- 26 Jul, 2018 13 commits
-
-
Jeykumar Sankaran authored
dpu uses these elsewhere in the driver (in addition to increasing MAX_PLANES, that'll come later), so pull them out into #define. Changes in v3: - None Signed-off-by:
Jeykumar Sankaran <jsanka@codeaurora.org> [seanpaul pulled this out of the dpu megapatch] Signed-off-by:
Sean Paul <seanpaul@chromium.org> Signed-off-by:
Rob Clark <robdclark@gmail.com>
-
Jeykumar Sankaran authored
This simplifies cleanup, to make sure nothing drops out in case of error. Changes in v3: - None Signed-off-by:
-
Jeykumar Sankaran authored
Useful for incoming DPU support Changes in v3: - None Signed-off-by:
-
Sean Paul authored
I missed this during the atomic conversion Changes in v3: - None Signed-off-by:
-
Abhinav Kumar authored
Make the pclk_rate u64 to accommodate higher pixel clock rates. Changes in v3: - Converted pclk_rate to u32 (Archit) - Rebase on dsi cleanup set in msm-next Cc: Sibi Sankar <sibis@codeaurora.org> Cc: Archit Taneja <architt@codeaurora.org> Signed-off-by:
Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by:
-
Jeykumar Sankaran authored
Enable drm core zpos normalization for planes. Changes in v3: - None Signed-off-by:
-
Rajesh Yadav authored
SoCs having mdp5 or dpu have identical tree like device hierarchy where MDSS top level wrapper manages common power resources for all child devices. Subclass msm_mdss so that msm_mdss includes common defines and mdp5/dpu mdss derivations to include any extensions. Add mdss helper interface (msm_mdss_funcs) to msm_mdss base for mdp5/dpu mdss specific implementation calls. This change subclasses msm_mdss for mdp5, dpu specific changes will be done separately. Changes in v3: - Added Archit's R-b Reviewed-by:
Archit Taneja <architt@codeaurora.org> Reviewed-by:
Rajesh Yadav <ryadav@codeaurora.org> [seanpaul rebased on msm-next and resolved conflicts] Signed-off-by:
-
Sean Paul authored
DPU doesn't use this, so push it into the mdp drivers. Changes in v3: - None Signed-off-by:
-
Abhinav Kumar authored
Currently, DRM bridge for DPU relies on the default video mode setting to set the encoder mode. Add an explicit call to set the encoder mode for bridges. Changes in v3: - None Reviewed-by:
Archit Taneja <architt@codeauorora.org> Signed-off-by:
-
Rajesh Yadav authored
postdiv_lock spinlock was used before initialization for 10nm pll. It causes following spin_bug: "BUG: spinlock bad magic on CPU#0". Initialize spinlock before its usage. Changes in v3: - Added Archit's R-b Reviewed-by:
-
Chandan Uddaraju authored
Current DSI driver uses two connectors for dual DSI case even though we only have one panel. Fix this by implementing one connector/bridge for dual DSI use case. Use master DSI controllers to register one connector/bridge. Changes in v3: - None Reviewed-by:
Chandan Uddaraju <chandanu@codeaurora.org> [seanpaul removed unused local var causing a build warning] Signed-off-by:
-
Chandan Uddaraju authored
For dual dsi mode, the horizontal timing needs to be divided by half since both the dsi controllers will be driving this panel. Adjust the pixel clock and DSI timing accordingly. Changes in v3: - Added Archit's R-b - Rebase on dsi cleanup set in msm-next Cc: Sibi Sankar <sibis@codeaurora.org> Reviewed-by:
-
Jeykumar Sankaran authored
Qualcomm Snapdragon chipsets uses compressed format to optimize BW across multiple IP's. This change adds needed modifier support in drm for a simple 4x4 tile based compressed variants of base formats. Changes in v3: - Removed duplicate entry for DRM_FORMAT_MOD_QCOM_COMPRESSED (Rob Clark) Changes in v4: - Remove all modifiers aside from COMPRESSED, this includes tiled and 10-bit Signed-off-by:
-
- 25 Jul, 2018 9 commits
-
-
vkorjani authored
