I experience issues when putting a lkbsb on the stack and have sb_lvbptr
field to a dangled pointer while not using DLM_LKF_VALBLK. It will crash
with the following kernel message, the dangled pointer is here
0xdeadbeef as example:

[  102.749317] BUG: unable to handle page fault for address: 00000000deadbeef
[  102.749320] #PF: supervisor read access in kernel mode
[  102.749323] #PF: error_code(0x0000) - not-present page
[  102.749325] PGD 0 P4D 0
[  102.749332] Oops: 0000 [#1] PREEMPT SMP PTI
[  102.749336] CPU: 0 PID: 1567 Comm: lock_torture_wr Tainted: G        W         5.19.0-rc3+ #1565
[  102.749343] Hardware name: Red Hat KVM/RHEL-AV, BIOS 1.16.0-2.module+el8.7.0+15506+033991b0 04/01/2014
[  102.749344] RIP: 0010:memcpy_erms+0x6/0x10
[  102.749353] Code: cc cc cc cc eb 1e 0f 1f 00 48 89 f8 48 89 d1 48 c1 e9 03 83 e2 07 f3 48 a5 89 d1 f3 a4 c3 66 0f 1f 44 00 00 48 89 f8 48 89 d1 <f3> a4 c3 0f 1f 80 00 00 00 00 48 89 f8 48 83 fa 20 72 7e 40 38 fe
[  102.749355] RSP: 0018:ffff97a58145fd08 EFLAGS: 00010202
[  102.749358] RAX: ffff901778b77070 RBX: 0000000000000000 RCX: 0000000000000040
[  102.749360] RDX: 0000000000000040 RSI: 00000000deadbeef RDI: ffff901778b77070
[  102.749362] RBP: ffff97a58145fd10 R08: ffff901760b67a70 R09: 0000000000000001
[  102.749364] R10: ffff9017008e2cb8 R11: 0000000000000001 R12: ffff901760b67a70
[  102.749366] R13: ffff901760b78f00 R14: 0000000000000003 R15: 0000000000000001
[  102.749368] FS:  0000000000000000(0000) GS:ffff901876e00000(0000) knlGS:0000000000000000
[  102.749372] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  102.749374] CR2: 00000000deadbeef CR3: 000000017c49a004 CR4: 0000000000770ef0
[  102.749376] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  102.749378] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  102.749379] PKRU: 55555554
[  102.749381] Call Trace:
[  102.749382]  <TASK>
[  102.749383]  ? send_args+0xb2/0xd0
[  102.749389]  send_common+0xb7/0xd0
[  102.749395]  _unlock_lock+0x2c/0x90
[  102.749400]  unlock_lock.isra.56+0x62/0xa0
[  102.749405]  dlm_unlock+0x21e/0x330
[  102.749411]  ? lock_torture_stats+0x80/0x80 [dlm_locktorture]
[  102.749416]  torture_unlock+0x5a/0x90 [dlm_locktorture]
[  102.749419]  ? preempt_count_sub+0xba/0x100
[  102.749427]  lock_torture_writer+0xbd/0x150 [dlm_locktorture]
[  102.786186]  kthread+0x10a/0x130
[  102.786581]  ? kthread_complete_and_exit+0x20/0x20
[  102.787156]  ret_from_fork+0x22/0x30
[  102.787588]  </TASK>
[  102.787855] Modules linked in: dlm_locktorture torture rpcsec_gss_krb5 intel_rapl_msr intel_rapl_common kvm_intel iTCO_wdt iTCO_vendor_support kvm vmw_vsock_virtio_transport qxl irqbypass vmw_vsock_virtio_transport_common drm_ttm_helper crc32_pclmul joydev crc32c_intel ttm vsock virtio_scsi virtio_balloon snd_pcm drm_kms_helper virtio_console snd_timer snd drm soundcore syscopyarea i2c_i801 sysfillrect sysimgblt i2c_smbus pcspkr fb_sys_fops lpc_ich serio_raw
[  102.792536] CR2: 00000000deadbeef
[  102.792930] ---[ end trace 0000000000000000 ]---

This patch fixes the issue by checking also on DLM_LKF_VALBLK on exflags
is set when copying the lvbptr array instead of if it's just null which
fixes for me the issue.

I think this patch can fix other dlm users as well, depending how they
handle the init, freeing memory handling of sb_lvbptr and don't set
DLM_LKF_VALBLK for some dlm_lock() calls. It might a there could be a
hidden issue all the time. However with checking on DLM_LKF_VALBLK the
user always need to provide a sb_lvbptr non-null value. There might be
more intelligent handling between per ls lvblen, DLM_LKF_VALBLK and
non-null to report the user the way how DLM API is used is wrong but can
be added for later, this will only fix the current behaviour.

