- 03 Aug, 2022 31 commits
-
-
Jan Kara authored
Nobody uses mb_cache_entry_delete() anymore. Remove it. Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220712105436.32204-9-jack@suse.czSigned-off-by: Theodore Ts'o <tytso@mit.edu>
-
Jan Kara authored
Currently when we decide to reuse xattr block we detect the case when the last reference to xattr block is being dropped at the same time and cancel the reuse attempt. Convert ext2 to a new scheme when as soon as matching mbcache entry is found, we wait with dropping the last xattr block reference until mbcache entry reference is dropped (meaning either the xattr block reference is increased or we decided not to reuse the block). Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220712105436.32204-8-jack@suse.czSigned-off-by: Theodore Ts'o <tytso@mit.edu>
-
Jan Kara authored
Replace one else in ext2_xattr_set() with a goto. This makes following code changes simpler to follow. No functional changes. Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com> Link: https://lore.kernel.org/r/20220712105436.32204-7-jack@suse.czSigned-off-by: Theodore Ts'o <tytso@mit.edu>
-
Jan Kara authored
Free of xattr block reference is opencode in two places. Factor it out into a separate function and use it. Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220712105436.32204-6-jack@suse.czSigned-off-by: Theodore Ts'o <tytso@mit.edu>
-
Jan Kara authored
When ext4_xattr_block_set() decides to remove xattr block the following race can happen: CPU1 CPU2 ext4_xattr_block_set() ext4_xattr_release_block() new_bh = ext4_xattr_block_cache_find() lock_buffer(bh); ref = le32_to_cpu(BHDR(bh)->h_refcount); if (ref == 1) { ... mb_cache_entry_delete(); unlock_buffer(bh); ext4_free_blocks(); ... ext4_forget(..., bh, ...); jbd2_journal_revoke(..., bh); ext4_journal_get_write_access(..., new_bh, ...) do_get_write_access() jbd2_journal_cancel_revoke(..., new_bh); Later the code in ext4_xattr_block_set() finds out the block got freed and cancels reusal of the block but the revoke stays canceled and so in case of block reuse and journal replay the filesystem can get corrupted. If the race works out slightly differently, we can also hit assertions in the jbd2 code. Fix the problem by making sure that once matching mbcache entry is found, code dropping the last xattr block reference (or trying to modify xattr block in place) waits until the mbcache entry reference is dropped. This way code trying to reuse xattr block is protected from someone trying to drop the last reference to xattr block. Reported-and-tested-by: Ritesh Harjani <ritesh.list@gmail.com> CC: stable@vger.kernel.org Fixes: 82939d79 ("ext4: convert to mbcache2") Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220712105436.32204-5-jack@suse.czSigned-off-by: Theodore Ts'o <tytso@mit.edu>
-
Jan Kara authored
Remove unnecessary else (and thus indentation level) from a code block in ext4_xattr_block_set(). It will also make following code changes easier. No functional changes. CC: stable@vger.kernel.org Fixes: 82939d79 ("ext4: convert to mbcache2") Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220712105436.32204-4-jack@suse.czSigned-off-by: Theodore Ts'o <tytso@mit.edu>
-
Jan Kara authored
Currently we remove EA inode from mbcache as soon as its xattr refcount drops to zero. However there can be pending attempts to reuse the inode and thus refcount handling code has to handle the situation when refcount increases from zero anyway. So save some work and just keep EA inode in mbcache until it is getting evicted. At that moment we are sure following iget() of EA inode will fail anyway (or wait for eviction to finish and load things from the disk again) and so removing mbcache entry at that moment is fine and simplifies the code a bit. CC: stable@vger.kernel.org Fixes: 82939d79 ("ext4: convert to mbcache2") Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220712105436.32204-3-jack@suse.czSigned-off-by: Theodore Ts'o <tytso@mit.edu>
-
Jan Kara authored
