Murphy <robin.murphy@arm.com>
      Signed-off-by: default avatarKim Phillips <kim.phillips@arm.com>
      Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
      Cc: Christian Borntraeger <borntraeger@de.ibm.com>
      Cc: Mark Rutland <mark.rutland@arm.com>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Taeung Song <treeze.taeung@gmail.com>
      Link: http://lkml.kernel.org/r/20170601092959.f60d98912e8a1b66fd1e4c0e@arm.comSigned-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      b13bbeee
    • Jiri Olsa's avatar
      perf trace: Add mmap alias for s390 · 54265664
      Jiri Olsa authored
      The s390 architecture maps sys_mmap (nr 90) into sys_old_mmap.  For this
      reason perf trace can't find the proper syscall event to get args format
      from and displays it wrongly as 'continued'.
      
      To fix that fill the "alias" field with "old_mmap" for trace's mmap record
      to get the correct translation.
      
      Before:
           0.042 ( 0.011 ms): vest/43052 fstat(statbuf: 0x3ffff89fd90                ) = 0
           0.042 ( 0.028 ms): vest/43052  ... [continued]: mmap()) = 0x3fffd6e2000
           0.072 ( 0.025 ms): vest/43052 read(buf: 0x3fffd6e2000, count: 4096        ) = 6
      
      After:
           0.045 ( 0.011 ms): fstat(statbuf: 0x3ffff8a0930                           ) = 0
           0.057 ( 0.018 ms): mmap(arg: 0x3ffff8a0858                                ) = 0x3fffd14a000
           0.076 ( 0.025 ms): read(buf: 0x3fffd14a000, count: 4096                   ) = 6
      Signed-off-by: default avatarJiri Olsa <jolsa@kernel.org>
      Cc: David Ahern <dsahern@gmail.com>
      Cc: Namhyung Kim <namhyung@kernel.org>
      Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
      Link: http://lkml.kernel.org/r/20170531113557.19175-1-jolsa@kernel.orgSigned-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      54265664
  4. 27 May, 2017 1 commit
  5. 24 May, 2017 8 commits
    • Ingo Molnar's avatar
      tools/include: Sync kernel ABI headers with tooling headers · 6e30437b
      Ingo Molnar authored
      Sync (copy) the following v4.12 kernel headers to the tooling headers:
      
        arch/x86/include/asm/disabled-features.h:
        arch/x86/include/uapi/asm/kvm.h:
        arch/powerpc/include/uapi/asm/kvm.h:
        arch/s390/include/uapi/asm/kvm.h:
        arch/arm/include/uapi/asm/kvm.h:
        arch/arm64/include/uapi/asm/kvm.h:
      
         - 'struct kvm_sync_regs' got changed in an ABI-incompatible way,
           fortunately none of the (in-kernel) tooling relied on it
      
         - new KVM_DEV calls added
      
        arch/x86/include/asm/required-features.h:
      
         - 5-level paging hardware ABI detail added
      
        arch/x86/include/asm/cpufeatures.h:
      
         - new CPU feature added
      
        arch/x86/include/uapi/asm/vmx.h:
      
         - new VMX exit conditions
      
      None of the changes requires fixes in the tooling source code.
      
      This addresses the following warnings:
      
        Warning: include/uapi/linux/stat.h differs from kernel
        Warning: arch/x86/include/asm/disabled-features.h differs from kernel
        Warning: arch/x86/include/asm/required-features.h differs from kernel
        Warning: arch/x86/include/asm/cpufeatures.h differs from kernel
        Warning: arch/x86/include/uapi/asm/kvm.h differs from kernel
        Warning: arch/x86/include/uapi/asm/vmx.h differs from kernel
        Warning: arch/powerpc/include/uapi/asm/kvm.h differs from kernel
        Warning: arch/s390/include/uapi/asm/kvm.h differs from kernel
        Warning: arch/arm/include/uapi/asm/kvm.h differs from kernel
        Warning: arch/arm64/include/uapi/asm/kvm.h differs from kernel
      
      Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
      Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
      Cc: Jiri Olsa <jolsa@kernel.org>
      Cc: Jiri Olsa <jolsa@redhat.com>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Cc: Milian Wolff <milian.wolff@kdab.com>
      Cc: Namhyung Kim <namhyung@kernel.org>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Yao Jin <yao.jin@linux.intel.com>
      Cc: kernel-team@lge.com
      Link: http://lkml.kernel.org/r/20170524065721.j2mlch6bgk5klgbc@gmail.comSigned-off-by: default avatarIngo Molnar <mingo@kernel.org>
      6e30437b
    • Namhyung Kim's avatar
      perf tools: Put caller above callee in --children mode · 7111ffff
      Namhyung Kim authored
      The __hpp__sort_acc() sorts entries using callchain depth in order to
      put callers above in children mode.  But it assumed the callchain order
      was callee-first.  Now default (for children) is caller-first so the
      order of entries is reverted.
      
      For example, consider following case:
      
        $ perf report --no-children
        ..l
        # Overhead  Command  Shared Object        Symbol
        # ........  .......  ...................  ..........................
        #
            99.44%  a.out    a.out                [.] main
                    |
                    ---main
                       __libc_start_main
                       _start
      
      Then children mode should show 'start' above '__libc_start_main' since
      it's the caller (parent) of the __libc_start_main.  But it's reversed:
      
        # Children      Self  Command  Shared Object    Symbol
        # ........  ........  .......  ...............  .....................
        #
            99.61%     0.00%  a.out    libc-2.25.so     [.] __libc_start_main
            99.61%     0.00%  a.out    a.out            [.] _start
            99.54%    99.44%  a.out    a.out            [.] main
      
      This patch fixes it.
      
