- 03 Jan, 2023 22 commits
-
-
Stanley.Yang authored
For GFX 11.0.3, Due to security policy, there is no way to check UcFatalEn field of UMCCH0_0_GeccCtrl to identify UMC poison mode. This is workaround force set umc poison mode as 1 for GFX 11.0.3 Signed-off-by:
Stanley.Yang <Stanley.Yang@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Aric Cyr authored
Acked-by:
Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by:
Aric Cyr <aric.cyr@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
-
Aric Cyr authored
[why & how] By moving bw_ctx field to the end of the dc_state the state can be cleared more efficiently without resulting in large DML memcpy operations, resulting in better mode enumeration performance on some platforms. Acked-by:
Nevenko Stupar <Nevenko.Stupar@amd.com> Tested-by:
-
Leo Chen authored
[Why & How] For certain features, there will be more implementations needed in the if-block. Braces are added as part of the preparation. Acked-by:
Leo Chen <sancchen@amd.com> Reviewed-by:
Charlene Liu <Charlene.Liu@amd.com> Tested-by:
-
Aurabindo Pillai authored
[Why&How] ignore_msa_timing_param is used by SubVP logic to determine if SubVP + DRR is possible. Linux does not support freesync on multi display config, which results in incorrect assumption of VRR support if we set this parameter when VRR is supported, but not enabled. Signed-off-by:
Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by:
-
Wenjing Liu authored
[why] During DP2.1 LL CTS if test equipment requests to change between DP2.1 and DP1.4 link rates, we need to swap between HPO and DIO encoders by remapping encoder resource. [how] Add a function dc resource to update encoder resources and toggle dpms state for all enabled stream associated witht the link under test. Acked-by:
Wenjing Liu <wenjing.liu@amd.com> Reviewed-by:
Jun Lei <Jun.Lei@amd.com> Tested-by:
-
Wenjing Liu authored
[why] Pixel rate div depends on the type of encoder that we are enabling stream with. If we swap between HPO and DIO encoder at the time we call enable stream for the new encoder, we must reprogram pixel rate div based on the new encoder type. Acked-by:
-
Wenjing Liu authored
[why] dccg clock programming shouldn't be part of link hwss programming sequence. The scope of link hwss is limited to encoder and phy programming. Acked-by:
-
Dmytro Laktyushkin authored
This function is meant to be used on multi-edp systems and only makes sense if only links with connected panels are considered. Acked-by:
Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Tested-by:
-
Nicholas Kazlauskas authored
[Why] On some monitors we see a brief flash of corruption during the monitor disable sequence caused by FIFO being disabled in the middle of an active DP stream. [How] Wait until DP vid stream is disabled before turning off the FIFO. The FIFO reset on DP unblank should take care of clearing any FIFO error, if any. Acked-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by:
Syed Hassan <Syed.Hassan@amd.com> Tested-by:
-
Swapnil Patel authored
[Why] DCN301 resource function is missing function pointer to handle cases with unknown plane state. This causes assertion when global state is validated while using swizzle parameter as “DC_UNKNOWN” [How] Add function pointer to handle and patch cases when plane state is unknown. Acked-by:
Swapnil Patel <Swapnil.Patel@amd.com> Reviewed-by:
Sung joon Kim <Sungjoon.Kim@amd.com> Tested-by:
-
Alvin Lee authored
[Description] - Proper phantom pipe disable sequence was missing in commit_planes_for_stream - If disabling phantom pipe, turn on phantom OTG first, and turn off the phantom OTG after the plane is disabled - Also update sequence for enabling / disabling phantom streams (apply_ctx_to_hw). When enabling phantom pipes, enable before doing front end programming for phantom pipes. If disabling phantom pipes, disable after front end programming (i.e. after phantom plane disable) - TODO: Still need to properly handle transition case when a phantom pipe is transitioned directly into a real pipe (need to fully disable the phantom pipe first) Acked-by:
Alvin Lee <Alvin.Lee2@amd.com> Reviewed-by:
-
Alan Liu authored
