- 01 Oct, 2012 39 commits
-
-
Trond Myklebust authored
The current spaghetti code confuses some versions of gcc (and just looks ugly as hell)! Clean up... Signed-off-by:Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
nfs_callback_tcpport is now per-net_namespace. Signed-off-by: -
Trond Myklebust authored
-
Daniel Walter authored
[nfs] replace strict_str* with kstr* variants * replace string conversions with newer kstr* functions Signed-off-by:
Daniel Walter <sahne@0x90.at> Signed-off-by:
-
Yanchuan Nian authored
There are some unnecessary semicolons in function find_nfs_version. Just remove them. Signed-off-by:
Yanchuan Nian <ycnian@gmail.com> Signed-off-by:
-
Wei Yongjun authored
Using list_move_tail() instead of list_del() + list_add_tail(). spatch with a semantic match is used to found this problem. (http://coccinelle.lip6.fr/) Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
-
Peng Tao authored
For DIO writes, if it is not blocksize aligned, we need to do internal serialization. It may slow down writers anyway. So we just bail them out and resend to MDS. Cc: stable <stable@vger.kernel.org> [since v3.4] Signed-off-by:
Peng Tao <tao.peng@emc.com> Signed-off-by:
-
Peng Tao authored
For DIO read, if it is not sector aligned, we should reject it and resend via MDS. Otherwise there might be data corruption. Also teach bl_read_pagelist to handle partial page reads for DIO. Cc: stable <stable@vger.kernel.org> [since v3.4] Signed-off-by:
-
Peng Tao authored
If applications use flock to protect its write range, generic NFS will not do read-modify-write cycle at page cache level. Therefore LD should know how to handle non-sector aligned writes. Otherwise there will be data corruption. Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Peng Tao authored
This reverts commit 159e0561, in favor of a more complete fix to the alignment issue. Signed-off-by:
-
Peng Tao authored
After commit e38eb650 (NFS: set_pnfs_layoutdriver() from nfs4_proc_fsinfo()), set_pnfs_layoutdriver() is called inside nfs4_proc_fsinfo(), but pnfs_blksize is not set. It causes setting blocklayoutdriver failure and pnfsblock mount failure. Cc: stable <stable@vger.kernel.org> [since v3.5] Signed-off-by:
-
Peng Tao authored
pnfs_within_mdsthreshold() is called inside pg_init. We need to set read_io/write_io before that. Otherwise we fail pnfs_within_mdsthreshold() and IO goes to MDS. A simple test case: dd if=foo of=/mnt/pnfs/bar bs=10M count=1 oflag=direct Signed-off-by:
-
Chuck Lever authored
An optional boot parameter is introduced to allow client administrators to specify a string that the Linux NFS client can insert into its nfs_client_id4 id string, to make it both more globally unique, and to ensure that it doesn't change even if the client's nodename changes. If this boot parameter is not specified, the client's nodename is used, as before. Client installation procedures can create a unique string (typically, a UUID) which remains unchanged during the lifetime of that client instance. This works just like creating a UUID for the label of the system's root and boot volumes. Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
-
Chuck Lever authored
"Server trunking" is a fancy named for a multi-homed NFS server. Trunking might occur if a client sends NFS requests for a single workload to multiple network interfaces on the same server. There are some implications for NFSv4 state management that make it useful for a client to know if a single NFSv4 server instance is multi-homed. (Note this is only a consideration for NFSv4, not for legacy versions of NFS, which are stateless). If a client cares about server trunking, no NFSv4 operations can proceed until that client determines who it is talking to. Thus server IP trunking discovery must be done when the client first encounters an unfamiliar server IP address. The nfs_get_client() function walks the nfs_client_list and matches on server IP address. The outcome of that walk tells us immediately if we have an unfamiliar server IP address. It invokes nfs_init_client() in this case. Thus, nfs4_init_client() is a good spot to perform trunking discovery. Discovery requires a client to establish a fresh client ID, so our client will now send SETCLIENTID or EXCHANGE_ID as the first NFS operation after a successful ping, rather than waiting for an application to perform an operation that requires NFSv4 state. The exact process for detecting trunking is different for NFSv4.0 and NFSv4.1, so a minorversion-specific init_client callout method is introduced. CLID_INUSE recovery is important for the trunking discovery process. CLID_INUSE is a sign the server recognizes the client's nfs_client_id4 id string, but the client is using the wrong principal this time for the SETCLIENTID operation. The SETCLIENTID must be retried with a series of different principals until one works, and then the rest of trunking discovery can proceed. Signed-off-by:
-
Chuck Lever authored
