- 12 Jan, 2020 30 commits
-
-
Steven Rostedt (VMware) authored
commit 106f41f5 upstream. The compare functions of the histogram code would be specific for the size of the value being compared (byte, short, int, long long). It would reference the value from the array via the type of the compare, but the value was stored in a 64 bit number. This is fine for little endian machines, but for big endian machines, it would end up comparing zeros or all ones (depending on the sign) for anything but 64 bit numbers. To fix this, first derference the value as a u64 then convert it to the type being compared. Link: http://lkml.kernel.org/r/20191211103557.7bed6928@gandalf.local.home Cc: stable@vger.kernel.org Fixes: 08d43a5f ("tracing: Add lock-free tracing_map") Acked-by:
Tom Zanussi <zanussi@kernel.org> Reported-by:
Sven Schnelle <svens@stackframe.org> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Russell King authored
commit 256efaea upstream. gpiolib has a corner case with open drain outputs that are emulated. When such outputs are outputting a logic 1, emulation will set the hardware to input mode, which will cause gpiod_get_direction() to report that it is in input mode. This is different from the behaviour with a true open-drain output. Unify the semantics here. Cc: <stable@vger.kernel.org> Suggested-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by:
-
Florian Fainelli authored
commit c0cdf2ac upstream. The AHCI resources management within ahci_brcm.c is a little convoluted, largely because it historically had a dedicated clock that was managed within this file in the downstream tree. Once brough upstream though, the clock was left to be managed by libahci_platform.c which is entirely appropriate. This patch series ensures that the AHCI resources are fetched and enabled before any register access is done, thus avoiding bus errors on platforms which clock gate the controller by default. As a result we need to re-arrange the suspend() and resume() functions in order to avoid accessing registers after the clocks have been turned off respectively before the clocks have been turned on. Finally, we can refactor brcm_ahci_get_portmask() in order to fetch the number of ports from hpriv->mmio which is now accessible without jumping through hoops like we used to do. The commit pointed in the Fixes tag is both old and new enough not to require major headaches for backporting of this patch. Fixes: eba68f82 ("ata: ahci_brcmstb: rename to support across Broadcom SoC's") Cc: stable@vger.kernel.org Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Florian Fainelli authored
commit 2b2c47d9 upstream. On BCM63138, we need to reset the AHCI core prior to start utilizing it, grab the reset controller device cookie and do that. Signed-off-by:
-
Florian Fainelli authored
commit 84b032db upstream. This reverts commit 6bb86fef ("libahci_platform: Staticize ahci_platform_<en/dis>able_phys()") we are going to need ahci_platform_{enable,disable}_phys() in a subsequent commit for ahci_brcm.c in order to properly control the PHY initialization order. Also make sure the function prototypes are declared in include/linux/ahci_platform.h as a result. Cc: stable@vger.kernel.org Reviewed-by:
-
Arnd Bergmann authored
commit b2c0fcd2 upstream. These were added to blkdev_ioctl() in linux-5.5 but not blkdev_compat_ioctl, so add them now. Cc: <stable@vger.kernel.org> # v4.4+ Fixes: bbd3e064 ("block: add an API for Persistent Reservations") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Lukas Wunner authored
commit 53a256a9 upstream. dmaengine_desc_set_reuse() allocates a struct dma_slave_caps on the stack, populates it using dma_get_slave_caps() and then accesses one of its members. However dma_get_slave_caps() may fail and this isn't accounted for, leading to a legitimate warning of gcc-4.9 (but not newer versions): In file included from drivers/spi/spi-bcm2835.c:19:0: drivers/spi/spi-bcm2835.c: In function 'dmaengine_desc_set_reuse': >> include/linux/dmaengine.h:1370:10: warning: 'caps.descriptor_reuse' is used uninitialized in this function [-Wuninitialized] if (caps.descriptor_reuse) { Fix it, thereby also silencing the gcc-4.9 warning. The issue has been present for 4 years but surfaces only now that the first caller of dmaengine_desc_set_reuse() has been added in spi-bcm2835.c. Another user of reusable DMA descriptors has existed for a while in pxa_camera.c, but it sets the DMA_CTRL_REUSE flag directly instead of calling dmaengine_desc_set_reuse(). Nevertheless, tag this commit for stable in case there are out-of-tree users. Fixes: 27242021 ("dmaengine: Add DMA_CTRL_REUSE") Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org # v4.3+ Link: https://lore.kernel.org/r/ca92998ccc054b4f2bfd60ef3adbab2913171eac.1575546234.git.lukas@wunner.deSigned-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Amir Goldstein authored