        # Children      Self  Command  Shared Object    Symbol
        # ........  ........  .......  ...............  .....................
        #
            99.61%     0.00%  a.out    a.out            [.] _start
            99.61%     0.00%  a.out    libc-2.25.so     [.] __libc_start_main
            99.54%    99.44%  a.out    a.out            [.] main
      Signed-off-by: default avatarNamhyung Kim <namhyung@kernel.org>
      Acked-by: default avatarJiri Olsa <jolsa@kernel.org>
      Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
      Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
      Cc: Frederic Weisbecker <fweisbec@gmail.com>
      Cc: Jiri Olsa <jolsa@redhat.com>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Cc: Milian Wolff <milian.wolff@kdab.com>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Yao Jin <yao.jin@linux.intel.com>
      Cc: kernel-team@lge.com
      Link: http://lkml.kernel.org/r/20170524062129.32529-8-namhyung@kernel.orgSigned-off-by: default avatarIngo Molnar <mingo@kernel.org>
      7111ffff
    • Milian Wolff's avatar
      perf report: Do not drop last inlined frame · 4d53b9d5
      Milian Wolff authored
      The very last inlined frame, i.e. the one furthest away from the
      non-inlined frame, was silently dropped. This is apparent when
      comparing the output of `perf script` and `addr2line`:
      
      ~~~~~~
        $ perf script --inline
        ...
        a.out 26722 80836.309329:      72425 cycles:
                           21561 __hypot_finite (/usr/lib/libm-2.25.so)
                            ace3 hypot (/usr/lib/libm-2.25.so)
                             a4a main (a.out)
                                 std::abs<double>
                                 std::_Norm_helper<true>::_S_do_it<double>
                                 std::norm<double>
                                 main
                           20510 __libc_start_main (/usr/lib/libc-2.25.so)
                             bd9 _start (a.out)
      
        $ addr2line -a -f -i -e /tmp/a.out a4a | c++filt
        0x0000000000000a4a
        std::__complex_abs(doublecomplex )
        /usr/include/c++/6.3.1/complex:589
        double std::abs<double>(std::complex<double> const&)
        /usr/include/c++/6.3.1/complex:597
        double std::_Norm_helper<true>::_S_do_it<double>(std::complex<double> const&)
        /usr/include/c++/6.3.1/complex:654
        double std::norm<double>(std::complex<double> const&)
        /usr/include/c++/6.3.1/complex:664
        main
        /tmp/inlining.cpp:14
      ~~~~~
      
      Note how `std::__complex_abs` is missing from the `perf script`
      output. This is similarly showing up in `perf report`. The patch
      here fixes this issue, and the output becomes:
      
      ~~~~~
        a.out 26722 80836.309329:      72425 cycles:
                           21561 __hypot_finite (/usr/lib/libm-2.25.so)
                            ace3 hypot (/usr/lib/libm-2.25.so)
                             a4a main (a.out)
                                 std::__complex_abs
                                 std::abs<double>
                                 std::_Norm_helper<true>::_S_do_it<double>
                                 std::norm<double>
                                 main
                           20510 __libc_start_main (/usr/lib/libc-2.25.so)
                             bd9 _start (a.out)
      ~~~~~
      Signed-off-by: default avatarMilian Wolff <milian.wolff@kdab.com>
      Signed-off-by: default avatarNamhyung Kim <namhyung@kernel.org>
      Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
      Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
      Cc: David Ahern <dsahern@gmail.com>
      Cc: Jiri Olsa <jolsa@kernel.org>
      Cc: Jiri Olsa <jolsa@redhat.com>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Yao Jin <yao.jin@linux.intel.com>
      Cc: kernel-team@lge.com
      Link: http://lkml.kernel.org/r/20170524062129.32529-7-namhyung@kernel.orgSigned-off-by: default avatarIngo Molnar <mingo@kernel.org>
      4d53b9d5
    • Milian Wolff's avatar
      perf report: Always honor callchain order for inlined nodes · 28071f51
      Milian Wolff authored
      So far, the inlined nodes where only reversed when we built perf
      against libbfd. If that was not available, the addr2line fallback
      code path was missing the inline_list__reverse call.
      
      Now we always add the nodes in the correct order within
      inline_list__append. This removes the need to reverse the list
      and also ensures that all callers construct the list in the right
      order.
      Signed-off-by: default avatarMilian Wolff <milian.wolff@kdab.com>
      Signed-off-by: default avatarNamhyung Kim <namhyung@kernel.org>
      Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
      Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
      Cc: David Ahern <dsahern@gmail.com>
      Cc: Jiri Olsa <jolsa@kernel.org>
      Cc: Jiri Olsa <jolsa@redhat.com>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Yao Jin <yao.jin@linux.intel.com>
      Cc: kernel-team@lge.com
      Link: http://lkml.kernel.org/r/20170524062129.32529-6-namhyung@kernel.orgSigned-off-by: default avatarIngo Molnar <mingo@kernel.org>
      28071f51
    • Namhyung Kim's avatar
      perf script: Add --inline option for debugging · 325fbff5
      Namhyung Kim authored
      The --inline option is to show inlined functions in callchains.
      
      For example:
      
        $ perf script
        a.out  5644 11611.467597:     309961 cycles:u:
                           790 main (/home/namhyung/tmp/perf/a.out)
                         20511 __libc_start_main (/usr/lib/libc-2.25.so)
                           8ba _start (/home/namhyung/tmp/perf/a.out)
        ...
      
