- 07 Mar, 2010 10 commits
-
-
Wolfgang Grandegger authored
"__devinit[data]" has not yet been used for all initialization functions and data. To avoid truncating lines, the struct "mpc_i2c_match_data" has been renamed to "mpc_i2c_data", which is even the better name. Signed-off-by:
Wolfgang Grandegger <wg@denx.de> Tested-by:
Wolfram Sang <w.sang@pengutronix.de> Signed-off-by:
Ben Dooks <ben-linux@fluff.org>
-
Uwe Kleine-König authored
Having a pointer to the probe function is unnecessary when using platform_driver_probe and yields a section mismatch warning after removing the white list entry "*driver" for { .data$, .data.rel$ } -> { .init.* } mismatches in modpost. Signed-off-by:Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
srinidhi kasagar authored
This adds support for ST-Ericsson's I2C block found in Ux500 and Nomadik 8815 platforms. Signed-off-by:
srinidhi kasagar <srinidhi.kasagar@stericsson.com> Acked-by:
Andrea Gallo <andrea.gallo@stericsson.com> Acked-by:
Linus Walleij <linus.walleij@stericsson.com> Reviewed-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreqLinus Torvalds authored
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] Fix cast warning in pcc driver. [CPUFREQ] Processor Clocking Control interface driver
-
Dmitry Torokhov authored
The recent rework of /proc/bus/usb/devices polling support made this structure unused so let's remove it. Signed-off-by:
Dmitry Torokhov <dtor@mail.ru> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
This reverts commit a069c266. It turns ou that not only was it missing a case (XFS) that needed it, but perhaps more importantly, people sometimes want to enable new modules that they hadn't had enabled before, and if such a module uses list_sort(), it can't easily be inserted any more. So rather than add a "select LIST_SORT" to the XFS case, just leave it compiled in. It's not all _that_ big, after all, and the inconvenience isn't worth it. Requested-by:
Alexey Dobriyan <adobriyan@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Don Mullis <don.mullis@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by:
-
Bjorn Helgaas authored
This adds separate I/O and memory specs, so we don't have to change the field width in a shared spec, which then lets us make all the specs const and static, since they never change. Signed-off-by:
Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by:
-
Bjorn Helgaas authored
Add clues about what the SMALL and SPECIAL flags do. Signed-off-by:
-
Joe Perches authored
Reducing the size of struct printf_spec is a good thing because multiple instances are commonly passed on stack. It's possible for type to be u8 and field_width to be s8, but this is likely small enough for now. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Linus Torvalds authored
The caller of usbfs_conn_disc_event() in some cases (but not always) already holds usbfs_mutex, so trying to protect the event counter with that lock causes nasty deadlocks. The problem was introduced by commit 554f7696 ("USB: Remove BKL from poll()") when the BLK protection was turned into using the mutex instead. So fix this by using an atomic variable instead. And while we're at it, get rid of the atrocious naming of said variable and the waitqueue it is associated with. This also cleans up the unnecessary locking in the poll routine, since the whole point of how the pollwait table works is that you can just add yourself to the waiting list, and then check the condition you're waiting for afterwards - avoiding all races. It also gets rid of the unnecessary dynamic allocation of the device status that just contained a single word. We should use f_version for this, as Dmitry Torokhov points out. That simplifies everything further. Reported-and-tested-by:
Jeff Chua <jeff.chua.linux@gmail.com> Acked-by:
Greg Kroah-Hartman <gregkh@suse.de> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Cc: Oliver Neukum <oliver@neukum.org> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
- 06 Mar, 2010 30 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/joern/logfsLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/joern/logfs: [LogFS] Change magic number [LogFS] Remove h_version field [LogFS] Check feature flags [LogFS] Only write journal if dirty [LogFS] Fix bdev erases [LogFS] Silence gcc [LogFS] Prevent 64bit divisions in hash_index [LogFS] Plug memory leak on error paths [LogFS] Add MAINTAINERS entry [LogFS] add new flash file system Fixed up trivial conflict in lib/Kconfig, and a semantic conflict in fs/logfs/inode.c introduced by write_inode() being changed to use writeback_control' by commit a9185b41 ("pass writeback_control to ->write_inode")