Cc: stable@vger.kernel.org
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>

If the user generates -EINVAL it's probably because they are
using DLM incorrectly.  Change the log level to make these
errors more visible.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>

Avoid hard-coded function names inside message format strings.
(Prevents checkpatch warnings.)
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>

This patch checks for -EBUSY conditions in dlm_unlock() before
checking for -EINVAL conditions (except for CANCEL and
FORCEUNLOCK calls where a busy condition is expected.)
There are no problems with the current ordering of checks,
but this makes dlm_unlock() consistent with dlm_lock(), and
may avoid future problems if other checks are added.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>

During lock arg validation, first check for -EBUSY cases, then for
-EINVAL cases. The -EINVAL checks look at lkb state variables
which are not stable when an lkb is busy and would cause an
-EBUSY result, e.g. lkb->lkb_grmode.

Cc: stable@vger.kernel.org
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>

This patch fixes a race by using ls_cb_mutex around the bit
operations and conditional code blocks for LSFL_CB_DELAY.

The function dlm_callback_stop() expects to stop all callbacks and
flush all currently queued onces. The set_bit() is not enough because
there can still be queue_work() after the workqueue was flushed.
To avoid queue_work() after set_bit(), surround both by ls_cb_mutex.

Cc: stable@vger.kernel.org
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>

This patch fixes a race between queue_work() in
_dlm_lowcomms_commit_msg() and srcu_read_unlock(). The queue_work() can
take the final reference of a dlm_msg and so msg->idx can contain
garbage which is signaled by the following warning:

[  676.237050] ------------[ cut here ]------------
[  676.237052] WARNING: CPU: 0 PID: 1060 at include/linux/srcu.h:189 dlm_lowcomms_commit_msg+0x41/0x50
[  676.238945] Modules linked in: dlm_locktorture torture rpcsec_gss_krb5 intel_rapl_msr intel_rapl_common iTCO_wdt iTCO_vendor_support qxl kvm_intel drm_ttm_helper vmw_vsock_virtio_transport kvm vmw_vsock_virtio_transport_common ttm irqbypass crc32_pclmul joydev crc32c_intel serio_raw drm_kms_helper vsock virtio_scsi virtio_console virtio_balloon snd_pcm drm syscopyarea sysfillrect sysimgblt snd_timer fb_sys_fops i2c_i801 lpc_ich snd i2c_smbus soundcore pcspkr
[  676.244227] CPU: 0 PID: 1060 Comm: lock_torture_wr Not tainted 5.19.0-rc3+ #1546
[  676.245216] Hardware name: Red Hat KVM/RHEL-AV, BIOS 1.16.0-2.module+el8.7.0+15506+033991b0 04/01/2014
[  676.246460] RIP: 0010:dlm_lowcomms_commit_msg+0x41/0x50
[  676.247132] Code: fe ff ff ff 75 24 48 c7 c6 bd 0f 49 bb 48 c7 c7 38 7c 01 bd e8 00 e7 ca ff 89 de 48 c7 c7 60 78 01 bd e8 42 3d cd ff 5b 5d c3 <0f> 0b eb d8 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48
[  676.249253] RSP: 0018:ffffa401c18ffc68 EFLAGS: 00010282
[  676.249855] RAX: 0000000000000001 RBX: 00000000ffff8b76 RCX: 0000000000000006
[  676.250713] RDX: 0000000000000000 RSI: ffffffffbccf3a10 RDI: ffffffffbcc7b62e
[  676.251610] RBP: ffffa401c18ffc70 R08: 0000000000000001 R09: 0000000000000001
[  676.252481] R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000005
[  676.253421] R13: ffff8b76786ec370 R14: ffff8b76786ec370 R15: ffff8b76786ec480
[  676.254257] FS:  0000000000000000(0000) GS:ffff8b7777800000(0000) knlGS:0000000000000000
[  676.255239] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  676.255897] CR2: 00005590205d88b8 CR3: 000000017656c003 CR4: 0000000000770ee0
[  676.256734] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  676.257567] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  676.258397] PKRU: 55555554
[  676.258729] Call Trace:
[  676.259063]  <TASK>
[  676.259354]  dlm_midcomms_commit_mhandle+0xcc/0x110
[  676.259964]  queue_bast+0x8b/0xb0
[  676.260423]  grant_pending_locks+0x166/0x1b0
[  676.261007]  _unlock_lock+0x75/0x90
[  676.261469]  unlock_lock.isra.57+0x62/0xa0
[  676.262009]  dlm_unlock+0x21e/0x330
[  676.262457]  ? lock_torture_stats+0x80/0x80 [dlm_locktorture]
[  676.263183]  torture_unlock+0x5a/0x90 [dlm_locktorture]
[  676.263815]  ? preempt_count_sub+0xba/0x100
[  676.264361]  ? complete+0x1d/0x60
[  676.264777]  lock_torture_writer+0xb8/0x150 [dlm_locktorture]
[  676.265555]  kthread+0x10a/0x130
[  676.266007]  ? kthread_complete_and_exit+0x20/0x20
[  676.266616]  ret_from_fork+0x22/0x30
[  676.267097]  </TASK>
[  676.267381] irq event stamp: 9579855
[  676.267824] hardirqs last  enabled at (9579863): [<ffffffffbb14e6f8>] __up_console_sem+0x58/0x60
[  676.268896] hardirqs last disabled at (9579872): [<ffffffffbb14e6dd>] __up_console_sem+0x3d/0x60
[  676.270008] softirqs last  enabled at (9579798): [<ffffffffbc200349>] __do_softirq+0x349/0x4c7
[  676.271438] softirqs last disabled at (9579897): [<ffffffffbb0d54c0>] irq_exit_rcu+0xb0/0xf0
[  676.272796] ---[ end trace 0000000000000000 ]---

