- 23 Dec, 2011 5 commits
-
-
Krishna Gudipati authored
Change details: - The patch adds flash sub-module to the bna driver. - Added ethtool set_eeprom() and get_eeprom() entry points to support flash partition read/write operations. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Giuseppe Cavallaro authored
This patch fixes the following warning raised when compile: WARNING: modpost: missing MODULE_LICENSE() in drivers/net/ethernet/stmicro/stmmac/stmmac.o Reported-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
stephen hemminger authored
This patch changes it to yield sooner at halfway instead. Still not a cure-all for listener overrun if listner is slow, but works much reliably. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
stephen hemminger authored
Don't inline functions that cover several lines, and do inline the trivial ones. Also make some arguments const. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Glauber Costa authored
This reverts commit e5671dfa. After a follow up discussion with Michal, it was agreed it would be better to leave the kmem controller with just the tcp files, deferring the behavior of the other general memory.kmem.* files for a later time, when more caches are controlled. This is because generic kmem files are not used by tcp accounting and it is not clear how other slab caches would fit into the scheme. We are reverting the original commit so we can track the reference. Part of the patch is kept, because it was used by the later tcp code. Conflicts are shown in the bottom. init/Kconfig is removed from the revert entirely. Signed-off-by: Glauber Costa <glommer@parallels.com> Acked-by: Michal Hocko <mhocko@suse.cz> CC: Kirill A. Shutemov <kirill@shutemov.name> CC: Paul Menage <paul@paulmenage.org> CC: Greg Thelen <gthelen@google.com> CC: Johannes Weiner <jweiner@redhat.com> CC: David S. Miller <davem@davemloft.net> Conflicts: Documentation/cgroups/memory.txt mm/memcontrol.c Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 21 Dec, 2011 6 commits
-
-
Xi Wang authored
Also use mod_timer() instead of direct assignment to "expires". Signed-off-by: Xi Wang <xi.wang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Giuseppe CAVALLARO authored
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Giuseppe CAVALLARO authored
This patch adds the PCI support (as EXPERIMENTAL) this has been also tested on XLINX XC2V3000 FF1152AMT0221 D1215994A VIRTEX FPGA board. To support the PCI bus the main part has been reworked and both the platform and the PCI specific parts have been moved into different files. Signed-off-by: Rayagond Kokatanur <rayagond@vayavyalabs.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
A known Out Of Order (OOO) problem hurts SFQ when timer changes perturbation value, since all new packets delivered to SFQ enqueue might end on different slots than previous in-flight packets. With round robin delivery, we can thus deliver packets in a different order. Since SFQ is limited to small amount of in-flight packets, we can rehash packets so that this OOO problem is fixed. This rehashing is performed only if internal flow classifier is in use. We now store in skb->cb[] the "struct flow_keys" so that we dont call skb_flow_dissect() again while rehashing. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michal Simek authored
Fix ll_temac and emaclite drivers. Only Microblaze and Xilinx PPC use then and both use NO_IRQ as 0. It will be removed in near future. Signed-off-by: Michal Simek <monstr@monstr.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vijay Subramanian authored
to record the state of SACK/FACK and DSACK for better readability and maintenance. Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 20 Dec, 2011 16 commits
-
-
Shan Wei authored
Fix some trivial typos. Signed-off-by: Shan Wei <shanwei88@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Einar Lueck authored
If recovery is triggered in presence of pending asynchronous deliveries of storage blocks we do a forced cleanup after the corresponding tasklets are completely stopped and trigger appropriate notifications for the correspondingerror state. Signed-off-by: Einar Lueck <elelueck@de.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Frank Blaschka authored
In case there are no system resources to run a recovery we have to clear recovery bitmasks so a further automatic or manual driven recovery can fix up the device. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ursula Braun authored
