An error occurred fetching the project authors.
- 03 Jun, 2021 2 commits
-
-
Daniele Ceraolo Spurio authored
We have a couple of failure injection points in the CT enablement path, so we need to use i915_probe_error() to select the appropriate log level. A new macro (CT_PROBE_ERROR) has been added to the set of CT logging macros to be used in this scenario and upcoming ones. While adding the new macros, fix the underlying logging mechanics used by the existing ones (DRM_DEV_* -> drm_*) and move the inlines to before they're used inside the macros. Signed-off-by:
Matthew Brost <matthew.brost@intel.com> Signed-off-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by:
Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210603051630.2635-3-matthew.brost@intel.com
-
Daniele Ceraolo Spurio authored
If we're about to sanitize the GuC, something might have going wrong beforehand, so we should avoid trying to talk to it. Even if GuC is still running fine, the sanitize will reset its internal state and clear the CTB registration, so there is still no need to explicitly do so. References: https://gitlab.freedesktop.org/drm/intel/-/issues/2469Signed-off-by:
-
- 02 Jun, 2021 8 commits
-
-
Thomas Hellström authored
Embed a struct ttm_buffer_object into the i915 gem object, making sure we alias the gem object part. It's a bit unfortunate that the struct ttm_buffer_ojbect embeds a gem object since we otherwise could make the TTM part private to the TTM backend, and use the usual i915 gem object for the other backends. To make this a bit more storage efficient for the other backends, we'd have to use a pointer for the gem object which would require a lot of changes in the driver. We postpone that for later. Signed-off-by:
Thomas Hellström <thomas.hellstrom@linux.intel.com> Acked-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210602083818.241793-3-thomas.hellstrom@linux.intel.com
-
Thomas Hellström authored
Temporarily remove the buddy allocator and related selftests and hook up the TTM range manager for i915 regions. Also modify the mock region selftests somewhat to account for a fragmenting manager. Signed-off-by:
-
Matthew Auld authored
This reverts commit b739f125. We are unfortunately seeing more issues like we did in 293837b9 ("Revert "i915: fix remap_io_sg to verify the pgprot""), except this is now for the vm_fault_gtt path, where we are now hitting the same BUG_ON(!pte_none(*pte)): [10887.466150] kernel BUG at mm/memory.c:2183! [10887.466162] invalid opcode: 0000 [#1] PREEMPT SMP PTI [10887.466168] CPU: 0 PID: 7775 Comm: ffmpeg Tainted: G U 5.13.0-rc3-CI-Nightly #1 [10887.466174] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./J4205-ITX, BIOS P1.40 07/14/2017 [10887.466177] RIP: 0010:remap_pfn_range_notrack+0x30f/0x440 [10887.466188] Code: e8 96 d7 e0 ff 84 c0 0f 84 27 01 00 00 48 ba 00 f0 ff ff ff ff 0f 00 4c 89 e0 48 c1 e0 0c 4d 85 ed 75 96 48 21 d0 31 f6 eb a9 <0f> 0b 48 39 37 0f 85 0e 01 00 00 48 8b 0c 24 48 39 4f 08 0f 85 00 [10887.466193] RSP: 0018:ffffc90006e33c50 EFLAGS: 00010286 [10887.466198] RAX: 800000000000002f RBX: 00007f5e01800000 RCX: 0000000000000028 [10887.466201] RDX: 0000000000000001 RSI: ffffea0000000000 RDI: 0000000000000000 [10887.466204] RBP: ffffea000033fea8 R08: 800000000000002f R09: ffff8881072256e0 [10887.466207] R10: ffffc9000b84fff8 R11: 0000000017dab000 R12: 0000000000089f9f [10887.466210] R13: 800000000000002f R14: 00007f5e017e4000 R15: ffff88800cffaf20 [10887.466213] FS: 00007f5e04849640(0000) GS:ffff888278000000(0000) knlGS:0000000000000000 [10887.466216] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [10887.466220] CR2: 00007fd9b191a2ac CR3: 00000001829ac000 CR4: 00000000003506f0 [10887.466223] Call Trace: [10887.466233] vm_fault_gtt+0x1ca/0x5d0 [i915] [10887.466381] ? ktime_get+0x38/0x90 [10887.466389] __do_fault+0x37/0x90 [10887.466395] __handle_mm_fault+0xc46/0x1200 [10887.466402] handle_mm_fault+0xce/0x2a0 [10887.466407] do_user_addr_fault+0x1c5/0x660 Reverting this commit is reported to fix the issue. Reported-by:
Eero Tamminen <eero.t.tamminen@intel.com> References: https://gitlab.freedesktop.org/drm/intel/-/issues/3519 Fixes: b739f125 ("i915: use io_mapping_map_user") Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Zhihao Cheng authored