        $ perf script --inline
        a.out  5644 11611.467597:     309961 cycles:u:
                           790 main (/home/namhyung/tmp/perf/a.out)
                               std::__detail::_Adaptor<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul>, double>::operator()
                               std::uniform_real_distribution<double>::operator()<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul> >
                               std::uniform_real_distribution<double>::operator()<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul> >
                               main
                         20511 __libc_start_main (/usr/lib/libc-2.25.so)
                           8ba _start (/home/namhyung/tmp/perf/a.out)
        ...
      Reviewed-and-tested-by: default avatarMilian Wolff <milian.wolff@kdab.com>
      Signed-off-by: default avatarNamhyung Kim <namhyung@kernel.org>
      Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
      Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
      Cc: Jin Yao <yao.jin@linux.intel.com>
      Cc: Jiri Olsa <jolsa@kernel.org>
      Cc: Jiri Olsa <jolsa@redhat.com>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Cc: Milian Wolff <milian.wolff@kdab.com>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: kernel-team@lge.com
      Link: http://lkml.kernel.org/r/20170524062129.32529-5-namhyung@kernel.orgSigned-off-by: default avatarIngo Molnar <mingo@kernel.org>
      325fbff5
    • Milian Wolff's avatar
      perf report: Fix off-by-one for non-activation frames · 1982ad48
      Milian Wolff authored
      As the documentation for dwfl_frame_pc says, frames that
      are no activation frames need to have their program counter
      decremented by one to properly find the function of the caller.
      
      This fixes many cases where perf report currently attributes
      the cost to the next line. I.e. I have code like this:
      
      ~~~~~~~~~~~~~~~
        #include <thread>
        #include <chrono>
      
        using namespace std;
      
        int main()
        {
          this_thread::sleep_for(chrono::milliseconds(1000));
          this_thread::sleep_for(chrono::milliseconds(100));
          this_thread::sleep_for(chrono::milliseconds(10));
      
          return 0;
        }
      ~~~~~~~~~~~~~~~
      
      Now compile and record it:
      
      ~~~~~~~~~~~~~~~
        g++ -std=c++11 -g -O2 test.cpp
        echo 1 | sudo tee /proc/sys/kernel/sched_schedstats
        perf record \
          --event sched:sched_stat_sleep \
          --event sched:sched_process_exit \
          --event sched:sched_switch --call-graph=dwarf \
          --output perf.data.raw \
          ./a.out
        echo 0 | sudo tee /proc/sys/kernel/sched_schedstats
        perf inject --sched-stat --input perf.data.raw --output perf.data
      ~~~~~~~~~~~~~~~
      
      Before this patch, the report clearly shows the off-by-one issue.
      Most notably, the last sleep invocation is incorrectly attributed
      to the "return 0;" line:
      
      ~~~~~~~~~~~~~~~
        Overhead  Source:Line
        ........  ...........
      
         100.00%  core.c:0
                  |
                  ---__schedule core.c:0
                     schedule
                     do_nanosleep hrtimer.c:0
                     hrtimer_nanosleep
                     sys_nanosleep
                     entry_SYSCALL_64_fastpath .tmp_entry_64.o:0
                     __nanosleep_nocancel .:0
                     std::this_thread::sleep_for<long, std::ratio<1l, 1000l> > thread:323
                     |
                     |--90.08%--main test.cpp:9
                     |          __libc_start_main
                     |          _start
                     |
                     |--9.01%--main test.cpp:10
                     |          __libc_start_main
                     |          _start
                     |
                      --0.91%--main test.cpp:13
                                __libc_start_main
                                _start
      ~~~~~~~~~~~~~~~
      
      With this patch here applied, the issue is fixed. The report becomes
      much more usable:
      
      ~~~~~~~~~~~~~~~
        Overhead  Source:Line
        ........  ...........
      
         100.00%  core.c:0
                  |
                  ---__schedule core.c:0
                     schedule
                     do_nanosleep hrtimer.c:0
                     hrtimer_nanosleep
                     sys_nanosleep
                     entry_SYSCALL_64_fastpath .tmp_entry_64.o:0
                     __nanosleep_nocancel .:0
                     std::this_thread::sleep_for<long, std::ratio<1l, 1000l> > thread:323
                     |
                     |--90.08%--main test.cpp:8
                     |          __libc_start_main
                     |          _start
                     |
                     |--9.01%--main test.cpp:9
                     |          __libc_start_main
                     |          _start
                     |
                      --0.91%--main test.cpp:10
                                __libc_start_main
                                _start
      ~~~~~~~~~~~~~~~
      
      Similarly it works for signal frames:
      
      ~~~~~~~~~~~~~~~
        __noinline void bar(void)
        {
          volatile long cnt = 0;
      
          for (cnt = 0; cnt < 100000000; cnt++);
        }
      
        __noinline void foo(void)
        {
          bar();
        }
      
        void sig_handler(int sig)
        {
          foo();
        }
      
        int main(void)
        {
          signal(SIGUSR1, sig_handler);
          raise(SIGUSR1);
      
          foo();
          return 0;
        }
      ~~~~~~~~~~~~~~~~
      
      Before, the report wrongly points to `signal.c:29` after raise():
      
      ~~~~~~~~~~~~~~~~
        $ perf report --stdio --no-children -g srcline -s srcline
        ...
         100.00%  signal.c:11
                  |
                  ---bar signal.c:11
                     |
                     |--50.49%--main signal.c:29
                     |          __libc_start_main
                     |          _start
                     |
                      --49.51%--0x33a8f
                                raise .:0
                                main signal.c:29
                                __libc_start_main
                                _start
      ~~~~~~~~~~~~~~~~
      
      With this patch in, the issue is fixed and we instead get:
      
