[ Upstream commit 1ff5fa3c ]

After initially connecting a wired Xbox 360 controller or sending it
a command to change LEDs, a status/response packet is interpreted as
controller input. This causes the state of buttons represented in
byte 2 of the controller data packet to be incorrect until the next
valid input packet. Wireless Xbox 360 controllers are not affected.

Writing a new value to the LED device while holding the Start button
and running jstest is sufficient to reproduce this bug. An event will
come through with the Start button released.

Xboxdrv also won't attempt to read controller input from a packet
where byte 0 is non-zero. It also checks that byte 1 is 0x14, but
that value differs between wired and wireless controllers and this
code is shared by both. I think just checking byte 0 is enough to
eliminate unwanted packets.

The following are some examples of 3-byte status packets I saw:
01 03 02
02 03 00
03 03 03
08 03 00
Signed-off-by: Cameron Gutman <aicommander@gmail.com>
Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit d63b0f0c ]

This adds the VID/PID combination for the Xbox One version of the Mad
Catz FightStick TE 2.

The functionality that this provides is about on par with what the
Windows drivers for the stick manage to deliver.

What works:
- Digital stick
- 6 main buttons
- Xbox button
- The two buttons on the back
- The locking buttons (preventing accidental Xbox button press)

What doesn't work:
- Two of the main buttons (don't work on Windows either)
- The "Haptic" button setting does not have an effect (not sure if it
  works on Windows)

I added the MAP_TRIGGERS_TO_BUTTONS option but in my (limited) testing
there was no practical difference with or without. The FightStick does
not have triggers though so adding it makes sense.
Signed-off-by: Silvan Jegen <s.jegen@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit a6ed4a18 ]

There are two definitions of xpad_identify_controller(), one is used
when CONFIG_JOYSTICK_XPAD_LEDS is set, but the other one is empty
and never used, and we get a gcc warning about it:

drivers/input/joystick/xpad.c:1210:13: warning: 'xpad_identify_controller' defined but not used [-Wunused-function]

This removes the second definition.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: cae705ba ("Input: xpad - re-send LED command on present event")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 95162dc8 ]

Apparently the Covert Forces ID is not Covert Forces pad exclusive, but
rather denotes a new firmware version that can be found on all new
controllers and can be also updated on old hardware using Windows 10.

see: https://github.com/paroj/xpad/issues/19Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit d9be398a ]

When lighting up the segment identifying wireless controller, Instead of
sending command directly to the controller, let's do it via LED API (usinf
led_set_brightness) so that LED object state is in sync with controller
state and we'll light up the correct segment on resume as well.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 4220f7db ]

The irq_out urb is dead after suspend/ resume on my x360 wr pad. (also
reproduced by Zachary Lund [0]) Work around this by implementing
suspend, resume, and reset_resume callbacks and properly shutting down
URBs on suspend and restarting them on resume.

[0]: https://github.com/paroj/xpad/issues/6Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 2a6d7527 ]

There's apparently a serial number woven into both input and output
packets; neglecting to specify a valid serial number causes the controller
to ignore the rumble packets.

The scale of the rumble was also apparently halved in the packets.

The initialization packet had to be changed to allow force feedback to
work.

see https://github.com/paroj/xpad/issues/7 for details.
Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 09c8b00a ]

Handle the "a new device is present" message properly by dynamically
creating the input device at this point in time. This means we now do not
"preallocate" all 4 devices when a single wireless base station is seen.
This requires a workqueue as we are in interrupt context when we learn
about this.

Also properly disconnect any devices that we are told are removed.
Signed-off-by: "Pierre-Loup A. Griffais" <pgriffais@valvesoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 93a017aa ]

When powering up a wireless xbox 360 controller, some wrong joystick
events are generated. It is annoying because, for example, it makes
unwanted moves in Steam big picture mode's menu.

When my controller is powering up, this packet is received by the
driver:
00000000: 00 0f 00 f0 00 cc ff cf 8b e0 86 6a 68 f0 00 20  ...........jh..
00000010: 13 e3 20 1d 30 03 40 01 50 01 ff ff              .. .0.@.P...

