Cleanup, remove num_ from num_nodes_per_pkg, num_cores_per_node, and
num_threads_per_node.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>

turbostat incorrectly assumes that there is one node per package.  As a
result num_cores_per_pkg is not correctly named and is actually
num_cores_per_node.

Rename num_cores_per_pkg to num_cores_per_node.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>

The code can be simplified if the cpu_topology *cpus tracks the thread
IDs.  This removes an additional file lookup and simplifies the counter
initialization code.

Add thread ID to cpu_topology information and cleanup the counter
initialization code.

v2: prevent thread_id from being overwritten
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>

The code currently assumes each package has exactly one node.  This is not
the case for AMD systems and Intel systems with COD.  AMD systems also
may re-enumerate each node's core IDs starting at 0 (for example, an AMD
processor may have two nodes, each with core IDs from 0 to 7).  In order
to properly enumerate the cores we need to track both the physical and
logical node IDs.

Add physical_node_id to track the node ID assigned by the kernel, and
logical_node_id used by turbostat to track the nodes per package ie) a
0-based count within the package.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>

The turbostat code only looks at thread_siblings_list to determine if
processing units/threads are on the same the core.  This works well on
Intel systems which have a shared L1 instruction and data cache.  This
does not work on AMD systems which have shared L1 instruction cache but
separate L1 data caches.  Other utilities also check sibling's core ID
to determine if the processing unit shares the same core.

Additionally, the cpu_topology *cpus list used in topology_probe() can
be used elsewhere in the code to simplify things.

Export *cpus to the entire turbostat code, and add Processing Unit/Thread
IDs information to each cpu_topology struct.  Confirm that the thread
is on the same core as indicated by thread_siblings_list.

[v2]: Fixup CPU_* usage that caused gcc malloc error.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>

Future fixes will use sysfs files that contain cpumask output.  The code
needs to know the length of the cpumask in order to determine which cpus
are set in a cpumask.  Currently topo.max_cpu_num is the maximum cpu
number.  It can be increased the the maximum value of cpus represented in
cpumasks.

Set max_num_cpus to the length of a cpumask.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>

There's a use case during test to only print specific round of iterations
if --num_iterations is specified, for example, with this patch applied:

turbostat -i 5 -n 4
will capture 4 samples with 5 seconds interval.

[lenb: renamed to --num_iterations from --iterations]
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Reviewed-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

All MSRs related to turbostat are same as Kabylake.
Even though SDM claims that core C3 residency can be read from MSR 0x662,
the read on this MSR fails on CNL platform. Hence disabled C3 MSR read
and display.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

The SNB_C1_AUTO_UNDEMOTE definition should have been deleted once
it was copied into msr-index.h.  One copy of the truth is better --
particularly when Matt needs to fix it:-)
Signed-off-by: Len Brown <len.brown@intel.com>

According to the Intel Software Developers' Manual, Vol. 4, Order No.
335592, these macros have been reversed since they were added in the
initial turbostat commit. The reversed definitions were presumably
copied from turbostat.c to this file.

Fixes: 9c63a650 ("tools/power/x86/turbostat: share kernel MSR #defines")
Signed-off-by: Matt Turner <mattst88@gmail.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Len Brown <len.brown@intel.com>

According to the Intel Software Developers' Manual, Vol. 4, Order No.
335592, these macros have been reversed since they were added.

Fixes: 889facbe ("tools/power turbostat: v3.0: monitor Watts and Temperature")
Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>

Like the "C1" and "C1%" column, the new POLL and POLL% columns
show invocations and residency% during the measurement interval.

While it didn't seem important to track in the past,
we've recently found some Linux cpuidle bugs related to POLL%.
Signed-off-by: Len Brown <len.brown@intel.com>

The column header for PC10 residency is "Pk%pc10"
This is missing the 'g' that others have, eg Pkg%pc6,
to allow tab-delimited columns to fit into 8-columns.

However, --hide Pk%pc10 did not work, it was still looking for the 'g'.
This was confusing, because --list shows the correct "Pk%pc10"
Reported-by: Wendy Wang <wendy.wang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

Linux 4.15 exports the ACPI Low Power Idle Table's
counters in /sys/devices/system/cpu/cpuidle/

low_power_idle_cpu_residency_us

	Show this in the "CPU%LPI" column.