Add function mb_cache_entry_delete_or_get() to delete mbcache entry if it is unused and also add a function to wait for entry to become unused - mb_cache_entry_wait_unused(). We do not share code between the two deleting function as one of them will go away soon. CC: stable@vger.kernel.org Fixes: 82939d79 ("ext4: convert to mbcache2") Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220712105436.32204-2-jack@suse.czSigned-off-by: Theodore Ts'o <tytso@mit.edu>
-
Jan Kara authored
Do not reclaim entries that are currently used by somebody from a shrinker. Firstly, these entries are likely useful. Secondly, we will need to keep such entries to protect pending increment of xattr block refcount. CC: stable@vger.kernel.org Fixes: 82939d79 ("ext4: convert to mbcache2") Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220712105436.32204-1-jack@suse.czSigned-off-by: Theodore Ts'o <tytso@mit.edu>
-
Lukas Czerner authored
ext4_append() must always allocate a new block, otherwise we run the risk of overwriting existing directory block corrupting the directory tree in the process resulting in all manner of problems later on. Add a sanity check to see if the logical block is already allocated and error out if it is. Cc: stable@kernel.org Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Link: https://lore.kernel.org/r/20220704142721.157985-2-lczerner@redhat.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>
-
Lukas Czerner authored
Currently ext4 directory handling code implicitly assumes that the directory blocks are always within the i_size. In fact ext4_append() will attempt to allocate next directory block based solely on i_size and the i_size is then appropriately increased after a successful allocation. However, for this to work it requires i_size to be correct. If, for any reason, the directory inode i_size is corrupted in a way that the directory tree refers to a valid directory block past i_size, we could end up corrupting parts of the directory tree structure by overwriting already used directory blocks when modifying the directory. Fix it by catching the corruption early in __ext4_read_dirblock(). Addresses Red-Hat-Bugzilla: #2070205 CVE: CVE-2022-1184 Signed-off-by: Lukas Czerner <lczerner@redhat.com> Cc: stable@vger.kernel.org Reviewed-by: Andreas Dilger <adilger@dilger.ca> Link: https://lore.kernel.org/r/20220704142721.157985-1-lczerner@redhat.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>
-
Ojaswin Mujoo authored
Add support to display the mb_optimize_scan value in /proc/fs/ext4/<dev>/options file. The option is only displayed when the value is non default. Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com> Link: https://lore.kernel.org/r/20220704054603.21462-1-ojaswin@linux.ibm.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>
-
Ye Bin authored
Now if check directoy entry is corrupted, ext4_empty_dir may return true then directory will be removed when file system mounted with "errors=continue". In order not to make things worse just return false when directory is corrupted. Signed-off-by: Ye Bin <yebin10@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220622090223.682234-1-yebin10@huawei.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>
-
Jiang Jian authored
The '*' in the comment is not aligned. Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com> Link: https://lore.kernel.org/r/20220621061531.19669-1-jiangjian@cdjrlc.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>
-
Bagas Sanjaya authored
Commit 3103084a ("ext4, doc: remove unnecessary escaping") removes redundant underscore escaping, however the cell spacing in heading row of blockmap table became not aligned anymore, hence triggers malformed table warning: Documentation/filesystems/ext4/blockmap.rst:3: WARNING: Malformed table. +---------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+ | i.i_block Offset | Where It Points | <snipped>... The warning caused the table not being loaded. Realign the heading row cell by adding missing space at the first cell to fix the warning. Fixes: 3103084a ("ext4, doc: remove unnecessary escaping") Cc: stable@kernel.org Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Wang Jianjian <wangjianjian3@huawei.com> Cc: linux-ext4@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com> Link: https://lore.kernel.org/r/20220619072938.7334-1-bagasdotme@gmail.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>