[Why] - Need error message when failing to allocating secure_display_ctx. - Need to check if secure display context in psp is initialized or not before using it. [How] - Add error message when memory allocation fail. - Add check before accessing psp secure display context. Acked-by:
Alan Liu <HaoPing.Liu@amd.com> Reviewed-by:
Wayne Lin <Wayne.Lin@amd.com> Tested-by:
-
Samson Tam authored
[Why] SwathSizePerSurfaceY[] and SwathSizePerSurfaceC[] values are uninitialized because we are using += instead of = operator. [How] Assign values in loop with = operator. Acked-by:
Samson Tam <samson.tam@amd.com> Reviewed-by:
-
hersen wu authored
[Why] multiple display hdcp are enabled within event_property_validate, event_property_update by looping all displays on mst hub. when one of display on mst hub in unplugged or disabled, hdcp are disabled for all displays on mst hub within hdcp_reset_display by looping all displays of mst link. for displays still active, their encryption status are off. kernel driver will not run hdcp authentication again. therefore, hdcp are not enabled automatically. [How] within is_content_protection_different, check drm_crtc_state changes of all displays on mst hub, if need, triger hdcp_update_display to re-run hdcp authentication. Acked-by:
hersen wu <hersenxs.wu@amd.com> Reviewed-by:
Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Tested-by:
-
Christian König authored
This allows testing the driver without any VRAM. Signed-off-by:
Christian König <christian.koenig@amd.com> Acked-by:
Luben Tuikov <luben.tuikov@amd.com> Acked-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
-
Christian König authored
Centralize the limit handling and validation in one place instead of spreading that around in different hw generations. Signed-off-by:
-
Christian König authored
Rename vram_scratch into mem_scratch and allow allocating it into GTT as well. The only problem with that is that we won't have a default page for the system aperture any more. Signed-off-by:
-
Christian König authored
Technically all of those can use GTT as well, no need to force things into VRAM. Signed-off-by:
-
Saleemkhan Jamadar authored
Enable VCN Dynamic Power Gating control for GC IP v11.0.4. Signed-off-by:
Saleemkhan Jamadar <saleemkhan.jamadar@amd.com> Reviewed-by:
Veerabadhran Gopalakrishnan <veerabadhran.gopalakrishnan@amd.com> Signed-off-by:
-
Likun Gao authored
1.Drop soft reset check when do should recover gpu check. (As it will skip gpu reset operation if some ip is hang but not support soft reset) 2.Check soft reset status before do soft reset when pre asic reset. a. If check soft reset return true, it means: some ip is hang and it also support soft reset, will try soft reset first. b. If check soft reset return false, it means: I. All the ip are not hang, will skip gpu reset. II. Some ip is hang but not support soft reset, will skip soft reset and retry with full reset later. Signed-off-by:Likun Gao <Likun.Gao@amd.com> Reviewed-by:
-
Mukul Joshi authored
This patch fixes the following kernel warning seen during driver load by correctly initializing the p2plink attr before creating the sysfs file: [ +0.002865] ------------[ cut here ]------------ [ +0.002327] kobject: '(null)' (0000000056260cfb): is not initialized, yet kobject_put() is being called. [ +0.004780] WARNING: CPU: 32 PID: 1006 at lib/kobject.c:718 kobject_put+0xaa/0x1c0 [ +0.001361] Call Trace: [ +0.001234] <TASK> [ +0.001067] kfd_remove_sysfs_node_entry+0x24a/0x2d0 [amdgpu] [ +0.003147] kfd_topology_update_sysfs+0x3d/0x750 [amdgpu] [ +0.002890] kfd_topology_add_device+0xbd7/0xc70 [amdgpu] [ +0.002844] ? lock_release+0x13c/0x2e0 [ +0.001936] ? smu_cmn_send_smc_msg_with_param+0x1e8/0x2d0 [amdgpu] [ +0.003313] ? amdgpu_dpm_get_mclk+0x54/0x60 [amdgpu] [ +0.002703] kgd2kfd_device_init.cold+0x39f/0x4ed [amdgpu] [ +0.002930] amdgpu_amdkfd_device_init+0x13d/0x1f0 [amdgpu] [ +0.002944] amdgpu_device_init.cold+0x1464/0x17b4 [amdgpu] [ +0.002970] ? pci_bus_read_config_word+0x43/0x80 [ +0.002380] amdgpu_driver_load_kms+0x15/0x100 [amdgpu] [ +0.002744] amdgpu_pci_probe+0x147/0x370 [amdgpu] [ +0.002522] local_pci_probe+0x40/0x80 [ +0.001896] work_for_cpu_fn+0x10/0x20 [ +0.001892] process_one_work+0x26e/0x5a0 [ +0.002029] worker_thread+0x1fd/0x3e0 [ +0.001890] ? process_one_work+0x5a0/0x5a0 [ +0.002115] kthread+0xea/0x110 [ +0.001618] ? kthread_complete_and_exit+0x20/0x20 [ +0.002422] ret_from_fork+0x1f/0x30 [ +0.001808] </TASK> [ +0.001103] irq event stamp: 59837 [ +0.001718] hardirqs last enabled at (59849): [<ffffffffb30fab12>] __up_console_sem+0x52/0x60 [ +0.004414] hardirqs last disabled at (59860): [<ffffffffb30faaf7>] __up_console_sem+0x37/0x60 [ +0.004414] softirqs last enabled at (59654): [<ffffffffb307d9c7>] irq_exit_rcu+0xd7/0x130 [ +0.004205] softirqs last disabled at (59649): [<ffffffffb307d9c7>] irq_exit_rcu+0xd7/0x130 [ +0.004203] ---[ end trace 0000000000000000 ]--- Fixes: 0f28cca8 ("drm/amdkfd: Extend KFD device topology to surface peer-to-peer links") Signed-off-by:
Mukul Joshi <mukul.joshi@amd.com> Reviewed-by:
-
- 20 Dec, 2022 18 commits
-
-
Tim Huang authored
MES is part of gfxoff and MES suspend and resume are skipped for S0i3. But the mes_self_test call path is still in the amdgpu_device_ip_late_init. it's should also be skipped for s0ix as no hardware re-initialization happened. Besides, mes_self_test will free the BO that triggers a lot of warning messages while in the suspend state. [ 81.656085] WARNING: CPU: 2 PID: 1550 at drivers/gpu/drm/amd/amdgpu/amdgpu_object.c:425 amdgpu_bo_free_kernel+0xfc/0x110 [amdgpu] [ 81.679435] Call Trace: [ 81.679726] <TASK> [ 81.679981] amdgpu_mes_remove_hw_queue+0x17a/0x230 [amdgpu] [ 81.680857] amdgpu_mes_self_test+0x390/0x430 [amdgpu] [ 81.681665] mes_v11_0_late_init+0x37/0x50 [amdgpu] [ 81.682423] amdgpu_device_ip_late_init+0x53/0x280 [amdgpu] [ 81.683257] amdgpu_device_resume+0xae/0x2a0 [amdgpu] [ 81.684043] amdgpu_pmops_resume+0x37/0x70 [amdgpu] [ 81.684818] pci_pm_resume+0x5c/0xa0 [ 81.685247] ? pci_pm_thaw+0x90/0x90 [ 81.685658] dpm_run_callback+0x4e/0x160 [ 81.686110] device_resume+0xad/0x210 [ 81.686529] async_resume+0x1e/0x40 [ 81.686931] async_run_entry_fn+0x33/0x120 [ 81.687405] process_one_work+0x21d/0x3f0 [ 81.687869] worker_thread+0x4a/0x3c0 [ 81.688293] ? process_one_work+0x3f0/0x3f0 [ 81.688777] kthread+0xff/0x130 [ 81.689157] ? kthread_complete_and_exit+0x20/0x20 [ 81.689707] ret_from_fork+0x22/0x30 [ 81.690118] </TASK> [ 81.690380] ---[ end trace 0000000000000000 ]--- v2: make the comment clean and use adev->in_s0ix instead of adev->suspend Signed-off-by:
Tim Huang <tim.huang@amd.com> Reviewed-by:
Mario Limonciello <mario.limonciello@amd.com> Signed-off-by:
-
Srinivasan Shanmugam authored
Fix the following checkpatch checks in amdgpu_dm.c CHECK: Prefer kernel type 'u8' over 'uint8_t' CHECK: Prefer kernel type 'u32' over 'uint32_t' CHECK: Prefer kernel type 'u64' over 'uint64_t' CHECK: Prefer kernel type 's32' over 'int32_t' Signed-off-by:
Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
-
Evan Quan authored
For SMU 13.0.0 and 13.0.7, the output from PMFW is in percent. Driver need to convert that into correct PMW(255) based. Signed-off-by:
Evan Quan <evan.quan@amd.com> Acked-by:
-
hersen wu authored
[Why] connector hdcp properties are lost after display is unplgged from mst hub. connector is destroyed with dm_dp_mst_connector_destroy. when display is plugged back, hdcp is not desired and it wouldnt be enabled. [How] save hdcp properties into hdcp_work within amdgpu_dm_atomic_commit_tail. If the same display is plugged back with same display index, its hdcp properties will be retrieved from hdcp_work within dm_dp_mst_get_modes. Acked-by:
-
Evan Quan authored
To fit the latest PMFW and suppress the warning emerged on driver loading. Signed-off-by:
-
Evan Quan authored
Add the support for WINDOW3D profile mode as for other profile modes. Signed-off-by:
-
Alex Deucher authored
It's also part of gfxoff. Cc: stable@vger.kernel.org # 6.0, 6.1 Reviewed-by:
-
Alex Deucher authored
This reverts commit e5d59cfa. This is no longer needed since we no longer suspend SDMA during S0ix. Reviewed-by:
-
Alex Deucher authored
This reverts commit f543d286. This is no longer needed since we no longer touch SDMA 5.x for s0i3. Reviewed-by:
-
Alex Deucher authored
SDMA 5.x is part of the GFX block so it's controlled via GFXOFF. Skip suspend as it should be handled the same as GFX. v2: drop SDMA 4.x. That requires special handling. Reviewed-by:
Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Signed-off-by:
-
Alex Deucher authored
It's handled by GFXOFF for SDMA 5.x and SMU saves the state on SDMA 4.x. Reviewed-by:
-
Alex Deucher authored
gfxhub registers are part of gfx IP and should not need to be changed. Doing so without disabling gfxoff can hang the gfx IP. v2: add comments explaining why we can skip the interrupt control for S0i3 Reviewed-by: -
Alex Deucher authored
gfxhub registers are part of gfx IP and should not need to be changed. Doing so without disabling gfxoff can hang the gfx IP. v2: add comments explaining why we can skip the interrupt control for S0i3 Reviewed-by: -
Alex Deucher authored
gfxhub registers are part of gfx IP and should not need to be changed. Doing so without disabling gfxoff can hang the gfx IP. v2: add comments explaining why we can skip the interrupt control for S0i3 Reviewed-by: -
Arnd Bergmann authored
The activity_monitor_external[] array is too big to fit on the kernel stack, resulting in this warning with clang: drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu13/smu_v13_0_7_ppt.c:1438:12: error: stack frame size (1040) exceeds limit (1024) in 'smu_v13_0_7_get_power_profile_mode' [-Werror,-Wframe-larger-than] Use dynamic allocation instead. It should also be possible to have single element here instead of the array, but this seems easier. v2: fix up argument to sizeof() (Alex) Fixes: 334682ae ("drm/amd/pm: enable workload type change on smu_v13_0_7") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Arnd Bergmann authored
The .set_odm_combine callback pointer was added twice, causing a harmless -Wextra warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn314/dcn314_optc.c:258:36: error: initialized field overwritten [-Werror=override-init] 258 | .set_odm_combine = optc314_set_odm_combine, | ^~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/../display/dc/dcn314/dcn314_optc.c:258:36: note: (near initialization for 'dcn314_tg_funcs.set_odm_combine') Fixes: 5ade1b95 ("drm/amd/display: Add OTG/ODM functions") Signed-off-by: -
Philip Yang authored
If kfd_process_device_init_vm returns failure after vm is converted to compute vm and vm->pasid set to compute pasid, KFD will not take pdd->drm_file reference. As a result, drm close file handler maybe called to release the compute pasid before KFD process destroy worker to release the same pasid and set vm->pasid to zero, this generates below WARNING backtrace and NULL pointer access. Add helper amdgpu_amdkfd_gpuvm_set_vm_pasid and call it at the last step of kfd_process_device_init_vm, to ensure vm pasid is the original pasid if acquiring vm failed or is the compute pasid with pdd->drm_file reference taken to avoid double release same pasid. amdgpu: Failed to create process VM object ida_free called for id=32770 which is not allocated. WARNING: CPU: 57 PID: 72542 at ../lib/idr.c:522 ida_free+0x96/0x140 RIP: 0010:ida_free+0x96/0x140 Call Trace: amdgpu_pasid_free_delayed+0xe1/0x2a0 [amdgpu] amdgpu_driver_postclose_kms+0x2d8/0x340 [amdgpu] drm_file_free.part.13+0x216/0x270 [drm] drm_close_helper.isra.14+0x60/0x70 [drm] drm_release+0x6e/0xf0 [drm] __fput+0xcc/0x280 ____fput+0xe/0x20 task_work_run+0x96/0xc0 do_exit+0x3d0/0xc10 BUG: kernel NULL pointer dereference, address: 0000000000000000 RIP: 0010:ida_free+0x76/0x140 Call Trace: amdgpu_pasid_free_delayed+0xe1/0x2a0 [amdgpu] amdgpu_driver_postclose_kms+0x2d8/0x340 [amdgpu] drm_file_free.part.13+0x216/0x270 [drm] drm_close_helper.isra.14+0x60/0x70 [drm] drm_release+0x6e/0xf0 [drm] __fput+0xcc/0x280 ____fput+0xe/0x20 task_work_run+0x96/0xc0 do_exit+0x3d0/0xc10 Signed-off-by:
Philip Yang <Philip.Yang@amd.com> Reviewed-by:
-
Philip Yang authored
Should only destroy the ib_mem and let process cleanup worker to free the outstanding BOs. Reset the pointer in pdd->qpd structure, to avoid NULL pointer access in process destroy worker. BUG: kernel NULL pointer dereference, address: 0000000000000010 Call Trace: amdgpu_amdkfd_gpuvm_unmap_gtt_bo_from_kernel+0x46/0xb0 [amdgpu] kfd_process_device_destroy_cwsr_dgpu+0x40/0x70 [amdgpu] kfd_process_destroy_pdds+0x71/0x190 [amdgpu] kfd_process_wq_release+0x2a2/0x3b0 [amdgpu] process_one_work+0x2a1/0x600 worker_thread+0x39/0x3d0 Signed-off-by:
-