-
git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dmLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm: dm raid1: fix deadlock when suspending failed device dm: eliminate some holes data structures dm ioctl: introduce flag indicating uevent was generated dm: free dm_io before bio_endio not after dm table: remove unused dm_get_device range parameters dm ioctl: only issue uevent on resume if state changed dm raid1: always return error if all legs fail dm mpath: refactor pg_init dm mpath: wait for pg_init completion when suspending dm mpath: hold io until all pg_inits completed dm mpath: avoid storing private suspended state dm: document when snapshot has finished merging dm table: remove dm_get from dm_table_get_md dm mpath: skip activate_path for failed paths dm mpath: pass struct pgpath to pg init done
-
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/stagingLinus Torvalds authored
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: (23 commits) hwmon: Remove the deprecated adt7473 driver hwmon: Fix off-by-one kind values hwmon: (tmp421) Fix temperature conversions hwmon: (tmp421) Restore missing inputs hwmon: Driver for Andigilog aSC7621 family monitoring chips hwmon: (adt7411) Improve locking hwmon: Add driver for ADT7411 voltage and temperature sensor hwmon: (w83793) Add watchdog functionality hwmon: (g760a) Make rpm_from_cnt static hwmon: (it87) Validate auto pwm settings hwmon: (it87) Add support for old automatic fan speed control hwmon: (it87) Drop dead web links in documentation hwmon: (it87) Add an entry in MAINTAINERS hwmon: (it87) Use strict_strtol instead of simple_strtol hwmon: (it87) Fix many checkpatch errors and warnings hwmon: (it87) Add support for beep on alarm hwmon: (it87) Create vid attributes by group hwmon: (it87) Refactor attributes creation and removal hwmon: (it87) Expose the PWM/temperature mappings hwmon: (it87) Display fan outputs in automatic mode as such ...
-
git://oss.sgi.com/xfs/xfsLinus Torvalds authored
* 'for-linus' of git://oss.sgi.com/xfs/xfs: (21 commits) xfs: return inode fork offset in bulkstat for fsr xfs: Increase the default size of the reserved blocks pool xfs: truncate delalloc extents when IO fails in writeback xfs: check for more work before sleeping in xfssyncd xfs: Fix a build warning in xfs_aops.c xfs: fix locking for inode cache radix tree tag updates xfs: remove xfs_ipin/xfs_iunpin xfs: cleanup xfs_iunpin_wait/xfs_iunpin_nowait xfs: kill xfs_lrw.h xfs: factor common xfs_trans_bjoin code xfs: stop passing opaque handles to xfs_log.c routines xfs: split xfs_bmap_btalloc xfs: fix xfs_fsblock_t tracing xfs: fix inode pincount check in fsync xfs: Non-blocking inode locking in IO completion xfs: implement optimized fdatasync xfs: remove wrapper for the fsync file operation xfs: remove wrappers for read/write file operations xfs: merge xfs_lrw.c into xfs_file.c xfs: fix dquota trace format ...
-
git://linux-nfs.org/~bfields/linuxLinus Torvalds authored
* 'for-2.6.34' of git://linux-nfs.org/~bfields/linux: (22 commits) nfsd4: fix minor memory leak svcrpc: treat uid's as unsigned nfsd: ensure sockets are closed on error Revert "sunrpc: move the close processing after do recvfrom method" Revert "sunrpc: fix peername failed on closed listener" sunrpc: remove unnecessary svc_xprt_put NFSD: NFSv4 callback client should use RPC_TASK_SOFTCONN xfs_export_operations.commit_metadata commit_metadata export operation replacing nfsd_sync_dir lockd: don't clear sm_monitored on nsm_reboot_lookup lockd: release reference to nsm_handle in nlm_host_rebooted nfsd: Use vfs_fsync_range() in nfsd_commit NFSD: Create PF_INET6 listener in write_ports SUNRPC: NFS kernel APIs shouldn't return ENOENT for "transport not found" SUNRPC: Bury "#ifdef IPV6" in svc_create_xprt() NFSD: Support AF_INET6 in svc_addsock() function SUNRPC: Use rpc_pton() in ip_map_parse() nfsd: 4.1 has an rfc number nfsd41: Create the recovery entry for the NFSv4.1 client nfsd: use vfs_fsync for non-directories ...