I reproduced this warning with dlm_locktorture test which is currently
not upstream. However this patch fix the issue by make a additional
refcount between dlm_lowcomms_new_msg() and dlm_lowcomms_commit_msg().
In case of the race the kref_put() in dlm_lowcomms_commit_msg() will be
the final put.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>

Pull irq fixes from Ingo Molnar:
 "Misc irqchip fixes: LoongArch driver fixes and a Hyper-V IOMMU fix"

* tag 'irq-urgent-2022-08-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/loongson-liointc: Fix an error handling path in liointc_init()
  irqchip/loongarch: Fix irq_domain_alloc_fwnode() abuse
  irqchip/loongson-pch-pic: Move find_pch_pic() into CONFIG_ACPI
  irqchip/loongson-eiointc: Fix a build warning
  irqchip/loongson-eiointc: Fix irq affinity setting
  iommu/hyper-v: Use helper instead of directly accessing affinity

Pull x86 kprobes fix from Ingo Molnar:
 "Fix a kprobes bug in JNG/JNLE emulation when a kprobe is installed at
  such instructions, possibly resulting in incorrect execution (the
  wrong branch taken)"

* tag 'perf-urgent-2022-08-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/kprobes: Fix JNG/JNLE emulation

Pull tracing fixes from Steven Rostedt:
 "Various fixes for tracing:

   - Fix a return value of traceprobe_parse_event_name()

   - Fix NULL pointer dereference from failed ftrace enabling

   - Fix NULL pointer dereference when asking for registers from eprobes

   - Make eprobes consistent with kprobes/uprobes, filters and
     histograms"

* tag 'trace-v6.0-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Have filter accept "common_cpu" to be consistent
  tracing/probes: Have kprobes and uprobes use $COMM too
  tracing/eprobes: Have event probes be consistent with kprobes and uprobes
  tracing/eprobes: Fix reading of string fields
  tracing/eprobes: Do not hardcode $comm as a string
  tracing/eprobes: Do not allow eprobes to use $stack, or % for regs
  ftrace: Fix NULL pointer dereference in is_ftrace_trampoline when ftrace is dead
  tracing/perf: Fix double put of trace event when init fails
  tracing: React to error return from traceprobe_parse_event_name()

Make filtering consistent with histograms. As "cpu" can be a field of an
event, allow for "common_cpu" to keep it from being confused with the
"cpu" field of the event.

Link: https://lkml.kernel.org/r/20220820134401.513062765@goodmis.org
Link: https://lore.kernel.org/all/20220820220920.e42fa32b70505b1904f0a0ad@kernel.org/

Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Fixes: 1e3bac71 ("tracing/histogram: Rename "cpu" to "common_cpu"")
Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Both $comm and $COMM can be used to get current->comm in eprobes and the
filtering and histogram logic. Make kprobes and uprobes consistent in this
regard and allow both $comm and $COMM as well. Currently kprobes and
uprobes only handle $comm, which is inconsistent with the other utilities,
and can be confusing to users.

Link: https://lkml.kernel.org/r/20220820134401.317014913@goodmis.org
Link: https://lore.kernel.org/all/20220820220442.776e1ddaf8836e82edb34d01@kernel.org/

Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Fixes: 53305928 ("tracing: probeevent: Introduce new argument fetching code")
Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Currently, if a symbol "@" is attempted to be used with an event probe
(eprobes), it will cause a NULL pointer dereference crash.

Both kprobes and uprobes can reference data other than the main registers.
Such as immediate address, symbols and the current task name. Have eprobes
do the same thing.

For "comm", if "comm" is used and the event being attached to does not
have the "comm" field, then make it the "$comm" that kprobes has. This is
consistent to the way histograms and filters work.

Link: https://lkml.kernel.org/r/20220820134401.136924220@goodmis.org

Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Fixes: 7491e2c4 ("tracing: Add a probe that attaches to trace events")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Currently when an event probe (eprobe) hooks to a string field, it does
not display it as a string, but instead as a number. This makes the field
rather useless. Handle the different kinds of strings, dynamic, static,
relational/dynamic etc.