According to xboxdrv userspace driver source code, this packet is only
dumping a serial id and should not be interpreted as joystick events.
This issue can be easily seen with jstest:
$ jstest --event /dev/input/js0

This patch only adds a way to filter out this "serial" packet and as a
result it removes the spurous events.
Signed-off-by: Clement Calmels <clement.calmels@free.fr>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

commit ebaa4b16 upstream.

arvifs list is traversed within data_lock spin_lock in tasklet
context to fill channel information from the corresponding vif.
This means any access to arvifs list for add/del operations
should also be protected with the same spin_lock to avoid the
race. Fix this by performing list add/del on arvfis within the
data_lock. This could fix kernel panic something like the below.

 LR is at ath10k_htt_rx_pktlog_completion_handler+0x100/0xb6c [ath10k_core]
 PC is at ath10k_htt_rx_pktlog_completion_handler+0x1c0/0xb6c [ath10k_core]
 Internal error: Oops: 17 [#1] PREEMPT SMP ARM
 [<bf4857f4>] (ath10k_htt_rx_pktlog_completion_handler+0x2f4/0xb6c [ath10k_core])
 [<bf487540>] (ath10k_htt_txrx_compl_task+0x8b4/0x1188 [ath10k_core])
 [<c00312d4>] (tasklet_action+0x8c/0xec)
 [<c00309a8>] (__do_softirq+0xdc/0x208)
 [<c0030d6c>] (irq_exit+0x84/0xe0)
 [<c005db04>] (__handle_domain_irq+0x80/0xa0)
 [<c00085c4>] (gic_handle_irq+0x38/0x5c)
 [<c0009640>] (__irq_svc+0x40/0x74)

(gdb) list *(ath10k_htt_rx_pktlog_completion_handler+0x1c0)
0x136c0 is in ath10k_htt_rx_h_channel (drivers/net/wireless/ath/ath10k/htt_rx.c:769)
764		struct cfg80211_chan_def def;
765
766		lockdep_assert_held(&ar->data_lock);
767
768		list_for_each_entry(arvif, &ar->arvifs, list) {
769			if (arvif->vdev_id == vdev_id &&
770			    ath10k_mac_vif_chan(arvif->vif, &def) == 0)
771				return def.chan;
772		}
773
Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

(commit 1a381d4a upstream)

Linking the ARM64 defconfig kernel with LLVM lld fails with the error:

  ld.lld: error: unknown argument: -p
  Makefile:1015: recipe for target 'vmlinux' failed

Without this flag, the ARM64 defconfig kernel successfully links with
lld and boots on Dragonboard 410c.

After digging through binutils source and changelogs, it turns out that
-p is only relevant to ancient binutils installations targeting 32-bit
ARM.  binutils accepts -p for AArch64 too, but it's always been
undocumented and silently ignored.  A comment in
ld/emultempl/aarch64elf.em explains that it's "Only here for backwards
compatibility".

Since this flag is a no-op on ARM64, we can safely drop it.
Acked-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit b3681dd5 ]

error_entry and error_exit communicate the user vs. kernel status of
the frame using %ebx.  This is unnecessary -- the information is in
regs->cs.  Just use regs->cs.

This makes error_entry simpler and makes error_exit more robust.

It also fixes a nasty bug.  Before all the Spectre nonsense, the
xen_failsafe_callback entry point returned like this:

        ALLOC_PT_GPREGS_ON_STACK
        SAVE_C_REGS
        SAVE_EXTRA_REGS
        ENCODE_FRAME_POINTER
        jmp     error_exit

And it did not go through error_entry.  This was bogus: RBX
contained garbage, and error_exit expected a flag in RBX.

Fortunately, it generally contained *nonzero* garbage, so the
correct code path was used.  As part of the Spectre fixes, code was
added to clear RBX to mitigate certain speculation attacks.  Now,
depending on kernel configuration, RBX got zeroed and, when running
some Wine workloads, the kernel crashes.  This was introduced by:

    commit 3ac6d8c7 ("x86/entry/64: Clear registers for exceptions/interrupts, to reduce speculation attack surface")

With this patch applied, RBX is no longer needed as a flag, and the
problem goes away.