After enabling DSC we need to send compression mode command packet and pps data packet, for which 2 new data types are added 07h Compression Mode Data Type Write , short write, 2 parameters 0Ah PPS Long Write (word count determines number of bytes) This patch adds support to send these packets. Cc: David Airlie <airlied@linux.ie> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-kernel@vger.kernel.org Cc: linux-fbdev@vger.kernel.org Changes in v3: - None Signed-off-by:
vkorjani <vikas.korjani@intel.com> [seanpaul removed pps_write_buffer fn, added types to packet_format helpers] Signed-off-by:
-
Carsten Behling authored
modesetting X11 driver may provide negative x/y cordinates in mdp5_crtc_cursor_move call when rotation is enabled. Cursor buffer can overlap down to its negative width/height. ROI has to be recalculated for negative x/y indicating using the lower/right corner of the cursor buffer and hotspot must be set in MDP5_LM_CURSOR_XY_SRC_Y MDP5_LM_CURSOR_XY_SRC_X. Signed-off-by:
Carsten Behling <carsten.behling@gmail.com> Signed-off-by:
-
Sibi Sankar authored
Replace version checks with the helper functions bound to cfg_handler for DSI v2, DSI 6G 1.x and DSI 6G v2.0+ controllers Signed-off-by:
Sibi Sankar <sibis@codeaurora.org> Signed-off-by:
-
Sibi Sankar authored
Add dsi host helper function implementation for DSI v2 DSI 6G 1.x and DSI 6G v2.0+ controllers Signed-off-by:
-
Sibi Sankar authored
Add dsi host helper functions support for DSI v2 and DSI 6G 1.x controllers that are under version checks Signed-off-by:
-
Rob Clark authored
f9cb8d8d fixed various race conditions with CTL flush, in particular flushing and sending the START signal before encoder state was updated. But it did this a little too well in some cases that don't trigger encoder->enable(), and CTL[n].FLUSH would never be set. When page flips happen it would paper over the bug, since the first plag flip would flush out the state to the hardware. The issue could be reproduced with, for example, modetest (without the '-v' argument). Fixes: f9cb8d8d drm/msm/mdp5: rework CTL START signal handling Signed-off-by:
-
Jordan Crouse authored
Experimentation shows that resuming power quickly after suspending ends up forcing a system hang for unknown reasons on 5xx targets. To avoid cycling the power too much (especially during init) turn up the autosuspend time for a5xx to 250ms and use pm_runtime_put_autosuspend() when applicable. Signed-off-by:
Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by:
-
Daniel Mack authored
When a msm8016 based system is woken up from suspend, the firmware in the adreno device hangs. [ 83.903416] qcom-iommu-ctx 1f09000.iommu-ctx: Unhandled context fault: fsr=0x202, iova=0x0000000000000000, fsynr=0x2, cb=1 [ 85.853633] msm 1a00000.mdss: A306: hangcheck detected gpu lockup rb 0! [ 85.853661] msm 1a00000.mdss: A306: completed fence: 370 [ 85.859073] msm 1a00000.mdss: A306: submitted fence: 372 [ 85.865113] msm 1a00000.mdss: A306: hangcheck recover! Fix this by adding pm_runtime_force_suspend/pm_runtime_force_resume as sleep ops. Signed-off-by:
Daniel Mack <daniel@zonque.org> Signed-off-by:
-
Daniel Mack authored
To make suspend and resume work on msm8916 platforms, call into the generic helpers and preserve the state across suspends. Signed-off-by:
-
- 20 Jul, 2018 4 commits
-
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
More features for 4.19: - Map processes to vmids for debugging GPUVM faults - Raven gfxoff fixes - Initial gfxoff support for vega12 - Use defines for interrupt sources rather than magic numbers - DC aux fixes - Finish DC logging TODO - Add more DC debugfs interfaces for conformance testing - Add CRC support for DCN - Scheduler rework in preparation for load balancing - Unify common smu9 code - Clean up UVD instancing support - ttm cleanups - Misc fixes and cleanups Signed-off-by:
Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180719194001.3488-1-alexander.deucher@amd.com
-
git://anongit.freedesktop.org/drm/drm-intelDave Airlie authored