Now when a string field is used, the ":string" type can be used to display
it:

  echo "e:sw sched/sched_switch comm=$next_comm:string" > dynamic_events

Link: https://lkml.kernel.org/r/20220820134400.959640191@goodmis.org

Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Fixes: 7491e2c4 ("tracing: Add a probe that attaches to trace events")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

The variable $comm is hard coded as a string, which is true for both
kprobes and uprobes, but for event probes (eprobes) it is a field name. In
most cases the "comm" field would be a string, but there's no guarantee of
that fact.

Do not assume that comm is a string. Not to mention, it currently forces
comm fields to fault, as string processing for event probes is currently
broken.

Link: https://lkml.kernel.org/r/20220820134400.756152112@goodmis.org

Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Fixes: 7491e2c4 ("tracing: Add a probe that attaches to trace events")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

While playing with event probes (eprobes), I tried to see what would
happen if I attempted to retrieve the instruction pointer (%rip) knowing
that event probes do not use pt_regs. The result was:

 BUG: kernel NULL pointer dereference, address: 0000000000000024
 #PF: supervisor read access in kernel mode
 #PF: error_code(0x0000) - not-present page
 PGD 0 P4D 0
 Oops: 0000 [#1] PREEMPT SMP PTI
 CPU: 1 PID: 1847 Comm: trace-cmd Not tainted 5.19.0-rc5-test+ #309
 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01
v03.03 07/14/2016
 RIP: 0010:get_event_field.isra.0+0x0/0x50
 Code: ff 48 c7 c7 c0 8f 74 a1 e8 3d 8b f5 ff e8 88 09 f6 ff 4c 89 e7 e8
50 6a 13 00 48 89 ef 5b 5d 41 5c 41 5d e9 42 6a 13 00 66 90 <48> 63 47 24
8b 57 2c 48 01 c6 8b 47 28 83 f8 02 74 0e 83 f8 04 74
 RSP: 0018:ffff916c394bbaf0 EFLAGS: 00010086
 RAX: ffff916c854041d8 RBX: ffff916c8d9fbf50 RCX: ffff916c255d2000
 RDX: 0000000000000000 RSI: ffff916c255d2008 RDI: 0000000000000000
 RBP: 0000000000000000 R08: ffff916c3a2a0c08 R09: ffff916c394bbda8
 R10: 0000000000000000 R11: 0000000000000000 R12: ffff916c854041d8
 R13: ffff916c854041b0 R14: 0000000000000000 R15: 0000000000000000
 FS:  0000000000000000(0000) GS:ffff916c9ea40000(0000)
knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000024 CR3: 000000011b60a002 CR4: 00000000001706e0
 Call Trace:
  <TASK>
  get_eprobe_size+0xb4/0x640
  ? __mod_node_page_state+0x72/0xc0
  __eprobe_trace_func+0x59/0x1a0
  ? __mod_lruvec_page_state+0xaa/0x1b0
  ? page_remove_file_rmap+0x14/0x230
  ? page_remove_rmap+0xda/0x170
  event_triggers_call+0x52/0xe0
  trace_event_buffer_commit+0x18f/0x240
  trace_event_raw_event_sched_wakeup_template+0x7a/0xb0
  try_to_wake_up+0x260/0x4c0
  __wake_up_common+0x80/0x180
  __wake_up_common_lock+0x7c/0xc0
  do_notify_parent+0x1c9/0x2a0
  exit_notify+0x1a9/0x220
  do_exit+0x2ba/0x450
  do_group_exit+0x2d/0x90
  __x64_sys_exit_group+0x14/0x20
  do_syscall_64+0x3b/0x90
  entry_SYSCALL_64_after_hwframe+0x46/0xb0

Obviously this is not the desired result.

Move the testing for TPARG_FL_TPOINT which is only used for event probes
to the top of the "$" variable check, as all the other variables are not
used for event probes. Also add a check in the register parsing "%" to
fail if an event probe is used.

Link: https://lkml.kernel.org/r/20220820134400.564426983@goodmis.org

Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Fixes: 7491e2c4 ("tracing: Add a probe that attaches to trace events")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

ftrace_startup does not remove ops from ftrace_ops_list when
ftrace_startup_enable fails:

register_ftrace_function
  ftrace_startup
    __register_ftrace_function
      ...
      add_ftrace_ops(&ftrace_ops_list, ops)
      ...
    ...
    ftrace_startup_enable // if ftrace failed to modify, ftrace_disabled is set to 1
    ...
  return 0 // ops is in the ftrace_ops_list.

