- 08 May, 2007 40 commits
-
-
Jiri Slaby authored
isicom, use pr_debug Signed-off-by:
Jiri Slaby <jirislaby@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Jiri Slaby authored
mxser, schedule for removal Signed-off-by:
-
Jiri Slaby authored
Test if base addr is non-null in ISR to prove the card has been correctly initialized. This is needed for DEBUG_SHIRQ for example. Signed-off-by:
-
Jiri Slaby authored
Without this patch, the driver sometimes causes "IRQXX: Nobody cares". Fix it by turning off irqs when releasing. Signed-off-by:
-
Jiri Slaby authored
Do not register all tty devices at the init time, delay it for the time until some device is found. Signed-off-by:
-
Jiri Slaby authored
- do not panic if tty_register_driver fails - handle fail paths properly Signed-off-by:
-
Jiri Slaby authored
Signed-off-by:
-
Jiri Slaby authored
Signed-off-by:
-
Jiri Slaby authored
Signed-off-by:
-
Jiri Slaby authored
Move probing code to separate function for easy pci probing conversion. Signed-off-by:
-
Jiri Slaby authored
There will be no other choice after introducing pci probing anyway. Signed-off-by:
-
Jiri Slaby authored
fork remove code for pci -- move it to separate, new, function and don't care about pci in the former. Signed-off-by:
-
Jiri Slaby authored
Move Ze init code into new cy_init_Ze, because we will need it in another place and it will make the code totally unreadable. Signed-off-by:
-
Bjorn Helgaas authored
Make x86 COM ports into platform devices and don't probe for them if we have PNP. This prevents double discovery, where a device was found both by the legacy probe and by 8250_pnp, e.g., serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A This also means IRDA devices without a UART PNP ID will no longer be claimed by the serial driver, which might require changes in IRDA drivers and administration. In addition to this patch, you may need to configure a setserial init script, e.g., /etc/init.d/setserial, so it doesn't poke legacy UART stuff back in. On Debian, "dpkg-reconfigure setserial" with the "kernel" option does this. To force the old legacy probe behavior even when we have PNPBIOS or ACPI, load the new legacy_serial module (or build 8250 static) with the "legacy_serial.force" option. [akpm@linux-foundation.org: fix makefiles] Signed-off-by:Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Keith Owens <kaos@ocs.com.au> Cc: Len Brown <lenb@kernel.org> Cc: Adam Belay <ambx1@neo.rr.com> Cc: Matthieu CASTET <castet.matthieu@free.fr> Cc: Jean Tourrilhes <jt@hpl.hp.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Ville Syrjala <syrjala@sci.fi> Cc: Russell King <rmk+serial@arm.linux.org.uk> Cc: Samuel Ortiz <samuel@sortiz.org> Signed-off-by:
-
Bjorn Helgaas authored
Claim devices using PNP, unless the user explicitly specified device addresses. This can be disabled with the "smsc-ircc2.nopnp" option. This removes the need for probing legacy addresses and helps untangle IR devices from serial8250 devices. Sometimes the SMC device is at a legacy COM port address but does not use the legacy COM IRQ. In this case, claiming the device using PNP rather than 8250 legacy probe means we can automatically use the correct IRQ rather than forcing the user to use "setserial" to set the IRQ manually. If the PNP claim doesn't work, make sure you don't have a setserial init script, e.g., /etc/init.d/setserial, configured to poke in legacy COM port resources for the IRDA device. That causes the serial driver to claim resources needed by this driver. Based on this patch by Ville Syrjälä: http://www.hpl.hp.com/personal/Jean_Tourrilhes/IrDA/ir260_smsc_pnp.diffSigned-off-by:Samuel Ortiz <samuel@sortiz.org> Signed-off-by:
-
Bjorn Helgaas authored
To determine whether the user specified a module parameter, use some #defines instead of checking for bare magic numbers. Signed-off-by:
-
Bjorn Helgaas authored
Some HP/Compaq firmware reports via ACPI that the SMCF010 IR device is enabled, but in fact, it leaves the device partly disabled. HP nw8240 BIOS 68DTV Ver. F.0F, released 9/15/2005 is one BIOS that has this problem. Signed-off-by:
-
Bjorn Helgaas authored
This series converts i386 and x86_64 legacy serial ports to be platform devices and prevents probing for them if we have PNP. This prevents double discovery, where a device was found both by the legacy probe and by 8250_pnp. This also prevents the serial driver from claiming IRDA devices (unless they have a UART PNP ID). The serial legacy probe sometimes assumed the wrong IRQ, so the user had to use "setserial" to fix it. Removing the need for setserial to make IRDA devices work seems good, but it does break some things. In particular, you may need to keep setserial from poking legacy UART stuff back in by doing something like "dpkg-reconfigure setserial" with the "kernel" option. Otherwise, the setserial-discovered "UART" will claim resources and prevent the IRDA driver from loading. This patch: If we can discover devices using PNP, we can skip some legacy probes. This flag ("pnp_platform_devices") indicates that PNPBIOS or PNPACPI is enabled and should tell us about builtin devices. Signed-off-by: -
