A 'struct bio' is allocated in scrub_missing_raid56_pages(), but it was never
freed anywhere.
Signed-off-by: Scott Talbert <scott.talbert@hgst.com>
Signed-off-by: David Sterba <dsterba@suse.com>

The macro btrfs_std_error got renamed to btrfs_handle_fs_error in an
independent branch for the same merge target (4.7). To make the code
compilable for bisectability reasons, add a temporary stub.
Signed-off-by: David Sterba <dsterba@suse.com>

Current btrfs qgroup design implies a requirement that after calling
btrfs_qgroup_account_extents() there must be a commit root switch.

Normally this is OK, as btrfs_qgroup_accounting_extents() is only called
inside btrfs_commit_transaction() just be commit_cowonly_roots().

However there is a exception at create_pending_snapshot(), which will
call btrfs_qgroup_account_extents() but no any commit root switch.

In case of creating a snapshot whose parent root is itself (create a
snapshot of fs tree), it will corrupt qgroup by the following trace:
(skipped unrelated data)
======
btrfs_qgroup_account_extent: bytenr = 29786112, num_bytes = 16384, nr_old_roots = 0, nr_new_roots = 1
qgroup_update_counters: qgid = 5, cur_old_count = 0, cur_new_count = 1, rfer = 0, excl = 0
qgroup_update_counters: qgid = 5, cur_old_count = 0, cur_new_count = 1, rfer = 16384, excl = 16384
btrfs_qgroup_account_extent: bytenr = 29786112, num_bytes = 16384, nr_old_roots = 0, nr_new_roots = 0
======

The problem here is in first qgroup_account_extent(), the
nr_new_roots of the extent is 1, which means its reference got
increased, and qgroup increased its rfer and excl.

But at second qgroup_account_extent(), its reference got decreased, but
between these two qgroup_account_extent(), there is no switch roots.
This leads to the same nr_old_roots, and this extent just got ignored by
qgroup, which means this extent is wrongly accounted.

Fix it by call commit_cowonly_roots() after qgroup_account_extent() in
create_pending_snapshot(), with needed preparation.

Mark: I added a check at the top of qgroup_account_snapshot() to skip this
code if qgroups are turned off. xfstest btrfs/122 exposes this problem.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>

Make sure to deallocate fspath with vfree() in case of error in
init_ipath().

fspath is allocated with vmalloc() in init_data_container() since
commit 425d17a2 ("Btrfs: use larger limit for translation of logical to
inode").
Signed-off-by: Vincent Stehlé <vincent.stehle@intel.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Be verbose if there are no workspaces at all, ie. the module init time
preallocation failed.
Signed-off-by: David Sterba <dsterba@suse.com>

With just one preallocated workspace we can guarantee forward progress
even if there's no memory available for new workspaces. The cost is more
waiting but we also get rid of several error paths.

On average, there will be several idle workspaces, so the waiting
penalty won't be so bad.

In the worst case, all cpus will compete for one workspace until there's
some memory. Attempts to allocate a new one are done each time the
waiters are woken up.
Signed-off-by: David Sterba <dsterba@suse.com>

Preallocate one workspace for each compression type so we can guarantee
forward progress in the worst case. A failure cannot be a hard error as
we might not use compression at all on the filesystem. If we can't
allocate the workspaces later when need them, it might actually
deadlock, but in such situation the system has effectively not enough
memory to operate properly.
Signed-off-by: David Sterba <dsterba@suse.com>

The names are confusing, pick more fitting names and add comments.
Signed-off-by: David Sterba <dsterba@suse.com>

UBSAN: Undefined behaviour in fs/btrfs/extent-tree.c:4623:21
signed integer overflow:
10808 * 262144 cannot be represented in type 'int [8]'

If 8192<=items<16384, we request a writeback of an insane number of pages
which is benign (everything will be written).  But if items>=16384, the
space reservation won't be enough.
Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

During a mount, we start the cleaner kthread first because the transaction
kthread wants to wake up the cleaner kthread.  We start the transaction
kthread next because everything in btrfs wants transactions.  We do reloc
recovery in the thread that was doing the original mount call once the
transaction kthread is running.  This means that the cleaner kthread
could already be running when reloc recovery happens (e.g. if a snapshot
delete was started before a crash).

