The version request can only send the version of protocol for which it
is initiated and gb_protocol_get_version() has all the information to
create the request structure.

Replace the 'request' and 'request_size' arguments to
gb_protocol_get_version() with a bool to know if the version information
of the protocol should be sent or not.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This shall be used later to find a firmware blob for the interface, lets
save it in the interface structure.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This patch ensures we account for roll-over in the loopback driver.
do_gettimeofday() is used to grab a timestamp. Two timestamps are derived
one before and one after a gb_operation_sync(), however since
do_gettimeofday() returns the number of seconds and mircoseconds that have
elapsed today - we need to account for a situation where the timestamp
starts at say 23:59:999us rolls over and the end time is now earlier than
the start time.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

We have a pattern similar to this over and over again gb->elapsed_nsecs =
timeval_to_ns(&te) - timeval_to_ns(&ts); good software practice dictates we
functionally decompose this. This patch decomposes into
gb_loopback_calc_latency().
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

In order to facilitate grabbing a timestamp that doesn't include greybus
overhead, this patch adds a timestamp right before usb_submit_urb() for
both es1.c and es2.c. Long term the timestmaping of messages like this
probably wants to go away but, for the moment it may have some use to the
firmware people instrumenting the performance of the system.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

For the ES2 test activity it may be beneficial to have a performance
metric that doesn't include any of the greybus stack malloc, workqueues
etc. In order to faciltate, this patch adds a simple kfifo structure to
hold two timestamp values. One timestamp will represent the last reasonable
point a greybus outbound timestamp can be taken, the other timestamp will
represent the first reasonable point an inbound timestamp can be taken. In
order to facilitate this model, tracking the timestamps in the connection
structure appears to be the best place to keep store of this data.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

On device_add() failure in gb_connection_create_range() we jump to
err_remove_ida. Instead we should be jumping to err_free_connection, so
change the flow to accomodate.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Some of the parameters are not really required, drop them.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

No more users now, drop it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

These weren't preserved earlier, save them in the connection structure
instead of creating its own fields..
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This is done from a common place now, no need to replicate it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This is done from a common place now, no need to replicate it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This is done from a common place now, no need to replicate it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This is done from a common place now, no need to replicate it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This is done from a common place now, no need to replicate it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This is done from a common place now, no need to replicate it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This is done from a common place now, no need to replicate it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This is done from a common place now, no need to replicate it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This is done from a common place now, no need to replicate it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This is done from a common place now, no need to replicate it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This is done from a common place now, no need to replicate it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This is done from a common place now, no need to replicate it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This is done from a common place now, no need to replicate it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This is done from a common place now, no need to replicate it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This can (should) be done from a common place as its required for most
of the protocols. Do it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Save major/minor number supported by the module inside connection
structure, as this can be used later.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Some request numbers (like invalid and get_version) are same across all
protocols. Create common macros for them.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Its possible for connection_init() to fail, in such cases the
disconnected event must be sent to the module.

It is missing currently, fix it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

!= was used in place of <, while comparing expected and actual payload
size. The module may be running a higher version of the protocol and
might have some extra fields (towards the end) in the structure, and the
AP needs to ignore them.

This also updates the print (expected-payload-size <
actual-payload-size), when the size doesn't match for requests received
by the module. This gives more details required for debugging.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This increases readability a bit more, as it tells which value is actual
size and which one is expected size.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Its handled by the firmware driver now, drop the FIXME comment from svc
code.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

We already have macros for these, use them instead of writing fixed
values.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

We already have macros for these, use them instead of writing fixed
values.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

We already have macros for these, use them instead of writing fixed
values.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

We already have macros for these, use them instead of writing fixed
values.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

We already have macros for these, use them instead of writing fixed
values.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

We already have macros for these, use them instead of writing fixed
values.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

We already have macros for these, use them instead of writing fixed
values.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

We already have macros for these, use them instead of writing fixed
values.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

We already have macros for these, use them instead of writing fixed
values.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>