- 14 Jul, 2020 2 commits
-
-
Christoph Hellwig authored
These two definitions are unused now. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
-
Gao Xiang authored
In the course of some operations, we look up the perag from the mount multiple times to get or change perag information. These are often very short pieces of code, so while the lookup cost is generally low, the cost of the lookup is far higher than the cost of the operation we are doing on the perag. Since we changed buffers to hold references to the perag they are cached in, many modification contexts already hold active references to the perag that are held across these operations. This is especially true for any operation that is serialised by an allocation group header buffer. In these cases, we can just use the buffer's reference to the perag to avoid needing to do lookups to access the perag. This means that many operations don't need to do perag lookups at all to access the perag because they've already looked up objects that own persistent references and hence can use that reference instead. Cc: Dave Chinner <dchinner@redhat.com> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Signed-off-by:
Gao Xiang <hsiangkao@redhat.com> Reviewed-by:
-
- 09 Jul, 2020 1 commit
-
-
Waiman Long authored
Depending on the workloads, the following circular locking dependency warning between sb_internal (a percpu rwsem) and fs_reclaim (a pseudo lock) may show up: ====================================================== WARNING: possible circular locking dependency detected 5.0.0-rc1+ #60 Tainted: G W ------------------------------------------------------ fsfreeze/4346 is trying to acquire lock: 0000000026f1d784 (fs_reclaim){+.+.}, at: fs_reclaim_acquire.part.19+0x5/0x30 but task is already holding lock: 0000000072bfc54b (sb_internal){++++}, at: percpu_down_write+0xb4/0x650 which lock already depends on the new lock. : Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(sb_internal); lock(fs_reclaim); lock(sb_internal); lock(fs_reclaim); *** DEADLOCK *** 4 locks held by fsfreeze/4346: #0: 00000000b478ef56 (sb_writers#8){++++}, at: percpu_down_write+0xb4/0x650 #1: 000000001ec487a9 (&type->s_umount_key#28){++++}, at: freeze_super+0xda/0x290 #2: 000000003edbd5a0 (sb_pagefaults){++++}, at: percpu_down_write+0xb4/0x650 #3: 0000000072bfc54b (sb_internal){++++}, at: percpu_down_write+0xb4/0x650 stack backtrace: Call Trace: dump_stack+0xe0/0x19a print_circular_bug.isra.10.cold.34+0x2f4/0x435 check_prev_add.constprop.19+0xca1/0x15f0 validate_chain.isra.14+0x11af/0x3b50 __lock_acquire+0x728/0x1200 lock_acquire+0x269/0x5a0 fs_reclaim_acquire.part.19+0x29/0x30 fs_reclaim_acquire+0x19/0x20 kmem_cache_alloc+0x3e/0x3f0 kmem_zone_alloc+0x79/0x150 xfs_trans_alloc+0xfa/0x9d0 xfs_sync_sb+0x86/0x170 xfs_log_sbcount+0x10f/0x140 xfs_quiesce_attr+0x134/0x270 xfs_fs_freeze+0x4a/0x70 freeze_super+0x1af/0x290 do_vfs_ioctl+0xedc/0x16c0 ksys_ioctl+0x41/0x80 __x64_sys_ioctl+0x73/0xa9 do_syscall_64+0x18f/0xd23 entry_SYSCALL_64_after_hwframe+0x49/0xbe This is a false positive as all the dirty pages are flushed out before the filesystem can be frozen. One way to avoid this splat is to add GFP_NOFS to the affected allocation calls by using the memalloc_nofs_save()/memalloc_nofs_restore() pair. This shouldn't matter unless the system is really running out of memory. In that particular case, the filesystem freeze operation may fail while it was succeeding previously. Without this patch, the command sequence below will show that the lock dependency chain sb_internal -> fs_reclaim exists. # fsfreeze -f /home # fsfreeze --unfreeze /home # grep -i fs_reclaim -C 3 /proc/lockdep_chains | grep -C 5 sb_internal After applying the patch, such sb_internal -> fs_reclaim lock dependency chain can no longer be found. Because of that, the locking dependency warning will not be shown. Suggested-by:Dave Chinner <david@fromorbit.com> Signed-off-by:
Waiman Long <longman@redhat.com> Reviewed-by:
-
- 07 Jul, 2020 22 commits
-
-
Darrick J. Wong authored
Make sure the rtbitmap is large enough to store the entire bitmap. Signed-off-by:
Allison Collins <allison.henderson@oracle.com>
-
Darrick J. Wong authored
Ensure that the realtime bitmap file is backed entirely by written extents. No holes, no unwritten blocks, etc. Signed-off-by:
-
Dave Chinner authored
This debug code is called on every xfs_iflush() call, which then checks every inode in the buffer for non-zero unlinked list field. Hence it checks every inode in the cluster buffer every time a single inode on that cluster it flushed. This is resulting in: - 38.91% 5.33% [kernel] [k] xfs_iflush - 17.70% xfs_iflush - 9.93% xfs_inobp_check 4.36% xfs_buf_offset 10% of the CPU time spent flushing inodes is repeatedly checking unlinked fields in the buffer. We don't need to do this. The other place we call xfs_inobp_check() is xfs_iunlink_update_dinode(), and this is after we've done this assert for the agino we are about to write into that inode: ASSERT(xfs_verify_agino_or_null(mp, agno, next_agino)); which means we've already checked that the agino we are about to write is not 0 on debug kernels. The inode buffer verifiers do everything else we need, so let's just remove this debug code. Signed-off-by: -