When ftrace_disabled = 1, unregister_ftrace_function simply returns without doing anything:
unregister_ftrace_function
  ftrace_shutdown
    if (unlikely(ftrace_disabled))
            return -ENODEV;  // return here, __unregister_ftrace_function is not executed,
                             // as a result, ops is still in the ftrace_ops_list
    __unregister_ftrace_function
    ...

If ops is dynamically allocated, it will be free later, in this case,
is_ftrace_trampoline accesses NULL pointer:

is_ftrace_trampoline
  ftrace_ops_trampoline
    do_for_each_ftrace_op(op, ftrace_ops_list) // OOPS! op may be NULL!

Syzkaller reports as follows:
[ 1203.506103] BUG: kernel NULL pointer dereference, address: 000000000000010b
[ 1203.508039] #PF: supervisor read access in kernel mode
[ 1203.508798] #PF: error_code(0x0000) - not-present page
[ 1203.509558] PGD 800000011660b067 P4D 800000011660b067 PUD 130fb8067 PMD 0
[ 1203.510560] Oops: 0000 [#1] SMP KASAN PTI
[ 1203.511189] CPU: 6 PID: 29532 Comm: syz-executor.2 Tainted: G    B   W         5.10.0 #8
[ 1203.512324] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[ 1203.513895] RIP: 0010:is_ftrace_trampoline+0x26/0xb0
[ 1203.514644] Code: ff eb d3 90 41 55 41 54 49 89 fc 55 53 e8 f2 00 fd ff 48 8b 1d 3b 35 5d 03 e8 e6 00 fd ff 48 8d bb 90 00 00 00 e8 2a 81 26 00 <48> 8b ab 90 00 00 00 48 85 ed 74 1d e8 c9 00 fd ff 48 8d bb 98 00
[ 1203.518838] RSP: 0018:ffffc900012cf960 EFLAGS: 00010246
[ 1203.520092] RAX: 0000000000000000 RBX: 000000000000007b RCX: ffffffff8a331866
[ 1203.521469] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 000000000000010b
[ 1203.522583] RBP: 0000000000000000 R08: 0000000000000000 R09: ffffffff8df18b07
[ 1203.523550] R10: fffffbfff1be3160 R11: 0000000000000001 R12: 0000000000478399
[ 1203.524596] R13: 0000000000000000 R14: ffff888145088000 R15: 0000000000000008
[ 1203.525634] FS:  00007f429f5f4700(0000) GS:ffff8881daf00000(0000) knlGS:0000000000000000
[ 1203.526801] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1203.527626] CR2: 000000000000010b CR3: 0000000170e1e001 CR4: 00000000003706e0
[ 1203.528611] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1203.529605] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400

Therefore, when ftrace_startup_enable fails, we need to rollback registration
process and remove ops from ftrace_ops_list.

Link: https://lkml.kernel.org/r/20220818032659.56209-1-yangjihong1@huawei.comSuggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

If in perf_trace_event_init(), the perf_trace_event_open() fails, then it
will call perf_trace_event_unreg() which will not only unregister the perf
trace event, but will also call the put() function of the tp_event.

The problem here is that the trace_event_try_get_ref() is called by the
caller of perf_trace_event_init() and if perf_trace_event_init() returns a
failure, it will then call trace_event_put(). But since the
perf_trace_event_unreg() already called the trace_event_put() function, it
triggers a WARN_ON().

 WARNING: CPU: 1 PID: 30309 at kernel/trace/trace_dynevent.c:46 trace_event_dyn_put_ref+0x15/0x20

If perf_trace_event_reg() does not call the trace_event_try_get_ref() then
the perf_trace_event_unreg() should not be calling trace_event_put(). This
breaks symmetry and causes bugs like these.

Pull out the trace_event_put() from perf_trace_event_unreg() and call it
in the locations that perf_trace_event_unreg() is called. This not only
fixes this bug, but also brings back the proper symmetry of the reg/unreg
vs get/put logic.

Link: https://lore.kernel.org/all/cover.1660347763.git.kjlx@templeofstupid.com/
Link: https://lkml.kernel.org/r/20220816192817.43d5e17f@gandalf.local.home

Cc: stable@vger.kernel.org
Fixes: 1d18538e ("tracing: Have dynamic events have a ref counter")
Reported-by: Krister Johansen <kjlx@templeofstupid.com>
Reviewed-by: Krister Johansen <kjlx@templeofstupid.com>
Tested-by: Krister Johansen <kjlx@templeofstupid.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

The function traceprobe_parse_event_name() may set the first two function
arguments to a non-null value and still return -EINVAL to indicate an
unsuccessful completion of the function. Hence, it is not sufficient to
just check the result of the two function arguments for being not null,
but the return value also needs to be checked.

Commit 95c104c3 ("tracing: Auto generate event name when creating a
group of events") changed the error-return-value checking of the second
traceprobe_parse_event_name() invocation in __trace_eprobe_create() and
removed checking the return value to jump to the error handling case.