      ~~~~~~~~~~~~~~~~
         100.00%  signal   signal            [.] bar
                  |
                  ---bar signal.c:11
                     |
                     |--50.49%--main signal.c:29
                     |          __libc_start_main
                     |          _start
                     |
                      --49.51%--0x33a8f
                                raise .:0
                                main signal.c:27
                                __libc_start_main
                                _start
      ~~~~~~~~~~~~~~~~
      
      Note how this patch fixes this issue for both unwinding methods, i.e.
      both dwfl and libunwind. The former case is straight-forward thanks
      to dwfl_frame_pc(). For libunwind, we replace the functionality via
      unw_is_signal_frame() for any but the very first frame.
      Signed-off-by: default avatarMilian Wolff <milian.wolff@kdab.com>
      Signed-off-by: default avatarNamhyung Kim <namhyung@kernel.org>
      Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
      Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
      Cc: David Ahern <dsahern@gmail.com>
      Cc: Jiri Olsa <jolsa@kernel.org>
      Cc: Jiri Olsa <jolsa@redhat.com>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Yao Jin <yao.jin@linux.intel.com>
      Cc: kernel-team@lge.com
      Link: http://lkml.kernel.org/r/20170524062129.32529-4-namhyung@kernel.orgSigned-off-by: default avatarIngo Molnar <mingo@kernel.org>
      1982ad48
    • Milian Wolff's avatar
      perf report: Fix memory leak in addr2line when called by addr2inlines · b21cc978
      Milian Wolff authored
      When a filename was found in addr2line it was duplicated via strdup()
      but never freed. Now we pass NULL and handle this gracefully in
      addr2line.
      
      Detected by Valgrind:
      
        ==16331== 1,680 bytes in 21 blocks are definitely lost in loss record 148 of 220
        ==16331==    at 0x4C2AF1F: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
        ==16331==    by 0x672FA69: strdup (in /usr/lib/libc-2.25.so)
        ==16331==    by 0x52769F: addr2line (srcline.c:256)
        ==16331==    by 0x52769F: addr2inlines (srcline.c:294)
        ==16331==    by 0x52769F: dso__parse_addr_inlines (srcline.c:502)
        ==16331==    by 0x574D7A: inline__fprintf (hist.c:41)
        ==16331==    by 0x574D7A: ipchain__fprintf_graph (hist.c:147)
        ==16331==    by 0x57518A: __callchain__fprintf_graph (hist.c:212)
        ==16331==    by 0x5753CF: callchain__fprintf_graph.constprop.6 (hist.c:337)
        ==16331==    by 0x57738E: hist_entry__fprintf (hist.c:628)
        ==16331==    by 0x57738E: hists__fprintf (hist.c:882)
        ==16331==    by 0x44A20F: perf_evlist__tty_browse_hists (builtin-report.c:399)
        ==16331==    by 0x44A20F: report__browse_hists (builtin-report.c:491)
        ==16331==    by 0x44A20F: __cmd_report (builtin-report.c:624)
        ==16331==    by 0x44A20F: cmd_report (builtin-report.c:1054)
        ==16331==    by 0x4A49CE: run_builtin (perf.c:296)
        ==16331==    by 0x4A4CC0: handle_internal_command (perf.c:348)
        ==16331==    by 0x434371: run_argv (perf.c:392)
        ==16331==    by 0x434371: main (perf.c:530)
      Signed-off-by: default avatarMilian Wolff <milian.wolff@kdab.com>
      Signed-off-by: default avatarNamhyung Kim <namhyung@kernel.org>
      Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
      Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
      Cc: David Ahern <dsahern@gmail.com>
      Cc: Jiri Olsa <jolsa@kernel.org>
      Cc: Jiri Olsa <jolsa@redhat.com>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Yao Jin <yao.jin@linux.intel.com>
      Cc: kernel-team@lge.com
      Link: http://lkml.kernel.org/r/20170524062129.32529-3-namhyung@kernel.orgSigned-off-by: default avatarIngo Molnar <mingo@kernel.org>
      b21cc978
    • Milian Wolff's avatar
      perf report: Don't crash on invalid maps in `-g srcline` mode · 7d4df089
      Milian Wolff authored
      I just hit a segfault when doing `perf report -g srcline`.
      Valgrind pointed me at this code as the culprit:
      
        ==8359== Invalid read of size 8
        ==8359==    at 0x3096D9: map__rip_2objdump (map.c:430)
        ==8359==    by 0x2FC1A3: match_chain_srcline (callchain.c:645)
        ==8359==    by 0x2FC1A3: match_chain (callchain.c:700)
        ==8359==    by 0x2FC1A3: append_chain (callchain.c:895)
        ==8359==    by 0x2FC1A3: append_chain_children (callchain.c:846)
        ==8359==    by 0x2FF719: callchain_append (callchain.c:944)
        ==8359==    by 0x2FF719: hist_entry__append_callchain (callchain.c:1058)
        ==8359==    by 0x32FA06: iter_add_single_cumulative_entry (hist.c:908)
        ==8359==    by 0x33195C: hist_entry_iter__add (hist.c:1050)
        ==8359==    by 0x258F65: process_sample_event (builtin-report.c:204)
        ==8359==    by 0x30D60C: perf_session__deliver_event (session.c:1310)
        ==8359==    by 0x30D60C: ordered_events__deliver_event (session.c:119)
        ==8359==    by 0x310D12: __ordered_events__flush (ordered-events.c:210)
        ==8359==    by 0x310D12: ordered_events__flush.part.3 (ordered-events.c:277)
        ==8359==    by 0x30DD3C: perf_session__process_user_event (session.c:1349)
        ==8359==    by 0x30DD3C: perf_session__process_event (session.c:1475)
        ==8359==    by 0x30FC3C: __perf_session__process_events (session.c:1867)
        ==8359==    by 0x30FC3C: perf_session__process_events (session.c:1921)
        ==8359==    by 0x25A985: __cmd_report (builtin-report.c:575)
        ==8359==    by 0x25A985: cmd_report (builtin-report.c:1054)
        ==8359==    by 0x2B9A80: run_builtin (perf.c:296)
        ==8359==  Address 0x70 is not stack'd, malloc'd or (recently) free'd
      
