This patch adds unit tests for new JMP32 instructions.

This patch also added the new BPF_JMP32_REG and BPF_JMP32_IMM macros to
samples/bpf/bpf_insn.h so that JMP32 insn builders are available to tests
under 'samples' directory.
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This patch implements code-gen for new JMP32 instructions on NFP.
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This patch implements code-gen for new JMP32 instructions on s390.

Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This patch implements code-gen for new JMP32 instructions on ppc.

For JMP32 | JSET, instruction encoding for PPC_RLWINM_DOT is added to check
the result of ANDing low 32-bit of operands.

Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This patch implements code-gen for new JMP32 instructions on arm.

For JSET, "ands" (AND with flags updated) is used, so corresponding
encoding helper is added.

Cc: Shubham Bansal <illusionist.neo@gmail.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This patch implements code-gen for new JMP32 instructions on arm64.

Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Zi Shen Lim <zlim.lnx@gmail.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This patch implements code-gen for new JMP32 instructions on x32.
Also fixed several reverse xmas tree coding style issues as I am there.

Cc: Wang YanQing <udknight@gmail.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This patch implements code-gen for new JMP32 instructions on x86_64.

Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This patch adds JIT blinds support for JMP32.

Like BPF_JMP_REG/IMM, JMP32 version are needed for building raw bpf insn.
They are added to both include/linux/filter.h and
tools/include/linux/filter.h.
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This patch implements interpreting new JMP32 instructions.
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

The cfg code need to be aware of the new JMP32 instruction class so it
could partition functions correctly.
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This patch teaches disassembler about JMP32. There are two places to
update:

  - Class 0x6 now used by BPF_JMP32, not "unused".

  - BPF_JMP32 need to show comparison operands properly.
    The disassemble format is to add an extra "(32)" before the operands if
    it is a sub-register. A better disassemble format for both JMP32 and
    ALU32 just show the register prefix as "w" instead of "r", this is the
    format using by LLVM assembler.
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This patch teach verifier about the new BPF_JMP32 instruction class.
Verifier need to treat it similar as the existing BPF_JMP class.
A BPF_JMP32 insn needs to go through all checks that have been done on
BPF_JMP.

Also, verifier is doing runtime optimizations based on the extra info
conditional jump instruction could offer, especially when the comparison is
between constant and register that the value range of the register could be
improved based on the comparison results. These code are updated
accordingly.
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

The current min/max code does both signed and unsigned comparisons against
the input argument "val" which is "u64" and there is explicit type casting
when the comparison is signed.

As we will need slightly more complexer type casting when JMP32 introduced,
it is better to host the signed type casting. This makes the code more
clean with ignorable runtime overhead.

Also, code for J*GE/GT/LT/LE and JEQ/JNE are very similar, this patch
combine them.

The main purpose for this refactor is to make sure the min/max code will
still be readable and with minimum code duplication after JMP32 introduced.
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

The new eBPF instruction class JMP32 uses the reserved class number 0x6.
Kernel BPF ISA documentation updated accordingly.
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Björn Töpel says:

====================
This series adds an AF_XDP sock_diag interface for querying sockets
from user-space. Tools like iproute2 ss(8) can use this interface to
list open AF_XDP sockets.

The diagnostic provides information about the Rx/Tx/fill/completetion
rings, umem, memory usage and such. For a complete list, please refer
to the xsk_diag.c file.

The AF_XDP sock_diag interface is optional, and can be built as a
module. A separate patch series, adding ss(8) iproute2 support, will
follow.

v1->v2:
  * Removed extra newline
  * Zero-out all user-space facing structures prior setting the
    members
  * Added explicit "pad" member in _msg struct
  * Removed unused variable "req" in xsk_diag_handler_dump()

Thanks to Daniel for reviewing the series!
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

This patch adds the sock_diag interface for querying sockets from user
space. Tools like iproute2 ss(8) can use this interface to list open
AF_XDP sockets.

The user-space ABI is defined in linux/xdp_diag.h and includes netlink
request and response structs. The request can query sockets and the
response contains socket information about the rings, umems, inode and
more.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

This commit adds an id to the umem structure. The id uniquely
identifies a umem instance, and will be exposed to user-space via the
socket monitoring interface.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Track each AF_XDP socket in a per-netns list. This will be used later
by the sock_diag interface for querying sockets from userspace.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Before:
$ make -s -C tools/testing/selftests/bpf
readelf: Error: Missing knowledge of 32-bit reloc types used in DWARF
sections of machine number 247
readelf: Warning: unable to apply unsupported reloc type 10 to section
.debug_info
readelf: Warning: unable to apply unsupported reloc type 1 to section
.debug_info
readelf: Warning: unable to apply unsupported reloc type 10 to section
.debug_info

After:
$ make -s -C tools/testing/selftests/bpf

v2:
* use llvm-readelf instead of redirecting binutils' readelf stderr to
  /dev/null
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