Relocation does not play well with the cleaner kthread, so a mutex was
added in commit 5f316481 "Btrfs: fix
race between balance recovery and root deletion" to prevent both from
being active at the same time.

If the cleaner kthread is already holding the mutex by the time we get
to btrfs_recover_relocation, the mount will be blocked until at least
one deleted subvolume is cleaned (possibly more if the mount process
doesn't get the lock right away).  During this time (which could be an
arbitrarily long time on a large/slow filesystem), the mount process is
stuck and the filesystem is unnecessarily inaccessible.

Fix this by locking cleaner_mutex before we start cleaner_kthread, and
unlocking the mutex after mount no longer requires it.  This ensures
that the mounting process will not be blocked by the cleaner kthread.
The cleaner kthread is already prepared for mutex contention and will
just go to sleep until the mutex is available.
Signed-off-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Move the op exclusivity check before the other code (same as in
ADD_DEV).
Signed-off-by: David Sterba <dsterba@suse.com>

Perform the want_write check if we get far enough to do any writes.
Signed-off-by: David Sterba <dsterba@suse.com>

Move scratch super outside of the chunk lock to avoid below
lockdep warning. The better place to scratch super is in
the function btrfs_rm_dev_replace_free_srcdev() just before
free_device, which is outside of the chunk lock as well.

To reproduce:
  (fresh boot)
  mkfs.btrfs -f -draid5 -mraid5 /dev/sdc /dev/sdd /dev/sde
  mount /dev/sdc /btrfs
  dd if=/dev/zero of=/btrfs/tf1 bs=4096 count=100
  (get devmgt from https://github.com/asj/devmgt.git)
  devmgt detach /dev/sde
  dd if=/dev/zero of=/btrfs/tf1 bs=4096 count=100
  sync
  btrfs replace start -Brf 3 /dev/sdf /btrfs <--
  devmgt attach host7

======================================================
[ INFO: possible circular locking dependency detected ]
4.6.0-rc2asj+ #1 Not tainted
---------------------------------------------------

btrfs/2174 is trying to acquire lock:
(sb_writers){.+.+.+}, at:
[<ffffffff812449b4>] __sb_start_write+0xb4/0xf0

but task is already holding lock:
(&fs_info->chunk_mutex){+.+.+.}, at:
[<ffffffffa05c5f55>] btrfs_dev_replace_finishing+0x145/0x980 [btrfs]

which lock already depends on the new lock.

Chain exists of:
sb_writers --> &fs_devs->device_list_mutex --> &fs_info->chunk_mutex
Possible unsafe locking scenario:
CPU0				CPU1
----				----
lock(&fs_info->chunk_mutex);
				lock(&fs_devs->device_list_mutex);
				lock(&fs_info->chunk_mutex);
lock(sb_writers);

*** DEADLOCK ***

-> #0 (sb_writers){.+.+.+}:
[<ffffffff810e6415>] __lock_acquire+0x1bc5/0x1ee0
[<ffffffff810e707e>] lock_acquire+0xbe/0x210
[<ffffffff810df49a>] percpu_down_read+0x4a/0xa0
[<ffffffff812449b4>] __sb_start_write+0xb4/0xf0
[<ffffffff81265534>] mnt_want_write+0x24/0x50
[<ffffffff812508a2>] path_openat+0x952/0x1190
[<ffffffff81252451>] do_filp_open+0x91/0x100
[<ffffffff8123f5cc>] file_open_name+0xfc/0x140
[<ffffffff8123f643>] filp_open+0x33/0x60
[<ffffffffa0572bb6>] update_dev_time+0x16/0x40 [btrfs]
[<ffffffffa057f60d>] btrfs_scratch_superblocks+0x5d/0xb0 [btrfs]
[<ffffffffa057f70e>] btrfs_rm_dev_replace_remove_srcdev+0xae/0xd0 [btrfs]
[<ffffffffa05c62c5>] btrfs_dev_replace_finishing+0x4b5/0x980 [btrfs]
[<ffffffffa05c6ae8>] btrfs_dev_replace_start+0x358/0x530 [btrfs]
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>

