- 16 Dec, 2018 1 commit
-
-
Shawn Guo authored
Freescale arm64 device tree update for 4.21: - Add device tree for LS1028A SoC and NXP FRWY & QDS boards support based on this SoC. - Add device tree for LX2160A SoC and NXP QDS & RDB boards support based on this SoC. - Add qdma devices for LS1043A and LS1046A SoC. - Disable PCIe device by default in SoC device tree and let board level device tree to enable as needed. - Drop compatible string "snps,dw-pcie" from LayerScape PCIe devices to avoid incorrect matching. - Move fsl-mc device as a child node of soc node, and add missing dma-ranges property for LS1088A SoC. - Update LayerScape SoCs' cooling maps to include all devices affected by individual trip points.
-
- 10 Dec, 2018 39 commits
-
-
Andrey Smirnov authored
TPA6130A2 SD pin on RDU1 is not really controlled by SoC and instead is only meant to notify the system that audio was "muted" by external actors. To accommodate that, drop "power-gpio" property of hpa1 node as well as specify a name for that GPIO so that userspace can access it. Signed-off-by:
Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by:
Fabio Estevam <festevam@gmail.com> Tested-by:
Chris Healy <cphealy@gmail.com> Signed-off-by:
Shawn Guo <shawnguo@kernel.org>
-
Leonard Crestez authored
Fixes: 7d1cd297 ("ARM: dts: imx6ul: add gpmi support") Signed-off-by:
Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by:
-
Fabio Estevam authored
Passing GPIO_ACTIVE_HIGH as GPIO flags for the GPIO controlled regulator improves the readability, so use it instead of the hardcoded number. Signed-off-by:
-
Dong Aisheng authored
Add flexcan support for i.MX6UL board. Change the place of CAN node delete due to i.MX6ULZ include i.MX6UL dts but not support flexcan. Signed-off-by:
Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by:
Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by:
-
Jonathan Marek authored
This adds the gpu nodes for the adreno 200 GPU on iMX51 and iMX53, now supported by the freedreno driver. The compatible for the iMX51 uses a patchid of 1, which is used by drm/msm driver to identify the smaller 128KiB GMEM size. Signed-off-by:
Jonathan Marek <jonathan@marek.ca> Reviewed-by:
-
Anson Huang authored
Add accelerometer sensor mma8451 support on i2c1 bus. Signed-off-by:
Anson Huang <Anson.Huang@nxp.com> Reviewed-by:
-
Anson Huang authored
Add magnetometer sensor mag3110 support on i2c3 bus. Signed-off-by:
-
Anson Huang authored
Add isl29023 light sensor support on i2c3 bus, the light sensor's power is controlled by a fixed regulator, since the isl29023 driver and most of other sensors on same board like mag3110 and mma8451 do NOT support regulator operation currently, they are all controlled by this regulator, so this patch also adds the fixed regulator support and make it always on. Signed-off-by:
-
Fabio Estevam authored
It is not recommended to place regulators inside "simple-bus", so move them out to make it cleaner the addition of new regulators. Signed-off-by:
-
Marco Franchi authored
Boards based on imx6qdl have duplicate memory nodes: - One coming from the board device tree file: memory@ - One coming from the imx6qdl.dtsi file. Fix the duplication by removing the memory node from the imx6qdl.dtsi file and by adding 'device_type = "memory";' in the board Device Tree. Converted using the following command: perl -p0777i -e 's/memory\@10000000 \{\n/memory\@10000000 \{\n\t\tdevice_type = \"memory\";\n/m' `find ./arch/arm/boot/dts -name "imx6*"`` Reported-by:Rob Herring <robh@kernel.org> Signed-off-by:
Marco Franchi <marco.franchi@nxp.com> Reviewed-by:
-
Fabio Estevam authored
Add a memory node, with an empty memory size, which will be filled by the bootloader. This is done in preparation for removing the memory node from imx6qdl.dtsi. Reported-by:
-
Fabio Estevam authored
imx53-voipac-dmm-668 has two memory nodes, but the correct representation would be to use a single one with two reg entries - one for each RAM chip select, so fix it accordingly. Reported-by:
-
Fabio Estevam authored
On the vf610-zii-scu4-aib board there is a hi8435 (32-channel discrete-to-digital SPI sensor device) in the DSPI0 bus. Add support for it. Signed-off-by:
-
Anson Huang authored
Add egalax touch screen support on i2c2 bus, it is connected to LVDS0, while the existing one on i2c3 bus is connected to LVDS1. Signed-off-by:
-
Aisheng Dong authored
Add stop-mode property which is required by stop mode wakeup feature. Signed-off-by:
-
Aisheng Dong authored
Add stop-mode property which is required by stop mode wakeup feature. Signed-off-by:
-
Aisheng Dong authored
Add stop-mode property which is required by stop mode wakeup feature. Signed-off-by:
-
Aisheng Dong authored
Add stop-mode property which is required by stop mode wakeup feature. Signed-off-by:
-