commit 98ca480a upstream. An ino is unsigned, so display it as such in /proc/locks. Cc: stable@vger.kernel.org Signed-off-by:
Amir Goldstein <amir73il@gmail.com> Signed-off-by:
Jeff Layton <jlayton@kernel.org> Signed-off-by:
-
Shakeel Butt authored
commit 84029fd0 upstream. The cred_jar kmem_cache is already memcg accounted in the current kernel but cred->security is not. Account cred->security to kmemcg. Recently we saw high root slab usage on our production and on further inspection, we found a buggy application leaking processes. Though that buggy application was contained within its memcg but we observe much more system memory overhead, couple of GiBs, during that period. This overhead can adversely impact the isolation on the system. One source of high overhead we found was cred->security objects, which have a lifetime of at least the life of the process which allocated them. Link: http://lkml.kernel.org/r/20191205223721.40034-1-shakeelb@google.comSigned-off-by:
Shakeel Butt <shakeelb@google.com> Acked-by:
Chris Down <chris@chrisdown.name> Reviewed-by:
Roman Gushchin <guro@fb.com> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Chanho Min authored
commit ac8f05da upstream. When zspage is migrated to the other zone, the zone page state should be updated as well, otherwise the NR_ZSPAGE for each zone shows wrong counts including proc/zoneinfo in practice. Link: http://lkml.kernel.org/r/1575434841-48009-1-git-send-email-chanho.min@lge.com Fixes: 91537fee ("mm: add NR_ZSMALLOC to vmstat") Signed-off-by:
Chanho Min <chanho.min@lge.com> Signed-off-by:
Jinsuk Choi <jjinsuk.choi@lge.com> Reviewed-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by:
Minchan Kim <minchan@kernel.org> Cc: <stable@vger.kernel.org> [4.9+] Signed-off-by:
-
Paul Burton authored
commit bbcc5672 upstream. Declaring __current_thread_info as a global register variable has the effect of preventing GCC from saving & restoring its value in cases where the ABI would typically do so. To quote GCC documentation: > If the register is a call-saved register, call ABI is affected: the > register will not be restored in function epilogue sequences after the > variable has been assigned. Therefore, functions cannot safely return > to callers that assume standard ABI. When our position independent VDSO is built for the n32 or n64 ABIs all functions it exposes should be preserving the value of $gp/$28 for their caller, but in the presence of the __current_thread_info global register variable GCC stops doing so & simply clobbers $gp/$28 when calculating the address of the GOT. In cases where the VDSO returns success this problem will typically be masked by the caller in libc returning & restoring $gp/$28 itself, but that is by no means guaranteed. In cases where the VDSO returns an error libc will typically contain a fallback path which will now fail (typically with a bad memory access) if it attempts anything which relies upon the value of $gp/$28 - eg. accessing anything via the GOT. One fix for this would be to move the declaration of __current_thread_info inside the current_thread_info() function, demoting it from global register variable to local register variable & avoiding inadvertently creating a non-standard calling ABI for the VDSO. Unfortunately this causes issues for clang, which doesn't support local register variables as pointed out by commit fe92da0f ("MIPS: Changed current_thread_info() to an equivalent supported by both clang and GCC") which introduced the global register variable before we had a VDSO to worry about. Instead, fix this by continuing to use the global register variable for the kernel proper but declare __current_thread_info as a simple extern variable when building the VDSO. It should never be referenced, and will cause a link error if it is. This resolves the calling convention issue for the VDSO without having any impact upon the build of the kernel itself for either clang or gcc. Signed-off-by:
