- 20 Oct, 2021 40 commits
-
-
Ryder Lee authored
Rename "queues" to "tx-queues" to reflect its meaning. Signed-off-by:
Ryder Lee <ryder.lee@mediatek.com> Signed-off-by:
Felix Fietkau <nbd@nbd.name>
-
Ryder Lee authored
Complete PSE/PLE queue statistics, including per-sta AC queue information. Co-developed-by:
Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by:
-
Lorenzo Bianconi authored
As for 7915 moving mt7921_queue_rx_skb makes it possible to make some functions in mac.c static Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
-
Felix Fietkau authored
WMM index range needs to be split between both PHYs if a second PHY exists. The condition for that was accidentally written as checking if the vif PHY is the secondary one Signed-off-by: -
Lorenzo Bianconi authored
Even if it is a not real issue, add missing brackets in mt7915_mcu_sta_bfer_ht routine in order to improve code readability Signed-off-by:
-
Lorenzo Bianconi authored
Introduce mcu APIs to configure bss coloring and to report bss coloring collisions. Add support to report coloring countdown in beacon sent by the device. Co-developed-by:
-
MeiChia Chiu authored
Initialize brightness_set and blink_set callbacks to enable LED support. The base 0x7c000000 is MCU space so driver can't touch it, and should map the LED base to 0x18000000 host's view. Signed-off-by:
MeiChia Chiu <meichia.chiu@mediatek.com> Signed-off-by:
Money Wang <money.wang@mediatek.com> Signed-off-by:
-
Ben Greear authored
If skb is null, then don't try to dereference it. Signed-off-by:
Ben Greear <greearb@candelatech.com> Signed-off-by:
-
Ben Greear authored
At 160, this chip can only do 2x2 NSS. Fix the features accordingly, verified it shows up properly in iw phy foo info now. Signed-off-by:
-
Ryder Lee authored
Drop MT_DRV_AMSDU_OFFLOAD after introducing IEEE80211_OFFLOAD_ENCAP_ENABLED flag in mac80211. Driver now checks vif->offload_flags to know encap offload status of each interface. Signed-off-by:
-
Ryder Lee authored
1. EIFS has been divided into OFDM/CCK fields after 11ax generation. 2. For 5G/6G SIFS setting, hardware counts extra 6us for OFDM. Signed-off-by:
-
Lorenzo Bianconi authored
Fix the following sparse endianness warnings drivers/net/wireless/mediatek/mt76/mt7921/mac.c:212:28: warning: cast from restricted __le32 drivers/net/wireless/mediatek/mt76/mt7921/mac.c:212:28: warning: cast to restricted __le32 drivers/net/wireless/mediatek/mt76/mt7921/mac.c:212:28: warning: restricted __le32 degrades to integer drivers/net/wireless/mediatek/mt76/mt7921/mac.c:212:28: warning: cast from restricted __le32 drivers/net/wireless/mediatek/mt76/mt7921/mac.c:212:28: warning: restricted __le32 degrades to integer drivers/net/wireless/mediatek/mt76/mt7921/mac.c:217:25: warning: cast from restricted __le32 drivers/net/wireless/mediatek/mt76/mt7921/mac.c:217:25: warning: restricted __le32 degrades to integer drivers/net/wireless/mediatek/mt76/mt7921/mac.c:217:25: warning: cast from restricted __le32 drivers/net/wireless/mediatek/mt76/mt7921/mac.c:217:25: warning: restricted __le32 degrades to integer drivers/net/wireless/mediatek/mt76/mt7921/mac.c:222:25: warning: cast from restricted __le32 drivers/net/wireless/mediatek/mt76/mt7921/mac.c:222:25: warning: cast to restricted __le32 drivers/net/wireless/mediatek/mt76/mt7921/mac.c:222:25: warning: restricted __le32 degrades to integer drivers/net/wireless/mediatek/mt76/mt7921/mac.c:222:25: warning: cast from restricted __le32 drivers/net/wireless/mediatek/mt76/mt7921/mac.c:222:25: warning: restricted __le32 degrades to integer drivers/net/wireless/mediatek/mt76/mt7921/mac.c:224:25: warning: cast from restricted __le32 drivers/net/wireless/mediatek/mt76/mt7921/mac.c:224:25: warning: cast to restricted __le32 drivers/net/wireless/mediatek/mt76/mt7921/mac.c:224:25: warning: restricted __le32 degrades to integer drivers/net/wireless/mediatek/mt76/mt7921/mac.c:224:25: warning: cast from restricted __le32 drivers/net/wireless/mediatek/mt76/mt7921/mac.c:224:25: warning: restricted __le32 degrades to integer drivers/net/wireless/mediatek/mt76/mt7921/mac.c:259:13: warning: cast from restricted __le32 drivers/net/wireless/mediatek/mt76/mt7921/mac.c:259:13: warning: restricted __le32 degrades to integer Signed-off-by:
-
Sean Wang authored