Reinstate using the return value in the error-return-value checking.

Link: https://lkml.kernel.org/r/20220811071734.20700-1-lukas.bulwahn@gmail.com

Fixes: 95c104c3 ("tracing: Auto generate event name when creating a group of events")
Acked-by: Linyu Yuan <quic_linyyuan@quicinc.com>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Pull i2c fixes from Wolfram Sang:
 "A revert to fix a regression introduced this merge window and a fix
  for proper error handling in the remove path of the iMX driver"

* tag 'i2c-for-6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: imx: Make sure to unregister adapter on remove()
  Revert "i2c: scmi: Replace open coded device_get_match_data()"

Pull cifs client fixes from Steve French:

 - memory leak fix

 - two small cleanups

 - trivial strlcpy removal

 - update missing entry for cifs headers in MAINTAINERS file

* tag '6.0-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: move from strlcpy with unused retval to strscpy
  cifs: Fix memory leak on the deferred close
  cifs: remove useless parameter 'is_fsctl' from SMB2_ioctl()
  cifs: remove unused server parameter from calc_smb_size()
  cifs: missing directory in MAINTAINERS file

GCC has supported asm goto since 4.5, and Clang has since version 9.0.0.
The minimum supported versions of these tools for the build according to
Documentation/process/changes.rst are 5.1 and 11.0.0 respectively.

Remove the feature detection script, Kconfig option, and clean up some
fallback code that is no longer supported.

The removed script was also testing for a GCC specific bug that was
fixed in the 4.7 release.

Also remove workarounds for bpftrace using clang older than 9.0.0, since
other BPF backend fixes are required at this point.

Link: https://lore.kernel.org/lkml/CAK7LNATSr=BXKfkdW8f-H5VT_w=xBpT2ZQcZ7rm6JfkdE+QnmA@mail.gmail.com/
Link: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=48637Acked-by: Borislav Petkov <bp@suse.de>
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If for whatever reasons pm_runtime_resume_and_get() fails and .remove() is
exited early, the i2c adapter stays around and the irq still calls its
handler, while the driver data and the register mapping go away. So if
later the i2c adapter is accessed or the irq triggers this results in
havoc accessing freed memory and unmapped registers.

So unregister the software resources even if resume failed, and only skip
the hardware access in that case.

Fixes: 588eb93e ("i2c: imx: add runtime pm support to improve the performance")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

This reverts commit 9ae551de. We got a
regression report, so ensure this machine boots again. We will come back
with a better version hopefully.
Reported-by: Josef Johansson <josef@oderland.se>
Link: https://lore.kernel.org/r/4d2d5b04-0b6c-1cb1-a63f-dc06dfe1b5da@oderland.seSigned-off-by: Wolfram Sang <wsa@kernel.org>

Merge tag 'kbuild-fixes-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Fix module versioning broken on some architectures

 - Make dummy-tools enable CONFIG_PPC_LONG_DOUBLE_128

 - Remove -Wformat-zero-length, which has no warning instance

 - Fix the order between drivers and libs in modules.order

 - Fix false-positive warnings in clang-analyzer

* tag 'kbuild-fixes-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  scripts/clang-tools: Remove DeprecatedOrUnsafeBufferHandling check
  kbuild: fix the modules order between drivers and libs
  scripts/Makefile.extrawarn: Do not disable clang's -Wformat-zero-length
  kbuild: dummy-tools: pretend we understand __LONG_DOUBLE_128__
  modpost: fix module versioning when a symbol lacks valid CRC

Merge tag 'perf-tools-fixes-for-v6.0-2022-08-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Fix alignment for cpu map masks in event encoding.

 - Support reading PERF_FORMAT_LOST, perf tool counterpart for a feature
   that was added in this merge window.

 - Sync perf tools copies of kernel headers: socket, msr-index, fscrypt,
   cpufeatures, i915_drm, kvm, vhost, perf_event.

* tag 'perf-tools-fixes-for-v6.0-2022-08-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf tools: Support reading PERF_FORMAT_LOST
  libperf: Add a test case for read formats
  libperf: Handle read format in perf_evsel__read()
  tools headers UAPI: Sync linux/perf_event.h with the kernel sources
  tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources
  tools headers UAPI: Sync KVM's vmx.h header with the kernel sources
  tools include UAPI: Sync linux/vhost.h with the kernel sources
  tools headers kvm s390: Sync headers with the kernel sources
  tools headers UAPI: Sync linux/kvm.h with the kernel sources
  tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
  tools headers cpufeatures: Sync with the kernel sources
  tools headers UAPI: Sync linux/fscrypt.h with the kernel sources
  tools arch x86: Sync the msr-index.h copy with the kernel sources
  perf beauty: Update copy of linux/socket.h with the kernel sources
  perf cpumap: Fix alignment for masks in event encoding
  perf cpumap: Compute mask size in constant time
  perf cpumap: Synthetic events and const/static
  perf cpumap: Const map for max()

Pull s390 updates from Alexander Gordeev:

 - Fix a KVM crash on z12 and older machines caused by a wrong
   assumption that Query AP Configuration Information is always
   available.