Fabio Estevam authored
The imx6ul-pico-pi contains a imx6ul-pico SoM and a pi baseboard: https://www.technexion.com/products/pico-baseboards/detail/PICO-PI Add support for it. Signed-off-by:
Otavio Salvador <otavio@ossystems.com.br> Signed-off-by:
-
Fabio Estevam authored
This adds following peripherals support: - ADC - GPIO LED - GPIOs Signed-off-by:
-
Fabio Estevam authored
Use the same child led node and label name as used in the imx7d-pico-hobbit board. Signed-off-by:
-
Fabio Estevam authored
imx6ul-pico-hobbit board contains: - One SoM board (imx6ul pico) - One base board (hobbit). In order to make it easier for adding support for other board variants, move the commom SoM part to the imx6ul-pico.dtsi file. Signed-off-by:
-
Fabio Estevam authored
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by:
-
Peng Ma authored
add the qDMA device tree nodes for LS1021A devices. Signed-off-by:
Wen He <wen.he_1@nxp.com> Signed-off-by:
Peng Ma <peng.ma@nxp.com> Signed-off-by:
-
Fabio Estevam authored
Boards based on vf500/vf600 have duplicate memory nodes: - One coming from the board dts file: memory@ - One coming from the vf500.dtsi/vf610m4.dtsi files. Fix the duplication by removing the memory node from the dtsi file and by adding 'device_type = "memory";' in the board dts. Reported-by:
Stefan Agner <stefan@agner.ch> Signed-off-by:
-
Fabio Estevam authored
The GIC_CPU_MASK_SIMPLE() macro should take as its argument the actual number of CPU cores the interrupt controller is wired to. i.MX7S contains a single Cortex-A7, hence the second interrupt specifier cell for Private Peripheral Interrupts should use "GIC_CPU_MASK_SIMPLE(1)". Likewise, i.MX7D contains two Cortex-A7 cores, so it should use "GIC_CPU_MASK_SIMPLE(2)" instead. Tested on a imx7s-warp. Signed-off-by:
-
Fabio Estevam authored
The GIC_CPU_MASK_SIMPLE() macro should take as its argument the actual number of CPU cores the interrupt controller is wired to. i.MX6UL contains a single Cortex-A7, hence the second interrupt specifier cell for Private Peripheral Interrupts should use "GIC_CPU_MASK_SIMPLE(1)". Tested on a imx6ul-evk. Signed-off-by:
-
Fabio Estevam authored
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by:
-
Fabio Estevam authored
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by:
-
Aisheng Dong authored
The flexcan1 is pin conflict with fec. User would make flexcan1 enabled with fec disabled to use CAN. Signed-off-by:
-
Aisheng Dong authored
The CAN transceiver on MX6SX Sabreauto board seems in sleep mode by default after power up the board. User has to press the wakeup key on ARD baseboard before using the transceiver, or it may not work properly when power up the board at the first time(warm reset does not have such issue). This patch operates the wake pin too besides stby/en pins by chaining them together in regulator mode. Signed-off-by:
-
Aisheng Dong authored
CAN transceiver is different on RevA and RevB board. It's active high on RevA while active low on Rev B. Signed-off-by:
-
Patrick Havelange authored
The LS1021A has 8 possible PWMs, so adding them (disabled by default) Signed-off-by:
Patrick Havelange <patrick.havelange@essensium.com> Signed-off-by:
-
Alex Gonzalez authored
The ConnectCore 6UL SBC Pro has an AUO/Goodix LCD accessory kit that is connected on the LVDS interface through an on-board LVDS transceiver. This change adds support for the touch interface. Signed-off-by:
Alex Gonzalez <alex.gonzalez@digi.com> Reviewed-by:
-
Alex Gonzalez authored
This change adds support for the AUO G101EVN010 lcdif panel for the mxsfb DRM driver. Signed-off-by:
-
Fabio Estevam authored
Boards based on imx25 have duplicate memory nodes: - One coming from the board dts file: memory@ - One coming from the imx25.dtsi file. Fix the duplication by removing the memory node from the dtsi file and by adding 'device_type = "memory";' in the board dts. Reported-by:
-
Fabio Estevam authored
Boards based on imx27 have duplicate memory nodes: - One coming from the board dts file: memory@ - One coming from the imx27.dtsi file. Fix the duplication by removing the memory node from the dtsi file and by adding 'device_type = "memory";' in the board dts. Reported-by:
-
Fabio Estevam authored
Boards based on imx1 have duplicate memory nodes: - One coming from the board dts file: memory@ - One coming from the imx1.dtsi file. Fix the duplication by removing the memory node from the dtsi file and by adding 'device_type = "memory";' in the board dts. Reported-by:
-
Fabio Estevam authored
Boards based on imx28 have duplicate memory nodes: - One coming from the board dts file: memory@ - One coming from the imx28.dtsi file. Fix the duplication by removing the memory node from the dtsi file and by adding 'device_type = "memory";' in the board dts. Reported-by:
-