On GEM side: - GuC related fixes (Chris, Michal) - GTT read-only pages support (Jon, Chris) - More selftests fixes (Chris) - More GPU reset improvements (Chris) - Flush caches after GGTT writes (Chris) - Handle recursive shrinker for vma->last_active allocation (Chris) - Other execlists fixes (Chris) On Display side: - GLK HDMI fix (Clint) - Rework and cleanup around HPD pin (Ville) - Preparation work for Display Stream Compression support coming on ICL (Anusha) - Nuke LVDS lid notification (Ville) - Assume eDP is always connected (Ville) - Kill intel panel detection (Ville) Signed-off-by:
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-next for 4.19: Core Changes: - add support for DisplayPort CEC-Tunneling-over-AUX (Hans Verkuil) - more doc updates (Daniel Vetter) - fourcc: Add is_yuv field to drm_format_info (Ayan Kumar Halder) - dma-buf: correctly place BUG_ON (Michel Dänzer) Driver Changes: - more vkms support(Rodrigo Siqueira) - many fixes and small improments to all drivers Signed-off-by:
-
git://github.com/skeggsb/linuxDave Airlie authored
misc fixes and cleanups for next. Signed-off-by:
-
- 19 Jul, 2018 14 commits
-
-
Christian König authored
The whole handle, filp and entity handling is superfluous here. We should have reviewed that more thoughtfully. It looks like somebody just made the code instance aware without knowing the background. v2: fix one more missed case in amdgpu_uvd_suspend Reviewed-by:
Leo Liu <leo.liu@amd.com> Signed-off-by:
Christian König <christian.koenig@amd.com> Acked-by:
Chunming Zhou <david1.zhou@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Christian König authored
Not sure what that was every used for, but now it is completely unused. Reviewed-by:
-
Michel Dänzer authored
Allowing CONFIG_DRM_AMD_DC_DCN1_0 to be disabled on X86 was an opportunity for display with Raven Ridge accidentally not working. Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
-
Evan Quan authored
The 'result' is not initialized correctly. It causes the API return an error code even on success. Signed-off-by:
Evan Quan <evan.quan@amd.com> Acked-by:
Huang Rui <ray.huang@amd.com> Signed-off-by:
-
Alex Deucher authored
Use the newly added irq source defines rather than magic numbers for smu7 thermal interrupts. Rewiewed-by:
Rex Zhu <rezhu@amd.com> Signed-off-by:
-
Rodrigo Vivi authored
Signed-off-by:Rodrigo Vivi <rodrigo.vivi@intel.com>
-
Ville Syrjälä authored
With neither LVDS or eDP no longer using intel_panel_detect() we can kill it, and the accompanying modparam. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180717174216.22252-3-ville.syrjala@linux.intel.comReviewed-by:
-
Ville Syrjälä authored
We never registered any kind of lid notifier for eDP, so looking at the lid status is pretty much bonkers. Let's just consider eDP always connected instead. Signed-off-by:
-
Ville Syrjälä authored
We broke the LVDS notifier resume thing in (presumably) commit e2c8b870 ("drm/i915: Use atomic helpers for suspend, v2.") as we no longer duplicate the current state in the LVDS notifier and thus we never resume it properly either. Instead of trying to fix it again let's just kill off the lid notifier entirely. None of the machines tested thus far have apparently needed it. Originally the lid notifier was added to work around cases where the VBIOS was clobbering some of the hardware state behind the driver's back, mostly on Thinkpads. We now have a few report of Thinkpads working just fine without the notifier. So maybe it was misdiagnosed originally, or something else has changed (ACPI video stuff perhaps?). If we do end up finding a machine where the VBIOS is still causing problems I would suggest that we first try setting various bits in the VBIOS scratch registers. There are several to choose from that may instruct the VBIOS to steer clear. With the notifier gone we'll also stop looking at the panel status in ->detect(). v2: Nuke enum modeset_restore (Rodrigo) Cc: stable@vger.kernel.org Cc: Wolfgang Draxinger <wdraxinger.maillist@draxit.de> Cc: Vito Caputo <vcaputo@pengaru.com> Cc: kitsunyan <kitsunyan@airmail.cc> Cc: Joonas Saarinen <jza@saunalahti.fi> Tested-by: Vito Caputo <vcaputo@pengaru.com> # Thinkapd X61s Tested-by: kitsunyan <kitsunyan@airmail.cc> # ThinkPad X200 Tested-by: Joonas Saarinen <jza@saunalahti.fi> # Fujitsu Siemens U9210 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105902 References: https://lists.freedesktop.org/archives/intel-gfx/2018-June/169315.html References: https://bugs.freedesktop.org/show_bug.cgi?id=21230 Fixes: e2c8b870 ("drm/i915: Use atomic helpers for suspend, v2.") Signed-off-by:
-
Chris Wilson authored
There's a race between idling the engine and finishing off the last tasklet (as we may kick the tasklets after declaring an individual engine idle). However, since we do not need to access the device until we try to submit to the ELSP register (processing the CSB just requires normal CPU access to the HWSP, and when idle we should not need to submit!) we can defer the assertion unto that point. The assertion is still useful as it does verify that we do hold the longterm GT wakeref taken from request allocation until request completion. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107274 Fixes: 9512f985 ("drm/i915/execlists: Direct submission of new requests (avoid tasklet/ksoftirqd)") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180719075029.28643-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
If we call into the shrinker for direct relcaim inside kmalloc, it will retire the requests. If we retire the vma->last_active while processing a new i915_vma_move_to_active() we can upset the delicate bookkeeping required for the cache. After the possible invocation of the shrinker, we need to double check the vma->last_active is still valid. Fixes: 8b293eb5 ("drm/i915: Track the last-active inside the i915_vma") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105600#c39Signed-off-by:
-
Chris Wilson authored
We make a decision at module load whether to use the GuC backend or not, but lose that setup across set-wedge. Currently, the guc doesn't override the engine->set_default_submission hook letting execlists sneak back in temporarily on unwedging leading to an unbalanced park/unpark. v2: Remove comment about switching back temporarily to execlists on guc_submission_disable(). We currently only call disable on shutdown, and plan to also call disable before suspend and reset, in which case we will either restore guc submission or mark the driver as wedged, making the reset back to execlists pointless. v3: Move reset.prepare across Fixes: 63572937 ("drm/i915/execlists: Flush pending preemption events during reset") Testcase: igt/drv_module_reload/basic-reload-inject Testcase: igt/gem_eio Signed-off-by:
Michał Winiarski <michal.winiarski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180717202932.1423-1-chris@chris-wilson.co.uk
-
Ben Skeggs authored
Workaround for issues seen on systems with large amounts of RAM, caused by display not supporting the same physical address limits as the other parts of the GPU. Signed-off-by:Ben Skeggs <bskeggs@redhat.com>
-
Anusha Srivatsa authored
RC model has these parameters that correspond with each of 15 ranges of RC buffer threshold value in the RC model. The three elements are range_min_qp, range_max_qp and range_bpg_offset. Add the Rate Control range values for eDP/MIPI and DP case. The actual values are calculated usung a helper function. This patch adds the shifts to registers where the value will be written during atomic commit. v2: - Use _MMIO_PIPE() instead of _MMIO(_PICK()) (Manasi) - Combine shifts (Manasi) Cc: Jose Souza <jose.souza@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
Anusha Srivatsa <anusha.srivatsa@intel.com> Reviewed-by:
Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
-