 - Lower severity of excessive Hypervisor filesystem error messages
   when booting under KVM.

* tag 's390-6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/ap: fix crash on older machines based on QCI info missing
  s390/hypfs: avoid error message under KVM

Pull powerpc fixes from Michael Ellerman:

 - Fix atomic sleep warnings at boot due to get_phb_number() taking a
   mutex with a spinlock held on some machines.

 - Add missing PMU selftests to .gitignores.

Thanks to Guenter Roeck and Russell Currey.

* tag 'powerpc-6.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  selftests/powerpc: Add missing PMU selftests to .gitignores
  powerpc/pci: Fix get_phb_number() locking

Pull rdma fixes from Jason Gunthorpe:
 "A few minor fixes:

   - Fix buffer management in SRP to correct a regression with the login
     authentication feature from v5.17

   - Don't iterate over non-present ports in mlx5

   - Fix an error introduced by the foritify work in cxgb4

   - Two bug fixes for the recently merged ERDMA driver

   - Unbreak RDMA dmabuf support, a regresion from v5.19"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA: Handle the return code from dma_resv_wait_timeout() properly
  RDMA/erdma: Correct the max_qp and max_cq capacities of the device
  RDMA/erdma: Using the key in FMR WR instead of MR structure
  RDMA/cxgb4: fix accept failure due to increased cpl_t5_pass_accept_rpl size
  RDMA/mlx5: Use the proper number of ports
  IB/iser: Fix login with authentication

This `clang-analyzer` check flags the use of memset(), suggesting a more
secure version of the API, such as memset_s(), which does not exist in
the kernel:

  warning: Call to function 'memset' is insecure as it does not provide
  security checks introduced in the C11 standard. Replace with analogous
  functions that support length arguments or provides boundary checks such
  as 'memset_s' in case of C11
  [clang-analyzer-security.insecureAPI.DeprecatedOrUnsafeBufferHandling]
Signed-off-by: Guru Das Srinagesh <quic_gurus@quicinc.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Commit b2c88554 ("kbuild: update modules.order only when contained
modules are updated") accidentally changed the modules order.

Prior to that commit, the modules order was determined based on
vmlinux-dirs, which lists core-y/m, drivers-y/m, libs-y/m, in this order.

Now, subdir-modorder lists them in a different order: core-y/m, libs-y/m,
drivers-y/m.

Presumably, there was no practical issue because the modules in drivers
and libs are orthogonal, but there is no reason to have this distortion.

Get back to the original order.

Fixes: b2c88554 ("kbuild: update modules.order only when contained modules are updated")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

There are no instances of this warning in the tree across several
difference architectures and configurations. This was added by
commit 26ea6bb1 ("kbuild, LLVMLinux: Supress warnings unless W=1-3")
back in 2014, where it might have been necessary, but there are no
instances of it now so stop disabling it to increase warning coverage
for clang.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

There is a test in powerpc's Kconfig which checks __LONG_DOUBLE_128__
and sets CONFIG_PPC_LONG_DOUBLE_128 if it is understood by the compiler.

We currently don't handle it, so this results in PPC_LONG_DOUBLE_128 not
being in super-config generated by dummy-tools. So take this into
account in the gcc script and preprocess __LONG_DOUBLE_128__ as "1".
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Since commit 7b453719 ("kbuild: link symbol CRCs at final link,
removing CONFIG_MODULE_REL_CRCS"), module versioning is broken on
some architectures. Loading a module fails with "disagrees about
version of symbol module_layout".

On such architectures (e.g. ARCH=sparc build with sparc64_defconfig),
modpost shows a warning, like follows:

  WARNING: modpost: EXPORT symbol "_mcount" [vmlinux] version generation failed, symbol will not be versioned.
  Is "_mcount" prototyped in <asm/asm-prototypes.h>?

Previously, it was a harmless warning (CRC check was just skipped),
but now wrong CRCs are used for comparison because invalid CRCs are
just skipped.

  $ sparc64-linux-gnu-nm -n vmlinux
    [snip]
  0000000000c2cea0 r __ksymtab__kstrtol
  0000000000c2ceb8 r __ksymtab__kstrtoul
  0000000000c2ced0 r __ksymtab__local_bh_enable
  0000000000c2cee8 r __ksymtab__mcount
  0000000000c2cf00 r __ksymtab__printk
  0000000000c2cf18 r __ksymtab__raw_read_lock
  0000000000c2cf30 r __ksymtab__raw_read_lock_bh
    [snip]
  0000000000c53b34 D __crc__kstrtol
  0000000000c53b38 D __crc__kstrtoul
  0000000000c53b3c D __crc__local_bh_enable
  0000000000c53b40 D __crc__printk
  0000000000c53b44 D __crc__raw_read_lock
  0000000000c53b48 D __crc__raw_read_lock_bh

Please notice __crc__mcount is missing here.

