- 25 Jul, 2015 6 commits
-
-
Linus Torvalds authored
Merge tag 'trace-v4.2-rc2-fix3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull ftrace fix from Steven Rostedt: "Back in 3.16 the ftrace code was redesigned and cleaned up to remove the double iteration list (one for registered ftrace ops, and one for registered "global" ops), to just use one list. That simplified the code but also broke the function tracing filtering on pid. This updates the code to handle the filtering again with the new logic" * tag 'trace-v4.2-rc2-fix3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ftrace: Fix breakage of set_ftrace_pid
-
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/nvdimmLinus Torvalds authored
Pull libnvdimm fix from Dan Williams: "A minor fix for the libnvdimm subsystem. This is not critical. The problem can be worked around in userspace by putting the namespace temporarily into raw mode (ndctl_namespace_set_raw_mode() from libndctl), but that is awkward for management utilities. * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/nvdimm: libnvdimm: fix namespace seed creation
-
git://neil.brown.name/mdLinus Torvalds authored
Pull md fixes from Neil Brown: "Some md fixes for 4.2 Several are tagged for -stable. A few aren't because they are not very, serious or because they are in the 'experimental' cluster code" * tag 'md/4.2-fixes' of git://neil.brown.name/md: md/raid5: clear R5_NeedReplace when no longer needed. Fix read-balancing during node failure md-cluster: fix bitmap sub-offset in bitmap_read_sb md: Return error if request_module fails and returns positive value md: Skip cluster setup in case of error while reading bitmap md/raid1: fix test for 'was read error from last working device'. md: Skip cluster setup for dm-raid md: flush ->event_work before stopping array. md/raid10: always set reshape_safe when initializing reshape_position. md/raid5: avoid races when changing cache size.
-
git://git.infradead.org/linux-mtdLinus Torvalds authored
Pull MTD fixes from Brian Norris: "Two trivial updates. I meant to send these much earlier, but I've been preoccupied. - Add MAINTAINERS entry for diskonchip g3 driver - Fix an overlooked conflict in bitfield value assignments The latter update is a bit overdue, but there's no reason to wait any longer" * tag 'for-linus-20150724' of git://git.infradead.org/linux-mtd: mtd: nand: Fix NAND_USE_BOUNCE_BUFFER flag conflict MAINTAINERS: mtd: docg3: add docg3 maintainer
-
Dan Williams authored
A new BLK namespace "seed" device is created whenever the current seed is successfully probed. However, if that namespace is assigned to a BTT it may never directly experience a successful probe as it is a subordinate device to a BTT configuration. The effect of the current code is that no new namespaces can be instantiated, after the seed namespace, to consume available BLK DPA capacity. Fix this by treating a successful BTT probe event as a successful probe event for the backing namespace. Reported-by: Nicholas Moulin <nicholas.w.moulin@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "Four smaller fixes for the current series. This contains: - A fix for clones of discard bio's, that can cause data corruption. From Martin. - A fix for null_blk, where in certain queue modes it could access a request after it had been freed. From Mike Krinkin. - An error handling leak fix for blkcg, from Tejun. - Also from Tejun, export of the functions that a file system needs to implement cgroup writeback support" * 'for-linus' of git://git.kernel.dk/linux-block: block: Do a full clone when splitting discard bios block: export bio_associate_*() and wbc_account_io() blkcg: fix gendisk reference leak in blkg_conf_prep() null_blk: fix use-after-free problem
-
- 24 Jul, 2015 34 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libataLinus Torvalds authored
Pull libata fixes from Tejun Heo: "A couple important fixes. - A block layer change which removed restriction on max transfer size led to silent data corruption on some devices. A new quirk is added to restore the old size limit for the reported device. If it gets reported on more devices, we might have to consider restoring the restriction for ATA devices by default. - There finally is a SSD which is confirmed to cause data corruption on TRIM regardless of which flavor is used. A new quirk is added and the device is blacklisted - Other device-specific workarounds" * 'for-4.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: libata: Do not blacklist M510DC libata: increase the timeout when setting transfer mode libata: add ATA_HORKAGE_MAX_SEC_1024 to revert back to previous max_sectors limit libata: force disable trim for SuperSSpeed S238 libata: add ATA_HORKAGE_NOTRIM libata: add ATA_HORKAGE_BROKEN_FPDMA_AA quirk for HP 250GB SATA disk VB0250EAVER ata: pmp: add quirk for Marvell 4140 SATA PMP