The NETIUCV device driver allows to connect a Linux guest on z/VM to another z/VM guest based on the z/VM communication facility IUCV. Multiple output paths to different guests are possible, as well as multiple input paths from different guests. With this feature, you can configure multiple point-to-point NETIUCV interfaces between your Linux on System z instance and another z/VM guest. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ursula Braun authored
A recovery does not make sense during shutdown and may even cause an error like this: qeth 0.0.f503: A recovery process has been started for the device Badness at drivers/s390/cio/qdio_main.c:1156 Modules linked in: autofs4 sunrpc dm_multipath scsi_dh scsi_mod qeth_l3 ipv6 vmu r qeth qdio ccwgroup ext3 jbd mbcache dasd_eckd_mod dasd_mod dm_mirror dm_region _hash dm_log dm_mod [last unloaded: scsi_wait_scan] CPU: 3 Not tainted 2.6.32-202.el6.s390x #1 Process qeth_recover (pid: 1498, task: 000000003efe2040, ksp: 000000003d5e3b80) Krnl PSW : 0404200180000000 000003c000be6da8 (qdio_int_handler+0x88/0x43c [qdio] ) R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:0 CC:2 PM:0 EA:3 Krnl GPRS: ffffffffffff3bac 0000000000000005 0000000000000000 fffffffffffffff4 0000000000000000 000000000000000c 0000000000000000 000000003ca97000 0000000000000380 fffffffffffffff4 000000003f22d800 000000003f22c478 000003c000bdf000 000003c000bea270 000000003f447e10 000000003f447db0 Krnl Code: 000003c000be6d9a: c21f00000004 clfi %r1,4 000003c000be6da0: a7c40021 brc 12,3c000be6de2 000003c000be6da4: a7f40001 brc 15,3c000be6da6 >000003c000be6da8: e320a0080004 lg %r2,8(%r10) 000003c000be6dae: a7390003 lghi %r3,3 000003c000be6db2: a72b0178 aghi %r2,376 000003c000be6db6: a7490001 lghi %r4,1 000003c000be6dba: a7590000 lghi %r5,0 Call Trace: ([<000000000080ee80>] __per_cpu_offset+0x0/0x200) [<00000000003d90e8>] ccw_device_call_handler+0x70/0xcc [<00000000003d83a2>] ccw_device_irq+0x82/0x180 [<00000000003cc6a8>] do_IRQ+0x16c/0x1ec [<0000000000118abe>] io_return+0x0/0x8 [<000003c000d04c74>] qeth_determine_capabilities+0x208/0x5cc [qeth] ([<000003c000d04c4a>] qeth_determine_capabilities+0x1de/0x5cc [qeth]) [<000003c000d0a6e0>] qeth_core_hardsetup_card+0x160/0x1258 [qeth] [<000003c000f49f56>] __qeth_l3_set_online+0x132/0xb14 [qeth_l3] [<000003c000f4ac70>] qeth_l3_recover+0x168/0x224 [qeth_l3] [<000000000016e210>] kthread+0xa4/0xac [<0000000000109c6e>] kernel_thread_starter+0x6/0xc [<0000000000109c68>] kernel_thread_starter+0x0/0xc The patch forbids start of a recovery once qeth shutdown is running. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ursula Braun authored
qeth layer3 recovery invokes its set_multicast_list function, which invokes function __vlan_find_dev_deep requiring rcu_read_lock or rtnl lock. This causes kernel messages: kernel: [ INFO: suspicious rcu_dereference_check() usage. ] kernel: --------------------------------------------------- kernel: net/8021q/vlan_core.c:70 invoked rcu_dereference_check() without protection! kernel: stack backtrace: kernel: CPU: 0 Not tainted 3.1.0 #9 kernel: Process qeth_recover (pid: 2078, task: 000000007e584680, ksp: 000000007e3e3930) kernel: 000000007e3e3d08 000000007e3e3c88 0000000000000002 0000000000000000 kernel: 000000007e3e3d28 000000007e3e3ca0 000000007e3e3ca0 00000000005e77ce kernel: 0000000000000000 0000000000000001 ffffffffffffffff 0000000000000001 kernel: 000000000000000d 000000000000000c 000000007e3e3cf0 0000000000000000 kernel: 0000000000000000 0000000000100a18 000000007e3e3c88 000000007e3e3cc8 kernel: Call Trace: kernel: ([<0000000000100926>] show_trace+0xee/0x144) kernel: [<00000000005d395c>] __vlan_find_dev_deep+0xb0/0x108 kernel: [<00000000004acd3a>] qeth_l3_set_multicast_list+0x976/0xe38 kernel: [<00000000004ae0f4>] __qeth_l3_set_online+0x75c/0x1498 kernel: [<00000000004aefec>] qeth_l3_recover+0xc4/0x1d0 kernel: [<0000000000185372>] kthread+0xa6/0xb0 kernel: [<00000000005ed4c6>] kernel_thread_starter+0x6/0xc kernel: [<00000000005ed4c0>] kernel_thread_starter+0x0/0xc The patch makes sure the rtnl lock is held once qeth recovery invokes its set_multicast_list function. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ursula Braun authored
af_iucv differs unnecessarily between state IUCV_SEVERED and IUCV_DISCONN. This patch removes state IUCV_SEVERED. While simplifying af_iucv, this patch removes the 2nd invocation of cpcmd as well. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ursula Braun authored
af_iucv contains timer infrastructure which is not exploited. This patch removes the timer related code parts. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ursula Braun authored
For HiperSockets transport skbs sent are bound to one of the available HiperSockets devices. Add missing release of reference to a HiperSockets device before freeing an skb. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ursula Braun authored