In case of error, the function live_context() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: 52c0fdb2 ("drm/i915: Replace global breadcrumbs with per-context interrupt tracking") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Zhihao Cheng <chengzhihao1@huawei.com> Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/33c46ef24cd547d0ad21dc106441491a@intel.com [tursulin: Wrap commit text, fix Fixes: tag.] Signed-off-by:
-
YueHaibing authored
Use DEVICE_ATTR_RO() helper instead of plain DEVICE_ATTR(), which makes the code a bit shorter and easier to read. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Reviewed-by:
-
Joonas Lahtinen authored
Pulling in -rc2 fixes and TTM changes that next upcoming patches depend on. Signed-off-by:Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
Dave Airlie authored
Merge tag 'drm-intel-gt-next-2021-05-28' of git://anongit.freedesktop.org/drm/drm-intel into drm-next UAPI Changes: - Add reworked uAPI for DG1 behind CONFIG_BROKEN (Matt A, Abdiel) Driver Changes: - Fix for Gitlab issues #3293 and #3450: Avoid kernel crash on older L-shape memory machines - Add Wa_14010733141 (VDBox SFC reset) for Gen11+ (Aditya) - Fix crash in auto_retire active retire callback due to misalignment (Stephane) - Fix overlay active retire callback alignment (Tvrtko) - Eliminate need to align active retire callbacks (Matt A, Ville, Daniel) - Program FF_MODE2 tuning value for all Gen12 platforms (Caz) - Add Wa_14011060649 for TGL,RKL,DG1 and ADLS (Swathi) - Create stolen memory region from local memory on DG1 (CQ) - Place PD in LMEM on dGFX (Matt A) - Use WC when default state object is allocated in LMEM (Venkata) - Determine the coherent map type based on object location (Venkata) - Use lmem physical addresses for fb_mmap() on discrete (Mohammed) - Bypass aperture on fbdev when LMEM is available (Anusha) - Return error value when displayable BO not in LMEM for dGFX (Mohammed) - Do release kernel context if breadcrumb measure fails (Janusz) - Hide modparams for compiled-out features (Tvrtko) - Apply Wa_22010271021 for all Gen11 platforms (Caz) - Fix unlikely ref count race in arming the watchdog timer (Tvrtko) - Check actual RC6 enable status in PMU (Tvrtko) - Fix a double free in gen8_preallocate_top_level_pdp (Lv) - Use trylock in shrinker for GGTT on BSW VT-d and BXT (Maarten) - Remove erroneous i915_is_ggtt check for I915_GEM_OBJECT_UNBIND_VM_TRYLOCK (Maarten) - Convert uAPI headers to real kerneldoc (Matt A) - Clean up kerneldoc warnings headers (Matt A, Maarten) - Fail driver if LMEM training failed (Matt R) - Avoid div-by-zero on Gen2 (Ville) - Read C0DRB3/C1DRB3 as 16 bits again and add _BW suffix (Ville) - Remove reference to struct drm_device.pdev (Thomas) - Increase separation between GuC and execlists code (Chris, Matt B) - Use might_alloc() (Bernard) - Split DGFX_FEATURES from GEN12_FEATURES (Lucas) - Deduplicate Wa_22010271021 programming on (Jose) - Drop duplicate WaDisable4x2SubspanOptimization:hsw (Tvrtko) - Selftest improvements (Chris, Hsin-Yi, Tvrtko) - Shuffle around init_memory_region for stolen (Matt) - Typo fixes (wengjianfeng) [airlied: fix conflict with fixes in i915_active.c] Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/YLCbBR22BsQ/dpJB@jlahtine-mobl.ger.corp.intel.com
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-next for 5.14: UAPI Changes: * Use DRM driver names for fbdev Cross-subsystem Changes: Core Changes: * Fix leaked DMA handles * Improve documentation around DRM_CLIENT_CAP_* * Cleanups * dp_mst: Use kHz as link-rate unit during init * fourcc: Remove drm_gem_format_name() and drm_format_name_buf * gem-cma: Fix mmap for buffers with write combining * ttm: Don't override pre-set vm_ops; ttm_bo_mmap() removal and cleanups Driver Changes: * drm/amdgpu: Fix hot unplug during suspend; Implement mmap as GEM object function; Use %p4cc format-string modifier; Cleanups * drm/bridge: Cdns: Fix PM reference leak, Cleanups; Lt8912b: Fix Coccinelle warnings; Fix Kconfig dependencies; Fixes and cleanups * drm/hisilicon/kirin: Cleanups * drm/nouveau: Implement mmap as GEM object function * drm/radeon: Implement mmap as GEM object function * drm/rockchip: Remove generic drivers during init; Add scaling for RK3036 win1; Fix missing registers for RK3066 and 3188; Add alpha support for RK3036, RK3066, RK3126 and RK3188; Fixes and cleanups * drm/simpledrm: Use %p4cc: format-string modifier * drm/vmwgfx: Cleanups * fbdev/matrox: Use modern module_init() Signed-off-by:
-
- 01 Jun, 2021 4 commits
-
-
Maarten Lankhorst authored
The platform should exclusively use mmap_offset, one less path to worry about for discrete. Signed-off-by:
-
Thomas Hellström authored
All users of this function actually want the dma segment sizes, but that's not what's calculated. Fix that and rename the function to i915_sg_dma_sizes to reflect what's calculated. Signed-off-by:
-
Thomas Hellström authored
We are currently sharing the VM reservation locks across a number of gem objects with page-table memory. Since TTM will individiualize the reservation locks when freeing objects, including accessing the shared locks, make sure that the shared locks are not freed until that is done. For PPGTT we add an additional refcount, for GGTT we take additional measures to make sure objects sharing the GGTT reservation lock are freed at GGTT takedown Signed-off-by:
-
Thomas Hellström authored
Any sleeping dma_resv lock taken while the vma pages_mutex is held will cause a lockdep splat. Move the i915_gem_object_pin_pages() call out of the pages_mutex critical section. Signed-off-by:
-
- 31 May, 2021 5 commits
-
-
Simon Ser authored
The kernel versions including the following commits are referenced: DRM_CLIENT_CAP_STEREO_3D 61d8e328 ("drm: Add a STEREO_3D capability to the SET_CLIENT_CAP ioctl") DRM_CLIENT_CAP_UNIVERSAL_PLANES 681e7ec7 ("drm: Allow userspace to ask for universal plane list (v2)") c7dbc6c9 ("drm: Remove command line guard for universal planes") DRM_CLIENT_CAP_ATOMIC 88a48e29 ("drm: add atomic properties") 8b72ce15 ("drm: Always enable atomic API") DRM_CLIENT_CAP_ASPECT_RATIO 7595bda2 ("drm: Add DRM client cap for aspect-ratio") DRM_CLIENT_CAP_WRITEBACK_CONNECTORS d67b6a20 ("drm: writeback: Add client capability for exposing writeback connectors") Signed-off-by:
Simon Ser <contact@emersion.fr> Reviewed-by:
Daniel Stone <daniels@collabora.com> Acked-by:
Pekka Paalanen <pekka.paalanen@collabora.com> Link: https://patchwork.freedesktop.org/patch/434202/
-
Simon Ser authored
Make it clear that the client is responsible for enabling ATOMIC prior to enabling WRITEBACK_CONNECTORS. Linkify the reference to ATOMIC. Signed-off-by:
-
Simon Ser authored
In the docs for DRM_CLIENT_CAP_STEREO_3D and DRM_CLIENT_CAP_ASPECT_RATIO, reference the DRM_MODE_FLAG_* defines that get set when the cap is enabled. Signed-off-by:
-
Yu Kuai authored
pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to putting operation will result in reference leak here. Fix it by replacing it with pm_runtime_resume_and_get to keep usage counter balanced. Reported-by:
Yu Kuai <yukuai3@huawei.com> Reviewed-by:
Robert Foss <robert.foss@linaro.org> Signed-off-by:
-
Linus Walleij authored
The Lontium bridge is including legacy header files for GPIO but not using them. Delete the includes. Cc: Adrien Grassein <adrien.grassein@gmail.com> Cc: Robert Foss <robert.foss@linaro.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
Adren Grassein <adrien.grassein@gmail.com> Signed-off-by:
-
- 28 May, 2021 15 commits
-
-
Johan Jonker authored
To reduce memory various Rockchip VOP versions share common reg structures. However more recent added SoCs not always have to same futures as the old ones. Add PX30 missing version info, so all VOP version checks work correct if needed in the future. Signed-off-by:
Johan Jonker <jbx6244@gmail.com> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210131125016.10837-1-jbx6244@gmail.com
-
Colin Ian King authored
The variable bit_per_pix is a u8 and is promoted in the multiplication to an int type and then sign extended to a u64. If the result of the int multiplication is greater than 0x7fffffff then the upper 32 bits will be set to 1 as a result of the sign extension. Avoid this by casting tu_size_reg to u64 to avoid sign extension and also a potential overflow. Fixes: 1a0f7ed3 ("drm/rockchip: cdn-dp: add cdn DP support for rk3399") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Reviewed-by:
Guenter Roeck <groeck@chromium.org> Signed-off-by:
-
Christophe JAILLET authored
'ret' is know to be 0 a this point. Checking the return value of 'phy_init()' and 'phy_set_mode()' was intended instead. So add the missing assignments. Fixes: cca1705c ("drm/rockchip: lvds: Add PX30 support") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Jiapeng Chong authored