-
git://git.linaro.org/people/ulf.hansson/mmcLinus Torvalds authored
Pull MMC fixes from Ulf Hansson: "Here are some mmc fixes intended for v4.2 rc4. Note, most of the changes are for the sdhci-esdhc-imx controller, which also required us to modify some related DTS files. Those changes have been acked by the SoC maintainer. MMC core: - Fix a reference inbalance issue for power_ro_lock_show() sysfs handler MMC host: - omap_hsmmc: Fix IRQ errorhandling for CD, DTO, and CRC - sdhci: Prevent a kernel panic while using DMA - mtk-sd: Let it depend on HAS_DMA to prevent build errors - sdhci-esdhc: Make 8BIT bus work - sdhci-esdhc-imx: Fix some regressions for DT based platforms - sdhci-pxav3: Fix a regression for DT based platforms" * tag 'mmc-4.2-rc3' of git://git.linaro.org/people/ulf.hansson/mmc: mmc: sdhci-pxav3: fix platform_data is not initialized dts: mmc: fsl-imx-esdhc: remove fsl,cd-controller support mmc: sdhci-esdhc-imx: clear f_max in boarddata mmc: sdhci-esdhc-imx: remove duplicated dts parsing mmc: sdhci: make max-frequency property in device tree work mmc: sdhci-esdhc-imx: move all non dt probe code into one function mmc: sdhci-esdhc-imx: fix cd regression for dt platform dts: imx7: fix sd card gpio polarity specified in device tree dts: imx25: fix sd card gpio polarity specified in device tree dts: imx6: fix sd card gpio polarity specified in device tree dts: imx53: fix sd card gpio polarity specified in device tree dts: imx51: fix sd card gpio polarity specified in device tree mmc: sdhci-esdhc: Make 8BIT bus work mmc: block: Add missing mmc_blk_put() in power_ro_lock_show() mmc: MMC_MTK should depend on HAS_DMA mmc: sdhci check parameters before call dma_free_coherent mmc: omap_hsmmc: Handle BADA, DEB and CEB interrupts mmc: omap_hsmmc: Fix DTO and DCRC handling
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input fixes from Dmitry Torokhov: "A fix for the warnings/oops when handling HID devices with "unnamed" LEDs and couple of other driver fixups"" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: goodix - fix touch coordinates on WinBook TW100 and TW700 Input: LEDs - skip unnamed LEDs Input: usbtouchscreen - avoid unresponsive TSC-30 touch screen Input: elantech - force resolution of 31 u/mm Input: zforce - don't overwrite the stack
-
Linus Torvalds authored
Merge tag 'regulator-fix-v4.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "As well as some driver specific fixes there's several fixes here for the core support for regulators supplying other regulators fixing both an issue with ACPI support (which had never been tested before) and some error handling and device removal issues that Javier noticed" * tag 'regulator-fix-v4.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: core: Fix memory leak in regulator_resolve_supply() regulator: core: Increase refcount for regulator supply's module regulator: core: Handle full constraints systems when resolving supplies regulator: 88pm800: fix LDO vsel_mask value regulator: max8973: Fix up control flag option for bias control regulator: s2mps11: Fix GPIO suspend enable shift wrapping bug
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spiLinus Torvalds authored
Pull spi fixes from Mark Brown: "A small collection of pretty much unremarkable driver specific fixes here plus the addition of a new device ID to spidev which requires no other code changes" * tag 'spi-fix-v4.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: imx: Fix small DMA transfers spi: zynq: missing break statement spi: SPI_ZYNQMP_GQSPI should depend on HAS_DMA spi: spidev: add compatible value for LTC2488 spi: img-spfi: fix support for speeds up to 1/4th input clock