I suspect that malicious userspace could use this bug to crash the
kernel even without the offending patch applied, though.

[ Historical note: I wrote this patch as a cleanup before I was aware
  of the bug it fixed. ]

[ Note to stable maintainers: this should probably get applied to all
  kernels.  If you're nervous about that, a more conservative fix to
  add xorl %ebx,%ebx; incl %ebx before the jump to error_exit should
  also fix the problem. ]
Reported-and-tested-by: M. Vefa Bicakci <m.v.b@runbox.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Cc: xen-devel@lists.xenproject.org
Fixes: 3ac6d8c7 ("x86/entry/64: Clear registers for exceptions/interrupts, to reduce speculation attack surface")
Link: http://lkml.kernel.org/r/b5010a090d3586b2d6e06c7ad3ec5542d1241c45.1532282627.git.luto@kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 75ca5b22 ]

As EBS does not mean anything reasonable in the context it is used, it
seems like a misspelling for EBX.
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit d397dbe6 ]

Use the new of_get_compatible_child() helper to lookup the mdio child
node instead of using of_find_compatible_node(), which searches the
entire tree from a given start node and thus can return an unrelated
(i.e. non-child) node.

This also addresses a potential use-after-free (e.g. after probe
deferral) as the tree-wide helper drops a reference to its first
argument (i.e. the node of the device being probed).

Fixes: aa09677c ("net: bcmgenet: add MDIO routines")
Cc: stable <stable@vger.kernel.org>     # 3.15
Cc: David S. Miller <davem@davemloft.net>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 5bf59773 ]

Use the new of_get_compatible_child() helper to lookup the nfc child
node instead of using of_find_compatible_node(), which searches the
entire tree from a given start node and thus can return an unrelated
(i.e. non-child) node.

This also addresses a potential use-after-free (e.g. after probe
deferral) as the tree-wide helper drops a reference to its first
argument (i.e. the parent node).

Fixes: e097dc62 ("NFC: nfcmrvl: add UART driver")
Fixes: d8e018c0 ("NFC: nfcmrvl: update device tree bindings for Marvell NFC")
Cc: stable <stable@vger.kernel.org>     # 4.2
Cc: Vincent Cuissard <cuissard@marvell.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 36156f92 ]

Add of_get_compatible_child() helper that can be used to lookup
compatible child nodes.

Several drivers currently use of_find_compatible_node() to lookup child
nodes while failing to notice that the of_find_ functions search the
entire tree depth-first (from a given start node) and therefore can
match unrelated nodes. The fact that these functions also drop a
reference to the node they start searching from (e.g. the parent node)
is typically also overlooked, something which can lead to use-after-free
bugs.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 1a413646 ]

Other filesystems such as ext4, f2fs and ubifs all return ENXIO when
lseek (SEEK_DATA or SEEK_HOLE) requests a negative offset.

man 2 lseek says

:      EINVAL whence  is  not  valid.   Or: the resulting file offset would be
:             negative, or beyond the end of a seekable device.
:
:      ENXIO  whence is SEEK_DATA or SEEK_HOLE, and the file offset is  beyond
:             the end of the file.

Make tmpfs return ENXIO under these circumstances as well.  After this,
tmpfs also passes xfstests's generic/448.

[akpm@linux-foundation.org: rewrite changelog]
Link: http://lkml.kernel.org/r/1540434176-14349-1-git-send-email-yuyufen@huawei.comSigned-off-by: Yufen Yu <yuyufen@huawei.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Hugh Dickins <hughd@google.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 437ccdc8 ]