This adds the ability to read gso_segs from a BPF program.

v3: Use BPF_REG_AX instead of BPF_REG_TMP for the temporary register,
    as suggested by Martin.

v2: refined Eddie Hao patch to address Alexei feedback.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Eddie Hao <eddieh@google.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

When 'bpftool feature' is executed it shows incorrect help string.

test# bpftool feature
Usage: bpftool bpftool probe [COMPONENT] [macros [prefix PREFIX]]
       bpftool bpftool help

       COMPONENT := { kernel | dev NAME }

Instead of fixing the help text by tweaking argv[] indices, this
patch changes the default action to 'probe'. It makes the behavior
consistent with other subcommands, where first subcommand without
extra parameter results in 'show' action.
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Jakub Kicinski says:

====================
This set adds support for complete removal of dead code.

Patch 3 contains all the code removal logic, patches 2 and 4
additionally optimize branches around and to dead code.

Patches 6 and 7 allow offload JITs to take advantage of the
optimization.  After a few small clean ups (8, 9, 10) nfp
support is added (11, 12).

Removing code directly in the verifier makes it easy to adjust
the relevant metadata (line info, subprogram info).  JITs for
code store constrained architectures would have hard time
performing such adjustments at JIT level.  Removing subprograms
or line info is very hard once BPF core finished the verification.
For user space to perform dead code removal it would have to perform
the execution simulation/analysis similar to what the verifier does.

v3:
 - fix uninitilized var warning in GCC 6 (buildbot).
v4:
 - simplify the linfo-keeping logic (Yonghong).  Instead of
   trying to figure out that we are removing first instruction
   of a subprogram, just always keep last dead line info, if
   first live instruction doesn't have one.
v5:
 - improve comments (Martin Lau).
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Add a verifier callback to the nfp JIT to remove the instructions
the verifier deemed to be dead.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Verifier will now optimize out branches to dead code, implement
the replace_insn callback to take advantage of that optimization.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Instead of passing env->prog->len around, and trying to adjust
for optimized out instructions just save the initial number
of instructions in struct nfp_prog.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

We fail program loading if jump lands on a skipped instruction.
This is for historical reasons, it used to be that we only skipped
instructions optimized out based on prior context, and therefore
the optimization would be buggy if we jumped directly to such
instruction (because the context would be skipped by the jump).

There are cases where instructions can be skipped without any
context, for example there is no point in generating code for:

	 r0 |= 0

We will also soon support dropping dead code, so make the skip
logic differentiate between "optimized with preceding context"
vs other skip types.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Instruction number is meaningless at code gen phase.  The target
of the instruction is overwritten by nfp_fixup_branches().  The
convention is to put the raw offset in target address as a place
holder.  See cmp_* functions.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Let offload JITs know when instructions are replaced and optimized
out, so they can update their state appropriately.  The optimizations
are best effort, if JIT returns an error from any callback verifier
will stop notifying it as state may now be out of sync, but the
verifier continues making progress.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

The communication between the verifier and advanced JITs is based
on instruction indexes.  We have to keep them stable throughout
the optimizations otherwise referring to a particular instruction
gets messy quickly.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Add tests for newly added dead code elimination.  Both verifier
and BTF tests are added.  BTF test infrastructure has to be
extended to be able to account for line info which is eliminated
during dead code removal.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Unconditional branches by 0 instructions are basically noops
but they can result from earlier optimizations, e.g. a conditional
jumps which would never be taken or a conditional jump around
dead code.

Remove those branches.

v0.2:
 - s/opt_remove_dead_branches/opt_remove_nops/ (Jiong).
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Jiong Wang <jiong.wang@netronome.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Instead of overwriting dead code with jmp -1 instructions
remove it completely for root.  Adjust verifier state and
line info appropriately.

v2:
 - adjust func_info (Alexei);
 - make sure first instruction retains line info (Alexei).
v4: (Yonghong)
 - remove unnecessary if (!insn to remove) checks;
 - always keep last line info if first live instruction lacks one.
v5: (Martin Lau)
 - improve and clarify comments.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Loading programs with dead code becomes more and more
common, as people begin to patch constants at load time.
Turn conditional jumps to unconditional ones, to avoid
potential branch misprediction penalty.

This optimization is enabled for privileged users only.

For branches which just fall through we could just mark
them as not seen and have dead code removal take care of
them, but that seems less clean.

v0.2:
 - don't call capable(CAP_SYS_ADMIN) twice (Jiong).
v3:
 - fix GCC warning;
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

In preparation for code removal change parameters to branch
and call adjustment functions to be more universal.  The
current parameters assume we are patching a single instruction
with a longer set.

