- 11 Jan, 2013 15 commits
-
-
Alan Cox authored
commit cdc87c5a upstream. TEST_ALPHA() is broken and always returns 0. [akpm@linux-foundation.org: return false for '@' as well, per Bjorn] Signed-off-by:
Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Felix Fietkau authored
commit 78f18df4 upstream. ieee80211_free_txskb() needs to be used instead of dev_kfree_skb_any for tx packets passed to the driver from mac80211 Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Larry Finger authored
commit 576d28a7 upstream. Recent versions of udev cause synchronous firmware loading from the probe routine to fail because the request to user space times out. The original fix for b43legacy (commit a3ea2c76) moved the firmware load from the probe routine to a work queue, but it still used synchronous firmware loading. This method is OK when b43legacy is built as a module; however, it fails when the driver is compiled into the kernel. This version changes the code to load the initial firmware file using request_firmware_nowait(). A completion event is used to hold the work queue until that file is available. The remaining firmware files are read synchronously. Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Neal Cardwell authored
[ Upstream commit 5e1f5420 ] Add logic to verify that a port comparison byte code operation actually has the second inet_diag_bc_op from which we read the port for such operations. Previously the code blindly referenced op[1] without first checking whether a second inet_diag_bc_op struct could fit there. So a malicious user could make the kernel read 4 bytes beyond the end of the bytecode array by claiming to have a whole port comparison byte code (2 inet_diag_bc_op structs) when in fact the bytecode was not long enough to hold both. Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Neal Cardwell authored
[ Upstream commit f67caec9 ] Add logic to check the address family of the user-supplied conditional and the address family of the connection entry. We now do not do prefix matching of addresses from different address families (AF_INET vs AF_INET6), except for the previously existing support for having an IPv4 prefix match an IPv4-mapped IPv6 address (which this commit maintains as-is). This change is needed for two reasons: (1) The addresses are different lengths, so comparing a 128-bit IPv6 prefix match condition to a 32-bit IPv4 connection address can cause us to unwittingly walk off the end of the IPv4 address and read garbage or oops. (2) The IPv4 and IPv6 address spaces are semantically distinct, so a simple bit-wise comparison of the prefixes is not meaningful, and would lead to bogus results (except for the IPv4-mapped IPv6 case, which this commit maintains). Signed-off-by:
-
Neal Cardwell authored
[ Upstream commit 405c0059 ] Add logic to validate INET_DIAG_BC_S_COND and INET_DIAG_BC_D_COND operations. Previously we did not validate the inet_diag_hostcond, address family, address length, and prefix length. So a malicious user could make the kernel read beyond the end of the bytecode array by claiming to have a whole inet_diag_hostcond when the bytecode was not long enough to contain a whole inet_diag_hostcond of the given address family. Or they could make the kernel read up to about 27 bytes beyond the end of a connection address by passing a prefix length that exceeded the length of addresses of the given family. Signed-off-by:
-
Neal Cardwell authored
[ Upstream commit 1c95df85 ] Fix inet_diag to be aware of the fact that AF_INET6 TCP connections instantiated for IPv4 traffic and in the SYN-RECV state were actually created with inet_reqsk_alloc(), instead of inet6_reqsk_alloc(). This means that for such connections inet6_rsk(req) returns a pointer to a random spot in memory up to roughly 64KB beyond the end of the request_sock. With this bug, for a server using AF_INET6 TCP sockets and serving IPv4 traffic, an inet_diag user like `ss state SYN-RECV` would lead to inet_diag_fill_req() causing an oops or the export to user space of 16 bytes of kernel memory as a garbage IPv6 address, depending on where the garbage inet6_rsk(req) pointed. Signed-off-by:
-
Jay Purohit authored
[ Upstream commit af1b85e4 ] I noticed that the iPhone ethernet driver did not support iPhone 5. I quickly added support to it in my kernel, here's a patch. Signed-off-by:
Jay Purohit <jspurohit@velocitylimitless.com> Acked-by:
Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by:
Jan Ceuleers <jan.ceuleers@computer.org> Signed-off-by:
-
Johannes Berg authored
[ Upstream commit 1bf3751e ] ip_check_defrag() might be called from af_packet within the RX path where shared SKBs are used, so it must not modify the input SKB before it has unshared it for defragmentation. Use skb_copy_bits() to get the IP header and only pull in everything later. The same is true for the other caller in macvlan as it is called from dev->rx_handler which can also get a shared SKB. Reported-by:
Eric Leblond <eric@regit.org> Cc: stable@vger.kernel.org Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Alexander Shiyan authored
[ Upstream commit 2355a62b ] Signed-off-by:
Alexander Shiyan <shc_work@mail.ru> Signed-off-by:
-
Alan Cox authored
[ Upstream commit da9da01d ] Without this udev doesn't have a way to key the ne device to the platform device. Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Tommi Rantala authored
[ Upstream commit 6e51fe75 ] Consider the following program, that sets the second argument to the sendto() syscall incorrectly: #include <string.h> #include <arpa/inet.h> #include <sys/socket.h> int main(void) { int fd; struct sockaddr_in sa; fd = socket(AF_INET, SOCK_STREAM, 132 /*IPPROTO_SCTP*/); if (fd < 0) return 1; memset(&sa, 0, sizeof(sa)); sa.sin_family = AF_INET; sa.sin_addr.s_addr = inet_addr("127.0.0.1"); sa.sin_port = htons(11111); sendto(fd, NULL, 1, 0, (struct sockaddr *)&sa, sizeof(sa)); return 0; } We get -ENOMEM: $ strace -e sendto ./demo sendto(3, NULL, 1, 0, {sa_family=AF_INET, sin_port=htons(11111), sin_addr=inet_addr("127.0.0.1")}, 16) = -1 ENOMEM (Cannot allocate memory) Propagate the error code from sctp_user_addto_chunk(), so that we will tell user space what actually went wrong: $ strace -e sendto ./demo sendto(3, NULL, 1, 0, {sa_family=AF_INET, sin_port=htons(11111), sin_addr=inet_addr("127.0.0.1")}, 16) = -1 EFAULT (Bad address) Noticed while running Trinity (the syscall fuzzer). Signed-off-by:
Tommi Rantala <tt.rantala@gmail.com> Acked-by:
Vlad Yasevich <vyasevich@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Tommi Rantala authored
[ Upstream commit be364c8c ] Trinity (the syscall fuzzer) discovered a memory leak in SCTP, reproducible e.g. with the sendto() syscall by passing invalid user space pointer in the second argument: #include <string.h> #include <arpa/inet.h> #include <sys/socket.h> int main(void) { int fd; struct sockaddr_in sa; fd = socket(AF_INET, SOCK_STREAM, 132 /*IPPROTO_SCTP*/); if (fd < 0) return 1; memset(&sa, 0, sizeof(sa)); sa.sin_family = AF_INET; sa.sin_addr.s_addr = inet_addr("127.0.0.1"); sa.sin_port = htons(11111); sendto(fd, NULL, 1, 0, (struct sockaddr *)&sa, sizeof(sa)); return 0; } As far as I can tell, the leak has been around since ~2003. Signed-off-by:
-
nikolay@redhat.com authored
[ Upstream commit e196c0e5 ] Race between bonding_store_slaves_active() and slave manipulation functions. The bond_for_each_slave use in bonding_store_slaves_active() is not protected by any synchronization mechanism. NULL pointer dereference is easy to reach. Fixed by acquiring the bond->lock for the slave walk. v2: Make description text < 75 columns Signed-off-by:
Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by:
Jay Vosburgh <fubar@us.ibm.com> Signed-off-by:
-
Sarveshwar Bandi authored
[ Upstream commit 0e376bd0 ] Patch sets the lowest gso_max_size and gso_max_segs values of the slave devices during enslave and detach. Signed-off-by:
Sarveshwar Bandi <sarveshwar.bandi@emulex.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
- 17 Dec, 2012 25 commits
-
-
Greg Kroah-Hartman authored
-
Eric Dumazet authored
commit 878d7439 upstream. Commit 29c00b4a (rcu: Add event-tracing for RCU callback invocation) added a regression in rcu_do_batch() Under stress, RCU is supposed to allow to process all items in queue, instead of a batch of 10 items (blimit), but an integer overflow makes the effective limit being 1. So, unless there is frequent idle periods (during which RCU ignores batch limits), RCU can be forced into a state where it cannot keep up with the callback-generation rate, eventually resulting in OOM. This commit therefore converts a few variables in rcu_do_batch() from int to long to fix this problem, along with the module parameters controlling the batch limits. Signed-off-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by:
-
Zheng Liu authored
commit 12f8f74b upstream. Recently I build perf and get a build error on builtin-test.c. The error is as following: $ make CC perf.o CC builtin-test.o cc1: warnings being treated as errors builtin-test.c: In function ‘sched__get_first_possible_cpu’: builtin-test.c:977: warning: implicit declaration of function ‘CPU_ALLOC’ builtin-test.c:977: warning: nested extern declaration of ‘CPU_ALLOC’ builtin-test.c:977: warning: assignment makes pointer from integer without a cast builtin-test.c:978: warning: implicit declaration of function ‘CPU_ALLOC_SIZE’ builtin-test.c:978: warning: nested extern declaration of ‘CPU_ALLOC_SIZE’ builtin-test.c:979: warning: implicit declaration of function ‘CPU_ZERO_S’ builtin-test.c:979: warning: nested extern declaration of ‘CPU_ZERO_S’ builtin-test.c:982: warning: implicit declaration of function ‘CPU_FREE’ builtin-test.c:982: warning: nested extern declaration of ‘CPU_FREE’ builtin-test.c:992: warning: implicit declaration of function ‘CPU_ISSET_S’ builtin-test.c:992: warning: nested extern declaration of ‘CPU_ISSET_S’ builtin-test.c:998: warning: implicit declaration of function ‘CPU_CLR_S’ builtin-test.c:998: warning: nested extern declaration of ‘CPU_CLR_S’ make: *** [builtin-test.o] Error 1 This problem is introduced in 3e7c439a. CPU_ALLOC and related macros are missing in sched__get_first_possible_cpu function. In 54489c18, commiter mentioned that CPU_ALLOC has been removed. So CPU_ALLOC calls in this function are removed to let perf to be built. Signed-off-by:
Vinson Lee <vlee@twitter.com> Signed-off-by:
Zheng Liu <wenqing.lz@taobao.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Vinson Lee <vlee@twitter.com> Cc: Zheng Liu <wenqing.lz@taobao.com> Link: http://lkml.kernel.org/r/1352422726-31114-1-git-send-email-vlee@twitter.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Dan Williams authored
commit ba2d8ce9 upstream. Some devices (ex Nokia C7) simply don't respond at all when data is sent to some of their USB interfaces. The data gets stuck in the TTYs queue and sits there until close(2), which them blocks because closing_wait defaults to 30 seconds (even though the fd is O_NONBLOCK). This is rarely desired. Implement the standard mechanism to adjust closing_wait and let applications handle it how they want to. See also 02303f73 for usb_wwan.c. Signed-off-by:
Dan Williams <dcbw@redhat.com> Acked-by:
Oliver Neukum <oneukum@suse.de> Tested-by:
Aleksander Morgado <aleksander@gnu.org> Signed-off-by:
-
Dan Carpenter authored
commit 70f77b3f upstream. There is a typo here where '&' is used instead of '|' and it turns the statement into a noop. The original code is equivalent to: iter->flags &= ~((1 << 2) & (1 << 4)); Link: http://lkml.kernel.org/r/20120609161027.GD6488@elgon.mountainSigned-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Sarah Sharp authored
commit bba18e33 upstream. Ali reports that plugging a device into the Fresco Logic xHCI host with PCI device ID 1400 produces an IRQ error: do_IRQ: 3.176 No irq handler for vector (irq -1) Other early Fresco Logic host revisions don't support MSI, even though their PCI config space claims they do. Extend the quirk to disabling MSI to this chipset revision. Also enable the short transfer quirk, since it's likely this revision also has that quirk, and it should be harmless to enable. 04:00.0 0c03: 1b73:1400 (rev 01) (prog-if 30 [XHCI]) Subsystem: 1d5c:1000 Physical Slot: 3 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 51 Region 0: Memory at d4600000 (32-bit, non-prefetchable) [size=64K] Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [68] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000feeff00c Data: 41b1 Capabilities: [80] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <2us, L1 <32us ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 unlimited, L1 unlimited ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Kernel driver in use: xhci_hcd This patch should be backported to stable kernels as old as 2.6.36, that contain the commit f5182b41 "xhci: Disable MSI for some Fresco Logic hosts." Signed-off-by:
Sarah Sharp <sarah.a.sharp@linux.intel.com> Reported-by:
A Sh <smr.ash1991@gmail.com> Tested-by:
-
Alan Stern authored
commit 50ce5c06 upstream. This patch (as1636) is a partial workaround for a hardware bug affecting OHCI controllers by NVIDIA at least, maybe others too. When the controller retires a Transfer Descriptor, it is supposed to add the TD onto the Done Queue. But sometimes this doesn't happen, with the result that ohci-hcd never realizes the corresponding transfer has finished. Symptoms can vary; a typical result is that USB audio stops working after a while. The patch works around the problem by recognizing that TDs are always processed in order. Therefore, if a later TD is found on the Done Queue than all the earlier TDs for the same endpoint must be finished as well. Unfortunately this won't solve the problem in cases where the missing TD is the last one in the endpoint's queue. A complete fix would require a signficant amount of change to the driver. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Tested-by:
-
Zhang Rui authored
commit 129ff8f8 upstream. Or else the laptop will boot with a dimmed screen. References: https://bugzilla.kernel.org/show_bug.cgi?id=51141Tested-by:
Stefan Nagy <public@stefan-nagy.at> Signed-off-by:
Zhang Rui <rui.zhang@intel.com> Signed-off-by:
-
Rafael J. Wysocki authored
commit a6b5e88c upstream. During resume from system suspend the 'data' field of struct pnp_dev in pnpacpi_set_resources() may be a stale pointer, due to removal of the associated ACPI device node object in the previous suspend-resume cycle. This happens, for example, if a dockable machine is booted in the docking station and then suspended and resumed and suspended again. If that happens, pnpacpi_build_resource_template() called from pnpacpi_set_resources() attempts to use that pointer and crashes. However, pnpacpi_set_resources() actually checks the device's ACPI handle, attempts to find the ACPI device node object attached to it and returns an error code if that fails, so in fact it knows what the correct value of dev->data should be. Use this observation to update dev->data with the correct value if necessary and dump a call trace if that's the case (once). We still need to fix the root cause of this issue, but preventing systems from crashing because of it is an improvement too. Reported-and-tested-by:
Zdenek Kabelac <zdenek.kabelac@gmail.com> References: https://bugzilla.kernel.org/show_bug.cgi?id=51071Signed-off-by:
-
Lan Tianyu authored
commit 876ab790 upstream. Sony Vaio VPCEB1S1E does not resume correctly without acpi_sleep=nonvs, so add it to the ACPI sleep blacklist. References: https://bugzilla.kernel.org/show_bug.cgi?id=48781Reported-by:
Sébastien Wilmet <swilmet@gnome.org> Signed-off-by:
Lan Tianyu <tianyu.lan@intel.com> Signed-off-by:
-
Kamil Iskra authored
commit 4000e626 upstream. Add a quirk to correctly report battery capacity on 2010 and 2011 Lenovo Thinkpad models. The affected models that I tested (x201, t410, t410s, and x220) exhibit a problem where, when battery capacity reporting unit is mAh, the values being reported are wrong. Pre-2010 and 2012 models appear to always report in mWh and are thus unaffected. Also, in mid-2012 Lenovo issued a BIOS update for the 2011 models that fixes the issue (tested on x220 with a post-1.29 BIOS). No such update is available for the 2010 models, so those still need this patch. Problem description: for some reason, the affected Thinkpads switch the reporting unit between mAh and mWh; generally, mAh is used when a laptop is plugged in and mWh when it's unplugged, although a suspend/resume or rmmod/modprobe is needed for the switch to take effect. The values reported in mAh are *always* wrong. This does not appear to be a kernel regression; I believe that the values were never reported correctly. I tested back to kernel 2.6.34, with multiple machines and BIOS versions. Simply plugging a laptop into mains before turning it on is enough to reproduce the problem. Here's a sample /proc/acpi/battery/BAT0/info from Thinkpad x220 (before a BIOS update) with a 4-cell battery: present: yes design capacity: 2886 mAh last full capacity: 2909 mAh battery technology: rechargeable design voltage: 14800 mV design capacity warning: 145 mAh design capacity low: 13 mAh cycle count: 0 