- 22 Jun, 2022 4 commits
-
-
Mark Pearson authored
By default the ACPI platform profile starts in balanced mode. On supported systems AMT is supposed to be enabled in balanced mode by default. When checking the capabilities during initialization, set up AMT to be enabled if it's supported. Co-developed-by:
Mario Limonciello <mario.limonciello@amd.com> Signed-off-by:
Mark Pearson <markpearson@lenovo.com> Link: https://lore.kernel.org/r/20220603170212.164963-4-markpearson@lenovo.comReviewed-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Mark Pearson authored
On some AMD platforms if you press FN+T it will toggle whether automatic mode transitions are active. Recognize this keycode and use it to toggle AMT. Co-developed-by:
-
Mark Pearson authored
Some AMD Thinkpads support automatic mode transitions. The actual transition logic doesn't live in the `thinkpad_acpi` driver. The events to activate this logic come from this driver though. Populate these events when switching PSC power modes. Co-developed-by:
-
Mark Pearson authored
Currently the active mode (PSC/MMC) is stored in an enum and queried throughout the driver. Other driver changes will enumerate additional submodes that are relevant to be tracked, so instead track PSC/MMC in a single integer variable. Co-developed-by:
-
- 13 Jun, 2022 12 commits
-
-
Maximilian Luz authored
Add support for the detachable keyboard cover on the Surface Pro 8. The keyboard cover on the Surface Pro 8 is, unlike the keyboard covers of earlier Surface Pro generations, handled via the Surface System Aggregator Module (SSAM). The keyboard and touchpad (as well as other HID input devices) of this cover are standard SSAM HID client devices (just like keyboard and touchpad on e.g. the Surface Laptop 3 and 4), however, some care needs to be taken as they can be physically detached (similarly to the Surface Book 3). Specifically, the respective SSAM client devices need to be removed when the keyboard cover has been detached and (re-)initialized when the keyboard cover has been (re-)attached. On the Surface Pro 8, detachment of the keyboard cover (and by extension its devices) is managed via the KIP subsystem. Therefore, said devices need to be registered under the KIP device hub, which in turn will remove and re-create/re-initialize those devices as needed. Signed-off-by:
Maximilian Luz <luzmaximilian@gmail.com> Link: https://lore.kernel.org/r/20220527023447.2460025-13-luzmaximilian@gmail.comReviewed-by:
-
Maximilian Luz authored
Add a Surface System Aggregator Module (SSAM) client device hub for hot-removable devices managed via the KIP subsystem. The KIP subsystem (full name unknown, abbreviation has been obtained through reverse engineering) is a subsystem that manages hot-removable SSAM client devices. Specifically, it manages HID input devices contained in the detachable keyboard cover of the Surface Pro 8 and Surface Pro X. The KIP subsystem handles a single group of devices (e.g. all devices contained in the keyboard cover) and cannot handle devices individually. Thus we model it as a client device hub, which (hot-)removes all devices contained under it once removal of the hub (e.g. keyboard cover) has been detected and (re-)adds all devices once the physical hub device has been (re-)attached. To do this, use the previously generified SSAM subsystem hub framework. Signed-off-by:
-
Maximilian Luz authored
Use the target category of the (base) hub as instance id in the (virtual) hub device UID. This makes association of the hub with the respective subsystem easier. Signed-off-by:
-
Maximilian Luz authored
The Surface System Aggregator Module (SSAM) has multiple subsystems that can manage detachable devices. At the moment, we only support the "base" (BAS/0x11) subsystem, which is used on the Surface Book 3 to manage devices (including keyboard, touchpad, and secondary battery) connected to the base of the device. The Surface Pro 8 has a new type-cover with keyboard and touchpad, which is managed via the KIP/0x0e subsystem. The general procedure is the same, but with slightly different events and setup. To make implementation of the KIP hub easier and prevent duplication, generify the parts of the base hub that we can use for the KIP hub (or any potential future subsystem hubs). This also switches over to use the newly introduced "hot-remove" functionality, which should prevent communication issues when devices have been detached. Lastly, also drop the undocumented and unused sysfs "state" attribute of the base hub. It has at best been useful for debugging. Signed-off-by:
-
Maximilian Luz authored
The KIP subsystem (full name unknown, abbreviation has been obtained through reverse engineering) handles detachable peripherals such as the keyboard cover on the Surface Pro X and Surface Pro 8. It is currently not entirely clear what this subsystem entails, but at the very least it provides event notifications for when the keyboard cover on the Surface Pro X and Surface Pro 8 have been detached or re-attached, as well as the state that the keyboard cover is currently in (e.g. folded-back, folded laptop-like, closed, etc.). Signed-off-by:
-
Maximilian Luz authored
Add support for hot-removal of SSAM HID client devices. Once a device has been hot-removed, further communication with it should be avoided as it may fail and time out. While the device will be removed as soon as we detect hot-removal, communication may still occur during teardown, especially when unregistering notifiers. While hot-removal is a surprise event that can happen at any time, try to avoid communication as much as possible once it has been detected to prevent timeouts that can slow down device removal and cause issues, e.g. when quickly re-attaching the device. Signed-off-by:
-
Maximilian Luz authored
Use newly introduced client device wrapper functions for notifier registration and unregistration. Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20220527023447.2460025-7-luzmaximilian@gmail.comReviewed-by:
-
Maximilian Luz authored
Use newly introduced client device wrapper functions for notifier registration and unregistration. Signed-off-by:
-
Maximilian Luz authored
Use newly introduced client device wrapper functions for notifier registration and unregistration. Signed-off-by:
-
Maximilian Luz authored
When SSAM client devices have been (physically) hot-removed, communication attempts with those devices may fail and time out. This can even extend to event notifiers, due to which timeouts may occur during device removal, slowing down that process. Add a parameter to the notifier unregister function that allows skipping communication with the EC to prevent this. Furthermore, add wrappers for registering and unregistering notifiers belonging to SSAM client devices that automatically check if the device has been marked as hot-removed and communication should be avoided. Note that non-SSAM client devices can generally not be hot-removed, so also add a convenience wrapper for those, defaulting to allow communication. Signed-off-by:
-
Maximilian Luz authored
Some SSAM devices, notably the keyboard cover (keyboard and touchpad) on the Surface Pro 8, can be hot-removed. When this occurs, communication with the device may fail and time out. This timeout can unnecessarily block and slow down device removal and even cause issues when the devices are detached and re-attached quickly. Thus, communication should generally be avoided once hot-removal is detected. While we already remove a device as soon as we detect its (hot-)removal, the corresponding device driver may still attempt to communicate with the device during teardown. This is especially critical as communication failure may also extend to disabling of events, which is typically done at that stage. Add a flag to allow marking devices as hot-removed. This can then be used during client driver teardown to check if any communication attempts should be avoided. Signed-off-by:
-
Maximilian Luz authored
platform/surface: aggregator: Allow is_ssam_device() to be used when CONFIG_SURFACE_AGGREGATOR_BUS is disabled In SSAM subsystem drivers that handle both ACPI and SSAM-native client devices, we may want to check whether we have a SSAM (native) client device. Further, we may want to do this even when instantiation thereof cannot happen due to CONFIG_SURFACE_AGGREGATOR_BUS=n. Currently, doing so causes an error due to an undefined reference error due to ssam_device_type being placed in the bus source unit. Therefore, if CONFIG_SURFACE_AGGREGATOR_BUS is not defined, simply let is_ssam_device() return false to prevent this error. Signed-off-by:
-
- 12 Jun, 2022 5 commits
-
-
Haowen Bai authored
Eliminate direct accesses to the driver_data field. Signed-off-by:
Haowen Bai <baihaowen@meizu.com> Link: https://lore.kernel.org/r/1653989063-20180-1-git-send-email-baihaowen@meizu.comReviewed-by:
-
Hans de Goede authored
The def_bool y PMC_ATOM Kconfig option provides a couple of symbols used by the code enabled by the X86_INTEL_LPSS option and it registers some clocks. These clocks are only registered on Bay Trail, Cherry Trail and Brasswell Intel SoCs and kernels targeting these SoCs must always have the X86_INTEL_LPSS option enabled otherwise many things will not work. Building the PMC_ATOM code on kernels which are not targeting the mentioned SoCs and which do not have the X86_INTEL_LPSS enabled is not useful. This means that we can simplify things by replacing the PMC_ATOM Kconfig option in Makefiles with X86_INTEL_LPSS and then drop the option. Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by:
Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20220503140207.101218-2-hdegoede@redhat.com
-
Duke Lee authored
The Surface Go reports Chassis Type 9 (Laptop,) so the device needs to be added to dmi_vgbs_allow_list to enable tablet mode when an attached Type Cover is folded back. BugLink: https://github.com/linux-surface/linux-surface/issues/837Signed-off-by:
Duke Lee <krnhotwings@gmail.com> Reviewed-by:
-
Bedant Patnaik authored
commit be9d73e6 ("platform/x86: hp-wmi: Fix 0x05 error code reported by several WMI calls") and commit 12b19f14 ("platform/x86: hp-wmi: Fix hp_wmi_read_int() reporting error (0x05)") cause ACPI BIOS Error (bug): Attempt to CreateField of length zero (20211217/dsopcode-133) because of the ACPI method HWMC, which unconditionally creates a Field of size (insize*8) bits: CreateField (Arg1, 0x80, (Local5 * 0x08), DAIN) In cases where args->insize = 0, the Field size is 0, resulting in an error. Fix this by using zero insize only if 0x5 error code is returned Tested on Omen 15 AMD (2020) board ID: 8786. Fixes: be9d73e6 ("platform/x86: hp-wmi: Fix 0x05 error code reported by several WMI calls") Signed-off-by:
Bedant Patnaik <bedant.patnaik@gmail.com> Tested-by:
Jorge Lopez <jorge.lopez2@hp.com> Link: https://lore.kernel.org/r/41be46743d21c78741232a47bbb5f1cdbcc3d21e.camel@gmail.comReviewed-by:
-
Jorge Lopez authored
WMI queries fail on some devices where the ACPI method HWMC unconditionally attempts to create Fields beyond the buffer if the buffer is too small, this breaks essential features such as power profiles: CreateByteField (Arg1, 0x10, D008) CreateByteField (Arg1, 0x11, D009) CreateByteField (Arg1, 0x12, D010) CreateDWordField (Arg1, 0x10, D032) CreateField (Arg1, 0x80, 0x0400, D128) In cases where args->data had zero length, ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [D008] at bit offset/length 128/8 exceeds size of target Buffer (128 bits) (20211217/dsopcode-198) was obtained. ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [D009] at bit offset/length 136/8 exceeds size of target Buffer (136bits) (20211217/dsopcode-198) The original code created a buffer size of 128 bytes regardless if the WMI call required a smaller buffer or not. This particular behavior occurs in older BIOS and reproduced in OMEN laptops. Newer BIOS handles buffer sizes properly and meets the latest specification requirements. This is the reason why testing with a dynamically allocated buffer did not uncover any failures with the test systems at hand. This patch was tested on several OMEN, Elite, and Zbooks. It was confirmed the patch resolves HPWMI_FAN GET/SET calls in an OMEN Laptop 15-ek0xxx. No problems were reported when testing on several Elite and Zbooks notebooks. Fixes: 4b4967cb ("platform/x86: hp-wmi: Changing bios_args.data to be dynamically allocated") Signed-off-by:
-
- 10 Jun, 2022 7 commits
-
-
August Wikerfors authored
Tested and works on my system. Signed-off-by:
August Wikerfors <git@augustwikerfors.se> Link: https://lore.kernel.org/r/20220608212028.28307-1-git@augustwikerfors.seSigned-off-by:
-
Piotr Chmura authored
Add dmi_system_id of Gigabyte Z690M AORUS ELITE AX DDR4 board. Tested on my PC. Signed-off-by:
Piotr Chmura <chmooreck@gmail.com> Link: https://lore.kernel.org/r/bd83567e-ebf5-0b31-074b-5f6dc7f7c147@gmail.comSigned-off-by:
-
Jiasheng Jiang authored
As platform_driver_register() could fail, it should be better to deal with the return value in order to maintain the code consisitency. Fixes: 86af1d02 ("platform/x86: Support for EC-connected GPIOs for identify LED/button on Barco P50 board") Signed-off-by:
Jiasheng Jiang <jiasheng@iscas.ac.cn> Acked-by:
Peter Korsgaard <peter.korsgaard@barco.com> Link: https://lore.kernel.org/r/20220526090345.1444172-1-jiasheng@iscas.ac.cnSigned-off-by:
-
George D Sworo authored
Add Raptorlake P to the list of the platforms that intel_pmc_core driver supports for pmc_core device. Raptorlake P PCH is based on Alderlake P PCH. Signed-off-by:
George D Sworo <george.d.sworo@intel.com> Reviewed-by:
David E. Box <david.e.box@linux.intel.com> Link: https://lore.kernel.org/r/20220602012617.20100-1-george.d.sworo@intel.comSigned-off-by:
-
David Arcari authored
The probe function pmt_crashlog_probe() may incorrectly reference the 'priv->entry array' as it uses 'i' to reference the array instead of 'priv->num_entries' as it should. This is similar to the problem that was addressed in pmt_telemetry_probe via commit 2cdfa0c2 ("platform/x86/intel: Fix 'rmmod pmt_telemetry' panic"). Cc: "David E. Box" <david.e.box@linux.intel.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Mark Gross <markgross@kernel.org> Cc: linux-kernel@vger.kernel.org Signed-off-by:
David Arcari <darcari@redhat.com> Reviewed-by:
-
Michael Shych authored
Fix problem of missing static in struct declaration. Fixes: 662f2482 ("platform/mellanox: Add support for new SN2201 system") Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Michael Shych <michaelsh@nvidia.com> Link: https://lore.kernel.org/r/20220602145103.11859-1-michaelsh@nvidia.comSigned-off-by:
-
Geert Uytterhoeven authored
Fix a misspelling of the word "platform". Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Acked-by:
-
- 06 Jun, 2022 3 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull file descriptor fix from Al Viro: "Fix for breakage in #work.fd this window" * tag 'pull-work.fd-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fix the breakage in close_fd_get_file() calling conventions change
-
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mmLinus Torvalds authored
Pull mm hotfixes from Andrew Morton: "Fixups for various recently-added and longer-term issues and a few minor tweaks: - fixes for material merged during this merge window - cc:stable fixes for more longstanding issues - minor mailmap and MAINTAINERS updates" * tag 'mm-hotfixes-stable-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: mm/oom_kill.c: fix vm_oom_kill_table[] ifdeffery x86/kexec: fix memory leak of elf header buffer mm/memremap: fix missing call to untrack_pfn() in pagemap_range() mm: page_isolation: use compound_nr() correctly in isolate_single_pageblock() mm: hugetlb_vmemmap: fix CONFIG_HUGETLB_PAGE_FREE_VMEMMAP_DEFAULT_ON MAINTAINERS: add maintainer information for z3fold mailmap: update Josh Poimboeuf's email
-
- 05 Jun, 2022 9 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mmLinus Torvalds authored
Pull delay-accounting update from Andrew Morton: "A single featurette for delay accounting. Delayed a bit because, unusually, it had dependencies on both the mm-stable and mm-nonmm-stable queues" * tag 'mm-nonmm-stable-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: delayacct: track delays from write-protect copy
-
Linus Torvalds authored
The bluetooth code uses our bitmap infrastructure for the two bits (!) of connection setup flags, and in the process causes odd problems when it converts between a bitmap and just the regular values of said bits. It's completely pointless to do things like bitmap_to_arr32() to convert a bitmap into a u32. It shoudln't have been a bitmap in the first place. The reason to use bitmaps is if you have arbitrary number of bits you want to manage (not two!), or if you rely on the atomicity guarantees of the bitmap setting and clearing. The code could use an "atomic_t" and use "atomic_or/andnot()" to set and clear the bit values, but considering that it then copies the bitmaps around with "bitmap_to_arr32()" and friends, there clearly cannot be a lot of atomicity requirements. So just use a regular integer. In the process, this avoids the warnings about erroneous use of bitmap_from_u64() which were triggered on 32-bit architectures when conversion from a u64 would access two words (and, surprise, surprise, only one word is needed - and indeed overkill - for a 2-bit bitmap). That was always problematic, but the compiler seems to notice it and warn about the invalid pattern only after commit 0a97953f ("lib: add bitmap_{from,to}_arr64") changed the exact implementation details of 'bitmap_from_u64()', as reported by Sudip Mukherjee and Stephen Rothwell. Fixes: fe92ee64 ("Bluetooth: hci_core: Rework hci_conn_params flags") Link: https://lore.kernel.org/all/YpyJ9qTNHJzz0FHY@debian/ Link: https://lore.kernel.org/all/20220606080631.0c3014f2@canb.auug.org.au/ Link: https://lore.kernel.org/all/20220605162537.1604762-1-yury.norov@gmail.com/Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Reported-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Reviewed-by:
Yury Norov <yury.norov@gmail.com> Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Cc: Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Al Viro authored
It used to grab an extra reference to struct file rather than just transferring to caller the one it had removed from descriptor table. New variant doesn't, and callers need to be adjusted. Reported-and-tested-by: syzbot+47dd250f527cb7bebf24@syzkaller.appspotmail.com Fixes: 6319194e ("Unify the primitives for file descriptor closing") Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 SGX fix from Thomas Gleixner: "A single fix for x86/SGX to prevent that memory which is allocated for an SGX enclave is accounted to the wrong memory control group" * tag 'x86-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/sgx: Set active memcg prior to shmem allocation
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 mm cleanup from Thomas Gleixner: "Use PAGE_ALIGNED() instead of open coding it in the x86/mm code" * tag 'x86-mm-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Use PAGE_ALIGNED(x) instead of IS_ALIGNED(x, PAGE_SIZE)
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 microcode updates from Thomas Gleixner: - Disable late microcode loading by default. Unless the HW people get their act together and provide a required minimum version in the microcode header for making a halfways informed decision its just lottery and broken. - Warn and taint the kernel when microcode is loaded late - Remove the old unused microcode loader interface - Remove a redundant perf callback from the microcode loader * tag 'x86-microcode-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/microcode: Remove unnecessary perf callback x86/microcode: Taint and warn on late loading x86/microcode: Default-disable late loading x86/microcode: Rip out the OLD_INTERFACE
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 cleanups from Thomas Gleixner: "A set of small x86 cleanups: - Remove unused headers in the IDT code - Kconfig indendation and comment fixes - Fix all 'the the' typos in one go instead of waiting for bots to fix one at a time" * tag 'x86-cleanups-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Fix all occurences of the "the the" typo x86/idt: Remove unused headers x86/Kconfig: Fix indentation of arch/x86/Kconfig.debug x86/Kconfig: Fix indentation and add endif comments to arch/x86/Kconfig -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 boot update from Thomas Gleixner: "Use strlcpy() instead of strscpy() in arch_setup()" * tag 'x86-boot-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/setup: Use strscpy() to replace deprecated strlcpy()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull clockevent/clocksource updates from Thomas Gleixner: - Device tree bindings for MT8186 - Tell the kernel that the RISC-V SBI timer stops in deeper power states - Make device tree parsing in sp804 more robust - Dead code removal and tiny fixes here and there - Add the missing SPDX identifiers * tag 'timers-core-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/oxnas-rps: Fix irq_of_parse_and_map() return value clocksource/drivers/timer-ti-dm: Remove unnecessary NULL check clocksource/drivers/timer-sun5i: Convert to SPDX identifier clocksource/drivers/timer-sun4i: Convert to SPDX identifier clocksource/drivers/pistachio: Convert to SPDX identifier clocksource/drivers/orion: Convert to SPDX identifier clocksource/drivers/lpc32xx: Convert to SPDX identifier clocksource/drivers/digicolor: Convert to SPDX identifier clocksource/drivers/armada-370-xp: Convert to SPDX identifier clocksource/drivers/mips-gic-timer: Convert to SPDX identifier clocksource/drivers/jcore: Convert to SPDX identifier clocksource/drivers/bcm_kona: Convert to SPDX identifier clocksource/drivers/sp804: Avoid error on multiple instances clocksource/drivers/riscv: Events are stopped during CPU suspend clocksource/drivers/ixp4xx: Drop boardfile probe path dt-bindings: timer: Add compatible for Mediatek MT8186
-