-
Li Lingfeng authored
When migrating to extents, the checksum seed of temporary inode need to be replaced by inode's, otherwise the inode checksums will be incorrect when swapping the inodes data. However, the temporary inode can not match it's checksum to itself since it has lost it's own checksum seed. mkfs.ext4 -F /dev/sdc mount /dev/sdc /mnt/sdc xfs_io -fc "pwrite 4k 4k" -c "fsync" /mnt/sdc/testfile chattr -e /mnt/sdc/testfile chattr +e /mnt/sdc/testfile umount /dev/sdc fsck -fn /dev/sdc ======== ... Pass 1: Checking inodes, blocks, and sizes Inode 13 passes checks, but checksum does not match inode. Fix? no ... ======== The fix is simple, save the checksum seed of temporary inode, and recover it after migrating to extents. Fixes: e81c9302 ("ext4: set csum seed in tmp inode while migrating to extents") Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220617062515.2113438-1-lilingfeng3@huawei.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>
-
Ye Bin authored
We got issue as follows: ------------[ cut here ]------------ WARNING: CPU: 3 PID: 9310 at fs/ext4/inode.c:3441 ext4_iomap_begin+0x182/0x5d0 RIP: 0010:ext4_iomap_begin+0x182/0x5d0 RSP: 0018:ffff88812460fa08 EFLAGS: 00010293 RAX: ffff88811f168000 RBX: 0000000000000000 RCX: ffffffff97793c12 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003 RBP: ffff88812c669160 R08: ffff88811f168000 R09: ffffed10258cd20f R10: ffff88812c669077 R11: ffffed10258cd20e R12: 0000000000000001 R13: 00000000000000a4 R14: 000000000000000c R15: ffff88812c6691ee FS: 00007fd0d6ff3740(0000) GS:ffff8883af180000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fd0d6dda290 CR3: 0000000104a62000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: iomap_apply+0x119/0x570 iomap_bmap+0x124/0x150 ext4_bmap+0x14f/0x250 bmap+0x55/0x80 do_vfs_ioctl+0x952/0xbd0 __x64_sys_ioctl+0xc6/0x170 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Above issue may happen as follows: bmap write bmap ext4_bmap iomap_bmap ext4_iomap_begin ext4_file_write_iter ext4_buffered_write_iter generic_perform_write ext4_da_write_begin ext4_da_write_inline_data_begin ext4_prepare_inline_data ext4_create_inline_data ext4_set_inode_flag(inode, EXT4_INODE_INLINE_DATA); if (WARN_ON_ONCE(ext4_has_inline_data(inode))) ->trigger bug_on To solved above issue hold inode lock in ext4_bamp. Signed-off-by: Ye Bin <yebin10@huawei.com> Link: https://lore.kernel.org/r/20220617013935.397596-1-yebin10@huawei.comSigned-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org
-
Baokun Li authored
Use the EXT4_INODE_HAS_XATTR_SPACE macro to more accurately determine whether the inode have xattr space. Cc: stable@kernel.org Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220616021358.2504451-5-libaokun1@huawei.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>
-
Baokun Li authored
If the ext4 inode does not have xattr space, 0 is returned in the get_max_inline_xattr_value_size function. Otherwise, the function returns a negative value when the inode does not contain EXT4_STATE_XATTR. Cc: stable@kernel.org Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220616021358.2504451-4-libaokun1@huawei.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>
-
Baokun Li authored
Hulk Robot reported a issue: ================================================================== BUG: KASAN: use-after-free in ext4_xattr_set_entry+0x18ab/0x3500 Write of size 4105 at addr ffff8881675ef5f4 by task syz-executor.0/7092 CPU: 1 PID: 7092 Comm: syz-executor.0 Not tainted 4.19.90-dirty #17 Call Trace: [...] memcpy+0x34/0x50 mm/kasan/kasan.c:303 ext4_xattr_set_entry+0x18ab/0x3500 fs/ext4/xattr.c:1747 ext4_xattr_ibody_inline_set+0x86/0x2a0 fs/ext4/xattr.c:2205 ext4_xattr_set_handle+0x940/0x1300 fs/ext4/xattr.c:2386 ext4_xattr_set+0x1da/0x300 fs/ext4/xattr.c:2498 __vfs_setxattr+0x112/0x170 fs/xattr.c:149 __vfs_setxattr_noperm+0x11b/0x2a0 fs/xattr.c:180 __vfs_setxattr_locked+0x17b/0x250 fs/xattr.c:238 vfs_setxattr+0xed/0x270 fs/xattr.c:255 setxattr+0x235/0x330 fs/xattr.c:520 path_setxattr+0x176/0x190 fs/xattr.c:539 __do_sys_lsetxattr fs/xattr.c:561 [inline] __se_sys_lsetxattr fs/xattr.c:557 [inline] __x64_sys_lsetxattr+0xc2/0x160 