Currently, when identifying itself to NFS servers, the Linux NFS client uses a unique nfs_client_id4.id string for each server IP address it talks with. For example, when client A talks to server X, the client identifies itself using a string like "AX". The requirements for these strings are specified in detail by RFC 3530 (and bis). This form of client identification presents a problem for Transparent State Migration. When client A's state on server X is migrated to server Y, it continues to be associated with string "AX." But, according to the rules of client string construction above, client A will present string "AY" when communicating with server Y. Server Y thus has no way to know that client A should be associated with the state migrated from server X. "AX" is all but abandoned, interfering with establishing fresh state for client A on server Y. To support transparent state migration, then, NFSv4.0 clients must instead use the same nfs_client_id4.id string to identify themselves to every NFS server; something like "A". Now a client identifies itself as "A" to server X. When a file system on server X transitions to server Y, and client A identifies itself as "A" to server Y, Y will know immediately that the state associated with "A," whether it is native or migrated, is owned by the client, and can merge both into a single lease. As a pre-requisite to adding support for NFSv4 migration to the Linux NFS client, this patch changes the way Linux identifies itself to NFS servers via the SETCLIENTID (NFSv4 minor version 0) and EXCHANGE_ID (NFSv4 minor version 1) operations. In addition to removing the server's IP address from nfs_client_id4, the Linux NFS client will also no longer use its own source IP address as part of the nfs_client_id4 string. On multi-homed clients, the value of this address depends on the address family and network routing used to contact the server, thus it can be different for each server. Signed-off-by:
-
Chuck Lever authored
Currently, the Linux client uses a unique nfs_client_id4.id string when identifying itself to distinct NFS servers. To support transparent state migration, the Linux client will have to use the same nfs_client_id4 string for all servers it communicates with (also known as the "uniform client string" approach). Otherwise NFS servers can not recognize that open and lock state need to be merged after a file system transition. Unfortunately, there are some NFSv4.0 servers currently in the field that do not tolerate the uniform client string approach. Thus, by default, our NFSv4.0 mounts will continue to use the current approach, and we introduce a mount option that switches them to use the uniform model. Client administrators must identify which servers can be mounted with this option. Eventually most NFSv4.0 servers will be able to handle the uniform approach, and we can change the default. The first mount of a server controls the behavior for all subsequent mounts for the lifetime of that set of mounts of that server. After the last mount of that server is gone, the client erases the data structure that tracks the lease. A subsequent lease may then honor a different "migration" setting. This patch adds only the infrastructure for parsing the new mount option. Support for uniform client strings is added in a subsequent patch. Signed-off-by:
-
Chuck Lever authored
An ULP is supposed to be able to replace a GSS rpc_auth object with another GSS rpc_auth object using rpcauth_create(). However, rpcauth_create() in 3.5 reliably fails with -EEXIST in this case. This is because when gss_create() attempts to create the upcall pipes, sometimes they are already there. For example if a pipe FS mount event occurs, or a previous GSS flavor was in use for this rpc_clnt. It turns out that's not the only problem here. While working on a fix for the above problem, we noticed that replacing an rpc_clnt's rpc_auth is not safe, since dereferencing the cl_auth field is not protected in any way. So we're deprecating the ability of rpcauth_create() to switch an rpc_clnt's security flavor during normal operation. Instead, let's add a fresh API that clones an rpc_clnt and gives the clone a new flavor before it's used. This makes immediate use of the new __rpc_clone_client() helper. This can be used in a similar fashion to rpcauth_create() when a client is hunting for the correct security flavor. Instead of replacing an rpc_clnt's security flavor in a loop, the ULP replaces the whole rpc_clnt. To fix the -EEXIST problem, any ULP logic that relies on replacing an rpc_clnt's rpc_auth with rpcauth_create() must be changed to use this API instead. Signed-off-by:
-
Chuck Lever authored
rpc_clone_client() does most of the same tasks as rpc_new_client(), so there is an opportunity for code re-use. Create a generic helper that makes it easy to clone an RPC client while replacing any of the clnt's parameters. Signed-off-by:
-
Chuck Lever authored
Clean up: Some function names have changed, but debugging messages were never updated. Automate the construction of the function name in debugging messages. Signed-off-by:
-
Chuck Lever authored
Clean up: The blank space in front of the message must be spaces. Tabs show up on the console as a graphical character. Signed-off-by:
-
Chuck Lever authored
If the state manager thread is not actually able to fully recover from some situation, it wakes up waiters, who kick off a new state manager thread. Quite often the fresh invocation of the state manager is just as successful. This results in a livelock as the client dumps thousands of NFS requests a second on the network in a vain attempt to recover. Not very friendly. To mitigate this situation, add a delay in the state manager after an unhandled error, so that the client sends just a few requests every second in this case. Signed-off-by:
-
Chuck Lever authored