When VPHN function is not supported and during cpu hotplug event,
kernel prints message 'VPHN function not supported. Disabling
polling...'. Currently it prints on every hotplug event, it floods
dmesg when a KVM guest tries to hotplug huge number of vcpus, let's
just print once and suppress further kernel prints.
Signed-off-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit c2b94c72 ]

gcc 8.1.0 warns with:

kernel/debug/kdb/kdb_support.c: In function ‘kallsyms_symbol_next’:
kernel/debug/kdb/kdb_support.c:239:4: warning: ‘strncpy’ specified bound depends on the length of the source argument [-Wstringop-overflow=]
     strncpy(prefix_name, name, strlen(name)+1);
     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
kernel/debug/kdb/kdb_support.c:239:31: note: length computed here

Use strscpy() with the destination buffer size, and use ellipses when
displaying truncated symbols.

v2: Use strscpy()
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: Jonathan Toppins <jtoppins@redhat.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: kgdb-bugreport@lists.sourceforge.net
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit e3d5e573 ]
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 6ef28a04 ]

Add return value check for voltage scale when ARM clock
rate change fail.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 28c5bcf7 ]

TRACE_INCLUDE_PATH and TRACE_INCLUDE_FILE are used by
<trace/define_trace.h>, so like that #include, they should
be outside #ifdef protection.

They also need to be #undefed before defining, in case multiple trace
headers are included by the same C file.  This became the case on
book3e after commit cf4a6085 ("powerpc/mm: Add missing tracepoint for
tlbie"), leading to the following build error:

   CC      arch/powerpc/kvm/powerpc.o
In file included from arch/powerpc/kvm/powerpc.c:51:0:
arch/powerpc/kvm/trace.h:9:0: error: "TRACE_INCLUDE_PATH" redefined
[-Werror]
  #define TRACE_INCLUDE_PATH .
  ^
In file included from arch/powerpc/kvm/../mm/mmu_decl.h:25:0,
                  from arch/powerpc/kvm/powerpc.c:48:
./arch/powerpc/include/asm/trace.h:224:0: note: this is the location of
the previous definition
  #define TRACE_INCLUDE_PATH asm
  ^
cc1: all warnings being treated as errors
Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Scott Wood <oss@buserror.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 2f31a67f upstream.

USB3 roothub might autosuspend before a plugged USB3 device is detected,
causing USB3 device enumeration failure.

USB3 devices don't show up as connected and enabled until USB3 link trainig
completes. On a fast booting platform with a slow USB3 link training the
link might reach the connected enabled state just as the bus is suspending.

If this device is discovered first time by the xhci_bus_suspend() routine
it will be put to U3 suspended state like the other ports which failed to
suspend earlier.

The hub thread will notice the connect change and resume the bus,
moving the port back to U0

This U0 -> U3 -> U0 transition right after being connected seems to be
too much for some devices, causing them to first go to SS.Inactive state,
and finally end up stuck in a polling state with reset asserted

Fix this by failing the bus suspend if a port has a connect change or is
in a polling state in xhci_bus_suspend().

Don't do any port changes until all ports are checked, buffer all port
changes and only write them in the end if suspend can proceed

Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7da11ba5 upstream.

Prior to echoing a successfully transmitted CAN frame (by calling
can_get_echo_skb()), CAN drivers have to put the CAN frame (by calling
can_put_echo_skb() in the transmit function). These put and get function
take an index as parameter, which is used to identify the CAN frame.

A driver calling can_get_echo_skb() with a index not pointing to a skb
is a BUG, so add an appropriate error message.

Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: dev: __can_get_echo_skb(): Don't crash the kernel if can_priv::echo_skb is accessed out of bounds

commit e7a6994d upstream.

If the "struct can_priv::echo_skb" is accessed out of bounds would lead
to a kernel crash. Better print a sensible warning message instead and
try to recover.

Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 200f5c49 upstream.

This patch replaces the use of "struct can_frame::can_dlc" by "struct
canfd_frame::len" to access the frame's length. As it is ensured that
both structures have a compatible memory layout for this member this is
no functional change. Futher, this compatibility is documented in a
comment.

Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a4310fa2 upstream.

This patch factors out all non sending parts of can_get_echo_skb() into
a seperate function __can_get_echo_skb(), so that it can be re-used in
an upcoming patch.

Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7989b9ee upstream.
Signed-off-by: Y.C. Chen <yc_chen@aspeedtech.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 1a37bd82 upstream.