pagev array in scrub_block{} is of size SCRUB_MAX_PAGES_PER_BLOCK.
page_index should be checked with the same to trigger BUG_ON().
Signed-off-by: Ashish Samant <ashish.samant@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs_map_block can go horribly wrong in the face of fs corruption, lets agree
to not be assholes and panic at any possible chance things are all fucked up.
Signed-off-by: Josef Bacik <jbacik@fb.com>
[ removed type casts ]
Signed-off-by: David Sterba <dsterba@suse.com>

The struct 'map_lookup' uses type int for @stripe_len, while
btrfs_chunk_stripe_len() can return a u64 value, and it may end up with
@stripe_len being undefined value and it can lead to 'divide error' in
 __btrfs_map_block().

This changes 'map_lookup' to use type u64 for stripe_len, also right now
we only use BTRFS_STRIPE_LEN for stripe_len, so this adds a valid checker for
BTRFS_STRIPE_LEN.
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Reported-by: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ folded division fix to scrub_raid56_parity ]
Signed-off-by: David Sterba <dsterba@suse.com>

If the label setting ioctl races with sysfs label handler, we could get
mixed result in the output, part old part new. We should either get the
old or new label. The chances to hit this race are low.
Signed-off-by: David Sterba <dsterba@suse.com>

Add a sanity check for the fs_info as we will dereference it, similar to
what the 'store features' handler does.
Signed-off-by: David Sterba <dsterba@suse.com>

We don't want to trigger the change on a read-only filesystem, similar
to what the label handler does.
Signed-off-by: David Sterba <dsterba@suse.cz>

The key variable occupies 17 bytes, the key_start is used once, we can
simply reuse existing 'key' for that purpose. As the key is not a simple
type, compiler doest not do it on itself.
Signed-off-by: David Sterba <dsterba@suse.com>

The size of root item is more than 400 bytes, which is quite a lot of
stack space. As we do IO from inside the subvolume ioctls, we should
keep the stack usage low in case the filesystem is on top of other
layers (NFS, device mapper, iscsi, etc).
Reviewed-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Signed-off-by: David Sterba <dsterba@suse.com>

Signed-off-by: David Sterba <dsterba@suse.com>

Signed-off-by: David Sterba <dsterba@suse.com>

We're going to use the argument multiple times later.
Signed-off-by: David Sterba <dsterba@suse.com>

Signed-off-by: David Sterba <dsterba@suse.com>

Signed-off-by: David Sterba <dsterba@suse.com>

When the replace target fails, the target device will be taken
out of fs device list, scratch + update_dev_time and freed. However
we could do the scratch  + update_dev_time and free part after the
device has been taken out of device list, so that we don't have to
hold the device_list_mutex and uuid_mutex locks.

Reported issue:

[ 5375.718845] ======================================================
[ 5375.718846] [ INFO: possible circular locking dependency detected ]
[ 5375.718849] 4.4.5-scst31x-debug-11+ #40 Not tainted
[ 5375.718849] -------------------------------------------------------
[ 5375.718851] btrfs-health/4662 is trying to acquire lock:
[ 5375.718861]  (sb_writers){.+.+.+}, at: [<ffffffff812214f7>] __sb_start_write+0xb7/0xf0
[ 5375.718862]
[ 5375.718862] but task is already holding lock:
[ 5375.718907]  (&fs_devs->device_list_mutex){+.+.+.}, at: [<ffffffffa028263c>] btrfs_destroy_dev_replace_tgtdev+0x3c/0x150 [btrfs]
[ 5375.718907]
[ 5375.718907] which lock already depends on the new lock.
[ 5375.718907]
[ 5375.718908]
[ 5375.718908] the existing dependency chain (in reverse order) is:
[ 5375.718911]
[ 5375.718911] -> #3 (&fs_devs->device_list_mutex){+.+.+.}:
[ 5375.718917]        [<ffffffff810da4be>] lock_acquire+0xce/0x1e0
[ 5375.718921]        [<ffffffff81633949>] mutex_lock_nested+0x69/0x3c0
[ 5375.718940]        [<ffffffffa0219bf6>] btrfs_show_devname+0x36/0x210 [btrfs]
[ 5375.718945]        [<ffffffff81267079>] show_vfsmnt+0x49/0x150
[ 5375.718948]        [<ffffffff81240b07>] m_show+0x17/0x20
[ 5375.718951]        [<ffffffff81246868>] seq_read+0x2d8/0x3b0
[ 5375.718955]        [<ffffffff8121df28>] __vfs_read+0x28/0xd0
[ 5375.718959]        [<ffffffff8121e806>] vfs_read+0x86/0x130
[ 5375.718962]        [<ffffffff8121f4c9>] SyS_read+0x49/0xa0
[ 5375.718966]        [<ffffffff81637976>] entry_SYSCALL_64_fastpath+0x16/0x7a
[ 5375.718968]
[ 5375.718968] -> #2 (namespace_sem){+++++.}:
[ 5375.718971]        [<ffffffff810da4be>] lock_acquire+0xce/0x1e0
[ 5375.718974]        [<ffffffff81635199>] down_write+0x49/0x80
[ 5375.718977]        [<ffffffff81243593>] lock_mount+0x43/0x1c0
[ 5375.718979]        [<ffffffff81243c13>] do_add_mount+0x23/0xd0
[ 5375.718982]        [<ffffffff81244afb>] do_mount+0x27b/0xe30
[ 5375.718985]        [<ffffffff812459dc>] SyS_mount+0x8c/0xd0
[ 5375.718988]        [<ffffffff81637976>] entry_SYSCALL_64_fastpath+0x16/0x7a
[ 5375.718991]
[ 5375.718991] -> #1 (&sb->s_type->i_mutex_key#5){+.+.+.}:
[ 5375.718994]        [<ffffffff810da4be>] lock_acquire+0xce/0x1e0
[ 5375.718996]        [<ffffffff81633949>] mutex_lock_nested+0x69/0x3c0
[ 5375.719001]        [<ffffffff8122d608>] path_openat+0x468/0x1360
[ 5375.719004]        [<ffffffff8122f86e>] do_filp_open+0x7e/0xe0
[ 5375.719007]        [<ffffffff8121da7b>] do_sys_open+0x12b/0x210
[ 5375.719010]        [<ffffffff8121db7e>] SyS_open+0x1e/0x20
[ 5375.719013]        [<ffffffff81637976>] entry_SYSCALL_64_fastpath+0x16/0x7a
[ 5375.719015]
[ 5375.719015] -> #0 (sb_writers){.+.+.+}:
[ 5375.719018]        [<ffffffff810d97ca>] __lock_acquire+0x17ba/0x1ae0