	Today this reflects the "North Complex"
	residency in PC10, so expect it to
	closely follow "Pk%pc10".

low_power_idle_system_residency_us

	Show this in the "SYS%LPI" column.

	Today, this reflects the North is in PC10,
	plus the PCH is sufficiently quiescent
	to save additional power via the "S0ix"
	system state, as measured by the
	PCH SLP_S0 counter.
Signed-off-by: Len Brown <len.brown@intel.com>

rpm-lint flagged these as being executable:

kernel-tools.x86_64: W: spurious-executable-perm /usr/share/man/man8/turbostat.8.gz
kernel-tools.x86_64: W: spurious-executable-perm /usr/share/man/man8/x86_energy_perf_policy.8.gz

Fix this
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>

When the user reuests to collect and show columns
that are not present on every row (eg. for every CPU)
turbostat still prints an (empty) line for every CPU.
Update so no blank lines are printed.

old:
	# turbostat --quiet --show Pkg%pc6
	Pkg%pc6
	9.12
	9.12

	Pkg%pc6
	9.12
	9.12

new:
	# turbostat --quiet --show Pkg%pc6
	Pkg%pc6
	9.12
	9.12
	Pkg%pc6
	9.12
	9.12
Reported-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

Improve readability a little bit by changing this output:

 MSR_PKG_CST_CONFIG_CONTROL: 0x00008407 (locked: pkg-cstate-limit=7: unlimited, automatic-c-state-conversion=off)

with this output:

 MSR_PKG_CST_CONFIG_CONTROL: 0x00008407 (locked, pkg-cstate-limit=7 (unlimited), automatic-c-state-conversion=off)
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

BDX and SKX have a bit that tells them to PROMOTE shallow
C-states requests to MWAIT(C6).  It is generally a BIOS bug
if this bit is set.  As we have encountered that BIOS bug,
let's print this bit in turbostat debug output.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

Some SKX use a 24 MHz crystal, so do not hard code 25 MHz.

Also, SKX crystal is not exact, because SKX uses an EMI reduction
circuit that costs a fraction of a percent.
Signed-off-by: Len Brown <len.brown@intel.com>

Signed-off-by: Len Brown <len.brown@intel.com>

MSR_IA32_MISC_ENABLE[18] is the MWAIT ENABLE bit, not DISABLE bit...

so

MSR_IA32_MISC_ENABLE: 0x00850089 (TCC EIST No-MWAIT PREFETCH TURBO)

should print as:

MSR_IA32_MISC_ENABLE: 0x00850089 (TCC EIST MWAIT PREFETCH TURBO)
Signed-off-by: Len Brown <len.brown@intel.com>

The recent patch that implements table printing on a keypress introduced a
regression - turbostat prints the table almost continuously if it is run from a
daemon program.

The problem is also easy to reproduce like this:

echo | turbostat

The reason is that we cannot assume that stdin is always a TTY. It can be many
things.

This patch adds fixes the problem by limiting the new keypress functionality to
TTYs only. If stdin is not a TTY, we just sleep for the full interval time.

While on it, clean-up 'do_sleep()' to return no value, as callers do not expect
that anyway.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

In turbostat interval mode, a newline typed on standard input
will now conclude the current interval.  Data will immediately
be collected and printed for that interval, and the next interval
will be started.

This is similar to the recently added SIGUSR1 feature.
But that is for use by programs, while this is for interactive use.
Signed-off-by: Len Brown <len.brown@intel.com>

Interval-mode turbostat now catches and discards SIGUSR1.

Thus, SIGUSR1 can be used to tell turbostat to cut short
the current measurement interval.  Turbostat will then start
the next measurement interval using the regular interval length.

This can be used to give turbostat variable intervals.
Invoke turbostat with --interval LARGE_NUMBER_SEC
and have a program that has permission to send it a SIGUSR1
always before LARGE_NUMBER_SEC expires.