Paul Burton <paulburton@kernel.org> Fixes: ebb5e78c ("MIPS: Initial implementation of a VDSO") Reported-by:
Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by:
-
Takashi Iwai authored
commit 0aec96f5 upstream. Jia-Ju Bai reported a possible sleep-in-atomic scenario in the ice1724 driver with Infrasonic Quartet support code: namely, ice->set_rate callback gets called inside ice->reg_lock spinlock, while the callback in quartet.c holds ice->gpio_mutex. This patch fixes the invalid call: it simply moves the calls of ice->set_rate and ice->set_mclk callbacks outside the spinlock. Reported-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/5d43135e-73b9-a46a-2155-9e91d0dcdf83@gmail.com Link: https://lore.kernel.org/r/20191218192606.12866-1-tiwai@suse.deSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Sasha Levin authored
This reverts commit 59b706ce. This change depends on more changes that didn't exist in 4.9 and older. Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Daniel Vetter authored
[ Upstream commit 5bf8bec3 ] The hardened usercpy code is too paranoid ever since commit 6a30afa8c1fb ("uaccess: disallow > INT_MAX copy sizes") Code itself should have been fine as-is. Link: http://lkml.kernel.org/r/20191106164755.31478-1-daniel.vetter@ffwll.chSigned-off-by:
Daniel Vetter <daniel.vetter@intel.com> Reported-by: syzbot+fb77e97ebf0612ee6914@syzkaller.appspotmail.com Fixes: 6a30afa8c1fb ("uaccess: disallow > INT_MAX copy sizes") Cc: Kees Cook <keescook@chromium.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Christian Brauner authored
[ Upstream commit 0b8d616f ] When assiging and testing taskstats in taskstats_exit() there's a race when setting up and reading sig->stats when a thread-group with more than one thread exits: write to 0xffff8881157bbe10 of 8 bytes by task 7951 on cpu 0: taskstats_tgid_alloc kernel/taskstats.c:567 [inline] taskstats_exit+0x6b7/0x717 kernel/taskstats.c:596 do_exit+0x2c2/0x18e0 kernel/exit.c:864 do_group_exit+0xb4/0x1c0 kernel/exit.c:983 get_signal+0x2a2/0x1320 kernel/signal.c:2734 do_signal+0x3b/0xc00 arch/x86/kernel/signal.c:815 exit_to_usermode_loop+0x250/0x2c0 arch/x86/entry/common.c:159 prepare_exit_to_usermode arch/x86/entry/common.c:194 [inline] syscall_return_slowpath arch/x86/entry/common.c:274 [inline] do_syscall_64+0x2d7/0x2f0 arch/x86/entry/common.c:299 entry_SYSCALL_64_after_hwframe+0x44/0xa9 read to 0xffff8881157bbe10 of 8 bytes by task 7949 on cpu 1: taskstats_tgid_alloc kernel/taskstats.c:559 [inline] taskstats_exit+0xb2/0x717 kernel/taskstats.c:596 do_exit+0x2c2/0x18e0 kernel/exit.c:864 do_group_exit+0xb4/0x1c0 kernel/exit.c:983 __do_sys_exit_group kernel/exit.c:994 [inline] __se_sys_exit_group kernel/exit.c:992 [inline] __x64_sys_exit_group+0x2e/0x30 kernel/exit.c:992 do_syscall_64+0xcf/0x2f0 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this by using smp_load_acquire() and smp_store_release(). Reported-by: syzbot+c5d03165a1bd1dead0c1@syzkaller.appspotmail.com Fixes: 34ec1234 ("taskstats: cleanup ->signal->stats allocation") Cc: stable@vger.kernel.org Signed-off-by:
Christian Brauner <christian.brauner@ubuntu.com> Acked-by:
Marco Elver <elver@google.com> Reviewed-by:
Will Deacon <will@kernel.org> Reviewed-by:
Andrea Parri <parri.andrea@gmail.com> Reviewed-by:
Dmitry Vyukov <dvyukov@google.com> Link: https://lore.kernel.org/r/20191009114809.8643-1-christian.brauner@ubuntu.comSigned-off-by:
-
Brian Foster authored
[ Upstream commit 798a9cad ] syzbot (via KASAN) reports a use-after-free in the error path of xlog_alloc_log(). Specifically, the iclog freeing loop doesn't handle the case of a fully initialized ->l_iclog linked list. Instead, it assumes that the list is partially constructed and NULL terminated. This bug manifested because there was no possible error scenario after iclog list setup when the original code was added. Subsequent code and associated error conditions were added some time later, while the original error handling code was never updated. Fix up the error loop to terminate either on a NULL iclog or reaching the end of the list. Reported-by: syzbot+c732f8644185de340492@syzkaller.appspotmail.com Signed-off-by:
Brian Foster <bfoster@redhat.com> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