      This patch fixes the issue.
      Signed-off-by: default avatarMilian Wolff <milian.wolff@kdab.com>
      [ Remove dependency from another change ]
      Signed-off-by: default avatarNamhyung Kim <namhyung@kernel.org>
      Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
      Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
      Cc: David Ahern <dsahern@gmail.com>
      Cc: Jiri Olsa <jolsa@kernel.org>
      Cc: Jiri Olsa <jolsa@redhat.com>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Yao Jin <yao.jin@linux.intel.com>
      Cc: kernel-team@lge.com
      Link: http://lkml.kernel.org/r/20170524062129.32529-2-namhyung@kernel.orgSigned-off-by: default avatarIngo Molnar <mingo@kernel.org>
      7d4df089
  6. 23 May, 2017 6 commits
  7. 22 May, 2017 16 commits
    • Kees Cook's avatar
      efi-pstore: Fix write/erase id tracking · c10e8031
      Kees Cook authored
      Prior to the pstore interface refactoring, the "id" generated during
      a backend pstore_write() was only retained by the internal pstore
      inode tracking list. Additionally the "part" was ignored, so EFI
      would encode this in the id. This corrects the misunderstandings
      and correctly sets "id" during pstore_write(), and uses "part"
      directly during pstore_erase().
      Reported-by: default avatarMarta Lofstedt <marta.lofstedt@intel.com>
      Fixes: 76cc9580 ("pstore: Replace arguments for write() API")
      Fixes: a61072aa ("pstore: Replace arguments for erase() API")
      Signed-off-by: default avatarKees Cook <keescook@chromium.org>
      Tested-by: default avatarMarta Lofstedt <marta.lofstedt@intel.com>
      c10e8031
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · 86ca984c
      Linus Torvalds authored
      Pull networking fixes from David Miller:
       "Mostly netfilter bug fixes in here, but we have some bits elsewhere as
        well.
      
         1) Don't do SNAT replies for non-NATed connections in IPVS, from
            Julian Anastasov.
      
         2) Don't delete conntrack helpers while they are still in use, from
            Liping Zhang.
      
         3) Fix zero padding in xtables's xt_data_to_user(), from Willem de
            Bruijn.
      
         4) Add proper RCU protection to nf_tables_dump_set() because we
            cannot guarantee that we hold the NFNL_SUBSYS_NFTABLES lock. From
            Liping Zhang.
      
         5) Initialize rcv_mss in tcp_disconnect(), from Wei Wang.
      
         6) smsc95xx devices can't handle IPV6 checksums fully, so don't
            advertise support for offloading them. From Nisar Sayed.
      
         7) Fix out-of-bounds access in __ip6_append_data(), from Eric
            Dumazet.
      
         8) Make atl2_probe() propagate the error code properly on failures,
            from Alexey Khoroshilov.
      
         9) arp_target[] in bond_check_params() is used uninitialized. This
            got changes from a global static to a local variable, which is how
            this mistake happened. Fix from Jarod Wilson.
      
        10) Fix fallout from unnecessary NULL check removal in cls_matchall,
            from Jiri Pirko. This is definitely brown paper bag territory..."
      
      * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (26 commits)
        net: sched: cls_matchall: fix null pointer dereference
        vsock: use new wait API for vsock_stream_sendmsg()
        bonding: fix randomly populated arp target array
        net: Make IP alignment calulations clearer.
        bonding: fix accounting of active ports in 3ad
        net: atheros: atl2: don't return zero on failure path in atl2_probe()
        ipv6: fix out of bound writes in __ip6_append_data()
        bridge: start hello_timer when enabling KERNEL_STP in br_stp_start
        smsc95xx: Support only IPv4 TCP/UDP csum offload
        arp: always override existing neigh entries with gratuitous ARP
        arp: postpone addr_type calculation to as late as possible
        arp: decompose is_garp logic into a separate function
        arp: fixed error in a comment
        tcp: initialize rcv_mss to TCP_MIN_MSS instead of 0
        netfilter: xtables: fix build failure from COMPAT_XT_ALIGN outside CONFIG_COMPAT
        ebtables: arpreply: Add the standard target sanity check
        netfilter: nf_tables: revisit chain/object refcounting from elements
        netfilter: nf_tables: missing sanitization in data from userspace
        netfilter: nf_tables: can't assume lock is acquired when dumping set elems
        netfilter: synproxy: fix conntrackd interaction
        ...
      86ca984c
    • Jiri Pirko's avatar
      net: sched: cls_matchall: fix null pointer dereference · 2d76b2f8
      Jiri Pirko authored
      Since the head is guaranteed by the check above to be null, the call_rcu
      would explode. Remove the previously logically dead code that was made
      logically very much alive and kicking.
      