It may also be useful to use "--enable Time_Of_Day_Seconds"
to observe the actual interval length.
Signed-off-by: Len Brown <len.brown@intel.com>

When running in interval-mode, catch interrupts
and print a final data record before exiting.
Signed-off-by: Len Brown <len.brown@intel.com>

Add a Time_Of_Day_Seconds column showing when measurement
for each row was completed.  Units are [sec.subsec] since Epoch,
as reported by gettimeofday(2).

While useful to correlate turbostat output with other tools,
this built-in column is disabled, by default.

Add the "--enable" option to enable such disabled-by-default
built-in columns:

"--enable Time_Of_Day_Seconds"
"--enable usec"

"--enable all", will enable all disabled-by-defauilt built-in counters.

When "--debug" is used, all disabled-by-default columns are enabled,
unless explicitly skipped using "--hide"
Signed-off-by: Len Brown <len.brown@intel.com>

Turbostat neglects to display all package C-states for some Skylake Xeon BIOS configurations.

This is due to a typo in the table decoding MSR_PKG_CST_CONFIG_CONTROL (0x000000e2)

Here we fix that typo, according to Intel SDM, vol 4, Table 2-41 -
"MSRs Supported by Intel® Xeon® Processor Scalable Family with DisplayFamily_DisplayModel 06_55H".
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

Signed-off-by: Len Brown <len.brown@intel.com>

Pull xfs fix from Darrick Wong:
 "Clear out i_mapping error state when we're reinitializing inodes.

  This last minute fix prevents writeback error state from persisting
  past the end of the in-core inode lifecycle and causing EIO errors to
  be reported to userspace when no error has occurred.

  This fix for the behavioral regression has been soaking in for-next
  for a while, but various fs developers persuaded me to try to get it
  upstream for 4.17 because the patch that broke things was introduced
  in 4.17-rc4"

* tag 'xfs-4.17-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  fs: clear writeback errors in inode_init_always

Pull x86 platform driver fix from Andy Shevchenko:
 "Fix NULL pointer dereference in asus-wmi on rfkill cleanup.

  The effective change is just one new condition - two lines of code.
  But it required moving one static helper function, which is why the
  diff looks a bit bigger"

* tag 'platform-drivers-x86-v4.17-4' of git://git.infradead.org/linux-platform-drivers-x86:
  platform/x86: asus-wmi: Fix NULL pointer dereference

Do not perform the rfkill cleanup routine when
(asus->driver->wlan_ctrl_by_user && ashs_present()) is true, since
nothing is registered with the rfkill subsystem in that case. Doing so
leads to the following kernel NULL pointer dereference:

  BUG: unable to handle kernel NULL pointer dereference at           (null)
  IP: [<ffffffff816c7348>] __mutex_lock_slowpath+0x98/0x120
  PGD 1a3aa8067
  PUD 1a3b3d067
  PMD 0