[ 5375.719021]        [<ffffffff810da4be>] lock_acquire+0xce/0x1e0
[ 5375.719026]        [<ffffffff810d3bef>] percpu_down_read+0x4f/0xa0
[ 5375.719028]        [<ffffffff812214f7>] __sb_start_write+0xb7/0xf0
[ 5375.719031]        [<ffffffff81242eb4>] mnt_want_write+0x24/0x50
[ 5375.719035]        [<ffffffff8122ded2>] path_openat+0xd32/0x1360
[ 5375.719037]        [<ffffffff8122f86e>] do_filp_open+0x7e/0xe0
[ 5375.719040]        [<ffffffff8121d8a4>] file_open_name+0xe4/0x130
[ 5375.719043]        [<ffffffff8121d923>] filp_open+0x33/0x60
[ 5375.719073]        [<ffffffffa02776a6>] update_dev_time+0x16/0x40 [btrfs]
[ 5375.719099]        [<ffffffffa02825be>] btrfs_scratch_superblocks+0x4e/0x90 [btrfs]
[ 5375.719123]        [<ffffffffa0282665>] btrfs_destroy_dev_replace_tgtdev+0x65/0x150 [btrfs]
[ 5375.719150]        [<ffffffffa02c6c80>] btrfs_dev_replace_finishing+0x6b0/0x990 [btrfs]
[ 5375.719175]        [<ffffffffa02c729e>] btrfs_dev_replace_start+0x33e/0x540 [btrfs]
[ 5375.719199]        [<ffffffffa02c7f58>] btrfs_auto_replace_start+0xf8/0x140 [btrfs]
[ 5375.719222]        [<ffffffffa02464e6>] health_kthread+0x246/0x490 [btrfs]
[ 5375.719225]        [<ffffffff810a70df>] kthread+0xef/0x110
[ 5375.719229]        [<ffffffff81637d2f>] ret_from_fork+0x3f/0x70
[ 5375.719230]
[ 5375.719230] other info that might help us debug this:
[ 5375.719230]
[ 5375.719233] Chain exists of:
[ 5375.719233]   sb_writers --> namespace_sem --> &fs_devs->device_list_mutex
[ 5375.719233]
[ 5375.719234]  Possible unsafe locking scenario:
[ 5375.719234]
[ 5375.719234]        CPU0                    CPU1
[ 5375.719235]        ----                    ----
[ 5375.719236]   lock(&fs_devs->device_list_mutex);
[ 5375.719238]                                lock(namespace_sem);
[ 5375.719239]                                lock(&fs_devs->device_list_mutex);
[ 5375.719241]   lock(sb_writers);
[ 5375.719241]
[ 5375.719241]  *** DEADLOCK ***
[ 5375.719241]
[ 5375.719243] 4 locks held by btrfs-health/4662:
[ 5375.719266]  #0:  (&fs_info->health_mutex){+.+.+.}, at: [<ffffffffa0246303>] health_kthread+0x63/0x490 [btrfs]
[ 5375.719293]  #1:  (&fs_info->dev_replace.lock_finishing_cancel_unmount){+.+.+.}, at: [<ffffffffa02c6611>] btrfs_dev_replace_finishing+0x41/0x990 [btrfs]
[ 5375.719319]  #2:  (uuid_mutex){+.+.+.}, at: [<ffffffffa0282620>] btrfs_destroy_dev_replace_tgtdev+0x20/0x150 [btrfs]
[ 5375.719343]  #3:  (&fs_devs->device_list_mutex){+.+.+.}, at: [<ffffffffa028263c>] btrfs_destroy_dev_replace_tgtdev+0x3c/0x150 [btrfs]
[ 5375.719343]
[ 5375.719343] stack backtrace:
[ 5375.719347] CPU: 2 PID: 4662 Comm: btrfs-health Not tainted 4.4.5-scst31x-debug-11+ #40
[ 5375.719348] Hardware name: Supermicro SYS-6018R-WTRT/X10DRW-iT, BIOS 1.0c 01/07/2015