fs/nfs/super.c: In function ‘nfs_compare_remount_data’: fs/nfs/super.c:2042:18: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] fs/nfs/super.c:2043:18: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] fs/nfs/super.c:2044:20: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] fs/nfs/super.c:2046:21: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] fs/nfs/super.c:2047:21: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] fs/nfs/super.c:2048:21: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] fs/nfs/super.c:2049:21: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] fs/nfs/super.c:2050:18: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] Seen with gcc (GCC) 4.6.3 20120306 (Red Hat 4.6.3-2). Signed-off-by: -
Stanislav Kinsbursky authored
NSM RPC client can be required on NFSv3 umount, when child reaper is dying (and destroying it's mount namespace). It means, that current nsproxy is set to NULL already, but creation of RPC client requires UTS namespace for gaining hostname string. This patch creates reference-counted per-net NSM client on first monitor request and destroys it after last unmonitor request. Signed-off-by:
Stanislav Kinsbursky <skinsbursky@parallels.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Stanislav Kinsbursky authored
Taking hostname from uts namespace if not safe, because this cuold be performind during umount operation on child reaper death. And in this case current->nsproxy is NULL already. Signed-off-by:
-
Stanislav Kinsbursky authored
NSM RPC client can be required on NFSv3 umount, when child reaper is dying (and destroying it's mount namespace). It means, that current nsproxy is set to NULL already, but creation of RPC client requires UTS namespace for gaining hostname string. This patch introduces reference counted NFS RPC clients creation and destruction helpers (similar to RPCBIND RPC clients). Signed-off-by:
-
Stanislav Kinsbursky authored
Signed-off-by:
-
Stanislav Kinsbursky authored
This patch also introduces refcount-aware nfs_callback_down_net() wrapper for svc_shutdown_net(). Signed-off-by:
-
Stanislav Kinsbursky authored
Signed-off-by:
-
Stanislav Kinsbursky authored
Signed-off-by:
-
Stanislav Kinsbursky authored
Usage coutner now increased only is the service was started sccessfully. Even if service is running already, then goto is not required anymore, because service creation and start will be skipped. With this patch code looks clearer. Signed-off-by:
-
Stanislav Kinsbursky authored
This is just a code move, which from my POW makes code looks better. I.e. now on start we have 3 different stages: 1) Service creation. 2) Service per-net data allocation. 3) Service start. Patch also renames goto label "out_err:" into "err_start:" to reflect new changes. Signed-off-by:
-
Stanislav Kinsbursky authored
No need to assign transports backchannel server explicitly in nfs41_callback_up() - there is nfs_callback_bc_serv() function for this. By using it, nfs4_callback_up() and nfs41_callback_up() can be called without transport argument. Note: service have to be passed to nfs_callback_bc_serv() instead of callback, since callback link can be uninitialized. Signed-off-by:
-
Stanislav Kinsbursky authored
v4: 1) Callback transport creation routine selection by version simlified. This new function in now called before nfs_minorversion_callback_svc_setup()). Also few small changes: 1) current network namespace in nfs_callback_up() was replaced by transport net. 2) svc_shutdown_net() was moved prior to callback usage counter decrement (because in case of per-net data allocation faulure svc_shutdown_net() have to be skipped). Signed-off-by:
-
Stanislav Kinsbursky authored
This function creates service if it's not exist, or increase usage counter of the existent, and returns pointer to it. Usage counter will be droppepd by svc_destroy() later in nfs_callback_up(). Signed-off-by:
-
Stanislav Kinsbursky authored
Signed-off-by:
-
Weston Andros Adamson authored
The OPEN operation has no way to differentiate an open for read and an open for execution - both look like read to the server. This allowed users to read files that didn't have READ access but did have EXEC access, which is obviously wrong. This patch adds an ACCESS call to the OPEN compound to handle the difference between OPENs for reading and execution. Since we're going through the trouble of calling ACCESS, we check all possible access bits and cache the results hopefully avoiding an ACCESS call in the future. Signed-off-by:
Weston Andros Adamson <dros@netapp.com> Signed-off-by:
-
Bryan Schumaker authored
This will allocate memory that has already been zeroed, allowing us to remove the memset later on. Signed-off-by:
Bryan Schumaker <bjchuma@netapp.com> Signed-off-by:
-
Bryan Schumaker authored
I put the client into an open recovery loop by: Client: Open file read half Server: Expire client (echo 0 > /sys/kernel/debug/nfsd/forget_clients) Client: Drop vm cache (echo 3 > /proc/sys/vm/drop_caches) finish reading file This causes a loop because the client never updates the nfs4_state after discovering that the delegation is invalid. This means it will keep trying to read using the bad delegation rather than attempting to re-open the file. Signed-off-by:
Bryan Schumaker <bjschuma@netapp.com> CC: stable@vger.kernel.org [3.4+] Signed-off-by:
-
Bryan Schumaker authored
If we are reading through a delegation, and the delegation is OK then state->stateid will still point to a delegation stateid and not an open stateid. Signed-off-by:
-
- 29 Sep, 2012 1 commit
-
-
Trond Myklebust authored
We shouldn't need more than 1 worker thread per cpu, since rpciod is designed to run without sleeping in most cases. Signed-off-by:
-