fs/xattr.c:557 do_syscall_64+0xdf/0x530 arch/x86/entry/common.c:298 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x459fe9 RSP: 002b:00007fa5e54b4c08 EFLAGS: 00000246 ORIG_RAX: 00000000000000bd RAX: ffffffffffffffda RBX: 000000000051bf60 RCX: 0000000000459fe9 RDX: 00000000200003c0 RSI: 0000000020000180 RDI: 0000000020000140 RBP: 000000000051bf60 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000001009 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffc73c93fc0 R14: 000000000051bf60 R15: 00007fa5e54b4d80 [...] ================================================================== Above issue may happen as follows: ------------------------------------- ext4_xattr_set ext4_xattr_set_handle ext4_xattr_ibody_find >> s->end < s->base >> no EXT4_STATE_XATTR >> xattr_check_inode is not executed ext4_xattr_ibody_set ext4_xattr_set_entry >> size_t min_offs = s->end - s->base >> UAF in memcpy we can easily reproduce this problem with the following commands: mkfs.ext4 -F /dev/sda mount -o debug_want_extra_isize=128 /dev/sda /mnt touch /mnt/file setfattr -n user.cat -v `seq -s z 4096|tr -d '[:digit:]'` /mnt/file In ext4_xattr_ibody_find, we have the following assignment logic: header = IHDR(inode, raw_inode) = raw_inode + EXT4_GOOD_OLD_INODE_SIZE + i_extra_isize is->s.base = IFIRST(header) = header + sizeof(struct ext4_xattr_ibody_header) is->s.end = raw_inode + s_inode_size In ext4_xattr_set_entry min_offs = s->end - s->base = s_inode_size - EXT4_GOOD_OLD_INODE_SIZE - i_extra_isize - sizeof(struct ext4_xattr_ibody_header) last = s->first free = min_offs - ((void *)last - s->base) - sizeof(__u32) = s_inode_size - EXT4_GOOD_OLD_INODE_SIZE - i_extra_isize - sizeof(struct ext4_xattr_ibody_header) - sizeof(__u32) In the calculation formula, all values except s_inode_size and i_extra_size are fixed values. When i_extra_size is the maximum value s_inode_size - EXT4_GOOD_OLD_INODE_SIZE, min_offs is -4 and free is -8. The value overflows. As a result, the preceding issue is triggered when memcpy is executed. Therefore, when finding xattr or setting xattr, check whether there is space for storing xattr in the inode to resolve this issue. Cc: stable@kernel.org Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220616021358.2504451-3-libaokun1@huawei.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>
-
Baokun Li authored
When adding an xattr to an inode, we must ensure that the inode_size is not less than EXT4_GOOD_OLD_INODE_SIZE + extra_isize + pad. Otherwise, the end position may be greater than the start position, resulting in UAF. Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com> Link: https://lore.kernel.org/r/20220616021358.2504451-2-libaokun1@huawei.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>
-
Eric Whitney authored
A race can occur in the unlikely event ext4 is unable to allocate a physical cluster for a delayed allocation in a bigalloc file system during writeback. Failure to allocate a cluster forces error recovery that includes a call to mpage_release_unused_pages(). That function removes any corresponding delayed allocated blocks from the extent status tree. If a new delayed write is in progress on the same cluster simultaneously, resulting in the addition of an new extent containing one or more blocks in that cluster to the extent status tree, delayed block accounting can be thrown off if that delayed write then encounters a similar cluster allocation failure during future writeback. Write lock the i_data_sem in mpage_release_unused_pages() to fix this problem. Ext4's block/cluster accounting code for bigalloc relies on i_data_sem for mutual exclusion, as is found in the delayed write path, and the locking in mpage_release_unused_pages() is missing. Cc: stable@kernel.org Reported-by: Ye Bin <yebin10@huawei.com> Signed-off-by: Eric Whitney <enwlinux@gmail.com> Link: https://lore.kernel.org/r/20220615160530.1928801-1-enwlinux@gmail.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>
-
Zhang Yi authored