Fix the kernel warning from cfg80211_calculate_bitrate due to the legacy rate is not parsed well in the current driver. Also, zeros struct rate_info before we fill it out to avoid the old value is kept such as rate->legacy. [ 790.921560] WARNING: CPU: 7 PID: 970 at net/wireless/util.c:1298 cfg80211_calculate_bitrate+0x354/0x35c [cfg80211] [ 790.987738] Hardware name: MediaTek Asurada rev1 board (DT) [ 790.993298] pstate: a0400009 (NzCv daif +PAN -UAO) [ 790.998104] pc : cfg80211_calculate_bitrate+0x354/0x35c [cfg80211] [ 791.004295] lr : cfg80211_calculate_bitrate+0x180/0x35c [cfg80211] [ 791.010462] sp : ffffffc0129c3880 [ 791.013765] x29: ffffffc0129c3880 x28: ffffffd38305bea8 [ 791.019065] x27: ffffffc0129c3970 x26: 0000000000000013 [ 791.024364] x25: 00000000000003ca x24: 000000000000002f [ 791.029664] x23: 00000000000000d0 x22: ffffff8d108bc000 [ 791.034964] x21: ffffff8d108bc0d0 x20: ffffffc0129c39a8 [ 791.040264] x19: ffffffc0129c39a8 x18: 00000000ffff0a10 [ 791.045563] x17: 0000000000000050 x16: 00000000000000ec [ 791.050910] x15: ffffffd3f9ebed9c x14: 0000000000000006 [ 791.056211] x13: 00000000000b2eea x12: 0000000000000000 [ 791.061511] x11: 00000000ffffffff x10: 0000000000000000 [ 791.066811] x9 : 0000000000000000 x8 : 0000000000000000 [ 791.072110] x7 : 0000000000000000 x6 : ffffffd3fafa5a7b [ 791.077409] x5 : 0000000000000000 x4 : 0000000000000000 [ 791.082708] x3 : 0000000000000000 x2 : 0000000000000000 [ 791.088008] x1 : ffffff8d3f79c918 x0 : 0000000000000000 [ 791.093308] Call trace: [ 791.095770] cfg80211_calculate_bitrate+0x354/0x35c [cfg80211] [ 791.101615] nl80211_put_sta_rate+0x6c/0x2c0 [cfg80211] [ 791.106853] nl80211_send_station+0x980/0xaa4 [cfg80211] [ 791.112178] nl80211_get_station+0xb4/0x134 [cfg80211] [ 791.117308] genl_rcv_msg+0x3a0/0x440 [ 791.120960] netlink_rcv_skb+0xcc/0x118 [ 791.124785] genl_rcv+0x34/0x48 [ 791.127916] netlink_unicast+0x144/0x1dc Fixes: 1c099ab4 ("mt76: mt7921: add MCU support") Signed-off-by:
Sean Wang <sean.wang@mediatek.com> Signed-off-by:
-
Sean Wang authored
According to the firmware usage, OFDM rates should fill out bit 6 - 13 while CCK rates should fill out bit 0 - 3 in legacy field of RA info to make the rate adaption runs propertly. Otherwise, a unicast frame might be picking up the unsupported rate to send out. Fixes: 1c099ab4 ("mt76: mt7921: add MCU support") Reported-by:
Joshua Emele <jemele@chromium.org> Co-developed-by:
YN Chen <YN.Chen@mediatek.com> Signed-off-by:
-
Ryder Lee authored
Add HE-LTF control. Signed-off-by:
Shayne Chen <shayne.chen@mediatek.com> Signed-off-by:
-
Sean Wang authored
Report HE MU/BF radiotap. That fixed HE MU packets dropped by mac80211 because they are missing the ieee80211_radiotap_he_mu header. Fixes: 163f4d22 ("mt76: mt7921: add MAC support") Co-developed-by:
Eric-SY Chang <Eric-SY.Chang@mediatek.com> Signed-off-by:
-
Lorenzo Bianconi authored
Move mt7615_mcu_set_p2p_oppps routine in mt76_connac_lib module in order to be reused in mt7921 driver Signed-off-by:
-
Lorenzo Bianconi authored
Introduce mt76_register_debugfs_fops routine in order to define per-driver regs file operations and make sure the device is up before reading or writing its registers Fixes: 1d8efc74 ("mt76: mt7921: introduce Runtime PM support") Fixes: de5ff3c9 ("mt76: mt7615: introduce pm_power_save delayed work") Signed-off-by:
-
Lorenzo Bianconi authored
Introduce mt7921_mcu_set_beacon_filter utility routine in order to remove duplicated code for hw beacon filtering. Move mt7921_pm_interface_iter in debugfs since it is just used there. Make the following routine static: - mt7921_pm_interface_iter - mt7921_mcu_uni_bss_bcnft - mt7921_mcu_set_bss_pm Signed-off-by:
-
Lorenzo Bianconi authored
Remove mt7921_mac_set_beacon_filter routine since it is no longer used. Signed-off-by:
-
Lorenzo Bianconi authored
Remove monitor_vif pointer from mt7921 since it is just a leftover of initial porting. Signed-off-by:
-
YN Chen authored
Consider .max_reg_power in struct ieee80211_channel to limit the maximum power the wireless device allowed to transmit on the corresponding channel according to the regulatory domain. Co-developed-by:
-
Leon Yen authored
Update the proper firmware programming sequence to fix GTK rekey offload failure on WPA mixed mode. In the mt76_connac_mcu_key_iter, gtk_tlv->proto should be only set up on pairwise key and gtk_tlk->group_cipher should be only set up on the group key. Otherwise, those parameters required by firmware would be set incorrectly to cause GTK rekey offload failure on WPA mixed mode and then disconnection follows. Fixes: b47e21e7 ("mt76: mt7615: add gtk rekey offload support") Co-developed-by:
Leon Yen <Leon.Yen@mediatek.com> Signed-off-by:
-
Deren Wu authored
The dma would be broken after rmmod flow. There are two different cases causing this issue. 1. dma access without privilege. 2. hw access sequence borken by another context. This patch handle both cases to avoid hw crash. Fixes: 2b9ea5a8 ("mt76: mt7921: add mt7921_dma_cleanup in mt7921_unregister_device") Signed-off-by:
Deren Wu <deren.wu@mediatek.com> Signed-off-by:
-
Ryder Lee authored
Mesh and ad-hoc interfaces allow users to set mcast rate through NL80211_ATTR_MCAST_RATE, so rework mt76_default_basic_rate() to adapt that. Signed-off-by:
-
Shayne Chen authored
The bit fields of tx rate idx should be 6 bits, otherwise it might be incorrect in HT mode. For VHT/HE rates, only 4 bits are actually used by rate idx, the other 2 bits are used for other functions. Fixes: c31d94af ("mt76: mt7915: fix tx rate related fields in tx descriptor") Signed-off-by:
-
Shayne Chen authored
Switch proper tx arbiter mode during testmode tx to prevent from entering the flow of normal tx in FW. Also, testmode SU and MU tx need to use different arbiter mode. Signed-off-by:
-
Shayne Chen authored
If total eeprom size is divisible by per-page size, the i in for loop will exceed max page index, which happens in our newer chipset. Fixes: 26f18380 ("mt76: mt7915: add support for flash mode") Signed-off-by:
Bo Jiao <bo.jiao@mediatek.com> Signed-off-by:
-
Ryder Lee authored
The firmware rate control may choose the high rate for EAPOL frames, so checking IEEE80211_TX_CTL_USE_MINRATE to use the lowest TX rate. Signed-off-by:
-
Ryder Lee authored
The firmware rate control may choose the high rate for EAPOL frames, so checking IEEE80211_TX_CTL_USE_MINRATE to use the lowest TX rate. Signed-off-by:
-
Ryder Lee authored
With this patch, users can set the trigger/restore temperature for thermal service according to their use cases. Signed-off-by:
-
Deren Wu authored
Add new chip mt7922 in mt7921 module with following items 1. new chip ID / fw bin name 2. is_mt7922() check chip type for different fw files 3. mt7921_get_data_mode() check security type of fw (backward compatible) Co-developed-by:
Jimmy Hu <Jimmy.Hu@mediatek.com> Signed-off-by:
-
Felix Fietkau authored
When clearing all existing pending tx slots, mt76_tx_complete_skb needs to be used to free the skbs, to ensure that they are cleared from the status list as well. Cc: stable@vger.kernel.org Signed-off-by: -
Deren Wu authored
The acceptable event report should inlcude original CMD-ID. Otherwise, drop unexpected result from fw. Fixes: 1c099ab4 ("mt76: mt7921: add MCU support") Signed-off-by:
-
Sean Wang authored
Fix the current driver mgmt frame is not respecting the basic rates field provided by the AP and then unconditionally is using the lowest (1 or 6 Mbps) rate. For example, if the AP only supported basic rate {24, 36, 48, 54} Mbps, mt7921 cannot send mgmt frame with the rate not in the group. So, instead, we pick up the lowest basic rate the AP can support to send. Fixes: e57b7901 ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets") Suggested-by: -
Sean Wang authored
Fix the current driver mgmt frame is not respecting the basic rates field provided by the AP and then unconditionally is using the lowest (1 or 6 Mbps) rate. For example, if the AP only supported basic rate {24, 36, 48, 54} Mbps, mt7921 cannot send mgmt frame with the rate not in the group. So, instead, we pick up the lowest basic rate the AP can support to send. Fixes: 163f4d22 ("mt76: mt7921: add MAC support") Signed-off-by: -
Sean Wang authored
add mt76_default_basic_rate to mt76 core more devices can rely on to send frames which require the rate in the basic rates. Suggested-by:
-
Lorenzo Bianconi authored
We add the testmode support to access the testmode feature provided by the MT7921 firmware. Tested-by:
-
Ryder Lee authored
mt7915_sta_stats is no longer needed after tx rate reworking. Signed-off-by:
-
Ryder Lee authored
Report tx rate from tx status packets instead of receving periodic mcu event. This improves flexibility, accuracy and AQL performance, and simplifies code flow for better readability. Signed-off-by:
-