      Fixes: 985538ee ("net/sched: remove redundant null check on head")
      Signed-off-by: default avatarJiri Pirko <jiri@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2d76b2f8
    • WANG Cong's avatar
      vsock: use new wait API for vsock_stream_sendmsg() · 499fde66
      WANG Cong authored
      As reported by Michal, vsock_stream_sendmsg() could still
      sleep at vsock_stream_has_space() after prepare_to_wait():
      
        vsock_stream_has_space
          vmci_transport_stream_has_space
            vmci_qpair_produce_free_space
              qp_lock
                qp_acquire_queue_mutex
                  mutex_lock
      
      Just switch to the new wait API like we did for commit
      d9dc8b0f ("net: fix sleeping for sk_wait_event()").
      Reported-by: default avatarMichal Kubecek <mkubecek@suse.cz>
      Cc: Stefan Hajnoczi <stefanha@redhat.com>
      Cc: Jorgen Hansen <jhansen@vmware.com>
      Cc: "Michael S. Tsirkin" <mst@redhat.com>
      Cc: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
      Signed-off-by: default avatarCong Wang <xiyou.wangcong@gmail.com>
      Reviewed-by: default avatarStefan Hajnoczi <stefanha@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      499fde66
    • Jarod Wilson's avatar
      bonding: fix randomly populated arp target array · 72ccc471
      Jarod Wilson authored
      In commit dc9c4d0f, the arp_target array moved from a static global
      to a local variable. By the nature of static globals, the array used to
      be initialized to all 0. At present, it's full of random data, which
      that gets interpreted as arp_target values, when none have actually been
      specified. Systems end up booting with spew along these lines:
      
      [   32.161783] IPv6: ADDRCONF(NETDEV_UP): lacp0: link is not ready
      [   32.168475] IPv6: ADDRCONF(NETDEV_UP): lacp0: link is not ready
      [   32.175089] 8021q: adding VLAN 0 to HW filter on device lacp0
      [   32.193091] IPv6: ADDRCONF(NETDEV_UP): lacp0: link is not ready
      [   32.204892] lacp0: Setting MII monitoring interval to 100
      [   32.211071] lacp0: Removing ARP target 216.124.228.17
      [   32.216824] lacp0: Removing ARP target 218.160.255.255
      [   32.222646] lacp0: Removing ARP target 185.170.136.184
      [   32.228496] lacp0: invalid ARP target 255.255.255.255 specified for removal
      [   32.236294] lacp0: option arp_ip_target: invalid value (-255.255.255.255)
      [   32.243987] lacp0: Removing ARP target 56.125.228.17
      [   32.249625] lacp0: Removing ARP target 218.160.255.255
      [   32.255432] lacp0: Removing ARP target 15.157.233.184
      [   32.261165] lacp0: invalid ARP target 255.255.255.255 specified for removal
      [   32.268939] lacp0: option arp_ip_target: invalid value (-255.255.255.255)
      [   32.276632] lacp0: Removing ARP target 16.0.0.0
      [   32.281755] lacp0: Removing ARP target 218.160.255.255
      [   32.287567] lacp0: Removing ARP target 72.125.228.17
      [   32.293165] lacp0: Removing ARP target 218.160.255.255
      [   32.298970] lacp0: Removing ARP target 8.125.228.17
      [   32.304458] lacp0: Removing ARP target 218.160.255.255
      
      None of these were actually specified as ARP targets, and the driver does
      seem to clean up the mess okay, but it's rather noisy and confusing, leaks
      values to userspace, and the 255.255.255.255 spew shows up even when debug
      prints are disabled.
      
      The fix: just zero out arp_target at init time.
      
      While we're in here, init arp_all_targets_value in the right place.
      
      Fixes: dc9c4d0f ("bonding: reduce scope of some global variables")
      CC: Mahesh Bandewar <maheshb@google.com>
      CC: Jay Vosburgh <j.vosburgh@gmail.com>
      CC: Veaceslav Falico <vfalico@gmail.com>
      CC: Andy Gospodarek <andy@greyhouse.net>
      CC: netdev@vger.kernel.org
      CC: stable@vger.kernel.org
      Signed-off-by: default avatarJarod Wilson <jarod@redhat.com>
      Acked-by: default avatarAndy Gospodarek <andy@greyhouse.net>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      72ccc471
    • Rafael J. Wysocki's avatar
      Merge branches 'pm-sleep' and 'powercap' · bb47e964
      Rafael J. Wysocki authored
      * pm-sleep:
        PM / hibernate: Declare variables as static
        RTC: rtc-cmos: Fix wakeup from suspend-to-idle
        PM / wakeup: Fix up wakeup_source_report_event()
      
      * powercap:
        PowerCap: Fix an error code in powercap_register_zone()
      bb47e964
    • Rafael J. Wysocki's avatar
      Merge branches 'acpi-button' and 'acpi-tools' · e3170cc0
      Rafael J. Wysocki authored
      * acpi-button:
        Revert "ACPI / button: Remove lid_init_state=method mode"
      
      * acpi-tools:
        tools/power/acpi: Add .gitignore file
      e3170cc0
    • Rafael J. Wysocki's avatar
      Merge branches 'intel_pstate', 'pm-cpufreq' and 'pm-cpufreq-sched' · 079c1812
      Rafael J. Wysocki authored
      * intel_pstate:
        cpufreq: intel_pstate: Document the current behavior and user interface
      
      * pm-cpufreq:
        cpufreq: dbx500: add a Kconfig symbol
      
      * pm-cpufreq-sched:
        cpufreq: schedutil: use now as reference when aggregating shared policy requests
      079c1812
    • David S. Miller's avatar
      net: Make IP alignment calulations clearer. · e4eda884
      David S. Miller authored
      The assignmnet:
      
      	ip_align = strict ? 2 : NET_IP_ALIGN;
      
      in compare_pkt_ptr_alignment() trips up Coverity because we can only
      get to this code when strict is true, therefore ip_align will always
      be 2 regardless of NET_IP_ALIGN's value.
      
