- 16 Apr, 2013 27 commits
-
-
Hans Verkuil authored
cx25821-video-upstream_ch2.c/h is practically identical to cx25821-video-upstream.c/h so add support for ch2 into cx25821-video-upstream.c instead. After this we can replace the custom ioctls with a proper write() interface. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
No other changes, just function reordering. Signed-off-by:
-
Hans Verkuil authored
Drop the custom ioctls and enable the video output nodes again, this time using standard ioctls. The next step will be to provide a proper write() interface. Signed-off-by:
-
Hans Verkuil authored
This driver does not have subdevices, so why call subdev ops? After removing that it became apparent that only Composite is supported as input, so remove also any reference to other inputs. Signed-off-by:
-
Hans Verkuil authored
No idea why these custom ioctls exist: they have perfectly normal v4l2 counterparts which are already implemented. Signed-off-by:
-
Hans Verkuil authored
- fill in colorspace - zero priv - delete unsupported formats - fix field handling - s_std should update width/height - proper mapping of width/height to valid resolutions Signed-off-by:
-
Hans Verkuil authored
It is now possible to remove cx25821_fh and replace it with v4l2_fh, which in turn makes event handling and core prio handling possible. Signed-off-by:
-
Hans Verkuil authored
Just remember which filehandle is streaming instead of using complicated resource masks. After this patch we can replace cx25821_fh with v4l2_fh. Signed-off-by:
-
Hans Verkuil authored
This is not a per-filehandle object, it's a per-channel object. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
This allows us to replace .ioctl with .unlocked_ioctl. Signed-off-by:
-
Hans Verkuil authored
The v4l2 core already has support for debugging ioctls/file operations. No need to do that again. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Embed the video_device struct instead of allocating it. Remove some of the annoying and ugly kernel messages shown during loading and unloading of the module. Signed-off-by:
-
Hans Verkuil authored
This driver doesn't use DVB, RC, cx25840 or tveeprom. Signed-off-by:
-
Hans Verkuil authored
This driver does not implement cropping, so remove the cropping ioctls. Signed-off-by:
-
Hans Verkuil authored
A lot of functions and variables were external when they really can be declared as static. Signed-off-by:
-
Hans Verkuil authored
The s_input implementation allowed input 1 even if that didn't exist. Signed-off-by:
-
Hans Verkuil authored
This device list is not necessary. The kernel already has all that information, so just use that instead. Also remove a bogus refcount and some dead 'private_free' code in the alsa driver. Signed-off-by:
-
Hans Verkuil authored
And get rid of the channel0-11 external pointers and two more unused fields in cx25821.h. Signed-off-by:
-
Hans Verkuil authored
log_status shouldn't print LOG STATUS lines, the core does that already. Fix querycap version number and add device_caps support. Signed-off-by:
-
Hans Verkuil authored
Do some spring cleaning: - there are no board defines with tuners, so remove bogus tuner support. - tv standard handling has nothing to do with tuners, so keep that. - replace the deprecated current_norm by g_std. - querystd isn't implemented, so remove the ioctl. - remove a bunch of unused fields in cx25821.h Signed-off-by:
-
Hans Verkuil authored
This device does not support radio or vbi, so remove anything referring to that. In addition, the driver created an 'video ioctl' node, which was unused and was effectively identical to the first video node. This bogus video node is now removed, leaving us with 8 video capture nodes and 2 video output nodes. Signed-off-by:
-
Hans Verkuil authored
drivers/media/pci/cx25821/cx25821-video.c: In function ‘cx25821_video_register’: drivers/media/pci/cx25821/cx25821-video.c:518:1: warning: the frame size of 1600 bytes is larger than 1024 bytes [-Wframe-larger-than=] Fixed by just making the struct video_device template static const. Signed-off-by:
-
- 15 Apr, 2013 13 commits
-
-
Hans Verkuil authored
Skip the audio channel when registering the video nodes. This fixes a bug where that incorrectly registered 'video' node was never unregistered. Note: this bug only surfaces if the video output nodes are enabled again after the previous patch disabled them. Signed-off-by:
-
Hans Verkuil authored
The cx25821 driver has support for one audio output channel and two video output channels. This is implemented in a very ugly and very evil way through a custom ioctl that passes the filename of a file containing the video data, which is then read by the driver itself using vfs. There are a number of problems with this: 1) it's very ugly and very evil (I can't say that often enough). 2) V4L2 supports video output, so why not use that? 3) it's very buggy, closing the filehandle through which you passed the ioctl will oops the kernel. 4) it's a nasty security leak since this allows you to load any file in the system as a video or audio source, so in theory you can output /etc/passwd to audio or video out and record & decode it on another device. Because of all these issues we no longer register those output video nodes. Signed-off-by:
-
Mauro Carvalho Chehab authored
drivers/media/dvb-frontends/cxd2820r_t2.c: In function 'cxd2820r_set_frontend_t2': drivers/media/dvb-frontends/cxd2820r_t2.c:128:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] Signed-off-by: -
Lad, Prabhakar authored
As of now TI has no maintainer/supporter for davinci media drivers, Until it has any I'll be maintaining it. Signed-off-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Antti Palosaari authored
Map RC_MAP_REDDO to that device. Signed-off-by:
-
Antti Palosaari authored
It is very similar than rc-msi-digivox-iii but new keytable is needed as there is one existing scancode mapped to different button. Also that one has less buttons. NEC extended protocol with address 0x61d6. Signed-off-by:
-
Seung-Woo Kim authored
The length of mmap() can be bigger than length of vb2 buffer, so it should be checked. Signed-off-by:
Seung-Woo Kim <sw0312.kim@samsung.com> Acked-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Antti Palosaari authored
Driver author has disappeared, even mails are bouncing back. I will keep care with that as I have done for a while. Signed-off-by:
-
Antti Palosaari authored
I have the hardware and I have already made almost all changes what are needed during the recent few years, so lets mark it as maintained. Signed-off-by:
-
Wei Yongjun authored
Since rc_unregister_device() frees its argument, the subsequently call to rc_free_device() on the same variable will cause a double free bug. Fix by set argument to NULL, thus when fall through to rc_free_device(), nothing will be done there. Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
-
Wei Yongjun authored
Since rc_unregister_device() frees its argument, the subsequently call to rc_free_device() on the same variable will cause a double free bug. Fix by set argument to NULL, thus when fall through to rc_free_device(), nothing will be done there. Signed-off-by:
-
Wei Yongjun authored
Since rc_unregister_device() frees its argument, the subsequently call to rc_free_device() on the same variable will cause a double free bug. Fix by set argument to NULL, thus when fall through to rc_free_device(), nothing will be done there. Signed-off-by:
-