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "This has been a calm week again: one minor lockdep fix for PCM core, and the most of the rest are HD-audio quirks and fixups for various chips and machines" * tag 'sound-4.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Add headset mic pin quirk for a Dell device ALSA: hda - remove one pin from ALC292_STANDARD_PINS ALSA: hda - Add new GPU codec ID 0x10de007d to snd-hda ALSA: hda: add new AMD PCI IDs with proper driver caps ALSA: hda - Fix Skylake codec timeout ALSA: hda - Add headset mic support for Acer Aspire V5-573G ALSA: sparc: Add missing kfree in error path ALSA: pcm: Fix lockdep warning with nonatomic PCM ops
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hidLinus Torvalds authored
Pull HID fixes from Jiri Kosina: - kernel crash fixes for multitouch and wacom drivers, by Brent Adam and Dan Carpenter - cp2112 data packet race condition corruption fix, by Antonio Borneo - a few new device IDs for wacom and microsoft drivers * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: cp2112: fix to force single data-report reply HID: wacom: Enable pad device for older Bamboo Touch tablets HID: multitouch: Fix fields from pen report ID being interpreted for multitouch HID: microsoft: Add quirk for MS Surface Type/Touch cover HID: wacom: NULL dereferences on error in probe()
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Aome amdgpu, one i915, one ttm and one hlcdc, nothing too scary. All seems fine for about this time" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/ttm: recognize ARM64 arch in ioprot handler drm/amdgpu/cz/dpm: properly report UVD and VCE clock levels drm/amdgpu/cz: implement voltage validation properly drm/amdgpu: add VCE harvesting instance query drm/amdgpu: implement VCE 3.0 harvesting support (v4) drm/amdgpu/dce10: Re-set VBLANK interrupt state when enabling a CRTC drm/amdgpu/dce11: Re-set VBLANK interrupt state when enabling a CRTC drm: Stop resetting connector state to unknown drm/i915: Use two 32bit reads for select 64bit REG_READ ioctls drm: atmel-hlcdc: fix vblank initial state
-
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tileLinus Torvalds authored
Pull arch/tile bugfix from Chris Metcalf: "This fixes a bug in freeing the initramfs memory" * 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: tile: use free_bootmem_late() for initrd
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fixes from Paolo Bonzini: "Everything related to the new quirks and memory type features: - small improvements to the quirks API - extending one of the quirks from just AMD to Intel as well, because 4.2 can show the same problem with problematic firmware on Intel too" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: rename quirk constants to KVM_X86_QUIRK_* KVM: vmx: obey KVM_QUIRK_CD_NW_CLEARED KVM: x86: introduce kvm_check_has_quirk KVM: MTRR: simplify kvm_mtrr_get_guest_memory_type KVM: MTRR: fix memory type handling if MTRR is completely disabled
-
Steven Rostedt (Red Hat) authored
Commit 4104d326 ("ftrace: Remove global function list and call function directly") simplified the ftrace code by removing the global_ops list with a new design. But this cleanup also broke the filtering of PIDs that are added to the set_ftrace_pid file. Add back the proper hooks to have pid filtering working once again. Cc: stable@vger.kernel.org # 3.16+ Reported-by: Matt Fleming <matt@console-pimps.org> Reported-by: Richard Weinberger <richard.weinberger@gmail.com> Tested-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
-
Bastien Nocera authored
The touchscreen on the WinBook TW100 and TW700 don't match the default display, with 0,0 touches being reported when touching at the bottom right of the screen. 1280,800 0,800 +-------------+ | | | | | | +-------------+ 1280,0 0,0 It's unfortunately impossible to detect this problem with data from the DSDT, or other auxiliary metadata, so fallback to quirking this specific model of tablet instead. Signed-off-by: Bastien Nocera <hadess@hadess.net> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dmitry Torokhov authored
Devices may declare more LEDs than what is known to input-leds (HID does this for some devices). Instead of showing ugly warnings on connect and, even worse, oopsing on disconnect, let's simply ignore LEDs that are not known to us. Reported-and-tested-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Mark Brown authored
Merge remote-tracking branches 'spi/fix/gqspi', 'spi/fix/imx', 'spi/fix/mg-spfi' and 'spi/fix/spidev' into spi-linus
-
Mark Brown authored