Dave Chinner authored
xfs_iflush_done() does 3 distinct operations to the inodes attached to the buffer. Separate these operations out into functions so that it is easier to modify these operations independently in future. Signed-off-by:
-
Dave Chinner authored
Now that we have all the dirty inodes attached to the cluster buffer, we don't actually have to do radix tree lookups to find them. Sure, the radix tree is efficient, but walking a linked list of just the dirty inodes attached to the buffer is much better. We are also no longer dependent on having a locked inode passed into the function to determine where to start the lookup. This means we can drop it from the function call and treat all inodes the same. We also make xfs_iflush_cluster skip inodes marked with XFS_IRECLAIM. This we avoid races with inodes that reclaim is actively referencing or are being re-initialised by inode lookup. If they are actually dirty, they'll get written by a future cluster flush.... We also add a shutdown check after obtaining the flush lock so that we catch inodes that are dirty in memory and may have inconsistent state due to the shutdown in progress. We abort these inodes directly and so they remove themselves directly from the buffer list and the AIL rather than having to wait for the buffer to be failed and callbacks run to be processed correctly. Signed-off-by:
-
Dave Chinner authored
with xfs_iflush() gone, we can rename xfs_iflush_int() back to xfs_iflush(). Also move it up above xfs_iflush_cluster() so we don't need the forward definition any more. Signed-off-by:
Amir Goldstein <amir73il@gmail.com> Reviewed-by:
Brian Foster <bfoster@redhat.com> Signed-off-by:
-
Dave Chinner authored
Now we have a cached buffer on inode log items, we don't need to do buffer lookups when flushing inodes anymore - all we need to do is lock the buffer and we are ready to go. This largely gets rid of the need for xfs_iflush(), which is essentially just a mechanism to look up the buffer and flush the inode to it. Instead, we can just call xfs_iflush_cluster() with a few modifications to ensure it also flushes the inode we already hold locked. This allows the AIL inode item pushing to be almost entirely non-blocking in XFS - we won't block unless memory allocation for the cluster inode lookup blocks or the block device queues are full. Writeback during inode reclaim becomes a little more complex because we now have to lock the buffer ourselves, but otherwise this change is largely a functional no-op that removes a whole lot of code. Signed-off-by:
-
Dave Chinner authored
Rather than attach inodes to the cluster buffer just when we are doing IO, attach the inodes to the cluster buffer when they are dirtied. The means the buffer always carries a list of dirty inodes that reference it, and we can use that list to make more fundamental changes to inode writeback that aren't otherwise possible. Signed-off-by:
-
Dave Chinner authored
Once we have inodes pinning the cluster buffer and attached whenever they are dirty, we no longer have a guarantee that the items are flush locked when we lock the cluster buffer. Hence we cannot just walk the buffer log item list and modify the attached inodes. If the inode is not flush locked, we have to ILOCK it first and then flush lock it to do all the prerequisite checks needed to avoid races with other code. This is already handled by xfs_ifree_get_one_inode(), so rework the inode iteration loop and function to update all inodes in cache whether they are attached to the buffer or not. Note: we also remove the copying of the log item lsn to the ili_flush_lsn as xfs_iflush_done() now uses the XFS_ISTALE flag to trigger aborts and so flush lsn matching is not needed in IO completion for processing freed inodes. Signed-off-by:
-
Dave Chinner authored
Inode reclaim is quite different now to the way described in various comments, so update all the comments explaining what it does and how it works. Signed-off-by:
-
Dave Chinner authored