capacity granularity 1: 1 mAh capacity granularity 2: 1 mAh model number: 42T4899 serial number: 21064 battery type: LION OEM info: SANYO Once the laptop switches the unit to mWh (unplug from mains, suspend, resume), the output changes to: present: yes design capacity: 28860 mWh last full capacity: 29090 mWh battery technology: rechargeable design voltage: 14800 mV design capacity warning: 1454 mWh design capacity low: 200 mWh cycle count: 0 capacity granularity 1: 1 mWh capacity granularity 2: 1 mWh model number: 42T4899 serial number: 21064 battery type: LION OEM info: SANYO Can you see how the values for "design capacity", etc., differ by a factor of 10 instead of 14.8 (the design voltage of this battery)? On the battery itself it says: 14.8V, 1.95Ah, 29Wh, so clearly the values reported in mWh are correct and the ones in mAh are not. My guess is that this problem has been around ever since those machines were released, but because the most common Thinkpad batteries are rated at 10.8V, the error (8%) is small enough that it simply hasn't been noticed or at least nobody could be bothered to look into it. My patch works around the problem by adjusting the incorrectly reported mAh values by "10000 / design_voltage". The patch also has code to figure out if it should be activated or not. It only activates on Lenovo Thinkpads, only when the unit is mAh, and, as an extra precaution, only when the battery capacity reported through ACPI does not match what is reported through DMI (I've never encountered a machine where the first two conditions would be true but the last would not, but better safe than sorry). I've been using this patch for close to a year on several systems without any problems. References: https://bugzilla.kernel.org/show_bug.cgi?id=41062Acked-by:
Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by:
-
Greg Kroah-Hartman authored
commit fb37ef98 upstream. As reported https://bugzilla.kernel.org/show_bug.cgi?id=51031, the UAS driver causes problems and has been asked to be not built into any of the major distributions. To prevent users from running into problems with it, and for distros that were not notified, just mark the whole thing as broken. Acked-by:
-
Markus Becker authored
commit 356fe44f upstream. Signed-off-by:
Markus Becker <mab@comnets.uni-bremen.de> Signed-off-by:
-
Peter Korsgaard authored
commit 1a88d5ee upstream. BeagleBone A5+ devices ended up getting shipped with the 'BeagleBone/XDS100V2' product string, and not XDS100 like it was agreed, so adjust the quirk to match. For details, see the thread on the beagle list: https://groups.google.com/forum/#!msg/beagleboard/zrFPew9_Wvo/ibWr1-eE8JwJSigned-off-by:
Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by:
-
Martin Teichmann authored
commit d7e14b37 upstream. The Newport AGILIS model AG-UC8 compact piezo motor controller (http://search.newport.com/?q=*&x2=sku&q2=AG-UC8) is yet another device using an FTDI USB-to-serial chip. It works fine with the ftdi_sio driver when adding options ftdi-sio product=0x3000 vendor=0x104d to modprobe.d. udevadm reports "Newport" as the manufacturer, and "Agilis" as the product name. Signed-off-by:
Martin Teichmann <lkb.teichmann@gmail.com> Signed-off-by:
-
Bjørn Mork authored
commit f36446cf upstream. The Huawei E173 will normally appear as 12d1:1436 in Linux. But the modem has another mode with different device ID and a slightly different set of descriptors. This is the mode used by Windows like this: 3Modem: USB\VID_12D1&PID_140C&MI_00\6&3A1D2012&0&0000 Networkcard: USB\VID_12D1&PID_140C&MI_01\6&3A1D2012&0&0001 Appli.Inter: USB\VID_12D1&PID_140C&MI_02\6&3A1D2012&0&0002 PC UI Inter: USB\VID_12D1&PID_140C&MI_03\6&3A1D2012&0&0003 All interfaces have the same ff/ff/ff class codes in this mode. Blacklisting the network interface to allow it to be picked up by the network driver. Reported-by:
Thomas Schäfer <tschaefer@t-online.de> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
li.rui27@zte.com.cn authored
commit 31b6a104 upstream. Signed-off-by:
Rui li <li.rui27@zte.com.cn> Signed-off-by:
-
Jan Beulich authored
commit 6acf5a8c upstream. HPET_TN_FSB is not a proper mask bit; it merely toggles between MSI and legacy interrupt delivery. The proper mask bit is HPET_TN_ENABLE, so use both bits when (un)masking the interrupt. Signed-off-by:
Jan Beulich <jbeulich@suse.com> Link: http://lkml.kernel.org/r/5093E09002000078000A60E6@nat28.tlf.novell.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Dan Carpenter authored
[Not needed in 3.8 or newer as this driver is removed there. - gregkh] We get this from user space and nothing has been done to ensure that these strings are NUL terminated. Reported-by:
Chen Gang <gang.chen@asianux.com> Signed-off-by:
-
Boris Ostrovsky authored
commit 22e32f4f upstream. Add family 16h PCI ID to AMD's power driver to allow it report power consumption on these processors. Signed-off-by:
Boris Ostrovsky <boris.ostrovsky@amd.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Marek Szyprowski authored
commit 387870f2 upstream. dmapool always calls dma_alloc_coherent() with GFP_ATOMIC flag, regardless the flags provided by the caller. This causes excessive pruning of emergency memory pools without any good reason. Additionaly, on ARM architecture any driver which is using dmapools will sooner or later trigger the following error: "ERROR: 256 KiB atomic DMA coherent pool is too small! Please increase it with coherent_pool= kernel parameter!". Increasing the coherent pool size usually doesn't help much and only delays such error, because all GFP_ATOMIC DMA allocations are always served from the special, very limited memory pool. This patch changes the dmapool code to correctly use gfp flags provided by the dmapool caller. Reported-by:
Soeren Moch <smoch@web.de> Reported-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Tested-by:
Andrew Lunn <andrew@lunn.ch> Tested-by:
-
Jani Nikula authored
commit 9a30a61f upstream. commit 500a8cc4 Author: Zhenyu Wang <zhenyuw@linux.intel.com> Date: Wed Jan 13 11:19:52 2010 +0800 drm/i915: parse eDP panel color depth from VBT block originally introduced parsing bpp for eDP from VBT, with a default of 18 bpp if the eDP BIOS data block is not present. Turns out that default seems to break the Macbook Pro with retina display, as noted in commit 4344b813 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Fri Aug 10 11:10:20 2012 +0200 drm/i915: ignore eDP bpc settings from vbt Since we can't ignore bpc settings from VBT completely after all, get rid of the default. Do not clamp eDP to 18 bpp by default if the eDP BDB is missing from VBT. Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Tested-by:
Henrik Rydberg <rydberg@euromail.se> [danvet: paste in the updated commit message from irc.] Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Jani Nikula authored
commit 2f4f649a upstream. There are laptops out there that need the eDP bpc from VBT. This is effectively a revert of commit 4344b813 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Fri Aug 10 11:10:20 2012 +0200 drm/i915: ignore eDP bpc settings from vbt but putting the VBT check after the EDID check to see them both in dmesg if this clamps more than the EDID. We have enough history with bpc clamping to warrant the extra debug info. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=47641 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=56401Signed-off-by:
-
Tejun Heo authored
commit fc4b514f upstream. 8852aac2 ("workqueue: mod_delayed_work_on() shouldn't queue timer on 0 delay") unexpectedly uncovered a very nasty abuse of delayed_work in megaraid - it allocated work_struct, casted it to delayed_work and then pass that into queue_delayed_work(). Previously, this was okay because 0 @delay short-circuited to queue_work() before doing anything with delayed_work. 8852aac2 moved 0 @delay test into __queue_delayed_work() after sanity check on delayed_work making megaraid trigger BUG_ON(). Although megaraid is already fixed by c1d390d8 ("megaraid: fix BUG_ON() from incorrect use of delayed work"), this patch converts BUG_ON()s in __queue_delayed_work() to WARN_ON_ONCE()s so that such abusers, if there are more, trigger warning but don't crash the machine. Signed-off-by:
Tejun Heo <tj@kernel.org> Cc: Xiaotian Feng <xtfeng@gmail.com> Signed-off-by:
Shuah Khan <shuah.khan@hp.com> Signed-off-by:
-
Peter Ujfalusi authored
commit 961a7aea upstream. soc-dmaengine-pcm library need to be part of the snd-soc-core in order to be able to compile ASoC as modules when dmaengine is enabled on the platform. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by:
-