We catch an assert problem in jbd2_journal_commit_transaction() when doing fsstress and request falut injection tests. The problem is happened in a race condition between jbd2_journal_commit_transaction() and ext4_end_io_end(). Firstly, ext4_writepages() writeback dirty pages and start reserved handle, and then the journal was aborted due to some previous metadata IO error, jbd2_journal_abort() start to commit current running transaction, the committing procedure could be raced by ext4_end_io_end() and lead to subtract j_reserved_credits twice from commit_transaction->t_outstanding_credits, finally the t_outstanding_credits is mistakenly smaller than t_nr_buffers and trigger assert. kjournald2 kworker jbd2_journal_commit_transaction() write_unlock(&journal->j_state_lock); atomic_sub(j_reserved_credits, t_outstanding_credits); //sub once jbd2_journal_start_reserved() start_this_handle() //detect aborted journal jbd2_journal_free_reserved() //get running transaction read_lock(&journal->j_state_lock) __jbd2_journal_unreserve_handle() atomic_sub(j_reserved_credits, t_outstanding_credits); //sub again read_unlock(&journal->j_state_lock); journal->j_running_transaction = NULL; J_ASSERT(t_nr_buffers <= t_outstanding_credits) //bomb!!! Fix this issue by using journal->j_state_lock to protect the subtraction in jbd2_journal_commit_transaction(). Fixes: 96f1e097 ("jbd2: avoid long hold times of j_state_lock while committing a transaction") Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220611130426.2013258-1-yi.zhang@huawei.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>
-
Jan Kara authored
jbd2_log_start_commit() is not used outside of jbd2 so unexport it. Also make __jbd2_log_start_commit() static when we are at it. Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Lukas Czerner <lczerner@redhat.com> Link: https://lore.kernel.org/r/20220608112355.4397-4-jack@suse.czSigned-off-by: Theodore Ts'o <tytso@mit.edu>
-
Jan Kara authored
Jbd2 exports jbd2_journal_enable_debug and __jbd2_debug() depite the first is used only in fs/jbd2/journal.c and the second only within jbd2 code. Remove the pointless exports make jbd2_journal_enable_debug static. Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Lukas Czerner <lczerner@redhat.com> Link: https://lore.kernel.org/r/20220608112355.4397-3-jack@suse.czSigned-off-by: Theodore Ts'o <tytso@mit.edu>
-
Jan Kara authored
The name of jbd_debug() is confusing as all functions inside jbd2 have jbd2_ prefix. Rename jbd_debug() to jbd2_debug(). No functional changes. Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Lukas Czerner <lczerner@redhat.com> Link: https://lore.kernel.org/r/20220608112355.4397-2-jack@suse.czSigned-off-by: Theodore Ts'o <tytso@mit.edu>
-
Jan Kara authored
We use jbd_debug() in some places in ext4. It seems a bit strange to use jbd2 debugging output function for ext4 code. Also these days ext4_debug() uses dynamic printk so each debug message can be enabled / disabled on its own so the time when it made some sense to have these combined (to allow easier common selecting of messages to report) has passed. Just convert all jbd_debug() uses in ext4 to ext4_debug(). Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Lukas Czerner <lczerner@redhat.com> Link: https://lore.kernel.org/r/20220608112355.4397-1-jack@suse.czSigned-off-by: Theodore Ts'o <tytso@mit.edu>
-
hanjinke authored
After each buddy split, mb_mark_used will search the proper order for the block which may consume some loop in mb_find_order_for_block. In fact, we can reuse the order and buddy generated by the buddy split. Reviewed by: lei.rao@intel.com Signed-off-by: hanjinke <hanjinke.666@bytedance.com> Link: https://lore.kernel.org/r/20220606155305.74146-1-hanjinke.666@bytedance.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>
-
Theodore Ts'o authored
When the EXT4_IOC_RESIZE_FS ioctl is complete, update the backup superblocks. We don't do this for the old-style resize ioctls since they are quite ancient, and only used by very old versions of resize2fs --- and we don't want to update the backup superblocks every time EXT4_IOC_GROUP_ADD is called, since it might get called a lot. Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Link: https://lore.kernel.org/r/20220629040026.112371-2-tytso@mit.eduSigned-off-by: Theodore Ts'o <tytso@mit.edu>
-
Theodore Ts'o authored