Clean up xfs_reclaim_inodes() callers. Most callers want blocking behaviour, so just make the existing SYNC_WAIT behaviour the default. For the xfs_reclaim_worker(), just call xfs_reclaim_inodes_ag() directly because we just want optimistic clean inode reclaim to be done in the background. For xfs_quiesce_attr() we can just remove the inode reclaim calls as they are a historic relic that was required to flush dirty inodes that contained unlogged changes. We now log all changes to the inodes, so the sync AIL push from xfs_log_quiesce() called by xfs_quiesce_attr() will do all the required inode writeback for freeze. Seeing as we now want to loop until all reclaimable inodes have been reclaimed, make xfs_reclaim_inodes() loop on the XFS_ICI_RECLAIM_TAG tag rather than having xfs_reclaim_inodes_ag() tell it that inodes were skipped. This is much more reliable and will always loop until all reclaimable inodes are reclaimed. Signed-off-by:
-
Dave Chinner authored
All background reclaim is SYNC_TRYLOCK already, and even blocking reclaim (SYNC_WAIT) can use trylock mechanisms as xfs_reclaim_inodes_ag() will keep cycling until there are no more reclaimable inodes. Hence we can kill SYNC_TRYLOCK from inode reclaim and make everything unconditionally non-blocking. We remove all the optimistic "avoid blocking on locks" checks done in xfs_reclaim_inode_grab() as nothing blocks on locks anymore. Further, checking XFS_IFLOCK optimistically can result in detecting inodes in the process of being cleaned (i.e. between being removed from the AIL and having the flush lock dropped), so for xfs_reclaim_inodes() to reliably reclaim all inodes we need to drop these checks anyway. Signed-off-by:
-
Dave Chinner authored
When we attempt to reclaim an inode, the first thing we do is take the inode lock. This is blocking right now, so if the inode being accessed by something else (e.g. being flushed to the cluster buffer) we will block here. Change this to a trylock so that we do not block inode reclaim unnecessarily here. Signed-off-by:
-
Dave Chinner authored
Inode reclaim will still throttle direct reclaim on the per-ag reclaim locks. This is no longer necessary as reclaim can run non-blocking now. Hence we can remove these locks so that we don't arbitrarily block reclaimers just because there are more direct reclaimers than there are AGs. This can result in multiple reclaimers working on the same range of an AG, but this doesn't cause any apparent issues. Optimising the spread of concurrent reclaimers for best efficiency can be done in a future patchset. Signed-off-by:
-
Dave Chinner authored
We no longer need to issue IO from shrinker based inode reclaim to prevent spurious OOM killer invocation. This leaves only the global filesystem management operations such as unmount needing to writeback dirty inodes and reclaim them. Instead of using the reclaim pass to write dirty inodes before reclaiming them, use the AIL to push all the dirty inodes before we try to reclaim them. This allows us to remove all the conditional SYNC_WAIT locking and the writeback code from xfs_reclaim_inode() and greatly simplify the checks we need to do to reclaim an inode. Signed-off-by:
-
Dave Chinner authored
Now that dirty inode writeback doesn't cause read-modify-write cycles on the inode cluster buffer under memory pressure, the need to throttle memory reclaim to the rate at which we can clean dirty inodes goes away. That is due to the fact that we no longer thrash inode cluster buffers under memory pressure to clean dirty inodes. This means inode writeback no longer stalls on memory allocation or read IO, and hence can be done asynchronously without generating memory pressure. As a result, blocking inode writeback in reclaim is no longer necessary to prevent reclaim priority windup as cleaning dirty inodes is no longer dependent on having memory reserves available for the filesystem to make progress reclaiming inodes. Hence we can convert inode reclaim to be non-blocking for shrinker callouts, both for direct reclaim and kswapd. On a vanilla kernel, running a 16-way fsmark create workload on a 4 node/16p/16GB RAM machine, I can reliably pin 14.75GB of RAM via userspace mlock(). The OOM killer gets invoked at 15GB of pinned RAM. Without the inode cluster pinning, this non-blocking reclaim patch triggers premature OOM killer invocation with the same memory pinning, sometimes with as much as 45% of RAM being free. It's trivially easy to trigger the OOM killer when reclaim does not block. With pinning inode clusters in RAM and then adding this patch, I can reliably pin 14.5GB of RAM and still have the fsmark workload run to completion. The OOM killer gets invoked 14.75GB of pinned RAM, which is only a small amount of memory less than the vanilla kernel. It is much more reliable than just with async reclaim alone. simoops shows that allocation stalls go away when async reclaim is used. Vanilla kernel: Run time: 1924 seconds Read latency (p50: 3,305,472) (p95: 3,723,264) (p99: 4,001,792) Write latency (p50: 184,064) (p95: 553,984) (p99: 807,936) Allocation latency (p50: 2,641,920) (p95: 3,911,680) (p99: 