A diagram may help reading the change, this is for the patch
single case, patching instruction 1 with a replacement of 4:
   ____
0 |____|
1 |____| <-- pos                ^
2 |    | <-- end old  ^         |
3 |    |              |  delta  |  len
4 |____|              |         |  (patch region)
5 |    | <-- end new  v         v
6 |____|

end_old = pos + 1
end_new = pos + delta + 1

If we are before the patch region - curr variable and the target
are fully in old coordinates (hence comparing against end_old).
If we are after the region curr is in new coordinates (hence
the comparison to end_new) but target is in mixed coordinates,
so we just check if it falls before end_new, and if so it needs
the adjustment.

Note that we will not fix up branches which land in removed region
in case of removal, which should be okay, as we are only going to
remove dead code.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

system() is calling shell which should find the appropriate full path
via $PATH. On some systems, full path to iptables and/or nc might be
different that we one we have hardcoded.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

We need to let users check their wrong ELF section name with proper
ELF section names when they fail to get a prog/attach type from it.
Because users can't realize libbpf guess prog/attach types from given
ELF section names. For example, when a 'cgroup' section name of a
BPF program is used, show available ELF section names(types).

Before:

    $ bpftool prog load bpf-prog.o /sys/fs/bpf/prog1
    Error: failed to guess program type based on ELF section name cgroup

After:

    libbpf: failed to guess program type based on ELF section name 'cgroup'
    libbpf: supported section(type) names are: socket kprobe/ kretprobe/ classifier action tracepoint/ raw_tracepoint/ xdp perf_event lwt_in lwt_out lwt_xmit lwt_seg6local cgroup_skb/ingress cgroup_skb/egress cgroup/skb cgroup/sock cgroup/post_bind4 cgroup/post_bind6 cgroup/dev sockops sk_skb/stream_parser sk_skb/stream_verdict sk_skb sk_msg lirc_mode2 flow_dissector cgroup/bind4 cgroup/bind6 cgroup/connect4 cgroup/connect6 cgroup/sendmsg4 cgroup/sendmsg6
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Quentin Monnet <quentin.monnet@netronome.com>
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Andrey Ignatov <rdna@fb.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

This patch added documentation for BTF (BPF Debug Format).
The document is placed under linux:Documentation/bpf directory.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Quentin Monnet says:

====================
Hi,
This set adds a new command to bpftool in order to dump a list of
eBPF-related parameters for the system (or for a specific network
device) to the console. Once again, this is based on a suggestion from
Daniel.

At this time, output includes:

    - Availability of bpf() system call
    - Availability of bpf() system call for unprivileged users
    - JIT status (enabled or not, with or without debugging traces)
    - JIT hardening status
    - JIT kallsyms exports status
    - Global memory limit for JIT compiler for unprivileged users
    - Status of kernel compilation options related to BPF features
    - Availability of known eBPF program types
    - Availability of known eBPF map types
    - Availability of known eBPF helper functions

There are three different ways to dump this information at this time:

    - Plain output dumps probe results in plain text. It is the most
      flexible options for providing descriptive output to the user, but
      should not be relied upon for parsing the output.
    - JSON output is supported.
    - A third mode, available through the "macros" keyword appended to the
      command line, dumps some of those parameters (not all) as a series of
      "#define" directives, that can be included into a C header file for
      example.

Probes for supported program and map types, and supported helpers, are
directly added to libbpf, so that other applications (or selftests) can
reuse them as necessary.

If the user does not have root privileges (or more precisely, the
CAP_SYS_ADMIN capability) detection will be erroneous for most
parameters. Therefore, forbid non-root users to run the command.

v5:
- Move exported symbols to a new LIBBPF_0.0.2 section in libbpf.map
  (patches 4 to 6).
- Minor fixes on patches 3 and 4.

v4:
- Probe bpf_jit_limit parameter (patch 2).
- Probe some additional kernel config options (patch 3).
- Minor fixes on patch 6.

v3:
- Do not probe kernel version in bpftool (just retrieve it to probe support
  for kprobes in libbpf).
- Change the way results for helper support is displayed: now one list of
  compatible helpers for each program type (and C-style output gets a
  HAVE_PROG_TYPE_HELPER(prog_type, helper) macro to help with tests. See
  patches 6, 7.
- Address other comments from feedback from v2 (please refer to individual
  patches' history).

v2 (please also refer to individual patches' history):
- Move probes for prog/map types, helpers, from bpftool to libbpf.
- Move C-style output as a separate patch, and restrict it to a subset of
  collected information (bpf() availability, prog/map types, helpers).
- Now probe helpers with all supported program types, and display a list of
  compatible program types (as supported on the system) for each helper.
- NOT addressed: grouping compilation options for kernel into subsections
  (patch 3) (I don't see an easy way of grouping them at the moment, please
  see also the discussion on v1 thread).
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Add the bash completion related to the newly introduced "bpftool feature
probe" command.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>