      So just assign directly to '2' and explain the situation in the
      comment above.
      Reported-by: default avatar"Gustavo A. R. Silva" <garsilva@embeddedor.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e4eda884
    • Jarod Wilson's avatar
      bonding: fix accounting of active ports in 3ad · 751da2a6
      Jarod Wilson authored
      As of 7bb11dc9 and 0622cab0, bond slaves in a 3ad bond are not
      removed from the aggregator when they are down, and the active slave count
      is NOT equal to number of ports in the aggregator, but rather the number
      of ports in the aggregator that are still enabled. The sysfs spew for
      bonding_show_ad_num_ports() has a comment that says "Show number of active
      802.3ad ports.", but it's currently showing total number of ports, both
      active and inactive. Remedy it by using the same logic introduced in
      0622cab0 in __bond_3ad_get_active_agg_info(), so sysfs, procfs and
      netlink all report the number of active ports. Note that this means that
      IFLA_BOND_AD_INFO_NUM_PORTS really means NUM_ACTIVE_PORTS instead of
      NUM_PORTS, and thus perhaps should be renamed for clarity.
      
      Lightly tested on a dual i40e lacp bond, simulating link downs with an ip
      link set dev <slave2> down, was able to produce the state where I could
      see both in the same aggregator, but a number of ports count of 1.
      
      MII Status: up
      Active Aggregator Info:
              Aggregator ID: 1
              Number of ports: 2 <---
      Slave Interface: ens10
      MII Status: up <---
      Aggregator ID: 1
      Slave Interface: ens11
      MII Status: up
      Aggregator ID: 1
      
      MII Status: up
      Active Aggregator Info:
              Aggregator ID: 1
              Number of ports: 1 <---
      Slave Interface: ens10
      MII Status: down <---
      Aggregator ID: 1
      Slave Interface: ens11
      MII Status: up
      Aggregator ID: 1
      
      CC: Jay Vosburgh <j.vosburgh@gmail.com>
      CC: Veaceslav Falico <vfalico@gmail.com>
      CC: Andy Gospodarek <andy@greyhouse.net>
      CC: netdev@vger.kernel.org
      Signed-off-by: default avatarJarod Wilson <jarod@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      751da2a6
    • Alexey Khoroshilov's avatar
      net: atheros: atl2: don't return zero on failure path in atl2_probe() · bd703a15
      Alexey Khoroshilov authored
      If dma mask checks fail in atl2_probe(), it breaks off initialization,
      deallocates all resources, but returns zero.
      
      The patch adds proper error code return value and
      make error code setup unified.
      
      Found by Linux Driver Verification project (linuxtesting.org).
      Signed-off-by: default avatarAlexey Khoroshilov <khoroshilov@ispras.ru>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      bd703a15
    • Eric Dumazet's avatar
      ipv6: fix out of bound writes in __ip6_append_data() · 232cd35d
      Eric Dumazet authored
      Andrey Konovalov and idaifish@gmail.com reported crashes caused by
      one skb shared_info being overwritten from __ip6_append_data()
      
      Andrey program lead to following state :
      
      copy -4200 datalen 2000 fraglen 2040
      maxfraglen 2040 alloclen 2048 transhdrlen 0 offset 0 fraggap 6200
      
      The skb_copy_and_csum_bits(skb_prev, maxfraglen, data + transhdrlen,
      fraggap, 0); is overwriting skb->head and skb_shared_info
      
      Since we apparently detect this rare condition too late, move the
      code earlier to even avoid allocating skb and risking crashes.
      
      Once again, many thanks to Andrey and syzkaller team.
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Reported-by: default avatarAndrey Konovalov <andreyknvl@google.com>
      Tested-by: default avatarAndrey Konovalov <andreyknvl@google.com>
      Reported-by: <idaifish@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      232cd35d
    • Jan Kiszka's avatar
      i2c: designware: Fix bogus sda_hold_time due to uninitialized vars · e2c82492
      Jan Kiszka authored
      We need to initializes those variables to 0 for platforms that do not
      provide ACPI parameters. Otherwise, we set sda_hold_time to random
      values, breaking e.g. Galileo and IOT2000 boards.
      
      Fixes: 9d640843 ("i2c: designware: don't infer timings described by ACPI from clock rate")
      Signed-off-by: default avatarJan Kiszka <jan.kiszka@siemens.com>
      Reviewed-by: default avatarArd Biesheuvel <ard.biesheuvel@linaro.org>
      Acked-by: default avatarJarkko Nikula <jarkko.nikula@linux.intel.com>
      Signed-off-by: default avatarWolfram Sang <wsa@the-dreams.de>
      e2c82492
    • Sebastian Reichel's avatar
      i2c: i2c-tiny-usb: fix buffer not being DMA capable · 5165da59
      Sebastian Reichel authored
      Since v4.9 i2c-tiny-usb generates the below call trace
      and longer works, since it can't communicate with the
      USB device. The reason is, that since v4.9 the USB
      stack checks, that the buffer it should transfer is DMA
      capable. This was a requirement since v2.2 days, but it
      usually worked nevertheless.
      