-
Andy Whitcroft authored
[ Upstream commit da6043fe ] When looking for a bit by number we make use of the cached result from the preceding lookup to speed up operation. Firstly we check if the requested pfn is within the cached zone and if not lookup the new zone. We then check if the offset for that pfn falls within the existing cached node. This happens regardless of whether the node is within the zone we are now scanning. With certain memory layouts it is possible for this to false trigger creating a temporary alias for the pfn to a different bit. This leads the hibernation code to free memory which it was never allocated with the expected fallout. Ensure the zone we are scanning matches the cached zone before considering the cached node. Deep thanks go to Andrea for many, many, many hours of hacking and testing that went into cornering this bug. Reported-by:
Andrea Righi <andrea.righi@canonical.com> Tested-by:
Andy Whitcroft <apw@canonical.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Juergen Gross authored
[ Upstream commit c673ec61 ] When CONFIG_XEN_BALLOON_MEMORY_HOTPLUG is not defined reserve_additional_memory() will set balloon_stats.target_pages to a wrong value in case there are still some ballooned pages allocated via alloc_xenballooned_pages(). This will result in balloon_process() no longer be triggered when ballooned pages are freed in batches. Reported-by:
Nicholas Tsirakis <niko.tsirakis@gmail.com> Signed-off-by:
Juergen Gross <jgross@suse.com> Reviewed-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
-
Paul Durrant authored
[ Upstream commit fa2ac657 ] Objects allocated by xen_blkif_alloc come from the 'blkif_cache' kmem cache. This cache is destoyed when xen-blkif is unloaded so it is necessary to wait for the deferred free routine used for such objects to complete. This necessity was missed in commit 14855954 "xen-blkback: allow module to be cleanly unloaded". This patch fixes the problem by taking/releasing extra module references in xen_blkif_alloc/free() respectively. Signed-off-by:
Paul Durrant <pdurrant@amazon.com> Reviewed-by:
Roger Pau Monné <roger.pau@citrix.com> Signed-off-by:
-
Parav Pandit authored
[ Upstream commit 89f988d9 ] Current code device add sequence is: ib_register_device() ib_mad_init() init_sriov_init() register_netdev_notifier() Therefore, the remove sequence should be, unregister_netdev_notifier() close_sriov() mad_cleanup() ib_unregister_device() However it is not above. Hence, make do above remove sequence. Fixes: fa417f7b ("IB/mlx4: Add support for IBoE") Signed-off-by:
Parav Pandit <parav@mellanox.com> Reviewed-by:
Maor Gottlieb <maorg@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Link: https://lore.kernel.org/r/20191212091214.315005-3-leon@kernel.orgSigned-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Thomas Richter authored
[ Upstream commit 0539ad0b ] The s390 CPU Measurement sampling facility has an overflow condition which fires when all entries in a SBD are used. The measurement alert interrupt is triggered and reads out all samples in this SDB. It then tests the successor SDB, if this SBD is not full, the interrupt handler does not read any samples at all from this SDB The design waits for the hardware to fill this SBD and then trigger another meassurement alert interrupt. This scheme works nicely until an perf_event_overflow() function call discards the sample due to a too high sampling rate. The interrupt handler has logic to read out a partially filled SDB when the perf event overflow condition in linux common code is met. This causes the CPUM sampling measurement hardware and the PMU device driver to operate on the same SBD's trailer entry. This should not happen. This can be seen here using this trace: cpumsf_pmu_add: tear:0xb5286000 hw_perf_event_update: sdbt 0xb5286000 full 1 over 0 flush_all:0 hw_perf_event_update: sdbt 0xb5286008 full 0 over 0 flush_all:0 above shows 1. interrupt hw_perf_event_update: sdbt 0xb5286008 full 1 over 0 flush_all:0 hw_perf_event_update: sdbt 0xb5286008 full 0 over 0 flush_all:0 above shows 2. interrupt ... this goes on fine until... hw_perf_event_update: sdbt 0xb5286068 full 1 over 0 flush_all:0 perf_push_sample1: overflow one or more samples read from the IRQ handler are rejected by perf_event_overflow() and the IRQ handler advances to the next SDB and modifies the trailer entry of a partially filled SDB. hw_perf_event_update: sdbt 0xb5286070 full 0 over 0 flush_all:1 timestamp: 14:32:52.519953 Next time the IRQ handler is called for this SDB the trailer entry shows an overflow count of 19 missed entries. hw_perf_event_update: sdbt 0xb5286070 full 1 over 19 flush_all:1 timestamp: 14:32:52.970058 Remove access to a follow on SDB when event overflow happened. Signed-off-by:
Thomas Richter <tmricht@linux.ibm.com> Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
-
Thomas Richter authored
[ Upstream commit 39d4a501 ] Function perf_event_ever_overflow() and perf_event_account_interrupt() are called every time samples are processed by the interrupt handler. However function perf_event_account_interrupt() has checks to avoid being flooded with interrupts (more then 1000 samples are received per task_tick). Samples are then dropped and a PERF_RECORD_THROTTLED is added to the perf data. The perf subsystem limit calculation is: maximum sample frequency := 100000 --> 1 samples per 10 us task_tick = 10ms = 10000us --> 1000 samples per task_tick The work flow is measurement_alert() uses SDBT head and each SBDT points to 511 SDB pages, each with 126 sample entries. After processing 8 SBDs and for each valid sample calling: perf_event_overflow() perf_event_account_interrupts() there is a considerable amount of samples being dropped, especially when the sample frequency is very high and near the 100000 limit. To avoid the high amount of samples being dropped near the end of a task_tick time frame, increment the sampling interval in case of dropped events. The CPU Measurement sampling facility on the s390 supports only intervals, specifiing how many CPU cycles have to be executed before a sample is generated. Increase the interval when the samples being generated hit the task_tick limit. Signed-off-by:
-
Zhiqiang Liu authored
[ Upstream commit 028288df ] In raid1_sync_request func, rdev should be checked before reference. Signed-off-by:
Zhiqiang Liu <liuzhiqiang26@huawei.com> Signed-off-by:
Song Liu <songliubraving@fb.com> Signed-off-by:
-
EJ Hsu authored
[ Upstream commit e5b5da96 ] Gadget driver should always use config_ep_by_speed() to initialize usb_ep struct according to usb device's operating speed. Otherwise, usb_ep struct may be wrong if usb devcie's operating speed is changed. The key point in this patch is that we want to make sure the desc pointer in usb_ep struct will be set to NULL when gadget is disconnected. This will force it to call config_ep_by_speed() to correctly initialize usb_ep struct based on the new operating speed when gadget is re-connected later. Reviewed-by:
Peter Chen <peter.chen@nxp.com> Signed-off-by:
EJ Hsu <ejh@nvidia.com> Signed-off-by:
Felipe Balbi <balbi@kernel.org> Signed-off-by:
-
Jason Yan authored
[ Upstream commit f70267f3 ] The discovering of sas port is driven by workqueue in libsas. When libsas is processing port events or phy events in workqueue, new events may rise up and change the state of some structures such as asd_sas_phy. This may cause some problems such as follows: ==>thread 1 ==>thread 2 ==>phy up ==>phy_up_v3_hw() ==>oob_mode = SATA_OOB_MODE; ==>phy down quickly ==>hisi_sas_phy_down() ==>sas_ha->notify_phy_event() ==>sas_phy_disconnected() ==>oob_mode = OOB_NOT_CONNECTED ==>workqueue wakeup ==>sas_form_port() ==>sas_discover_domain() ==>sas_get_port_device() ==>oob_mode is OOB_NOT_CONNECTED and device is wrongly taken as expander This at last lead to the panic when libsas trying to issue a command to discover the device. [183047.614035] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000058 [183047.622896] Mem abort info: [183047.625762] ESR = 0x96000004 [183047.628893] Exception class = DABT (current EL), IL = 32 bits [183047.634888] SET = 0, FnV = 0 [183047.638015] EA = 0, S1PTW = 0 [183047.641232] Data abort info: [183047.644189] ISV = 0, ISS = 0x00000004 [183047.648100] CM = 0, WnR = 0 [183047.651145] user pgtable: 4k pages, 48-bit VAs, pgdp = 00000000b7df67be [183047.657834] [0000000000000058] pgd=0000000000000000 [183047.662789] Internal error: Oops: 96000004 [#1] SMP [183047.667740] Process kworker/u16:2 (pid: 31291, stack limit = 0x00000000417c4974) [183047.675208] CPU: 0 PID: 3291 Comm: kworker/u16:2 Tainted: G W OE 4.19.36-vhulk1907.1.0.h410.eulerosv2r8.aarch64 #1 [183047.687015] Hardware name: N/A N/A/Kunpeng Desktop Board D920S10, BIOS 0.15 10/22/2019 [183047.695007] Workqueue: 0000:74:02.0_disco_q sas_discover_domain [183047.700999] pstate: 20c00009 (nzCv daif +PAN +UAO) [183047.705864] pc : prep_ata_v3_hw+0xf8/0x230 [hisi_sas_v3_hw] [183047.711510] lr : prep_ata_v3_hw+0xb0/0x230 [hisi_sas_v3_hw] [183047.717153] sp : ffff00000f28ba60 [183047.720541] x29: ffff00000f28ba60 x28: ffff8026852d7228 [183047.725925] x27: ffff8027dba3e0a8 x26: ffff8027c05fc200 [183047.731310] x25: 0000000000000000 x24: ffff8026bafa8dc0 [183047.736695] x23: ffff8027c05fc218 x22: ffff8026852d7228 [183047.742079] x21: ffff80007c2f2940 x20: ffff8027c05fc200 [183047.747464] x19: 0000000000f80800 x18: 0000000000000010 [183047.752848] x17: 0000000000000000 x16: 0000000000000000 [183047.758232] x15: ffff000089a5a4ff x14: 0000000000000005 [183047.763617] x13: ffff000009a5a50e x12: ffff8026bafa1e20 [183047.769001] x11: ffff0000087453b8 x10: ffff00000f28b870 [183047.774385] x9 : 0000000000000000 x8 : ffff80007e58f9b0 [183047.779770] x7 : 0000000000000000 x6 : 000000000000003f [183047.785154] x5 : 0000000000000040 x4 : ffffffffffffffe0 [183047.790538] x3 : 00000000000000f8 x2 : 0000000002000007 [183047.795922] x1 : 0000000000000008 x0 : 0000000000000000 [183047.801307] Call trace: [183047.803827] prep_ata_v3_hw+0xf8/0x230 [hisi_sas_v3_hw] [183047.809127] hisi_sas_task_prep+0x750/0x888 [hisi_sas_main] [183047.814773] hisi_sas_task_exec.isra.7+0x88/0x1f0 [hisi_sas_main] [183047.820939] hisi_sas_queue_command+0x28/0x38 [hisi_sas_main] [183047.826757] smp_execute_task_sg+0xec/0x218 [183047.831013] smp_execute_task+0x74/0xa0 [183047.834921] sas_discover_expander.part.7+0x9c/0x5f8 [183047.839959] sas_discover_root_expander+0x90/0x160 [183047.844822] sas_discover_domain+0x1b8/0x1e8 [183047.849164] process_one_work+0x1b4/0x3f8 [183047.853246] worker_thread+0x54/0x470 [183047.856981] kthread+0x134/0x138 [183047.860283] ret_from_fork+0x10/0x18 [183047.863931] Code: f9407a80 528000e2 39409281 72a04002 (b9405800) [183047.870097] kernel fault(0x1) notification starting on CPU 0 [183047.875828] kernel fault(0x1) notification finished on CPU 0 [183047.881559] Modules linked in: unibsp(OE) hns3(OE) hclge(OE) hnae3(OE) mem_drv(OE) hisi_sas_v3_hw(OE) hisi_sas_main(OE) [183047.892418] ---[ end trace 4cc26083fc11b783 ]--- [183047.897107] Kernel panic - not syncing: Fatal exception [183047.902403] kernel fault(0x5) notification starting on CPU 0 [183047.908134] kernel fault(0x5) notification finished on CPU 0 [183047.913865] SMP: stopping secondary CPUs [183047.917861] Kernel Offset: disabled [183047.921422] CPU features: 0x2,a2a00a38 [183047.925243] Memory Limit: none [183047.928372] kernel reboot(0x2) notification starting on CPU 0 [183047.934190] kernel reboot(0x2) notification finished on CPU 0 [183047.940008] ---[ end Kernel panic - not syncing: Fatal exception ]--- Fixes: 2908d778 ("[SCSI] aic94xx: new driver") Link: https://lore.kernel.org/r/20191206011118.46909-1-yanaijie@huawei.comReported-by:
Gao Chuan <gaochuan4@huawei.com> Reviewed-by:
John Garry <john.garry@huawei.com> Signed-off-by:
Jason Yan <yanaijie@huawei.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit fee92f25 ] On this error path we call qla4xxx_mem_free() and then the caller also calls qla4xxx_free_adapter() which calls qla4xxx_mem_free(). It leads to a couple double frees: drivers/scsi/qla4xxx/ql4_os.c:8856 qla4xxx_probe_adapter() warn: 'ha->chap_dma_pool' double freed drivers/scsi/qla4xxx/ql4_os.c:8856 qla4xxx_probe_adapter() warn: 'ha->fw_ddb_dma_pool' double freed Fixes: afaf5a2d ("[SCSI] Initial Commit of qla4xxx") Link: https://lore.kernel.org/r/20191203094421.hw7ex7qr3j2rbsmx@kili.mountainSigned-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Roman Bolshakov authored
[ Upstream commit 2c2f4bed ] MBA_PORT_UPDATE generates duplicate log lines in target mode because qlt_async_event is called twice. Drop the calls within the case as the function will be called right after the switch statement. Cc: Quinn Tran <qutran@marvell.com> Link: https://lore.kernel.org/r/20191125165702.1013-8-r.bolshakov@yadro.comAcked-by:
Himanshu Madhani <hmadhani@marvel.com> Reviewed-by:
Hannes Reinecke <hare@suse.de> Tested-by:
Himanshu Madhani <hmadhani@marvell.com> Signed-off-by:
Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by:
-
Bo Wu authored