  Oops: 0002 [#1] PREEMPT SMP
  Modules linked in: bnep ccm binfmt_misc uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core hid_a4tech videodev x86_pkg_temp_thermal intel_powerclamp coretemp ath3k btusb btrtl btintel bluetooth kvm_intel snd_hda_codec_hdmi kvm snd_hda_codec_realtek snd_hda_codec_generic irqbypass crc32c_intel arc4 i915 snd_hda_intel snd_hda_codec ath9k ath9k_common ath9k_hw ath i2c_algo_bit snd_hwdep mac80211 ghash_clmulni_intel snd_hda_core snd_pcm snd_timer cfg80211 ehci_pci xhci_pci drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm xhci_hcd ehci_hcd asus_nb_wmi(-) asus_wmi sparse_keymap r8169 rfkill mxm_wmi serio_raw snd mii mei_me lpc_ich i2c_i801 video soundcore mei i2c_smbus wmi i2c_core mfd_core
  CPU: 3 PID: 3275 Comm: modprobe Not tainted 4.9.34-gentoo #34
  Hardware name: ASUSTeK COMPUTER INC. K56CM/K56CM, BIOS K56CM.206 08/21/2012
  task: ffff8801a639ba00 task.stack: ffffc900014cc000
  RIP: 0010:[<ffffffff816c7348>]  [<ffffffff816c7348>] __mutex_lock_slowpath+0x98/0x120
  RSP: 0018:ffffc900014cfce0  EFLAGS: 00010282
  RAX: 0000000000000000 RBX: ffff8801a54315b0 RCX: 00000000c0000100
  RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff8801a54315b4
  RBP: ffffc900014cfd30 R08: 0000000000000000 R09: 0000000000000002
  R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801a54315b4
  R13: ffff8801a639ba00 R14: 00000000ffffffff R15: ffff8801a54315b8
  FS:  00007faa254fb700(0000) GS:ffff8801aef80000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000000000000 CR3: 00000001a3b1b000 CR4: 00000000001406e0
  Stack:
   ffff8801a54315b8 0000000000000000 ffffffff814733ae ffffc900014cfd28
   ffffffff8146a28c ffff8801a54315b0 0000000000000000 ffff8801a54315b0
   ffff8801a66f3820 0000000000000000 ffffc900014cfd48 ffffffff816c73e7
  Call Trace:
   [<ffffffff814733ae>] ? acpi_ut_release_mutex+0x5d/0x61
   [<ffffffff8146a28c>] ? acpi_ns_get_node+0x49/0x52
   [<ffffffff816c73e7>] mutex_lock+0x17/0x30
   [<ffffffffa00a3bb4>] asus_rfkill_hotplug+0x24/0x1a0 [asus_wmi]
   [<ffffffffa00a4421>] asus_wmi_rfkill_exit+0x61/0x150 [asus_wmi]
   [<ffffffffa00a49f1>] asus_wmi_remove+0x61/0xb0 [asus_wmi]
   [<ffffffff814a5128>] platform_drv_remove+0x28/0x40
   [<ffffffff814a2901>] __device_release_driver+0xa1/0x160
   [<ffffffff814a29e3>] device_release_driver+0x23/0x30
   [<ffffffff814a1ffd>] bus_remove_device+0xfd/0x170
   [<ffffffff8149e5a9>] device_del+0x139/0x270
   [<ffffffff814a5028>] platform_device_del+0x28/0x90
   [<ffffffff814a50a2>] platform_device_unregister+0x12/0x30
   [<ffffffffa00a4209>] asus_wmi_unregister_driver+0x19/0x30 [asus_wmi]
   [<ffffffffa00da0ea>] asus_nb_wmi_exit+0x10/0xf26 [asus_nb_wmi]
   [<ffffffff8110c692>] SyS_delete_module+0x192/0x270
   [<ffffffff810022b2>] ? exit_to_usermode_loop+0x92/0xa0
   [<ffffffff816ca560>] entry_SYSCALL_64_fastpath+0x13/0x94
  Code: e8 5e 30 00 00 8b 03 83 f8 01 0f 84 93 00 00 00 48 8b 43 10 4c 8d 7b 08 48 89 63 10 41 be ff ff ff ff 4c 89 3c 24 48 89 44 24 08 <48> 89 20 4c 89 6c 24 10 eb 1d 4c 89 e7 49 c7 45 08 02 00 00 00
  RIP  [<ffffffff816c7348>] __mutex_lock_slowpath+0x98/0x120
   RSP <ffffc900014cfce0>
  CR2: 0000000000000000
  ---[ end trace 8d484233fa7cb512 ]---
  note: modprobe[3275] exited with preempt_count 2

https://bugzilla.kernel.org/show_bug.cgi?id=196467

Reported-by: red.f0xyz@gmail.com
Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

In inode_init_always(), we clear the inode mapping flags, which clears
any retained error (AS_EIO, AS_ENOSPC) bits.  Unfortunately, we do not
also clear wb_err, which means that old mapping errors can leak through
to new inodes.

This is crucial for the XFS inode allocation path because we recycle old
in-core inodes and we do not want error state from an old file to leak
into the new file.  This bug was discovered by running generic/036 and
generic/047 in a loop and noticing that the EIOs generated by the
collision of direct and buffered writes in generic/036 would survive the
remount between 036 and 047, and get reported to the fsyncs (on
different files!) in generic/047.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Brian Foster <bfoster@redhat.com>

Pull block fix from Jens Axboe:
 "Just a single fix that should make it into this release, fixing a
  regression with T10-DIF on NVMe"

* tag 'for-linus-20180530' of git://git.kernel.dk/linux-block:
  nvme: fix extended data LBA supported setting

Pull SELinux fix from Paul Moore:
 "One more small fix for SELinux: a small string length fix found by
  KASAN.