When the module subsystem looks up a CRC that comes after, it results
in reading out a wrong address. For example, when __crc__printk is
needed, the module subsystem reads 0xc53b44 instead of 0xc53b40.

All CRC entries must be output for correct index accessing. Invalid
CRCs will be unused, but are needed to keep the one-to-one mapping
between __ksymtab_* and __crc_*.

The best is to fix all modpost warnings, but several warnings are still
remaining on less popular architectures.

Fixes: 7b453719 ("kbuild: link symbol CRCs at final link, removing CONFIG_MODULE_REL_CRCS")
Reported-by: matoro <matoro_mailinglist_kernel@matoro.tk>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: matoro <matoro_mailinglist_kernel@matoro.tk>

Pull block fixes from Jens Axboe:
 "A few fixes that should go into this release:

   - Small series of patches for ublk (ZiyangZhang)

   - Remove dead function (Yu)

   - Fix for running a block queue in case of resource starvation
     (Yufen)"

* tag 'block-6.0-2022-08-19' of git://git.kernel.dk/linux-block:
  blk-mq: run queue no matter whether the request is the last request
  blk-mq: remove unused function blk_mq_queue_stopped()
  ublk_drv: do not add a re-issued request aborted previously to ioucmd's task_work
  ublk_drv: update comment for __ublk_fail_req()
  ublk_drv: check ubq_daemon_is_dying() in __ublk_rq_task_work()
  ublk_drv: update iod->addr for UBLK_IO_NEED_GET_DATA

Pull io_uring fixes from Jens Axboe:
 "A few fixes for regressions in this cycle:

   - Two instances of using the wrong "has async data" helper (Pavel)

   - Fixup zero-copy address import (Pavel)

   - Bump zero-copy notification slot limit (Pavel)"

* tag 'io_uring-6.0-2022-08-19' of git://git.kernel.dk/linux-block:
  io_uring/net: use right helpers for async_data
  io_uring/notif: raise limit on notification slots
  io_uring/net: improve zc addr import error handling
  io_uring/net: use right helpers for async recycle

Pull ATA fixes from Damien Le Moal:

 - Add a missing command name definition for ata_get_cmd_name(), from
   me.

 - A fix to address a performance regression due to the default
   max_sectors queue limit for ATA devices connected to AHCI adapters
   being too small, from John.

* tag 'ata-6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  ata: libata: Set __ATA_BASE_SHT max_sectors
  ata: libata-eh: Add missing command name

Pull MMC host fixes from Ulf Hansson:

 - meson-gx: Fix error handling in ->probe()

 - mtk-sd: Fix a command problem when using cqe off/disable

 - pxamci: Fix error handling in ->probe()

 - sdhci-of-dwcmshc: Fix broken support for the BlueField-3 variant

* tag 'mmc-v6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: sdhci-of-dwcmshc: Re-enable support for the BlueField-3 SoC
  mmc: meson-gx: Fix an error handling path in meson_mmc_probe()
  mmc: mtk-sd: Clear interrupts when cqe off/disable
  mmc: pxamci: Fix another error handling path in pxamci_probe()
  mmc: pxamci: Fix an error handling path in pxamci_probe()

Commit 0568e612 ("ata: libata-scsi: cap ata_device->max_sectors
according to shost->max_sectors") inadvertently capped the max_sectors
value for some SATA disks to a value which is lower than we would want.

For a device which supports LBA48, we would previously have request queue
max_sectors_kb and max_hw_sectors_kb values of 1280 and 32767 respectively.

For AHCI controllers, the value chosen for shost max sectors comes from
the minimum of the SCSI host default max sectors in
SCSI_DEFAULT_MAX_SECTORS (1024) and the shost DMA device mapping limit.

This means that we would now set the max_sectors_kb and max_hw_sectors_kb
values for a disk which supports LBA48 at 512, ignoring DMA mapping limit.

As report by Oliver at [0], this caused a performance regression.

Fix by picking a large enough max sectors value for ATA host controllers
such that we don't needlessly reduce max_sectors_kb for LBA48 disks.

[0] https://lore.kernel.org/linux-ide/YvsGbidf3na5FpGb@xsang-OptiPlex-9020/T/#m22d9fc5ad15af66066dd9fecf3d50f1b1ef11da3

Fixes: 0568e612 ("ata: libata-scsi: cap ata_device->max_sectors according to shost->max_sectors")
Reported-by: Oliver Sang <oliver.sang@intel.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>