      [   17.504959] ------------[ cut here ]------------
      [   17.505488] WARNING: CPU: 0 PID: 93 at drivers/usb/core/hcd.c:1587 usb_hcd_map_urb_for_dma+0x37c/0x570
      [   17.506545] transfer buffer not dma capable
      [   17.507022] Modules linked in:
      [   17.507370] CPU: 0 PID: 93 Comm: i2cdetect Not tainted 4.11.0-rc8+ #10
      [   17.508103] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
      [   17.509039] Call Trace:
      [   17.509320]  ? dump_stack+0x5c/0x78
      [   17.509714]  ? __warn+0xbe/0xe0
      [   17.510073]  ? warn_slowpath_fmt+0x5a/0x80
      [   17.510532]  ? nommu_map_sg+0xb0/0xb0
      [   17.510949]  ? usb_hcd_map_urb_for_dma+0x37c/0x570
      [   17.511482]  ? usb_hcd_submit_urb+0x336/0xab0
      [   17.511976]  ? wait_for_completion_timeout+0x12f/0x1a0
      [   17.512549]  ? wait_for_completion_timeout+0x65/0x1a0
      [   17.513125]  ? usb_start_wait_urb+0x65/0x160
      [   17.513604]  ? usb_control_msg+0xdc/0x130
      [   17.514061]  ? usb_xfer+0xa4/0x2a0
      [   17.514445]  ? __i2c_transfer+0x108/0x3c0
      [   17.514899]  ? i2c_transfer+0x57/0xb0
      [   17.515310]  ? i2c_smbus_xfer_emulated+0x12f/0x590
      [   17.515851]  ? _raw_spin_unlock_irqrestore+0x11/0x20
      [   17.516408]  ? i2c_smbus_xfer+0x125/0x330
      [   17.516876]  ? i2c_smbus_xfer+0x125/0x330
      [   17.517329]  ? i2cdev_ioctl_smbus+0x1c1/0x2b0
      [   17.517824]  ? i2cdev_ioctl+0x75/0x1c0
      [   17.518248]  ? do_vfs_ioctl+0x9f/0x600
      [   17.518671]  ? vfs_write+0x144/0x190
      [   17.519078]  ? SyS_ioctl+0x74/0x80
      [   17.519463]  ? entry_SYSCALL_64_fastpath+0x1e/0xad
      [   17.519959] ---[ end trace d047c04982f5ac50 ]---
      
      Cc: <stable@vger.kernel.org>
      Signed-off-by: default avatarSebastian Reichel <sebastian.reichel@collabora.co.uk>
      Reviewed-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      Acked-by: default avatarTill Harbaum <till@harbaum.org>
      Signed-off-by: default avatarWolfram Sang <wsa@the-dreams.de>
      5165da59
    • Linus Torvalds's avatar
      Linux 4.12-rc2 · 08332893
      Linus Torvalds authored
      08332893
    • Linus Torvalds's avatar
      x86: fix 32-bit case of __get_user_asm_u64() · 33c9e972
      Linus Torvalds authored
      The code to fetch a 64-bit value from user space was entirely buggered,
      and has been since the code was merged in early 2016 in commit
      b2f68038 ("x86/mm/32: Add support for 64-bit __get_user() on 32-bit
      kernels").
      
      Happily the buggered routine is almost certainly entirely unused, since
      the normal way to access user space memory is just with the non-inlined
      "get_user()", and the inlined version didn't even historically exist.
      
      The normal "get_user()" case is handled by external hand-written asm in
      arch/x86/lib/getuser.S that doesn't have either of these issues.
      
      There were two independent bugs in __get_user_asm_u64():
      
       - it still did the STAC/CLAC user space access marking, even though
         that is now done by the wrapper macros, see commit 11f1a4b9
         ("x86: reorganize SMAP handling in user space accesses").
      
         This didn't result in a semantic error, it just means that the
         inlined optimized version was hugely less efficient than the
         allegedly slower standard version, since the CLAC/STAC overhead is
         quite high on modern Intel CPU's.
      
       - the double register %eax/%edx was marked as an output, but the %eax
         part of it was touched early in the asm, and could thus clobber other
         inputs to the asm that gcc didn't expect it to touch.
      
         In particular, that meant that the generated code could look like
         this:
      
              mov    (%eax),%eax
              mov    0x4(%eax),%edx
      
         where the load of %edx obviously was _supposed_ to be from the 32-bit
         word that followed the source of %eax, but because %eax was
         overwritten by the first instruction, the source of %edx was
         basically random garbage.
      
      The fixes are trivial: remove the extraneous STAC/CLAC entries, and mark
      the 64-bit output as early-clobber to let gcc know that no inputs should
      alias with the output register.
      
      Cc: Al Viro <viro@zeniv.linux.org.uk>
      Cc: Benjamin LaHaise <bcrl@kvack.org>
      Cc: Ingo Molnar <mingo@kernel.org>
      Cc: stable@kernel.org   # v4.8+
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      33c9e972
  8. 21 May, 2017 1 commit
    • Linus Torvalds's avatar
      Clean up x86 unsafe_get/put_user() type handling · 334a023e
      Linus Torvalds authored
      Al noticed that unsafe_put_user() had type problems, and fixed them in
      commit a7cc722f ("fix unsafe_put_user()"), which made me look more
      at those functions.
      
      It turns out that unsafe_get_user() had a type issue too: it limited the
      largest size of the type it could handle to "unsigned long".  Which is
      fine with the current users, but doesn't match our existing normal
      get_user() semantics, which can also handle "u64" even when that does
      not fit in a long.
      
      While at it, also clean up the type cast in unsafe_put_user().  We
      actually want to just make it an assignment to the expected type of the
      pointer, because we actually do want warnings from types that don't
      convert silently.  And it makes the code more readable by not having
      that one very long and complex line.
      
      [ This patch might become stable material if we ever end up back-porting
        any new users of the unsafe uaccess code, but as things stand now this
        doesn't matter for any current existing uses. ]
      
      Cc: Al Viro <viro@zeniv.linux.org.uk>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      334a023e