[ Upstream commit 9a1b0b9a ] When phba->mbox_ext_buf_ctx.seqNum != phba->mbox_ext_buf_ctx.numBuf, dd_data should be freed before return SLI_CONFIG_HANDLED. When lpfc_sli_issue_mbox func return fails, pmboxq should be also freed in job_error tag. Link: https://lore.kernel.org/r/EDBAAA0BBBA2AC4E9C8B6B81DEEE1D6915E7A966@DGGEML525-MBS.china.huawei.comSigned-off-by:
Bo Wu <wubo40@huawei.com> Reviewed-by:
James Smart <james.smart@broadcom.com> Signed-off-by:
-
Chuhong Yuan authored
[ Upstream commit 44a7b675 ] The driver forgets to call unregister_pernet_subsys() in the error path of cma_init(). Add the missed call to fix it. Fixes: 4be74b42 ("IB/cma: Separate port allocation to network namespaces") Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Reviewed-by:
-
Leonard Crestez authored
[ Upstream commit 42a6b25e ] Right now devfreq_dev_release will print a warning and abort the rest of the cleanup if the devfreq instance is not part of the global devfreq_list. But this is a valid scenario, for example it can happen if the governor can't be found or on any other init error that happens after device_register. Initialize devfreq->node to an empty list head in devfreq_add_device so that list_del becomes a safe noop inside devfreq_dev_release and we can continue the rest of the cleanup. Signed-off-by:
Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by:
Matthias Kaehlcke <mka@chromium.org> Reviewed-by:
Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by:
-
- 04 Jan, 2020 10 commits
-
-
Greg Kroah-Hartman authored
-
Taehee Yoo authored
[ Upstream commit 6a902c0f ] GTP default hashtable size is 1024 and userspace could set specific hashtable size with IFLA_GTP_PDP_HASHSIZE. If hashtable size is set to 0 from userspace, hashtable will not work and panic will occur. Fixes: 459aa660 ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
Taehee Yoo authored
[ Upstream commit 94a6d9fb ] gtp_genl_dump_pdp() is ->dumpit() callback of GTP module and it is used to dump pdp contexts. it would be re-executed because of dump packet size. If dump packet size is too big, it saves current dump pointer (gtp interface pointer, bucket, TID value) then it restarts dump from last pointer. Current GTP code allows adding zero TID pdp context but dump code ignores zero TID value. So, last dump pointer will not be found. In addition, this patch adds missing rcu_read_lock() in gtp_genl_dump_pdp(). Fixes: 459aa660 ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 1f85e626 ] Backport of commit fdfc5c85 ("tcp: remove empty skb from write queue in error cases") in linux-4.14 stable triggered various bugs. One of them has been fixed in commit ba2ddb43f270 ("tcp: Don't dequeue SYN/FIN-segments from write-queue"), but we still have crashes in some occasions. Root-cause is that when tcp_sendmsg() has allocated a fresh skb and could not append a fragment before being blocked in sk_stream_wait_memory(), tcp_write_xmit() might be called and decide to send this fresh and empty skb. Sending an empty packet is not only silly, it might have caused many issues we had in the past with tp->packets_out being out of sync. Fixes: c65f7f00 ("[TCP]: Simplify SKB data portion allocation with NETIF_F_SG.") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Christoph Paasch <cpaasch@apple.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Cc: Jason Baron <jbaron@akamai.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
-
Eric Dumazet authored
commit 8dbd76e7 upstream. Michal Kubecek and Firo Yang did a very nice analysis of crashes happening in __inet_lookup_established(). Since a TCP socket can go from TCP_ESTABLISH to TCP_LISTEN (via a close()/socket()/listen() cycle) without a RCU grace period, I should not have changed listeners linkage in their hash table. They must use the nulls protocol (Documentation/RCU/rculist_nulls.txt), so that a lookup can detect a socket in a hash list was moved in another one. Since we added code in commit d296ba60 ("soreuseport: Resolve merge conflict for v4/v6 ordering fix"), we have to add hlist_nulls_add_tail_rcu() helper. Fixes: 3b24d854 ("tcp/dccp: do not touch listener sk_refcnt under synflood") Signed-off-by:
Michal Kubecek <mkubecek@suse.cz> Reported-by:
Firo Yang <firo.yang@suse.com> Reviewed-by:
-
Stefano Garzarella authored