Merge remote-tracking branches 'regulator/fix/88pm800', 'regulator/fix/max8973', 'regulator/fix/s2mps11' and 'regulator/fix/supply' into regulator-linus
-
Mark Brown authored
-
Sascha Hauer authored
DMA transfers must be greater than the watermark level size. spi_imx->rx_wml and spi_imx->tx_wml contain the watermark level in 32bit words whereas struct spi_transfer contains the transfer len in bytes. Fix the check if DMA is possible for a transfer accordingly. This fixes transfers with sizes between 33 and 128 bytes for which previously was claimed that DMA is possible. Fixes: f62caccd (spi: spi-imx: add DMA support) Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: stable@vger.kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
-
Jingju Hou authored
pdev->dev.platform_data is not initialized if match is true in function sdhci_pxav3_probe. Just local variable pdata is assigned the return value from function pxav3_get_mmc_pdata(). static int sdhci_pxav3_probe(struct platform_device *pdev) { struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data; ... if (match) { ret = mmc_of_parse(host->mmc); if (ret) goto err_of_parse; sdhci_get_of_property(pdev); pdata = pxav3_get_mmc_pdata(dev); } ... } Signed-off-by: Jingju Hou <houjingj@marvell.com> Fixes: b650352d("mmc: sdhci-pxa: Add device tree support") Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Dong Aisheng authored
It's not supported by driver anymore after using runtime pm and there's no user of it, so delete it now. Signed-off-by: Dong Aisheng <aisheng.dong@freescale.com> Reviewed-by: Johan Derycke <johan.derycke@barco.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Dong Aisheng authored
After commit 8d86e4fc ("mmc: sdhci-esdhc-imx: Call mmc_of_parse()"), it's not used anymore. Signed-off-by: Dong Aisheng <aisheng.dong@freescale.com> Reviewed-by: Johan Derycke <johan.derycke@barco.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Dong Aisheng authored
After commit 8d86e4fc ("mmc: sdhci-esdhc-imx: Call mmc_of_parse()"), we do not need those duplicated parsing anymore. Note: fsl,cd-controller is also deleted due to the driver does not support controller card detection anymore after switch to runtime pm. And there's no user of it right now in device tree. wp-gpios is kept because we're still support fsl,wp-controller, so we need a way to check if it's gpio wp or controller wp. Signed-off-by: Dong Aisheng <aisheng.dong@freescale.com> Reviewed-by: Johan Derycke <johan.derycke@barco.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Dong Aisheng authored
Device tree provides option to specify the max freqency with property "max-frequency" in dts and common parse function mmc_of_parse() will parse it and use this value to set host->f_max to tell the MMC core the maxinum frequency the host works. However, current sdhci driver will finally overwrite this value with host->max_clk regardless of the max-frequency property. This patch makes sure not overwrite the max-frequency set from device tree and do basic sanity check. Signed-off-by: Dong Aisheng <aisheng.dong@freescale.com> Reviewed-by: Johan Derycke <johan.derycke@barco.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Dong Aisheng authored
This is an incremental fix of commit e62bd351b("mmc: sdhci-esdhc-imx: Do not break platform data boards"). After commit 8d86e4fc ("mmc: sdhci-esdhc-imx: Call mmc_of_parse()"), we do not need to run the check of boarddata->wp_type/cd_type/max_bus_width again for dt platform since those are already handled by mmc_of_parse(). Current code only exclude the checking of wp_type for dt platform which does not make sense. This patch moves all non dt probe code into one function. Besides, since we only support SD3.0/eMMC HS200 for dt platform, the support_vsel checking and ultra high speed pinctrl state are also merged into sdhci_esdhc_imx_probe_dt. Then we have two separately probe function for dt and non dt type. This can make the driver probe more clearly. Signed-off-by: Dong Aisheng <aisheng.dong@freescale.com> Reviewed-by: Johan Derycke <johan.derycke@barco.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Dong Aisheng authored