[ 5375.719352]  0000000000000000 ffff880856f73880 ffffffff813529e3 ffffffff826182a0
[ 5375.719354]  ffffffff8260c090 ffff880856f738c0 ffffffff810d667c ffff880856f73930
[ 5375.719357]  ffff880861f32b40 ffff880861f32b68 0000000000000003 0000000000000004
[ 5375.719357] Call Trace:
[ 5375.719363]  [<ffffffff813529e3>] dump_stack+0x85/0xc2
[ 5375.719366]  [<ffffffff810d667c>] print_circular_bug+0x1ec/0x260
[ 5375.719369]  [<ffffffff810d97ca>] __lock_acquire+0x17ba/0x1ae0
[ 5375.719373]  [<ffffffff810f606d>] ? debug_lockdep_rcu_enabled+0x1d/0x20
[ 5375.719376]  [<ffffffff810da4be>] lock_acquire+0xce/0x1e0
[ 5375.719378]  [<ffffffff812214f7>] ? __sb_start_write+0xb7/0xf0
[ 5375.719383]  [<ffffffff810d3bef>] percpu_down_read+0x4f/0xa0
[ 5375.719385]  [<ffffffff812214f7>] ? __sb_start_write+0xb7/0xf0
[ 5375.719387]  [<ffffffff812214f7>] __sb_start_write+0xb7/0xf0
[ 5375.719389]  [<ffffffff81242eb4>] mnt_want_write+0x24/0x50
[ 5375.719393]  [<ffffffff8122ded2>] path_openat+0xd32/0x1360
[ 5375.719415]  [<ffffffffa02462a0>] ? btrfs_congested_fn+0x180/0x180 [btrfs]
[ 5375.719418]  [<ffffffff810f606d>] ? debug_lockdep_rcu_enabled+0x1d/0x20
[ 5375.719420]  [<ffffffff8122f86e>] do_filp_open+0x7e/0xe0
[ 5375.719423]  [<ffffffff810f615d>] ? rcu_read_lock_sched_held+0x6d/0x80
[ 5375.719426]  [<ffffffff81201a9b>] ? kmem_cache_alloc+0x26b/0x5d0
[ 5375.719430]  [<ffffffff8122e7d4>] ? getname_kernel+0x34/0x120
[ 5375.719433]  [<ffffffff8121d8a4>] file_open_name+0xe4/0x130
[ 5375.719436]  [<ffffffff8121d923>] filp_open+0x33/0x60
[ 5375.719462]  [<ffffffffa02776a6>] update_dev_time+0x16/0x40 [btrfs]
[ 5375.719485]  [<ffffffffa02825be>] btrfs_scratch_superblocks+0x4e/0x90 [btrfs]
[ 5375.719506]  [<ffffffffa0282665>] btrfs_destroy_dev_replace_tgtdev+0x65/0x150 [btrfs]
[ 5375.719530]  [<ffffffffa02c6c80>] btrfs_dev_replace_finishing+0x6b0/0x990 [btrfs]
[ 5375.719554]  [<ffffffffa02c6b23>] ? btrfs_dev_replace_finishing+0x553/0x990 [btrfs]
[ 5375.719576]  [<ffffffffa02c729e>] btrfs_dev_replace_start+0x33e/0x540 [btrfs]
[ 5375.719598]  [<ffffffffa02c7f58>] btrfs_auto_replace_start+0xf8/0x140 [btrfs]
[ 5375.719621]  [<ffffffffa02464e6>] health_kthread+0x246/0x490 [btrfs]
[ 5375.719641]  [<ffffffffa02463d8>] ? health_kthread+0x138/0x490 [btrfs]
[ 5375.719661]  [<ffffffffa02462a0>] ? btrfs_congested_fn+0x180/0x180 [btrfs]
[ 5375.719663]  [<ffffffff810a70df>] kthread+0xef/0x110
[ 5375.719666]  [<ffffffff810a6ff0>] ? kthread_create_on_node+0x200/0x200
[ 5375.719669]  [<ffffffff81637d2f>] ret_from_fork+0x3f/0x70
[ 5375.719672]  [<ffffffff810a6ff0>] ? kthread_create_on_node+0x200/0x200
[ 5375.719697] ------------[ cut here ]------------
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reported-by: Yauhen Kharuzhy <yauhen.kharuzhy@zavadatar.com>
Signed-off-by: David Sterba <dsterba@suse.com>