The value of pitches is not correct while calling mode_set.
The issue we found so far on following system:
- Debian8 with XFCE Desktop
- Ubuntu with KDE Desktop
- SUSE15 with KDE Desktop
Signed-off-by: Y.C. Chen <yc_chen@aspeedtech.com>
Cc: <stable@vger.kernel.org>
Tested-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 604d415e upstream.

syzkaller triggered a use-after-free [1], caused by a combination of
skb_get() in llc_conn_state_process() and usage of sk_eat_skb()

sk_eat_skb() is assuming the skb about to be freed is only used by
the current thread. TCP/DCCP stacks enforce this because current
thread holds the socket lock.

llc_conn_state_process() wants to make sure skb does not disappear,
and holds a reference on the skb it manipulates. But as soon as this
skb is added to socket receive queue, another thread can consume it.

This means that llc must use regular skb_unlink() and kfree_skb()
so that both producer and consumer can safely work on the same skb.

[1]
BUG: KASAN: use-after-free in atomic_read include/asm-generic/atomic-instrumented.h:21 [inline]
BUG: KASAN: use-after-free in refcount_read include/linux/refcount.h:43 [inline]
BUG: KASAN: use-after-free in skb_unref include/linux/skbuff.h:967 [inline]
BUG: KASAN: use-after-free in kfree_skb+0xb7/0x580 net/core/skbuff.c:655
Read of size 4 at addr ffff8801d1f6fba4 by task ksoftirqd/1/18

CPU: 1 PID: 18 Comm: ksoftirqd/1 Not tainted 4.19.0-rc8+ #295
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1c4/0x2b6 lib/dump_stack.c:113
 print_address_description.cold.8+0x9/0x1ff mm/kasan/report.c:256
 kasan_report_error mm/kasan/report.c:354 [inline]
 kasan_report.cold.9+0x242/0x309 mm/kasan/report.c:412
 check_memory_region_inline mm/kasan/kasan.c:260 [inline]
 check_memory_region+0x13e/0x1b0 mm/kasan/kasan.c:267
 kasan_check_read+0x11/0x20 mm/kasan/kasan.c:272
 atomic_read include/asm-generic/atomic-instrumented.h:21 [inline]
 refcount_read include/linux/refcount.h:43 [inline]
 skb_unref include/linux/skbuff.h:967 [inline]
 kfree_skb+0xb7/0x580 net/core/skbuff.c:655
 llc_sap_state_process+0x9b/0x550 net/llc/llc_sap.c:224
 llc_sap_rcv+0x156/0x1f0 net/llc/llc_sap.c:297
 llc_sap_handler+0x65e/0xf80 net/llc/llc_sap.c:438
 llc_rcv+0x79e/0xe20 net/llc/llc_input.c:208
 __netif_receive_skb_one_core+0x14d/0x200 net/core/dev.c:4913
 __netif_receive_skb+0x2c/0x1e0 net/core/dev.c:5023
 process_backlog+0x218/0x6f0 net/core/dev.c:5829
 napi_poll net/core/dev.c:6249 [inline]
 net_rx_action+0x7c5/0x1950 net/core/dev.c:6315
 __do_softirq+0x30c/0xb03 kernel/softirq.c:292
 run_ksoftirqd+0x94/0x100 kernel/softirq.c:653
 smpboot_thread_fn+0x68b/0xa00 kernel/smpboot.c:164
 kthread+0x35a/0x420 kernel/kthread.c:246
 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:413