Current card detect probe process is that when driver finds a valid ESDHC_CD_GPIO, it will clear the quirk SDHCI_QUIRK_BROKEN_CARD_DETECTION which is set by default for all esdhc/usdhc controllers. Then host driver will know there's a valid card detect function. Commit 8d86e4fc ("mmc: sdhci-esdhc-imx: Call mmc_of_parse()") breaks GPIO CD function for dt platform that it will return directly when find ESDHC_CD_GPIO for dt platform which result in the later wrongly to keep SDHCI_QUIRK_BROKEN_CARD_DETECTION for all dt platforms. Then MMC_CAP_NEEDS_POLL will be used instead even there's a valid GPIO card detect. This patch adds back this function and follows the original approach to clear the quirk if find an valid CD GPIO for dt platforms. Fixes: 8d86e4fc ("mmc: sdhci-esdhc-imx: Call mmc_of_parse()") Signed-off-by: Dong Aisheng <aisheng.dong@freescale.com> Reviewed-by: Johan Derycke <johan.derycke@barco.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Dong Aisheng authored
cd-gpios polarity should be changed to GPIO_ACTIVE_LOW and wp-gpios should be changed to GPIO_ACTIVE_HIGH. Otherwise, the SD may not work properly due to wrong polarity inversion specified in DT after switch to common parsing function mmc_of_parse(). Signed-off-by: Dong Aisheng <aisheng.dong@freescale.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Dong Aisheng authored
cd-gpios polarity should be changed to GPIO_ACTIVE_LOW and wp-gpios should be changed to GPIO_ACTIVE_HIGH. Otherwise, the SD may not work properly due to wrong polarity inversion specified in DT after switch to common parsing function mmc_of_parse(). Signed-off-by: Dong Aisheng <aisheng.dong@freescale.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Dong Aisheng authored
cd-gpios polarity should be changed to GPIO_ACTIVE_LOW and wp-gpios should be changed to GPIO_ACTIVE_HIGH. Otherwise, the SD may not work properly due to wrong polarity inversion specified in DT after switch to common parsing function mmc_of_parse(). Signed-off-by: Dong Aisheng <aisheng.dong@freescale.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Dong Aisheng authored
cd-gpios polarity should be changed to GPIO_ACTIVE_LOW and wp-gpios should be changed to GPIO_ACTIVE_HIGH. Otherwise, the SD may not work properly due to wrong polarity inversion specified in DT after switch to common parsing function mmc_of_parse(). Signed-off-by: Dong Aisheng <aisheng.dong@freescale.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Dong Aisheng authored
cd-gpios polarity should be changed to GPIO_ACTIVE_LOW and wp-gpios should be changed to GPIO_ACTIVE_HIGH. Otherwise, the SD may not work properly due to wrong polarity inversion specified in DT after switch to common parsing function mmc_of_parse(). Signed-off-by: Dong Aisheng <aisheng.dong@freescale.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Joakim Tjernlund authored
Support for 8BIT bus with was added some time ago to sdhci-esdhc but then missed to remove the 8BIT from the reserved bit mask which made 8BIT non functional. Fixes: 66b50a00 ("mmc: esdhc: Add support for 8-bit bus width and..") Signed-off-by: Joakim Tjernlund <joakim.tjernlund@transmode.se> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Tomas Winkler authored
Enclosing mmc_blk_put() is missing in power_ro_lock_show() sysfs handler, let's add it. Fixes: add710ea ("mmc: boot partition ro lock support") Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Geert Uytterhoeven authored
If NO_DMA=y: ERROR: "dma_alloc_coherent" [drivers/mmc/host/mtk-sd.ko] undefined! ERROR: "dma_unmap_sg" [drivers/mmc/host/mtk-sd.ko] undefined! ERROR: "dma_map_sg" [drivers/mmc/host/mtk-sd.ko] undefined! ERROR: "dma_free_coherent" [drivers/mmc/host/mtk-sd.ko] undefined! Add a dependency on HAS_DMA to fix this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Peng Fan authored
We should not call dma_free_coherent if host->adma_table is NULL, otherwise may trigger panic. Fixes: d1e49f77 ("mmc: sdhci: convert ADMA descriptors to a...") Signed-off-by: Peng Fan <van.freenix@gmail.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Vignesh R authored
Sometimes BADA, DEB or CEB error interrupts occur when sd card is unplugged during data transfer. These interrupts are currently ignored by the interrupt handler. But, this results in card not being recognised on subsequent insertion. This is because mmcqd is waiting forever for the data transfer(for which error occurred) to complete. Fix this, by reporting BADA, DEB, CEB errors to mmc-core as -EILSEQ, so that the core can do appropriate handling. Signed-off-by: Vignesh R <vigneshr@ti.com> Tested-by: Andreas Fenkart <afenkart@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-