The "sizeof(*arg->clone_sources) * arg->clone_sources_count" expression
can overflow.  It causes several static checker warnings.  It's all
under CAP_SYS_ADMIN so it's not that serious but lets silence the
warnings.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Since mixed block groups accounting isn't byte-accurate and f_bree is an
unsigned integer, it could overflow. Avoid this.
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Suggested-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Metadata for mixed block is already accounted in total data and should not
be counted as part of the free metadata space.
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=114281Signed-off-by: David Sterba <dsterba@suse.com>

Currently, we don't allow the user to try and rebalance to a dup profile
on a multi-device filesystem.  In most cases, this is a perfectly sensible
restriction as raid1 uses the same amount of space and provides better
protection.

However, when reshaping a multi-device filesystem down to a single device
filesystem, this requires the user to convert metadata and system chunks
to single profile before deleting devices, and then convert again to dup,
which leaves a period of time where metadata integrity is reduced.

This patch removes the single-device-only restriction from converting to
dup profile to remove this potential data integrity reduction.
Signed-off-by: Austin S. Hemmelgarn <ahferroin7@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Now we force to create empty block group to keep data profile alive,
however, in the below example, we eventually get an empty block group
while we're trying to get more space for other types (metadata/system),

- Before,
block group "A": size=2G, used=1.2G
block group "B": size=2G, used=512M

- After "btrfs balance start -dusage=50 mount_point",
block group "A": size=2G, used=(1.2+0.5)G
block group "C": size=2G, used=0

Since there is no data in block group C, it won't be deleted
automatically and we have to get the unused 2G until the next mount.

Balance itself just moves data and doesn't remove data, so it's safe
to not create such a empty block group if we already have data
 allocated in other block groups.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>

The delalloc reserved space is calculated in terms of number of bytes
used by an integral number of blocks. This is done by rounding down the
value of 'pos' to the nearest multiple of sectorsize.

The file offset value held by 'pos' variable may not be aligned to
sectorsize and hence when passing it as an argument to
btrfs_delalloc_release_space(), we may end up releasing larger delalloc
space than we originally had reserved.
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Now that we bail out immediately if ->writepage() returns an error,
we don't need an extra error to retain the error code.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>

If sequential writer is writing in the middle of the page and it just redirties
the last written page by continuing from it.

In the above case this can end up with seeking back to that firstly redirtied
page after writing all the pages at the end of file because btrfs updates
mapping->writeback_index to 1 past the current one.

For non-cow filesystems, the cost is only about extra seek, while for cow
filesystems such as btrfs, it means unnecessary fragments.

To avoid it, we just need to continue writeback from the last written page.

This also updates btrfs to behave like what write_cache_pages() does, ie, bail
 out immediately if there is an error in writepage().

<Ref: https://www.spinics.net/lists/linux-btrfs/msg52628.html>
Reported-by: Holger Hoffstätte <holger.hoffstaette@googlemail.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>

32-bit ioctl uses these rather than the regular FS_IOC_* versions. They can
be handled in btrfs using the same code. Without this, 32-bit {ch,ls}attr
fail.
Signed-off-by: Luke Dashjr <luke-jr+git@utopios.org>
Cc: stable@vger.kernel.org
Reviewed-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Pull thermal fixes from Eduardo Valentin:
 "Specifics in this pull request:

   - Fixes in mediatek and OF thermal drivers

   - Fixes in power_allocator governor

   - More fixes of unsigned to int type change in thermal_core.c.

  These change have been CI tested using KernelCI bot. \o/"

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal:
  thermal: fix Mediatek thermal controller build
  thermal: consistently use int for trip temp
  thermal: fix mtk_thermal build dependency
  thermal: minor mtk_thermal.c cleanups
  thermal: power_allocator: req_range multiplication should be a 64 bit type
  thermal: of: add __init attribute