Jiri Slaby authored
cyclades, remove useless casts Signed-off-by:
-
Jiri Slaby authored
cyclades, remove volatiles Signed-off-by:
-
Jiri Slaby authored
cyclades, timer cleanup Signed-off-by:
-
Jiri Slaby authored
cyclades, cy_readX/writeX cleanup - cy_readX are placeholders for readX, remove it - move cy_writeX macros into do {} while(0) to be safe Signed-off-by: -
Jiri Slaby authored
cyclades, remove PAUSE PAUSE expands to do {} while (0), it's useless. Signed-off-by: -
Bernhard Walle authored
Add IRQF_IRQPOLL for each timer interrupt. Signed-off-by:
Bernhard Walle <bwalle@suse.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
-
Bernhard Walle authored
Add IRQF_IRQPOLL to the timer interrupt on parisc. Signed-off-by:
-
Bernhard Walle authored
Add IRQF_IRQPOLL on each timer interrupt on SH2. Signed-off-by:
-
Bernhard Walle authored
Add IRQF_IRQPOLL for the timer interrupt on IA64. Signed-off-by:
-
Bernhard Walle authored
Add IRQF_IRQPOLL to timer interrupts on i386. Signed-off-by:
-
Bernhard Walle authored
Add IRQF_IRQPOLL for the timer interrupt on x86_64. Signed-off-by:
-
Bernhard Walle authored
irqpoll is broken on some architectures that don't use the IRQ 0 for the timer interrupt like IA64. This patch adds a IRQF_IRQPOLL flag. Each architecture is handled in a separate pach. As I left the irq == 0 as condition, this should not break existing architectures that use timer_irq == 0 and that I did't address with that patch (because I don't know). This patch: This patch adds a IRQF_IRQPOLL flag that the interrupt registration code could use for the interrupt it wants to use for IRQ polling. Because this must not be the timer interrupt, an additional flag was added instead of re-using the IRQF_TIMER constant. Until all architectures will have an IRQF_IRQPOLL interrupt, irq == 0 will stay as alternative as it should not break anything. Also, note_interrupt() is called on CPU-specific interrupts to be used as interrupt source for IRQ polling. Signed-off-by:
-
Dmitriy Monakhov authored
sb_read may return NULL, let's explicitly check it. Signed-off-by:
Dmitriy Monakhov <dmonakhov@openvz.org> Cc: Jan Kara <jack@ucw.cz> Signed-off-by:
-
Jan Kara authored
Make UDF work correctly for files larger than 1GB. As no extent can be longer than (1<<30)-blocksize bytes, we have to create several extents if a big hole is being created. As a side-effect, we now don't discard preallocated blocks when creating a hole. Signed-off-by:
Jan Kara <jack@suse.cz> Acked-by:
Christoph Hellwig <hch@infradead.org> Signed-off-by:
-
Jan Kara authored
Add a few assertions into udf_discard_prealloc() to check that the file is sane (mostly helps debugging further patches ;). Signed-off-by:
-
Jan Kara authored
Make UDF use get_bh() instead of directly accessing b_count and use brelse() instead of udf_release_data() which does just brelse()... Signed-off-by:
-
Jan Kara authored
Introduce a structure extent_position to store a position of an extent and the corresponding buffer_head in one place. Signed-off-by:
-
Jan Kara authored
Use sector_t and loff_t for file offsets in UDF filesystem. Otherwise an overflow may occur for long files. Also make inode_bmap() return offset in the extent in number of blocks instead of number of bytes - for most callers this is more convenient. Signed-off-by:
-
Peter Zijlstra authored
Change the atomic_t in struct nfs_server to atomic_long_t in anticipation of machines that can handle 8+TB of (4K) pages under writeback. However I suspect other things in NFS will start going *bang* by then. Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by:
-
Adrian Bunk authored
Include the new linux/kdebug.h instead of asm/kdebug.h. Simply remove the asm/kdebug.h include if both had been included. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Robert P. J. Day authored
Tweak and add content for extractable documentation in asm-i386/atomic.h. Signed-off-by:
Robert P. J. Day <rpjday@mindspring.com> Acked-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Jeff Dike authored
Allow a pcap device to be assigned a MAC on the command line. They don't really need one, but it is handy to be able to do when your distro assigns a new ethernet device whenever it sees a new MAC. Signed-off-by:
Jeff Dike <jdike@linux.intel.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by:
-