When doing an online resize, the on-disk superblock on-disk wasn't updated. This means that when the file system is unmounted and remounted, and the on-disk overhead value is non-zero, this would result in the results of statfs(2) to be incorrect. This was partially fixed by Commits 10b01ee9 ("ext4: fix overhead calculation to account for the reserved gdt blocks"), 85d825db ("ext4: force overhead calculation if the s_overhead_cluster makes no sense"), and eb705421 ("ext4: update the cached overhead value in the superblock"). However, since it was too expensive to forcibly recalculate the overhead for bigalloc file systems at every mount, this didn't fix the problem for bigalloc file systems. This commit should address the problem when resizing file systems with the bigalloc feature enabled. Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Reviewed-by: Andreas Dilger <adilger@dilger.ca> Link: https://lore.kernel.org/r/20220629040026.112371-1-tytso@mit.eduSigned-off-by: Theodore Ts'o <tytso@mit.edu>
-
Zhang Yi authored
Since commit 6493792d ("ext4: convert symlink external data block mapping to bdev"), create new symlink with inline_data is not supported, but it missing to handle the leftover inlined symlinks, which could cause below error message and fail to read symlink. ls: cannot read symbolic link 'foo': Structure needs cleaning EXT4-fs error (device sda): ext4_map_blocks:605: inode #12: block 2021161080: comm ls: lblock 0 mapped to illegal pblock 2021161080 (length 1) Fix this regression by adding ext4_read_inline_link(), which read the inline data directly and convert it through a kmalloced buffer. Fixes: 6493792d ("ext4: convert symlink external data block mapping to bdev") Cc: stable@kernel.org Reported-by: Torge Matthies <openglfreak@googlemail.com> Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Tested-by: Torge Matthies <openglfreak@googlemail.com> Link: https://lore.kernel.org/r/20220630090100.2769490-1-yi.zhang@huawei.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>
-
- 03 Jul, 2022 4 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Looking at the conditional lock acquire functions in the kernel due to the new sparse support (see commit 4a557a5d "sparse: introduce conditional lock acquire function attribute"), it became obvious that the lockref code has a couple of them, but they don't match the usual naming convention for the other ones, and their return value logic is also reversed. In the other very similar places, the naming pattern is '*_and_lock()' (eg 'atomic_put_and_lock()' and 'refcount_dec_and_lock()'), and the function returns true when the lock is taken. The lockref code is superficially very similar to the refcount code, only with the special "atomic wrt the embedded lock" semantics. But instead of the '*_and_lock()' naming it uses '*_or_lock()'. And instead of returning true in case it took the lock, it returns true if it *didn't* take the lock. Now, arguably the reflock code is quite logical: it really is a "either decrement _or_ lock" kind of situation - and the return value is about whether the operation succeeded without any special care needed. So despite the similarities, the differences do make some sense, and maybe it's not worth trying to unify the different conditional locking primitives in this area. But while looking at this all, it did become obvious that the 'lockref_get_or_lock()' function hasn't actually had any users for almost a decade. The only user it ever had was the shortlived 'd_rcu_to_refcount()' function, and it got removed and replaced with 'lockref_get_not_dead()' back in 2013 in commits 0d98439e ("vfs: use lockred 'dead' flag to mark unrecoverably dead dentries") and e5c832d5 ("vfs: fix dentry RCU to refcounting possibly sleeping dput()") In fact, that single use was removed less than a week after the whole function was introduced in commit b3abd802 ("lockref: add 'lockref_get_or_lock() helper") so this function has been around for a decade, but only had a user for six days. Let's just put this mis-designed and unused function out of its misery. We can think about the naming and semantic oddities of the remaining 'lockref_put_or_lock()' later, but at least that function has users. And while the naming is different and the return value doesn't match, that function matches the whole '{atomic,refcount}_dec_and_test()' pattern much better (ie the magic happens when the count goes down to zero, not when it is incremented from zero). Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