  I dislike sending patches this late in the release cycle, but this
  patch fixes a legitimate problem, is very small, limited in scope, and
  well understood.

  There are two threads with more information on the problem, the latest
  is linked below:

    https://marc.info/?t=152723737400001&r=1&w=2

  Stephen points out in the thread linked above:

   'Such a setxattr() call can only be performed by a process with
    CAP_MAC_ADMIN that is also allowed mac_admin permission in SELinux
    policy. Consequently, this is never possible on Android (no process
    is allowed mac_admin permission, always enforcing) and is only
    possible in Fedora/RHEL for a few domains (if enforcing)'"

* tag 'selinux-pr-20180530' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  selinux: KASAN: slab-out-of-bounds in xattr_getsecurity

Pull crypto fix from Herbert Xu:
 "This fixes a potential kernel panic in the inside-secure driver"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: inside-secure - do not use memset on MMIO

Pull s390 fixes from Martin Schwidefsky:

 - a missing -msoft-float for the compile of the kexec purgatory

 - a fix for the dasd driver to avoid the double use of a field in the
   'struct request'

[ That latter one is being discussed, and Christoph asked for something
  cleaner, but for now it's a fix ]

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/dasd: use blk_mq_rq_from_pdu for per request data
  s390/purgatory: Fix endless interrupt loop

Pull input fixes from Dmitry Torokhov:
 "We are switching a bunch of Lenovo devices with Synaptics touchpads
  from PS/2 emulation over to native RMI/SMbus.

  Given that all commits are marked for stable there is no point
  delaying them till next release"

[ Also fix a too-small stack array for i2c communication in elan driver ]

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: elan_i2c_smbus - fix corrupted stack
  Input: synaptics - add Lenovo 80 series ids to SMBus
  Input: synaptics - add Intertouch support on X1 Carbon 6th and X280
  Input: synaptics - Lenovo Thinkpad X1 Carbon G5 (2017) with Elantech trackpoints should use RMI
  Input: synaptics - Lenovo Carbon X1 Gen5 (2017) devices should use RMI

Call trace:
 [<ffffff9203a8d7a8>] dump_backtrace+0x0/0x428
 [<ffffff9203a8dbf8>] show_stack+0x28/0x38
 [<ffffff920409bfb8>] dump_stack+0xd4/0x124
 [<ffffff9203d187e8>] print_address_description+0x68/0x258
 [<ffffff9203d18c00>] kasan_report.part.2+0x228/0x2f0
 [<ffffff9203d1927c>] kasan_report+0x5c/0x70
 [<ffffff9203d1776c>] check_memory_region+0x12c/0x1c0
 [<ffffff9203d17cdc>] memcpy+0x34/0x68
 [<ffffff9203d75348>] xattr_getsecurity+0xe0/0x160
 [<ffffff9203d75490>] vfs_getxattr+0xc8/0x120
 [<ffffff9203d75d68>] getxattr+0x100/0x2c8
 [<ffffff9203d76fb4>] SyS_fgetxattr+0x64/0xa0
 [<ffffff9203a83f70>] el0_svc_naked+0x24/0x28

If user get root access and calls security.selinux setxattr() with an
embedded NUL on a file and then if some process performs a getxattr()
on that file with a length greater than the actual length of the string,
it would result in a panic.

To fix this, add the actual length of the string to the security context
instead of the length passed by the userspace process.
Signed-off-by: Sachin Grover <sgrover@codeaurora.org>
Cc: stable@vger.kernel.org
Signed-off-by: Paul Moore <paul@paul-moore.com>

Pull AFS fixes from David Howells:

 - fix a BUG triggerable from faccessat()

 - fix the mounting of backup volumes

* tag 'afs-fixes-20180529' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  afs: Fix mounting of backup volumes
  afs: Fix directory permissions check

Pull NVMe fix from Christoph:

"Below is a one-liner fix from Max that unbreaks T10-DIF support, which
 got broken in 4.15."

* 'nvme-4.17' of git://git.infradead.org/nvme:
  nvme: fix extended data LBA supported setting