-
git://git.infradead.org/ubi-2.6Linus Torvalds authored
* git://git.infradead.org/ubi-2.6: UBI: add write checking UBI: simplify debugging return codes UBI: fix attaching error path UBI: support attaching by MTD character device name UBI: mark few variables as __initdata
-
Denis Turischev authored
Signed-off-by:
Denis Turischev <denis@compulab.co.il> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Ben Gardner authored
The cs5535-gpio driver's get() function was returning the output value. This means that the GPIO pins would never work as an input, even if configured as an input. The driver should return the READ_BACK value, which is the sensed line value. To make that work when the direction is 'output', INPUT_ENABLE needs to be set. In addition, the driver was not disabling OUTPUT_ENABLE when the direction is set to 'input'. That would cause the GPIO to continue to drive the pin if the direction was ever set to output. This issue was noticed when attempting to use the gpiolib driver to read an external input. I had previously been using the char/cs5535-gpio driver. Signed-off-by:
Ben Gardner <gardner.ben@gmail.com> Acked-by:
Andres Salomon <dilinger@collabora.co.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: <stable@kernel.org> [2.6.33.x] Signed-off-by:
-
Marc Zyngier authored
Most of the GPIO expanders controlled by the pca953x driver are able to report changes on the input pins through an *INT pin. This patch implements the irq_chip functionality (edge detection only). The driver has been tested on an Arcom Zeus. [akpm@linux-foundation.org: the compiler does inlining for us nowadays] Signed-off-by:
Marc Zyngier <maz@misterjones.org> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: David Brownell <david-b@pacbell.net> Cc: Nate Case <ncase@xes-inc.com> Signed-off-by:
-
Richard Röjfors authored
Introduce support for triggering interrupts on both rising and falling edge. This feature requires version 3 or newer of the IP, a version check is done when triggering on both edges is requested. Signed-off-by:
Richard Röjfors <richard.rojfors@pelagicore.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
Eric Miao authored
gpio_request() without initial configuration of the GPIO is normally useless, introduce gpio_request_one() together with GPIOF_ flags for input/output direction and initial output level. gpio_{request,free}_array() for multiple GPIOs. Signed-off-by:Eric Miao <eric.y.miao@gmail.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Ben Nizette <bn@niasdigital.com> Signed-off-by:
-
Olof Johansson authored
linux/i2c/pca953x.h is a very bare include file. Fix check for multiple includes of linux/i2c/pca953x.h, and add dependent includes into the header file. Signed-off-by:
Olof Johansson <olof@lixom.net> Acked-by:
Jean Delvare <khali@linux-fr.org> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
Wolfram Sang authored
Add the MAX7300-I2C variant of the MAX7301-SPI version. Both chips share the same core logic, so the generic part of the in-kernel SPI-driver is refactored into a generic part. The I2C and SPI specific funtions are then wrapped into seperate drivers picking up the generic part. Signed-off-by:
-
James Hogan authored
The else part of the if statement is indented but does not have braces around it. It clearly should since it uses clk_enable and clk_disable which are supposed to balance. Signed-off-by:
James Hogan <james@albanarts.com> Acked-by:
Alessandro Zummo <a.zummo@towertech.it> Cc: <stable@kernel.org> Signed-off-by:
-
Uwe Kleine-König authored
Signed-off-by:
-
Uwe Kleine-König authored
This is to protect from interrupt handlers using an unregistered rtc device. To assert that the reset irq is considered now before the rtc is registered the corresponding status is checked before. Signed-off-by:
-
Uwe Kleine-König authored
The driver for the mc13783 rtc needs to know if the TODA irq is pending. Instead of tracking in the rtc driver if the irq is enabled provide that information, too. Signed-off-by:
-
Uwe Kleine-König authored
mc13783_ackirq, mc13783_unmask and mc13783_mask are deprecated, use the drop in replacements with the nicer names. Signed-off-by:
-
Uwe Kleine-König authored
mc13783_ackirq is deprecated, use the drop in replacement mc13783_irq_ack. Signed-off-by:
-
Uwe Kleine-König authored
In the source file group these functions together. The mc13783 header file provides fallback implementations for the old names to prevent build failures. When all users of the old names are fixed to use the new names these can go away. Signed-off-by:
-
Aaro Koskinen authored
The idr should be destroyed when the module is unloaded. Found with kmemleak. Signed-off-by:
Aaro Koskinen <aaro.koskinen@nokia.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: stable <stable@kernel.org> Signed-off-by:
-
Tobias Klauser authored
The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by:
Tobias Klauser <tklauser@distanz.ch> Signed-off-by:
-
Julia Lawall authored
Memset should be given the size of the structure, not the size of the pointer. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ type T; T *x; expression E; @@ memset(x, E, sizeof( + * x)) // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
Uwe Kleine-König authored
The function pcf2123_remove is used only wrapped by __devexit_p so define it using __devexit. Signed-off-by:
-
H Hartley Sweeten authored
Fix issue with rtc device not getting unregistered in probe error path. Use the devres managed resource functions in the probe routine to cleanup the error path. Use sysfs_{create/remove}_group to add/remove the sysfs files. Reduces the text size by 132 bytes, increases data by 12 bytes: text data bss dec hex filename - 937 124 0 1061 425 rtc-ep93xx.o + 805 136 0 941 3ad rtc-ep93xx.o Signed-off-by:H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by:
-
Alexander Beregalov authored
Free pdata before exit. Found by cppcheck. [yuasa@linux-mips.org: add missing iounmap()] Signed-off-by:
Alexander Beregalov <a.beregalov@gmail.com> Reviewed-by:
WANG Cong <xiyou.wangcong@gmail.com> Acked-by:
Daniel Mack <daniel@caiaq.de> Acked-by:
-
Randy Dunlap authored
Currently the xen support drivers are displayed in the main Device Drivers menu of the config tools instead of in their own sub-menu, so move them to their own sub-menu, like the rest of the driver world uses. This keeps the main Device Drivers menu from becoming messy. Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by:
-
Thiago Farina authored
warning: symbol 'vgacon_text_mode_force' was not declared. Should it be static? Signed-off-by:
Thiago Farina <tfransosi@gmail.com> Acked-by:
Matthew Garrett <mjg@redhat.com> Signed-off-by:
-
Amerigo Wang authored
BuraphaLinux reported that we will trigger a mm warning when we CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=65536, this is because mm cann't allocate so many pages. We should limit the range of CONFIG_VGACON_SOFT_SCROLLBACK_SIZE, don't give a user any chance to trigger that. Reported-by:
BuraphaLinux Server <buraphalinuxserver@gmail.com> Tested-by:
WANG Cong <amwang@redhat.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
-
Neil Horman authored
Modify uid check in do_coredump so as to not apply it in the case of pipes. This just got noticed in testing. The end of do_coredump validates the uid of the inode for the created file against the uid of the crashing process to ensure that no one can pre-create a core file with different ownership and grab the information contained in the core when they shouldn' tbe able to. This causes failures when using pipes for a core dumps if the crashing process is not root, which is the uid of the pipe when it is created. The fix is simple. Since the check for matching uid's isn't relevant for pipes (a process can't create a pipe that the uermodehelper code will open anyway), we can just just skip it in the event ispipe is non-zero Reverts a pipe-affecting change which was accidentally made in : commit c46f739d : Author: Ingo Molnar <mingo@elte.hu> : AuthorDate: Wed Nov 28 13:59:18 2007 +0100 : Commit: Linus Torvalds <torvalds@woody.linux-foundation.org> : CommitDate: Wed Nov 28 10:58:01 2007 -0800 : : vfs: coredumping fix Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