4,464,640) work rate = 13.45/sec (avg 13.44/sec) (p50: 13.46) (p95: 13.58) (p99: 13.70) alloc stall rate = 3.80/sec (avg: 2.59) (p50: 2.54) (p95: 2.96) (p99: 3.02) With inode cluster pinning and async reclaim: Run time: 1924 seconds Read latency (p50: 3,305,472) (p95: 3,715,072) (p99: 3,977,216) Write latency (p50: 187,648) (p95: 553,984) (p99: 789,504) Allocation latency (p50: 2,748,416) (p95: 3,919,872) (p99: 4,448,256) work rate = 13.28/sec (avg 13.32/sec) (p50: 13.26) (p95: 13.34) (p99: 13.34) alloc stall rate = 0.02/sec (avg: 0.02) (p50: 0.01) (p95: 0.03) (p99: 0.03) Latencies don't really change much, nor does the work rate. However, allocation almost never stalls with these changes, whilst the vanilla kernel is sometimes reporting 20 stalls/s over a 60s sample period. This difference is due to inode reclaim being largely non-blocking now. IOWs, once we have pinned inode cluster buffers, we can make inode reclaim non-blocking without a major risk of premature and/or spurious OOM killer invocation, and without any changes to memory reclaim infrastructure. Signed-off-by:
-
Dave Chinner authored
When we dirty an inode, we are going to have to write it disk at some point in the near future. This requires the inode cluster backing buffer to be present in memory. Unfortunately, under severe memory pressure we can reclaim the inode backing buffer while the inode is dirty in memory, resulting in stalling the AIL pushing because it has to do a read-modify-write cycle on the cluster buffer. When we have no memory available, the read of the cluster buffer blocks the AIL pushing process, and this causes all sorts of issues for memory reclaim as it requires inode writeback to make forwards progress. Allocating a cluster buffer causes more memory pressure, and results in more cluster buffers to be reclaimed, resulting in more RMW cycles to be done in the AIL context and everything then backs up on AIL progress. Only the synchronous inode cluster writeback in the the inode reclaim code provides some level of forwards progress guarantees that prevent OOM-killer rampages in this situation. Fix this by pinning the inode backing buffer to the inode log item when the inode is first dirtied (i.e. in xfs_trans_log_inode()). This may mean the first modification of an inode that has been held in cache for a long time may block on a cluster buffer read, but we can do that in transaction context and block safely until the buffer has been allocated and read. Once we have the cluster buffer, the inode log item takes a reference to it, pinning it in memory, and attaches it to the log item for future reference. This means we can always grab the cluster buffer from the inode log item when we need it. When the inode is finally cleaned and removed from the AIL, we can drop the reference the inode log item holds on the cluster buffer. Once all inodes on the cluster buffer are clean, the cluster buffer will be unpinned and it will be available for memory reclaim to reclaim again. This avoids the issues with needing to do RMW cycles in the AIL pushing context, and hence allows complete non-blocking inode flushing to be performed by the AIL pushing context. Signed-off-by:
-
Dave Chinner authored
xfs_ail_delete_one() is called directly from dquot and inode IO completion, as well as from the generic xfs_trans_ail_delete() function. Inodes are about to have their own failure handling, and dquots will in future, too. Pull the clearing of the LI_FAILED flag up into the callers so we can customise the code appropriately. Signed-off-by:
-
Dave Chinner authored
When an buffer IO error occurs, we want to mark all the log items attached to the buffer as failed. Open code the error handling loop so that we can modify the flagging for the different types of objects directly and independently of each other. This also allows us to remove the ->iop_error method from the log item operations. Signed-off-by:
-
Dave Chinner authored
Currently when a buffer with attached log items has an IO error it called ->iop_error for each attched log item. These all call xfs_set_li_failed() to handle the error, but we are about to change the way log items manage buffers. hence we first need to remove the per-item dependency on buffer handling done by xfs_set_li_failed(). We already have specific buffer type IO completion routines, so move the log item error handling out of the generic error handling and into the log item specific functions so we can implement per-type error handling easily. This requires a more complex return value from the error handling code so that we can take the correct action the failure handling requires. This results in some repeated boilerplate in the functions, but that can be cleaned up later once all the changes cascade through this code. Signed-off-by:
-