Fix the following clang warning: drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c:320:20: warning: unused function 'dsi_set' [-Wunused-function]. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by:
-
Thomas Hebb authored
commit cf6d100d ("drm/rockchip: dsi: add dual mipi support") added this devcnt field and call to component_del(). However, these both appear to be erroneous changes left over from an earlier version of the patch. In the version merged, nothing ever modifies devcnt, meaning component_del() runs unconditionally and in addition to the component_del() calls in dw_mipi_dsi_rockchip_host_detach(). The second call fails to delete anything and produces a warning in dmesg. If we look at the previous version of the patch[1], however, we see that it had logic to calculate devcnt and call component_add() in certain situations. This was removed in v6, and the fact that the deletion code was not appears to have been an oversight. [1] https://patchwork.kernel.org/project/dri-devel/patch/20180821140515.22246-8-heiko@sntech.de/ Fixes: cf6d100d ("drm/rockchip: dsi: add dual mipi support") Cc: stable@vger.kernel.org Signed-off-by:
Thomas Hebb <tommyhebb@gmail.com> Signed-off-by:
-
Thomas Hebb authored
When we first enable the DSI encoder, we currently program some per-chip configuration that we look up in rk3399_chip_data based on the device tree compatible we match. This data configures various parameters of the MIPI lanes, including on RK3399 whether DSI1 is slaved to DSI0 in a dual-mode configuration. It also selects which LCDC (i.e. VOP) to scan out from. This causes a problem in RK3399 dual-mode configurations, though: panel prepare() callbacks run before the encoder gets enabled and expect to be able to write commands to the DSI bus, but the bus isn't fully functional until the lane and master/slave configuration have been programmed. As a result, dual-mode panels (and possibly others too) fail to turn on when the rockchipdrm driver is initially loaded. Because the LCDC mux is the only thing we don't know until enable time (and is the only thing that can ever change), we can actually move most of the initialization to bind() and get it out of the way early. That's what this change does. (Rockchip's 4.4 BSP kernel does it in mode_set(), which also avoids the issue, but bind() seems like the more correct place to me.) Tested on a Google Scarlet board (Acer Chromebook Tab 10), which has a Kingdisplay KD097D04 dual-mode panel. Prior to this change, the panel's backlight would turn on but no image would appear when initially loading rockchipdrm. If I kept rockchipdrm loaded and reloaded the panel driver, it would come on. With this change, the panel successfully turns on during initial rockchipdrm load as expected. Fixes: 2d4f7bda ("drm/rockchip: dsi: migrate to use dw-mipi-dsi bridge driver") Signed-off-by:
Jonathan Liu <net147@gmail.com> Signed-off-by:
-
Peter Robinson authored
The CDP DP component of the rockchip GPU driver requires firmware so define MODULE_FIRMWARE for rockchip/dptx.bin so the details are available in the module info. Signed-off-by:
Peter Robinson <pbrobinson@gmail.com> Signed-off-by:
-
Yang Yingliang authored
After calling clk_prepare_enable(), clk_disable_unprepare() need be called when calling regmap_write() failed. Fixes: 1a0f7ed3 ("drm/rockchip: cdn-dp: add cdn DP support for rk3399") Reported-by:
Yang Yingliang <yangyingliang@huawei.com> Signed-off-by:
-
Alex Bee authored
alpha_en should be set to 0 if it is not used, i.e. to disable alpha blending if it was enabled before and should be disabled now. Fixes: 2aae8ed1 ("drm/rockchip: Add per-pixel alpha support for the PX30 VOP") Signed-off-by:
Alex Bee <knaerzche@gmail.com> Signed-off-by:
-
Alex Bee authored
With commit 2aae8ed1 ("drm/rockchip: Add per-pixel alpha support for the PX30 VOP") alpha support was introduced for PX30's VOP. RK3036, RK3066, RK3126 and RK3188 VOPs support alpha blending in the same manner. With the exception of RK3066 all of them support pre-multiplied alpha. Signed-off-by:
-
Alex Bee authored
Add dither_up, dsp_lut_en and data_blank registers to enable their respective functionality for RK3066's VOP. While at that also fix .rb_swap and .format registers for all windows, which have to be set though RK3066_SYS_CTRL1 register. Also remove .scl from win1: Scaling is only supported on the primary plane. Signed-off-by:
-
Alex Bee authored
Add dither_up, dsp_lut_en and data_blank registers to enable their respective functionality for RK3188's VOP. While at that also fix .dsp_blank register which is (only) set with BIT24 (same as RK3066) Signed-off-by:
-
Alex Bee authored
Add the registers needed to make scaling work on RK3036's win1. Signed-off-by:
-
Javier Martinez Canillas authored
There are drivers that register framebuffer devices very early in the boot process and make use of the existing framebuffer as setup by the firmware. If one of those drivers has registered a fbdev, then the fallback fbdev of the DRM driver won't be bound to the framebuffer console. To avoid that, remove any existing generic driver and take over the graphics device. By doing that, the fb mapped to the console is switched correctly from the early fbdev to the one registered by the rockchip DRM driver: [ 40.752420] fb0: switching to rockchip-drm-fb from EFI VGA Signed-off-by:Javier Martinez Canillas <javierm@redhat.com> Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Tested-by:
-
Paul Cercueil authored
The previous commit wrongly assumed that dma_mmap_wc() could be replaced by pgprot_writecombine() + dma_mmap_pages(). It did work on my setup, but did not work everywhere. Use dma_mmap_wc() when the buffer has the write-combine cache attribute, and dma_mmap_pages() when it has the non-coherent cache attribute. Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Reported-by:
Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by:
-
- 27 May, 2021 6 commits
-
-
Nikola Cornij authored
[why] Link rate in kHz is what is eventually required to calculate the link bandwidth, which makes kHz a more generic unit. This should also make forward-compatibility with new DP standards easier. [how] - Replace 'link rate DPCD code' with 'link rate in kHz' when used with drm_dp_mst_topology_mgr_init() - Add/remove related DPCD code conversion from/to kHz where applicable Signed-off-by:
Nikola Cornij <nikola.cornij@amd.com> Acked-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
Lyude Paul <lyude@redhat.com> Signed-off-by:
-
Aditya Swarup authored
The WA requires the following procedure for VDBox SFC reset: If (MFX-SFC usage is 1) { 1.Issue a MFX-SFC forced lock 2.Wait for MFX-SFC forced lock ack 3.Check the MFX-SFC usage bit If (MFX-SFC usage bit is 1) Reset VDBOX and SFC else Reset VDBOX Release the force lock MFX-SFC } else if(HCP+SFC usage is 1) { 1.Issue a VE-SFC forced lock 2.Wait for SFC forced lock ack 3.Check the VE-SFC usage bit If (VE-SFC usage bit is 1) Reset VDBOX else Reset VDBOX and SFC Release the force lock VE-SFC. } else Reset VDBOX - Restructure: the changes to the original code flow should stay relatively minimal; we only need to do an extra HCP check after the usual VD-MFX check and, if true, switch the register/bit we're performing the lock on.(MattR) v2: - Assign unlock mask using paired_engine->mask instead of using BIT(paired_vecs->id). (Daniele) Bspec: 52890, 53509 Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:Aditya Swarup <aditya.swarup@intel.com> Co-developed-by:
Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
-
Maxime Ripard authored
i915 is broken without -rc3, let's bring that tag in to fix it. Signed-off-by:Maxime Ripard <maxime@cerno.tech>
-
Geert Uytterhoeven authored
The ChromeOS EC ANX7688 bridge is connected to a ChromeOS Embedded Controller, and is accessed using I2C tunneling through the Embedded Controller. Hence add a dependency on I2C_CROS_EC_TUNNEL, to prevent asking the user about this driver when configuring a kernel without support for the ChromeOS EC tunnel I2C bus. Fixes: 44602b10 ("drm/bridge: Add ChromeOS EC ANX7688 bridge driver support") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by:
-
Zou Wei authored
./drivers/gpu/drm/bridge/lontium-lt8912b.c:758:3-8: No need to set .owner here. The core will do it. Remove .owner field if calls are used which set it automatically Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Reported-by:
Zou Wei <zou_wei@huawei.com> Reviewed-by:
-
Jiapeng Chong authored
Eliminate the follow smatch warning: drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c:2143 cdns_mhdp_bridge_atomic_reset() warn: inconsistent indenting. Reported-by:
-