The kernel tends to try to avoid conditional locking semantics because it makes it harder to think about and statically check locking rules, but we do have a few fundamental locking primitives that take locks conditionally - most obviously the 'trylock' functions. That has always been a problem for 'sparse' checking for locking imbalance, and we've had a special '__cond_lock()' macro that we've used to let sparse know how the locking works: # define __cond_lock(x,c) ((c) ? ({ __acquire(x); 1; }) : 0) so that you can then use this to tell sparse that (for example) the spinlock trylock macro ends up acquiring the lock when it succeeds, but not when it fails: #define raw_spin_trylock(lock) __cond_lock(lock, _raw_spin_trylock(lock)) and then sparse can follow along the locking rules when you have code like if (!spin_trylock(&dentry->d_lock)) return LRU_SKIP; .. sparse sees that the lock is held here.. spin_unlock(&dentry->d_lock); and sparse ends up happy about the lock contexts. However, this '__cond_lock()' use does result in very ugly header files, and requires you to basically wrap the real function with that macro that uses '__cond_lock'. Which has made PeterZ NAK things that try to fix sparse warnings over the years [1]. To solve this, there is now a very experimental patch to sparse that basically does the exact same thing as '__cond_lock()' did, but using a function attribute instead. That seems to make PeterZ happy [2]. Note that this does not replace existing use of '__cond_lock()', but only exposes the new proposed attribute and uses it for the previously unannotated 'refcount_dec_and_lock()' family of functions. For existing sparse installations, this will make no difference (a negative output context was ignored), but if you have the experimental sparse patch it will make sparse now understand code that uses those functions, the same way '__cond_lock()' makes sparse understand the very similar 'atomic_dec_and_lock()' uses that have the old '__cond_lock()' annotations. Note that in some cases this will silence existing context imbalance warnings. But in other cases it may end up exposing new sparse warnings for code that sparse just didn't see the locking for at all before. This is a trial, in other words. I'd expect that if it ends up being successful, and new sparse releases end up having this new attribute, we'll migrate the old-style '__cond_lock()' users to use the new-style '__cond_acquires' function attribute. The actual experimental sparse patch was posted in [3]. Link: https://lore.kernel.org/all/20130930134434.GC12926@twins.programming.kicks-ass.net/ [1] Link: https://lore.kernel.org/all/Yr60tWxN4P568x3W@worktop.programming.kicks-ass.net/ [2] Link: https://lore.kernel.org/all/CAHk-=wjZfO9hGqJ2_hGQG3U_XzSh9_XaXze=HgPdvJbgrvASfA@mail.gmail.com/ [3] Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Alexander Aring <aahringo@redhat.com> Cc: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull xfs fixes from Darrick Wong: "This fixes some stalling problems and corrects the last of the problems (I hope) observed during testing of the new atomic xattr update feature. - Fix statfs blocking on background inode gc workers - Fix some broken inode lock assertion code - Fix xattr leaf buffer leaks when cancelling a deferred xattr update operation - Clean up xattr recovery to make it easier to understand. - Fix xattr leaf block verifiers tripping over empty blocks. - Remove complicated and error prone xattr leaf block bholding mess. - Fix a bug where an rt extent crossing EOF was treated as "posteof" blocks and cleaned unnecessarily. - Fix a UAF when log shutdown races with unmount" * tag 'xfs-5.19-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: prevent a UAF when log IO errors race with unmount xfs: dont treat rt extents beyond EOF as eofblocks to be cleared xfs: don't hold xattr leaf buffers across transaction rolls xfs: empty xattr leaf header blocks are not corruption xfs: clean up the end of xfs_attri_item_recover xfs: always free xattri_leaf_bp when cancelling a deferred op xfs: use invalidate_lock to check the state of mmap_lock xfs: factor out the common lock flags assert xfs: introduce xfs_inodegc_push() xfs: bound maximum wait time for inodegc work