Dave Chinner authored
They are not used anymore, so remove them from the log item and the buffer iodone attachment interfaces. Signed-off-by:
-
Dave Chinner authored
Now that we've sorted inode and dquot buffers, we can apply the same cleanups to dirty buffers with buffer log items. They only have one callback, too, so we don't need the log item callback. Collapse the iodone functions and remove all the now unnecessary infrastructure around callback processing. Signed-off-by:
-
- 06 Jul, 2020 15 commits
-
-
Dave Chinner authored
Similar to inodes, we can call the dquot IO completion functions directly from the buffer completion code, removing another user of log item callbacks for IO completion processing. Signed-off-by:
-
Dave Chinner authored
Having different io completion callbacks for different inode states makes things complex. We can detect if the inode is stale via the XFS_ISTALE flag in IO completion, so we don't need a special callback just for this. This means inodes only have a single iodone callback, and inode IO completion is entirely buffer centric at this point. Hence we no longer need to use a log item callback at all as we can just call xfs_iflush_done() directly from the buffer completions and walk the buffer log item list to complete the all inodes under IO. Signed-off-by:
-
Dave Chinner authored
When we've emptied the buffer log item list, it does a list_del_init on itself to reset it's pointers to itself. This is unnecessary as the list is already empty at this point - it was a left-over fragment from the list_head conversion of the buffer log item list. Remove them. Signed-off-by:
-
Dave Chinner authored
All unmarked dirty buffers should be in the AIL and have log items attached to them. Hence when they are written, we will run a callback to remove the item from the AIL if appropriate. Now that we've handled inode and dquot buffers, all remaining calls are to xfs_buf_iodone() and so we can hard code this rather than use an indirect call. Signed-off-by:
-
Dave Chinner authored
Log recovery has it's own buffer write completion handler for buffers that it directly recovers. Convert these to direct calls by flagging these buffers as being log recovery buffers. The flag will get cleared by the log recovery IO completion routine, so it will never leak out of log recovery. Signed-off-by:
-
Dave Chinner authored
dquot buffers always have write IO callbacks, so by marking them directly we can avoid needing to attach ->b_iodone functions to them. This avoids an indirect call, and makes future modifications much simpler. This is largely a rearrangement of the code at this point - no IO completion functionality changes at this point, just how the code is run is modified. Signed-off-by:
-
Dave Chinner authored
Inode buffers always have write IO callbacks, so by marking them directly we can avoid needing to attach ->b_iodone functions to them. This avoids an indirect call, and makes future modifications much simpler. While this is largely a refactor of existing functionality, we broaden the scope of the flag to beyond where inodes are explicitly attached because future changes need to know what type of log items are attached to the buffer. Adding this buffer flag may invoke the inode iodone callback in cases where it wouldn't have been previously, but this is not a functional change because the callback is identical to the normal buffer write iodone callback when inodes are not attached. Signed-off-by:
-
Dave Chinner authored
The inode log item is kind of special in that it can be aggregating new changes in memory at the same time time existing changes are being written back to disk. This means there are fields in the log item that are accessed concurrently from contexts that don't share any locking at all. e.g. updating ili_last_fields occurs at flush time under the ILOCK_EXCL and flush lock at flush time, under the flush lock at IO completion time, and is read under the ILOCK_EXCL when the inode is logged. Hence there is no actual serialisation between reading the field during logging of the inode in transactions vs clearing the field in IO completion. We currently get away with this by the fact that we are only clearing fields in IO completion, and nothing bad happens if we accidentally log more of the inode than we actually modify. Worst case is we consume a tiny bit more memory and log bandwidth. However, if we want to do more complex state manipulations on the log item that requires updates at all three of these potential locations, we need to have some mechanism of serialising those operations. To do this, introduce a spinlock into the log item to serialise internal state. This could be done via the xfs_inode i_flags_lock, but this then leads to potential lock inversion issues where inode flag updates need to occur inside locks that best nest inside the inode log item locks (e.g. marking inodes stale during inode cluster freeing). Using a separate spinlock avoids these sorts of problems and simplifies future code. This does not touch the use of ili_fields in the item formatting code - that is entirely protected by the ILOCK_EXCL at this point in time, so it remains untouched. Signed-off-by:
-
Dave Chinner authored
This was used to track if the item had logged fields being flushed to disk. We log everything in the inode these days, so this logic is no longer needed. Remove it. Signed-off-by:
-
Dave Chinner authored
In tracking down a problem in this patchset, I discovered we are reclaiming dirty stale inodes. This wasn't discovered until inodes were always attached to the cluster buffer and then the rcu callback that freed inodes was assert failing because the inode still had an active pointer to the cluster buffer after it had been reclaimed. Debugging the issue indicated that this was a pre-existing issue resulting from the way the inodes are handled in xfs_inactive_ifree. When we free a cluster buffer from xfs_ifree_cluster, all the inodes in cache are marked XFS_ISTALE. Those that are clean have nothing else done to them and so eventually get cleaned up by background reclaim. i.e. it is assumed we'll never dirty/relog an inode marked XFS_ISTALE. On journal commit dirty stale inodes as are handled by both buffer and inode log items to run though xfs_istale_done() and removed from the AIL (buffer log item commit) or the log item will simply unpin it because the buffer log item will clean it. What happens to any specific inode is entirely dependent on which log item wins the commit race, but the result is the same - stale inodes are clean, not attached to the cluster buffer, and not in the AIL. Hence inode reclaim can just free these inodes without further care. However, if the stale inode is relogged, it gets dirtied again and relogged into the CIL. Most of the time this isn't an issue, because relogging simply changes the inode's location in the current checkpoint. Problems arise, however, when the CIL checkpoints between two transactions in the xfs_inactive_ifree() deferops processing. This results in the XFS_ISTALE inode being redirtied and inserted into the CIL without any of the other stale cluster buffer infrastructure being in place. Hence on journal commit, it simply gets unpinned, so it remains dirty in memory. Everything in inode writeback avoids XFS_ISTALE inodes so it can't be written back, and it is not tracked in the AIL so there's not even a trigger to attempt to clean the inode. Hence the inode just sits dirty in memory until inode reclaim comes along, sees that it is XFS_ISTALE, and goes to reclaim it. This reclaiming of a dirty inode caused use after free, list corruptions and other nasty issues later in this patchset. Hence this patch addresses a violation of the "never log XFS_ISTALE inodes" caused by the deferops processing rolling a transaction and relogging a stale inode in xfs_inactive_free. It also adds a bunch of asserts to catch this problem in debug kernels so that we don't reintroduce this problem in future. Reproducer for this issue was generic/558 on a v4 filesystem. Signed-off-by:
-
Yafang Shao authored
Remove current_pid(), current_test_flags() and current_clear_flags_nested(), because they are useless. Signed-off-by:
Yafang Shao <laoar.shao@gmail.com> Reviewed-by:
-
Dave Chinner authored
The page faultround path ->map_pages is implemented in XFS via filemap_map_pages(). This function checks that pages found in page cache lookups have not raced with truncate based invalidation by checking page->mapping is correct and page->index is within EOF. However, we've known for a long time that this is not sufficient to protect against races with invalidations done by operations that do not change EOF. e.g. hole punching and other fallocate() based direct extent manipulations. The way we protect against these races is we wrap the page fault operations in a XFS_MMAPLOCK_SHARED lock so they serialise against fallocate and truncate before calling into the filemap function that processes the fault. Do the same for XFS's ->map_pages implementation to close this potential data corruption issue. Signed-off-by:
-
Darrick J. Wong authored
Move the double-inode locking helpers to xfs_inode.c since they're not specific to reflink. Signed-off-by:
-
Darrick J. Wong authored
Refactor the two functions that we use to lock and unlock two inodes to block userspace from initiating IO against a file, whether via system calls or mmap activity. Signed-off-by:
-
Darrick J. Wong authored
Fix the return value of xfs_reflink_remap_prep so that its return value conventions match the rest of xfs. Signed-off-by:
-