Allocated by task 18:
 save_stack+0x43/0xd0 mm/kasan/kasan.c:448
 set_track mm/kasan/kasan.c:460 [inline]
 kasan_kmalloc+0xc7/0xe0 mm/kasan/kasan.c:553
 kasan_slab_alloc+0x12/0x20 mm/kasan/kasan.c:490
 kmem_cache_alloc_node+0x144/0x730 mm/slab.c:3644
 __alloc_skb+0x119/0x770 net/core/skbuff.c:193
 alloc_skb include/linux/skbuff.h:995 [inline]
 llc_alloc_frame+0xbc/0x370 net/llc/llc_sap.c:54
 llc_station_ac_send_xid_r net/llc/llc_station.c:52 [inline]
 llc_station_rcv+0x1dc/0x1420 net/llc/llc_station.c:111
 llc_rcv+0xc32/0xe20 net/llc/llc_input.c:220
 __netif_receive_skb_one_core+0x14d/0x200 net/core/dev.c:4913
 __netif_receive_skb+0x2c/0x1e0 net/core/dev.c:5023
 process_backlog+0x218/0x6f0 net/core/dev.c:5829
 napi_poll net/core/dev.c:6249 [inline]
 net_rx_action+0x7c5/0x1950 net/core/dev.c:6315
 __do_softirq+0x30c/0xb03 kernel/softirq.c:292

Freed by task 16383:
 save_stack+0x43/0xd0 mm/kasan/kasan.c:448
 set_track mm/kasan/kasan.c:460 [inline]
 __kasan_slab_free+0x102/0x150 mm/kasan/kasan.c:521
 kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528
 __cache_free mm/slab.c:3498 [inline]
 kmem_cache_free+0x83/0x290 mm/slab.c:3756
 kfree_skbmem+0x154/0x230 net/core/skbuff.c:582
 __kfree_skb+0x1d/0x20 net/core/skbuff.c:642
 sk_eat_skb include/net/sock.h:2366 [inline]
 llc_ui_recvmsg+0xec2/0x1610 net/llc/af_llc.c:882
 sock_recvmsg_nosec net/socket.c:794 [inline]
 sock_recvmsg+0xd0/0x110 net/socket.c:801
 ___sys_recvmsg+0x2b6/0x680 net/socket.c:2278
 __sys_recvmmsg+0x303/0xb90 net/socket.c:2390
 do_sys_recvmmsg+0x181/0x1a0 net/socket.c:2466
 __do_sys_recvmmsg net/socket.c:2484 [inline]
 __se_sys_recvmmsg net/socket.c:2480 [inline]
 __x64_sys_recvmmsg+0xbe/0x150 net/socket.c:2480
 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

The buggy address belongs to the object at ffff8801d1f6fac0
 which belongs to the cache skbuff_head_cache of size 232
The buggy address is located 228 bytes inside of
 232-byte region [ffff8801d1f6fac0, ffff8801d1f6fba8)
The buggy address belongs to the page:
page:ffffea000747dbc0 count:1 mapcount:0 mapping:ffff8801d9be7680 index:0xffff8801d1f6fe80
flags: 0x2fffc0000000100(slab)
raw: 02fffc0000000100 ffffea0007346e88 ffffea000705b108 ffff8801d9be7680
raw: ffff8801d1f6fe80 ffff8801d1f6f0c0 000000010000000b 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff8801d1f6fa80: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
 ffff8801d1f6fb00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8801d1f6fb80: fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc
                               ^
 ffff8801d1f6fc00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff8801d1f6fc80: fb fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 4c62bd9c upstream.

When alloc_percpu() fails, sdp gets freed but sb->s_fs_info still points
to the same address. Move the assignment after that error check so that
s_fs_info can only point to a valid sdp or NULL, which is checked for
later in the error path, in gfs2_kill_super().

Reported-by: syzbot+dcb8b3587445007f5808@syzkaller.appspotmail.com
Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit df132eff upstream.

If a transport is removed by asconf but there still are some chunks with
this transport queuing on out_chunk_list, later an use-after-free issue
will be caused when accessing this transport from these chunks in
sctp_outq_flush().

This is an old bug, we fix it by clearing the transport of these chunks
in out_chunk_list when removing a transport in sctp_assoc_rm_peer().

Reported-by: syzbot+56a40ceee5fb35932f4d@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9f2df09a upstream.

syzbot is reporting too large memory allocation at bfs_fill_super() [1].
Since file system image is corrupted such that bfs_sb->s_start == 0,
bfs_fill_super() is trying to allocate 8MB of continuous memory. Fix
this by adding a sanity check on bfs_sb->s_start, __GFP_NOWARN and
printf().