-
- 02 Jul, 2022 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linuxLinus Torvalds authored
Pull nfsd fixes from Chuck Lever: "Notable regression fixes: - Fix NFSD crash during NFSv4.2 READ_PLUS operation - Fix incorrect status code returned by COMMIT operation" * tag 'nfsd-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: SUNRPC: Fix READ_PLUS crasher NFSD: restore EINVAL error translation in nfsd_commit()
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull parisc architecture fixes from Helge Deller: "Two important fixes for bugs in code which was added in 5.18: - Fix userspace signal failures on 32-bit kernel due to a bug in vDSO - Fix 32-bit load-word unalignment exception handler which returned wrong values" * tag 'for-5.19/parisc-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Fix vDSO signal breakage on 32-bit kernel parisc/unaligned: Fix emulate_ldw() breakage
-
Helge Deller authored
Addition of vDSO support for parisc in kernel v5.18 suddenly broke glibc signal testcases on a 32-bit kernel. The trampoline code (sigtramp.S) which is mapped into userspace includes an offset to the context data on the stack, which is used by gdb and glibc to get access to registers. In a 32-bit kernel we used by mistake the offset into the compat context (which is valid on a 64-bit kernel only) instead of the offset into the "native" 32-bit context. Reported-by: John David Anglin <dave.anglin@bell.net> Tested-by: John David Anglin <dave.anglin@bell.net> Fixes: df24e178 ("parisc: Add vDSO support") CC: stable@vger.kernel.org # 5.18 Signed-off-by: Helge Deller <deller@gmx.de>
-
Linus Torvalds authored
Merge tag 'perf-tools-fixes-for-v5.19-2022-07-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - BPF program info linear (BPIL) data is accessed assuming 64-bit alignment resulting in undefined behavior as the data is just byte aligned. Fix it, Found using -fsanitize=undefined. - Fix 'perf offcpu' build on old kernels wrt task_struct's state/__state field. - Fix perf_event_attr.sample_type setting on the 'offcpu-time' event synthesized by the 'perf offcpu' tool. - Don't bail out when synthesizing PERF_RECORD_ events for pre-existing threads when one goes away while parsing its procfs entries. - Don't sort the task scan result from /proc, its not needed and introduces bugs when the main thread isn't the first one to be processed. - Fix uninitialized 'offset' variable on aarch64 in the unwind code. - Sync KVM headers with the kernel sources. * tag 'perf-tools-fixes-for-v5.19-2022-07-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf synthetic-events: Ignore dead threads during event synthesis perf synthetic-events: Don't sort the task scan result from /proc perf unwind: Fix unitialized 'offset' variable on aarch64 tools headers UAPI: Sync linux/kvm.h with the kernel sources perf bpf: 8 byte align bpil data tools kvm headers arm64: Update KVM headers from the kernel sources perf offcpu: Accept allowed sample types only perf offcpu: Fix build failure on old kernels
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - Fix BPF uapi confusion about the correct type of bpf_user_pt_regs_t. - Fix virt_addr_valid() when memory is hotplugged above the boot-time high_memory value. - Fix a bug in 64-bit Book3E map_kernel_page() which would incorrectly allocate a PMD page at PUD level. - Fix a couple of minor issues found since we enabled KASAN for 64-bit Book3S. Thanks to Aneesh Kumar K.V, Cédric Le Goater, Christophe Leroy, Kefeng Wang, Liam Howlett, Nathan Lynch, and Naveen N. Rao. * tag 'powerpc-5.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/memhotplug: Add add_pages override for PPC powerpc/bpf: Fix use of user_pt_regs in uapi powerpc/prom_init: Fix kernel config grep powerpc/book3e: Fix PUD allocation size in map_kernel_page() powerpc/xive/spapr: correct bitmap allocation size
-