[ Upstream commit 8a3cc29c ] When we receive a new packet from the guest, we check if the src_cid is correct, but we forgot to check the dst_cid. The host should accept only packets where dst_cid is equal to the host CID. Signed-off-by:
Stefano Garzarella <sgarzare@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Netanel Belgazal authored
[ Upstream commit 24dee0c7 ] In netpoll the napi handler could be called with budget equal to zero. Current ENA napi handler doesn't take that into consideration. The napi handler handles Rx packets in a do-while loop. Currently, the budget check happens only after decrementing the budget, therefore the napi handler, in rare cases, could run over MAX_INT packets. In addition to that, this moves all budget related variables to int calculation and stop mixing u32 to avoid ambiguity Fixes: 1738cd3e ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by:
Netanel Belgazal <netanel@amazon.com> Signed-off-by:
-
Faiz Abbas authored
Tuning support in DDR50 speed mode was added in SD Specifications Part1 Physical Layer Specification v3.01. Its not possible to distinguish between v3.00 and v3.01 from the SCR and that is why since commit 4324f6de ("mmc: core: enable CMD19 tuning for DDR50 mode") tuning failures are ignored in DDR50 speed mode. Cards compatible with v3.00 don't respond to CMD19 in DDR50 and this error gets printed during enumeration and also if retune is triggered at any time during operation. Update the printk level to pr_debug so that these errors don't lead to false error reports. Signed-off-by:
Faiz Abbas <faiz_abbas@ti.com> Cc: stable@vger.kernel.org # v4.4+ Link: https://lore.kernel.org/r/20191206114326.15856-1-faiz_abbas@ti.comSigned-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Hans de Goede authored
[ Upstream commit 40ecab55 ] Commit 39ce8150 ("pinctrl: baytrail: Serialize all register access") added a spinlock around all register accesses because: "There is a hardware issue in Intel Baytrail where concurrent GPIO register access might result reads of 0xffffffff and writes might get dropped completely." Testing has shown that this does not catch all cases, there are still 2 problems remaining 1) The original fix uses a spinlock per byt_gpio device / struct, additional testing has shown that this is not sufficient concurent accesses to 2 different GPIO banks also suffer from the same problem. This commit fixes this by moving to a single global lock. 2) The original fix did not add a lock around the register accesses in the suspend/resume handling. Since pinctrl-baytrail.c is using normal suspend/resume handlers, interrupts are still enabled during suspend/resume handling. Nothing should be using the GPIOs when they are being taken down, _but_ the GPIOs themselves may still cause interrupts, which are likely to use (read) the triggering GPIO. So we need to protect against concurrent GPIO register accesses in the suspend/resume handlers too. This commit fixes this by adding the missing spin_lock / unlock calls. The 2 fixes together fix the Acer Switch 10 SW5-012 getting completely confused after a suspend resume. The DSDT for this device has a bug in its _LID method which reprograms the home and power button trigger- flags requesting both high and low _level_ interrupts so the IRQs for these 2 GPIOs continuously fire. This combined with the saving of registers during suspend, triggers concurrent GPIO register accesses resulting in saving 0xffffffff as pconf0 value during suspend and then when restoring this on resume the pinmux settings get all messed up, resulting in various I2C busses being stuck, the wifi no longer working and often the tablet simply not coming out of suspend at all. Cc: stable@vger.kernel.org Fixes: 39ce8150 ("pinctrl: baytrail: Serialize all register access") Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
David Engraf authored
[ Upstream commit cb47b9f8 ] Use MCK_DIV8 when the clock divider is > 65535. Unfortunately the mode register was already written thus the clock selection is ignored. Fix by doing the baud rate calulation before setting the mode. Fixes: 5bf5635a ("tty/serial: atmel: add fractional baud rate support") Signed-off-by:
David Engraf <david.engraf@sysgo.com> Acked-by:
Ludovic Desroches <ludovic.desroches@microchip.com> Acked-by:
Richard Genoud <richard.genoud@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191216085403.17050-1-david.engraf@sysgo.comSigned-off-by:
-