[1] https://syzkaller.appspot.com/bug?id=16a87c236b951351374a84c8a32f40edbc034e96

Link: http://lkml.kernel.org/r/1525862104-3407-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jpSigned-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: syzbot <syzbot+71c6b5d68e91149fc8a4@syzkaller.appspotmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Tigran Aivazian <aivazian.tigran@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 81c99089 upstream.

p9stat_read will call p9stat_free on error, we should only free the
struct content on success.

There also is no need to "p9stat_init" st as the read function will
zero the whole struct for us anyway, so clean up the code a bit while
we are here.

Link: http://lkml.kernel.org/r/1535410108-20650-1-git-send-email-asmadeus@codewreck.orgSigned-off-by: Dominique Martinet <dominique.martinet@cea.fr>
Reported-by: syzbot+d4252148d198410b864f@syzkaller.appspotmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ec484d03 upstream.

The oldest firmware supported by iwlmvm do support getting
the average beacon RSSI. Enable the sta_statistics() call
from mac80211 even on older firmware versions.

Fixes: 33cef925 ("iwlwifi: mvm: support beacon statistics for BSS client")
Cc: stable@vger.kernel.org # 4.2+
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit cb5d2194 upstream.

Sasha has somehow been convinced into helping me with the stable kernel
maintenance.  Codify this slip in good judgement before he realizes what
he really signed up for :)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a5baeaea upstream.

This definition is used by msecs_to_jiffies in milliseconds.
According to the comments, max rexit timeout should be 20ms.
Align with the comments to properly calculate the delay.

Verified on Sunrise Point-LP and Cannon Lake.

Cc: stable@vger.kernel.org
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 22454b79 upstream.

This will clear the USB_PORT_FEAT_C_CONNECTION bit in case of a hub port reset
only if a device is was attached to the hub port before resetting the hub port.

Using a Lenovo T480s attached to the ultra dock it was not possible to detect
some usb-c devices at the dock usb-c ports because the hub_port_reset code
will clear the USB_PORT_FEAT_C_CONNECTION bit after the actual hub port reset.
Using this device combo the USB_PORT_FEAT_C_CONNECTION bit was set between the
actual hub port reset and the clear of the USB_PORT_FEAT_C_CONNECTION bit.
This ends up with clearing the USB_PORT_FEAT_C_CONNECTION bit after the
new device was attached such that it was not detected.

This patch will not clear the USB_PORT_FEAT_C_CONNECTION bit if there is
currently no device attached to the port before the hub port reset.
This will avoid clearing the connection bit for new attached devices.
Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 2278446e upstream.

Hub driver will try to disable a USB3 device twice at logical disconnect,
racing with xhci_free_dev() callback from the first port disable.

This can be triggered with "udisksctl power-off --block-device <disk>"
or by writing "1" to the "remove" sysfs file for a USB3 device
in 4.17-rc4.

USB3 devices don't have a similar disabled link state as USB2 devices,
and use a U3 suspended link state instead. In this state the port
is still enabled and connected.

hub_port_connect() first disconnects the device, then later it notices
that device is still enabled (due to U3 states) it will try to disable
the port again (set to U3).

The xhci_free_dev() called during device disable is async, so checking
for existing xhci->devs[i] when setting link state to U3 the second time
was successful, even if device was being freed.

The regression was caused by, and whole thing revealed by,
Commit 44a182b9 ("xhci: Fix use-after-free in xhci_free_virt_device")
which sets xhci->devs[i]->udev to NULL before xhci_virt_dev() returned.
and causes a NULL pointer dereference the second time we try to set U3.

Fix this by checking xhci->devs[i]->udev exists before setting link state.

The original patch went to stable so this fix needs to be applied there as
well.

Fixes: 44a182b9 ("xhci: Fix use-after-free in xhci_free_virt_device")
Cc: <stable@vger.kernel.org>
Reported-by: Jordan Glover <Golden_Miller83@protonmail.ch>
Tested-by: Jordan Glover <Golden_Miller83@protonmail.ch>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>