Closing an af_iucv socket may wait for confirmation of outstanding send requests. This patch adds confirmation code for the new HiperSockets transport. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ursula Braun authored
The AF_IUCV address family offers support for ancillary data. This patch enables usage of ancillary data with the new HiperSockets transport. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Krishna Kumar authored
It was reported that the macvtap device selects a Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yevgeny Petrilin authored
When UDP RSS is enabled, we use same QPN for TCP and UDP ranges The bug is that the default_qpn was used base UDP qpn before it was set. Fixes bug introduced in commit: 1202d460Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Cyrill Gorcunov authored
Otherwise getting | net/unix/diag.c:312:16: error: expected declaration specifiers or ‘...’ before string constant | net/unix/diag.c:313:1: error: expected declaration specifiers or ‘...’ before string constant Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Rusty Russell authored
module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. (Thanks to Joe Perches for suggesting coccinelle for 0/1 -> true/false). Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Rusty Russell authored
DaveM said: Please, this kind of stuff rots forever and not using bool properly drives me crazy. Joe Perches <joe@perches.com> gave me the spatch script: @@ bool b; @@ -b = 0 +b = false @@ bool b; @@ -b = 1 +b = true I merely installed coccinelle, read the documentation and took credit. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 19 Dec, 2011 13 commits
-
-
Frederic LAMBERT authored
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Frederic Lambert <frdrc66@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Bjorn Helgaas authored
Replace open-coded list traversal with list_for_each_entry(). CC: Grant Grundler <grundler@parisc-linux.org> CC: netdev@vger.kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Bjorn Helgaas authored
Replace open-coded list traversal with list_for_each_entry(). CC: David S. Miller <davem@davemloft.net> CC: netdev@vger.kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jitendra Kalsaria authored
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
We can use vzalloc() helper now instead of __vmalloc() trick Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Matt Carlson authored
This patch adds the ethtool callbacks necessary to change the rss indirection table from userspace. Should the number of interrupts change (e.g. across a close / open call, or through a reset) and any one of the indirection table values fall out-of-range, the driver will reset the indirection table to a default layout. [Integrated many suggestions made by Ben Hutchings.] Changes since v3 * Removed TG3_FLAG_SUPPORT_MSIX checks at the start of tg3_get_rxfh_indir() and tg3_set_rxfh_indir(). Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
bnx2-mips-06-6.2.3 and bnx2-mips-09-6.2.1.b New firmware fixes iSCSI problems with some LeftHand targets that don't set TTT=0xffffffff for Data-In according to spec. Firmware generates exception warnings for this condition and becomes very slow. This is fixed by suppressing these warnings when using default error mask. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Padmanabh Ratnakar authored
Lancer does not have HW registers to indicate the EQ causing the INTx interrupt. As a result EQE entries of one EQ may be consumed when interrupt is caused by another EQ. Fix this by arming CQs at the end of NAPI poll routine to regenerate the EQEs. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vinson Lee authored
Signed-off-by: Vinson Lee <vlee@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
This reverts commit 5c3ddec7. S390 qeth driver actually still uses the setup ops. Reported-by: Frank Blaschka <blaschka@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yevgeny Petrilin authored
The communication channel is HW interface from PF point of view So the command return status should be stored as HW error code and only then translated to errno values. Reporetd-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yevgeny Petrilin authored
The function is always called from irq context, changing the call to spin_lock(). Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alexander Guller authored
Solves an issue where we tried to free the same page twice after the port has been opened and closed. Signed-off-by: Alexander Guller <alexg@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-